click to Chat Live
Contact YouTube Blog Twitter facebook Turner Motorsport on Instagram
1-800-280-6966
 |   Login
  • 0
 |   Login
Shopping Cart (0) Wishlist
Contact

(0) item(s) in your Shopping Cart
Home
Categories
Specials Gifts & Clothing
  1. Genuine BMW Accessories
  2. Genuine BMW Clothing
  3. Turner Shirts Hats and Gear
  4. Gifts under $25
  5. Gifts under $50
  6. Gifts under $100
  7. Gifts over $100
  8. Gift Certificates
  9. Stocking Stuffers
  10. Gift Packages
Brakes
  1. Brake Overhaul Packages
  2. Brake Pads
  3. Brake Pad Sensors
  4. Brake Rotors
  5. StopTech Big Brake Kits
  6. Stainless Steel Brake Lines
  7. Brake Fluid
  8. Brake Calipers
  9. Caliper Rebuild Kits
  10. Parking Brake Parts
  11. Brake Cooling Ducts & Backing Plates
  12. Brake Pads - Brembo GT BBK Calipers
  13. Brake Pads - StopTech BBK Calipers
Car Care & Accessories
  1. Car Covers
  2. Wheel & Tire Cleaning
  3. Wax, Polish and Cleaning Supplies
  4. Detailing Gear
  5. Leather & Plastic Care
  6. Car Cleaning Supplies
  7. Chassis Paint, Coatings, Sealants, and Rust Conversion
Drivetrain
  1. Differential and Gearing Upgrades
  2. Differential Mounts and Upgrades
  3. OEM Clutch Kits & Clutch Parts
  4. Performance Clutch Kits & Parts
  5. Stock OEM Dual Mass Flywheels
  6. Clutch Parts
  7. UUC Short Shift Kits
  8. Axle Shafts
  9. Driveshafts
  10. Performance Short Shift Kits
  11. Drivershaft Center Support Bearings
  12. Flex Discs & Guibos
  13. Transmission Parts
Engine Chips
  1. Performance Flash Software, 2005+ Models
  2. Sprint Booster Drive-by-Wire Module
Engine Parts
  1. Engine Performance Packages
  2. Water Pumps
  3. Thermostats
  4. Radiators & Cooling System Overhaul Kits
  5. Radiator Hoses, Cooling Hoses, & Hose Sets
  6. External Engine Parts
  7. Drive Belts & V-Belts
  8. Gaskets, Gasket Sets, Seals, & O-Rings
  9. Factory-Spec Replacement Turbos and Kits
  10. Crankcase Vent, PCV, and Oil Separator Systems
  11. Turbo Upgrades and Kits
  12. Electrical Sensors, Switches, & Relays
  13. Ignition Parts
  14. Alternator & Alternator Parts
  15. Starter Motors & Starter Parts
  16. Fuel System Parts
  17. Internal Engine Parts
  18. Cylinder Head Parts & Head Bolts
  19. VANOS Units & Parts
  20. Oil Coolers & Oil Cooler Parts
Exhaust
  1. Supersprint Performance Exhaust Systems
  2. Performance Headers & Downpipes
  3. Turner Motorsport Performance Exhaust
  4. Akrapovic Performance Exhaust Systems
  5. Borla Performance Exhaust Systems
  6. Corsa Performance Exhaust Systems
  7. Dinan Free Flow Exhaust Systems
  8. Performance Exhaust Systems
  9. Exhaust System Upgrades
  10. Exhaust Muffler Tips
  11. Oxygen Sensor - O2 Sensors
  12. Exhaust Gaskets Hangers and Parts
Exterior / Body
  1. Black Grills
  2. Emblems & Decals for Hood, Trunk, and Wheels
  3. Painted Reflectors
  4. Front Spoilers, Bumper Covers, & Air Dams
  5. Rear Spoilers, Rear Wings, & Aprons
  6. Body Trim Parts & Accessories
  7. Carbon Fiber Trunk Lids
  8. License Plate Brackets & License Plate Frames
  9. Mirror Kits & Mirror Parts
  10. Wiper Blades, Wiper Pumps, & Wiper Motor Parts
  11. Hood Pins and AeroCatch Latches
  12. Racing Tow Hooks and Tow Straps
  13. Aero & Body Kits
Intake
  1. aFe Cold-Air Intake Kits
  2. Dinan Cold Air Intake Kits
  3. Gruppe M Cold-Air Intake Kits
  4. Performance Intake Kits
  5. aFe Performance Air Filters
  6. K&N Performance Air Filters
  7. Intake Cleaning & Recharging Kits
  8. Intake Manifold Components (DISA, Vacuum, CCV, Etc)
  9. BOV, Chargepipe, and Intercooler Upgrade Kits
  10. Mass Air Sensor & Air Flow Meters
  11. Throttle Body Parts
  12. Other Intake Kits
Interior
  1. Floor Mats
  2. Gauge Kits and Data Acquisition
  3. Auxiliary Input Adaptors for BMW
  4. Pedal Sets
  5. Escort Radar Detectors
  6. Factory Steering Wheels
  7. Racing Steering Wheels
  8. Shift Knobs, Shift Boots, & Shift Handles
  9. Seats & Seat Accessories
  10. Seat Belts and Racing Harnesses
  11. Cup Holders and Storage
  12. Carbon Fiber Interior Parts
  13. Door Sill Strips
  14. Interior Switches and Switchgear
  15. Sunshades & Windscreens
  16. Interior Trim & Accessories
Lighting
  1. Bulbs for Headlights, Turn Signals and Tail Lights
  2. Stealth Bulbs
Maintenance
  1. Routine Maintenance & Tune-Up Packages
  2. Oil Filters & Oil Filter Kits
  3. Air Filters
  4. Cabin Air Filters, Heppa Filters, & Microfilters
  5. Transmission Filter Kits & Transmission Service Parts
  6. Ignition Coils
  7. Spark Plugs
  8. Bentley Repair / Service Manuals
  9. Service Reset Tools & Fault Code Readers
  10. Anti-Freeze and Coolant
  11. Engine Oils - Genuine BMW and OEM
  12. Power Steering and Hydraulic Fluids
  13. Transmission and Gear Oil - Genuine BMW and OEM
  14. MOTUL Engine Oil and Gear Lubricants
  15. Red Line Oil & Fluids
  16. Liqui-Moly Oil and Additives
Suspension
  1. Shocks & Struts
  2. H&R Performance Springs
  3. Dinan Performance Springs
  4. Spring & Shock Packages
  5. Bilstein PSS PSS9 PSS10 Coil Over Suspensions
  6. H&R Coil Over Suspensions
  7. KW Coil Over Suspensions
  8. Turner Motorsport Racing Suspension Kits
  9. Sway Bar Kits
  10. Sway Bar Links & Sway Bar Parts
  11. Camber / Caster Kits
  12. Strut Braces & Stress Bars
  13. Control Arm Replacements & Upgrades
  14. Suspension Bushings & Mounts
  15. Wheel Bearings & Hub Assemblies
  16. Steering Racks & Power Steering Pumps
  17. Tie Rods & Steering Parts
  18. Coil Over Spring Hardware
  19. CATuned Coilover Kits
  20. Sachs Performance Coil Over Suspension
Wheels
  1. Apex Flow Formed Alloy Wheels
  2. Forgeline Custom Forged Alloy Wheels
  3. HRE FlowForm Performance Alloy Wheels
  4. Vorsteiner Wheels
  5. Rohana Wheels
  6. D Force Flow Formed Alloy Wheels
  7. Dinan Performance Wheels
  8. Alpina Alloy Wheels
  9. Original BMW Wheels and Wheel Upgrades
  10. Turner Motorsport Wheel Spacers
  11. ECS Tuning Wheel Spacers
  12. H&R Wheel Spacers
  13. Wheel Bolts, Wheel Studs and Nuts
  14. Wheel Emblems, Caps, and Accessories
  15. High Performance Wheels
Tools
  1. Alignment Tools
  2. Battery Chargers and Tenders
  3. Brake Tools
  4. Coil Over Wrenches
  5. Cooling System Tools
  6. Cylinder Head and VANOS Tools
  7. Exhaust Tools
  8. Fan and Fan Clutch Tools
  9. Fault Code Readers and OBD Scan Tools
  10. Fuel System Tools
  11. Genuine BMW Tool Kits
  12. Oil Service Tools
  13. Sockets
  14. Spark Plug Sockets
  15. Transmission and Differential Tools
  16. Wheel Pin Tools
  17. Workshop Chemicals
Clearance
Choose BMW
BMW 1 Series
  1. (E82) 1-series Coupe 2008+
  2. (E88) 1-series Convertible 2008+
BMW 2 Series
  1. (F22) 2-Series Coupe 2014+
  2. (F23) 2-Series Convertible 2014+
  3. (F87) M2 2016+
BMW 3 Series
  1. (E21) 3-Series 1977-1983
  2. (E30) 3-series 1984-1991
  3. (E30) M3 1988-1991
  4. (E36) 3-series 1992-1999
  5. (E36) M3 1995-1999
  6. (E46) 3-Series 1999-2005
  7. (E46) M3 2001-2006
  8. (E90) 3-Series Sedan 2006-2011
  9. (E90) M3 Sedan 2008-2013
  10. (E91) 3-Series Touring 2006-2013
  11. (E92) 3-Series Coupe 2007-2013
  12. (E92) M3 Coupe 2008-2013
  13. (E93) 3-Series Convertible 2007-2013
  14. (E93) M3 Convertible 2008-2013
  15. (F30) 3-Series Sedan 2012+
  16. (F31) 3-Series Touring 2014+
  17. (F80) M3 2015+
  18. (F34) 3-Series Gran Turismo 2014+
BMW 4 Series
  1. (F32) 4-Series Coupe 2014+
  2. (F33) 4-Series Convertible 2015+
  3. (F34) 4-Series Gran Turismo 2014+
  4. (F82) M4 Coupe 2015+
  5. (F83) M4 Convertible 2015+
  6. (F36) 4-Series Gran Coupe 2015+
BMW 5 Series
  1. (E34) M5 1991-1993
  2. (E39) M5 2000-2003
  3. (E60) M5 2006-2010
  4. (E28) 5-Series 1982-1988
  5. (E34) 5-Series 1989-1995
  6. (E39) 5-Series 1996-2003
  7. (E60) 5-Series Sedan 2004-2010
  8. (E61) 5-Series Touring 2006-2010
  9. (F10) 5-Series 2011+
  10. (G30) 5-Series 2017+
BMW 6 Series
  1. (E24) 6-Series 1977-1989
  2. (E63) 6-Series Coupe 2004-2010
  3. (E64) 6-Series Convertible 2004-2010
  4. (F06) 6-Series Gran Coupe 2013+
  5. (F12) 6-Series Coupe 2011+
  6. (F13) 6-Series Convertible 2011+
BMW 7 Series
  1. (E32) 7-Series 1988-1994
  2. (E38) 7-Series 1995-2001
  3. (E65) 7-Series SWB 2002-2007
  4. (E66) 7-Series LWB 2002-2007
  5. (F01) 7-Series SWB 2009+
  6. (F02) 7-Series LWB 2009+
BMW 8 Series BMW Classics (E9, Bavaria, Isetta, etc)
  1. 2500
  2. 2800
  3. 3.0Si
  4. Bavaria
  5. 2800CS
  6. 3.0CS
  7. 2002
  8. 2002tii
  9. (E12) 528i 1977-1981
  10. (E12) 530i 1975-1978
BMW X Series (SAV)
  1. (E84) X1 Series 2013+
  2. (E83) X3 2004-2010
  3. (F25) X3 2011+
  4. (F26) X4 2015+
  5. (E53) X5 2000-2006
  6. (E70) X5 2007-2013
  7. (F15) X5 2014+
  8. (F85) X5 M 2015+
  9. (E71) X6 2008+
  10. (F16) X6 2015+
  11. (F86) X6 M 2015+
  12. (F48) X1 2016+
  13. (F48) X1 (2016+)
BMW Z Series
  1. (E36/7) Z3 1997-2002
  2. (E85) Z4 M Roadster
  3. (E85/E86/E89) Z4 2003+
  4. (E86) Z4 M Coupe
  5. (E52) Z8 2000-2003
BMW 1600-2002 / tii BMW i Series
  1. (I01) BMW i3 2014+
  2. (I12) BMW i8 2014+
MINI Cooper and Cooper S
Racing
Racing Home Racing News Racing Schedule Racing Photo Gallery
Gallery
Photo Gallery Wallpaper Project Cars
  1. Project i8
  2. Project F80 M3
  3. Turner F82 M4
  4. Turner X5 M
  5. Turner F22 2 Series
  6. Turner F13 M6
  7. Turner F10 M5
  8. Turner F30 335i
  9. Turner E9X M3
  10. Turner E92 335i
  11. Turner E82 1 Series
  12. Turner ActiveE (100% Electric)
  13. Turner E46 M3
  14. Turner E46 330i ZHP
  15. Turner E36 M3
  16. Turner E30 M3
  17. Turner MINI Cooper S
  18. McLaren F1
  19. Turner E92 M3 Lime Rock
  20. Turner F80 M3 Silverstone
Video Gallery
Projects
Turner BMW i8 Turner BMW F80 M3 Turner BMW F82 M4 Turner BMW X5 M Turner BMW F22 2 Series Turner BMW F13 M6 Turner BMW F10 M5 Turner BMW F30 335i Turner BMW E9X M3 Turner BMW E92 335i Turner BMW E82 1 Series Turner BMW ActiveE (100% Electric) Turner BMW E46 M3 Turner BMW E46 330i ZHP Turner BMW E36 M3 Turner BMW E30 M3 Turner MINI Cooper S McLaren F1 Turner BMW E92 M3 Lime Rock Turner BMW F80 M3 Silverstone
About Us
About Turner Motorsport Customer Feedback The Turner Team
  1. Open Positions
Returns Policy Shipping Info Contact Us Privacy Policy Security Policy FAQs

BMW F30 Performance Exhaust Systems

BMW F30 Performance Exhaust Systems BMW Performance exhaust systems are tuned by in-house BMW engineers to subtly enhance the sound and performance of your BMW. They have engineered these systems to fit perfectly, sound beautiful, utilize advanced materials, and blend with the styling of your car. BMW Performance exhausts are not too loud - focusing on enhancing the sound rather than blaring it. By opening up the exhaust and removing restrictions, the engine can work less to move the exhaust gasses through the system. This means a bit more power in addition to that sexy growl they produce.
You're currently viewing parts for your (F30) 3-Series Sedan 2012+. Reset your chassis
For accurate results, specify your model below.
AC Schnitzer Sport Rear Silencer - Stainless - F30 F32 F36 435

The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

This item fits the following BMWs: 
2012+ F30 BMW 335i, 335i xDrive

2014+ F32 BMW 435i, 435i xDrive

2014+ F36 BMW 435i, 435i xDrive

Part #: 1812230347
Price: $2495.00 (USD) 
Quantity:   
AC Schnitzer Rear Silencer - F30 F32 340 440

The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

This item fits the following BMWs: 
2016+ F30 BMW 340i 340i xDrive 
2016+ F32 BMW 440i 440i xDrive
 

Part #: 1812230438
Price: $2495.00 (USD) 
Quantity:   
Part #: 1812230348
Price: $2495.00 (USD) 
Quantity:   
AFE Mach Force-Xp Axle-Back Exhaust w/ Gloss Black Tips - F30 340i, F36 440i Gran Coupe

High flow exhaust system directly from aFe, one of the top after market performance manufacturers. This new MACH Force XP Axle-back exhaust system is for the 2016+ BMW 340i F30 and F36 440i Gran Coupe with the new N58 3.0L turbo engine. This exhaust system is constructed from 3.0” mandrel bent stainless steel and is hand TIG-welded. The system uses a high flow transverse muffler with 3" diameter tubing which improves performance across the power band while maintaining a great tone. To finish off this exhaust are dual double wall resonated angle cut gloss black 304 stainless steel tips. The factory actuator drive is retained with the aFe exhaust so that a check engine light does not occur. This exhaust uses all factory hanger locations for a hassle free installation. No modifications necessary.

Simple Installation:
All systems use factory mounting locations providing stability and hassle-free installation.

Leak-Free Seal:
High quality band clamps are used for a complete 360 degree sealing surface.

Aggressive Sound:
A free-flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

Product Features:

  • Constructed from 100% hand TIG-welded, 3" to 2-1/2" mandrel bent, brushed finished 304 stainless steel tubing
  • Includes a factory style exhaust valve
  • Utilizes a unique high flow, transverse muffler with a high-temp powder-coated black finish
  • Includes quad 4" diameter, gloss black, 304 stainless steel tips
  • Uses all factory hanger locations for a hassle-free installation

Fits the Following BMW's:
2016+ F30 BMW 340i B58
2017 F36 BMW 440i B58

Part #: 49-36335-B
Price: $1399.00 (USD) 
Free Shipping Free Shipping
Quantity:   
AC Schnitzer Racing Rear Silencer - F3X 340 440

The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

This item fits the following BMWs: 
2016+ F30 BMW 340i, 340i xDrive 
2016+ F32 F36 BMW 440i, 440i xDrive - Coupe and Gran Coupe

Part #: 1812230436
Price: $2495.00 (USD) 
Quantity:   
Part #: 48-46303KT
Price: $509.00 (USD) 
Free Shipping Free Shipping
Quantity:   
AC Schnitzer Sport Rear Silencer - Stainless - F3X 340 440

The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

This item fits the following BMWs: 
2016+ F30 BMW 340i, 340i xDrive 
2016+ F32 BMW 440i, 440i xDrive

2016+ F36 BMW 440i, 440i xDrive

Part #: 1812230437
Price: $2495.00 (USD) 
Quantity:   
AC Schnitzer Rear Silencer - F30 320

The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

This item fits the following BMWs: 
2012+ F30 BMW 320i, 320i xDrive

Part #: 1812230121
Price: $1895.00 (USD) 
Quantity:   
AFE Exhaust - Axle-Back - F30 335i with Black Tips

Features:

  • In house testing produced a max gain of +4 horsepower and +5 ft. lbs. of torque verified by our in house dyno
  • Constructed from 100% Hand TIG-welded, brushed finish, mandrel-bent, 304 stainless steel
  • Utilizes 2-1/2" tubing tubing for maximum flow
  • Includes dual aFe laser etched, 3.5" gloss black 304 stainless steel tips
  • Dual free-flowing transverse mufflers are used to absorb high pitch tones producing a powerful sound
  • Aggressive sound when shifting with NO DRONE!

    Introducing the new aFe Power MACH Force XP Axle-back exhaust system for the 12-15 BMW 335i F30 with the N55 turbo engine. In recent testing, this system produced +4 horsepower and +5 lbs. x ft. of torque. The system was designed and engineered with the perfect tube diameter and lengths, ultimately maximizing performance across the power band while maintaining a great tone with an aggressive sound during shifting. Countless hours of R&D was used to ensure the perfect decibel level without compromising performance with NO DRONE! To finish off this exhaust are dual, aFe laser etched, 3.5" gloss black 304 stainless steel tips. This exhaust uses all factory hanger locations. 

    True Mitered Merge Collector:
    Eliminates dead space that can cause turbulence and hinder flow that formed collectors are prone to produce.

    Aggressive Sound:
    This system includes dual free-flowing transverse mufflers to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

    304 Stainless Steel Tubing:
    High grade stainless tubing with a uniform brushed finish provides a beautiful look and high resistance to corrosion.

    Mandrel Bent Tubing: 
    This performance exhaust is constructed of 2-1/2" mandrel bent, 304 stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower and torque.

    Simple Installation:
    All systems use factory mounting locations providing stability and hassle-free installation.

    Leak-Free Seal:
    High quality band clamps are used for a complete 360 degree sealing surface.

    Also Fits: BMW 435i/ix (F32/33) 13-15 L6-3.0L (t)

    Note: Does not use OEM exhaust valve.

    All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.
Part #: 49-36325-B
Price: $1399.00 (USD) 
Quantity:   
BMW M Performance Exhaust - F30 328i 2012+, F32 428i This is a factory BMW M Performance exhaust for the 2012+ F30 328i Sedan with N20 4 cylinder turbo engine. This is a factory BMW accessory so it fits great, looks and sounds phenomenal, and is exceptional quality. The sound is mildly more aggressive than the stock exhaust with a slightly more throaty note. This exhaust will waken up the stock 328i personality with a better sound and improved flow. If you feel the stock exhaust is just TOO quiet this is a great option without going overboard. A unique high-tech look is provided by two chrome-plated 80mm exhaust tips which are laser engraved with the ///M logo.This exhaust system includes the rear muffler and exhaust tips. A BMW factory exhaust clamp is included to mount to the factory cat section.

This item fits the following BMWs:
2012+ F30 BMW 328i 328xi - Sedan
2013+ F31 BMW 328i xDrive - Wagon
2013+ F32 BMW 428i 428i xDrive - Coupe
Part #: 18302293771
Price: $1350.85 (USD) 
Free Shipping Free Shipping
AC Schnitzer Racing Evo Silencer System - F3x 340 440

The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

This item fits the following BMWs: 
2016+ F30 BMW 340i 340i xDrive 
2016+ F32 BMW 440i 440i xDrive

Part #: 1812230448
Price: $2095.00 (USD) 
Quantity:   
AC Schnitzer Racing Rear Silencer - F3X 335 435

The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included..

This item fits the following BMWs: 
2014+ F30 BMW 335i 335i xDrive
2014+ F32 F36 BMW 435i 435i xDrive - Coupe and Gran Coupe

Part #: 1812230346
Price: $2495.00 (USD) 
Quantity:   
AFE Exhaust - Cat-Back - F30 335i with Polished Tips

Features:

  • In house testing produced a max gain of +4 horsepower and +5 ft. lbs. of torque verified by our in house dyno
  • Constructed from 100% Hand TIG-welded, brushed finish, mandrel-bent, 304 stainless steel
  • Utilizes 3" tubing which merges into 2-1/2" tubing for maximum flow
  • Includes dual aFe laser etched, 3.5" polished 304 stainless steel tips
  • Dual free-flowing transverse mufflers are used to absorb high pitch tones producing a powerful sound
  • Aggressive sound when shifting with NO DRONE!

    Introducing the new aFe Power MACH Force XP cat-back exhaust system for the 12-14 BMW 335i F30 with the N55 turbo engine. In recent testing, this system produced +4 horsepower and +5 lbs. x ft. of torque. The system was designed and engineered with the perfect tube diameter and lengths, ultimately maximizing performance across the power band while maintaining a great tone with an aggressive sound during shifting. Countless hours of R&D was used to ensure the perfect decibel level without compromising performance with NO DRONE! To finish off this exhaust are dual, aFe laser etched, 3.5" polished 304 stainless steel tips. This exhaust uses all factory hanger locations. 

    True Mitered Merge Collector:
    Eliminates dead space that can cause turbulence and hinder flow that formed collectors are prone to produce.

    Aggressive Sound:
    This system includes dual free-flowing transverse mufflers to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

    304 Stainless Steel Tubing:
    High grade stainless tubing with a uniform brushed finish provides a beautiful look and high resistance to corrosion.

    Mandrel Bent Tubing: 
    This performance exhaust is constructed of 3" merging into 2-1/2" mandrel bent, 304 stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower and torque.

    Simple Installation:
    All systems use factory mounting locations providing stability and hassle-free installation.

    Leak-Free Seal:
    High quality band clamps are used for a complete 360 degree sealing surface.

    Also Fits: BMW 435i/ix (F32/33) 13-15 L6-3.0L (t)

    Note: Does not use OEM exhaust valve.

    All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.
Part #: 49-36326-P
Price: $1499.00 (USD) 
Quantity:   
Awron Exhaust Valve Control Module

AWRON EVC - Exhaust Valve Control Module is a complete plug-n-play controller designed for BMW's with Exhaust Flap Valves. It allows you to remotely open and close the vacuum operated exhaust valve. Close the valves for quiet operation (including cold starts) or open them up for maximum performance sound at the touch of a button. Noise reduction is approximately 8 decibels. Instantaneous response, no need to wait 2+ seconds for the valves to open or close!

This module allows control of the exhaust sound when optimum performance is not required. When the valve is closed, the exhaust is quiet. When fully opened, the exhaust system is in maximum flow mode and the sound of your exhaust is louder. Many BMW owners want a more performance oriented sound without being annoying from their exhaust. After the 30 minute installation, EVC allows the owner to open and close the valve. Compatible with all exhaust systems (OEM or aftermarket) that retain the factory exhaust valve system.

The ECV is installed right after the catalytic converter, and adjustment of the valve is done through a cable run from the cockpit to the valve body. The AWRON valve controlled exhaust gives the user the ability to control the performance and sound of the exhaust with the push of a steering wheel button. This very high quality, stainless steel module is like fitting to OEM component to your vehicle. All necessary hardware included.

Features

  • Full control over Exhaust Valve Control at the touch of a steering wheel button
  • Open / Close Exhaust Valve at any time and instantly
  • Quiet cold starting. Flaps can be opened on cold start (not possible with OEM / M-Menu)
  • Check Engine Light indicator removal for those running cat-less downpipes
  • Easy 30 minute installation process with no wire cutting
  • Instantaneous response, no need to wait 2+ seconds for the valves to open or close!
  • Operated visa steering wheel cruise control rocker switch for fast convenient operation.
  • Completely removable at any time

Operation
The EVC module is operated by the cruise control rocker switch on the steering wheel. If the cruise control is switched off, you can switch back and forth. This allows for easy handling and ensures the control of the vehicle by the driver. To open the flap, push button up, to close push button down. AUTO = the original Integrated safety feature (flap opens on click down or high RPMs or high engine temperature) stays active and is not influenced / overwritten by our system (Independent of which setting you have chosen). OPEN = flaps are opened by using of original and already existing button in your vehicle. The M1 button (at the steering wheel) - Independent of the M1 Configuration CLOSE = flaps are closed and means that flap stay always closed under 4000 RPM. Over 4000 RPM gauge AWRON transferred control over ECU (OEM controlling).

Plug & Play Solution
The module is supplied with all connectors and parts you need. Installation time: 30 minutes. Only 5 cables and one plug have to be connected (no soldering / cutting).

Passive / Invisible mode
Auto passive mode will allow factory electronic test equipment or other aftermarket devices to be utilized without causing irregularities in readouts or operation.

USB port for easy setup / updates
Modules can be configured and updated using via PC

Models Supported:
F1x 5-Series with electronic valve control
F2x 1-Series and 2-Series with electronic valve control
F3x 3-Series and 4 Series with electronic valve control
F8x 3-Series New M3 / M4 (all models)

Part #: AW60000
Price: $475.96 (USD) 
$699.95
Limited Qty Sale
Free Shipping Free Shipping
Quantity:   
AC Schnitzer Rear Silencer - F30 F32 335 435

The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

This item fits the following BMWs: 
2012+ F30 BMW 335i, 335i xDrive

2014+ F32 BMW 435i, 435i xDrive

Part #: 1812230338
Price: $2495.00 (USD) 
Quantity:   
ACtive Autowerke Signature Exhaust Muffler Generation 2 - F3X 335i/xi 435i/xi 2013+

This system is constructed from 100% Brushed 304-stainless steel and features adjustable Active Autowerke double walled tips, making it ideal both for 2-door and 4-door models.

Rather than creating a complete exhaust system, Active Autowerke opted for a compact design built in a smaller package to deliver more value to the BMW end user. 

Just like replacing the BMW factory rear exhaust, the Active Autowerke BMW Performance rear exhaust does it in much the same way, if not better by using a much beefier, heavy duty TORCA style exhaust clamp. TORCA clamps are known for their strength and sealing capabilities to make that tight seal.

Other cool features like height adjustable mounting tabs also help to make this exhaust very east to install.

The system is a straight-through design providing substantial improvements to gas flow over the factory exhaust. Gone is the factory flapper to change exhaust tones; this BMW Performance exhaust doesn't need gimmicks to accomplish baritones or suffer from problems like sticking flappers that will happen due to exhaust build up. Instead, the sound come out non intrusive, with a rich mellow tone and delivers a solid 15+hp, with key gains in the mid-range.

FEATURES:

  • Large mandrel bent piping for maximum flow
  • Durable, Brushed 100% 304 stainless steel for durability 
  • Double-walled Signature Brushed stainless tips
  • Adjustable Tips with Embossed Active Autowerke Logo
  • Improved power & torque throughout entire RPM band
  • Gains of 12-15 HP over stock configuration
  • Tight seal with use of TORCA style exhaust clamps
  • Height adjustable mounting brackets make installation easy  
  • Factory curb weight 27.0 Lbs, Active 435i weighs 22.0 Lbs 
  • Fitment for Coupe, Convertible and Sedans
  • Complete illustrated instruction manual 
  • Two year warranty

Fits the Following Vehicles:
2013+ BMW F30 335i, xi
2013+ BMW F32 435i, xi  
2013+ BMW F33 435i, xi 
2013+ BMW F36 435i

Part #: 11-027
Price: $849.00 (USD) 
Quantity:   
AC Schnitzer Sport Rear Silencer - Black - F30 340

The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

This item fits the following BMWs: 
2016+ F30 BMW 340i, 340i xDrive

Part #: 18122304479
Price: $2195.00 (USD) 
Quantity:   
AC Schnitzer Sport Rear Silencer - Black - F30 F32 F36 335 435

The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

This item fits the following BMWs: 
2012+ F30 BMW 335i, 335i xDrive

2014+ F32 BMW 435i, 435i xDrive

2014+ F36 BMW 435i, 435i xDrive

Part #: 18122303379
Price: $2495.00 (USD) 
Quantity:   
AFE Exhaust - Cat-Back - F30 328i 2012-2014 N20 with Black Tips This new MACH Force XP exhaust system is for the 2012 to 2015 BMW 328i F30 with the new N20 2.0L turbo engine. In recent testing this system produced 12 horsepower and 17 lbs. x ft. of torque. This exhaust system is constructed from 3.0” mandrel bent stainless steel and is MIG-welded. The system uses a high flow 18" transverse muffler with 3" diameter tubing which improves performance across the power band while maintaining a great tone. To finish off this exhaust are dual double wall resonated angle cut gloss black 304 stainless steel tips. The factory actuator drive is retained with the aFe exhaust so that a check engine light does not occur. This exhaust uses all factory hanger locations for a hassle free installation. No modifications necessary.  Note: Does not fit vehicle with N26 engine. N26 engine is SULEV (super low emission) version of N20

All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

Simple Installation:
All systems use factory mounting locations providing stability and hassle-free installation.

Leak-Free Seal:
High quality band clamps are used for a complete 360 degree sealing surface.

Aggressive Sound:
A free-flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.
Part #: 49-46310-B
Price: $1299.00 (USD) 
Quantity:   
AC Schnitzer Sport Rear Silencer - Stainless - F30 340

The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

This item fits the following BMWs: 
2014+ F30 BMW 340i, 340i xDrive

Part #: 1812230447
Price: $2095.00 (USD) 
Quantity:   
AC Schnitzer Sport Rear Silencer - Stainless - F30 320

The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

This item fits the following BMWs: 
2014+ F30 BMW 320i, 320i xDrive

Part #: 1812230122
Price: $1895.00 (USD) 
Quantity:   
AC Schnitzer Sport Rear Silencer - Black - F30 320

The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

This item fits the following BMWs: 
2012 F30 BMW 320i, 320i xDrive

Part #: 18122301229
Price: $1995.00 (USD) 
Quantity:   
AFE Exhaust - Axle-Back - F30 335i with Polished Tips

Features:

  • In house testing produced a max gain of +4 horsepower and +5 ft. lbs. of torque verified by our in house dyno
  • Constructed from 100% Hand TIG-welded, brushed finish, mandrel-bent, 304 stainless steel
  • Utilizes 3" tubing which merges into 2-1/2" tubing for maximum flow
  • Includes dual aFe laser etched, 3.5" polished 304 stainless steel tips
  • Dual free-flowing transverse mufflers are used to absorb high pitch tones producing a powerful sound
  • Aggressive sound when shifting with NO DRONE!

    Introducing the new aFe Power MACH Force XP cat-back exhaust system for the 12-14 BMW 335i F30 with the N55 turbo engine. In recent testing, this system produced +4 horsepower and +5 lbs. x ft. of torque. The system was designed and engineered with the perfect tube diameter and lengths, ultimately maximizing performance across the power band while maintaining a great tone with an aggressive sound during shifting. Countless hours of R&D was used to ensure the perfect decibel level without compromising performance with NO DRONE! The exhaust is constructed from 3" TIG-welded, brushed finish, mandrel-bent, 304 stainless steel. To finish off this exhaust are dual, aFe laser etched, 3.5" polished 304 stainless steel tips. This exhaust uses all factory hanger locations. 

    True Mitered Merge Collector
    Eliminates dead space that can cause turbulence and hinder flow that formed collectors are prone to produce.

    Aggressive Sound:
    This system includes dual free-flowing transverse mufflers to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque while eliminating drone.

    304 Stainless Steel Tubing:
    High grade stainless tubing with a uniform brushed finish provides a beautiful look and high resistance to corrosion.

    Mandrel Bent Tubing: 
    This performance exhaust is constructed of 3" merging into 2-1/2" mandrel bent, 304 stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower and torque.

    Simple Installation:
    All systems use factory mounting locations providing stability and hassle-free installation.

    Leak-Free Seal:
    High quality band clamps are used for a complete 360 degree sealing surface.

    Also Fits: BMW 435i/ix (F32/33) 13-15 L6-3.0L (t)

    Note: Does not use OEM exhaust valve.

    All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.
Part #: 49-36325-P
Price: $1299.00 (USD) 
Quantity:   
AFE Twisted Steel Racing Downpipe - F30 335i

aFe is proud to introduce the aFe Twisted Steel® non-catalytic down-pipe for the 2012-2013 BMW F30 335i with the L6-3.0L (N55) engine. In testing this system resulted in a max gain of 13 horsepower and 27 lbs. x ft. of torque and outflowed the restricted OE catalytic converter by up to 190%. This high performance race pipe delivers pure, race-inspired raw power and also produces an aggressive and exciting exhaust sound during hard throttle. aFe also used a massive, light-weight 4" diameter 304 stainless steel tube and progressively tapers to increase exhaust velocity and usable torque.

Tig-Welded: 
100% TIG-Welded by certified craftsmen for race proven strength and durability. TIG-Welding provides the strongest welds reducing stress cracks.

Tapered Design: 
A unique 4" Dia. 304 stainless steel taper design is used to increase exhaust velocity and increase usable torque. This means more aggressive throttle response and increased passing power.

Factory O2 Sensor Locations: 
Factory mounting locations for all O2 sensors.

Hassle-Free Installation: 
OE style brackets are included for a hassle-free installation. This unit also comes with a lifetime warranty.

aFe down pipes are engineered and manufactured in our Corona, California manufacturing facility.

Note: This is a "Race Only" product used solely for competition. Its use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization. Any other use including recreational off-road use could be in violation of local, state and federal laws. A check engine light will emit and aFe recommends using a programmer but it is not necessary.

This part alters or deletes the emissions equipment on your car, and may not meet emissions standards in all states. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.

Part #: 48-36311KT
Price: $499.00 (USD) 
Quantity:   
Innotech Valvetronic exhaust system - F30 328i

For car enthusiasts, one of the key aspects to your car is the sound. That being said, in can be very difficult to find the right exhaust that gives you the right note. Sometimes too loud, other times too quiet and just not always what you want. Now, you no longer have to choose between loud or quiet thanks to Innotech Performance (iPE). They have created and exhaust system that gives you the perfect blend of performance and sound while giving you control at your fingertips. 

Innotech takes pride in becoming an industry leader in the high performance exhaust community. They've reached this feet by specializing in valvetronic exhaust systems. What is valvetronic? Valvetronic is the term for valve-controlled exhaust technology that delivers power and control to the driver’s seat. Operated by a remote control, these systems have 3 different settings: on, off, auto. With the system set to on, the valves are fully open for the best performance and sound. When set to off, the valves close, resulting in significantly reduced sound. The final setting is off, which may be the best option for most. The system detects RPM and fuel pedal signal and adjusts the valve accordingly for the ultimate driving experience. 

Each part of the exhaust system is individually designed to fit it's application perfectly. The unique designs overcome the limits set by the stock exhaust, so that performance, sound, and driving pleasure can be increased dramatically.

Kit Includes:

  • Front pipe
  • Mid-pipe
  • Valvetronic Muffler
  • Dual Polished tips
  • Remote Control Kit
Part #: BM017
Price: $2802.50 (USD) 
$2950.00 (5% off MSRP)
Quantity:   
AC Schnitzer Sport Rear Silencer - Black - F3X 335 435

The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

This item fits the following BMWs: 
2016+ F30 BMW 335i, 335i xDrive 
2016+ F32 F36 BMW 435i, 435i xDrive - Coupe and Gran Coupe

Part #: 18122303479
Price: $2495.00 (USD) 
Quantity:   
AC Schnitzer Racing Rear Silencer - F30 340

The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

This item fits the following BMWs: 
2016+ F30 BMW 340i, 340i xDrive

Part #: 1812230446
Price: $2095.00 (USD) 
Quantity:   
AFE Twisted Steel Downpipe With Cat - F30 335i

aFe is proud to introduce the aFe Twisted Steel® Down-Pipe with a 400 CPSI high-flow catalytic converter for the 2012-2015 BMW F30 335i with the L6-3.0L (N55) engine. In testing this system resulted in a max gain of 10 horsepower and 16 lbs. x ft. of torque and outflowed the restricted OE catalytic converter by up to 150%. This high performance down-pipe delivers the perfect balance of pure, race-inspired performance, in-cabin driving comfort and the excitement of exhaust sound and tone during normal cruising or aggressive hard throttle. aFe also included a massive, lightweight, 4" diameter, 304 stainless steel tube with a 400 CPSI, high-flow catalytic converter. 

Tig-Welded: 
100% TIG-Welded by certified craftsmen for race proven strength and durability. TIG-Welding provides the strongest welds reducing stress cracks.

High-Flow Catalytic Converter: 
This system uses a 48 state legal 400 cell per square inch (CPSI) stainless steel high-flow catalytic converter designed for maximum flow and performance.

Factory O2 Sensor Locations: 
Factory mounting locations for all O2 sensors.

Hassle-Free Installation: 
OE style brackets are included for a hassle-free installation. This unit also comes with a lifetime warranty.

aFe down pipes are engineered and manufactured in our Corona, California manufacturing facility.

Note: This is a "Race Only" product used solely for competition. Its use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization. Any other use including recreational off-road use could be in violation of local, state and federal laws.

This part alters or deletes the emissions equipment on your car, and may not meet emissions standards in all states. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.

Part #: 48-36310KT
Price: $699.00 (USD) 
Quantity:   
AC Schnitzer Racing Rear Silencer - F30 F32 328 428

The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

This item fits the following BMWs: 
2012+ F30 BMW 328i, 328i xDrive

2014+ F32 BMW 428i, 428i xDrive

Part #: 1812230141
Price: $1895.00 (USD) 
Quantity:   
AFE Exhaust - Cat-Back - F30 335i with Black Tips

Features:

  • In house testing produced a max gain of +4 horsepower and +5 ft. lbs. of torque verified by our in house dyno
  • Constructed from 100% Hand TIG-welded, brushed finish, mandrel-bent, 304 stainless steel
  • Utilizes 3" tubing which merges into 2-1/2" tubing for maximum flow
  • Includes dual aFe laser etched, 3.5" gloss black 304 stainless steel tips
  • Dual free-flowing transverse mufflers are used to absorb high pitch tones producing a powerful sound
  • Aggressive sound when shifting with NO DRONE!

    Introducing the new aFe Power MACH Force XP cat-back exhaust system for the 12-14 BMW 335i F30 with the N55 turbo engine. In recent testing, this system produced +4 horsepower and +5 lbs. x ft. of torque. The system was designed and engineered with the perfect tube diameter and lengths, ultimately maximizing performance across the power band while maintaining a great tone with an aggressive sound during shifting. Countless hours of R&D was used to ensure the perfect decibel level without compromising performance with NO DRONE! The exhaust is constructed from 3" TIG-welded, brushed finish, mandrel-bent, 304 stainless steel. To finish off this exhaust are dual, aFe laser etched, 3.5" gloss black 304 stainless steel tips. This exhaust uses all factory hanger locations. 

    True Mitered Merge Collector
    Eliminates dead space that can cause turbulence and hinder flow that formed collectors are prone to produce.

    Aggressive Sound:
    This system includes dual free-flowing transverse mufflers to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque while eliminating drone.

    304 Stainless Steel Tubing:
    High grade stainless tubing with a uniform brushed finish provides a beautiful look and high resistance to corrosion.

    Mandrel Bent Tubing: 
    This performance exhaust is constructed of 3" merging into 2-1/2" mandrel bent, 304 stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower and torque.

    Simple Installation:
    All systems use factory mounting locations providing stability and hassle-free installation.

    Leak-Free Seal:
    High quality band clamps are used for a complete 360 degree sealing surface.

    Also Fits: BMW 435i/ix (F32/33) 13-15 L6-3.0L (t)

    Note: Does not use OEM exhaust valve.

    All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.
Part #: 49-36326-B
Price: $1599.00 (USD) 
Quantity:   
AC Schnitzer Racing Rear Silencer - F3X 335 435

The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

This item fits the following BMWs: 
2016+ F30 BMW 335i, 335i xDrive 
2016+ F32 F36 BMW 435i, 435i xDrive - Coupe and Gran Coupe

Part #: 1812230336
Price: $2495.00 (USD) 
Quantity:   
BMW M Performance Exhaust - F30 335i 335i xDrive - F32 435i 435i xDrive This is a factory BMW M Performance exhaust for the 2013+ F30 335i, 335xi, F32 435i & 435i xDrive Coupe. This is a factory BMW accessory so it fits great, looks and sounds phenomenal, and is exceptional quality. The sound is mildly more aggressive than the stock exhaust with a slightly more throaty note. This exhaust will waken up the stock 435i personality with a better sound and improved flow. If you feel the stock exhaust is just TOO quiet this is a great option without going overboard. A unique high-tech look is provided by two either chrome-plated or Carbon fiber 80mm exhaust tips which are laser engraved with the ///M logo.

This exhaust system includes the rear muffler (18302354340). Please select exhaust tip options below. Chrome - (18302354364) Carbon Fiber (18302355889) . A BMW factory exhaust clamp is included to mount to the factory cat section.

This item fits the following BMWs:
2012+ F30 BMW 335i 335i xDrive - Sedan
2013+ F32 BMW 435i 435i xDrive - Coupe
Part #: 18302354340
Price: $1197.85 (USD) 
Free Shipping Free Shipping
AC Schnitzer Sport Rear Silencer - Stainless - F3X 335 435

The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

This item fits the following BMWs: 
2012+ F30 BMW 335i 335i xDrive 
2014+ F32 BMW 435i 435i xDrive

Part #: 1812230337
Price: $2495.00 (USD) 
Quantity:   
AC Schnitzer Sport Rear Silencer - Stainless - F3X 328 428

The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

This item fits the following BMWs: 
2016+ F30 BMW 328i, 328i xDrive 
2016+ F32 F36 BMW 428i, 428i xDrive - Coupe and Gran Coupe

 

Part #: 1812230142
Price: $1895.00 (USD) 
Quantity:   
AFE Mach Force-Xp Cat-Back Exhaust w/ Gloss Black Tips - F30 340i BMW

High flow exhaust system directly from aFe, one of the top after market performance manufacturers. This new MACH Force XP exhaust system is for the 2016+ BMW 340i F30 with the new N58 3.0L turbo engine. In recent testing this system produced 14 horsepower and 13 lbs. x ft. of torque. This exhaust system is constructed from 3.0” mandrel bent stainless steel and is hand TIG-welded. The system uses a high flow transverse muffler with 3" diameter tubing which improves performance across the power band while maintaining a great tone. To finish off this exhaust are dual double wall resonated angle cut gloss black 304 stainless steel tips. The factory actuator drive is retained with the aFe exhaust so that a check engine light does not occur. This exhaust uses all factory hanger locations for a hassle free installation. No modifications necessary.

Simple Installation:
All systems use factory mounting locations providing stability and hassle-free installation.

Leak-Free Seal:
High quality band clamps are used for a complete 360 degree sealing surface.

Aggressive Sound:
A free-flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

Product Features:

  • +14 HP and +13 lbs. x ft. Torque max gains
  • Constructed from 100% hand TIG-welded, 3" to 2-1/2" mandrel bent, brushed finished 304 stainless steel tubing
  • Includes a factory style exhaust valve
  • Utilizes a unique high flow, transverse muffler with a high-temp powder-coated black finish
  • Includes dual 4" diameter, gloss black 304 stainless steel tips
  • Factory style V-band flange for a secure leak-free seal
  • Uses all factory hanger locations for a hassle-free installation

 

Fits the Following BMW's:
2016+ F30 BMW 340i B58

Part #: 49-36334-B
Price: $1799.00 (USD) 
Quantity:   
AC Schnitzer Sport Rear Silencer - Black - F3X 328 428

The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

This item fits the following BMWs: 
2014+ F30 BMW 328i 328i xDrive
2014+ F32 F36 BMW 428i, 428i xDrive - Coupe and Gran Coupe

Part #: 18122301429
Price: $1995.00 (USD) 
Quantity:   
AFE Mach Force-Xp Cat-Back Exhaust w/ Polished Tips - F30 340i BMW

High flow exhaust system directly from aFe, one of the top after market performance manufacturers. This new MACH Force XP exhaust system is for the 2016+ BMW 340i F30 with the new N58 3.0L turbo engine. In recent testing this system produced 14 horsepower and 13 lbs. x ft. of torque. This exhaust system is constructed from 3.0” mandrel bent stainless steel and is hand TIG-welded. The system uses a high flow transverse muffler with 3" diameter tubing which improves performance across the power band while maintaining a great tone. To finish off this exhaust are dual double wall resonated angle cut polished 304 stainless steel tips. The factory actuator drive is retained with the aFe exhaust so that a check engine light does not occur. This exhaust uses all factory hanger locations for a hassle free installation. No modifications necessary.

Simple Installation:
All systems use factory mounting locations providing stability and hassle-free installation.

Leak-Free Seal:
High quality band clamps are used for a complete 360 degree sealing surface.

Aggressive Sound:
A free-flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

Product Features:

  • +14 HP and +13 lbs. x ft. Torque max gains
  • Constructed from 100% hand TIG-welded, 3" to 2-1/2" mandrel bent, brushed finished 304 stainless steel tubing
  • Includes a factory style exhaust valve
  • Utilizes a unique high flow, transverse muffler with a high-temp powder-coated black finish
  • Includes dual 4" diameter, polished 304 stainless steel tips
  • Factory style V-band flange for a secure leak-free seal
  • Uses all factory hanger locations for a hassle-free installation

 

Fits the Following BMW's:
2016+ F30 BMW 340i B58

Part #: 49-36334-P
Price: $1699.00 (USD) 
Quantity:   
AFE Mach Force-Xp Axle-Back Exhaust w/ Polished Tips - F30 340i, F36 440i Gran Coupe

High flow exhaust system directly from aFe, one of the top after market performance manufacturers. This new MACH Force XP Axle-back exhaust system is for the 2016+ BMW 340i F30 and F36 440i Gran Coupe with the new N58 3.0L turbo engine. This exhaust system is constructed from 3.0” mandrel bent stainless steel and is hand TIG-welded. The system uses a high flow transverse muffler with 3" diameter tubing which improves performance across the power band while maintaining a great tone. To finish off this exhaust are dual double wall resonated angle cut gloss black 304 stainless steel tips. The factory actuator drive is retained with the aFe exhaust so that a check engine light does not occur. This exhaust uses all factory hanger locations for a hassle free installation. No modifications necessary.

Simple Installation:
All systems use factory mounting locations providing stability and hassle-free installation.

Leak-Free Seal:
High quality band clamps are used for a complete 360 degree sealing surface.

Aggressive Sound:
A free-flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

Product Features:

  • Constructed from 100% hand TIG-welded, 3" to 2-1/2" mandrel bent, brushed finished 304 stainless steel tubing
  • Includes a factory style exhaust valve
  • Utilizes a unique high flow, transverse muffler with a high-temp powder-coated black finish
  • Includes quad 4" diameter, gloss black, 304 stainless steel tips
  • Uses all factory hanger locations for a hassle-free installation

Fits the Following BMW's:
2016+ F30 BMW 340i B58
2017 F36 BMW 440i B58

Part #: 49-36335-P
Price: $1299.00 (USD) 
Quantity:   
Active Autowerke Signature Exhaust Muffler Generation 2 - F22/F30 228i 328i

The Active Autowerke BMW F30 328I signature exhaust is located in a class all of its own. This product is a must for any enthusiast searching for true performance, added durability and an attractive weight advantage when it comes to the F30 328I performance signature exhaust.

This system is constructed from 100% polished 304-stainless steel and features adjustable 80 mm double walled tips, making it ideal both for two-door and four-door models (which also allows for cleaner fitment with diffusers).

This BMW F22/F30 exhaust delivers everything we know you would want in a performance exhaust: eye-catching style, a sophisticated yet aggressive tone, weight savings, and – most importantly – measurable horsepower performance gains!

This muffler turns your 328I exhaust tone into a sporty but mellow tone that is not only exhilarating but non obtrusive on your ears.

The factory counterpart weighs 29 lbs. while the Active Autowerke Signature exhaust weighs only a mere 19 lbs. Weight savings are not the only attributes, this 328I performance exhaust has a modular design with its v-band clamps that makes fitment a snap. A revelation in BMW tuning.

On the in-house Active Autowerke Mustang dyno, their otherwise 100% stock 2013 328I test mule spun the rollers to the tune of an extra 9 RWHP, and 13 LB-FT of torque…from “just” a quality muffler upgrade.

Turbos love to exhale, and we are very anxious to continue to unearth just how much extra power is hiding in the stock exhaust system.

FEATURES:

  • Larger diameter mandrel bent piping for maximum flow
  • Durable, polished 100% 304 stainless steel
  • Double-walled 80 mm signature stainless tips
  • Adjustable tips with embossed Active Autowerke logo on the dual tip model
  • Improved power & torque throughout entire RPM band
  • Actual dyno measure results with gains of 10 + WHP over stock configuration
  • Weighs 19 lbs. vs. the factory of 29 lbs.
  • Fitment for coupe, convertible and sedans
  • Complete illustrated instruction manual
  • Two year limited warranty included

NOTE:

  • Exhaust system requires cutting of the factory pipe for installation. Dimensions and cutting measurements are included in the instructions.

 

Fits F22/30 BMW 228i and 328i models with the N20 engine.

Part #: 11-025
Price: $649.00 (USD) 
Quantity:   
AC Schnitzer Sport Rear Silencer - Black - F3X 340 440

The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

This item fits the following BMWs: 
2014+ F30 BMW 340i 340i xDrive
2014+ F32 F36 BMW 440i 440i xDrive - Coupe and Gran Coupe

Part #: 18122304379
Price: $2495.00 (USD) 
Quantity:   
Mach Force XP Cat Back Exhaust System This new MACH Force XP exhaust system is for the 2012 to 2015 BMW 328i F30 with the new N20 2.0L turbo engine. In recent testing this system produced 12 horsepower and 17 lbs. x ft. of torque. This exhaust system is constructed from 3.0” mandrel bent stainless steel and is MIG-welded. The system uses a high flow 18" transverse muffler with 3" diameter tubing which improves performance across the power band while maintaining a great tone. To finish off this exhaust are dual double wall resonated angle cut gloss black 304 stainless steel tips. The factory actuator drive is retained with the aFe exhaust so that a check engine light does not occur. This exhaust uses all factory hanger locations for a hassle free installation. No modifications necessary.  Note: Does not fit vehicle with N26 engine. N26 engine is SULEV (super low emission) version of N20

All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

Simple Installation:
All systems use factory mounting locations providing stability and hassle-free installation.

Leak-Free Seal:
High quality band clamps are used for a complete 360 degree sealing surface.

Aggressive Sound:
A free-flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.
Part #: 49-46310-P
Price: $1199.00 (USD) 
Quantity:   
F3X 335/435 3D Design Sport Muffler - Quad Tip

This sport muffler gives your BMW a pleasant performance exhaust note and is the perfect complement to your new 3D Design rear diffuser. It installs in place of the stock muffler and will not impact vehicle emissions equipment, making it an ideal choice for a daily-driven car where looks & performance are a concern. 

3D Design is focused on high-quality styling components that allow you to personalize the look of your BMW & remain true to the car's original form. Inspired by European tuning trends & Japan's unique VIP tuning style, their wide range of lips, diffusers, side skirts, & spoilers are made from high-quality urethane or super light, super strong prepreg dry carbon and install easily to your factory bumpers & skirts to offer an understated, aggressive performance look.

Part #: 4101-23015
Price: $3950.00 (USD) 
Quantity:   
Innotech Valvetronic exhaust system - F30 335i

For car enthusiasts, one of the key aspects to your car is the sound. That being said, in can be very difficult to find the right exhaust that gives you the right note. Sometimes too loud, other times too quiet and just not always what you want. Now, you no longer have to choose between loud or quiet thanks to Innotech Performance (iPE). They have created and exhaust system that gives you the perfect blend of performance and sound while giving you control at your fingertips. 

Innotech takes pride in becoming an industry leader in the high performance exhaust community. They've reached this feet by specializing in valvetronic exhaust systems. What is valvetronic? Valvetronic is the term for valve-controlled exhaust technology that delivers power and control to the driver’s seat. Operated by a remote control, these systems have 3 different settings: on, off, auto. With the system set to on, the valves are fully open for the best performance and sound. When set to off, the valves close, resulting in significantly reduced sound. The final setting is off, which may be the best option for most. The system detects RPM and fuel pedal signal and adjusts the valve accordingly for the ultimate driving experience. 

Each part of the exhaust system is individually designed to fit it's application perfectly. The unique designs overcome the limits set by the stock exhaust, so that performance, sound, and driving pleasure can be increased dramatically.

Kit Includes:

  • Front pipe
  • Y-pipe
  • Valvetronic Muffler
  • Dual Polished tips
  • Remote Control Kit
Part #: BM019
Price: $3182.50 (USD) 
$3350.00 (5% off MSRP)
Quantity:   
Get notified about money saving
specials & deals for your BMW
enter your email address
  • 22 years of BMW Tuning.
  • Award winning service.
  • 10,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook




    • 1-800-280-6966
      Mon-Thur 9am-6pm ET, Fri 9am-5pm ET

      • © TurnerMotorsport.com 1993-2017. All Rights Reserved.