Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.
Search Filters
Select a chassis to narrow your results:
Or
For accurate results, specify your model below.
Search Criteria
Sort by: Items per page:
Product Results
Select a vehicle to narrow your results.
P3Cars N20/N55 Boost Tap
P3 Gauges
Part Number: P3BTAP1

Upgrade your boost monitoring by adding an analog boost gauge so you can easily tell when there are performance issue's or showing you the power your car is putting out. 
Qty
$60.00
In Stock
Add to Wish List
P3Cars Vent Integrated Data Display and Boost Gauge - F80 M3, F82 M4
P3 Gauges
Part Number: P3-F8X-GAUGE-R

As on our Project F80 M3
Multi-Informational Display Blended With Your Factory Dash Vent!

  • Data Display and Recorder
  • Fault Code Reader and Clearing
  • OEM Appearance and Fitment
  • Plug & Go Install!

The P3Cars Vent Integrated Digital Interface (vidi) is the data display you've always wanted. It simply plugs in to the OBD communication port - no modifications or re-wiring needed at all! Pop out your stock air vent, run the data cables through the dash, reinstall the vent with the new display and you're done! The P3 gauge reads and interprets data available from the OBD port and displays it in realtime. Data that was previously only available with advanced factory diagnostic tools is now literally at your fingertips. On newer models BMW took away gauges and information displays and now you can get that information back! Use the data stream to evaluate your engine performance, acceleration and braking improvements from modifications, cooling system performance, battery condition, and more. Use the data to spot signs of trouble before it's too late. You can record and play back 15 seconds of data for analysis. It also works as a diagnostic trouble code display and has a clear function for resetting the codes. Auxiliary inputs also included so you can read actual boost on supercharged or turbo engines (t-connector and vacuum line included). This makes it the perfect companion to JB or other piggyback modules so you can display the actual boost instead of reading the incorrect value from the OBD port.

The whole kit is installed in the original left-side air vent housing. You can order it two ways - the basic display for a DIY install in your original vent (easy!) or pre-installed in a new OE BMW vent (easier!). Wit the cables and hardware tucked away behind the dash there is no trace of the P3 gauge's aftermarket installation. It's so well-integrated that it looks like a factory BMW part! It's color-matched to your existing gauges and has a dimmer feature. The entire kit is totally reversible. The P3 uses the car's existing OBD communication port, which is the same one used by dealerships, shops, and state inspection stations so just unplug the connector when access to the OBD port is required.

Analog Features.  The P3 gauge is equipped with three analog inputs which allows you to add other sensors and more data. For instance, if you wanted to display Air/Fuel readings you can use an analog line to your AFR wideband sensor in the exhaust. Or fluid temps from the transmission, differential, etc. You can also read before/after intercooler temps or just about anything else you can imagine. The P3 gauge becomes your own custom dash just like a race car. Additional parts and gauge configuration will be required when using any analog inputs. The P3 wiring works with any analog 0-5V sensor which is the standard among universal sensors.

30-day Money Back Guarantee  - if you're not in love with the P3 gauge like we are, send it back for a full refund (less shipping costs)
One year warranty  - covers you from defects for one year

For further information, visit our P3 Gauge page.

Data Displays

Intake Air Temp

Exhaust Gas Temp

Coolant Temp

Boost/Vacuum

Ignition Timing

Throttle Opening

Uncorrected Speed

Uncorrected RPM

Programmable Shift Light

Battery Voltage

0-60, 0-100 Timing

60-0, 100-0 Timing


P3 Gauge Demo:


The P3 Gauge In Action:


This item fits the following BMWs:
2015+ F80 BMW  M3
2015+ F82 BMW  M4
2015+ F83 BMW  M4 Convertible

 

 

Qty
Starting At $389.00
Ships from Supplier - Aug 21, 2018
Free Shipping Free Shipping
Add to Wish List
P3Cars Vent Integrated Data Display and Boost Gauge - E9X 328i, 335i, M3 2008-2013
P3 Gauges
Part Number: P3-E9X-GAUGE-08

As Used on our Project Lime Rock E92 M3
Multi-Informational Display Blended With Your Factory Dash Vent!

  • Data Display and Recorder
  • Diagnostic Fault Code Display and Clearing
  • OEM Appearance and Fitment
  • Plug & Go Install!

The P3Cars Vent Integrated Digital Interface (vidi) is the data display you've always wanted. It simply plugs in to the OBD communication port - no modifications or re-wiring needed at all! Pop out your stock air vent, run the data cables through the dash, reinstall the vent with the new display and you're done! The P3 gauge reads and interprets data available from the OBD port and displays it in realtime. Data that was previously only available with advanced factory diagnostic tools is now literally at your fingertips. On newer models BMW took away gauges and information displays and now you can get that information back! Use the data stream to evaluate your engine performance, acceleration and braking improvements from modifications, cooling system performance, battery condition, and more. Use the data to spot signs of trouble before it's too late. You can record and play back 15 seconds of data for analysis. It also works as a diagnostic trouble code display and has a clear function for resetting the codes. Auxiliary inputs also included so you can read actual boost on supercharged or turbo engines (t-connector and vacuum line included). This makes it the perfect companion to JB or other piggyback modules so you can display the actual boost instead of reading the incorrect value from the OBD port.

The whole kit is installed in the original left-side air vent housing. You can order it two ways - the basic display for a DIY install in your original vent (easy!) or pre-installed in a new OE BMW vent (easier!). Wit the cables and hardware tucked away behind the dash there is no trace of the P3 gauge's aftermarket installation. It's so well-integrated that it looks like a factory BMW part! It's color-matched to your existing gauges and has a dimmer feature. The entire kit is totally reversible. The P3 uses the car's existing OBD communication port, which is the same one used by dealerships, shops, and state inspection stations so just unplug the connector when access to the OBD port is required.

Analog Features.  The P3 gauge is equipped with three analog inputs which allows you to add other sensors and more data. For instance, if you wanted to display Air/Fuel readings you can use an analog line to your AFR wideband sensor in the exhaust. Or fluid temps from the transmission, differential, etc. You can also read before/after intercooler temps or just about anything else you can imagine. The P3 gauge becomes your own custom dash just like a race car. Additional parts and gauge configuration will be required when using any analog inputs. The P3 wiring works with any analog 0-5V sensor which is the standard among universal sensors.

30-day Money Back Guarantee  - if you're not in love with the P3 gauge like we are, send it back for a full refund (less shipping costs)
One year warranty  - covers you from defects for one year

For further information, visit our P3 Gauge page.

Data Displays

Intake Air Temp

Exhaust Gas Temp

Coolant Temp

Boost/Vacuum

Ignition Timing

Throttle Opening

Uncorrected Speed

Uncorrected RPM

Programmable Shift Light

Battery Voltage

0-60, 0-100 Timing

60-0, 100-0 Timing


P3 Gauge Demo:


The P3 Gauge In Action:



This item fits the following BMWs:
2008-2011  E90 BMW  328i 328xi 328i xDrive 335d 335i 335xi 335i xDrive M3 - Sedan
2008-2012  E91 BMW  328i 328xi 328i xDrive - Wagon
2008-2013  E92 BMW  328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2008-2013  E93 BMW  328i 335i M3 - Convertible

 

 

Qty
Starting At $409.00
Ships from Supplier - Aug 21, 2018
Free Shipping Free Shipping
Add to Wish List
P3Cars Vent Integrated Data Display and Boost Gauge - F10 528i, 535i, 550i, M5 2011+
P3 Gauges
Part Number: P3-F10-GAUGE

As used on the Frozen M5
Multi-Informational Display Blended With Your Factory Dash Vent!

  • Data Display and Recorder
  • Diagnostic Fault Code Display and Clearing
  • OEM Appearance and Fitment
  • Plug & Go Install!

The P3Cars Vent Integrated Digital Interface (vidi) is the data display you've always wanted. It simply plugs in to the OBD communication port - no modifications or re-wiring needed at all! Pop out your stock air vent, run the data cables through the dash, plug in the cable, reinstall the vent with the new display and you're done! The P3 gauge reads and interprets data available from the OBD port and displays it in realtime. Data that was previously only available with advanced factory diagnostic tools is now literally at your fingertips. Use the data stream to evaluate your engine performance, acceleration and braking improvements from modifications, cooling system performance, battery condition, and more. You can record and play back 15 seconds of data for analysis. It also works as a diagnostic trouble code display and has a clear function for resetting the codes.

The whole kit is installed in the original left-side air vent housing. You can order it two ways - the basic display for a DIY install in your original vent (easy!) or pre-installed in a new OE BMW vent (easier!). When you run the cables through the dash and install the vent housing there is no trace of the P3 gauge's aftermarket installation. It's so well-integrated that it looks like a BMW part. It's color-matched to your existing gauges and has a manual dimmer or tap into an existing source to join the dash's auto-dimmer. The entire kit can be un-installed for use in another vehicle or sold. The P3 uses the car's existing OBD communication port, which is the same one used by dealerships, shops, and state inspection stations so unplug the connector when access to the OBD port is required.

For further information, visit our P3 Gauge page.

Data Displays

Intake Air Temp

Exhaust Gas Temp

Coolant Temp

Boost/Vacuum

Ignition Timing

Throttle Opening

Uncorrected Speed

Uncorrected RPM

Programmable Shift Light

Battery Voltage

0-60, 0-100 Timing

60-0, 100-0 Timing


P3 Gauge Installation in F10 5-series:



This item fits the following BMWs:
2011+  F10 BMW  528i 535i 535i xDrive 550i 550i xDrive M5

 

 

Qty
Starting At $389.00
Ships from Supplier - Aug 21, 2018
Free Shipping Free Shipping
Add to Wish List
P3Cars Low Profile OBD Plug with 2-ft Extension Harness
P3 Gauges
Part Number: P30BDFLEX

If you have ever wished the OBD plug was easier to access this is the product for you! P3 Cars developed this extension harness for use with their wonderful P3 Gauges but it serves other purposes too. The main feature is the low profile plug that is connected to the car's factory OBD port (by the driver's ankle or knee). With the P3 Gauge or other OBD tools the plug can be large and bulky which can interfere with installation or un-plugging the unit. In some cases the installation requires you to modify the cover for the OBD port for a seamless install. But with the slim design of the P3 extension harness it fits out of sight in almost every application.

The second great feature is that you can now plug into the OBD port from almost anywhere around the car. One complaint most people have is the OBD socket is hidden or awkward to plug anything into. With 2 feet of extension you can now mount the new socket in a more convenient location - higher on the dash, the center console, even under the hood (on some models)! The new location is completely customizable. Tuners and service techs who use multiple plug-in OBD tools really love this harness because they no longer have to crawl around the interior over and over.

This extension harness works on all OBD-II vehicles, including non-BMW cars and trucks.
Qty
$30.00
Ships from Supplier - Aug 21, 2018
Add to Wish List
P3Cars Vent Integrated Data Display and Boost Gauge - E9X 335i 2007
P3 Gauges
Part Number: P3-E9X-GAUGE-07

  • Data Display and Recorder
  • OEM Appearance and Fitment
  • Plug & Go Install!

The P3Cars Vent Integrated Digital Interface (vidi) is the data display you've always wanted. The P3 gauge reads and interprets data available from the OBD port and from analog sources and displays it in realtime. Data that was previously only available with advanced factory diagnostic tools is now literally at your fingertips. Use the data stream to evaluate your engine performance, acceleration and braking improvements from modifications, cooling system performance, battery condition, and more. Whether your 335i is highly tuned, or bone stock, you want to be assured your engine is running properly and the turbos are creating and maintaining boost. On 2007 models it reads boost from an auxiliary sensor that you install (t-connector and vacuum line included). This makes it the perfect companion to JB or other piggyback modules so you can display the actual boost instead of reading the incorrect value from the OBD port.

The whole kit is installed in the original left-side air vent housing. You can order it two ways - the basic display for a DIY install in your original vent (easy!) or pre-installed in a new OE BMW vent (easier!). Wit the cables and hardware tucked away behind the dash there is no trace of the P3 gauge's aftermarket installation. It's so well-integrated that it looks like a factory BMW part! It's color-matched to your existing gauges and has a dimmer feature. The entire kit is totally reversible.

Analog Features. The P3 gauge is equipped with three analog inputs which allows you to add other sensors and more data. For instance, if you wanted to display Air/Fuel readings you can use an analog line to your AFR wideband sensor in the exhaust. Or fluid temps from the transmission, differential, etc. You can also read before/after intercooler temps or just about anything else you can imagine. The P3 gauge becomes your own custom dash just like a race car. Additional parts and gauge configuration will be required when using any analog inputs. The P3 wiring works with any analog 0-5V sensor which is the standard among universal sensors.

30-day Money Back Guarantee - if you're not in love with the P3 gauge like we are, send it back for a full refund (less shipping costs)
One year warranty - covers you from defects for one year

For further information, visit our P3 Gauge page.

The 2007 335i's diagnostic connector does not have all of the available data as the 2008+ wiring layout. Therefore, a 2007 will not display as much information as what is available on later models. The install for the standard version is not as plug and play but the end result is still a slick dash-intergrated boost gauge. Installation requires tapping existing wiring for power and ground (and optional dimmer). Boost is taken from the existing vacuum line.

Features:
  • Easy Install
  • Factory Integration & Color Match
  • Universal Aux Inputs for Sensors
  • On the Fly Configuration Menu
Multiple Gauge Displays:
  • Boost/Vacuum
  • Universal connectors allow you to choose other analog inputs
  • Battery Voltage

Click here for general installation instructions.
Click here for 2007-specific installation notes.

This item fits the following BMWs:
2007 E90 BMW 335i 335xi 335i xDrive - Sedan
2007 E92 BMW 335i 335xi 335i xDrive - Coupe
Qty
Starting At $409.00
Ships from Supplier - Aug 21, 2018
Free Shipping Free Shipping
Add to Wish List
P3Cars Vent Integrated Data Display and Boost Gauge - F12 640i, 650i, M6 2011+
P3 Gauges
Part Number: P3-F12-GAUGE

As Used on the Turner F13 M6
Multi-Informational Display Blended With Your Factory Dash Vent!

  • Data Display and Recorder
  • Fault Code Reader and Clearing
  • OEM Appearance and Fitment
  • Plug & Go Install!

The P3Cars Vent Integrated Digital Interface (vidi) is the data display you've always wanted. It simply plugs in to the OBD communication port - no modifications or re-wiring needed at all! Pop out your stock air vent, run the data cables through the dash, reinstall the vent with the new display and you're done! The P3 gauge reads and interprets data available from the OBD port and displays it in realtime. Data that was previously only available with advanced factory diagnostic tools is now literally at your fingertips. On newer models BMW took away gauges and information displays and now you can get that information back! Use the data stream to evaluate your engine performance, acceleration and braking improvements from modifications, cooling system performance, battery condition, and more. Use the data to spot signs of trouble before it's too late. You can record and play back 15 seconds of data for analysis. It also works as a diagnostic trouble code display and has a clear function for resetting the codes. Auxiliary inputs also included so you can read actual boost on supercharged or turbo engines (t-connector and vacuum line included). This makes it the perfect companion to JB or other piggyback modules so you can display the actual boost instead of reading the incorrect value from the OBD port.

The whole kit is installed in the original left-side air vent housing. You can order it two ways - the basic display for a DIY install in your original vent (easy!) or pre-installed in a new OE BMW vent (easier!). Wit the cables and hardware tucked away behind the dash there is no trace of the P3 gauge's aftermarket installation. It's so well-integrated that it looks like a factory BMW part! It's color-matched to your existing gauges and has a dimmer feature. The entire kit is totally reversible. The P3 uses the car's existing OBD communication port, which is the same one used by dealerships, shops, and state inspection stations so just unplug the connector when access to the OBD port is required.

Analog Features. The P3 gauge is equipped with three analog inputs which allows you to add other sensors and more data. For instance, if you wanted to display Air/Fuel readings you can use an analog line to your AFR wideband sensor in the exhaust. Or fluid temps from the transmission, differential, etc. You can also read before/after intercooler temps or just about anything else you can imagine. The P3 gauge becomes your own custom dash just like a race car. Additional parts and gauge configuration will be required when using any analog inputs. The P3 wiring works with any analog 0-5V sensor which is the standard among universal sensors.

30-day Money Back Guarantee - if you're not in love with the P3 gauge like we are, send it back for a full refund (less shipping costs)
One year warranty - covers you from defects for one year

For further information, visit our P3 Gauge page.

Data Displays

Intake Air Temp

Exhaust Gas Temp

Coolant Temp

Boost/Vacuum

Ignition Timing

Throttle Opening

Uncorrected Speed

Uncorrected RPM

Programmable Shift Light

Battery Voltage

0-60, 0-100 Timing

60-0, 100-0 Timing


P3 Gauge Demo:


P3 Gauge Installation in F10 5-series (F12 6 series is very similar):



This item fits the following BMWs:
2012+ F12 BMW 640i 650i 650i xDrive M6
P3Cars Vent Integrated Data Display and Boost Gauge - E46 3 series 1999-2006
P3 Gauges
Part Number: P3-E46-GAUGE

As Used on our Project E46 M3
Multi-Informational Display Blended With Your Factory Dash Vent!

  • Data Display and Recorder
  • Diagnostic Fault Code Display and Clearing
  • OEM Appearance and Fitment
  • Plug & Go Install!

The P3Cars Vent Integrated Digital Interface (vidi) is the data display you've always wanted. It simply plugs in to the OBD communication port - no modifications or re-wiring needed at all! Pop out your stock air vent, run the data cables through the dash, reinstall the vent with the new display and you're done! The P3 gauge reads and interprets data available from the OBD port and displays it in realtime. Data that was previously only available with advanced factory diagnostic tools is now literally at your fingertips. On newer models BMW took away gauges and information displays and now you can get that information back! Use the data stream to evaluate your engine performance, acceleration and braking improvements from modifications, cooling system performance, battery condition, and more. Use the data to spot signs of trouble before it's too late. You can record and play back 15 seconds of data for analysis. It also works as a diagnostic trouble code display and has a clear function for resetting the codes. Auxiliary inputs also included so you can read actual boost on supercharged or turbo engines (t-connector and vacuum line included). This makes it the perfect companion to JB or other piggyback modules so you can display the actual boost instead of reading the incorrect value from the OBD port.

The whole kit is installed in the original left-side air vent housing. You can order it two ways - the basic display for a DIY install in your original vent (easy!) or pre-installed in a new OE BMW vent (easier!). Wit the cables and hardware tucked away behind the dash there is no trace of the P3 gauge's aftermarket installation. It's so well-integrated that it looks like a factory BMW part! It's color-matched to your existing gauges and has a dimmer feature. The entire kit is totally reversible. The P3 uses the car's existing OBD communication port, which is the same one used by dealerships, shops, and state inspection stations so just unplug the connector when access to the OBD port is required.

Analog Features. The P3 gauge is equipped with three analog inputs which allows you to add other sensors and more data. For instance, if you wanted to display Air/Fuel readings you can use an analog line to your AFR wideband sensor in the exhaust. Or fluid temps from the transmission, differential, etc. You can also read before/after intercooler temps or just about anything else you can imagine. The P3 gauge becomes your own custom dash just like a race car. Additional parts and gauge configuration will be required when using any analog inputs. The P3 wiring works with any analog 0-5V sensor which is the standard among universal sensors.

30-day Money Back Guarantee - if you're not in love with the P3 gauge like we are, send it back for a full refund (less shipping costs)
One year warranty - covers you from defects for one year

For further information, visit our P3 Gauge page.

Data Displays

Intake Air Temp

Coolant Temp

Boost/Vacuum

Ignition Timing

Throttle Opening

Uncorrected Speed

Uncorrected RPM

Programmable Shift Light

Battery Voltage


P3 Gauge Demo:


The P3 Gauge In Action:



This item fits the following BMWs:
1999-2005 E46 BMW 4 Door Sedan 323i 325i 325xi 328i 330i 330xi
2000-2006 E46 BMW 2 Door Coupe & Convertible 323ci 325ci 328ci 330ci
Qty
Starting At $389.00
Ships from Supplier - Aug 21, 2018
Free Shipping Free Shipping
Add to Wish List
P3Cars Vent Integrated Data Display and Boost Gauge - F30 328i, 335i, F32 428i 435i
P3 Gauges
Part Number: P3-F30-GAUGE-X

As Used on our Project F30 335i
Multi-Informational Display Blended With Your Factory Dash Vent!

  • Data Display and Recorder
  • Fault Code Reader and Clearing
  • OEM Appearance and Fitment
  • Plug & Go Install!

The P3Cars Vent Integrated Digital Interface (vidi) is the data display you've always wanted. It simply plugs in to the OBD communication port - no modifications or re-wiring needed at all! Pop out your stock air vent, run the data cables through the dash, reinstall the vent with the new display and you're done! The P3 gauge reads and interprets data available from the OBD port and displays it in realtime. Data that was previously only available with advanced factory diagnostic tools is now literally at your fingertips. On newer models BMW took away gauges and information displays and now you can get that information back! Use the data stream to evaluate your engine performance, acceleration and braking improvements from modifications, cooling system performance, battery condition, and more. Use the data to spot signs of trouble before it's too late. You can record and play back 15 seconds of data for analysis. It also works as a diagnostic trouble code display and has a clear function for resetting the codes. Auxiliary inputs also included so you can read actual boost on supercharged or turbo engines (t-connector and vacuum line included). This makes it the perfect companion to JB or other piggyback modules so you can display the actual boost instead of reading the incorrect value from the OBD port.

The whole kit is installed in the original left-side air vent housing. You can order it two ways - the basic display for a DIY install in your original vent (easy!) or pre-installed in a new OE BMW vent (easier!). Wit the cables and hardware tucked away behind the dash there is no trace of the P3 gauge's aftermarket installation. It's so well-integrated that it looks like a factory BMW part! It's color-matched to your existing gauges and has a dimmer feature. The entire kit is totally reversible. The P3 uses the car's existing OBD communication port, which is the same one used by dealerships, shops, and state inspection stations so just unplug the connector when access to the OBD port is required.

Analog Features.  The P3 gauge is equipped with three analog inputs which allows you to add other sensors and more data. For instance, if you wanted to display Air/Fuel readings you can use an analog line to your AFR wideband sensor in the exhaust. Or fluid temps from the transmission, differential, etc. You can also read before/after intercooler temps or just about anything else you can imagine. The P3 gauge becomes your own custom dash just like a race car. Additional parts and gauge configuration will be required when using any analog inputs. The P3 wiring works with any analog 0-5V sensor which is the standard among universal sensors.

30-day Money Back Guarantee  - if you're not in love with the P3 gauge like we are, send it back for a full refund (less shipping costs)
One year warranty  - covers you from defects for one year

For further information, visit our P3 Gauge page.

Data Displays

Intake Air Temp

Exhaust Gas Temp

Coolant Temp

Boost/Vacuum

Ignition Timing

Throttle Opening

Uncorrected Speed

Uncorrected RPM

Programmable Shift Light

Battery Voltage

0-60, 0-100 Timing

60-0, 100-0 Timing


P3 Gauge Demo:


The P3 Gauge In Action:


This item fits the following BMWs:
2012+ F30 BMW  320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive - Sedan
2013+ F31 BMW  328i xDrive 328d xDrive - wagon
2013+ F32 BMW  428i 428i xDrive 435i 435i xDrive - Coupe
2013+ F33 BMW  428i Convertible 428i xDrive Convertible 435i Convertible - Convertible
2014+ F34 BMW  328i xDrive GT, 335i xDrive GT - Gran Tourismo

 

 

Qty
Starting At $389.00
Ships from Supplier - Aug 21, 2018
Free Shipping Free Shipping
Add to Wish List
P3Cars Vent Integrated Data Display and Boost Gauge - E60 5 series 2004-2007
P3 Gauges
Part Number: P3-E60-GAUGE-K

Multi-Informational Display Blended With Your Factory Dash Vent!

  • Data Display and Recorder - get back the info BMW took away!
  • Fault Code Reader and Clearing - get diagnostics without a trip to the dealer!
  • OEM Appearance and Fitment - integrates seamlessly with your dash; color-matched lighting!
  • Plug & Go Install! - installs in as little as 30 minutes!

The P3Cars Vent Integrated Digital Interface (vidi) is the data display you've always wanted. It simply plugs in to the OBD communication port - no modifications or re-wiring needed at all! Pop out your stock air vent, run the data cables through the dash, reinstall the vent with the new display and you're done! The P3 gauge reads and interprets data available from the OBD port and displays it in realtime. Data that was previously only available with advanced factory diagnostic tools is now literally at your fingertips. On newer models BMW took away gauges and information displays and now you can get that information back! Use the data stream to evaluate your engine performance, acceleration and braking improvements from modifications, cooling system performance, battery condition, and more. Use the data to spot signs of trouble before it's too late. You can record and play back 15 seconds of data for analysis. It also works as a diagnostic trouble code display and has a clear function for resetting the codes. Auxiliary inputs also included so you can read actual boost on supercharged or turbo engines (t-connector and vacuum line included). This makes it the perfect companion to JB or other piggyback modules so you can display the actual boost instead of reading the incorrect value from the OBD port.

The whole kit is installed in the original left-side air vent housing. You can order it two ways - the basic display for a DIY install in your original vent (easy!) or pre-installed in a new OE BMW vent (easier!). Wit the cables and hardware tucked away behind the dash there is no trace of the P3 gauge's aftermarket installation. It's so well-integrated that it looks like a factory BMW part! It's color-matched to your existing gauges and has a dimmer feature. The entire kit is totally reversible. The P3 uses the car's existing OBD communication port, which is the same one used by dealerships, shops, and state inspection stations so just unplug the connector when access to the OBD port is required.

Analog Features. The P3 gauge is equipped with three analog inputs which allows you to add other sensors and more data. For instance, if you wanted to display Air/Fuel readings you can use an analog line to your AFR wideband sensor in the exhaust. Or fluid temps from the transmission, differential, etc. You can also read before/after intercooler temps or just about anything else you can imagine. The P3 gauge becomes your own custom dash just like a race car. Additional parts and gauge configuration will be required when using any analog inputs. The P3 wiring works with any analog 0-5V sensor which is the standard among universal sensors.

30-day Money Back Guarantee - if you're not in love with the P3 gauge like we are, send it back for a full refund (less shipping costs)
One year warranty - covers you from defects for one year

For further information, visit our P3 Gauge page.

Data Displays

Intake Air Temp

Coolant Temp

Boost/Vacuum

Ignition Timing

Throttle Opening

Uncorrected Speed

Uncorrected RPM

Programmable Shift Light

Battery Voltage


P3 Gauge Demo:


The P3 Gauge Install Guide:



This item fits the following BMWs:
2004-2007 E60 BMW 525i 525xi 530i 530xi 545I 550i
only for left hand drive models.
P3Cars Vent Integrated Data Display and Boost Gauge - E60 5 series 2008-2010
P3 Gauges
Part Number: P3-E60-GAUGE-C

Multi-Informational Display Blended With Your Factory Dash Vent!

  • Data Display and Recorder - get back the info BMW took away!
  • Fault Code Reader and Clearing - get diagnostics without a trip to the dealer!
  • OEM Appearance and Fitment - integrates seamlessly with your dash; color-matched lighting!
  • Plug & Go Install! - installs in as little as 30 minutes!

The P3Cars Vent Integrated Digital Interface (vidi) is the data display you've always wanted. It simply plugs in to the OBD communication port - no modifications or re-wiring needed at all! Pop out your stock air vent, run the data cables through the dash, reinstall the vent with the new display and you're done! The P3 gauge reads and interprets data available from the OBD port and displays it in realtime. Data that was previously only available with advanced factory diagnostic tools is now literally at your fingertips. On newer models BMW took away gauges and information displays and now you can get that information back! Use the data stream to evaluate your engine performance, acceleration and braking improvements from modifications, cooling system performance, battery condition, and more. Use the data to spot signs of trouble before it's too late. You can record and play back 15 seconds of data for analysis. It also works as a diagnostic trouble code display and has a clear function for resetting the codes. Auxiliary inputs also included so you can read actual boost on supercharged or turbo engines (t-connector and vacuum line included). This makes it the perfect companion to JB or other piggyback modules so you can display the actual boost instead of reading the incorrect value from the OBD port.

The whole kit is installed in the original left-side air vent housing. You can order it two ways - the basic display for a DIY install in your original vent (easy!) or pre-installed in a new OE BMW vent (easier!). Wit the cables and hardware tucked away behind the dash there is no trace of the P3 gauge's aftermarket installation. It's so well-integrated that it looks like a factory BMW part! It's color-matched to your existing gauges and has a dimmer feature. The entire kit is totally reversible. The P3 uses the car's existing OBD communication port, which is the same one used by dealerships, shops, and state inspection stations so just unplug the connector when access to the OBD port is required.

Analog Features. The P3 gauge is equipped with three analog inputs which allows you to add other sensors and more data. For instance, if you wanted to display Air/Fuel readings you can use an analog line to your AFR wideband sensor in the exhaust. Or fluid temps from the transmission, differential, etc. You can also read before/after intercooler temps or just about anything else you can imagine. The P3 gauge becomes your own custom dash just like a race car. Additional parts and gauge configuration will be required when using any analog inputs. The P3 wiring works with any analog 0-5V sensor which is the standard among universal sensors.

30-day Money Back Guarantee - if you're not in love with the P3 gauge like we are, send it back for a full refund (less shipping costs)
One year warranty - covers you from defects for one year

For further information, visit our P3 Gauge page.

Data Displays

Intake Air Temp

Exhaust Gas Temp

Coolant Temp

Boost/Vacuum

Ignition Timing

Throttle Opening

Uncorrected Speed

Uncorrected RPM

Programmable Shift Light

Battery Voltage

0-60, 0-100 Timing

60-0, 100-0 Timing


P3 Gauge Demo:


The P3 Gauge Install Guide:



This item fits the following BMWs:
2008-2010 E60 BMW 528i 528xi 528i xDrive 535i 535xi 535i xDrive 550i M5
Only for left hand drive models.
Qty
Starting At $399.00
Ships from Supplier - Aug 21, 2018
Free Shipping Free Shipping
Add to Wish List
P3Cars Vent Integrated Data Display and Boost Gauge - MINI R56 R57 R58 R59
P3 Gauges
Part Number: P3-R56-GAUGE

Multi-Informational Display Blended With Your Factory Dash Vent!

  • Data Display and Recorder - get back the info BMW took away!
  • Fault Code Reader and Clearing - get diagnostics without a trip to the dealer!
  • OEM Appearance and Fitment - integrates seamlessly with your dash; color-matched lighting!
  • Plug & Go Install! - installs in as little as 30 minutes!

The P3Cars Vent Integrated Digital Interface (vidi) is the data display you've always wanted. It simply plugs in to the OBD communication port - no modifications or re-wiring needed at all! Pop out your stock air vent, run the data cables through the dash, reinstall the vent with the new display and you're done! The P3 gauge reads and interprets data available from the OBD port and displays it in realtime. Data that was previously only available with advanced factory diagnostic tools is now literally at your fingertips. On newer models MINI took away gauges and information displays and now you can get that information back! Use the data stream to evaluate your engine performance, acceleration and braking improvements from modifications, cooling system performance, battery condition, and more. Use the data to spot signs of trouble before it's too late. You can record and play back 15 seconds of data for analysis. It also works as a diagnostic trouble code display and has a clear function for resetting the codes. Auxiliary inputs also included so you can read actual boost on supercharged or turbo engines (t-connector and vacuum line included). This makes it the perfect companion to piggyback modules so you can display the actual boost instead of reading the incorrect value from the OBD port.

The kit is installed onto the trim surrounding the steering wheel next to the vent to the right of the steering wheel. This kit is a fairly easy install (see install video below). When you run the cables through the dash and install the vent housing there is no trace of the P3 gauge's aftermarket installation. It's so well-integrated that it looks like a MINI part. It's color-matched to your existing gauges and has a manual dimmer or tap into an existing source to join the dash's auto-dimmer. The entire kit can be un-installed for use in another vehicle or sold. The P3 uses the car's existing OBD communication port, which is the same one used by dealerships, shops, and state inspection stations so unplug the connector when access to the OBD port is required.

Analog Features. The P3 gauge is equipped with three analog inputs which allows you to add other sensors and more data. For instance, if you wanted to display Air/Fuel readings you can use an analog line to your AFR wideband sensor in the exhaust. Or fluid temps from the transmission, differential, etc. You can also read before/after intercooler temps or just about anything else you can imagine. The P3 gauge becomes your own custom dash just like a race car. Additional parts and gauge configuration will be required when using any analog inputs. The P3 wiring works with any analog 0-5V sensor which is the standard among universal sensors.

30-day Money Back Guarantee - if you're not in love with the P3 gauge like we are, send it back for a full refund (less shipping costs)
One year warranty - covers you from defects for one year

For further information, visit our P3 Gauge page.

Data Displays

Intake Air Temp

Coolant Temp

Boost/Vacuum

Ignition Timing

Throttle Opening

Uncorrected Speed

Uncorrected RPM

Programmable Shift Light

Battery Voltage


P3 Gauge Demo:


Installation Instructions


This item fits the following BMWs:
2007+ R56 MINI MINI Cooper, MINI Cooper S
2007+ R55 MINI MINI Cooper Clubman, MINI Cooper S Clubman
2007+ R57 MINI MINI Cooper Convertible, MINI Cooper S Convertible,
2007+ R58 MINI MINI Cooper Coupe, MINI Cooper S Coupe,
2011+ R89 MINI MINI Cooper Roadster, MINI Cooper Roadster S
Qty
Starting At $399.00
Ships from Supplier - Aug 21, 2018
Free Shipping Free Shipping
Add to Wish List
P3Cars Vent Integrated Data Display and Boost Gauge - E70 X5, E71 X6
P3 Gauges
Part Number: P3-E70-GAUGE

Multi-Informational Display Blended With Your Factory Dash Vent!

  • Data Display and Recorder - get back the info BMW took away!
  • Fault Code Reader and Clearing - get diagnostics without a trip to the dealer!
  • OEM Appearance and Fitment - integrates seamlessly with your dash; color-matched lighting!
  • Plug & Go Install! - installs in as little as 30 minutes!

The P3Cars Vent Integrated Digital Interface (vidi) is the data display you've always wanted. It simply plugs in to the OBD communication port - no modifications or re-wiring needed at all! Pop out your stock air vent, run the data cables through the dash, reinstall the vent with the new display and you're done! The P3 gauge reads and interprets data available from the OBD port and displays it in realtime. Data that was previously only available with advanced factory diagnostic tools is now literally at your fingertips. On newer models BMW took away gauges and information displays and now you can get that information back! Use the data stream to evaluate your engine performance, acceleration and braking improvements from modifications, cooling system performance, battery condition, and more. Use the data to spot signs of trouble before it's too late. You can record and play back 15 seconds of data for analysis. It also works as a diagnostic trouble code display and has a clear function for resetting the codes. Auxiliary inputs also included so you can read actual boost on supercharged or turbo engines (t-connector and vacuum line included). This makes it the perfect companion to JB or other piggyback modules so you can display the actual boost instead of reading the incorrect value from the OBD port.

The whole kit is installed in the original left-side air vent housing. You can order it two ways - the basic display for a DIY install in your original vent (easy!) or pre-installed in a new OE BMW vent (easier!). Wit the cables and hardware tucked away behind the dash there is no trace of the P3 gauge's aftermarket installation. It's so well-integrated that it looks like a factory BMW part! It's color-matched to your existing gauges and has a dimmer feature. The entire kit is totally reversible. The P3 uses the car's existing OBD communication port, which is the same one used by dealerships, shops, and state inspection stations so just unplug the connector when access to the OBD port is required.

Analog Features. The P3 gauge is equipped with three analog inputs which allows you to add other sensors and more data. For instance, if you wanted to display Air/Fuel readings you can use an analog line to your AFR wideband sensor in the exhaust. Or fluid temps from the transmission, differential, etc. You can also read before/after intercooler temps or just about anything else you can imagine. The P3 gauge becomes your own custom dash just like a race car. Additional parts and gauge configuration will be required when using any analog inputs. The P3 wiring works with any analog 0-5V sensor which is the standard among universal sensors.

30-day Money Back Guarantee - if you're not in love with the P3 gauge like we are, send it back for a full refund (less shipping costs)
One year warranty - covers you from defects for one year

For further information, visit our P3 Gauge page.

Data Displays

Intake Air Temp

Exhaust Gas Temp

Coolant Temp

Boost/Vacuum

Ignition Timing

Throttle Opening

Uncorrected Speed

Uncorrected RPM

Programmable Shift Light

Battery Voltage

0-60, Timing


P3 Gauge Demo:


This item fits the following BMWs:
2007-2013 E70 BMW X5 3.0si X5 4.8i X5 xDrive30i X5 xDrive35d X5 xDrive35i X5 xDrive48i X5 xDrive50i X5M
2008+ E71 BMW X6 xDrive35i X6 xDrive50i X6M
Qty
Starting At $389.00
Ships from Supplier - Aug 21, 2018
Free Shipping Free Shipping
Add to Wish List
P3Cars Vent Integrated Data Display and Boost Gauge - F22 M235i, 228i - F20 M135i
P3 Gauges
Part Number: P3-F20-GAUGE

Multi-Informational Display Blended With Your Factory Dash Vent!

  • Data Display and Recorder - get back the info BMW took away!
  • Fault Code Reader and Clearing - get diagnostics without a trip to the dealer!
  • OEM Appearance and Fitment - integrates seamlessly with your dash; color-matched lighting!
  • Plug & Go Install! - installs in as little as 30 minutes!

The P3Cars Vent Integrated Digital Interface (vidi) is the data display you've always wanted. It simply plugs in to the OBD communication port - no modifications or re-wiring needed at all! Pop out your stock air vent, run the data cables through the dash, reinstall the vent with the new display and you're done! The P3 gauge reads and interprets data available from the OBD port and displays it in realtime. Data that was previously only available with advanced factory diagnostic tools is now literally at your fingertips. On newer models BMW took away gauges and information displays and now you can get that information back! Use the data stream to evaluate your engine performance, acceleration and braking improvements from modifications, cooling system performance, battery condition, and more. Use the data to spot signs of trouble before it's too late. You can record and play back 15 seconds of data for analysis. It also works as a diagnostic trouble code display and has a clear function for resetting the codes. Auxiliary inputs also included so you can read actual boost on supercharged or turbo engines (t-connector and vacuum line included). This makes it the perfect companion to JB or other piggyback modules so you can display the actual boost instead of reading the incorrect value from the OBD port.

The whole kit is installed in the original left-side air vent housing. You can order it two ways - the basic display for a DIY install in your original vent (easy!) or pre-installed in a new OE BMW vent (easier!). Wit the cables and hardware tucked away behind the dash there is no trace of the P3 gauge's aftermarket installation. It's so well-integrated that it looks like a factory BMW part! It's color-matched to your existing gauges and has a dimmer feature. The entire kit is totally reversible. The P3 uses the car's existing OBD communication port, which is the same one used by dealerships, shops, and state inspection stations so just unplug the connector when access to the OBD port is required.

Analog Features. The P3 gauge is equipped with three analog inputs which allows you to add other sensors and more data. For instance, if you wanted to display Air/Fuel readings you can use an analog line to your AFR wideband sensor in the exhaust. Or fluid temps from the transmission, differential, etc. You can also read before/after intercooler temps or just about anything else you can imagine. The P3 gauge becomes your own custom dash just like a race car. Additional parts and gauge configuration will be required when using any analog inputs. The P3 wiring works with any analog 0-5V sensor which is the standard among universal sensors.

30-day Money Back Guarantee - if you're not in love with the P3 gauge like we are, send it back for a full refund (less shipping costs)
One year warranty - covers you from defects for one year

For further information, visit our P3 Gauge page.

Data Displays

Intake Air Temp

Exhaust Gas Temp

Coolant Temp

Boost/Vacuum

Ignition Timing

Throttle Opening

Uncorrected Speed

Uncorrected RPM

Programmable Shift Light

Battery Voltage

0-60, 0-100 Timing

60-0, 100-0 Timing


This item fits the following BMWs:
2014+ F22 BMW 228i 228i xDrive M235i M235i xDrive
2012+ F20 BMW 114d 114i 116d 116i 118d 118i 120d 120i 125d 125i M135i M135iX
Please note: The BMW F20 was not available in the US market
Qty
Starting At $389.00
Ships from Supplier - Aug 21, 2018
Free Shipping Free Shipping
Add to Wish List
P3Cars Vent Integrated Data Display and Boost Gauge - E82 128i, 135i, 1M Coupe
P3 Gauges
Part Number: P3-E8X-GAUGE-X

As Used on our Project 128i Multi-Informational Display Blended With Your Factory Dash Vent!

  • Data Display and Recorder
  • Fault Code Reader and Clearing
  • OEM Appearance and Fitment
  • Plug & Go Install!

The P3Cars Vent Integrated Digital Interface (vidi) is the data display you've always wanted. It simply plugs in to the OBD communication port - no modifications or re-wiring needed at all! Pop out your stock air vent, run the data cables through the dash, reinstall the vent with the new display and you're done! The P3 gauge reads and interprets data available from the OBD port and displays it in realtime. Data that was previously only available with advanced factory diagnostic tools is now literally at your fingertips. On newer models BMW took away gauges and information displays and now you can get that information back! Use the data stream to evaluate your engine performance, acceleration and braking improvements from modifications, cooling system performance, battery condition, and more. Use the data to spot signs of trouble before it's too late. You can record and play back 15 seconds of data for analysis. It also works as a diagnostic trouble code display and has a clear function for resetting the codes. Auxiliary inputs also included so you can read actual boost on supercharged or turbo engines (t-connector and vacuum line included). This makes it the perfect companion to JB or other piggyback modules so you can display the actual boost instead of reading the incorrect value from the OBD port.

The whole kit is installed in the original left-side air vent housing. You can order it two ways - the basic display for a DIY install in your original vent (easy!) or pre-installed in a new OE BMW vent (easier!). Wit the cables and hardware tucked away behind the dash there is no trace of the P3 gauge's aftermarket installation. It's so well-integrated that it looks like a factory BMW part! It's color-matched to your existing gauges and has a dimmer feature. The entire kit is totally reversible. The P3 uses the car's existing OBD communication port, which is the same one used by dealerships, shops, and state inspection stations so just unplug the connector when access to the OBD port is required.

Analog Features.  The P3 gauge is equipped with three analog inputs which allows you to add other sensors and more data. For instance, if you wanted to display Air/Fuel readings you can use an analog line to your AFR wideband sensor in the exhaust. Or fluid temps from the transmission, differential, etc. You can also read before/after intercooler temps or just about anything else you can imagine. The P3 gauge becomes your own custom dash just like a race car. Additional parts and gauge configuration will be required when using any analog inputs. The P3 wiring works with any analog 0-5V sensor which is the standard among universal sensors.

30-day Money Back Guarantee  - if you're not in love with the P3 gauge like we are, send it back for a full refund (less shipping costs)
One year warranty  - covers you from defects for one year

For further information, visit our P3 Gauge page.

Data Displays

Intake Air Temp

Exhaust Gas Temp

Coolant Temp

Boost/Vacuum

Ignition Timing

Throttle Opening

Uncorrected Speed

Uncorrected RPM

Programmable Shift Light

Battery Voltage

0-60, 0-100 Timing

60-0, 100-0 Timing


P3 Gauge Demo:


The P3 Gauge In Action:



This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i 1M Coupe
2008-2012  E88 BMW  128i 135i

 

 

Qty
Starting At $399.00
Ships from Supplier - Aug 21, 2018
Free Shipping Free Shipping
Add to Wish List
P3Cars Vent Integrated Data Display and Boost Gauge - E85 E86 Z4, Z4M
P3 Gauges
Part Number: P3-E85-GAUGE

Multi-Informational Display Blended With Your Factory Dash Vent!

  • Data Display and Recorder - get back the info BMW took away!
  • Fault Code Reader and Clearing - get diagnostics without a trip to the dealer!
  • OEM Appearance and Fitment - integrates seamlessly with your dash; color-matched lighting!
  • Plug & Go Install! - installs in as little as 30 minutes!

The P3Cars Vent Integrated Digital Interface (vidi) is the data display you've always wanted. It simply plugs in to the OBD communication port - no modifications or re-wiring needed at all! Pop out your stock air vent, run the data cables through the dash, reinstall the vent with the new display and you're done! The P3 gauge reads and interprets data available from the OBD port and displays it in realtime. Data that was previously only available with advanced factory diagnostic tools is now literally at your fingertips. On newer models BMW took away gauges and information displays and now you can get that information back! Use the data stream to evaluate your engine performance, acceleration and braking improvements from modifications, cooling system performance, battery condition, and more. Use the data to spot signs of trouble before it's too late. You can record and play back 15 seconds of data for analysis. It also works as a diagnostic trouble code display and has a clear function for resetting the codes. Auxiliary inputs also included so you can read actual boost on supercharged or turbo engines (t-connector and vacuum line included). This makes it the perfect companion to JB or other piggyback modules so you can display the actual boost instead of reading the incorrect value from the OBD port.

The whole kit is installed in the original left-side air vent housing. You can order it two ways - the basic display for a DIY install in your original vent (easy!) or pre-installed in a new OE BMW vent (easier!). Wit the cables and hardware tucked away behind the dash there is no trace of the P3 gauge's aftermarket installation. It's so well-integrated that it looks like a factory BMW part! It's color-matched to your existing gauges and has a dimmer feature. The entire kit is totally reversible. The P3 uses the car's existing OBD communication port, which is the same one used by dealerships, shops, and state inspection stations so just unplug the connector when access to the OBD port is required.

Analog Features. The P3 gauge is equipped with three analog inputs which allows you to add other sensors and more data. For instance, if you wanted to display Air/Fuel readings you can use an analog line to your AFR wideband sensor in the exhaust. Or fluid temps from the transmission, differential, etc. You can also read before/after intercooler temps or just about anything else you can imagine. The P3 gauge becomes your own custom dash just like a race car. Additional parts and gauge configuration will be required when using any analog inputs. The P3 wiring works with any analog 0-5V sensor which is the standard among universal sensors.

30-day Money Back Guarantee - if you're not in love with the P3 gauge like we are, send it back for a full refund (less shipping costs)
One year warranty - covers you from defects for one year

For further information, visit our P3 Gauge page.

Data Displays

Intake Air Temp

Coolant Temp

Boost/Vacuum

Ignition Timing

Throttle Opening

Uncorrected Speed

Uncorrected RPM

Programmable Shift Light

Battery Voltage


P3 Gauge Demo:


This item fits the following BMWs:
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
P3Cars Vent Integrated Data Display and Boost Gauge - E89 Z4 2009+
P3 Gauges
Part Number: P3-E89-GAUGE

Multi-Informational Display Blended With Your Factory Dash Vent!

  • Data Display and Recorder - get back the info BMW took away!
  • Fault Code Reader and Clearing - get diagnostics without a trip to the dealer!
  • OEM Appearance and Fitment - integrates seamlessly with your dash; color-matched lighting!
  • Plug & Go Install! - installs in as little as 30 minutes!

The P3Cars Vent Integrated Digital Interface (vidi) is the data display you've always wanted. It simply plugs in to the OBD communication port - no modifications or re-wiring needed at all! Pop out your stock air vent, run the data cables through the dash, reinstall the vent with the new display and you're done! The P3 gauge reads and interprets data available from the OBD port and displays it in realtime. Data that was previously only available with advanced factory diagnostic tools is now literally at your fingertips. On newer models BMW took away gauges and information displays and now you can get that information back! Use the data stream to evaluate your engine performance, acceleration and braking improvements from modifications, cooling system performance, battery condition, and more. Use the data to spot signs of trouble before it's too late. You can record and play back 15 seconds of data for analysis. It also works as a diagnostic trouble code display and has a clear function for resetting the codes. Auxiliary inputs also included so you can read actual boost on supercharged or turbo engines (t-connector and vacuum line included). This makes it the perfect companion to JB or other piggyback modules so you can display the actual boost instead of reading the incorrect value from the OBD port.

The whole kit is installed in the original left-side air vent housing. You can order it two ways - the basic display for a DIY install in your original vent (easy!) or pre-installed in a new OE BMW vent (easier!). Wit the cables and hardware tucked away behind the dash there is no trace of the P3 gauge's aftermarket installation. It's so well-integrated that it looks like a factory BMW part! It's color-matched to your existing gauges and has a dimmer feature. The entire kit is totally reversible. The P3 uses the car's existing OBD communication port, which is the same one used by dealerships, shops, and state inspection stations so just unplug the connector when access to the OBD port is required.

Analog Features. The P3 gauge is equipped with three analog inputs which allows you to add other sensors and more data. For instance, if you wanted to display Air/Fuel readings you can use an analog line to your AFR wideband sensor in the exhaust. Or fluid temps from the transmission, differential, etc. You can also read before/after intercooler temps or just about anything else you can imagine. The P3 gauge becomes your own custom dash just like a race car. Additional parts and gauge configuration will be required when using any analog inputs. The P3 wiring works with any analog 0-5V sensor which is the standard among universal sensors.

30-day Money Back Guarantee - if you're not in love with the P3 gauge like we are, send it back for a full refund (less shipping costs)
One year warranty - covers you from defects for one year

For further information, visit our P3 Gauge page.

Data Displays

Intake Air Temp

Exhaust Gas Temp

Coolant Temp

Boost/Vacuum

Ignition Timing

Throttle Opening

Uncorrected Speed

Uncorrected RPM

Programmable Shift Light

Battery Voltage

0-60, 0-100 Timing

60-0, 100-0 Timing


P3 Gauge Demo:


This item fits the following BMWs:
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Qty
Starting At $389.00
Ships from Supplier - Aug 21, 2018
Free Shipping Free Shipping
Add to Wish List
BMW E46 - P3 OBD2 Multi-Gauge
P3 Gauges
Part Number: LvP3BE46

P3 Multi-Gauge (*Diesel engines not supported)

  • Plug and Play install - just plug into your obd2 port and install into dash!
  • Reads and clears OBD2 Codes
  • OBD2 Data for Coolant Temp, Intake Air Temp, Exhaust Gas Temp, Throttle Plate, Vehicle Speed, RPM, Shift-light, Battery voltage, 0-60 timer and more!
  • Peak Recall on all functions
  • Optional Auto-Dim or Manual Dimmer
  • 2 x universal 0-5v linear analog inputs
  • Includes digital display, custom OBD2 wire harness and control box.

 

Qty
$389.00
Ships from Supplier - Aug 21, 2018
Add to Wish List
Plug-In Analog Boost Sensor
P3 Gauges
Part Number: P3BST100

Qty
$39.95
In Stock
Add to Wish List
P3-E9X-GAUGE-VENT-08
P3 Gauges
Part Number: TMS300998

Qty
$372.94
$469.00
Limited Qty Sale
In Stock
Free Shipping Free Shipping
Add to Wish List
P3 CARS - E89 **PREINSTALLED IN VENT**LEFT HAND DRIVE ONLY**
P3 Gauges
Part Number: TMS300996

Qty
$305.40
$509.00
Limited Qty Sale
In Stock
Free Shipping Free Shipping
Add to Wish List
Track Pack Software
P3 Gauges
Part Number: P3TPK

Easily installs onto your current P3cars gauge control module to observe air/fuel ratios and track-time performance numbers.

This unit will allow display of the following:

  • 0-60mph time
  • 60-130mph time
  • 60-0mph time
  • Air/Fuel Ratio
Qty
$25.00
In Stock
Add to Wish List
P3cars
P3 Gauges
Part Number: TMS300994

Qty
$305.40
$509.00
Limited Qty Sale
In Stock
Free Shipping Free Shipping
Add to Wish List
Vent Integrated Digital Interface (VIDI)
P3 Gauges
Part Number: VP3BF2XLV

Connect with your car in an entirely new way. Why settle for just a boost gauge? Sporting features available in products 3x the price, the P3Cars Vent Integrated Digital Interface (VIDI) is the Swiss army knife of performance data, with design and integration that won't spoil the clean lines of your interior.

The P3Cars gauge is a state of the art digital data center that displays critical vehicle metrics like boost pressure, coolant temp, intake air temp, exhaust gas temp, throttle plate, speed, RPM with shift light, and battery voltage - as well as peak recall and run/record recall in all modes.

Simply put, P3Cars VIDI is the most popular, advanced gauge on the market.

  • Fully Reversible Installation: Simply plug into your OBD-II port and you're functional. No splicing or rewiring required.
  • Precise Color Match and OEM Integration: Seamless integration with interior lighting including auto or manual dimming to match dash brightness.
  • Advanced Custom Programming: Designed and programmed specifically for each car and engine, so you can be sure all features will function as expected.
  • Live Performance and Sensor Data: Real time “as it happens” data display of multiple parameters with virtually no lag or delay.
  • Built In Acceleration Performance Timer: Automatic start and stop 0-60mph (0-100kph) timer for evaluating your car’s performance and driving skill.
  • Diagnostic Data Interpretation & Reset: Read and clear diagnostic trouble codes (DTC) to reduce trips to the dealership.
  • 3x Analog Inputs for High Precision Sensors: Universal 0-5v inputs for adding additional sensors or switching boost to an analog vacuum tap.
  • Easiest Installation Possible: Put it in, plug it in, installation for even the most novice do-it-yourselfer. Optionally pre-installed in an OEM vent for further ease of installation
Qty
$489.00
Ships from Supplier - Aug 21, 2018
Free Shipping Free Shipping
Add to Wish List
P3 Boost Gauge
P3 Gauges
Part Number: BP3BE46LV

Qty
$449.00
Ships from Supplier - Aug 21, 2018
Free Shipping Free Shipping
Add to Wish List
P3-E9X-GAUGE-VENT-07
P3 Gauges
Part Number: TMS300997

Qty
$469.00
Ships from Supplier - Aug 21, 2018
Free Shipping Free Shipping
Add to Wish List
P3 Gauges
Part Number: P3-E82-GAUGE

Qty
$409.00
Ships from Supplier - Aug 21, 2018
Free Shipping Free Shipping
Add to Wish List
P3Cars Low Profile OBD2 Splitter
P3 Gauges
Part Number: P30SPLIT

P3Cars Low Profile OBD2 Splitter Allows multiple devices to attach to your port. 
Qty
$30.00
Ships from Supplier - Aug 21, 2018
Add to Wish List
P3cars
P3 Gauges
Part Number: P3-E85-GAUGE-RHD

Qty
$389.00
Ships from Supplier - Aug 21, 2018
Add to Wish List
P3 CARS - F30 BOOST GAUGE -NOT PREINSTALLED IN VENT- **LEFT HAND DRIVE ONLY**
P3 Gauges
Part Number: P3-F30-GAUGE

Qty
$389.00
Ships from Supplier - Aug 21, 2018
Free Shipping Free Shipping
Add to Wish List
P3cars
P3 Gauges
Part Number: P3-E89-GAUGE-RHD

Qty
$389.00
Ships from Supplier - Aug 21, 2018
Add to Wish List
P3 Gauges
Part Number: TMS301000

Qty
$449.00
Ships from Supplier - Aug 21, 2018
Add to Wish List
P3Cars Vent Integrated Data Display And Boost Gauge - Black
P3 Gauges
Part Number: P3-E85-GAUGE-VB

Qty
$469.00
Ships from Supplier - Aug 21, 2018
Free Shipping Free Shipping
Add to Wish List
P3Cars Vent Integrated Data Display and Boost Gauge - E60 5 series 2008-2010
P3 Gauges
Part Number: P3-E60-GAUGE-C

Qty
$399.00
Ships from Supplier - Aug 21, 2018
Free Shipping Free Shipping
Add to Wish List
Vent Integrated Digital Interface (VIDI)
P3 Gauges
Part Number: P3E4xR

Qty
$389.00
Ships from Supplier - Aug 21, 2018
Add to Wish List
P3cars
P3 Gauges
Part Number: P3-R56-GAUGE-RHD

Qty
$399.00
Ships from Supplier - Aug 21, 2018
Add to Wish List
P3cars
P3 Gauges
Part Number: P3-F30-GAUGE-RHD

Qty
$389.00
Ships from Supplier - Aug 21, 2018
Add to Wish List
P3 Gauges
Part Number: TMS300999

Qty
$489.00
Ships from Supplier - Aug 21, 2018
Add to Wish List
P3 Gauges
Part Number: TMS300995

Qty
$469.00
Ships from Supplier - Aug 21, 2018
Add to Wish List
P3Cars Vent Integrated Data Display And Boost Gauge - F10 528i, 535i, 550i, M5 2011+ (RHD)
P3 Gauges
Part Number: RvP3BF10

P3Cars Vent Integrated Data Display and Boost Gauge - E9X 335i 2007
P3 Gauges
Part Number: P3-E9X-GAUGE-07r

Qty
$409.00
Ships from Supplier - Aug 21, 2018
Add to Wish List
P3cars
P3 Gauges
Part Number: P3-F12-GAUGE-RHD

Qty
$389.00
Ships from Supplier - Aug 21, 2018
Add to Wish List
You are currently viewing items 1 - 42 of 42
  • 22 years of BMW Tuning.
  • Award winning service.
  • 10,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook