Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

BMW F80 Front Spoilers, Bumper Covers, & Air Dams

BMW F80 Front Spoilers, Bumper Covers, & Air Dams Improve the look and the aerodynamics of your BMW with one of our replacement front spoilers or bumpers. Upgrading your BMW's front end with a lip spoiler, front spoiler lips, or a full bumper cover can completely transform the look of your BMW. We carry a variety of OEM BMW front spoilers and aftermarket front spoilers including the M-Tech, ZHP, M3 CSL and M5 style bumpers to suit your needs.

Looking for a rear wing or rear spoiler?
Check out our Rear Spoilers & Wings page.
You're currently viewing parts for your (F80) M3 2015+. Reset your chassis
For accurate results, specify your model below.
Turner Motorsport Skid Plate - Wrinkle Black Powdercoat Finish - F80 M3, F82/83 M4

Since the F8x M3/M4 was designed to make impressive power in stock form (and loads more with upgrades) these cars feature some heavy duty cooling hardware. In order to keep oil temperatures down (something many late model M cars have struggled with) requires a large oil cooler. BMW engineers positioned the oil cooler quite low under the car, positioned horizontally - an aerodynamic design which creates a vacuum force while driving, drawing heat from the oil cooler. The issue some of the vehicle owners have experienced is road debris from small branches to chunks of ice have impacted the OE belly pan hard enough to crack the oil cooler draining the cars oil rapidly. Being one of the lowest points of the car, even a close encounter with a parking block can mean the end of the road for the factory belly pan - and oil cooler. Damage to the belly pan means reduced cooling, which can result in dangerously high engine temperatures. Once the belly pan is damaged, there is no longer any protection for the oil cooler, meaning damage to the cooler and a catastrophic loss in oil pressure may be right around the corner.

The lightweight Turner skid plate comes in just 3 lbs heavier than stock with a total weight of just 5 lbs - additional poundage that is a valuable addition. Designed using 8 gauge 5052 aluminum, this skid plate offers plenty of strength to protect your oil cooler. We also made sure this would be an easy, reversible upgrade by maintaining OE mounting locations and hardware that requires NO cutting or modification to your vehicle for fitment. Our engineering team also felt it was important to maintain some of the cooling features the BMW engineers spec'd out such as having a trim seal to fit snugly against the cooler edges to create the same vacuum cooling effects as stock.

Features:

  • In-house designed to maintain OE cooling and fitment
  • Manufactured from 8 gauge 5052 aluminum
  • Maintains factory hardware and mounting points
  • No cutting, drilling, or modification required
  • 5 lbs total weight, only 3 lbs more than the plastic OE
  • Made in America!

If new factory hardware is required, use part number 07149126886. 11 required in total to secure this skid plate.

Turner Motorsport
Part #: 021491TMS01A-02
Price: $449.95 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
Universal Carbon Fiber Splitter

Stand out by adding aggressive exterior styling to your vehicle with our universal front splitters. We use carbon fiber to make their front splitters - paint match to your preference or install as is.

These do not include hardware - drilling is required for mounting, but will fit any bumper with proper installation.

AUTOTECKNIC
Part #: UN-0001-CF
Price: $149.95 (USD) 
Back Ordered, Contact Us
Free Shipping Free Shipping
Quantity:   
Carbon Fiber Front Splitters - F80 M3, F82 M4

These carbon fibre front splitters can be added to the F80 M3 and F82 M4 front bumper for a much more aggressive appearance. The splitter mounts over the existing outer cooling ducts and is used to direct air either into the air duct or to the air curtains. The optional lower horizontal splitter makes the front end even more aggressive.

 Installation Instructions

This item fits the following BMWs:
2015+ F80 BMW M3
2015+ F82 BMW M4

AUTOTECKNIC
Part #: 51192350712
Price: $604.95 (USD) 
Ships on Aug 23, 2018
Free Shipping Free Shipping
Quantity:   
2x2 Weave Carbon Fiber Front Lip - F80 F82 M3 M4

This front lip for your ///M features the same OEM fit and finish that can be expected of any RKP composite product.

RKP offers the highest quality carbon fiber parts for your BMW that add functionality and style to your BMW. RKP is closely involved with BMW's M Division, boasting a line of track-proven hand laid carbon fiber components of the quality your BMW deserves.

RKP
Part #: RKP-F8X-FL-2
Price: $995.00 (USD) 
Direct Ship
Quantity:   
AC Schnitzer Front Spoiler - F8X M3

Schnitzer got it's start racing BMW's in 1967 and has since gone onto win many championships in DTM, WTCC and other touring car series. In 1987 AC Schnitzer started manufacturing custom high performance products for BMW's using their knowledge from years of racing and winning with BMW's. AC Schnitzer offers the highest quality components for your BMW. This is just the lower portion of the lip.

In order for this lip to fit, you will also need T#396897 

This product fits the following vehicles
2016+ F80 BMW M3

AC Schnitzer
Part #: 5111282550
Price: $810.00 (USD) 
Direct Ship
Quantity:   
Competition Carbon Fiber Bumper Trim - F80 M3 | F82/ F83 M4

Everyone loves details. These carbon fiber bumper trims are a subtle carbon detail that allows you to tie together the carbon fiber theme of your vehicle.

This product fits the following BMWs:
2015+ F80 M3
2015+ F82 M4 M4 GTS
2015+ F83 M4 Convertible

 

AUTOTECKNIC
Part #: BM-0088
Price: $219.95 (USD) 
Ships on Aug 23, 2018
Quantity:   
Front Bumper Carbon Fiber Canards - F80 M3 F82 M4

Canards look great and increase downforce at high speeds. The added downforce from the canards stabilizes your car during hard cornering by increasing traction - making your days on the track more fun.

This product fits the following BMWs:
2015+ F80 M3
2015+ F82 M4 M4 GTS

AUTOTECKNIC
Part #: BM-0087
Price: $179.95 (USD) 
Ships on Aug 23, 2018
Quantity:   
RKP 1x1 Weave Carbon Fiber Front Lip - F80 F82 M3 M4

This front lip for your ///M features the same OEM fit and finish that can be expected of any RKP composite product.

RKP offers the highest quality carbon fiber parts for your BMW that add functionality and style to your BMW. RKP is closely involved with BMW's M Division, boasting a line of track-proven hand laid carbon fiber components of the quality your BMW deserves.

RKP
Part #: RKP-F8X-FL-1
Price: $995.00 (USD) 
Direct Ship
Quantity:   
F8X M3/M4 3D Design Carbon Fiber Front Lip Spoiler

This 3D Design front lip spoiler was designed to provide an aggressive, individual stylistic touch to your BMW without being overbearing. Constructed from high-quality carbon fiber, this part attaches easily and accentuates your BMW's natural body lines, creating a high-class performance look. Professional installation is recommended.

3D Design is focused on high-quality styling components that allow you to personalize the look of your BMW & remain true to the car's original form. Inspired by European tuning trends & Japan's unique VIP tuning style, their wide range of lips, diffusers, side skirts, & spoilers are made from high-quality urethane or super light, super strong prepreg dry carbon and install to your factory bumpers & skirts to offer an understated, aggressive performance look. 

3D Design
Part #: 3101-28211
Price: $2195.00 (USD) 
Direct Ship
Quantity:   
RKP Acid Orange GTS Lower Front Lip - F80 F82 M3 M4

RKP's GTS front lip is proven to create noticeably more downforce on the track - add GTS styling and performance to your M4. This front lip for your ///M features the same OEM fit and finish that can be expected of any RKP composite product.

RKP offers the highest quality carbon fiber parts for your BMW that add functionality and style to your BMW. RKP is closely involved with BMW's M Division, boasting a line of track-proven hand laid carbon fiber components of the quality your BMW deserves.

RKP
Part #: RKP-F8X-GTSLS-P
Price: $1245.00 (USD) 
Direct Ship
Quantity:   
M Performance carbon fiber front lip - F80,82,83 M3/M4 Looking for a little more aggressive looks for the front end of your BMW? Here's your chance with a new M Performance front lip spoiler. Finished in carbon fiber to give your vehicles some added style.
Genuine BMW
Part #: 51192410360
Price: $1390.50 (USD) 
$1570.00 (11% off MSRP)
Ships in 6 days
Quantity:   
Carbon Fiber Sideskirt Splitter Set - F80 M3 Make your F80 M3 stand out from the crowd with these carbon fiber side skirt splitters ! These carbon fiber side blades mount to the bottom of your existing factory side skirts to provide more aggressive look. These made from 4 layers of dry carbon fiber.

This item fits the following BMWs:
2015+ F80 BMW M3
Turner Motorsport
Part #: TMS213607
Price: $1245.00 (USD) 
Direct Ship
Quantity:   
M Performance Carbon Fiber Front Splitters - F80 M3, F82 M4 As on our Project F80 M3
This BMW Performance front splitter in Carbon Fibre can be added to the F80 M3 and F82 M4 front bumper for a much more aggressive appearance. The splitter mounts over the existing outer cooling ducts and is used to direct air either into the air duct or to the air curtains. The optional lower horizontal splitter makes the front end even more aggressive. Together, the M Performance Splitters have a dynamic and pronounced visual impact to the M3 / M4 bumper. This is the factory BMW M Performance part. Installation Instructions

This item fits the following BMWs:
2015+ F80 BMW M3
2015+ F82 BMW M4
Genuine BMW
Part #: 51192350712
Price: $694.42 (USD) 
$760.00 (9% off MSRP)
In Stock
Free Shipping Free Shipping
Quantity:   
RKP 1x1 Weave GTS Lower Front Lip - F80 F82 M3 M4

RKP's GTS front lip is proven to create noticeably more downforce on the track - add GTS styling and performance to your M4. This front lip for your ///M features the same OEM fit and finish that can be expected of any RKP composite product.

RKP offers the highest quality carbon fiber parts for your BMW that add functionality and style to your BMW. RKP is closely involved with BMW's M Division, boasting a line of track-proven hand laid carbon fiber components of the quality your BMW deserves.

RKP
Part #: RKP-F8X-GTSLS-1
Price: $995.00 (USD) 
Direct Ship
Quantity:   
Turner Motorsport Skid Plate - Natural Finish - F80 M3, F82/83 M4

Since the F8x M3/M4 was designed to make impressive power in stock form (and loads more with upgrades) these cars feature some heavy duty cooling hardware. In order to keep oil temperatures down (something many late model M cars have struggled with) requires a large oil cooler. BMW engineers positioned the oil cooler quite low under the car, positioned horizontally - an aerodynamic design which creates a vacuum force while driving, drawing heat from the oil cooler. The issue some of the vehicle owners have experienced is road debris from small branches to chunks of ice have impacted the OE belly pan hard enough to crack the oil cooler - draining the car's oil rapidly. Being one of the lowest points of the car, even a close encounter with a parking block can mean the end of the road for the factory belly pan - and oil cooler. Damage to the belly pan means reduced cooling, which can result in dangerously high engine temperatures. Once the belly pan is damaged, there is no longer any protection for the oil cooler, meaning damage to the cooler and a catastrophic loss in oil pressure may be right around the corner.

The lightweight Turner skid plate comes in just 3 lbs heavier than stock with a total weight of just 5 lbs - additional poundage that is a valuable addition. Designed using 8 gauge 5052 aluminum, this skid plate offers plenty of strength to protect your oil cooler. We also made sure this would be an easy, reversible upgrade by maintaining OE mounting locations and hardware that requires NO cutting or modification to your vehicle for fitment. Our engineering team also felt it was important to maintain some of the cooling features the BMW engineers spec'd out such as having a trim seal to fit snugly against the cooler edges to create the same vacuum cooling effects as stock.

Features:

  • In-house designed to maintain OE cooling and fitment
  • Manufactured from 8 gauge 5052 aluminum
  • Maintains factory hardware and mounting points
  • No cutting, drilling, or modification required
  • 5 lbs total weight, only 3 lbs more than the plastic OE
  • Made in America!

If new factory hardware is required, use part number 07149126886. 11 required in total to secure this skid plate.

Turner Motorsport
Part #: 021491TMS01
Price: $449.95 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
RKP 1x1 Weave GTS Front Lip - F80 F82 M3 M4

RKP's GTS front lip is proven to create noticeably more downforce on the track - add GTS styling and performance to your M4. This front lip for your ///M features the same OEM fit and finish that can be expected of any RKP composite product.

RKP offers the highest quality carbon fiber parts for your BMW that add functionality and style to your BMW. RKP is closely involved with BMW's M Division, boasting a line of track-proven hand laid carbon fiber components of the quality your BMW deserves.

RKP
Part #: RKP-F8X-GTSFL-2
Price: $1295.00 (USD) 
Direct Ship
Quantity:   
AC Schnitzer Front Spoiler - F8X M3

Schnitzer got it's start racing BMW's in 1967 and has since gone onto win many championships in DTM, WTCC and other touring car series. In 1987 AC Schnitzer started manufacturing custom high performance products for BMW's using their knowledge from years of racing and winning with BMW's. AC Schnitzer offers the highest quality components for your BMW.

This product fits the following vehicles
2016+ F80 BMW M3

AC Schnitzer
Part #: 5111280510
Price: $1795.00 (USD) 
Direct Ship
Quantity:   
RKP 1x1 Weave GTS Front Lip - F80 F82 M3 M4

RKP's GTS front lip is proven to create noticeably more downforce on the track - add GTS styling and performance to your M4. This front lip for your ///M features the same OEM fit and finish that can be expected of any RKP composite product.

RKP offers the highest quality carbon fiber parts for your BMW that add functionality and style to your BMW. RKP is closely involved with BMW's M Division, boasting a line of track-proven hand laid carbon fiber components of the quality your BMW deserves.

RKP
Part #: RKP-F8X-GTSFL-1
Price: $1295.00 (USD) 
Direct Ship
Quantity:   
VRS GTS Aero Carbon Fiber Front Spoiler - F8X M3 M4

This Vorsteiner front lip spoiler was designed to provide an aggressive, individual stylistic touch to your BMW without being overbearing. Constructed from high-quality 2x2 twill weave, this part attaches easily and accentuates your BMW's natural body lines, thus creating a high-class performance look. Professional installation is recommended.

Vorsteiner is a company that was conceived through the imagination of creating the highest quality parts for the most discerning vehicles and clientele. The relentless pursuit of advancement and perfection is seen not only in the unmatched automotive parts, but also in the hands of carbon fiber craftsmen to create purely sensational parts for the most deserving and elite vehicles. 

Vorsteiner
Part #: 4000BMV
Price: $1695.00 (USD) 
Direct Ship
Quantity:   
M Performance Lower Front Splitter - F80 M3, F82 M4


This BMW Performance lower front splitter can be added to the splitters (#51192350712) F80 M3 and F82 M4 front bumper for a much more aggressive appearance. The splitter is the horizontal aero trim piece located below the bumper and is used to direct air either above or below it. This piece attaches to the two front "lips" 51192350712 on either side of the bumper below the spoiler ducts. Together, the M Performance Splitter is a dynamic and pronounced visual impact to the stock M3 / M4 bumper. This is the factory BMW Performance part. Installation Instructions

*Requires use of upper splitter set (51192350712)*

This item fits the following BMWs:
2015+ F80 BMW M3
2015+ F82 BMW M4

Genuine BMW
Part #: 51192350711
Price: $416.27 (USD) 
$470.00 (11% off MSRP)
In Stock
Quantity:   
F8X M3/M4 3D Design Carbon Fiber Front Lip Spoiler

This 3D Design front splitter was designed to provide an aggressive, individual stylistic touch to your BMW without being overbearing. Constructed from beautiful carbon fiber, this part attaches easily and accentuates your BMW's natural body lines, creating a high-class performance look. 

3D Design is focused on high-quality styling components that allow you to personalize the look of your BMW & remain true to the car's original form. Inspired by European tuning trends & Japan's unique VIP tuning style, their wide range of lips, diffusers, side skirts, & spoilers are made from high-quality urethane or super light, super strong prepreg dry carbon and install easily to your factory bumpers & skirts to offer an understated, aggressive performance look.

3D Design
Part #: 3103-28211
Price: $7796.12 (USD) 
Direct Ship
Quantity:   
AC Schnitzer Front Lip Canards - F8X M3

Schnitzer got it's start racing BMW's in 1967 and has since gone onto win many championships in DTM, WTCC and other touring car series. In 1987 AC Schnitzer started manufacturing custom high performance products for BMW's using their knowledge from years of racing and winning with BMW's. AC Schnitzer offers the highest quality components for your BMW.

This product fits the following vehicles
2016+ F80 BMW M3

AC Schnitzer
Part #: 5111280520
Price: $1495.00 (USD) 
In Stock
Quantity:   
Genuine BMW Underhood Shield -M- - 51758054269 - F80 M3,F82 M4,F83

Genuine BMW Underhood Shield - -M-
This item fits the following BMW Chassis:
F80 M3,F82 M4,F83

Genuine BMW
Part #: 51758054269
Price: $107.50 (USD) 
$155.59 (31% off MSRP)
In Stock
Free Shipping Free Shipping
Quantity:   
Front Add-On Carbon Fiber Spoiler - F80 M3 F82 M4 This front splitter is both beautiful and fully functional as it adds downforce to the front end of the F80 M3 & F82 M4. It is designed and engineered to mate perfectly with the stock M3/M4 front bumper and it is a direct bolt-on item for ANY 2014+ BMW M3/M4. Made of 5 layers of dry carbon fiber this front splitter this spoiler attaches to the lower portions of the stock front bumper. Aerodynamically the splitter helps to direct air around the sides which reduces lift and increases downforce.

This item fits the following BMWs:
2015+ F80 BMW M3
2015+ F82 BMW M4
Turner Motorsport
Part #: TMS211050
Price: $1295.00 (USD) 
Direct Ship
Quantity:   
Vorsteiner Front Add-On Carbon Fiber Spoiler - F80 M3 F82 M4 Show off the racing heritage of your F80 M3 and F82 M4 with this Vorsteiner carbon fiber front add-on spoiler! This lip spoiler mounts to the bottom of your existing factory front bumper to provide a lower and more agressive look.

Vorsteiner is a company that was conceived through the imagination of creating the highest quality parts for the most discerning vehicles and clientele. Their relentless pursuit of advancement and perfection is seen not only in their unmatched automotive parts, but also in the hands of carbon fiber craftsmen to create purely sensational parts for the most deserving and elite vehicles.

Every Vorsteiner product is rigorously tested and must pass our highly detailed quality control before leaving the on-site Vorsteiner factory. Only after rigorous testing can a part be deemed worthy of the Vorsteiner name. Our clientele expect nothing less than perfection from Vorsteiner, and we welcome and exceed these expectations.

Vorsteiner's Autoclaved Pre-Preg Carbon Fiber structure gives our parts superior stiffness, aerospace strength & durability compared to traditional hand laid carbon fiber composites.

This item fits the following BMWs:
2015+ F80 BMW M3
2015+ F82 BMW M4
Vorsteiner
Part #: TMS204877
Price: $1695.00 (USD) 
Direct Ship
Mode Carbon GTS Front Splitter - F80 M3, F82 M4 As used on the Turner M3/M4 Project Cars With Mode Carbon's GTS front spoiler, they strove to create something different from the rest of the their product offerings. The GTS front spoiler derives its inspiration from the motorsport-purposed M4 GTS prepoduction vehicle that was spied flying around the Nurburgring. The design is optimized for functionality, offering an unprecedented blend of aggression and style that is ideal for the track and street usere that demands top tier performance from their BMW.

This item fits the following BMWs:
2015+ F80 BMW M3
2015+ F82 BMW M4
Mode Carbon
Part #: ST8X
Price: $1795.00 (USD) 
Ships on Aug 24, 2018
Quantity:   
RKP 2x2 Weave GTS Lower Front Lip - F80 F82 M3 M4

RKP's GTS front lip is proven to create noticeably more downforce on the track - add GTS styling and performance to your M4. This front lip for your ///M features the same OEM fit and finish that can be expected of any RKP composite product.

RKP offers the highest quality carbon fiber parts for your BMW that add functionality and style to your BMW. RKP is closely involved with BMW's M Division, boasting a line of track-proven hand laid carbon fiber components of the quality your BMW deserves.

RKP
Part #: RKP-F8X-GTSLS-2
Price: $995.00 (USD) 
Direct Ship
Quantity: