click to Chat Live
Contact YouTube Blog Twitter facebook Turner Motorsport on Instagram
1-800-280-6966
 |   Login
  • 0
 |   Login
Shopping Cart (0) Wishlist
Contact

(0) item(s) in your Shopping Cart
Home
Categories
Specials Gifts & Clothing
  1. Genuine BMW Accessories
  2. Genuine BMW Clothing
  3. Turner Shirts Hats and Gear
  4. Gifts under $25
  5. Gifts under $50
  6. Gifts under $100
  7. Gifts over $100
  8. Gift Certificates
  9. Stocking Stuffers
  10. Gift Packages
Brakes
  1. Brake Overhaul Packages
  2. Brake Pads
  3. Brake Pad Sensors
  4. Brake Rotors
  5. Brake Fluid
  6. Brake Calipers
  7. Caliper Rebuild Kits
  8. Parking Brake Parts
  9. Brake Master Cylinders
  10. ABS/DSC System Parts
  11. Brake Cooling Ducts & Backing Plates
  12. Brake Pads - Brembo GT BBK Calipers
  13. Brake Pads - StopTech BBK Calipers
Car Care & Accessories
  1. Car Covers
  2. Wheel & Tire Cleaning
  3. Wax, Polish and Cleaning Supplies
  4. Detailing Gear
  5. Leather & Plastic Care
  6. Car Cleaning Supplies
  7. Chassis Paint, Coatings, Sealants, and Rust Conversion
Drivetrain
  1. Differential and Gearing Upgrades
  2. Differential Mounts and Upgrades
  3. OEM Clutch Kits & Clutch Parts
  4. Performance Clutch Kits & Parts
  5. Stock OEM Dual Mass Flywheels
  6. Stainless Steel Clutch Lines
  7. Clutch Parts
  8. Axle Shafts
  9. Driveshafts
  10. Performance Short Shift Kits
  11. Drivershaft Center Support Bearings
  12. Flex Discs & Guibos
  13. Transmission Mounts
  14. Transmission Parts
Engine Chips
  1. Shark Injector Performance Software, 1996-2005 Models
  2. Sprint Booster Drive-by-Wire Module
Engine Parts
  1. Cam Sprockets & Gears
  2. Water Pumps
  3. Thermostats
  4. Radiators & Cooling System Overhaul Kits
  5. Radiator Hoses, Cooling Hoses, & Hose Sets
  6. Schrick Performance Camshafts
  7. External Engine Parts
  8. Drive Belts & V-Belts
  9. Gaskets, Gasket Sets, Seals, & O-Rings
  10. Crankcase Vent, PCV, and Oil Separator Systems
  11. Motor Mounts
  12. Electrical Sensors, Switches, & Relays
  13. Ignition Parts
  14. Alternator & Alternator Parts
  15. Starter Motors & Starter Parts
  16. Fuel System Parts
  17. Internal Engine Parts
  18. Cylinder Head Parts & Head Bolts
  19. VANOS Units & Parts
  20. Oil Coolers & Oil Cooler Parts
Exhaust
  1. Supersprint Performance Exhaust Systems
  2. Oxygen Sensor - O2 Sensors
  3. Exhaust Gaskets Hangers and Parts
Exterior / Body
  1. Emblems & Decals for Hood, Trunk, and Wheels
  2. Front Spoilers, Bumper Covers, & Air Dams
  3. Body Trim Parts & Accessories
  4. License Plate Brackets & License Plate Frames
  5. Window Regulators & Motors
  6. Wiper Blades, Wiper Pumps, & Wiper Motor Parts
  7. Hood Pins and AeroCatch Latches
  8. Racing Tow Hooks and Tow Straps
Intake
  1. aFe Cold-Air Intake Kits
  2. Turbos & Active Autowerke Superchargers
  3. Performance Intake Kits
  4. aFe Performance Air Filters
  5. K&N Performance Air Filters
  6. Intake Cleaning & Recharging Kits
  7. Intake Manifold Upgrades
  8. Intake Manifold Components (DISA, Vacuum, CCV, Etc)
  9. Mass Air Sensor & Air Flow Meters
  10. Intake Boots & Hoses
  11. Throttle Body Parts
  12. Other Intake Kits
Interior
  1. Floor Mats
  2. Gauge Kits and Data Acquisition
  3. Auxiliary Input Adaptors for BMW
  4. Pedal Sets
  5. Escort Radar Detectors
  6. Factory Steering Wheels
  7. Racing Steering Wheels
  8. Shift Knobs, Shift Boots, & Shift Handles
  9. Seats & Seat Accessories
  10. Seat Belts and Racing Harnesses
  11. Heating & Air Conditioning
  12. Interior Switches and Switchgear
  13. Sunshades & Windscreens
  14. Interior Trim & Accessories
Lighting
  1. Angel Eye Headlight Conversions
  2. Bulbs for Headlights, Turn Signals and Tail Lights
  3. Headlights, Headlight Lenses, & Headlight Parts
  4. Fog Lights, Fog Light Lenses, & Fog Light Parts
  5. Tail Lights
  6. Stealth Bulbs
Maintenance
  1. Routine Maintenance & Tune-Up Packages
  2. Oil Filters & Oil Filter Kits
  3. Air Filters
  4. Fuel Filters
  5. Cabin Air Filters, Heppa Filters, & Microfilters
  6. Transmission Filter Kits & Transmission Service Parts
  7. Ignition Coils
  8. Spark Plugs
  9. Bentley Repair / Service Manuals
  10. Service Reset Tools & Fault Code Readers
  11. Anti-Freeze and Coolant
  12. Engine Oils - Genuine BMW and OEM
  13. Power Steering and Hydraulic Fluids
  14. Transmission and Gear Oil - Genuine BMW and OEM
  15. MOTUL Engine Oil and Gear Lubricants
  16. Red Line Oil & Fluids
  17. Liqui-Moly Oil and Additives
Suspension
  1. Shocks & Struts
  2. H&R Performance Springs
  3. Bilstein PSS PSS9 PSS10 Coil Over Suspensions
  4. H&R Coil Over Suspensions
  5. KW Coil Over Suspensions
  6. Chassis Reinforcement Kits & Parts
  7. Sway Bar Links & Sway Bar Parts
  8. Control Arm Replacements & Upgrades
  9. Suspension Bushings & Mounts
  10. Wheel Bearings & Hub Assemblies
  11. Steering Racks & Power Steering Pumps
  12. Tie Rods & Steering Parts
  13. Coil Over Spring Hardware
Wheels
  1. Apex Flow Formed Alloy Wheels
  2. Forgeline Custom Forged Alloy Wheels
  3. Turner Motorsport Wheel Spacers
  4. ECS Tuning Wheel Spacers
  5. H&R Wheel Spacers
  6. Wheel Bolts, Wheel Studs and Nuts
  7. Wheel Emblems, Caps, and Accessories
Tools
  1. Alignment Tools
  2. Battery Chargers and Tenders
  3. Brake Tools
  4. Clutch Alignment Tools
  5. Coil Over Wrenches
  6. Cooling System Tools
  7. Cylinder Head and VANOS Tools
  8. Exhaust Tools
  9. Fan and Fan Clutch Tools
  10. Fault Code Readers and OBD Scan Tools
  11. Fuel System Tools
  12. Genuine BMW Tool Kits
  13. Oil Service Tools
  14. Sockets
  15. Spark Plug Sockets
  16. Transmission and Differential Tools
  17. Wheel Pin Tools
  18. Workshop Chemicals
Clearance
Choose BMW
BMW 1 Series
  1. (E82) 1-series Coupe 2008+
  2. (E88) 1-series Convertible 2008+
BMW 2 Series
  1. (F22) 2-Series Coupe 2014+
  2. (F23) 2-Series Convertible 2014+
  3. (F87) M2 2016+
BMW 3 Series
  1. (E21) 3-Series 1977-1983
  2. (E30) 3-series 1984-1991
  3. (E30) M3 1988-1991
  4. (E36) 3-series 1992-1999
  5. (E36) M3 1995-1999
  6. (E46) 3-Series 1999-2005
  7. (E46) M3 2001-2006
  8. (E90) 3-Series Sedan 2006-2011
  9. (E90) M3 Sedan 2008-2013
  10. (E91) 3-Series Touring 2006-2013
  11. (E92) 3-Series Coupe 2007-2013
  12. (E92) M3 Coupe 2008-2013
  13. (E93) 3-Series Convertible 2007-2013
  14. (E93) M3 Convertible 2008-2013
  15. (F30) 3-Series Sedan 2012+
  16. (F31) 3-Series Touring 2014+
  17. (F80) M3 2015+
  18. (F34) 3-Series Gran Turismo 2014+
BMW 4 Series
  1. (F32) 4-Series Coupe 2014+
  2. (F33) 4-Series Convertible 2015+
  3. (F34) 4-Series Gran Turismo 2014+
  4. (F82) M4 Coupe 2015+
  5. (F83) M4 Convertible 2015+
  6. (F36) 4-Series Gran Coupe 2015+
BMW 5 Series
  1. (E34) M5 1991-1993
  2. (E39) M5 2000-2003
  3. (E60) M5 2006-2010
  4. (E28) 5-Series 1982-1988
  5. (E34) 5-Series 1989-1995
  6. (E39) 5-Series 1996-2003
  7. (E60) 5-Series Sedan 2004-2010
  8. (E61) 5-Series Touring 2006-2010
  9. (F10) 5-Series 2011+
  10. (G30) 5-Series 2017+
BMW 6 Series
  1. (E24) 6-Series 1977-1989
  2. (E63) 6-Series Coupe 2004-2010
  3. (E64) 6-Series Convertible 2004-2010
  4. (F06) 6-Series Gran Coupe 2013+
  5. (F12) 6-Series Coupe 2011+
  6. (F13) 6-Series Convertible 2011+
BMW 7 Series
  1. (E32) 7-Series 1988-1994
  2. (E38) 7-Series 1995-2001
  3. (E65) 7-Series SWB 2002-2007
  4. (E66) 7-Series LWB 2002-2007
  5. (F01) 7-Series SWB 2009+
  6. (F02) 7-Series LWB 2009+
BMW 8 Series BMW Classics (E9, Bavaria, Isetta, etc)
  1. 2500
  2. 2800
  3. 3.0Si
  4. Bavaria
  5. 2800CS
  6. 3.0CS
  7. 2002
  8. 2002tii
  9. (E12) 528i 1977-1981
  10. (E12) 530i 1975-1978
BMW X Series (SAV)
  1. (E84) X1 Series 2013+
  2. (E83) X3 2004-2010
  3. (F25) X3 2011+
  4. (F26) X4 2015+
  5. (E53) X5 2000-2006
  6. (E70) X5 2007-2013
  7. (F15) X5 2014+
  8. (F85) X5 M 2015+
  9. (E71) X6 2008+
  10. (F16) X6 2015+
  11. (F86) X6 M 2015+
  12. (F48) X1 2016+
  13. (F48) X1 (2016+)
BMW Z Series
  1. (E36/7) Z3 1997-2002
  2. (E85) Z4 M Roadster
  3. (E85/E86/E89) Z4 2003+
  4. (E86) Z4 M Coupe
  5. (E52) Z8 2000-2003
BMW 1600-2002 / tii BMW i Series
  1. (I01) BMW i3 2014+
  2. (I12) BMW i8 2014+
MINI Cooper and Cooper S
Racing
Racing Home Racing News Racing Schedule Racing Photo Gallery
Gallery
Photo Gallery Wallpaper Project Cars
  1. Project i8
  2. Project F80 M3
  3. Turner F82 M4
  4. Turner X5 M
  5. Turner F22 2 Series
  6. Turner F13 M6
  7. Turner F10 M5
  8. Turner F30 335i
  9. Turner E9X M3
  10. Turner E92 335i
  11. Turner E82 1 Series
  12. Turner ActiveE (100% Electric)
  13. Turner E46 M3
  14. Turner E46 330i ZHP
  15. Turner E36 M3
  16. Turner E30 M3
  17. Turner MINI Cooper S
  18. McLaren F1
  19. Turner E92 M3 Lime Rock
  20. Turner F80 M3 Silverstone
Video Gallery
Projects
Turner BMW i8 Turner BMW F80 M3 Turner BMW F82 M4 Turner BMW X5 M Turner BMW F22 2 Series Turner BMW F13 M6 Turner BMW F10 M5 Turner BMW F30 335i Turner BMW E9X M3 Turner BMW E92 335i Turner BMW E82 1 Series Turner BMW ActiveE (100% Electric) Turner BMW E46 M3 Turner BMW E46 330i ZHP Turner BMW E36 M3 Turner BMW E30 M3 Turner MINI Cooper S McLaren F1 Turner BMW E92 M3 Lime Rock Turner BMW F80 M3 Silverstone
About Us
About Turner Motorsport Customer Feedback The Turner Team
  1. Open Positions
Returns Policy Shipping Info Contact Us Privacy Policy Security Policy FAQs

BMW X3 Crankcase Vent, PCV, and Oil Separator Systems

BMW X3 Crankcase Vent, PCV, and Oil Separator Systems Every car has a crankcase vent system that is supposed to suppress oil from making it into the intake ports and combustion chamber. A good functioning system will separate oil from the atmosphere and return it to the oil pan (or collect it in a catch can) while allowing the leftover vapors to burn in the combustion chamber or recirculate through the system. This has always been known as a PCV system (Positive Crankcase Ventilation) but BMW has several other names for it - oil separator, crankcase vent (CCV), and cyclonic separator. Failures in the system will allow raw oil to enter the intake and eventually into the engine itself which can have disastrous effects on engine performance and longevity. As emissions regulations on oil and gas venting have gotten more stringent the PCV systems have gotten more complex and failure prone. And because the CCV is intertwined with other systems you could have rough running, loss of power, higher oil consumption, misfiring, stalling, or other annoying issues. There is no replacement interval for these so we recommend inspecting your crankcase vent system as part of your regular maintenance routines. Symptoms of a bad crankcase vent are: whitish or yellowish film on the underside of the oil cap, whistling/squealing noises (not caused by a belt), suction on the oil cap that makes it hard to unscrew, large amounts of white smoke from the exhaust, and excessive oil consumption.
You're currently viewing parts for your (E83) X3 2004-2010. Reset your chassis
For accurate results, specify your model below.
Hose - From Oil Separator to Oil Dipstick Tube - E46 E39 This is the updated hose that goes from the Crankcase Oil Separator Valve to the oil dipstick tube. This tube tends to get plugged with oil sludge and becomes brittle and cracks. It fits E46 323i 323ci 325i (M54) 325ci (M54) 325xi 328i 328ci 330i 330ci 330xi - E39 525i 530i - E60 525i 530i 2004-2005 - X3 2.5i 3.0i 2004-2006 - Z3 2.5i 3.0i - Z4 2.5i 3.0i 2003-2006.

This item fits the following BMWs:
2001-2005 E46 BMW 325i 325ci 325xi Only for cars with M54 engine
1999-2005 E46 BMW 323i 323ci 328i 328ci 330i 330ci 330xi
2001-2003 E39 BMW 525i 530i
2004-2005 E60 BMW 525i 525xi 530i 530xi
2004-2006 E83 BMW X3 2.5i X3 3.0i
2001-2002 Z3 BMW Z3 2.5i Z3 3.0i
2003-2005 Z4 BMW Z4 2.5i Z4 3.0i
Part #: 11157532629
Price: $19.95 (USD) 
Quantity:   
Crankcase Ventilation Dipstick Hose

This tube runs from the oil separator to the lower dipstick tube.

 

BMW has an ongoing issue with oil separators freezing in cold weather if driving is done before the vehicle is fully warmed up. There is often a howling noise followed by numerous oil leaks. The crankcase breather valve is used to purge the oil vapor from the engine block into the valve cover. However, sometimes condensation can cause it to freeze, causing the entire oil separator system to fail, crack, and disintegrate.

Replace this and all the other components of the oil separator system to prevent damage to all the aspects of your engine. As long as you have everything off, you can rest assured that new parts will last and be reliable.

Part #: 11157532629
Price: $8.09 (USD) 
Quantity:   
Complete Turner Baffled Oil Catch Can Kit - Standard Flow 8oz

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain system comes complete with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

Features:

  • 6061-T6 billet machined body, anodized black for lasting protection and appearance
  • Strategically positioned 4 chamber baffle system maximizes oil / air separation 
  • Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
  • Sealed with a pre-installed viton O-Ring
  • Includes 2.5mm allen key to remove baffle plates for cleaning
  • Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
  • Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
  • Optional use drain hole - drain kit included!
  • Universal mounting kit
Part #: 022798tms01-07KT
Price: $189.95 (USD) 
Quantity:   
Crankcase Oil Separator Repair Kit - E83 X3 2.5i 3.0i 2004-2006 This Crankcase Vent / Oil Separator Repair Kit includes the updated oil separator valve, oil dipstick guide tube and hoses. This kit fits E83 X3 2.5i X3 3.0i 2004-2006.

This item fits the following BMWs:
2004-2006 E83 BMW X3 2.5i X3 3.0i
Part #: 11617533400-E83
Price: $357.70 (USD) 
Free Shipping Free Shipping
Quantity:   
Turner Build Your Own Catch Can Kit

There are a few reason having a catch can is an upgrade for a vehicle, from a separator system that no longer works to one that was never there. Modern day emissions regulations require the use of a closed crankcase ventilation (PCV) system to recirculate combustion blow-by gases from the crankcase back in to the intake to be burned.  Unfortunately, these blow by gases contain water vapor (which is a byproduct of combustion) and pick up oil mist from and the windage cloud and cam lubrication system as they travel through the crank case.  Due to less than 100% effective air/oil separation in the stock PCV system, some oil mist and water vapor gets carried back to the intake tract and over time cause oil deposits and carbon buildup in the intake manifold, intake ports, and on the back of intake valves.  All will eventually lead to poor performance and reduced fuel economy, and the presence oil mist can in the intake charge even increase the risk of engine damaging detonation. 

 The catch can utilizes a strategically designed 4 chamber baffle plate system engineered to create multiple changes in the direction of airflow to cause oil droplets to fall out of suspension, maximizing the efficiency of the PCV air/oil separation.  A dipstick is integrated into the cap so you can monitor the oil level, and the can is easily serviced.  At each oil change simply unscrew the canister and empty the trapped oil with your regular used oil.  The Turner Motorsport Oil Catch Can is CNC machined from billet 6061-T6 aluminum and with a stealthy black anodized finish for lasting durability and appearance, and includes everything needed for an OEM-like fully reversible installation. Another feature the Turner catch can has is the ability to add on a drain kit so you no longer have to fumble around getting the fill can out of a tight space. The drain can be run down to the belly pan of your car so draining can be done at the same time you change your oil or anytime in between.

* The baffle system is designed to direct the flow clock-wise or counter clock-wise depending on your setup (each can can be adjusted to flow in either direction). 

Features:

  • 6061-T6 billet machined body, anodized black for lasting protection and appearance
  • Strategically positioned 4 chamber baffle system maximizes oil / air separation 
  • Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
  • Sealed with a pre-installed viton O-Ring
  • Includes 2.5mm allen key to remove baffle plates for cleaning
  • Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
  • Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
  • Optional use drain hole - drain kit included!
  • Universal mounting kit

Specific model kits for N54 vehicles can be found here.

Specific model kits for S54 vehicles can be found here.

Part #: 022798TMS
Price: $189.95 (USD) 
Complete Turner Baffled Oil Catch Can Kit - Standard Flow 6oz

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain system comes complete with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

Features:

  • 6061-T6 billet machined body, anodized black for lasting protection and appearance
  • Strategically positioned 4 chamber baffle system maximizes oil / air separation 
  • Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
  • Sealed with a pre-installed viton O-Ring
  • Includes 2.5mm allen key to remove baffle plates for cleaning
  • Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
  • Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
  • Optional use drain hole - drain kit included!
  • Universal mounting kit
Part #: 022798tms01-05KT
Price: $189.95 (USD) 
Quantity:   
Part #: 11618638014
Price: $72.53 (USD) 
$92.32 (21% off MSRP)
Quantity:   
Complete Turner Baffled Oil Catch Can Kit - Reverse Flow 6oz

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain system comes complete with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

Features:

  • 6061-T6 billet machined body, anodized black for lasting protection and appearance
  • Strategically positioned 4 chamber baffle system maximizes oil / air separation 
  • Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
  • Sealed with a pre-installed viton O-Ring
  • Includes 2.5mm allen key to remove baffle plates for cleaning
  • Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
  • Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
  • Optional use drain hole - drain kit included!
  • Universal mounting kit
Part #: 022798tms01-06KT
Price: $189.95 (USD) 
Quantity:   
Complete Turner Baffled Oil Catch Can Kit - Reverse Flow 8oz

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain system comes complete with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

Features:

  • 6061-T6 billet machined body, anodized black for lasting protection and appearance
  • Strategically positioned 4 chamber baffle system maximizes oil / air separation 
  • Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
  • Sealed with a pre-installed viton O-Ring
  • Includes 2.5mm allen key to remove baffle plates for cleaning
  • Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
  • Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
  • Optional use drain hole - drain kit included!
  • Universal mounting kit
Part #: 022798tms01-08KT
Price: $189.95 (USD) 
Quantity:   
Crankcase Vent Hose - From Valve Cover to Oil Separator  - E46 E39 E60 X3 X5 Z3 Z4 This Crankcase Vent Hose - From Valve Cover to Oil Separator fits BMWs with the M52 or M54 6 cylinder engine including E46 323i 325i 328i 330i E39 525i 528i 530i E60 525i 530i X3 2.5i 3.0i X5 3.0i Z3 2.5 2.8 3.0i Z4 2.5i 3.0i.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 328i 328ci 330i 330ci 330xi
1999-2005 E46 BMW 325i 325ci 325xi - only with M54 engine
1999-2003 E39 BMW 528i 528i 530i
2004-2005 E60 BMW 525i 525xi 530i 530xi
2004-2006 E83 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
1999-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8i Z3 3.0i
2003-2006 E85 BMW Z4 2.5i Z4 3.0i
Part #: 11611432559
Price: $21.95 (USD) 
Quantity:   
Crankcase Vent Return Hose - E46 E39 E60 Z3 This is the BMW crankcase return line that goes from the intake manifold to the top CCV connecting hose. We also offer a complete CCV repair kit

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
1997-2003 E39 BMW 525i 528i 530i
2004-2010 E60 BMW 525i 530i
2004-2005 E83 BMW X3 2.5i X3 3.0i X3 3.0si
2000-2006 E53 BMW X5 3.0i
1/2000-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
2003-2005 E85 BMW Z4 2.5i Z4 3.0i
Part #: 11617504536
Price: $23.95 (USD) 
Quantity:   
Complete Turner Baffled Oil Catch Can Kit - Standard Flow 10oz

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain system comes complete with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

Features:

  • 6061-T6 billet machined body, anodized black for lasting protection and appearance
  • Strategically positioned 4 chamber baffle system maximizes oil / air separation 
  • Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
  • Sealed with a pre-installed viton O-Ring
  • Includes 2.5mm allen key to remove baffle plates for cleaning
  • Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
  • Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
  • Optional use drain hole - drain kit included!
  • Universal mounting kit
Part #: 022798tms01-09KT
Price: $189.95 (USD) 
Quantity:   
Complete Turner Baffled Oil Catch Can Kit - Reverse Flow 10oz

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain system comes complete with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

Features:

  • 6061-T6 billet machined body, anodized black for lasting protection and appearance
  • Strategically positioned 4 chamber baffle system maximizes oil / air separation 
  • Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
  • Sealed with a pre-installed viton O-Ring
  • Includes 2.5mm allen key to remove baffle plates for cleaning
  • Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
  • Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
  • Optional use drain hole - drain kit included!
  • Universal mounting kit
Part #: 022798tms01-10KT
Price: $189.95 (USD) 
Quantity:   
Turner Motorsport Reverse Flow 6oz Baffled Catch Can

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain hole can be used with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

Features:

  • 6061-T6 billet machined body, anodized black for lasting protection and appearance
  • Strategically positioned 4 chamber baffle system maximizes oil / air separation 
  • Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
  • Sealed with a pre-installed viton O-Ring
  • Includes 2.5mm allen key to remove baffle plates for cleaning
  • Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
  • Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
  • Optional use drain hole (valve and hose sold separately, watch for our model specific drain kits!)
Part #: 022798TMS01-04
Price: $139.95 (USD) 
Free Shipping Free Shipping
Quantity:   
Crankcase Oil Separator Valve - E46 E39 E60 X3 X5 Z3 Z4 This Crankcase Oil Separator Valve fits BMWs with the M52tu or M54 6 cylinder engine including E46 323i 325i 328i 330i E39 525i 528i 530i E60 525i 530i X3 2.5i 3.0i X5 3.0i Z3 2.5 2.8 3.0i Z4 2.5i 3.0i. It is fairly common for this valve to become plugged with sludge which can create rough idle and excessive oil consumption.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 328i 328ci 330i 330ci 330xi
1999-2005 E46 BMW 325i 325ci 325xi - only with M54 engine
1999-2003 E39 BMW 525i 528i 530i
2004-2005 E60 BMW 525i 525xi 530i 530xi
2004-2006 E83 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
1999-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8i Z3 3.0i
2003-2006 E85 BMW Z4 2.5i Z4 3.0i
Part #: 11617501566
Price: $48.95 (USD) 
Quantity:   
Turner Catch Can drain system

When installing a catch can on your car, having enough space for maintenance can become an issue. This is why we developed a catch can with a bottom drain option, using this kit you can position the drain at the top or bottom of the vehicle for your convenience. Mounting the valve at the bottom of the car allows for you to empty the catch can easily during an oil change without having to move around too much. 

Contains:

  • 1 - Plastic drain valve
  • 1 - 90 degree barbed fitting
  • 1 - Straight barbed fitting
  • 1 - 3' section of hose
  • 2 - Hose clamps
Part #: 022798TMS16KT
Price: $19.95 (USD) 
Quantity:   
Get notified about money saving
specials & deals for your BMW
enter your email address
  • 22 years of BMW Tuning.
  • Award winning service.
  • 10,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook




    • 1-800-280-6966
      Mon-Thur 9am-6pm ET, Fri 9am-5pm ET

      • © TurnerMotorsport.com 1993-2017. All Rights Reserved.