click to Chat Live
Contact YouTube Blog Twitter facebook Turner Motorsport on Instagram
1-800-280-6966
 |   Login
  • 0
 |   Login
Shopping Cart (0) Wishlist
Contact

(0) item(s) in your Shopping Cart
Home
Categories
Specials Gifts & Clothing
  1. Genuine BMW Accessories
  2. Genuine BMW Clothing
  3. Turner Shirts Hats and Gear
  4. Gifts under $25
  5. Gifts under $50
  6. Gifts under $100
  7. Gifts over $100
  8. Gift Certificates
  9. Stocking Stuffers
  10. Gift Packages
Brakes
  1. Brake Overhaul Packages
  2. Brake Pads
  3. Brake Pad Sensors
  4. Brake Rotors
  5. StopTech Big Brake Kits
  6. Stainless Steel Brake Lines
  7. Brake Fluid
  8. Brake Calipers
  9. Caliper Rebuild Kits
  10. Parking Brake Parts
  11. Brake Cooling Ducts & Backing Plates
  12. Brake Pads - Brembo GT BBK Calipers
  13. Brake Pads - StopTech BBK Calipers
Car Care & Accessories
  1. Car Covers
  2. Wheel & Tire Cleaning
  3. Wax, Polish and Cleaning Supplies
  4. Detailing Gear
  5. Leather & Plastic Care
  6. Car Cleaning Supplies
  7. Chassis Paint, Coatings, Sealants, and Rust Conversion
Drivetrain
  1. Differential and Gearing Upgrades
  2. Differential Mounts and Upgrades
  3. OEM Clutch Kits & Clutch Parts
  4. Performance Clutch Kits & Parts
  5. Stock OEM Dual Mass Flywheels
  6. Clutch Parts
  7. UUC Short Shift Kits
  8. Axle Shafts
  9. Driveshafts
  10. Performance Short Shift Kits
  11. Drivershaft Center Support Bearings
  12. Flex Discs & Guibos
  13. Transmission Parts
Engine Chips
  1. Performance Flash Software, 2005+ Models
  2. Sprint Booster Drive-by-Wire Module
Engine Parts
  1. Engine Performance Packages
  2. Water Pumps
  3. Thermostats
  4. Radiators & Cooling System Overhaul Kits
  5. Radiator Hoses, Cooling Hoses, & Hose Sets
  6. External Engine Parts
  7. Drive Belts & V-Belts
  8. Gaskets, Gasket Sets, Seals, & O-Rings
  9. Factory-Spec Replacement Turbos and Kits
  10. Crankcase Vent, PCV, and Oil Separator Systems
  11. Turbo Upgrades and Kits
  12. Electrical Sensors, Switches, & Relays
  13. Ignition Parts
  14. Alternator & Alternator Parts
  15. Starter Motors & Starter Parts
  16. Fuel System Parts
  17. Internal Engine Parts
  18. Cylinder Head Parts & Head Bolts
  19. VANOS Units & Parts
  20. Oil Coolers & Oil Cooler Parts
Exhaust
  1. Supersprint Performance Exhaust Systems
  2. Performance Headers & Downpipes
  3. Turner Motorsport Performance Exhaust
  4. Akrapovic Performance Exhaust Systems
  5. Borla Performance Exhaust Systems
  6. Corsa Performance Exhaust Systems
  7. Dinan Free Flow Exhaust Systems
  8. Performance Exhaust Systems
  9. Exhaust System Upgrades
  10. Exhaust Muffler Tips
  11. Oxygen Sensor - O2 Sensors
  12. Exhaust Gaskets Hangers and Parts
Exterior / Body
  1. Black Grills
  2. Emblems & Decals for Hood, Trunk, and Wheels
  3. Painted Reflectors
  4. Front Spoilers, Bumper Covers, & Air Dams
  5. Rear Spoilers, Rear Wings, & Aprons
  6. Body Trim Parts & Accessories
  7. Carbon Fiber Trunk Lids
  8. License Plate Brackets & License Plate Frames
  9. Mirror Kits & Mirror Parts
  10. Wiper Blades, Wiper Pumps, & Wiper Motor Parts
  11. Hood Pins and AeroCatch Latches
  12. Racing Tow Hooks and Tow Straps
  13. Aero & Body Kits
Intake
  1. aFe Cold-Air Intake Kits
  2. Dinan Cold Air Intake Kits
  3. Gruppe M Cold-Air Intake Kits
  4. Performance Intake Kits
  5. aFe Performance Air Filters
  6. K&N Performance Air Filters
  7. Intake Cleaning & Recharging Kits
  8. Intake Manifold Components (DISA, Vacuum, CCV, Etc)
  9. BOV, Chargepipe, and Intercooler Upgrade Kits
  10. Mass Air Sensor & Air Flow Meters
  11. Throttle Body Parts
  12. Other Intake Kits
Interior
  1. Floor Mats
  2. Gauge Kits and Data Acquisition
  3. Auxiliary Input Adaptors for BMW
  4. Pedal Sets
  5. Escort Radar Detectors
  6. Factory Steering Wheels
  7. Racing Steering Wheels
  8. Shift Knobs, Shift Boots, & Shift Handles
  9. Seats & Seat Accessories
  10. Seat Belts and Racing Harnesses
  11. Cup Holders and Storage
  12. Carbon Fiber Interior Parts
  13. Door Sill Strips
  14. Interior Switches and Switchgear
  15. Sunshades & Windscreens
  16. Interior Trim & Accessories
Lighting
  1. Bulbs for Headlights, Turn Signals and Tail Lights
  2. Stealth Bulbs
Maintenance
  1. Routine Maintenance & Tune-Up Packages
  2. Oil Filters & Oil Filter Kits
  3. Air Filters
  4. Cabin Air Filters, Heppa Filters, & Microfilters
  5. Transmission Filter Kits & Transmission Service Parts
  6. Ignition Coils
  7. Spark Plugs
  8. Bentley Repair / Service Manuals
  9. Service Reset Tools & Fault Code Readers
  10. Anti-Freeze and Coolant
  11. Engine Oils - Genuine BMW and OEM
  12. Power Steering and Hydraulic Fluids
  13. Transmission and Gear Oil - Genuine BMW and OEM
  14. MOTUL Engine Oil and Gear Lubricants
  15. Red Line Oil & Fluids
  16. Liqui-Moly Oil and Additives
Suspension
  1. Shocks & Struts
  2. H&R Performance Springs
  3. Dinan Performance Springs
  4. Spring & Shock Packages
  5. Bilstein PSS PSS9 PSS10 Coil Over Suspensions
  6. H&R Coil Over Suspensions
  7. KW Coil Over Suspensions
  8. Turner Motorsport Racing Suspension Kits
  9. Sway Bar Kits
  10. Sway Bar Links & Sway Bar Parts
  11. Camber / Caster Kits
  12. Strut Braces & Stress Bars
  13. Control Arm Replacements & Upgrades
  14. Suspension Bushings & Mounts
  15. Wheel Bearings & Hub Assemblies
  16. Steering Racks & Power Steering Pumps
  17. Tie Rods & Steering Parts
  18. Coil Over Spring Hardware
  19. CATuned Coilover Kits
  20. Sachs Performance Coil Over Suspension
Wheels
  1. Apex Flow Formed Alloy Wheels
  2. Forgeline Custom Forged Alloy Wheels
  3. HRE FlowForm Performance Alloy Wheels
  4. Vorsteiner Wheels
  5. Rohana Wheels
  6. D Force Flow Formed Alloy Wheels
  7. Dinan Performance Wheels
  8. Alpina Alloy Wheels
  9. Original BMW Wheels and Wheel Upgrades
  10. Turner Motorsport Wheel Spacers
  11. ECS Tuning Wheel Spacers
  12. H&R Wheel Spacers
  13. Wheel Bolts, Wheel Studs and Nuts
  14. Wheel Emblems, Caps, and Accessories
  15. High Performance Wheels
Tools
  1. Alignment Tools
  2. Battery Chargers and Tenders
  3. Brake Tools
  4. Coil Over Wrenches
  5. Cooling System Tools
  6. Cylinder Head and VANOS Tools
  7. Exhaust Tools
  8. Fan and Fan Clutch Tools
  9. Fault Code Readers and OBD Scan Tools
  10. Fuel System Tools
  11. Genuine BMW Tool Kits
  12. Oil Service Tools
  13. Sockets
  14. Spark Plug Sockets
  15. Transmission and Differential Tools
  16. Wheel Pin Tools
  17. Workshop Chemicals
Clearance
Choose BMW
BMW 1 Series
  1. (E82) 1-series Coupe 2008+
  2. (E88) 1-series Convertible 2008+
BMW 2 Series
  1. (F22) 2-Series Coupe 2014+
  2. (F23) 2-Series Convertible 2014+
  3. (F87) M2 2016+
BMW 3 Series
  1. (E21) 3-Series 1977-1983
  2. (E30) 3-series 1984-1991
  3. (E30) M3 1988-1991
  4. (E36) 3-series 1992-1999
  5. (E36) M3 1995-1999
  6. (E46) 3-Series 1999-2005
  7. (E46) M3 2001-2006
  8. (E90) 3-Series Sedan 2006-2011
  9. (E90) M3 Sedan 2008-2013
  10. (E91) 3-Series Touring 2006-2013
  11. (E92) 3-Series Coupe 2007-2013
  12. (E92) M3 Coupe 2008-2013
  13. (E93) 3-Series Convertible 2007-2013
  14. (E93) M3 Convertible 2008-2013
  15. (F30) 3-Series Sedan 2012+
  16. (F31) 3-Series Touring 2014+
  17. (F80) M3 2015+
  18. (F34) 3-Series Gran Turismo 2014+
BMW 4 Series
  1. (F32) 4-Series Coupe 2014+
  2. (F33) 4-Series Convertible 2015+
  3. (F34) 4-Series Gran Turismo 2014+
  4. (F82) M4 Coupe 2015+
  5. (F83) M4 Convertible 2015+
  6. (F36) 4-Series Gran Coupe 2015+
BMW 5 Series
  1. (E34) M5 1991-1993
  2. (E39) M5 2000-2003
  3. (E60) M5 2006-2010
  4. (E28) 5-Series 1982-1988
  5. (E34) 5-Series 1989-1995
  6. (E39) 5-Series 1996-2003
  7. (E60) 5-Series Sedan 2004-2010
  8. (E61) 5-Series Touring 2006-2010
  9. (F10) 5-Series 2011+
  10. (G30) 5-Series 2017+
BMW 6 Series
  1. (E24) 6-Series 1977-1989
  2. (E63) 6-Series Coupe 2004-2010
  3. (E64) 6-Series Convertible 2004-2010
  4. (F06) 6-Series Gran Coupe 2013+
  5. (F12) 6-Series Coupe 2011+
  6. (F13) 6-Series Convertible 2011+
BMW 7 Series
  1. (E32) 7-Series 1988-1994
  2. (E38) 7-Series 1995-2001
  3. (E65) 7-Series SWB 2002-2007
  4. (E66) 7-Series LWB 2002-2007
  5. (F01) 7-Series SWB 2009+
  6. (F02) 7-Series LWB 2009+
BMW 8 Series BMW Classics (E9, Bavaria, Isetta, etc)
  1. 2500
  2. 2800
  3. 3.0Si
  4. Bavaria
  5. 2800CS
  6. 3.0CS
  7. 2002
  8. 2002tii
  9. (E12) 528i 1977-1981
  10. (E12) 530i 1975-1978
BMW X Series (SAV)
  1. (E84) X1 Series 2013+
  2. (E83) X3 2004-2010
  3. (F25) X3 2011+
  4. (F26) X4 2015+
  5. (E53) X5 2000-2006
  6. (E70) X5 2007-2013
  7. (F15) X5 2014+
  8. (F85) X5 M 2015+
  9. (E71) X6 2008+
  10. (F16) X6 2015+
  11. (F86) X6 M 2015+
  12. (F48) X1 2016+
  13. (F48) X1 (2016+)
BMW Z Series
  1. (E36/7) Z3 1997-2002
  2. (E85) Z4 M Roadster
  3. (E85/E86/E89) Z4 2003+
  4. (E86) Z4 M Coupe
  5. (E52) Z8 2000-2003
BMW 1600-2002 / tii BMW i Series
  1. (I01) BMW i3 2014+
  2. (I12) BMW i8 2014+
MINI Cooper and Cooper S
Racing
Racing Home Racing News Racing Schedule Racing Photo Gallery
Gallery
Photo Gallery Wallpaper Project Cars
  1. Project i8
  2. Project F80 M3
  3. Turner F82 M4
  4. Turner X5 M
  5. Turner F22 2 Series
  6. Turner F13 M6
  7. Turner F10 M5
  8. Turner F30 335i
  9. Turner E9X M3
  10. Turner E92 335i
  11. Turner E82 1 Series
  12. Turner ActiveE (100% Electric)
  13. Turner E46 M3
  14. Turner E46 330i ZHP
  15. Turner E36 M3
  16. Turner E30 M3
  17. Turner MINI Cooper S
  18. McLaren F1
  19. Turner E92 M3 Lime Rock
  20. Turner F80 M3 Silverstone
Video Gallery
Projects
Turner BMW i8 Turner BMW F80 M3 Turner BMW F82 M4 Turner BMW X5 M Turner BMW F22 2 Series Turner BMW F13 M6 Turner BMW F10 M5 Turner BMW F30 335i Turner BMW E9X M3 Turner BMW E92 335i Turner BMW E82 1 Series Turner BMW ActiveE (100% Electric) Turner BMW E46 M3 Turner BMW E46 330i ZHP Turner BMW E36 M3 Turner BMW E30 M3 Turner MINI Cooper S McLaren F1 Turner BMW E92 M3 Lime Rock Turner BMW F80 M3 Silverstone
About Us
About Turner Motorsport Customer Feedback The Turner Team
  1. Open Positions
Returns Policy Shipping Info Contact Us Privacy Policy Security Policy FAQs

BMW F30 aFe Cold-Air Intake Kits

BMW F30 aFe Cold-Air Intake Kits Founded in 1999, Advanced Flow Engineering (aFe) produces high flow, high performance replacement air filters and complete cold-air intake systems for BMWs. Each precision-engineered intake component and filter offers excellent design and construction, lifetime cleanable cotton filters that breathe easier than paper filters, powder-coated heat shields to block out hot engine air, and measurable performance gains resulting in increased horse power and torque. aFe's reputation is fast growing as a manufacturer and designer of quality and functional intake kits with excellent fit and finish and reasonable cost.

aFe enigneers their kits for each individual model application, even designing air filters from scratch to maximize the available surface area of the low pressure zone. They then offer their intake components in packages that fit your tastes and needs -
Replacement Performance Filter. A direct performance replacement filter for your stock air box.
Dynamic Air Scoops. Metal scoops or ducts that create a 'ram-air' effect to the intake.
Super Stock System. A performance filter combined with Dynamic Air Scoops and Throttle Body Spacer for power gains while keeping the OEM appearance.
Stage 1 Kit. A cone-filter kit with vehicle-specific heat shield and intake tubing to replace a stock airbox.
Stage 2 Kit. All of the components in a Stage 1 Kit plus additional intake tubing or ducting after the air box or air mass meter.
Sealed Intake. A Stage 1 or 2 Kit with an enclosed airbox and heat shield. The filter area is maximized inside a vehicle-specific airbox and then sealed with a cover for a OEM-type appearance.
You're currently viewing parts for your (F30) 3-Series Sedan 2012+. Reset your chassis
For accurate results, specify your model below.
aFe Restore Kit for ProDry S Dry Filters This eco-friendly air filter cleaner is for the aFe Pro Dry S performance air filter. Simply spray on and wash off and your Pro Dry S air filter is good to go. Please follow the instrucctions with the kit and you will have a lifetime of horsepower.
Part #: 90-59999
Price: $19.95 (USD) 
Free Shipping Free Shipping
Quantity:   
Magnum FORCE Intake Scoop - Red

The Dynamic Air Scoop (D.A.S.) from aFe Power is a very simple, bolt-on product that increases air flow and velocity through the factory kidney bean grille. This lightweight rotomold intake scoop is red for a more noticeable appearance. You will notice the improved throttle response as the speed of your intake air flow is increased.

This scoop is a perfect addition to an aFe Stage 2 Sealed intake system part number 54-82202 and 51-82202. All necessary hardware is included.

Part #: 54X12208-R
Price: $49.00 (USD) 
Quantity:   
aFe Intake Kit - F30 335i F32 435i 2012+ - Stage 2 Intake Pro5R or ProDry S This aFe Stage 2 cold air intake system for BMW F30 335i and F32 435i with the N55 engine, produces 14 max horsepower, 18 lbs. x ft. torque and out-flowed the factory intake by 29%. This system includes a durable 18-gauge, powder-coated heat shield and features either a washable/reusable conical Pro 5R filter for maximum flow or a Pro Dry S filter for lower maintenance requirements. This air filter is constructed with 100% polyurethane, for long life and multiple cleaning cycles. A huge 3.5 inch one-piece mandrel bent wrinkle-black powder-coated intake tube, maximizes air velocity providing maximum performance and throttle response. This is a direct bolt-on kit and requires no cutting or drilling. 

Filter Flange Retention Design:  
The air filter uses a unique (patent pending) flange retention design that requires no hardware to mount the filter to the heat shield to provide a quick hassle-free installation with minimal hardware. 

One-Piece Intake Tube:  
A large mandrel-bent intake tube is used to smoothly direct the increased air flow into the engine for maximum performance. 

6" Tall Conical Filter:  Choose either Pro Dry S performance air filter for maximum convenience or Pro5r oiled filter for maximum flow for increased horsepower and torque. This intake utilizes a huge, 6" tall conical performance air filter for increased performance. The PRO 5R air filter uses five layers of progressively finer mesh cotton gauze media to provide maximum airflow for best performance results. Washable and reusable for multiple cleaning cycles, the tall, open, evenly spaced pleats provide excellent dust holding capacity for a longer service cycle between cleanings. 

One-Piece Filter Housing:  The air filter is housed in a one-piece, black powder-coated 18-gauge heat shield that keeps warm engine air out for maximum performance. This one-piece heat shield uses factory mounting locations and comes with all hardware for a hassle-free installation. 

Easy Installation:  aFe has developed this intake to provide a hassle-free installation that utilizes all factory mounting locations. 

Dyno Tested Intake Tube:  The intake tube is designed to maximize air velocity and is dyno tested and flowed using the latest engineering tools for maximum performance, mileage and throttle response. 

Note: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles. 

Choose from 54-12202 Pro5R kit or 51-12202 ProDrys kit. 

This item fits the following BMWs:  
2014+  F22 BMW  M235i M235i xDrive 
2012+  F30 BMW  335i 335i xDrive - Sedan 
2013+  F32 BMW  435i 435i xDrive - Coupe 
Part #: 5X-12202
Price: $466.95 (USD) 
Magnum FORCE Intake Scoop - Blue

The Dynamic Air Scoop (D.A.S.) from aFe Power is a very simple, bolt-on product that increases air flow and velocity through the factory kidney bean grille. This lightweight rotomold intake scoop is blue for a more noticeable appearance. You will notice the improved throttle response as the speed of your intake air flow is increased.

This scoop is a perfect addition to an aFe Stage 2 Sealed intake system part number 54-82202 and 51-82202. All necessary hardware is included.

Part #: 54-12218-L
Price: $49.00 (USD) 
Quantity:   
AFe Intake KIt - Momentum GT With Carbon Fiber Accent - N55 BMW F87 M2, F30 335ix, F31/34 335i/ix, F32/33/36 435i/ix, F20/21 135i/ix, F22 M235i

HP Gain: +15hp
Trq Gain: +13ft-lbs
Airflow: +20% over stock

aFe has engineered the Momentum GT intake to outperform the stock air box and deliver substantial power and torque gains over the factory system. The system has been CAD designed to achieve the maximum volumetric flow rate into the turbo. The intake tube is a smooth, unobstructed single piece from the air inlet to the airbox and incorporates a port for the air flow sensor. aFe's advanced engineering and design have made this a direct bolt-in intake upgrade.

The aFe filter has been designed specifically for this application and uses aFe's high flow/low maintenance design. The ProDry S filter has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe Pro5R filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

 

Fitment:

  • 2012-2015 F30 BMW 335ix  3.0L N55 
  • 2013-2015  F31/34 BMW 335i/ix 3.0L N55 
  • 2014-2016 F32/33/36 BMW 435i/ix  3.0L N55 
  • 2012-2016 F20/21 BMW M135i/ix 3.0L N55 
  • 2014-2016 F22 BMW M235i  3.0L N55
Part #: 5276311AFE
Price: $616.95 (USD) 
aFe Restore Kit for Pro5R Oiled Filters

Bring your aFe filter back to life with a Restore kit from aFe. Included is filter cleaner & replacement oil. These air filter oils is designed to not harm MAF sensors, while allowing the filter to catch as much debris as possible.

Used for Pro 5 R filters

Part #: 55-10460
Price: $17.95 (USD) 
Quantity:   
Magnum FORCE Carbon Fiber Intake Scoop

AFE Summer Rebate Form

The Dynamic Air Scoop (D.A.S.) from aFe Power is a very simple, bolt-on product that increases air flow and velocity through the factory kidney bean grille. This lightweight rotomold intake scoop is made of carbon fiber. You will notice the improved throttle response as the speed of your intake air flow is increased.

This scoop is a perfect addition to an aFe Stage 2 Sealed intake system part number 54-82202 and 51-82202. All necessary hardware is included.

Part #: 54-12218-C
Price: $99.00 (USD) 
Free Shipping Free Shipping
Quantity:   
aFe Dynamic Air Scoops (DAS) - F30 320i, 328i 2012+ Direct more fresh cool air from your BMW's center/nose grills to your intake, with the aFe D.A.S. (Dynamic Air Scoops). This "scoop" installs behind your front grills to direct more airflow into the factory intake snorkel used on the 2012 (and newer) F30 328i with N20 turbo engine. The scoop is a direct bolt-in install, and includes installation instructions and required hardware for a simple install. When combined with a higher flowing filter, such as the aFe stock replacement filter these scoops help get the maximum benefit of a higher efficiency filter by providing more cool, fresh outside air directly into the intake snorkel. F30 aFe Intake Scoop Instructions

These aFe Intake Scoops fit the following BMWs:
2012+ F30 BMW 320i, 320i xDrive, 328i 328i xDrive - Sedan
2013+ F31 BMW 328i xDrive - Wagon
Part #: 54-12218
Price: $49.00 (USD) 
Free Shipping Free Shipping
Quantity:   
AFE Momentum GT Pro 5R Cold Air Intake System -- B58 340i/ix 440i/ix

HP Gain: +13hp
Trq Gain: +13ft-lbs
Airflow: +28% over stock

aFe has engineered the Momentum GT intake to outperform the stock air box and deliver substantial power and torque gains over the factory system. The B58 3.0L Turbo benefits from aFe's oversized cotton filter element in a Rotomold plastic housing that blocks heat saturated air while flowing more volume of cooler dense air. The system has been CAD designed to achieve the maximum volumetric flow rate into the turbo. The intake tube is a smooth, unobstructed single piece from the air inlet to the airbox and incorporates a port for the air flow sensor. aFe's advanced engineering and design have made this a direct bolt-in intake upgrade.

The aFe filter has been designed specifically for this application and uses aFe's highest-flowing filter material and design. The Pro5R filter uses five layers of progressively finer mesh cotton gauze media to provide maximum airflow for best performance results. Washable and reusable for multiple cleaning cycles, the tall, open, evenly spaced pleats provide excellent dust holding capacity for a longer service cycle between cleanings. This intake is also available in a traditional paper filter media.

Features:

  • +13 HP and +13 lbs. x ft. Torque max gains
  • Outflows factory intake by up to 28%
  • High Quality One-Piece Roto-Molded Sealed Housing with Auxiliary Air Scoop
  • CAD-Designed Roto-Molded Intake Tube
  • Lightweight high gloss, clear-coated 2 x 2 twill-weave carbon fiber trim on housing for styling
  • Built-In Sight Window Provides Easy Inspection of Filter Without Disassembly
  • Pro 5R oiled 5-Layer Progressively Finer Mesh Cotton Gauze Oiled Media for Maximum Performance
  • Unique (Patent Pending) Filter-to-Housing Interface for Easy Installation
  • No Cutting or Drilling on factory Parts for Faster Installation
Part #: 54-76309
Price: $458.42 (USD) 
$549.00
Limited Qty Sale
Quantity:   
aFe Throttle Body Spacer - E9X 335i/xi 2011+ w N55 engine, F30 335i, F32 435i Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque - +6 hp, +13 lbs/ft torque - and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers. This spacer was dynoed with a aFe air filter and dynamic air scoop.

This item fits the following BMWs:
2014+ F22 BMW M235i M235i xDrive
2011 E90 BMW 335i 335xi 335i xDrive - Sedan
2011-2012 E92 BMW 335i 335xi 335i xDrive - Coupe
2011-2012 E93 BMW 335i - Convertible
2012+ F30 BMW 335i 335i xDrive - Sedan
2013+ F32 BMW 435i 435i xDrive - Coupe
2014+ F34 BMW 335i xDrive GT - Gran Tourismo
2014+ F36 BMW 435i Gran Coupe 435i xDrive Gran Coupe
2013+ E84 BMW X1 xDrive35i
2011+ F25 BMW X3 xDrive35i
2015+ F26 BMW X4 xDrive35i
ONLY for cars with N55 twin scroll turbo engine.
Part #: 46-31007
Price: $299.00 (USD) 
Free Shipping Free Shipping
Quantity:   
F3X 328d AFE Momentum GT ProDry S Cold Air Intake System

HP Gain: +15hp
Trq Gain: +28ft-lbs
Airflow: +53% over stock

aFe has engineered the Momentum GT intake to outperform the stock air box and deliver substantial power and torque gains over the factory system. The Diesel 328d benefits from aFe's oversized cotton filter element in a Rotomold plastic housing that blocks heat saturated air while flowing more volume of cooler dense air. The system has been CAD designed to achieve the maximum volumetric flow rate into the turbo. The intake tube is a smooth, unobstructed single piece from the air inlet to the airbox and incorporates a port for the air flow sensor. aFe's advanced engineering and design have made this a direct bolt-in 328d intake upgrade.

The aFe filter has been designed specifically for this application and uses aFe's high flow/low maintenance design. The ProDry S filter has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe Pro5R filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

Part #: 51-76307
Price: $499.00 (USD) 
Quantity:   
Pro DryS Stage 2 Dynamic Air Intake System

AFE Summer Rebate Form

AFE Pro DryS Dynamic Air Intake System – Stage 2 uses three layer, washable synthetic media filtration for improved engine protection. Dry filters are MAF safe.

Kit includes two cone filters; 16 gauge powder coated heat shield; one-piece intake tube, dynamic air scoops that create ram air effect behind kidney grilles, plus a filter restore kit at no additional charge.

Dyno proven power increases of 11 horsepower and 15 lb-ft torque.

Air filter service at recommended intervals lets an engine breathe properly while protecting it from costly damage. Air filters should be inspected and replaced as needed at least once a year, more often if the vehicle is driven in heavily polluted or dusty conditions.

Part #: 51-12212
Price: $449.00 (USD) 
Free Shipping Free Shipping
Quantity:   
Magnum FORCE Intake Scoop - Blue

The Dynamic Air Scoop (D.A.S.) from aFe Power is a very simple, bolt-on product that increases air flow and velocity through the factory kidney bean grille. This lightweight rotomold intake scoop is blue for a more noticeable appearance. You will notice the improved throttle response as the speed of your intake air flow is increased.

This scoop is a perfect addition to an aFe Stage 2 Sealed intake system part number 54-82202 and 51-82202. All necessary hardware is included.

Part #: 54X12208-L
Price: $49.00 (USD) 
Quantity:   
Momentum Intake System - Pro 5R

AFE Summer Rebate Form

This all new Momentum Sealed Intake System produced 10hp and 14lbs. x ft. torque and outflows the factory intake by 42%. This system uses a PRO DRY S progressive mesh three layer synthetic "oil free" filter for maximum airflow and convenience. Also included is a unique, patent pending sealed airbox design to increase airflow using the factory air ram air scoop for maximum torque in all weather situations. The kit comes complete will all necessary hardware. Note: Does not fit vehicle with N26 engine. N26 engine is SULEV (super low emission) version of N20

3-1/2"Conical Pro 5R Air Filter: This intake utilizes a huge, 3-1/2" tall conical PRO 5R performance air filter for increased performance. The PRO 5R air filter uses five layers of progressively finer mesh cotton gauze media to provide maximum airflow for best performance results. Washable and reusable for multiple cleaning cycles, the tall, open, evenly spaced pleats provide excellent dust holding capacity for a longer service cycle between cleanings.

One-Piece Filter Housing: The air filter is housed in a one-piece, patent pendging black roto-molded airbox that keeps warm engine air out for maximum performance. This one-piece airbox uses factory mounting locations for a hassle-free installation.

Dyno Tested Intake Tube: The intake tube is designed to maximize air velocity and is dyno tested and flowed using the latest engineering tools for maximum performance, mileage and throttle response.

Horizontal Louvers: The louvers were added to the roto-molded airbox to increase the cold air to the air filter.

Part #: 54-82212
Price: $495.00 (USD) 
Free Shipping Free Shipping
Quantity:   
F3X 328d aFe Momentum GT Pro 5R Cold Air Intake System

HP Gain: +15hp
Trq Gain: +28ft-lbs
Airflow: +53% over stock

aFe has engineered the Momentum GT intake to outperform the stock air box and deliver substantial power and torque gains over the factory system. The Diesel 328d benefits from aFe's oversized cotton filter element in a Rotomold plastic housing that blocks heat saturated air while flowing more volume of cooler dense air. The system has been CAD designed to achieve the maximum volumetric flow rate into the turbo. The intake tube is a smooth, unobstructed single piece from the air inlet to the airbox and incorporates a port for the air flow sensor. aFe's advanced engineering and design have made this a direct bolt-in 328d intake upgrade.

The aFe filter has been designed specifically for this application and uses aFe's highest-flowing filter material and design. The Pro5R filter uses five layers of progressively finer mesh cotton gauze media to provide maximum airflow for best performance results. Washable and reusable for multiple cleaning cycles, the tall, open, evenly spaced pleats provide excellent dust holding capacity for a longer service cycle between cleanings. This intake is also available in a traditional paper filter media.

Part #: 54-76307
Price: $499.00 (USD) 
Quantity:   
AFE Momentum GT Pro DRY S Cold Air Intake System -- B58 340i/ix 440i/ix

HP Gain: +13hp
Trq Gain: +13ft-lbs
Airflow: +28% over stock

aFe has engineered the Momentum GT intake to outperform the stock air box and deliver substantial power and torque gains over the factory system. The B58 3.0L Turbo benefits from aFe's oversized cotton filter element in a Rotomold plastic housing that blocks heat saturated air while flowing more volume of cooler dense air. The system has been CAD designed to achieve the maximum volumetric flow rate into the turbo. The intake tube is a smooth, unobstructed single piece from the air inlet to the airbox and incorporates a port for the air flow sensor. aFe's advanced engineering and design have made this a direct bolt-in intake upgrade.

The aFe filter has been designed specifically for this application and uses aFe's high flow/low maintenance design. The ProDry S filter has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe Pro5R filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

Features:

  • +13 HP and +13 lbs. x ft. Torque max gains
  • Outflows factory intake by up to 28%
  • High Quality One-Piece Roto-Molded Sealed Housing with Auxiliary Air Scoop
  • CAD-Designed Roto-Molded Intake Tube
  • Lightweight high gloss, clear-coated 2 x 2 twill-weave carbon fiber trim on housing for styling
  • Built-In Sight Window Provides Easy Inspection of Filter Without Disassembly
  • Pro 5R oiled 5-Layer Progressively Finer Mesh Cotton Gauze Oiled Media for Maximum Performance
  • Unique (Patent Pending) Filter-to-Housing Interface for Easy Installation
  • No Cutting or Drilling on factory Parts for Faster Installation
Part #: 51-76309
Price: $549.00 (USD) 
Quantity:   
Magnum FORCE Intake Scoop  --  F30/32/33 335i/xi 435i/xi F87 M2

The Dynamic Air Scoop (D.A.S.) from aFe Power is a very simple, bolt-on product that increases air flow and velocity through the factory kidney bean grille. This lightweight rotomold intake scoop is black for a stealth appearance. You will notice the improved throttle response as the speed of your intake air flow is increased.

This scoop is a perfect addition to an aFe Stage 2 Sealed intake system part number 54-82202 and 51-82202. All necessary hardware is included.

Part #: 54-12208
Price: $49.00 (USD) 
Free Shipping Free Shipping
Quantity:   
aFe Intake Kit - F30 328i F32 428i F22 228i - Stage 2 Intake Pro5R or ProDry S

This Stage-2 cold air intake system for the F30 328i with N20 engine, resulted in 11 max horsepower, 15 lbs. x ft. torque and out-flowed the factory intake by 38% on the 2012+ BMW 328i (F30) N20 Turbo. This system includes a durable 18-gauge, powder-coated heat shield and features a either a washable/reusable conical Pro 5R air filter for maximum flow or a ProDry S :oil-free" filter for maximum convenience. The Pro 5R air filter uses five layers of progressively finer mesh cotton gauze oiled media to provide maximum airflow for best performance results. The PRO DRY S air filter uses three layers of progressively finer mesh cotton gauze media to provide maximum airflow for best performance results. A 3 inch one-piece mandrel bent wrinkle-black powder-coated intake tube and bracket, maximizes air velocity providing maximum performance and throttle response. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.

  • 7" Conical Air Filter - Choose either Pro Dry S performance air filter for maximum convenience or Pro5r oiled filter for maximum flow for increased horsepower and torque.
  • Dyno Tested Intake Tube: The intake tube is designed to maximize air velocity and is dyno tested and flowed using the latest engineering tools for maximum performance, mileage and throttle response.
  • One-Piece Heat-Shield: The air filter is housed in a one-piece, black powder-coated 18-gauge heat shield that keeps warm engine air out for maximum performance. This one-piece heat shield snaps onto the lower half of the factory air box to provide a quick and easy installation utilizing factory mounting locations.
  • Optional Intake Cover-Interested in reducing air intake noise on your 5X-12212 stage-2 intake for the 2012-2014 BMW 328i (F30)? aFe Power now offers an intake cover to do just that. This lightweight vacuum form plastic cover bolts right up to the intake housing and comes with all necessary hardware, no modification is necessary.

Choose from 54-12212 Pro5R kit or 51-12212 ProDryS kit

This aFe intake fits the following BMWs:
2014+ F22 BMW 228i 228i xDrive
2012+ F30 BMW 320i 320i xDrive 328i 328i xDrive - Sedan
2013+ F31 BMW 328i xDrive - Wagon
2014+ F32 BMW 428i Coupe & Convertible, 428i xDrive Coupe & Convertible
Only for cars with N20 engine

Part #: 54-12212-X
Price: $466.95 (USD) 
AFe SCORCHER GT Power Package - B58 340i/ix and 440i/ix

There's no secret to getting additional power from a turbo engine - turn up the boost! But it's easy to take things too far and become "boost drunk". If what you're after is a generous bump in power without worrying about reliability, compromises, or additional modifications the aFe Power Scorcher is perfect for you. We've tried the Scorcher in a number of different BMWs and can report back that it works flawlessly! This module is paired with the Momentum GT air intake system and restore kit to allow for as much airflow as possible.

The Scorcher is a plug-and-play tuning module that installs on the engine wiring harness and modifies the signals from the manifold pressure sensors. The new signals are then sent to the engine computer which increases boost based on the modified signal. The power gains are instantly noticeable and the module has been fully engineered to deliver a smooth and reliable power boost over all RPM. aFe developed this module upgrade on their in-house Mustang and Dynojet dynos. There are other products that give more power (for additional cost and complexity) but more boost also brings more complications. This is all of the power you need without additional drama and trickery. The Scorcher can be used on its own or combined with other aFe Power products for the total package. 

The install is very easy with no cutting or modification to existing components. Unplug the harness from your MAP sensors and plug it into the Scorcher module. Then plug the Scorcher harness into the MAP sensors. Mount the module wherever you wish (Velcro and zip ties included). A blue LED lets you know the module is plugged in correctly and functioning. You can also revert back to stock just as easily! The Scorcher is built with a 0.1% tolerance on critical components. Each connector is an OE type for the best and most secure fitment and they use high quality wiring with excellent heat and chemical resistance. The module box is aluminum with a hardcoat anodize finish. This is way beyond the other 'resistor in a box' products on the market. aFe warranties the complete unit for two years. 

This module features on-the-fly power adjustment using a single button controller that effortlessly adjusts from multiple modes of power control, including stock, sport, sport +, and race!

The included Momentum GT Intake features a one-piece housing with a clear window for hassle free filter inspection, a dyno-tuned intake tube designed to achieve maximum power gains, and 2 large performance air filters, Pro 5R and  Pro Dry S, that are 7.5" tall with an inverted top conical air filters and give you the choice to run an oiled or dry filter with your intake.

Features: 

  • Performance Package Includes Momentum GT air intake system + SCORCHER GT module (P/N: 77-46318) + Restore kit (P/N: 90-50501)
  • +58 HP and +83 lbs. x ft. Torque max gains
  • High Quality One-Piece Sealed Housing with Auxiliary Air Inlet
  • CAD-Designed Roto-Molded Intake Tube
  • Lightweight high gloss, clear-coated 2 x 2 twill-weave carbon fiber trim on housing for styling
  • Includes both Pro Dry S oil-free & Pro 5R oiled, washable/reusable performance air filters
  • Unique Filter-to-Housing Interface for Easy Installation (US PAT 9440175)
  • SCORCHER GT module increase turbo boost to improve vehicle performance, efficiency and throttle response
  • In-Cabin On-the-Fly Power Adjustments via LED light switch
  • 4-power position settings: Stock (Green), Sport (Yellow), Sport+ (Orange) and Race (Red)
  • Leaves no trace on ECU (No Footprint)

Fitment:

2016+ F30/1/4 BMW 340i/ix  w/ B58 engine
2016+ F32/3/6 BMW 440i/ix  w/ B58 engine

Part #: 77-46318-PK
Price: $999.00 (USD) 
Quantity:   
AFe MagnumFORCE Stage-2 Pro DRY S "Oil-Free" ProDry S Filter

This intake kit replaces the top-half of both your factory air boxes. It features two 3-angle aluminum velocity stack adapters, 1.6mm powder-coated steel heat shields, trim sealed to seal out hot engine air, two custom aFe brand cotton filters, all hardware, and installation instructions.

This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

By removing your stock intake air box, you are removing the most restrictive portion of your engine's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
Part #: 51-12202
Price: $449.00 (USD) 
Free Shipping Free Shipping
Quantity:   
aFe Intake Kit - F30 335i F32 435i 2012+ - Stage 2 Si Sealed Intake Pro5R or ProDry S

This Stage 2 Sealed Intake for BMW F30 335ii with N55 turbo motor, produces 11HP, 15LBS. x FT. of torque and outflows the factory intake by 37%. This sealed air intake system features a washable/reusable 7.5" conical air filter that improves airflow for increased horsepower, torque and throttle response. The air filter is constructed with 100% polyurethane for long life and multiple cleaning cycles.The sealed housing features three auxiliary air inlet ducts for increased airflow. To finish off your underhood appearance, an attractive vacuum formed ABS plastic cover is used to provide easy access to the filter for servicing and an aggressive look. To complete this system, a dyno tuned molded plastic intake tube with velocity stack adapter replaces the stock intake tract and directs air flow with improved volumetric efficiency for maximum intake velocity.

  • 7.5" Conical Air Filter - Choose either Pro Dry S performance air filter for maximum convenience or Pro5r oiled filter for maximum flow for increased horsepower and torque. This intake utilizes a huge, 7-1/2" tall conical PRO 5R performance air filter for increased performance. The PRO 5R air filter uses five layers of progressively finer mesh cotton gauze media to provide maximum airflow for best performance results. Washable and reusable for multiple cleaning cycles, the tall, open, evenly spaced pleats provide excellent dust holding capacity for a longer service cycle between cleanings.
  • One-Piece Filter Housing - The air filter is housed in a one-piece, patent pending black roto-molded airbox that keeps warm engine air out for maximum performance. This one-piece airbox has a built in clear sight window which allows you to inspect the filter with no disassembly.
  • Dyno Tested Intake Tube: - this system uses a C.A.D. designed intake tube which is dyno tuned to achieve maximum power gains while maintaining a perfect fit.
  • Horizontal Louvers: The louvers were added to the roto-molded airbox to increase the cold air to the air filter.
  • Housing/Air Filter Interface: This intake system features a unique patent pending filter to air box interface that creates a flawless seal.

 

Choose from 54-82202 Pro5R kit or 51-82202 ProDrys kit.


This aFe intake fits the following BMWs:
2014+ F22 BMW M235i M235i xDrive
2012+ F30 BMW 335i 335i xDrive - Sedan
2013+ F32 BMW 435i 435i xDrive - Coupe

Part #: 5X-82202
Price: $529.00 (USD) 
aFe Carbon Fiber Dynamic Air Scoops (DAS) - F30 335i 2012+, F32 435i Direct more fresh cool air from your BMW's center/nose grills to your intake, with the aFe D.A.S. (Dynamic Air Scoops). This "scoop" installs behind your front grills to direct more airflow into the factory intake snorkel used on the 2012 (and newer) F30 335i with N55 turbo engine. The scoop is a direct bolt-in install, and includes installation instructions and required hardware for a simple install. When combined with a higher flowing filter, such as the aFe stock replacement filter these scoops help get the maximum benefit of a higher efficiency filter by providing more cool, fresh outside air directly into the intake snorkel. F30 335i aFe Intake Scoop Instructions

These aFe Intake Scoops fit the following BMWs:
2012+ F30 BMW 335i 335i xDrive - Sedan
2013+ F32 BMW 435i 435i xDrive - Coupe
2013+ F33 BMW 435i Convertible - Convertible
Part #: 54-12208-C
Price: $99.00 (USD) 
Free Shipping Free Shipping
Quantity:   
aFe Intake Kit - F22 228i, F30 328i, and F32 428i - Stage 2 Sealed Intake Pro5R or ProDry S

This Stage 2 Sealed Intake for BMW F30 328i and F32 428i with N20 turbo motor, produces 10HP, 14LBS. X FT. of torque and outflows the factory intake by 42%. This sealed air intake system features a washable/reusable 6" conical air filter with inverted top that improves airflow for increased horsepower, torque and throttle response. The air filter is constructed with 100% polyurethane for long life and multiple cleaning cycles.The sealed housing features two auxiliary air inlet ducts for increased airflow. To finish off your underhood appearance, an attractive vacuum formed ABS plastic cover with carbon fiber finish is used to provide easy access to the filter for servicing and an aggressive look. To complete this system, a dyno tuned molded plastic intake tube with velocity stack adapter replaces the stock intake tract and directs air flow with improved volumetric efficiency for maximum intake velocity.
 

  • 3.5" Conical Air Filter - Choose either Pro Dry S performance air filter for maximum convenience or Pro5r oiled filter for maximum flow for increased horsepower and torque.
  • Fully Sealed Design - The air filter is housed in a one-piece, patent pending, black roto-molded air box that keeps warm engine air out for maximum performance.
  • Mounts In Factory Location - aFe has developed this intake to provide a hassle-free installation that utilizes all factory mounting locations.
  • Dyno Tested Intake Tube: The intake tube is designed to maximize air velocity and is dyno tested and flowed using the latest engineering tools for maximum performance, mileage and throttle response.
  • Horizontal Louvers: The louvers were added to the roto-molded airbox to increase the cold air to the air filter.
  • Please choose either N20 ULEV (ultra low emission vehicle) or N26 SULEV (Super Low Emission Vehicle). The N26 engine was optional in markets with stricter emissions standards such as California and New York.

    Choose from 54-82212 Pro5R kit or 51-82212 ProDryS kit

    This aFe intake fits the following BMWs:
    2014+ F22 BMW 228i 328i xDrive
    2012+ F30 BMW 320i 320i xDrive 328i 328i xDrive - Sedan
    2013+ F31 BMW 328i xDrive - Wagon
    2014+ F32 BMW 428i Coupe & Convertible, 428i xDrive Coupe & Convertible
Part #: 54-82212-X
Price: $512.95 (USD) 
Get notified about money saving
specials & deals for your BMW
enter your email address
  • 22 years of BMW Tuning.
  • Award winning service.
  • 10,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook




    • 1-800-280-6966
      Mon-Thur 9am-6pm ET, Fri 9am-5pm ET

      • © TurnerMotorsport.com 1993-2017. All Rights Reserved.