Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

BMW F80 Borla Performance Exhaust Systems

BMW F80 Borla Performance Exhaust Systems We've been big fans of Borla Exhaust for BMWs since we opened our doors in 1993. Borla produces some of the best-sounding, lightest, longest lasting exhausts on the market. These systems are made in the USA with true T-304 stainless steel inside and out and backed with a 1,000,000 mile warranty. Borla puts and emphasis on quality by using stainless steel throughout their piping and muffler bodies (not a mild steel or coated aluminum). This ensures the muffler does not deteriorate from the inside out. Borla designs their exhausts to complement a BMW's understated sportiness, not overpower it. Borla produces each system to have a deep, sporty tone that doesn't offend or intrude on the cabin. So you hear the exhaust when you want to, not all the time. Most Borla BMW exhausts are a true-cat back and bolt or clamp to the original catalytic converter for an easy install. Each system is engineered for the application and refined in their own sound lab - changing pipe sizing, layout, and incorporating mufflers and/or resonators as needed to achieve a sporty yet refined sound. Borla also produces full race exhausts for the committed enthusiast with cat-delete and test pipes.
You're currently viewing parts for your (F80) M3 2015+. Reset your chassis
For accurate results, specify your model below.
Borla Sport Exhaust System - F80 M3, F82 M4 Section: complete exhaust from the catalytic converter back, non resonator, Borla performance muffler
Installation: clamp-on
Tip Style: round 88mm Borla angle cut


This stainless steel rear exhaust section replaces the heavy (and restrictive) stock exhaust system on the F80 M3 or F80 M4 with S55 engine. Shed excess weight and restriction, and get a better sound! You will love the rich, deep sound this tuned system gives your M3 or M4. There's a throaty and purposeful growl at low RPM and at cruise that highlights the six-cylinder engine under the hood. And if you have tuned your BMW to make more boost than stock, you will greatly appreciate the Borla design without the restrictive resonator and muffler.

Every Borla is made with 304 stainless steel for the internals and muffler body. Unlike other systems that can use coated aluminum, mild steel, or 409 stainless, the Borla uses true 304 stainless on the inside as well as the outside. This prevents the muffler from rusting and deteriorating from the inside out. Borla guarantees every muffler with a 1,000,000 mile warranty. Turner Motorsport has been the leading Borla dealer for BMW exhausts since we sold our first system in 1996, including using Borla Exhausts on every Turner BMW racecar.

This Borla Exhaust fits the following BMWs:
2015+ F80 BMW M3
2015+ F82 BMW M4
Borla
Part #: 140607
Price: $2761.99 (USD) 
Direct Ship
Free Shipping Free Shipping
Quantity:   
Borla
Part #: 140600
Price: $2929.87 (USD) 
$3291.99 (Sale - Save 11%)
Direct Ship
Free Shipping Free Shipping
Quantity:   
Borla Performance Downpipe - F80/F82 M3/M4

For a true racing car, the biggest restriction in the exhaust system is the catalytic converters. On modern BMWs there are often two sets - a primary in the header/downpipe and a secondary further back in the exhaust. Removing these restrictions with a cat-less downpipe and straight pipes has enormous benefits for a track or race car: remove the restriction which unlocks huge power and torque gains, less heat (which can reduce power output), zero complication from a clogged or blocked catalytic converter, and less weight. These Borla M3/M4 cat-less downpipes are made from stainles steel and have no cats and mandrel-bent pipes for the best flow out the turbos. These will bolt on to the Borla or stock section 1 front pipes. Special software or stand-alone engine management may be required to keep the check engine light and faults from appearing.

Borla is committed to providing world-class exhaust products that exceed customer expectations. To accomplish this, they have a facility complete with a state-of-the art test and development center. Pioneering a variety of improvements in the design of performance exhaust systems, Alex Borla currently holds several US patents for innovative exhaust system technology. Borla has won numerous "Best New Product" awards in the industry. Every Borla Cat-Back™ system, header and axle-back is made from austenitic stainless steel (superior to 409 or aluminized steel) utilizing mandrel-bent tubing, all-welded construction, and is designed for accurate fit and easy installation. Over 30 years experience and special merge collector technology provide the ultimate in power and endurance.

This part alters or deletes the emissions equipment on your car. Removing the primary cats will result in a check engine light and faults for the missing cats. Special software or modules will be required to prevent the codes but this setup will not be street legal. This was designed for race and track use only. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.


This item fits the following BMWs:
2015+ F80 BMW M3 - Sedan
2015+ F82 BMW M4 - Coupe
2015+ F83 BMW M4 - Convertible
Left Hand Drive ONLY

Borla
Part #: 60563KT
Price: $886.44 (USD) 
$996.00 (Sale - Save 11%)
Direct Ship
Free Shipping Free Shipping
Quantity:   
Borla ATAK Catback Exhaust System - F80 M3 F82 M4

Borla's Acoustically Tuned Applied Kinetics (ATAK) exhaust system provides high volume drone or distortion. Borla manages sound waves to produce an exhaust note that is consistent throughout the powerband. With ATAK, the sound output is tuned to focus sound waves for optimum high-volume output. Borla's exclusive ATAK technology produces the highest available dB levels in the Borla street-legal lineup - like most BMW enthusiasts, we prefer to hear our engine over our radios.

Features:

  • Every Borla is made with 304 stainless steel for the internals and muffler body 
  • 3 year warranty on all moving parts - includes active exhaust valves & actuators present in this system.
  • Quad round tips
  • Pipe diameter: 2.5"
  • 8 HP gain
Borla
Part #: 140731
Price: $3355.99 (USD) 
Direct Ship
Quantity:   
Borla Racing Test Pipes (Secondary Cat Delete) - F80 M3, F82 M4

This part alters or deletes the emissions equipment on your car, and may not meet emissions standards in all states. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.

 

Section: straight pipes to replace stock rear catalytic converters.
Installation: clamp-on
These Borla Test Pipes replace the secondary cats on the F80 M3 and F82 M4i with the S55 engine. These are perfect for setting up your own custom exhaust as they bolt on to the stock downpipes with factory-style flanges. At the back of this section is an open pipe that can be used with the Borla cat-back mufflers or with another system of your own design (these are not designed to work with the stock exhaust system). Eliminating any part of the stock emissions equipment means this piece is for off road use only.



Every Borla is made with 304 stainless steel for the internals and muffler body. Unlike other systems that can use coated aluminum, mild steel, or 409 stainless, the Borla uses true 304 stainless on the inside as well as the outside. This prevents the muffler from rusting and deteriorating from the inside out. Borla guarantees every muffler with a 1,000,000 mile warranty. Turner Motorsport has been the leading Borla dealer for BMW exhausts since we sold our first system in 1996, including using Borla Exhausts on every Turner BMW racecar.

 

This is a race exhaust system which uses sport catalyzers designed for maximum flow while still reducing vehicle emissions. This part alters or deletes the emissions equipment on your car, and may not meet emissions standards in all states. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.



This Borla Exhaust fits the following BMWs:
2015+ F80 BMW M3
2015+ F82 BMW M4

Borla
Part #: 60557KT
Price: $539.34 (USD) 
$606.00 (Sale - Save 11%)
Direct Ship
Free Shipping Free Shipping
Quantity: