Fire Extinguishers and Mounts for BMW F83 (2015+) M4

Clear BMW chassis
Fires in track vehicles can happen for several reasons. Prepare for them all with extinguishers and mounts, all listed on this page. Racing regulations almost always include extinguishers mounted inside the cabin. Meeting those standards is crucial to allow you to race and could end up saving your caraEURtms life, or even your own!

H3R Performance HalGuarda,,C/ Clean Agent 2.5lb Fire Extinguisher - Black
H3R Performance - Corporate Logo
T#:402686
Part#: HG250B
In Stock
$224.95
Free Shipping

Track days can come to an abrupt ending when dealing with a vehicle fire. Causes can range from flammable fluids, such as leaking fuel, or overheating electronics and electrical shorts. Regardless of the cause, this can cause thousands of dollars of damage and can potentially become an immediate, life-threatening hazard if not properly handled. The best way to ensure your safety is to have a fire extinguisher on board that is made to put out any fires quickly and efficiently. You must also be certain that it is reliable enough to get the job done in an emergency. H3R Performance builds high quality extinguishers that feature strong steel cylinders, all metal valve construction, and aviation-quality steel mounting brackets all to make certain that this life saving device will function perfectly, without the worries of weak plastic valves or internals.

The HalGuarda,,C/ Clean Agent Extinguisher was specifically designed to combat fires in situations and places that water would only make worse, such as a fuel fire or electrical fires. These extinguishers contain HalotronA(r) 1, an electrically non-conductive "clean" extinguisher that rapidly turns into gas and leaves behind no damaging residue that would need to be cleaned up and is environmentally friendly. Thanks to its liquid to gas evaporation, it can get in to hard to reach areas to properly extinguish any and all fire sources. It has also be extensively tested by the military and FAA for its fire fighting ability and is now the main extinguisher used at airports around the world.

Features:

  • No thermal shock to electronics
  • No mess or damage to vehicle or surfaces
  • Liquefied gas extinguishes hard-to-reach fires
  • Does not impair operator's vision
  • EPA approved
  • Listed and rated 2B:C by Underwriters Laboratories
  • Rechargeable
  • Made in U.S.A.
  • 2-strap mounting bracket
  • 6' - 10' discharge range
  • High quality steel cylinders
  • All metal valve construction
  • Compact, lightweight, easy to use
  • Five year limited warranty

Specifications:

  • Extinguishing Agent -- HalotronA(r) 1
  • Agent (lb.) -- 2.5
  • Gross Weight (lb.) -- 5.4
  • U/L Rating -- 2 B:C
  • Height (inches) -- 14.8
  • Width (inches) -- 5.0
  • Depth-diameter (inches) -- 3.0
Rennline Fire Extinguisher Mount - Quick Disconnect
Rennline - Corporate Logo
T#:555130
Part#: FE12
Direct Ship
$275.00
$275.00
H3R Performance Universal Fire Extinguisher Seat Mount - Black Powder Coated
H3R Performance - Corporate Logo
T#:402753
Part#: SM01BK
Ships in 7 Business Days
$108.95
Free Shipping

H3R Performance is always looking to ensure that their products are as top of the line as possible. To achieve this, all of their parts are made of high quality materials, have been thoroughly tested, and are made in the United States. Thanks to their high quality products and their extreme reliability, H3R has become one of the largest distributors of fire extinguisher equipment for both private markets and directly to air fields and aviation companies across the US.

This lightweight aluminum bracket has been designed by H3R Performance to place the fire extinguisher withing the driver's reach and to accept H3R Performance billet and standard brackets for extinguishers up to 5lbs. Installation is easy and requires no drilling, installing directly to the bottom front of the driver or passenger seat at the seat rail bolts or above the slider.

Features and Specifications:

  • Places extinguisher within driver's reach
  • Accepts H3R Performance billet and standard brackets
  • Easy to install - no drilling required
  • Attaches to seat rail bolts or seat slider*
  • Fully adjustable
  • Accommodates mounting holes 8 7/8" - 19 1/4" apart
  • Lightweight aluminum construction
  • Made in U.S.A.
  • One year limited warranty

H3R Performance MaxOuta,,C/ Dry Chemical 1 lb. Fire Extinguisher - Black
H3R Performance - Corporate Logo
T#:402733
Part#: MX100B
Ships in 7 Business Days
$99.95
Free Shipping on orders $99 and up

Track days can come to an abrupt ending when dealing with a vehicle fire. Causes can range from flammable fluids, such as leaking fuel, or overheating electronics and electrical shorts. Regardless of the cause, this can cause thousands of dollars of damage and can potentially become an immediate, life-threatening hazard if not properly handled. The best way to ensure your safety is to have a fire extinguisher on board that is made to put out any fires quickly and efficiently. You must also be certain that it is reliable enough to get the job done in an emergency. H3R Performance builds high quality extinguishers that feature strong steel cylinders, all metal valve construction, and aviation-quality steel mounting brackets all to make certain that this life saving device will function perfectly, without the worries of weak plastic valves or internals.

The MaxOuta,,C/ Dry Chemical extinguisher is designed to combat fires in situations and places that water would only make worse, such as a fuel fire (Type A) or electrical fires (Type B). Dry chemical agents are good as well for typical fires involving wood, paper, and cloth and plastics (Type A) in extinguishers larger than 1lb, making it useful for marine, home, and auto use. Dry chemical agents work by interrupting the chemical reaction and smothering the combustion process from oxygen and fuel. These chemical powder agents have a long life and are extremely reliable, but for further protection against potential issues, the MaxOuta,,C/ extinguishers also include free-flowing and non-caking agents to ensure that the agent is always ready to use and will properly coat the fire source.

Features:

  • Listed and rated by 1A:10B:C by Underwriters Laboratories
  • US Coast Guard approved with standard bracket (listed on UL label)
  • Rechargeable
  • Made in U.S.A.
  • 2 strap steel mounting bracket
  • 9' - 15' discharge range
  • High quality steel cylinders
  • All metal valve construction
  • Compact, lightweight, easy to use
  • 6 year limited warranty

Specifications:

  • Extinguishing Agent -- Monoammonium phosphate
  • Agent (lb.) -- 2.5 lb
  • Gross Weight (lb.) -- 5.0lb
  • U/L Rating -- 1A:10B:C
  • Height (inches) -- 14.8 in
  • Width (inches) -- 4.5 in
  • Depth-diameter -- 3.0 in

H3R Performance Billet Aluminum Single Clamp Roll Bar Mount - Brushed - 1 3/4"
H3R Performance - Corporate Logo
T#:402924
Part#: BMR02P
Ships in 7 Business Days
$46.95
Free Shipping on orders $99 and up

H3R Performance is always looking to ensure that their products are as top of the line as possible. To achieve this, all of their parts are made of high quality materials, have been thoroughly tested, and are made in the United States. Thanks to their high quality products and their extreme reliability, H3R has become one of the largest distributors of fire extinguisher equipment for both private markets and directly to air fields and aviation companies across the US.

When mounting a fire extinguisher, you must be certain that the mount will keep it secure when not needed but will easily release in an emergency. H3R's Billet Aluminum Mounts are a excellent option to keep everything mounted tight, they can be released in an instant, and look great on top of it all! They consist of two main components, the mount and the clamp. The mount is attached to the vehicle and the clamp is fastened to the fire extinguisher itself. The large tab on the clamp is then inserted into the mount and fastened with a quick-release pin.

This Single Clamp Roll Bar Mount is one of the optional mounts for all H3R Performance 100 series fire extinguishers (all 1lb and 1.4lb models). Make sure to pair this item with a fire extinguisher Band Clamp before checking out. This mount specifically fits 1 3/4" roll bars.

There are two finishes available, a high polished finish and a brushed aluminum finish.

H3R Performance Billet Aluminum Single Clamp Roll Bar Mount - Brushed - 2"
H3R Performance - Corporate Logo
T#:402923
Part#: BMR03B
Ships in 7 Business Days
$53.95
Free Shipping on orders $99 and up

H3R Performance is always looking to ensure that their products are as top of the line as possible. To achieve this, all of their parts are made of high quality materials, have been thoroughly tested, and are made in the United States. Thanks to their high quality products and their extreme reliability, H3R has become one of the largest distributors of fire extinguisher equipment for both private markets and directly to air fields and aviation companies across the US.

When mounting a fire extinguisher, you must be certain that the mount will keep it secure when not needed but will easily release in an emergency. H3R's Billet Aluminum Mounts are a excellent option to keep everything mounted tight, they can be released in an instant, and look great on top of it all! They consist of two main components, the mount and the clamp. The mount is attached to the vehicle and the clamp is fastened to the fire extinguisher itself. The large tab on the clamp is then inserted into the mount and fastened with a quick-release pin.

This Single Clamp Roll Bar Mount is one of the optional mounts for all H3R Performance 100 series fire extinguishers (all 1lb and 1.4lb models). Make sure to pair this item with a fire extinguisher Band Clamp before checking out. This mount specifically fits 2" roll bars.

There are two finishes available, a high polished finish and a brushed aluminum finish.


H3R Performance Billet Aluminum Dual Clamp Roll Bar Mount - Brushed - 2"
H3R Performance - Corporate Logo
T#:402859
Part#: BMR13B
Ships in 7 Business Days
$81.95
Free Shipping on orders $99 and up

H3R Performance is always looking to ensure that their products are as top of the line as possible. To achieve this, all of their parts are made of high quality materials, have been thoroughly tested, and are made in the United States. Thanks to their high quality products and their extreme reliability, H3R has become one of the largest distributors of fire extinguisher equipment for both private markets and directly to air fields and aviation companies across the US.

When mounting a fire extinguisher, you must be certain that the mount will keep it secure when not needed but will easily release in an emergency. H3R's Billet Aluminum Mounts are a excellent option to keep everything mounted tight, they can be released in an instant, and look great on top of it all! They consist of two main components, the mount and the clamp. The mount is attached to the vehicle and the clamp is fastened to the fire extinguisher itself. The large tab on the clamp is then inserted into the mount and fastened with a quick-release pin.

This Dual Clamp Roll Bar Mount is one of the optional mounts for all H3R Performance 250 series fire extinguishers (all 2.5lb models). Make sure to pair this item with a Band Clamp before checking out. This mount specifically fits 2" roll bars.

There are two finishes available, a high polished finish and a brushed aluminum finish.

H3R Performance Billet Aluminum Single Clamp Roll Bar Mount - Polished - 2"
H3R Performance - Corporate Logo
T#:402922
Part#: BMR03P
Ships in 7 Business Days
$54.95
Free Shipping on orders $99 and up

H3R Performance is always looking to ensure that their products are as top of the line as possible. To achieve this, all of their parts are made of high quality materials, have been thoroughly tested, and are made in the United States. Thanks to their high quality products and their extreme reliability, H3R has become one of the largest distributors of fire extinguisher equipment for both private markets and directly to air fields and aviation companies across the US.

When mounting a fire extinguisher, you must be certain that the mount will keep it secure when not needed but will easily release in an emergency. H3R's Billet Aluminum Mounts are a excellent option to keep everything mounted tight, they can be released in an instant, and look great on top of it all! They consist of two main components, the mount and the clamp. The mount is attached to the vehicle and the clamp is fastened to the fire extinguisher itself. The large tab on the clamp is then inserted into the mount and fastened with a quick-release pin.

This Single Clamp Roll Bar Mount is one of the optional mounts for all H3R Performance 100 series fire extinguishers (all 1lb and 1.4lb models). Make sure to pair this item with a fire extinguisher Band Clamp before checking out. This mount specifically fits 2" roll bars.

There are two finishes available, a high polished finish and a brushed aluminum finish.


H3R Performance MaxOuta,,C/ Dry Chemical 5 lb. Fire Extinguisher - Black
H3R Performance - Corporate Logo
T#:402725
Part#: MX500B
Ships in 7 Business Days
$118.95
$118.95

Track days can come to an abrupt ending when dealing with a vehicle fire. Causes can range from flammable fluids, such as leaking fuel, or overheating electronics and electrical shorts. Regardless of the cause, this can cause thousands of dollars of damage and can potentially become an immediate, life-threatening hazard if not properly handled. The best way to ensure your safety is to have a fire extinguisher on board that is made to put out any fires quickly and efficiently. You must also be certain that it is reliable enough to get the job done in an emergency. H3R Performance builds high quality extinguishers that feature strong steel cylinders, all metal valve construction, and aviation-quality steel mounting brackets all to make certain that this life saving device will function perfectly, without the worries of weak plastic valves or internals.

The MaxOuta,,C/ Dry Chemical extinguisher is designed to combat fires in situations and places that water would only make worse, such as a fuel fire (Type A) or electrical fires (Type B). Dry chemical agents are good as well for typical fires involving wood, paper, and cloth and plastics (Type A) in extinguishers larger than 1lb, making it useful for marine, home, and auto use. Dry chemical agents work by interrupting the chemical reaction and smothering the combustion process from oxygen and fuel. These chemical powder agents have a long life and are extremely reliable, but for further protection against potential issues, the MaxOuta,,C/ extinguishers also include free-flowing and non-caking agents to ensure that the agent is always ready to use and will properly coat the fire source.

Features:

  • US Coast Guard Approved (with bracket listed on UL label)
  • Listed and rated by Underwriters Laboratories
  • Rechargeable
  • Made in U.S.A.
  • Steel strap mounting bracket
  • 12' - 18' discharge range
  • High quality steel cylinders
  • All metal valve construction
  • Six year limited warranty

Specifications:

  • Extinguishing Agent -- Monoammonium phosphate
  • Agent (lb.) -- 5.0 lb
  • Gross Weight (lb.) -- 8.8lb
  • U/L Rating -- 3A:40B:C
  • Height (inches) -- 15 in
  • Width (inches) -- 7.25 in
  • Depth-diameter -- 4.3 in
  • USCG Type -- A II, B:C I

H3R Performance Billet Aluminum Dual Clamp Roll Bar Mount - Polished - 1 1/2"
H3R Performance - Corporate Logo
T#:402864
Part#: BMR10P
Ships in 7 Business Days
$84.95
Free Shipping on orders $99 and up

H3R Performance is always looking to ensure that their products are as top of the line as possible. To achieve this, all of their parts are made of high quality materials, have been thoroughly tested, and are made in the United States. Thanks to their high quality products and their extreme reliability, H3R has become one of the largest distributors of fire extinguisher equipment for both private markets and directly to air fields and aviation companies across the US.

When mounting a fire extinguisher, you must be certain that the mount will keep it secure when not needed but will easily release in an emergency. H3R's Billet Aluminum Mounts are a excellent option to keep everything mounted tight, they can be released in an instant, and look great on top of it all! They consist of two main components, the mount and the clamp. The mount is attached to the vehicle and the clamp is fastened to the fire extinguisher itself. The large tab on the clamp is then inserted into the mount and fastened with a quick-release pin.

This Dual Clamp Roll Bar Mount is one of the optional mounts for all H3R Performance 250 series fire extinguishers (all 2.5lb models). Make sure to pair this item with a Band Clamp before checking out. This mount specifically fits 1 1/2" roll bars.

There are two finishes available, a high polished finish and a brushed aluminum finish.

H3R Performance Billet Aluminum Dual Clamp Roll Bar Mount - Polished - 2"
H3R Performance - Corporate Logo
T#:402858
Part#: BMR13P
Ships in 7 Business Days
$84.95
Free Shipping on orders $99 and up

H3R Performance is always looking to ensure that their products are as top of the line as possible. To achieve this, all of their parts are made of high quality materials, have been thoroughly tested, and are made in the United States. Thanks to their high quality products and their extreme reliability, H3R has become one of the largest distributors of fire extinguisher equipment for both private markets and directly to air fields and aviation companies across the US.

When mounting a fire extinguisher, you must be certain that the mount will keep it secure when not needed but will easily release in an emergency. H3R's Billet Aluminum Mounts are a excellent option to keep everything mounted tight, they can be released in an instant, and look great on top of it all! They consist of two main components, the mount and the clamp. The mount is attached to the vehicle and the clamp is fastened to the fire extinguisher itself. The large tab on the clamp is then inserted into the mount and fastened with a quick-release pin.

This Dual Clamp Roll Bar Mount is one of the optional mounts for all H3R Performance 250 series fire extinguishers (all 2.5lb models). Make sure to pair this item with a Band Clamp before checking out. This mount specifically fits 2" roll bars.

There are two finishes available, a high polished finish and a brushed aluminum finish.

H3R Performance HalGuarda,,C/ Clean Agent 5lb Fire Extinguisher - Black
H3R Performance - Corporate Logo
T#:402683
Part#: HG500B
Ships in 7 Business Days
$304.95
Free Shipping on orders $99 and up

Track days can come to an abrupt ending when dealing with a vehicle fire. Causes can range from flammable fluids, such as leaking fuel, or overheating electronics and electrical shorts. Regardless of the cause, this can cause thousands of dollars of damage and can potentially become an immediate, life-threatening hazard if not properly handled. The best way to ensure your safety is to have a fire extinguisher on board that is made to put out any fires quickly and efficiently. You must also be certain that it is reliable enough to get the job done in an emergency. H3R Performance builds high quality extinguishers that feature strong steel cylinders, all metal valve construction, and aviation-quality steel mounting brackets all to make certain that this life saving device will function perfectly, without the worries of weak plastic valves or internals.

The HalGuarda,,C/ Clean Agent Extinguisher was specifically designed to combat fires in situations and places that water would only make worse, such as a fuel fire or electrical fires. These extinguishers contain HalotronA(r) 1, an electrically non-conductive "clean" extinguisher that rapidly turns into gas and leaves behind no damaging residue that would need to be cleaned up and is environmentally friendly. Thanks to its liquid to gas evaporation, it can get in to hard to reach areas to properly extinguish any and all fire sources. It has also be extensively tested by the military and FAA for its fire fighting ability and is now the main extinguisher used at airports around the world.

Features:

  • No thermal shock to electronics
  • No mess or damage to vehicle or surfaces
  • Liquefied gas extinguishes hard-to-reach fires
  • Does not impair operator's vision
  • EPA approved
  • USCG approved
  • Meet DOT requirements for the heavy duty truck market
  • Listed and rated 5B:C by Underwriters Laboratories
  • Rechargeable
  • Made in U.S.A.
  • Steel strap mounting bracket
  • 9' - 15' discharge range
  • High quality steel cylinders
  • All metal valve construction
  • Five year limited warranty

Specifications:

  • Extinguishing Agent -- HalotronA(r) 1
  • Agent (lb.) -- 5.0
  • Gross Weight (lb.) -- 8.8
  • U/L Rating -- 5 B:C
  • Height (inches) -- 15.3
  • Width (inches) -- 6.0
  • Depth-diameter (inches) -- 4.3
  • USCG Type -- B:C I


H3R Performance Extreme Duty Flat Surface Mount - 2.5lb
H3R Performance - Corporate Logo
T#:402779
Part#: NB300
Ships in 7 Business Days
$76.95
$76.95

H3R Performance is always looking to ensure that their products are as top of the line as possible. To achieve this, all of their parts are made of high quality materials, have been thoroughly tested, and are made in the United States. Thanks to their high quality products and their extreme reliability, H3R has become one of the largest distributors of fire extinguisher equipment for both private markets and directly to air fields and aviation companies across the US.

Made specifically to mount an extinguisher to any flat surface of the vehicle, this fiberglass reinforced nylon bracket is made for a quick reliable release that is up to the task of withstanding the rigors that off-road and track conditions will expose this to. With the mount's 3" size, you can easily mount any of the the MX250R/B/C & HG250R/B/C model fire extinguishers from H3R Performance.

Features:

  • Fire extinguisher quickly releases from bracket
  • Fiberglass reinforced nylon construction and corrosion resistant hardware
  • Designed to meet MIL-STD-810G (test in progress)
  • Tested to withstand inertia loads in excess of 27G in all directions
  • Fire extinguisher cannot be accidently disengaged from bracket
  • Pull-to-release flag enhances visibility
  • Does not obscure fire extinguisher nameplate
  • Designed for use with H3R Performance vehicle seat mount
  • Weighs a scant 14 oz!
H3R Performance Band Clamp For 250 Series Fire Extinguishers - Polished Aluminum
H3R Performance - Corporate Logo
T#:402803
Part#: BB250P
Ships in 7 Business Days
$79.95
Free Shipping on orders $99 and up

H3R Performance is always looking to ensure that their products are as top of the line as possible. To achieve this, all of their parts are made of high quality materials, have been thoroughly tested, and are made in the United States. Thanks to their high quality products and their extreme reliability, H3R has become one of the largest distributors of fire extinguisher equipment for both private markets and directly to air fields and aviation companies across the US.

When mounting a fire extinguisher, you must be certain that the mount will keep it secure when not needed but will easily release in an emergency. H3R's Billet Aluminum Mounts are a excellent option to keep everything mounted tight, they can be released in an instant, and look great on top of it all! They consist of two main components, the mount and the clamp. The mount is attached to the vehicle and the clamp is fastened to the fire extinguisher itself. The large tab on the clamp is then inserted into the mount and fastened with a quick-release pin.

This Band Clamp is the needed clamp for all H3R Performance 250 series fire extinguishers, including the 2.5lb MX250R/C/B/M/E & HG250R/C/B models. Make sure to pair this item with either the Billet Flat Surface Mount or the Single Band Clamp Mount.

There are two finishes available, a high polished finish and a brushed aluminum finish.

H3R Performance Extreme Duty 2.5lb Roll Bar Mount - 1 5/8"
H3R Performance - Corporate Logo
T#:402777
Part#: NBR301
Ships in 7 Business Days
$96.95
$96.95

H3R Performance is always looking to ensure that their products are as top of the line as possible. To achieve this, all of their parts are made of high quality materials, have been thoroughly tested, and are made in the United States. Thanks to their high quality products and their extreme reliability, H3R has become one of the largest distributors of fire extinguisher equipment for both private markets and directly to air fields and aviation companies across the US.

Made specifically to mount an extinguisher to a roll bar or roll cage, this fiberglass reinforced nylon bracket is made for a quick reliable release that is up to the task of withstanding the rigors that off-road and track conditions will expose this to. If your vehicle is equipped with a 1 5/8" roll bar or cage, you can easily mount any of the the MX250R/B/C & HG250R/B/C model fire extinguishers from H3R Performance.

Features:

  • Fire extinguisher quickly releases from bracket
  • Fiberglass reinforced nylon construction and corrosion resistant hardware
  • Designed to meet MIL-STD-810G (test in progress)
  • Tested to withstand inertial loads in excess of 27G in all directions
  • Fire extinguisher cannot be accidently disengaged from bracket
  • Pull-to-release flag enhances visibility
  • Does not obscure fire extinguisher nameplate

H3R Performance Billet Aluminum Single Clamp Roll Bar Mount - Polished - 1 1/2"
H3R Performance - Corporate Logo
T#:402928
Part#: BMR00P
Ships in 7 Business Days
$46.95
$46.95

H3R Performance is always looking to ensure that their products are as top of the line as possible. To achieve this, all of their parts are made of high quality materials, have been thoroughly tested, and are made in the United States. Thanks to their high quality products and their extreme reliability, H3R has become one of the largest distributors of fire extinguisher equipment for both private markets and directly to air fields and aviation companies across the US.

When mounting a fire extinguisher, you must be certain that the mount will keep it secure when not needed but will easily release in an emergency. H3R's Billet Aluminum Mounts are a excellent option to keep everything mounted tight, they can be released in an instant, and look great on top of it all! They consist of two main components, the mount and the clamp. The mount is attached to the vehicle and the clamp is fastened to the fire extinguisher itself. The large tab on the clamp is then inserted into the mount and fastened with a quick-release pin.

This Single Clamp Roll Bar Mount is one of the optional mounts for all H3R Performance 100 series fire extinguishers (all 1lb and 1.4lb models). Make sure to pair this item with a fire extinguisher Band Clamp before checking out. This mount specifically fits 1 1/2" roll bars.

There are two finishes available, a high polished finish and a brushed aluminum finish.


H3R Performance Billet Aluminum Single Clamp Roll Bar Mount - Brushed - 2 1/4"
H3R Performance - Corporate Logo
T#:402921
Part#: BMR04B
Ships in 7 Business Days
$53