Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

BMW F34 Chargepipe & BOV Upgrade Kits

BMW F34 Chargepipe & BOV Upgrade Kits The new generation of BMW turbo engines suffer from both heatsoak-induced horsepower losses and boost-related stress and pressure failures. The plastic components can be a problem even at stock boost levels. When modifying the car and increasing boost, installing an upgraded intercooler is essential to keep temperatures down and minimize pressure loss. Another area that also needs attention is the stock chargepipe and diverter valve. When more boost is added these areas have proven to be the first to show problems. If the diverter valves fail, you lose precious boost and horsepower, rendering your upgrade worthless. Our products are designed to be stronger and more durable than the factory components to a) keep your boost levels where you want, and b) protect other internal turbo-related components from boost damage.
You're currently viewing parts for your (F34) 3-Series Gran Turismo 2014+. Reset your chassis
For accurate results, specify your model below.

F22, F3X Dinan Performance Dual Core Intercoolers

For vehicles without Active Cruise Control
F22, F3X Dinan Performance Dual Core Intercoolers

When modifying the car and increasing boost, installing an upgraded intercooler is essential to keep the engine computer from restraining boost as temperatures climb. The stock air-air intercooler is quickly overcome with heat and can't keep the intake air cool enough. If it's too hot the engine computer will reduce power to safer levels. This Dinan intercooler is a dual-core air-air design with an astounding 240% more surface area than the factory intercooler. The temperature at boost is 60% cooler at 6,250 RPM with the Dinan Dual Core compared to stock. Even heat soak at low speeds is reduced, making this a worthwhile addition even for stock or mildly tuned engines. Professional installation is strongly recommended as bumper removal is required and several pieces in the front end need to be cut and trimmed. The factory charge piping in and out of the intercooler is re-used.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. The intercooler is worth 2 points towards your Dinan badge.

Click here for full installation instructions, including fitment details. We strongly recommend reviewing these instructions prior to purchasing so you will be familiar with the small differences among models and front bumper designs.

This item fits the following BMWs:
2014+ F22 F23 BMW 228i 228iX M235i M235iX
2012-2015 F30 BMW 320i 328i 328i X-Drive 335i 335i X-Drive - Sedan
2012-2015 F31 BMW 328i X-Drive - Touring Wagon
2012-2016 F32 BMW 428i 428i X-Drive 435i 435i X-Drive - Coupe
2012-2015 F34 BMW 328i 328i X-Drive 335i 335i X-Drive - Gran Turismo
2012-2016 F36 BMW 428i 428i X-Drive 435i 435i X-Drive - GranCoupe

Dinan
Part #: D330-0021
Price: $981.59 (USD) 
Direct Ship
Quantity:   
5MM Silicone Vacuum Hose - Red - 9 Feet Car suffering from vacuum leaks? This vacuum hose has a 5mm inner diameter. 
Forge
Part #: vc05r
Price: $12.56 (USD) 
$13.95 (Sale - Save 10%)
In Stock
Quantity:   
AC Schnitzer Stage 1 Performance Intercooler - F22 F23 F30 F32 F33 F34 F36

This competition intercooler kit utilizes a tube fin center core unit, for cooler temperatures and less pressure drop. This is for ideal for owners who are going to install a tuner, build a competition car or operate in hot climates. This can be used on the street, track, and for an everyday driving and will allow cooler temps and more air flow through the core!

One of the key features of this kit is that it's a direct bolt-on replacement for your stock intercooler. This means no removing the bumper or modifying brackets or wrestling with plumbing. AC Schnitzer has engineered their end-tanks in aluminum to replace the factory plastic, which is more durable long-term. The CAD and FEM process also allows them to design the internals free if any restrictions. This is a truly outstanding all-around intercooler upgrade! 

For further enhanced cooling, check out the stage 2 from AC Schnitzer!

AC Schnitzer
Part #: 1751220310
Price: $1495.00 (USD) 
Direct Ship
Quantity:   
Recirculating Valve Kit - N20

This Blow Off, or Dump valve, is for the BMW N20 2.0 Turbo engines that have the electronically controlled bypass valve. It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred, where the original rubber diaphragm splits, which causes a loss of boost pressure. Unfortunately the failure doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure, so you may not be aware that you are losing power due to this.

Our alternative is a fully engineered solution offering significantly improved reliability. Our valve is piston based with no diaphragm to fail, and of all aluminium construction. It replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation.

Forge
Part #: FMDVN20R
Price: $234.00 (USD) 
$260.00 (Sale - Save 10%)
Direct Ship
Free Shipping Free Shipping
Quantity:   
Forge
Part #: TP-45B
Price: $22.68 (USD) 
$25.20 (Sale - Save 10%)
Direct Ship
Quantity:   
3MM Silicone Vacuum Hose - Blue - 9 Feet Car suffering from vacuum leaks? This vacuum hose has a 3mm inner diameter. 
Forge
Part #: vc03
Price: $13.46 (USD) 
$14.95 (Sale - Save 10%)
In Stock
Quantity:   
6MM Silicone Vacuum Hose - Blue - 9 Feet Car suffering from vacuum leaks? This vacuum hose has a 6mm inner diameter. 
Forge
Part #: vc06
Price: $19.76 (USD) 
$21.95 (Sale - Save 10%)
In Stock
Quantity:   
Wagner Evo I Performance Front Mount Intercooler - F22 M235i, F30 328i/335i, F32 428i/435i

Includes $25 Turner Motorsport gift card for the month of June!

Wagner intercoolers (#200001040) are engineered in Germany to be a superior N20/N55 intercooler than the factory part. With 85% more surface area than the factory IC the Wagner-designed kit is much more efficient. And that helps maintain your boost levels and performance! The factory intercooler is quickly overcome with heat and that leads to a loss of boost and performance. Factor in greater boost levels and other modifications and the more heat soak will put you out of the running. The solution is an intercooler with more capacity for cooling and the best intercooler upgrade is one that not only works but also installs with a minimum amount of fuss.

This Evo I intercooler features a bar and plate type that is great for owners with light modifications and is great for use on the street or track.

Compared to the stock OEM intercooler:

We also offer the Competition intercooler kit for cars with additional modifications that may require additional cooling and less pressure drop.

One of the best features of this kit is that it's a direct bolt-on replacement for your stock intercooler - no removing the bumper or modifying brackets or wrestling with plumbing. Wagner has also engineered their end-tanks in aluminum instead of the factory plastic, which is much more durable over the long term. The CAD and FEM process also allows them to design their cooler internals without any bottlenecks or restrictions. This is just the best all-around intercooler upgrade we have seen for the F30 335! Fits both N20 and N55 cars.

 

Size Comparison
LDH
Wagner Evo I   520mm x 210mm x 130mm
stock OEM       510mm x 130mm x 110mm


This FMIC fits the following BMWs:
2014+ F22 BMW 228i M235i
2012+ F30 BMW 320i 328i 335i - Sedan
2012+ F31 BMW 328i - Wagon
2014+ F34 BMW 328i xDrive GT, 335i xDrive GT - Gran Tourismo
2014+ F32 BMW 428i 435i 435iX - Coupe
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 435i Gran Coupe 435i xDrive Gran Coupe

Wagner Tuning
Part #: 200001040KT
Price: $690.00 (USD) 
Direct Ship
Quantity:   
AFE
Part #: 46-20229-R
Price: $370.00 (USD) 
Direct Ship
Quantity:   
AC Schnitzer Stage 2 Performance Intercooler - F22 F23 F30 F32 F33 F34 F36

This competition intercooler kit utilizes a tube fin center core unit, for cooler temperatures and less pressure drop. This is for ideal for owners who are going to install a tuner, build a competition car or operate in hot climates. This can be used on the street, track, and for an everyday driving and will allow cooler temps and more air flow through the core!

One of the key features of this kit is that it's a direct bolt-on replacement for your stock intercooler. This means no removing the bumper or modifying brackets or wrestling with plumbing. AC Schnitzer has engineered their end-tanks in aluminum to replace the factory plastic, which is more durable long-term. The CAD and FEM process also allows them to design the internals free if any restrictions. This is a truly outstanding all-around intercooler upgrade! 

This stage 2 features a 20% larger core than the stage one for further enhanced cooling! 

AC Schnitzer
Part #: 1751220410
Price: $1595.00 (USD) 
Direct Ship
Quantity:   
4MM Silicone Vacuum Hose - Black - 9 Feet Car suffering from vacuum leaks? This vacuum hose has a 4mm inner diameter. 
Forge
Part #: vc04b
Price: $12.56 (USD) 
$13.95 (Sale - Save 10%)
In Stock
Quantity:   
Wagner EVO 2 Performance Front Mount Intercooler Kit - BMW F20 F30

Includes $25 Turner Motorsport gift card for the month of June!

Wagner Competition intercoolers (#200001066) are engineered in Germany to be a superior N20/N55 intercooler than the factory part. With 85% more surface area and 90% more volume than the factory IC the Wagner-designed kit is much more efficient. And that helps maintain your boost levels and performance! The factory intercooler is quickly overcome with heat and that leads to a loss of boost and performance. Factor in greater boost levels and other modifications and the more heat soak will put you out of the running. The solution is an intercooler with more capacity for cooling and the best intercooler upgrade is one that not only works but also installs with a minimum amount of fuss. 

This competition intercooler kit utilizes a tube fin center core unit, for cooler temperatures and less pressure drop. This is for ideal for owners who are going to install a tuner, build a competition car or operate in hot climates. This can be used on the street, track, and for an everyday driving and will allow cooler temps and more air flow through the core! 



One of the best features of this kit is that it's a direct bolt-on replacement for your stock intercooler - no removing the bumper or modifying brackets or wrestling with plumbing. Wagner has also engineered their end-tanks in aluminum instead of the factory plastic, which is much more durable over the long term. The CAD and FEM process also allows them to design their cooler internals without any bottlenecks or restrictions. This is just the best all-around intercooler upgrade we have seen for the F30 335! Fits both N20 and N55 cars. 

Size Comparison
LDH
Wagner Performance 520mm x 215mm x 145mm /stepped with a 13.8cm flow rate
stock OEM                 510mm x 130mm x 110mm with a 7.3 cm flow rate


This FMIC fits the following BMWs: 
2014+ F22 BMW 228i M235i 
2012+ F30 BMW 320i 328i 335i - Sedan 
2012+ F31 BMW 328i - Wagon 
2014+ F34 BMW 328i xDrive GT, 335i xDrive GT - Gran Tourismo 
2014+ F32 BMW 428i 435i 435iX - Coupe 
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 435i Gran Coupe 435i xDrive Gran Coupe 

Wagner Tuning
Part #: 200001066KT
Price: $790.00 (USD) 
Direct Ship
Quantity:   
Wagner Evo I Competition Front Mount Intercooler - F22 M235i, F30 328i/335i, F32 428i/435i

Includes $25 Turner Motorsport gift card for the month of June!

Wagner Competition intercoolers (#200001046) are engineered in Germany to be a superior N20/N55 intercooler than the factory part. With 85% more surface area than the factory IC the Wagner-designed kit is much more efficient. And that helps maintain your boost levels and performance! The factory intercooler is quickly overcome with heat and that leads to a loss of boost and performance. Factor in greater boost levels and other modifications and the more heat soak will put you out of the running. The solution is an intercooler with more capacity for cooling and the best intercooler upgrade is one that not only works but also installs with a minimum amount of fuss.

This competition intercooler kit utilizes a tube fin center core unit, for cooler temperatures and less pressure drop. This is for ideal for owners who are going to install a tuner, build a competition car or operate in hot climates. This can be used on the street, track, and for an everyday driving and will allow cooler temps and more air flow through the core!

Compared to the stock OEM intercooler:


One of the best features of this kit is that it's a direct bolt-on replacement for your stock intercooler - no removing the bumper or modifying brackets or wrestling with plumbing. Wagner has also engineered their end-tanks in aluminum instead of the factory plastic, which is much more durable over the long term. The CAD and FEM process also allows them to design their cooler internals without any bottlenecks or restrictions. This is just the best all-around intercooler upgrade we have seen for the F30 335! Fits both N20 and N55 cars.

Size Comparison
LDH
Wagner Competition  520mm x 210mm x 130mm
stock OEM                 510mm x 130mm x 110mm


This FMIC fits the following BMWs:
2014+ F22 BMW 228i M235i
2012+ F30 BMW 320i 328i 335i - Sedan
2012+ F31 BMW 328i - Wagon
2014+ F34 BMW 328i xDrive GT, 335i xDrive GT - Gran Tourismo
2014+ F32 BMW 428i 435i 435iX - Coupe
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 435i Gran Coupe 435i xDrive Gran Coupe

Wagner Tuning
Part #: 200001046KT
Price: $850.00 (USD) 
Direct Ship
Quantity:   
Forge Aluminum Replacement Atmospheric Valve - N20

It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred, where the original rubber diaphragm splits, which causes a loss of boost pressure. Unfortunately the failure doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure, so you may not be aware that you are losing power due to this.

Our alternative is a fully engineered solution offering significantly improved reliability. Our valve is piston based with no diaphragm to fail, and of all aluminium construction. It replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation.

Forge
Part #: FMDVN20A
Price: $261.00 (USD) 
$290.00 (Sale - Save 10%)
Direct Ship
Quantity:   
3MM Silicone Vacuum Hose - Red - 9 Feet Car suffering from vacuum leaks? This vacuum hose has a 3mm inner diameter. 
Forge
Part #: vc03r
Price: $13.46 (USD) 
$14.95 (Sale - Save 10%)
In Stock
Quantity:   
6MM Silicone Vacuum Hose - Black - 9 Feet Car suffering from vacuum leaks? This vacuum hose has a 6mm inner diameter. 
Forge
Part #: vc06b
Price: $15.26 (USD) 
$16.95 (Sale - Save 10%)
In Stock
Quantity:   
4MM Silicone Vacuum Hose - Blue - 9 Feet Car suffering from vacuum leaks? This vacuum hose has a 4mm inner diameter. 
Forge
Part #: vc04
Price: $10.76 (USD) 
$11.95 (Sale - Save 10%)
In Stock
Quantity:   
Universal Silicone 90 Elbow - 60mm - 2 3/8' ID Black Forge Motorsport universal 90 degree elbow with a 60mm diameter.
Forge
Part #: A90-60B
Price: $26.10 (USD) 
$29.00 (Sale - Save 10%)
Direct Ship
Quantity:   
5MM Silicone Vacuum Hose - Black - 9 Feet Car suffering from vacuum leaks? This vacuum hose has a 5mm inner diameter. 
Forge
Part #: vc05b
Price: $12.56 (USD) 
$13.95 (Sale - Save 10%)
In Stock
Quantity:   
3MM Silicone Vacuum hose - Black - 9 feet Car suffering from vacuum leaks? This vacuum hose has a 3mm inner diameter. 
Forge
Part #: vc03b
Price: $13.46 (USD) 
$14.95 (Sale - Save 10%)
In Stock
Quantity:   
AFE
Part #: 46-20229-B
Price: $350.00 (USD) 
Direct Ship
Quantity:   
5MM Silicone Vacuum Hose - Blue - 9 Feet Car suffering from vacuum leaks? This vacuum hose has a 5mm inner diameter. 
Forge
Part #: vc05
Price: $12.56 (USD) 
$13.95 (Sale - Save 10%)
In Stock
Quantity:   
AFE
Part #: 46-20230AS
Price: $35.00 (USD) 
Direct Ship
Quantity:   
AFE
Part #: 46-20222-B
Price: $1410.00 (USD) 
Direct Ship
Quantity:   
4MM Silicone Vacuum Hose - Red - 9 Feet Car suffering from vacuum leaks? This vacuum hose has a 4mm inner diameter. 
Forge
Part #: vc04r
Price: $14.36 (USD) 
$15.95 (Sale - Save 10%)
In Stock
Quantity:   
Wagner EVO 2 Competition Front Mount Intercooler Kit - BMW F20 F30

Includes $25 Turner Motorsport gift card for the month of June!

Wagner Competition intercoolers (#200001071) are engineered in Germany to be a superior N20/N55 intercooler than the factory part. With 85% more surface area and 90% more volume than the factory IC the Wagner-designed kit is much more efficient. And that helps maintain your boost levels and performance! The factory intercooler is quickly overcome with heat and that leads to a loss of boost and performance. Factor in greater boost levels and other modifications and the more heat soak will put you out of the running. The solution is an intercooler with more capacity for cooling and the best intercooler upgrade is one that not only works but also installs with a minimum amount of fuss. 

This competition intercooler kit utilizes a tube fin center core unit, for cooler temperatures and less pressure drop. This is for ideal for owners who are going to install a tuner, build a competition car or operate in hot climates. This can be used on the street, track, and for an everyday driving and will allow cooler temps and more air flow through the core! 

Compared to the stock OEM intercooler:


One of the best features of this kit is that it's a direct bolt-on replacement for your stock intercooler - no removing the bumper or modifying brackets or wrestling with plumbing. Wagner has also engineered their end-tanks in aluminum instead of the factory plastic, which is much more durable over the long term. The CAD and FEM process also allows them to design their cooler internals without any bottlenecks or restrictions. This is just the best all-around intercooler upgrade we have seen for the F30 335! Fits both N20 and N55 cars. 

Size Comparison
LDH
Wagner Performance  520mm x 215mm x 145mm /stepped with a 13.8cm flow rate weighing 8.6 grams
stock OEM                  510mm x 130mm x 110mm with a 7.3 cm flow rate


This FMIC fits the following BMWs: 
2014+ F22 BMW 228i M235i 
2012+ F30 BMW 320i 328i 335i - Sedan 
2012+ F31 BMW 328i - Wagon 
2014+ F34 BMW 328i xDrive GT, 335i xDrive GT - Gran Tourismo 
2014+ F32 BMW 428i 435i 435iX - Coupe 
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 435i Gran Coupe 435i xDrive Gran Coupe 

Wagner Tuning
Part #: 200001071KT
Price: $900.00 (USD) 
Direct Ship
Quantity:   
6MM Silicone Vacuum Hose - Red - 9 Feet Car suffering from vacuum leaks? This vacuum hose has a 6mm inner diameter. 
Forge
Part #: vc06r
Price: $15.26 (USD) 
$16.95 (Sale - Save 10%)
In Stock
Quantity: