aFe Cold-Air Intake Kits for BMW 3 Series F34 (2014+)

Clear BMW chassis
If you're like us, then you enjoy taking your vehicle to the track whenever you get a chance. Whether you have a fully built track slayer or if you just enjoy taking your daily driver to autocross events, Turner Motorsport carries what you need to pass tech and, more importantly, keep yourself safe in the event of an accident.

aFe Restore Kit for Pro5R Oiled Filters
AFE - Corporate Logo
T#:1943
Part#: 55-10460
In Stock
$16.10
Free Shipping on orders $99 and up

Bring your aFe filter back to life with a Restore kit from aFe. Included is filter cleaner & replacement oil. These air filter oils is designed to not harm MAF sensors, while allowing the filter to catch as much debris as possible.

Used for Pro 5 R filters

aFe Dynamic Air Scoops (DAS) - F30 320i, 328i 2012+
AFE - Corporate Logo
T#:16591
Part#: 54-12218
In Stock
$46.55
Free Shipping
Direct more fresh cool air from your BMW's center/nose grills to your intake, with the aFe D.A.S. (Dynamic Air Scoops). This "scoop" installs behind your front grills to direct more airflow into the factory intake snorkel used on the 2012 (and newer) F30 328i with N20 turbo engine. The scoop is a direct bolt-in install, and includes installation instructions and required hardware for a simple install. When combined with a higher flowing filter, such as the aFe stock replacement filter these scoops help get the maximum benefit of a higher efficiency filter by providing more cool, fresh outside air directly into the intake snorkel. F30 aFe Intake Scoop Instructions

These aFe Intake Scoops fit the following BMWs:
2012+ F30 BMW 320i, 320i xDrive, 328i 328i xDrive - Sedan
2013+ F31 BMW 328i xDrive - Wagon
aFe Restore Kit for ProDry S Dry Filters
AFE - Corporate Logo
T#:193973
Part#: 90-59999
In Stock
$18.95
Free Shipping
This eco-friendly air filter cleaner is for the aFe Pro Dry S performance air filter. Simply spray on and wash off and your Pro Dry S air filter is good to go. Please follow the instrucctions with the kit and you will have a lifetime of horsepower.

Magnum FORCE Stage-2 Pro 5R Cold Air Intake System - F3X B58
AFE - Corporate Logo
T#:557746
Part#: 54-12912-B
Ships in 10 Business Days
$312.55
$312.55

7" Tall Air Filter:
This intake system utilizes an oil-free, 7" tall conical 360-degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance.

High-Quality Tube:
This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit.

Lightweight Vacuum Form Plastic Cover w/ Auxiliary Air Inlet:
Creates a stealthy under-hood look while reducing air intake noise without sacrificing power. A urethane plug is also included if you wish to block off the auxiliary air inlet.

Hassle-Free Installation:
All clamps, coupling, and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts.

Note 1:
Does NOT fit Convertible models.

Note 2:
This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.

This part fits the following BMWs:
F3X B58


Magnum FORCE Stage-2 Pro 5R Cold Air Intake System - F3X B58
AFE - Corporate Logo
T#:557745
Part#: 54-12912-C
Ships in 10 Business Days
$341.05
$341.05

7" Tall Air Filter:
This intake system utilizes an oil free, 7" tall conical 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance.

High Quality Tube:
This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit.

Carbon Fiber Look Cover w/ Auxiliary Air Inlet:
This carbon fiber look cover is constructed with lightweight vacuumed formed ABS plastic for underhood appearance. A urethane plug is also included if you wish to block off the auxiliary air inlet.

Hassle-Free Installation:
All clamps, coupling and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts.

Note 1:
Does NOT fit Convertible models.

Note 2:
This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.

Momentum GT Cold Air Intake System w/ Carbon Fiber trim F2X,F3X N55
AFE - Corporate Logo
T#:557750
Part#: 52-76311
Ships in 10 Business Days
$616.55
$616.55

Unique One-Piece High-Quality Housing w/ Auxiliary Inlet:
The smooth one-piece high quality sealed housing with auxiliary air inlet is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style. Unique Filter-to-Housing Interface.(US PAT 9440175)

Carbon Fiber Trim On Housing:
This Momentum GT intake system offers carbon fiber trim on housing to give that motorsport appearance. This cover overlay is constructed of lightweight high gloss, clear-coated 2 x 2 twill-weave carbon fiber.

High-Quality Tube:
This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit.

2 Large Performance Air Filters:
This Momentum GT intake system was designed around the largest filters possible. Each kit comes with two large 7-1/2" tall inverted top conical air filters: One constructed in our 5-layer progressive oiled media (Pro 5R) and the other made out of our 3-layer synthetic oil-free media (Pro DRY S).

Premium Hardware:
Premium stainless steel clamp is used for strength while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.

Note:
This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.

This part fits the following BMWs:
F2X 135i N55
F3X 335i N55


aFe Magnum FORCE Stage-2 Pro DRY S Cold Air Intake System - F22 F3X B58 3.0L
AFE - Corporate Logo
T#:557818
Part#: 51-12912-B
Ships in 10 Business Days
$312.55
$312.55

7" Tall "Oil Free" Air Filter:
This intake system utilizes an oil free, 7" tall conical 360 degree radial flow performance air filter with 3-layers of synthetic media providing maximum airflow and performance.

High Quality Tube:
This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit.

Lightweight Vacuum Form Plastic Cover w/ Auxiliary Air Inlet:
Creates a stealthy under-hood look while reducing air intake noise without sacrificing power. A urethane plug is also included if you wish to block off the auxiliary air inlet.

Hassle-Free Installation:
All clamps, coupling and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts.

DETAILS:

  • 400 CFM Rating
  • +9 HP / +10 lbs. x ft. Torque max gains
  • Outflows factory intake
  • CAD-Designed Roto-Molded Intake Tube
  • Vacuum Form Cover for Stealthy Under-Hood Look w/ Auxiliary air Inlet
  • Pro DRY S oil-free 3-Layer Synthetic Media for Maximum Convenience With Excellent Filtration Efficiency
  • No Cutting or Drilling on Factory Parts for Faster Installation

Note 1:
Does NOT fit Convertible models.

Note 2:
This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.

Momentum GT PRO 5R Cold Air Intake System w/ Carbon Fiber Trim - F3X, F8X, F2X N55
AFE - Corporate Logo
T#:557726
Part#: 54-76311
Ships in 10 Business Days
$521.55
$521.55

Unique One-Piece High-Quality Housing w/ Auxiliary Inlet:
The smooth one-piece high quality sealed housing with auxiliary air inlet is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style. Unique Filter-to-Housing Interface. (US PAT 9440175)

Carbon Fiber Trim On Housing:
This Momentum GT intake system offers carbon fiber trim on the housing to give that motorsport appearance. This cover overlay is constructed of lightweight high gloss, clear-coated 2 x 2 twill-weave carbon fiber.

High-Quality Tube:
This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit.

Large 5-Layer Performance Air Filter:
The Momentum GT intake is designed around an oil-free, large 7-1/2" tall inverted top 360-degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. The unique air filter to housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process.

Premium Hardware:
Premium stainless steel clamp is used for strength while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.

Note:
This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.


Select Vehicle

Category

  • aFe Cold-Air Intake Kits

Price

$
$

Special Offers