click to Chat Live
Contact YouTube Blog Twitter facebook Turner Motorsport on Instagram
1-800-280-6966
 |   Login
  • 0
 |   Login
Shopping Cart (0) Wishlist
Contact

(0) item(s) in your Shopping Cart
Home
Categories
Specials Gifts & Clothing
  1. Genuine BMW Accessories
  2. Genuine BMW Clothing
  3. Turner Shirts Hats and Gear
  4. Gifts under $25
  5. Gifts under $50
  6. Gifts under $100
  7. Gifts over $100
  8. Gift Certificates
  9. Stocking Stuffers
  10. Gift Packages
Brakes
  1. Brake Overhaul Packages
  2. Brake Pads
  3. Brake Pad Sensors
  4. Brake Rotors
  5. StopTech Big Brake Kits
  6. Brembo Big Brake Kits
  7. Stainless Steel Brake Lines
  8. Brake Fluid
  9. Brake Calipers
  10. Caliper Rebuild Kits
  11. Parking Brake Parts
  12. Brake Master Cylinders
  13. ABS/DSC System Parts
  14. Brake Cooling Ducts & Backing Plates
  15. Brake Pads - Brembo GT BBK Calipers
  16. Brake Pads - StopTech BBK Calipers
  17. CATuned Big Brake Kits
  18. Hydraulic Hand Brakes
Car Care & Accessories
  1. Car Covers
  2. Wheel & Tire Cleaning
  3. Wax, Polish and Cleaning Supplies
  4. Detailing Gear
  5. Leather & Plastic Care
  6. Car Cleaning Supplies
  7. Chassis Paint, Coatings, Sealants, and Rust Conversion
Drivetrain
  1. Differential and Gearing Upgrades
  2. Differential Mounts and Upgrades
  3. OEM Clutch Kits & Clutch Parts
  4. Performance Clutch Kits & Parts
  5. Lightweight Aluminum Flywheel Upgrades
  6. Stock OEM Dual Mass Flywheels
  7. Stainless Steel Clutch Lines
  8. Clutch Parts
  9. UUC Short Shift Kits
  10. Axle Shafts
  11. Driveshafts
  12. B&M Short Shifters
  13. Performance Short Shift Kits
  14. UUC DSSR - Double Sheer Selector Rod
  15. Drivershaft Center Support Bearings
  16. Flex Discs & Guibos
  17. Transmission Mounts
  18. Transmission Parts
Engine Chips
  1. Performance Chips, 1986-1995 Models
  2. Shark Injector Performance Software, 1996-2005 Models
  3. Performance Flash Software, 2005+ Models
  4. Sprint Booster Drive-by-Wire Module
  5. Stand-Alone Engine Management
Engine Parts
  1. Engine Performance Packages
  2. Cam Sprockets & Gears
  3. Water Pumps
  4. Thermostats
  5. Radiators & Cooling System Overhaul Kits
  6. Oil Pan Baffles
  7. Radiator Hoses, Cooling Hoses, & Hose Sets
  8. Engine Fans & Fan Clutches
  9. Underdrive Power Pulleys
  10. Camshafts
  11. Schrick Performance Camshafts
  12. E30 M3 S14 Engine Parts
  13. External Engine Parts
  14. Drive Belts & V-Belts
  15. Gaskets, Gasket Sets, Seals, & O-Rings
  16. Factory-Spec Replacement Turbos and Kits
  17. Crankcase Vent, PCV, and Oil Separator Systems
  18. Turbo Upgrades and Kits
  19. Motor Mounts
  20. Electrical Sensors, Switches, & Relays
  21. Ignition Parts
  22. Alternator & Alternator Parts
  23. Starter Motors & Starter Parts
  24. Fuel System Parts
  25. Internal Engine Parts
  26. Cylinder Head Parts & Head Bolts
  27. VANOS Units & Parts
  28. Rod Bearing Kits
  29. Oil Coolers & Oil Cooler Parts
Exhaust
  1. Supersprint Performance Exhaust Systems
  2. Performance Headers & Downpipes
  3. Turner Motorsport Performance Exhaust
  4. Akrapovic Performance Exhaust Systems
  5. Borla Performance Exhaust Systems
  6. Corsa Performance Exhaust Systems
  7. Dinan Free Flow Exhaust Systems
  8. Performance Exhaust Systems
  9. OEM Replacement Mufflers and Exhaust Systems
  10. Exhaust System Upgrades
  11. Exhaust Muffler Tips
  12. Catalytic Converters
  13. Oxygen Sensor - O2 Sensors
  14. Exhaust Gaskets Hangers and Parts
Exterior / Body
  1. Black Grills
  2. Chrome Grills & Trim
  3. Emblems & Decals for Hood, Trunk, and Wheels
  4. Painted Reflectors
  5. Front Spoilers, Bumper Covers, & Air Dams
  6. Rear Spoilers, Rear Wings, & Aprons
  7. Body Trim Parts & Accessories
  8. Carbon Fiber Trunk Lids
  9. Hood & Trunk Shocks, Struts
  10. License Plate Brackets & License Plate Frames
  11. Mirror Kits & Mirror Parts
  12. Window Regulators & Motors
  13. Wiper Blades, Wiper Pumps, & Wiper Motor Parts
  14. Hood Pins and AeroCatch Latches
  15. Racing Tow Hooks and Tow Straps
  16. Aero & Body Kits
Intake
  1. aFe Cold-Air Intake Kits
  2. Turbos & Active Autowerke Superchargers
  3. Dinan Cold Air Intake Kits
  4. Gruppe M Cold-Air Intake Kits
  5. Performance Intake Kits
  6. aFe Performance Air Filters
  7. K&N Performance Air Filters
  8. Replacement Cone Air Filters (for Cold Air Intakes)
  9. Intake Cleaning & Recharging Kits
  10. Intake Manifold Upgrades
  11. Intake Manifold Components (DISA, Vacuum, CCV, Etc)
  12. BOV, Chargepipe, and Intercooler Upgrade Kits
  13. Mass Air Sensor & Air Flow Meters
  14. Intake Boots & Hoses
  15. Throttle Body Parts
  16. Other Intake Kits
Interior
  1. Floor Mats
  2. Gauge Kits and Data Acquisition
  3. Auxiliary Input Adaptors for BMW
  4. Pedal Sets
  5. Escort Radar Detectors
  6. Factory Steering Wheels
  7. Racing Steering Wheels
  8. Shift Knobs, Shift Boots, & Shift Handles
  9. Seats & Seat Accessories
  10. Seat Belts and Racing Harnesses
  11. Cup Holders and Storage
  12. Carbon Fiber Interior Parts
  13. Door Sill Strips
  14. Heating & Air Conditioning
  15. Interior Switches and Switchgear
  16. Sunshades & Windscreens
  17. Interior Trim & Accessories
Lighting
  1. Euro Clear Turn Signals, Parking Lights, & Tail Lights
  2. Turn Signals / Parking Lights
  3. Angel Eye Headlight Conversions
  4. Bulbs for Headlights, Turn Signals and Tail Lights
  5. Headlights, Headlight Lenses, & Headlight Parts
  6. Fog Lights, Fog Light Lenses, & Fog Light Parts
  7. Tail Lights
  8. Stealth Bulbs
Maintenance
  1. Routine Maintenance & Tune-Up Packages
  2. Oil Filters & Oil Filter Kits
  3. Air Filters
  4. Fuel Filters
  5. Cabin Air Filters, Heppa Filters, & Microfilters
  6. Transmission Filter Kits & Transmission Service Parts
  7. Distributor Caps & Rotors
  8. Ignition Coils
  9. Ignition Wires / Spark Plug Wires
  10. Spark Plugs
  11. Bentley Repair / Service Manuals
  12. Service Reset Tools & Fault Code Readers
  13. Anti-Freeze and Coolant
  14. Engine Oils - Genuine BMW and OEM
  15. Power Steering and Hydraulic Fluids
  16. Transmission and Gear Oil - Genuine BMW and OEM
  17. MOTUL Engine Oil and Gear Lubricants
  18. Red Line Oil & Fluids
  19. Liqui-Moly Oil and Additives
Suspension
  1. Shocks & Struts
  2. H&R Performance Springs
  3. Dinan Performance Springs
  4. H&R Cup Kit Shock & Spring Packages
  5. Spring & Shock Packages
  6. Dinan Coilover Spring Kits
  7. Turner / H&R Height Adjustable Spring Sets
  8. Bilstein PSS PSS9 PSS10 Coil Over Suspensions
  9. H&R Coil Over Suspensions
  10. KW Coil Over Suspensions
  11. Moton Coil Overs & Race Shocks
  12. ST Suspension Coilover Kits
  13. Turner Motorsport TrackSport Coil-Over Suspension Kits
  14. Turner Motorsport Racing Suspension Kits
  15. TC Kline Racing Coil Overs
  16. Chassis Reinforcement Kits & Parts
  17. Sway Bar Kits
  18. Sway Bar Links & Sway Bar Parts
  19. Camber / Caster Kits
  20. Strut Braces & Stress Bars
  21. Control Arm Replacements & Upgrades
  22. Suspension Bushings & Mounts
  23. Wheel Bearings & Hub Assemblies
  24. Steering Racks & Power Steering Pumps
  25. Tie Rods & Steering Parts
  26. Coil Over Spring Hardware
  27. CATuned Coilover Kits
  28. AC Schnitzer Suspension Kits
  29. Sachs Performance Coil Over Suspension
  30. AST Suspension
Wheels
  1. Apex Flow Formed Alloy Wheels
  2. Forgeline Custom Forged Alloy Wheels
  3. HRE FlowForm Performance Alloy Wheels
  4. Vorsteiner Wheels
  5. Rohana Wheels
  6. D Force Flow Formed Alloy Wheels
  7. Dinan Performance Wheels
  8. Alpina Alloy Wheels
  9. Original BMW Wheels and Wheel Upgrades
  10. Turner Motorsport Wheel Spacers
  11. ECS Tuning Wheel Spacers
  12. H&R Wheel Spacers
  13. Wheel Bolts, Wheel Studs and Nuts
  14. Wheel Emblems, Caps, and Accessories
  15. High Performance Wheels
Tools
  1. Alignment Tools
  2. Battery Chargers and Tenders
  3. Brake Tools
  4. Clutch Alignment Tools
  5. Coil Over Wrenches
  6. Cooling System Tools
  7. Cylinder Head and VANOS Tools
  8. Exhaust Tools
  9. Fan and Fan Clutch Tools
  10. Fault Code Readers and OBD Scan Tools
  11. Fuel System Tools
  12. Genuine BMW Tool Kits
  13. Oil Service Tools
  14. Sockets
  15. Spark Plug Sockets
  16. Transmission and Differential Tools
  17. Wheel Pin Tools
  18. Workshop Chemicals
Clearance
Choose BMW
BMW 1 Series
  1. (E82) 1-series Coupe 2008+
  2. (E88) 1-series Convertible 2008+
BMW 2 Series
  1. (F22) 2-Series Coupe 2014+
  2. (F23) 2-Series Convertible 2014+
  3. (F87) M2 2016+
BMW 3 Series
  1. (E21) 3-Series 1977-1983
  2. (E30) 3-series 1984-1991
  3. (E30) M3 1988-1991
  4. (E36) 3-series 1992-1999
  5. (E36) M3 1995-1999
  6. (E46) 3-Series 1999-2005
  7. (E46) M3 2001-2006
  8. (E90) 3-Series Sedan 2006-2011
  9. (E90) M3 Sedan 2008-2013
  10. (E91) 3-Series Touring 2006-2013
  11. (E92) 3-Series Coupe 2007-2013
  12. (E92) M3 Coupe 2008-2013
  13. (E93) 3-Series Convertible 2007-2013
  14. (E93) M3 Convertible 2008-2013
  15. (F30) 3-Series Sedan 2012+
  16. (F31) 3-Series Touring 2014+
  17. (F80) M3 2015+
  18. (F34) 3-Series Gran Turismo 2014+
BMW 4 Series
  1. (F32) 4-Series Coupe 2014+
  2. (F33) 4-Series Convertible 2015+
  3. (F34) 4-Series Gran Turismo 2014+
  4. (F82) M4 Coupe 2015+
  5. (F83) M4 Convertible 2015+
  6. (F36) 4-Series Gran Coupe 2015+
BMW 5 Series
  1. (E34) M5 1991-1993
  2. (E39) M5 2000-2003
  3. (E60) M5 2006-2010
  4. (E28) 5-Series 1982-1988
  5. (E34) 5-Series 1989-1995
  6. (E39) 5-Series 1996-2003
  7. (E60) 5-Series Sedan 2004-2010
  8. (E61) 5-Series Touring 2006-2010
  9. (F10) 5-Series 2011+
  10. (G30) 5-Series 2017+
BMW 6 Series
  1. (E24) 6-Series 1977-1989
  2. (E63) 6-Series Coupe 2004-2010
  3. (E64) 6-Series Convertible 2004-2010
  4. (F06) 6-Series Gran Coupe 2013+
  5. (F12) 6-Series Coupe 2011+
  6. (F13) 6-Series Convertible 2011+
BMW 7 Series
  1. (E32) 7-Series 1988-1994
  2. (E38) 7-Series 1995-2001
  3. (E65) 7-Series SWB 2002-2007
  4. (E66) 7-Series LWB 2002-2007
  5. (F01) 7-Series SWB 2009+
  6. (F02) 7-Series LWB 2009+
BMW 8 Series BMW Classics (E9, Bavaria, Isetta, etc)
  1. 2500
  2. 2800
  3. 3.0Si
  4. Bavaria
  5. 2800CS
  6. 3.0CS
  7. 2002
  8. 2002tii
  9. (E12) 528i 1977-1981
  10. (E12) 530i 1975-1978
BMW X Series (SAV)
  1. (E84) X1 Series 2013+
  2. (E83) X3 2004-2010
  3. (F25) X3 2011+
  4. (F26) X4 2015+
  5. (E53) X5 2000-2006
  6. (E70) X5 2007-2013
  7. (F15) X5 2014+
  8. (F85) X5 M 2015+
  9. (E71) X6 2008+
  10. (F16) X6 2015+
  11. (F86) X6 M 2015+
  12. (F48) X1 2016+
  13. (F48) X1 (2016+)
BMW Z Series
  1. (E36/7) Z3 1997-2002
  2. (E85) Z4 M Roadster
  3. (E85/E86/E89) Z4 2003+
  4. (E86) Z4 M Coupe
  5. (E52) Z8 2000-2003
BMW 1600-2002 / tii BMW i Series
  1. (I01) BMW i3 2014+
  2. (I12) BMW i8 2014+
MINI Cooper and Cooper S
Racing
Racing Home Racing News Racing Schedule Racing Photo Gallery
Gallery
Photo Gallery Wallpaper Project Cars
  1. Project i8
  2. Project F80 M3
  3. Turner F82 M4
  4. Turner X5 M
  5. Turner F22 2 Series
  6. Turner F13 M6
  7. Turner F10 M5
  8. Turner F30 335i
  9. Turner E9X M3
  10. Turner E92 335i
  11. Turner E82 1 Series
  12. Turner ActiveE (100% Electric)
  13. Turner E46 M3
  14. Turner E46 330i ZHP
  15. Turner E36 M3
  16. Turner E30 M3
  17. Turner MINI Cooper S
  18. McLaren F1
  19. Turner E92 M3 Lime Rock
  20. Turner F80 M3 Silverstone
Video Gallery
Projects
Turner BMW i8 Turner BMW F80 M3 Turner BMW F82 M4 Turner BMW X5 M Turner BMW F22 2 Series Turner BMW F13 M6 Turner BMW F10 M5 Turner BMW F30 335i Turner BMW E9X M3 Turner BMW E92 335i Turner BMW E82 1 Series Turner BMW ActiveE (100% Electric) Turner BMW E46 M3 Turner BMW E46 330i ZHP Turner BMW E36 M3 Turner BMW E30 M3 Turner MINI Cooper S McLaren F1 Turner BMW E92 M3 Lime Rock Turner BMW F80 M3 Silverstone
About Us
About Turner Motorsport Customer Feedback The Turner Team
  1. Open Positions
Returns Policy Shipping Info Contact Us Privacy Policy Security Policy FAQs
Search Filters
Select a chassis to narrow your results:
Or
For accurate results, specify your model below.
Search Criteria
Sort by: Items per page: Include Used/Clearance:
Product Results
Error
The following search results are not matched to your selected vehicle, or do not have vehicle applications associated with them. For fitment verification please call or email our sales team at 1-800-280-6966 or info@turnermotorsport.com.
Turner Motorsport 3" High-Flow Catted Downpipes - E9x 335i, 335is, E82/88 135i, 1M (N54)
Turner Motorsport
Part Number: 000932TMS

Factory downpipes and their catalysts are a choke point for exhaust gases. This restriction slows turbocharger spool and reduces efficiency, and has a significant impact on power. When modifying their N54, most enthusiasts quickly find OEM downpipes offer insufficient performance as power levels are increased, resulting in disappointing results from other modifications. While some find catless downpipes to be the answer, their benefits are increasingly failing to outweigh the downsides when used on the street. Exhaust volume is increased (combined with a full exhaust may be too much for sensitive ears), check engine lights are frequently illuminated, and emissions are greatly increased (a problem for the environment and in passing emissions testing).

Turner engineers designed downpipes that met a happy compromise - excellent flow with high performance 48-state legal catalytic converters. By utilizing cats, these downpipes offer much lower emissions than catless products (and in many cases, no check engine light), with little sacrifice to performance versus their catless counterparts. These high-flow units feature a 3" inlet, followed by a series of smooth radius bends and efficient catalyst, exits as a 2.5" to retain compatibility with popular cat-back exhausts (as well as factory exhaust piping).

We confirmed power and efficiency improvements are present on both a stock tune with even greater power to be found versus factory downpipes while utilizing a simple ECU tune. These gains were confirmed on our in-house Mustang AWD-500 dynamometer while running an off-the-shelf (no tuning trickery in these numbers) Cobb Stage 1 tune:

Stock downpipes wheel horsepower: 314hp @ 5700rpm
Stock downpipes wheel torque: 386ft/lb @ 4000rpm

Turner downpipe wheel horsepower: 334hp @ 6000rpm
Turner downpipe wheel torque: 390ft/lb @ 4100rpm

Max gains:
36hp
 @ 6500rpm
23ft/lb @ 6000rpm

Product features:

  • Large diameter 3" tubing and 200 cell high-flow catalytic converters - significantly reducing flow restriction found on factory downpipes
  • 304 stainless steel with beautiful quality TIG welds
  • Precise fitment - no wrestling to install, listening to clunks, or feeling vibration associated with ill-fitting downpipes
  • Uses factory clamp 11657620508 and factory gaskets 18307553601 (x2) and 18307553603 (x2). Install kit available here


Looking for even more power? Our knowledgeable sales staff is eager to help with your build - give us a call.
 

This item fits the following left-hand-drive BMWs with the N54 engine:
2008-2010 E82 BMW 135i 1M Coupe
2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2010 E93 BMW 335i - Convertible

 

Turner Spherical Monoball Thrust Arm Bearing Set - E39 540i, M5, E38 740/750, E83 X3, E53 X5
Turner Motorsport
Part Number: 022012TMS01

BMW’s are known to have failure prone front thrust arm bushings.  The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change.  This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience.  Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. 

For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available!  Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011).  We wanted to offer E31, E32, E34, E38, E39, E53, E60, E63, E64, and E83 owners similar levels of handling precision and control for the track and street. 

The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise.  We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting.  The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment.  What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.

In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.

We offer these thrust arms with the monoball bushings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms.

Features:

Bearing housing

  • Precision CNC machined from 6061-T6 blue anodized aluminum
  • Knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands.
  • CNC machined 304ss ball joint sleeve inserts, providing a precision fit between the ball joint and the subframe. 

Bearing

  • OEM BMW sealed and greased ball joint for exceptional durability and service life.

Performance

  • Nearly instantaneous, crisp steering and braking response.
  • Maintenance free, long lasting performance. 
  • Improved road feel without undesirable NVH.


This item is an upgrade to the following BMWs: 
2004-2010 E83 X3 X3 2.5i, X3 3.0i, X3 3.0si, X3 xDrive30i
2000-2006 E53 X5 X5 3.0I, X5 4.4i, X5 4.6is, X5 4.8is
1997-2003 E39 5 series 540i, 540iT (sedans and touring wagon) 
2000-2003 E39 M5 sedan 
1995-2001 E38 7 series 740i, 740iL 
1995-2001 E38 7 series 750i, 750iL 

 

Qty
$199.96
$249.95 (Sale - Save 20%)
In Stock
Free Shipping Free Shipping
Add to Wish List
Turner Spherical Monoball Thrust Arm Bearing Set - E39 525i, 528i, 530i
Turner Motorsport
Part Number: 022013TMS02

BMW’s are known to have failure prone front thrust arm bushings.  The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change.  This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience.  Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. 

For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available!  Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011).  We wanted to offer E31, E32, E34, E38, E39, E53, E60, E63, E64, and E83 owners similar levels of handling precision and control for the track and street. 

The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise.  We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting.  The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment.  What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.

In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.

We offer these thrust arms with the monoball bushings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms.

Features:

Bearing housing

  • Precision CNC machined from 6061-T6 blue anodized aluminum
  • Knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands.
  • CNC machined 304ss ball joint sleeve inserts, providing a precision fit between the ball joint and the subframe. 

Bearing

  • OEM BMW sealed and greased ball joint for exceptional durability and service life.

Performance

  • Nearly instantaneous, crisp steering and braking response.
  • Maintenance free, long lasting performance. 
  • Improved road feel without undesirable NVH.

This item is an upgrade to the following BMWs: 
1997-2003 E39 5 Series BMW 525i 525i Wagon 528i 528i Wagon 530i 530i Wagon 
2000-2003 E52 Z8 Convertible BMW Z8 Z8 Alpina 

Qty
$174.97
$249.95 (Sale - Save 30%)
In Stock
Free Shipping Free Shipping
Add to Wish List
Turner Spherical Monoball Thrust Arm Bearing Set - E31, E34, E32
Turner Motorsport
Part Number: 022013TMS01

BMW’s are known to have failure prone front thrust arm bushings.  The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change.  This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience.  Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. 

For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available!  Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011).  We wanted to offer E31, E32, E34, E38, E39, E53, E60, E63, E64, and E83 owners similar levels of handling precision and control for the track and street. 

The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise.  We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting.  The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment.  What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.

In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.

We offer these thrust arms with the monoball bushings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms.

Features:

Bearing housing

  • Precision CNC machined from 6061-T6 blue anodized aluminum
  • Knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands.
  • CNC machined 304ss ball joint sleeve inserts, providing a precision fit between the ball joint and the subframe. 

Bearing

  • OEM BMW sealed and greased ball joint for exceptional durability and service life.

Performance

  • Nearly instantaneous, crisp steering and braking response.
  • Maintenance free, long lasting performance. 
  • Improved road feel without undesirable NVH.

This item is an upgrade to the following BMWs: 
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1989-1995 E34 BMW 525i 530i 535i 540i M5 
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi

Qty
$174.97
$249.95 (Sale - Save 30%)
In Stock
Free Shipping Free Shipping
Add to Wish List
Turner Spherical Monoball Thrust Arm Bearing Set - E60, E61, E63, E64
Turner Motorsport
Part Number: 022014TMS01

BMW’s are known to have failure prone front thrust arm bushings.  The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change.  This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience.  Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. 

For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available!  Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011).  We wanted to offer E31, E32, E34, E38, E39, E53, E60, E63, E64, and E83 owners similar levels of handling precision and control for the track and street. 

The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise.  We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting.  The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment.  What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.

In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.

We offer these thrust arms with the monoball bushings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms.

Features:

Bearing housing

  • Precision CNC machined from 6061-T6 blue anodized aluminum
  • Knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands.
  • CNC machined 304ss ball joint sleeve inserts, providing a precision fit between the ball joint and the subframe. 

Bearing

  • OEM BMW sealed and greased ball joint for exceptional durability and service life.

Performance

  • Nearly instantaneous, crisp steering and braking response.
  • Maintenance free, long lasting performance. 
  • Improved road feel without undesirable NVH.

This item is an upgrade to the following rear-wheel drive BMWs: 

2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i M5
2004-2011 E63/E64 BMW 645ci 650i M6

 

Qty
$199.96
$249.95 (Sale - Save 20%)
In Stock
Free Shipping Free Shipping
Add to Wish List
Turner Spherical Monoball Thrust Arm Bearing Upgrade - Pre-installed - E39 540i, E39 M5
Turner Motorsport
Part Number: 022012TMSE39KT

BMW’s are known to have failure prone front thrust arm bushings.  The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change.  This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience.  Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. 

For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available!  Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011).  We wanted to offer E31, E32, E34, E38, E39, E53, E60, E63, E64, and E83 owners similar levels of handling precision and control for the track and street. 

The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise.  We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting.  The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment.  What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.

In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.

We offer these thrust arms with the monoball bushings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms.

Features:

Bearing housing

  • Precision CNC machined from 6061-T6 blue anodized aluminum
  • Knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands.
  • CNC machined 304ss ball joint sleeve inserts, providing a precision fit between the ball joint and the subframe. 

Bearing

  • OEM BMW sealed and greased ball joint for exceptional durability and service life.

Performance

  • Nearly instantaneous, crisp steering and braking response.
  • Maintenance free, long lasting performance. 
  • Improved road feel without undesirable NVH.


This item is an upgrade to the following rear wheel drive BMWs: 
1997-2003 E39 540i Sedan & Touring
2000-2003 E39 M5

Turner Spherical Monoball Thrust Arm Bearing Upgrade - Pre-Installed - E39 525i, 528i, 530i
Turner Motorsport
Part Number: 022013TMSE39KT

BMW’s are known to have failure prone front thrust arm bushings.  The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change.  This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience.  Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. 

For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available!  Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011).  We wanted to offer E31, E32, E34, E38, E39, E53, E60, E63, E64, and E83 owners similar levels of handling precision and control for the track and street. 

The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise.  We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting.  The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment.  What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.

In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.

We offer these thrust arms with the monoball bushings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms.

Features:

Bearing housing

  • Precision CNC machined from 6061-T6 blue anodized aluminum
  • Knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands.
  • CNC machined 304ss ball joint sleeve inserts, providing a precision fit between the ball joint and the subframe. 

Bearing

  • OEM BMW sealed and greased ball joint for exceptional durability and service life.

Performance

  • Nearly instantaneous, crisp steering and braking response.
  • Maintenance free, long lasting performance. 
  • Improved road feel without undesirable NVH.

This item is an upgrade to the following BMWs: 
1997-2003 E39 5 Series BMW 525i 525i Wagon 528i 528i Wagon 530i 530i Wagon 
2000-2003 E52 Z8 Convertible BMW Z8 Z8 Alpina 

Qty
$359.96
$449.95 (Sale - Save 20%)
Ships in 1 Day
Free Shipping Free Shipping
Add to Wish List
Turner Spherical Monoball Thrust Arm Bearing Upgrade - Pre-Installed - E60, E63, E64
Turner Motorsport
Part Number: 022014TMSE6XKT

BMW’s are known to have failure prone front thrust arm bushings.  The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change.  This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience.  Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. 

For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available!  Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011).  We wanted to offer E31, E32, E34, E38, E39, E53, E60, E63, E64, and E83 owners similar levels of handling precision and control for the track and street. 

The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise.  We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting.  The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment.  What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.

In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.

We offer these thrust arms with the monoball bushings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms.

Features:

Bearing housing

  • Precision CNC machined from 6061-T6 blue anodized aluminum
  • Knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands.
  • CNC machined 304ss ball joint sleeve inserts, providing a precision fit between the ball joint and the subframe. 

Bearing

  • OEM BMW sealed and greased ball joint for exceptional durability and service life.

Performance

  • Nearly instantaneous, crisp steering and braking response.
  • Maintenance free, long lasting performance. 
  • Improved road feel without undesirable NVH.

Sold as a pair for RWD models only.
 

This item is an upgrade to the following BMWs: 

2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i M5
2004-2011 E63/E64 BMW 645ci 650i M6

Qty
$449.96
$499.95 (Sale - Save 10%)
In Stock
Free Shipping Free Shipping
Add to Wish List
Turner Spherical Monoball Thrust Arm Bearing Upgrade - Pre-Installed - E38
Turner Motorsport
Part Number: 022012TMS09KT

BMW’s are known to have failure prone front thrust arm bushings.  The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change.  This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience.  Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. 

For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available!  Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011).  We wanted to offer E31, E32, E34, E38, E39, E53, E60, E63, E64, and E83 owners similar levels of handling precision and control for the track and street. 

The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise.  We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting.  The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment.  What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.

In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.

We offer these thrust arms with the monoball bushings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms.

Features:

Bearing housing

  • Precision CNC machined from 6061-T6 blue anodized aluminum
  • Knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands.
  • CNC machined 304ss ball joint sleeve inserts, providing a precision fit between the ball joint and the subframe. 

Bearing

  • OEM BMW sealed and greased ball joint for exceptional durability and service life.

Performance

  • Nearly instantaneous, crisp steering and braking response.
  • Maintenance free, long lasting performance. 
  • Improved road feel without undesirable NVH.

This item is an upgrade to the following BMWs: 
1995-2001 E38 BMW 740i, 740iL 
1995-2001 E38 BMW 750i, 750iL 

Qty
$359.96
$449.95 (Sale - Save 20%)
In Stock
Free Shipping Free Shipping
Add to Wish List
Turner Spherical Monoball Thrust Arm Bearing Upgrade - Pre-Installed - E83 X3 2.5i, 3.0i, 3.0si
Turner Motorsport
Part Number: 022012TMS11KT

BMW’s are known to have failure prone front thrust arm bushings.  The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change.  This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience.  Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. 

For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available!  Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011).  We wanted to offer E31, E32, E34, E38, E39, E53, E60, E63, E64, and E83 owners similar levels of handling precision and control for the track and street. 

The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise.  We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting.  The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment.  What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.

In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.

We offer these thrust arms with the monoball bushings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms.

Features:

Bearing housing

  • Precision CNC machined from 6061-T6 blue anodized aluminum
  • Knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands.
  • CNC machined 304ss ball joint sleeve inserts, providing a precision fit between the ball joint and the subframe. 

Bearing

  • OEM BMW sealed and greased ball joint for exceptional durability and service life.

Performance

  • Nearly instantaneous, crisp steering and braking response.
  • Maintenance free, long lasting performance. 
  • Improved road feel without undesirable NVH.

This item is an upgrade to the following BMWs: 
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si 

 

Turner Spherical Monoball Thrust Arm Bearing Upgrade - Pre-Installed - E34
Turner Motorsport
Part Number: 022013TMSE34KT

BMW’s are known to have failure prone front thrust arm bushings.  The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change.  This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience.  Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. 

For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available!  Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011).  We wanted to offer E31, E32, E34, E38, E39, E53, E60, E63, E64, and E83 owners similar levels of handling precision and control for the track and street. 

The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise.  We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting.  The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment.  What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.

In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.

We offer these thrust arms with the monoball bushings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms.

Features:

Bearing housing

  • Precision CNC machined from 6061-T6 blue anodized aluminum
  • Knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands.
  • CNC machined 304ss ball joint sleeve inserts, providing a precision fit between the ball joint and the subframe. 

Bearing

  • OEM BMW sealed and greased ball joint for exceptional durability and service life.

Performance

  • Nearly instantaneous, crisp steering and braking response.
  • Maintenance free, long lasting performance. 
  • Improved road feel without undesirable NVH.

This item is an upgrade to the following rear wheel drive BMWs: 
1989-1995 E34 BMW 525i 530i 535i 540i M5 

 

Qty
$359.96
$449.95 (Sale - Save 20%)
Ships on Feb 8, 2018
Free Shipping Free Shipping
Add to Wish List
Turner Spherical Monoball Thrust Arm Bearing Upgrade - Pre-Installed - E31
Turner Motorsport
Part Number: 022013TMS02KT

BMW’s are known to have failure prone front thrust arm bushings.  The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change.  This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience.  Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. 

For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available!  Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011).  We wanted to offer E31, E32, E34, E38, E39, E53, E60, E63, E64, and E83 owners similar levels of handling precision and control for the track and street. 

The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise.  We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting.  The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment.  What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.

In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.

We offer these thrust arms with the monoball bushings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms.

Features:

Bearing housing

  • Precision CNC machined from 6061-T6 blue anodized aluminum
  • Knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands.
  • CNC machined 304ss ball joint sleeve inserts, providing a precision fit between the ball joint and the subframe. 

Bearing

  • OEM BMW sealed and greased ball joint for exceptional durability and service life.

Performance

  • Nearly instantaneous, crisp steering and braking response.
  • Maintenance free, long lasting performance. 
  • Improved road feel without undesirable NVH.

This item is an upgrade to the following rear wheel drive BMWs: 
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi 

Qty
$359.96
$449.95 (Sale - Save 20%)
In Stock
Free Shipping Free Shipping
Add to Wish List
Turner Motorsport Thrust Arm Monoball Upgrade - Pre-Installed - E32
Turner Motorsport
Part Number: 022013TMS03KT

BMW’s are known to have failure prone front thrust arm bushings.  The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change.  This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience.  Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. 

For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available!  Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011).  We wanted to offer E31, E32, E34, E38, E39, E53, E60, E63, E64, and E83 owners similar levels of handling precision and control for the track and street. 

The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise.  We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting.  The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment.  What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.

In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.

We offer these thrust arms with the monoball bushings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms.

Features:

Bearing housing

  • Precision CNC machined from 6061-T6 blue anodized aluminum
  • Knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands.
  • CNC machined 304ss ball joint sleeve inserts, providing a precision fit between the ball joint and the subframe. 

Bearing

  • OEM BMW sealed and greased ball joint for exceptional durability and service life.

Performance

  • Nearly instantaneous, crisp steering and braking response.
  • Maintenance free, long lasting performance. 
  • Improved road feel without undesirable NVH.


This item is an upgrade to the following rear wheel drive BMWs: 
1988-1994 E32 BMW 735i 735il 740i 740il 750il

Qty
$359.96
$449.95 (Sale - Save 20%)
Ships in 6 days
Free Shipping Free Shipping
Add to Wish List
Turner Build Your Own Catch Can Kit
Turner Motorsport
Part Number: 022798TMS

There are a few reason having a catch can is an upgrade for a vehicle, from a separator system that no longer works to one that was never there. Modern day emissions regulations require the use of a closed crankcase ventilation (PCV) system to recirculate combustion blow-by gases from the crankcase back in to the intake to be burned.  Unfortunately, these blow by gases contain water vapor (which is a byproduct of combustion) and pick up oil mist from and the windage cloud and cam lubrication system as they travel through the crank case.  Due to less than 100% effective air/oil separation in the stock PCV system, some oil mist and water vapor gets carried back to the intake tract and over time cause oil deposits and carbon buildup in the intake manifold, intake ports, and on the back of intake valves.  All will eventually lead to poor performance and reduced fuel economy, and the presence oil mist can in the intake charge even increase the risk of engine damaging detonation. 

 The catch can utilizes a strategically designed 4 chamber baffle plate system engineered to create multiple changes in the direction of airflow to cause oil droplets to fall out of suspension, maximizing the efficiency of the PCV air/oil separation.  A dipstick is integrated into the cap so you can monitor the oil level, and the can is easily serviced.  At each oil change simply unscrew the canister and empty the trapped oil with your regular used oil.  The Turner Motorsport Oil Catch Can is CNC machined from billet 6061-T6 aluminum and with a stealthy black anodized finish for lasting durability and appearance, and includes everything needed for an OEM-like fully reversible installation. Another feature the Turner catch can has is the ability to add on a drain kit so you no longer have to fumble around getting the fill can out of a tight space. The drain can be run down to the belly pan of your car so draining can be done at the same time you change your oil or anytime in between.

* The baffle system is designed to direct the flow clock-wise or counter clock-wise depending on your setup (each can can be adjusted to flow in either direction). 

Features:

  • 6061-T6 billet machined body, anodized black for lasting protection and appearance
  • Strategically positioned 4 chamber baffle system maximizes oil / air separation 
  • Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
  • Sealed with a pre-installed viton O-Ring
  • Includes 2.5mm allen key to remove baffle plates for cleaning
  • Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
  • Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
  • Optional use drain hole - drain kit included!
  • Universal mounting kit

Specific model kits for N54 vehicles can be found here.

Specific model kits for S54 vehicles can be found here.

Qty
Starting At $249.95
Ships on Dec 20, 2017
Free Shipping Free Shipping
Add to Wish List
Front Adjustable Camber/Caster Plates - E46 M3 - Turner Motorsport Hybrid Street/Track
Turner Motorsport
Part Number: 002593TMS04

Building on years of building some of the most used (and talked about!) Street and Race camber plates for the E46 M3 has brought us to the next iteration of this key suspension component. Introducing the Turner Motorsport Hybrid Street/Track Caster/Camber Plate designed exclusively for the E46 M3. 

Front caster/camber plates play a key role in suspension configuration - providing a point to adjust alignment in the front of the vehicle. Without camber plates, it is not possible to dial in proper street and track alignment specifications to maximize handling and tire wear. A properly configured alignment is frequently the difference between a good car and a great car, trailing the pack and pace-setting lap times, frustrating tire wear and long tire life, or exhilarating handling and a car that fights through the turns. 

Understanding the needs of a track enthusiast, our Race camber plates allow for zero deflection and are ideal for a dedicated track vehicle. For a dedicated street vehicle, our Street camber plates are another tried-and-true option that are comfortable and perform very well. Hearing the call from customers that don't fall cleanly into one of these groups, we've designed the best of both worlds - a rebuildable polyurethane-isolated spherical bearing, or as we call it, a "hybrid" design. These camber plates deliver exceptional lifespan, high performance, with excellent road manners. 

We paid extra attention to the bearing we selected, knowing we needed a bearing that would not only be quiet, but reliable. Tens of thousands of street and track miles on a variety of applications yielded zero failures of the high quality PTFE-lined, maintenance-free stainless steel monoball spherical FK bearing. One of our secrets in enabling this high-performance bearing to function to its full potential is the 80a polyurethane isolation bushing. We identified just the right material density to allow for absorption of road noise while allowing dampers to articulate precisely and predictably. This tiny bit of cushion takes the brunt of potholes and rough roads, protecting the bearing from wear which may otherwise lead to premature failure. Equally critical to maximizing bearing life is the addition of dust seals to prevent moisture and dirt contamination.  To top it all off, the entire assembly is rebuildable in the event that, over the years, a component does wear out. 

By re-using the OEM spring perch and radial bearing, we've avoided supporting the weight of the vehicle on the strut shaft monoball - further extending the life of the bearing and mimicking a well-designed factory element. Spring perches for 60mm or 2.5" springs are also available; use of factory-style springs requires no additional perch. Inspect the shocks you plan on using these with, measuring the shock diameter (16mm or 14mm) and inspecting the seat (square or tapered) to ensure you select the correct kit for your application. Not sure which you need? Give us a call, we're happy to help. 

  • Adjustable camber (3+ degrees of adjustment) and caster (2.5+ degrees of adjustment) without removing strut from the vehicle
  • Wide plate assembly offers excellent load distribution to address concerns with strut tower deformation
  • Compatible with factory-style springs, or with the addition of available 60mm or 2.5" perches, race-style springs as well
  • Maintenance free, PTFE lined, stainless steel monoball spherical bearing for full shaft articulation
  • 80A polyurethane isolation bushings for noise, vibration, and harshness (NVH) control
  • Rebuildable bushing/bearing assembly with individually replaceable components

Turner Motorsport Hybrid Street/Track Camber Plates: content on the street, ready to rip on the track.

Click here for installation instructions.

This item fits the following BMWs:
2001-2006 E46 BMW M3

Turner offset Polyurethane Front Control Arm Bushing - 95A - Pre-Installed In Brackets - E36, Z3, E30
Turner Motorsport
Part Number: 012633TMS02-04KT

 

Here at Turner we understand the importance of an upgrade that will get the results you need on the track and still be tolerable on the drive around town. When it comes to control arms on the track, making them as stiff as you can (usually using solid mounts) is the best way to increase your driving precision by eliminating the deflection of rubber. The next best thing to create a balance would be to stiffen up the control arm with polyurethane, giving you the option of a more stock like feel with 80a or closer to the solid feel with 95a durometers.

When it comes to the E36 chassis you also get the options of choosing a stock centered design or going with the E30 inspired offset bushing to increase castor, further taking advantage of improvd handling. These poly bushings will give your control arms a direct connection between your suspension and the body of the car eliminating the slop felt under take-off and braking so you feel more in control of your vehicle. 

This item fits the following BMWs that use a centered-style bushing: 

1984-1991 E30 BMW 318i, 318is, 325, 325e, 325es, 325i, 325is 
1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
1996-1999 E36 BMW M3 S52
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i MZ3 M Coupe M Roadster 

Turner Offset Polyurethane Front Control Arm Bushing - 95A - E36, Z3, E30
Turner Motorsport
Part Number: 012633TMS02-02

Here at Turner we understand the importance of an upgrade that will get the results you need on the track and still be tolerable on the drive around town. When it comes to control arms on the track, making them as stiff as you can (usually using solid mounts) is the best way to increase your driving precision by eliminating the deflection of rubber. The next best thing to create a balance would be to stiffen up the control arm with polyurethane, giving you the option of a more stock like feel with 80a or closer to the solid feel with 95a durometers.

When it comes to the E36 chassis you also get the options of choosing a stock centered design or going with the E30 inspired offset bushing to increase castor, further taking advantage of improvd handling. These poly bushings will give your control arms a direct connection between your suspension and the body of the car eliminating the slop felt under take-off and braking so you feel more in control of your vehicle. 

This item fits the following BMWs that use a centered-style bushing: 

1984-1991 E30 BMW 318i, 318is, 325, 325e, 325es, 325i, 325is 
1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
1996-1999 E36 BMW M3 S52
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i MZ3 M Coupe M Roadster 

Turner offset Polyurethane Front Control Arm Bushing - 80A - Pre-Installed In Brackets - E36, Z3, E30
Turner Motorsport
Part Number: 012633TMS02-03

Here at Turner we understand the importance of an upgrade that will get the results you need on the track and still be tolerable on the drive around town. When it comes to control arms on the track, making them as stiff as you can (usually using solid mounts) is the best way to increase your driving precision by eliminating the deflection of rubber. The next best thing to create a balance would be to stiffen up the control arm with polyurethane, giving you the option of a more stock like feel with 80a or closer to the solid feel with 95a durometers.

When it comes to the E36 chassis you also get the options of choosing a stock centered design or going with the E30 inspired offset bushing to increase castor, further taking advantage of improvd handling. These poly bushings will give your control arms a direct connection between your suspension and the body of the car eliminating the slop felt under take-off and braking so you feel more in control of your vehicle.

This item fits the following BMWs that use a centered-style bushing: 

1984-1991 E30 BMW 318i, 318is, 325, 325e, 325es, 325i, 325is 
1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
1996-1999 E36 BMW M3 S52
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i MZ3 M Coupe M Roadster 

Turner Motorsport Polyurethane Front Control Arm Bushings - 95A - Pre-Installed In Brackets - E46 M3
Turner Motorsport
Part Number: 020351TMS01-04

Here at Turner we understand the importance of an upgrade that will get the results you need on the track and still be tolerable on the drive around town. When it comes to control arms on the track, making them as stiff as you can (usually using solid mounts) is the best way to increase your driving precision by eliminating the deflection of rubber. The next best thing to create a balance would be to stiffen up the control arm with polyurethane, giving you the option of a more stock like feel with 80a or closer to the solid feel with 95a durometers. These poly bushings will give your control arms a direct connection between your suspension and the body of the car eliminating the slop felt under take-off and braking so you feel more in control of your vehicle. 

Already pressed into bracket so you can get right to the install.

*Featuring a delrin sleeve to eliminate heat deformation and premature failure.

 

This item fits the following BMWs that use a centered-style bushing: 

2001-2006 E46 BMW M3 

Turner Offset Polyurethane Front Control Arm Bushing - 80A - E36, Z3, E30
Turner Motorsport
Part Number: 012633TMS02-01

Here at Turner we understand the importance of an upgrade that will get the results you need on the track and still be tolerable on the drive around town. When it comes to control arms on the track, making them as stiff as you can (usually using solid mounts) is the best way to increase your driving precision by eliminating the deflection of rubber. The next best thing to create a balance would be to stiffen up the control arm with polyurethane, giving you the option of a more stock like feel with 80a or closer to the solid feel with 95a durometers.

When it comes to the E36 chassis you also get the options of choosing a stock centered design or going with the E30 inspired offset bushing to increase castor, further taking advantage of improvd handling. These poly bushings will give your control arms a direct connection between your suspension and the body of the car eliminating the slop felt under take-off and braking so you feel more in control of your vehicle.

This item fits the following BMWs that use a centered-style bushing: 

1984-1991 E30 BMW 318i, 318is, 325, 325e, 325es, 325i, 325is 
1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
1996-1999 E36 BMW M3 S52
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i MZ3 M Coupe M Roadster 

 

Turner Centered Polyurethane Front Control Arm Bushing - 80A - Pre-Installed In Brackets - E36, Z3, E30
Turner Motorsport
Part Number: 012633TMS01-03KT

Here at Turner we understand the importance of an upgrade that will get the results you need on the track and still be tolerable on the drive around town. When it comes to control arms on the track, making them as stiff as you can (usually using solid mounts) is the best way to increase your driving precision by eliminating the deflection of rubber. The next best thing to create a balance would be to stiffen up the control arm with polyurethane, giving you the option of a more stock like feel with 80a or closer to the solid feel with 95a durometers.

When it comes to the E36 chassis you also get the options of choosing a stock centered design or going with the E30 inspired offset bushing to increase castor, further taking advantage of improvd handling. These poly bushings will give your control arms a direct connection between your suspension and the body of the car eliminating the slop felt under take-off and braking so you feel more in control of your vehicle. 

This item fits the following BMWs that use a centered-style bushing: 

1984-1991 E30 BMW 318i, 318is, 325, 325e, 325es, 325i, 325is 
1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
1996-1999 E36 BMW M3 S52
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i MZ3 M Coupe M Roadster 

Turner Motorsport Polyurethane Front Control Arm Bushings - 80A - Pre-Installed In Brackets
Turner Motorsport
Part Number: 020351TMS01-03

Here at Turner we understand the importance of an upgrade that will get the results you need on the track and still be tolerable on the drive around town. When it comes to control arms on the track, making them as stiff as you can (usually using solid mounts) is the best way to increase your driving precision by eliminating the deflection of rubber. The next best thing to create a balance would be to stiffen up the control arm with polyurethane, giving you the option of a more stock like feel with 80a or closer to the solid feel with 95a durometers. These poly bushings will give your control arms a direct connection between your suspension and the body of the car eliminating the slop felt under take-off and braking so you feel more in control of your vehicle.

Already pressed into bracket so you can get right to the install.

*Featuring a delrin sleeve to eliminate heat deformation and premature failure.

This item fits the following BMWs that use a centered-style bushing: 

2001-2006 E46 BMW M3 

Qty
$139.95
In Stock
Free Shipping Eligible Free Shipping
on orders $199 and up
Add to Wish List
Turner Centered Polyurethane Front Control Arm Bushing - 95A - Pre-Installed In Brackets - E36, Z3, E30
Turner Motorsport
Part Number: 012633TMS01-04KT

Here at Turner we understand the importance of an upgrade that will get the results you need on the track and still be tolerable on the drive around town. When it comes to control arms on the track, making them as stiff as you can (usually using solid mounts) is the best way to increase your driving precision by eliminating the deflection of rubber. The next best thing to create a balance would be to stiffen up the control arm with polyurethane, giving you the option of a more stock like feel with 80a or closer to the solid feel with 95a durometers.

When it comes to the E36 chassis you also get the options of choosing a stock centered design or going with the E30 inspired offset bushing to increase castor, further taking advantage of improvd handling. These poly bushings will give your control arms a direct connection between your suspension and the body of the car eliminating the slop felt under take-off and braking so you feel more in control of your vehicle. 

This item fits the following BMWs that use a centered-style bushing: 

1984-1991 E30 BMW 318i, 318is, 325, 325e, 325es, 325i, 325is 
1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
1996-1999 E36 BMW M3 S52
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i MZ3 M Coupe M Roadster 

Turner Motorsport Polyurethane Front Control Arm Bushings - 80A - Pre-Installed In Brackets
Turner Motorsport
Part Number: 013275TMS01-03

Here at Turner we understand the importance of an upgrade that will get the results you need on the track and still be tolerable on the drive around town. When it comes to control arms on the track, making them as stiff as you can (usually using solid mounts) is the best way to increase your driving precision by eliminating the deflection of rubber. The next best thing to create a balance would be to stiffen up the control arm with polyurethane, giving you the option of a more stock like feel with 80a or closer to the solid feel with 95a durometers. These poly bushings will give your control arms a direct connection between your suspension and the body of the car eliminating the slop felt under take-off and braking so you feel more in control of your vehicle. 

This item fits the following BMWs that use a centered-style bushing: 

1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci - not for xi models 
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si 

Qty
$144.95
In Stock
Free Shipping Eligible Free Shipping
on orders $199 and up
Add to Wish List
Turner Motorsport Polyurethane Front Control Arm Bushings - 95A - Pre-Installed In Brackets
Turner Motorsport
Part Number: 013275TMS01-04KT

Here at Turner we understand the importance of an upgrade that will get the results you need on the track and still be tolerable on the drive around town. When it comes to control arms on the track, making them as stiff as you can (usually using solid mounts) is the best way to increase your driving precision by eliminating the deflection of rubber. The next best thing to create a balance would be to stiffen up the control arm with polyurethane, giving you the option of a more stock like feel with 80a or closer to the solid feel with 95a durometers. These poly bushings will give your control arms a direct connection between your suspension and the body of the car eliminating the slop felt under take-off and braking so you feel more in control of your vehicle. 

*Featuring a delrin sleeve to eliminate heat deformation and premature failure.

 

This item fits the following BMWs that use a centered-style bushing: 

1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci - not for xi models 
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si 

Turner Motorsport Polyurethane Front Control Arm Bushings - 95A - E46 M3
Turner Motorsport
Part Number: 020351TMS01-02

Here at Turner we understand the importance of an upgrade that will get the results you need on the track and still be tolerable on the drive around town. When it comes to control arms on the track, making them as stiff as you can (usually using solid mounts) is the best way to increase your driving precision by eliminating the deflection of rubber. The next best thing to create a balance would be to stiffen up the control arm with polyurethane, giving you the option of a more stock like feel with 80a or closer to the solid feel with 95a durometers. These poly bushings will give your control arms a direct connection between your suspension and the body of the car eliminating the slop felt under take-off and braking so you feel more in control of your vehicle. 

*Featuring a delrin sleeve to eliminate heat deformation and premature failure.

 

This item fits the following BMWs that use a centered-style bushing: 

2001-2006 E46 BMW M3 

Turner Motorsport polyurethane Front Control Arm Bushing - 95A - E46, Z4
Turner Motorsport
Part Number: 013275TMS01-02

Here at Turner we understand the importance of an upgrade that will get the results you need on the track and still be tolerable on the drive around town. When it comes to control arms on the track, making them as stiff as you can (usually using solid mounts) is the best way to increase your driving precision by eliminating the deflection of rubber. The next best thing to create a balance would be to stiffen up the control arm with polyurethane, giving you the option of a more stock like feel with 80a or closer to the solid feel with 95a durometers. These poly bushings will give your control arms a direct connection between your suspension and the body of the car eliminating the slop felt under take-off and braking so you feel more in control of your vehicle. 

*Featuring a delrin sleeve to eliminate heat deformation and premature failure.

 

This item fits the following BMWs that use a centered-style bushing: 

1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci - not for xi models 
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si 

Turner Motorsport polyurethane Front Control Arm Bushing - 80A - E46, Z4
Turner Motorsport
Part Number: 013275TMS01-01

Here at Turner we understand the importance of an upgrade that will get the results you need on the track and still be tolerable on the drive around town. When it comes to control arms on the track, making them as stiff as you can (usually using solid mounts) is the best way to increase your driving precision by eliminating the deflection of rubber. The next best thing to create a balance would be to stiffen up the control arm with polyurethane, giving you the option of a more stock like feel with 80a or closer to the solid feel with 95a durometers. These poly bushings will give your control arms a direct connection between your suspension and the body of the car eliminating the slop felt under take-off and braking so you feel more in control of your vehicle. 

This item fits the following BMWs that use a centered-style bushing: 

1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci - not for xi models 
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si 

Turner Motorsport Polyurethane Front Control Arm Bushings - 80A -E46 M3
Turner Motorsport
Part Number: 020351TMS01-01

Here at Turner we understand the importance of an upgrade that will get the results you need on the track and still be tolerable on the drive around town. When it comes to control arms on the track, making them as stiff as you can (usually using solid mounts) is the best way to increase your driving precision by eliminating the deflection of rubber. The next best thing to create a balance would be to stiffen up the control arm with polyurethane, giving you the option of a more stock like feel with 80a or closer to the solid feel with 95a durometers. These poly bushings will give your control arms a direct connection between your suspension and the body of the car eliminating the slop felt under take-off and braking so you feel more in control of your vehicle.

*Featuring a delrin sleeve to eliminate heat deformation and premature failure.

This item fits the following BMWs that use a centered-style bushing: 

2001-2006 E46 BMW M3 

Turner Motorsport Aluminum Skid Plate - E9x M3
Turner Motorsport
Part Number: 021807TMS03

Damaged belly pan? We've been there. Every "thunk" or "scrape" against the factory underbody is cringeworthy. Fear not, M3 owners. At long last, our engineers have boldly addressed an Achilles' heel of this performance beast: the belly pan. The lowest point of the car, the OE belly pan ends up being an easy target for curb stops, inclines, and road (or track) debris. The fiber material used in construction of the factory piece make it lightweight, but at the cost of very limited durability. With delicate engine components being mere inches away (including the oil cooler), our heavy duty skid plate should be on every M3 owner's install list.

After much evaluation and testing, our engineers have designed an especially strong, attractive skid plate while retaining the complex aero features found on the OE belly pan. The center pan is manufactured from 3/16” 5052 aluminum and is connected directly to the frame rails via 1018 steel brackets and a fully-reversible, proprietary fastener system for maximum rigidity. Our design features beefy 1/8" thick aluminum side plates that are perfectly integrated with all factory fender liner mounting locations for a factory fit. With ducting mimicking that of the factory pan, you'll experience factory cooling and aerodynamics, and are even able to re-use your OE rubber ducting trim. 

They say the best offense is a good defense - with that in mind, our skid plate offers improved ground clearance to avoid costly, cringe-worthy, and dangerous impacts in the first place. Despite this, you still make contact? Rest assured, this skid plate is designed for severe duty usage. 

All components are protected using wrinkle black powder coat finish to maintain a sleek appearance and protect against corrosion. Includes new stainless steel hardware.

Installation instruction PDF

Features:

  • 3/16” thick aluminum main plate and 1/8” thick aluminum side plates
  • 1018 powder coated steel tube support braces for maximum skid plate strength
  • Retains factory air duct for oil cooler
  • Maintains wheel liner mounting positions
  • Contains all necessary stainless mounting hardware and components
  • No modification necessary; easy to convert back to stock
  • Made in America!

This performance upgrade is for the following BMWs:
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible

Qty
$599.95
In Stock
Free Shipping Free Shipping
Add to Wish List
Turner Motorsport Skid Plate - Wrinkle Black Powdercoat Finish - F80 M3, F82/83 M4
Turner Motorsport
Part Number: 021491TMS01A-02

Since the F8x M3/M4 was designed to make impressive power in stock form (and loads more with upgrades) these cars feature some heavy duty cooling hardware. In order to keep oil temperatures down (something many late model M cars have struggled with) requires a large oil cooler. BMW engineers positioned the oil cooler quite low under the car, positioned horizontally - an aerodynamic design which creates a vacuum force while driving, drawing heat from the oil cooler. The issue some of the vehicle owners have experienced is road debris from small branches to chunks of ice have impacted the OE belly pan hard enough to crack the oil cooler draining the cars oil rapidly. Being one of the lowest points of the car, even a close encounter with a parking block can mean the end of the road for the factory belly pan - and oil cooler. Damage to the belly pan means reduced cooling, which can result in dangerously high engine temperatures. Once the belly pan is damaged, there is no longer any protection for the oil cooler, meaning damage to the cooler and a catastrophic loss in oil pressure may be right around the corner.

The lightweight Turner skid plate comes in just 3 lbs heavier than stock with a total weight of just 5 lbs - additional poundage that is a valuable addition. Designed using 8 gauge 5052 aluminum, this skid plate offers plenty of strength to protect your oil cooler. We also made sure this would be an easy, reversible upgrade by maintaining OE mounting locations and hardware that requires NO cutting or modification to your vehicle for fitment. Our engineering team also felt it was important to maintain some of the cooling features the BMW engineers spec'd out such as having a trim seal to fit snugly against the cooler edges to create the same vacuum cooling effects as stock.

Features:

  • In-house designed to maintain OE cooling and fitment
  • Manufactured from 8 gauge 5052 aluminum
  • Maintains factory hardware and mounting points
  • No cutting, drilling, or modification required
  • 5 lbs total weight, only 3 lbs more than the plastic OE
  • Made in America!

If new factory hardware is required, use part number 07149126886. 11 required in total to secure this skid plate.

Turner Motorsport Skid Plate - Natural Finish - F80 M3, F82/83 M4
Turner Motorsport
Part Number: 021491TMS01

Since the F8x M3/M4 was designed to make impressive power in stock form (and loads more with upgrades) these cars feature some heavy duty cooling hardware. In order to keep oil temperatures down (something many late model M cars have struggled with) requires a large oil cooler. BMW engineers positioned the oil cooler quite low under the car, positioned horizontally - an aerodynamic design which creates a vacuum force while driving, drawing heat from the oil cooler. The issue some of the vehicle owners have experienced is road debris from small branches to chunks of ice have impacted the OE belly pan hard enough to crack the oil cooler - draining the car's oil rapidly. Being one of the lowest points of the car, even a close encounter with a parking block can mean the end of the road for the factory belly pan - and oil cooler. Damage to the belly pan means reduced cooling, which can result in dangerously high engine temperatures. Once the belly pan is damaged, there is no longer any protection for the oil cooler, meaning damage to the cooler and a catastrophic loss in oil pressure may be right around the corner.

The lightweight Turner skid plate comes in just 3 lbs heavier than stock with a total weight of just 5 lbs - additional poundage that is a valuable addition. Designed using 8 gauge 5052 aluminum, this skid plate offers plenty of strength to protect your oil cooler. We also made sure this would be an easy, reversible upgrade by maintaining OE mounting locations and hardware that requires NO cutting or modification to your vehicle for fitment. Our engineering team also felt it was important to maintain some of the cooling features the BMW engineers spec'd out such as having a trim seal to fit snugly against the cooler edges to create the same vacuum cooling effects as stock.

Features:

  • In-house designed to maintain OE cooling and fitment
  • Manufactured from 8 gauge 5052 aluminum
  • Maintains factory hardware and mounting points
  • No cutting, drilling, or modification required
  • 5 lbs total weight, only 3 lbs more than the plastic OE
  • Made in America!

If new factory hardware is required, use part number 07149126886. 11 required in total to secure this skid plate.

Delrin bumper protection Skid Plates - 11" - E9x M3
Turner Motorsport
Part Number: 013770tms01KT

In an effort to design products that are more appealing to the daily driver we engineered these Delrin protection plates based on our own experience with bumper & splitter damage on our own M3's. The aggressive design of the E9x M3 bumper makes it virtually impossible to not have contact at some point of the bumper, from parking curbs to slight inclines making your bumper or carbon splitters look ugly. 

We decided to use Delrin with our design due to its durable features, the hardness of Delrin will reduce the amount of visible scratches on the surface and giving extra support under high speed driving conditions. Our protection plates are offered to cover both carbon splitters and the bare bumper with an exact fitment and slightly aggressive option for both situations.

*For use with stock bumpers without the carbon fiber splitter upgrade. 

This item fits the following BMWs: 
2008-2011 E90 BMW M3 - Sedan 
2008-2013 E92 BMW M3 - Coupe 
2008-2013 E93 BMW M3 - Convertible 

Qty
$159.95
In Stock
Free Shipping Eligible Free Shipping
on orders $199 and up
Add to Wish List
Delrin bumper protection Skid Plates - 12.5"
Turner Motorsport
Part Number: 013770TMS02KT

In an effort to design products that are more appealing to the daily driver we engineered these Delrin protection plates based on our own experience with bumper & splitter damage on our own M3's. The aggressive design of the E9x M3 bumper makes it virtually impossible to not have contact at some point of the bumper, from parking curbs to slight inclines making your bumper or carbon splitters look ugly. 

We decided to use Delrin with our design due to its durable features, the hardness of Delrin will reduce the amount of visible scratches on the surface and giving extra support under high speed driving conditions. Our protection plates are offered to cover both carbon splitters and the bare bumper with an exact fitment and slightly aggressive option for both situations.

*For use with stock bumpers without the carbon fiber splitter upgrade.

This item fits the following BMWs: 
2008-2011 E90 BMW M3 - Sedan 
2008-2013 E92 BMW M3 - Coupe 
2008-2013 E93 BMW M3 - Convertible 

Qty
$159.95
In Stock
Free Shipping Eligible Free Shipping
on orders $199 and up
Add to Wish List
Delrin Carbon Splitter Skid Plates - 17"
Turner Motorsport
Part Number: 013770TMS03KT

In an effort to design products that are more appealing to the daily driver we engineered these Delrin protection plates based on our own experience with bumper & splitter damage on our own M3's. The aggressive design of the E9x M3 bumper makes it virtually impossible to not have contact at some point of the bumper, from parking curbs to slight inclines making your bumper or carbon splitters look ugly. 

We decided to use Delrin with our design due to its durable features, the hardness of Delrin will reduce the amount of visible scratches on the surface and giving extra support under high speed driving conditions. Our protection plates are offered to cover both carbon splitters and the bare bumper with an exact fitment and slightly aggressive option for both situations.

*For use with the carbon fiber splitter upgrade. 

This item fits the following BMWs: 
2008-2011 E90 BMW M3 - Sedan 
2008-2013 E92 BMW M3 - Coupe 
2008-2013 E93 BMW M3 - Convertible 

Qty
$159.95
In Stock
Free Shipping Eligible Free Shipping
on orders $199 and up
Add to Wish List
Delrin Carbon Splitter Skid Plates - 18.5"
Turner Motorsport
Part Number: 013770TMS04KT

In an effort to design products that are more appealing to the daily driver we engineered these Delrin protection plates based on our own experience with bumper & splitter damage on our own M3's. The aggressive design of the E9x M3 bumper makes it virtually impossible to not have contact at some point of the bumper, from parking curbs to slight inclines making your bumper or carbon splitters look ugly. 

We decided to use Delrin with our design due to its durable features, the hardness of Delrin will reduce the amount of visible scratches on the surface and giving extra support under high speed driving conditions. Our protection plates are offered to cover both carbon splitters and the bare bumper with an exact fitment and slightly aggressive option for both situations.

*For use with the carbon fiber splitter upgrade. 

This item fits the following BMWs: 
2008-2011 E90 BMW M3 - Sedan 
2008-2013 E92 BMW M3 - Coupe 
2008-2013 E93 BMW M3 - Convertible 

Qty
$159.95
In Stock
Free Shipping Eligible Free Shipping
on orders $199 and up
Add to Wish List
Turner Solid Aluminum Subframe Mount Kit - F22 228 230 M235 M240, F3x 320 328 330 335 340
Turner Motorsport
Part Number: 021450TMS01

A BMWs subframe is the heart of the suspension - as the subframe twists and shifts under load all of the suspension mounting points also move. The rear suspension feels loose and lacks precision. As rubber or hydroelastic bushings wear the bushing deflection gets worse. If you have a highly tuned BMW then you're putting even more strain on weak bushings. The solution is a stiffer and more durable material. Even BMW has moved to solid mounts on the F10 M5 and F8X M3/M4. These fully solid F2x/F3x aluminum mounts have zero deflection - the subframe does not move at all. The rest of the suspension can work as designed and maintain the proper alignment and motion ratios. The driver will notice the difference as the car is more stable and the handling is more precise.

Although we designed these for use in our racecars, they can work on the street so long as the driver can tolerate some additional noise, vibration, and harshness - with just these mounts alone, we've found this to be a minimal increase. These mounts are CNC machined in the USA and made with high-grade aluminum. The set is for all four subframe mounts.

 

These solid differential bushings/mounts fit the following BMWs: 
2014+ F22 BMW 228i 228iX M235i M235iX 
2012+ F30 BMW 320i 320iX 328i 328iX 335i 335iX - Sedan 
2014+ F34 BMW 328i 328iX 335iX - Gran Turismo 
2014+ F32 BMW 428i 428iX 435i 435iX - Coupe 
2014+ F33 BMW 428i 428iX 435i 435iX - Convertible

2014+ F36 BMW 428iX -Gran Coupe 

 

Turner Motorsport Thrust Arm Monoball Upgrade - Pre-installed Arms - F22, F23, F30, F32, F33, F36
Turner Motorsport
Part Number: 021440TMS01-02KT

BMW’s are known to have failure prone front thrust arm bushings.  The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change.  This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience.  Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. 

For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available!  Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011).  We wanted to offer E31, E32, E34, E38, E39, E53, E60, E63, E64, and E83 owners similar levels of handling precision and control for the track and street. 

The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise.  We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting.  The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment.  What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.

In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.

We offer these thrust arms with the monoball bushings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms.

Features:

Bearing housing

  • Precision CNC machined from 6061-T6 blue anodized aluminum
  • Knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands.
  • CNC machined 304ss ball joint sleeve inserts, providing a precision fit between the ball joint and the subframe. 

Bearing

  • OEM BMW sealed and greased ball joint for exceptional durability and service life.

Performance

  • Nearly instantaneous, crisp steering and braking response.
  • Maintenance free, long lasting performance. 
  • Improved road feel without undesirable NVH.
Qty
$399.96
$499.95 (Sale - Save 20%)
Ships on Jan 5, 2018
Free Shipping Free Shipping
Add to Wish List
Turner Motorsport Poly Tow Strap With Bolt - Red, Blue, Black - F10, F30, F80, F82, and more
Turner Motorsport
Part Number: 021461TMS

This Polyester tow strap is far and above the best tow strap available for the modern BMW chassis. We use a heavy-duty, chemical-resistant polyester strap webbed around a stainless steel stud. There is plenty of length available for tow hooks to grab onto without hitting your bumper and damaging paint or causing cracks. The precision-cut stud is fits all F- Chassis vehicles. We have further refined the shape and size of the bolt so that spoiler modifications are kept to a minimum. Note that on some models you may need to modify the bumper slightly for the best fit.

A tow strap is a better pickup point than a fixed steel ring, which will add weight and protrude past the bumper. Some racing series have banned the steel rings because they increase the likelihood of contact during close racing. Our straps are sold in bright red, bright blue, or black (red suggested for racing use as it makes it easy for tow truck operators and safety crews to spot). On some models, the strap may be tucked behind the bumper panel when not on track, which makes this perfect for dual-use track/street cars and full racecars alike. Priced per strap so order two for the front and rear.

The 75mm bolt is commonly used with the M bumper designs and the 55mm bolt commonly used for the standard bumper due to the tow hook mounting thread distance behind the cover. The best practice is to measure the distance from the tow hook mounting threads to the outside of the bumper cover.

This item fits the following BMW Chassis: 
E89 Z4,F01,F02,F06,F10,F12,F13,F22,F25,X1,X3,F26 X4,F30,F31,F32,F33,F34,F36,F80,F82,F83,F87*,G30,G31,G11,G12,I01,i3 
*F87 M2 is for front location only

Qty
Starting At $84.96
$99.95 (Sale - Save 15%)
In Stock
Free Shipping Eligible Free Shipping
on orders $199 and up
Add to Wish List
Turner Motorsport Greasable Front Control Arm Monoball Upgrade set (With Brackets) - E30, E36, Z3
Turner Motorsport
Part Number: 019891TMS

Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011).  We wanted to offer e30, e36, and e46 owners similar levels of handling precision and control for the track and street, but weren’t satisfied with the other options out there. Instead of a Delrin® bushing or unsealed spherical bearing alone, we selected an oversized sealed greaseable spherical monoball to offer unparalleled durability and precision, but designed a Delrin® adapter sleeve to help isolate the added noise, vibration, and harshness that a full solid monoball bearing will have. While race-ready, our hybrid Delrin®/monoball control arm bearings are more at home on the street than other kits that are advertised as “race-only” bearings. We did extensive street, autocross, and track testing to ensure the spherical bearing used in this bushing design excelled in each setting.

The stock rubber bushings, even those found in the M3, allow significant fore/aft movement of the front wheels to help absorb road impacts, especially when being pushed hard.  This soft flexible design maximizes daily driving comfort, but also allows considerable alignment change.  This unwanted deflection stands between you and a crisp, confidence-inspiring driving experience.  The advantage of a monoball bearing is that it will not deflect under load, eliminating all unwanted deflection while still allowing complete freedom of movement in the desired angles. What you get is superior steering precision with better handling from more consistent alignment and direct braking feedback, with exceptional service life.  Thanks to the Delrin® insert and double lip seals, there's none of the extra noise or reduced service life often found on other spherical bearings.

In short, if you're seeking front control arm bushings that offer precise, predictable handling, crisper braking feel, with a long service life free from noise - look no further. We have you covered.


Features:

Bearing housing

  • Precision CNC machined from 6061-T6 blue anodized aluminum with a pre-installed grease fitting and grease distribution channels making this a serviceable design
  • Knurling allows for a wide variance in lollipop dimension, although this particular SKU comes pre-installed, so you won't need to worry about that. Want to install your own? Click here. 

Bearing

  • A high quality sealed bearing with Delrin® inserts. Delrin® was chosen due to durability under pressure, while still soft enough to create a perfect play-free fitment on the control arm.
  • Replaceable for infinite service life - no need to replace the entire mount in the event a bearing happens to fail.

Includes new hardware. Grease before installation and with each oil service with high quality Moly grease for maximum service life. Need a grease fitting tool?

Installation is relatively easy - see our instructions here.

This item fits the following BMWs that use a centered-style bushing: 

1984-1991 E30 BMW 318i, 318is, 325, 325e, 325es, 325i, 325is 
1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
1996-1999 E36 BMW M3 S52
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i MZ3 M Coupe M Roadster 

Qty
$174.97
$249.95 (Sale - Save 30%)
Ships in 6 days
Free Shipping Free Shipping
Add to Wish List
Turner Motorsport Greasable Front Control Arm Monoball Upgrade set (With Brackets) - E46 M3
Turner Motorsport
Part Number: 013276TMS

Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011).  We wanted to offer e30, e36, and e46 owners similar levels of handling precision and control for the track and street, but weren’t satisfied with the other options out there.  Instead of a Delrin bushing or unsealed spherical bearing alone, we selected an oversized sealed greaseable spherical monoball to offer unparalleled durability and precision, but designed a Delrin adapter sleeve to help isolate the added noise, vibration, and harshness that a full solid monoball bearing will have. While race-ready, our hybrid Delrin/monoball control arm bearings are more at home on the street than other kits that are advertised as “race-only” bearings. We did extensive street, autocross, and track testing to ensure the spherical bearing used in this bushing design excelled in each setting.

The stock rubber bushings, even those found in the M3, allow significant fore/aft movement of the front wheels to help absorb road impacts, especially when being pushed hard.  This soft flexible design maximizes daily driving comfort, but also allows considerable alignment change.  This unwanted deflection stands between you and a crisp, confidence-inspiring driving experience.  The advantage of a monoball bearing is that it will not deflect under load, eliminating all unwanted deflection while still allowing complete freedom of movement in the desired angles. What you get is superior steering precision with better handling from more consistent alignment and direct braking feedback, with exceptional service life.  Thanks to the Delrin insert and double lip seals, there's none of the extra noise or reduced service life often found on other spherical bearings.

In short, if you're seeking front control arm bushings that offer precise, predictable handling, crisper braking feel, with a long service life free from noise - look no further. We have you covered.

Features:

Bearing housing

  • Manufactured using 6061-T6 blue anodized aluminum with a pre-installed grease fitting and grease distribution channels making this a serviceable design
  • Knurling allows for a wide variance in lollipop dimension, although this particular SKU comes pre-installed, so you won't need to worry about that. Want to install your own? Click here. 

Bearing

  • A high quality greaseable double lip sealed bearing with Delrin® inserts. Delrin® was chosen due to durability under pressure, while still soft enough to create a perfect play-free fitment on the control arm.
  • Replaceable for infinite service life - no need to replace the entire mount in the event a bearing happens to fail.

Includes new hardware. Grease before installation and with each oil service with high quality Moly grease for maximum service life. Need a grease fitting tool?

Installation is relatively easy - see our instructions here. 

This item fits the following BMWs: 
2001-2006 E46 BMW M3 
 

Qty
$209.97
$299.95 (Sale - Save 30%)
In Stock
Free Shipping Free Shipping
Add to Wish List
Turner Shifter Arm Bracket with Polyurethane Bushing - E28, E30, E34
Turner Motorsport
Part Number: 021011TMS01A

Vague or slopping shifter feel even after installing a short shifter or new OE shifter linkage bushings?  Looking for a more precise shifter feel in your classic BMW?  Consider replacing your old, worn rubber rear shifter bushing with new Turner poly to get the best shifting experience possible!  The Turner engineering team wasn’t satisfied with the other options on the market, so we set out to design the best solution for ease of installation and performance.

The competition requires the installer to cut or burn the rubber bushing out of the stock housing to be able to install their poly bushing, requiring reuse of an old worn out housing, or buying a new costly bushing assembly.  We decided this was cumbersome and unnecessary, so we designed a complete upgrade replacement bracket with a 70A polyurethane bushing preinstalled for a quick bolt-in installation.  Our bracket is precision formed with a CNC machined and TIG welded bushing cup to perfectly match the OEM bracket, and is made from 304 stainless steel for exceptional corrosion resistance.  The result is a complete design solution that creates much crisper shifting with nearly zero added NVH for a more engaging and enjoyable driving experience.

Note: Some shifter arms have a mushroom-shaped end. Use extra care installing our bushing on these arms. Filing this mushroom down makes installation easier, however simply applying sufficient pressure to the back side of the bushing during installation will allow this bushing to install smoothly.

This is the last bushing you will ever want or need for your E28, E30, or E34!

Product Features:

  • Pre-installed bushing, NO cutting or burning for installation
  • Corrosion resistant 304 stainless steel mounting bracket
  • 70A durometer poly bushing for reduced NVH
  • Ready to install out of the box
  • Replaces Genuine BMW part number 25111220707
  • Made in America

Have a newer BMW? Turner Shifter Bushings for most other models will be available July 2017.

This fits the following BMWs:        

1987-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1987-1988 E28 BMW 528e 533i 535is M5
1987-1989 E24 BMW M6
1993-1995 E34 BMW 525i 530i 535i
1991-1993 E34 BMW M5

Turner Performance Polyurethane Engine Mount Set - N52 N54 N55
Turner Motorsport
Part Number: 002445TMS

Rubber engine and transmission mounts for a street car and solid aluminum for the track, right? Well, it's not that straightforward anymore.

Stock rubber fluid-filled mounts are designed to be soft and comfortable, limiting the NVH (noise, vibration, and harshness) felt by the driver. The drawback inherent with a conventional design is driveline deflection, making it more difficult to put the power to the wheels, as well as making a money-shift or miss-shift more likely as they age. Solid mounts are exactly the opposite of this - they permit tons of NVH while offering zero deflection, making these a must have for track-driven vehicles looking to capitalize on every ounce of performance available. Enthusiasts looking to find the best of both worlds often look to polyurethane engine mounts - and many are disappointed with other designs on the market. Seeking a mount that offers a positive connection yet doesn't deform, fail, or rattle the fillings out of their mouths is frequently a lost cause.

Until now. 

We engineered these mounts with these very concerns in mind. We know if a soft mount offers a sloppy connection it doesn't work on the track, and a solid mount isn't acceptable as a daily driver (for most!) and set out to engineer a mount that would meet the needs for both. At the core of our enclosed design is a partially-constrained, multi-piece polyurethane bushing with precisely-set preload. This architecture absorbs and disperses resonant engine frequencies as opposed to amplifying them (like some other designs do), which results in a positive-connection, enthusiast-feel mount with the vibration. Understanding that heat is a concern for the passenger side mount's close proximity to the exhaust, we utilize a PEEK thermal insulation plate to greatly reduce heat transfer to the polyurethane, making heat a non-issue for these mounts. 

We offer two durometers, with both densities offering similar "positive connection" feeling. 60A is slightly softer and offers more of a stock feel, while 80A delivers a little more engine "feel" while under acceleration. 

Product features and benefits:

  • Crisper throttle response, positive shifter location, direct power transfer
  • High quality polyurethane offered in both 60A & 80A durometers (rebuildable, too)
  • Resistant to water, ozone, and chemicals, maintaining its resiliency and elasticity longer than conventional rubber.
  • Precision machined billet 6061-T6 aluminum housing, black anodized for durability and corrosion resistance. Grade 10.9 stud - fear not, big turbo owners.
  • Thermal isolation spacer on the hot side to resist heat transfer into the poly
  • Engineered in-house and made in America

*Still require a solid mount? Turner Motorsport solid engine and transmission mounts for N52/N54/N55 coming August 2017.

This item fits the following BMWs:
2008-2013 E82 E88 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 325xi 328i 328xi 330i 330xi 335d 335i 335xi - Sedan
2007-2011 E91 BMW 325i 325xi 328i 328xi - Touring Wagon
2007-2013 E92 BMW 328i 328xi 335i 335is 335xi - Coupe
2007-2013 E93 BMW 328i 335i 335is - Convertible
2009-2016 E89 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Front Cross-Drilled & Slotted 2-Piece Turner TrackSport Wave Rotors - F10 M5, F13 M6, F06 M6 (Pair)
Turner Motorsport
Part Number: 010023TMS01A

The all-new Turner TrackSport Full-Floating rotor is a great bolt-on compliment to the performance and appearance of the BMW M5 and M6. By developing these full-floating rotors with a scalloped design, we are able to move the weight towards the hub and away from the perimeter of the rotor. This reduces rotational inertia, improving acceleration and braking performance compared to the OE rotor design.

Features and benefits:

  • High-quality FC-30 cast iron with high a carbon content offers improved wear properties at elevated temperatures and has excellent thermal conductivity and vibration damping properties.
  • Lightweight, precision machined 6061-T6 aluminum hat hard anodized with an attractive matte black finish that is both durable and corrosion resistant.
  • Friction surfaces are precision ground to ensure perfectly parallel surfaces and improve pad bed in, and rotors are precision balanced for vibration free operation.
  • Full float design allows independent radial and lateral thermal expansion and movement; this radial expansion allows the ring to increase in diameter without being restrained by the hat, reducing the tendency to “cone” or distort toward the outer braking surface, improving pedal feel and pad wear characteristics
    • This full float design also conducts less heat into the bearings due to reduced contact area between the rotor and the hat, resulting in longer lasting wheel bearings
    • Lateral float capability allows the rotor to self-center between the pads, improving pad wear and reducing drag.  It also reduces the effects of pad knockback, (the tendency of the rotor to push the pistons back into the calipers due to wheel bearing deflection under extreme loading) which improves pedal feel and provides more consistent braking.
  • Rotor rings are heat treated to reduce the tendency for cracking by reducing internal rotor stresses; painted internal surfaces reduces or eliminates rusting for a rotor that continues to look newer, longer
  • TrackSport 2-Piece rotors feature side-specific directionally curved veins which pump air through the rotor at a higher velocity, leading to consistent, rapid cooling on both sides equally.

Turner TrackSport 2-Piece rotors have been subjected to thousands of miles of hard street and track use as well as scientific stress testing on the brake dyno, performing countless high speed stops in quick succession followed by careful post-test inspection for signs of irregular wear, warping, stress cracking, or any other signs of failure.  They have proven to be durable, demonstrating excellent wear characteristics, no warping, and minimal thermal stress cracking.

What this means in real-world uses is a long-lasting rotor with performance equal to, and in some areas superior to, factory rotors. A bolt-on replacement (for cars without carbon ceramic rotors only), these rotors utilize original equipment pads, calipers, and hardware. 

These front brake discs / brake rotors fit: 
2011+ F10 BMW M5 
2013+ F06 BMW M6 Gran Coupe 
2012+ F12 BMW M6 
Not for cars with Carbon Ceramic rotors.

 

Turner Plug-and-Play IAT Relocation Kit
Turner Motorsport
Part Number: 014579TMS

All vehicles will lose some degree of performance due to heat soak under the right operating conditions.  Engine management systems constantly monitor operating conditions and modifying parameters based on sensor inputs. BMW integrated the intake air temp sensor in the MAF housing on models such as the E39 M5, and, being sandwiched behind a hot radiator and in some applications next to an even hotter valve cover, this is less than ideal for performance applications. Absorbing excess heat from its surroundings, the MAF can’t shed it fast enough, and the ECU reads an inaccurately high intake air temperature. Compensating for this false hot air measurement, the ECU pulls timing and runs a richer fuel mixture, resulting in a significant loss of torque.

What can you do?  Locate an intake air temp sensor in a location where it can properly measure incoming air temps and where it's less prone to heat soak. Mounting the sensor further away from the heat source and isolating it from the MAF housing, it can both resist the effects of heat soak longer and respond to temperature changes more quickly.  The result is you’ll experience reduced torque loss and more consistent power output when you’re pushing your engine hard. 

The Turner engineering team was initially skeptical of the claimed performance benefits of this modification. They first set out validate the functionality and performance benefit of a temp sensor relocation. Replicating stop-and-go traffic heat soak in a 2001 540i was a simple task in a controlled environment - their dynometer. First the car was heat soaked to simulate being stuck in traffic or moving at low speeds by running the car four times on the dyno with the dyno's cooling fans disabled. The fans were then turned on for three more runs to observe the recovery rate once air flow was reintroduced. The test: following this procedure once with a stock IAT, and once with their relocation kit in place. 

The result? Turner recovered 11lb-ft torque at 2500rpm through use of their relocation kit, with even greater recovery to be found for M5 owners. Here are the heat soak-related torque losses Turner experienced:

Stock IAT location:
18rwtq at 2500rpm
10rwtq at 3000rpm
9rwtq at 3700rpm

Turner IAT Relocation:
7rwtq at 2500rpm
5rwtq at 3000rpm
5rwtq at 3700rpm

**Click here for installation instructions**

The Turner engineering team designed a complete plug and play kit (unlike all other options on the market) that makes for quick, easy, and reversible installation. Weather-sealed connectors keep out the elements, while sheathed wiring offers a clean appearance underhood. With a harness nearly 3 feet long - the Turner IAT relocation kit offers flexibility in positioning, but not too long that you're left with unsightly excess wiring. Turner recommends positioning the sensor in a location away from engine heat, but still within the intake ducting to achieve accurate intake temp readings - such as the far side of the base of the airbox. Vehicles with cold air intakes with cone-style filters can even position the sensor in the end of the filter. Simply drill a hole in your (cool) location of choice and plug in the harness. More information including installation instructions and some good examples of sensor mounting locations can be found in our DIY PDF. 

We include everything you need to relocate your IAT, just select your desired sensor brand below - Genuine BMW or original equipment Beru.

Also the perfect plug-n-play option for anyone looking to upgrade their intake to utilize an Alpha-N tune!

Note for vehicles with M62 engine: applicable to 1999 and up

Qty
Starting At $99.95
In Stock
Free Shipping Eligible Free Shipping
on orders $199 and up
Add to Wish List
Front Adjustable Camber Plates - E46 - Turner Motorsport Track: Max Lowered
Turner Motorsport
Part Number: TSU4680MSTA

These plates adjust camber with a fixed caster setting and have a lot of important motorsport-developed features that other camber kits do not. Race inspired from our Championship-winning E90 race cars in the Grand-Am/IMSA GS class. The location and angles for the main bearing were carefully engineered to allow the proper motion ratio and strut angles during adjustment. This greatly reduces bending forces on the strut itself which improves performance and longevity. By designing for one chassis we're able to focus on what works best in that application - proper fitment and operation without unnecessary adapters, easy-to-use camber and caster adjustments, and an intelligent modular design.
 

Since this design is specific to the E46, we can build it with the bare minimum of adapters and extra hardware. This not only cuts down on confusion but makes it easier to assemble and operate. We use the correct-sized bearing for the 16mm strut shaft; no sleeves or bearing adapters required. Only a small stainless steel spacer and the upper spring hats from your coil over kit are all that's required to install. We also produce the upper spring plates if you need them (see Additional Items below). We have used our camber plates with most of the major strut manufacturers on the market - AST, Koni Motorsport, Moton, Ohlins, MCS, Bilstein, and KW.

If you need upper spring hats for the top of the springs, see the Additional Items list below. We make upper spring hats for 60mm, 2.25" and 2.50" springs and in 14mm and 16mm strut pin sizes. If you don't see the spring hat that you need, click here for the full listing. Or call us directly.

Features:

  • Preserves the correct E46 geometry
  • Compatible with 60mm, 2.5", 2.25" springs
  • Maximum shock travel
  • Lightweight
  • Durable materials
  • Large surface area
  • Easy to use for fast camber changes

This item fits the following BMWs (w/ Race Coil Overs):
1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci 

Max Lowered - Adjustable Camber Plates - E82, E9X - Turner Motorsport Track
Turner Motorsport
Part Number: TSU9080RC9

These are the Turner Camber Plates used on our Championship-winning E90 race cars (also fits E82 1-series). These plates adjust camber with a fixed caster setting and have a lot of important motorsport-developed features that other camber kits do not. These were a clean-sheet design when we raced the E90 328i in the Grand-Am/IMSA GS class.

By placing a specific focus on minimizing stack height while retaining strength, our "Max Lowered" camber plates offer maximum shock travel to allow dampers to perform properly at a wide range of ride heights. 

Design Highlights -

  • preserves the correct E90 geometry
  • compatible with 60mm, 2.5", 2.25" springs
  • maximum shock travel
  • light weight
  • durable materials
  • large surface area
  • easy to use for fast camber changes

The Turner E90 Race Camber Plates are the most advanced design on the market. These are designed specifically for the E90 chassis - no shortcuts or cookie-cutter components. We started with a fresh design to make these very user friendly and easy to install and set up. The E90 front suspension has unique geometry and the strut is mounted at an angle that can put significant side loading on the strut shaft if it's not located properly. The location and angles for the main bearing were carefully engineered to allow the proper motion ratio and strut angles during adjustment. This greatly reduces bending forces on the strut itself which improves performance and longevity. By designing for one chassis we're able to focus on what works best in that application - proper fitment and operation without unnecessary adapters, easy-to-use camber and caster adjustments, and an intelligent modular design.

Another important feature of the Turner Camber Plates is the size of the upper plate. Our plates have a very large surface area to better spread strut forces through the strut tower. A smaller upper plate, like those found on competitor's kits, will localize strut forces and contribute to strut tower deformation ('strut tower mushrooming'). This is a very important feature especially as these cars get older and spend more time on the track. Deformed strut towers are a serious performance and safety concern and our camber plates are properly designed to handle the loads. The factory strut reinforcement plates are not required with our camber plates (but you can use them if you want to).

Since this design is specific to the E90, we can build it with the bare minimum of adapters and extra hardware. This not only cuts down on confusion but makes it easier to assemble and operate. We use the correct-sized bearing for the 16mm strut shaft; no sleeves or bearing adapters required. Only a small stainless steel spacer and the upper spring hats from your coil over kit are all that's required to install. We also produce the upper spring plates if you need them (see Additional Items below). We have used our camber plates with most of the major strut manufacturers on the market - AST, Koni Motorsport, Moton, Ohlins, MCS, Bilstein, and KW.

If you need upper spring hats for the top of the springs, see the Additional Items list below. We make upper spring hats for 60mm, 2.25" and 2.50" springs and in 14mm and 16mm strut pin sizes. If you don't see the spring hat that you need, click here for the full listing. Or call us directly.

This item fits the following BMWs (w/ Race Coil Overs):
2008-2012 E82 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 328i 330i 335i M3 - Sedan
2006-2012 E91 BMW 328i Wagon
2007-2012 E92 BMW 328i 335i 335is M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible

 

Adjustable Camber/caster Plates - E82, E9X - Turner Motorsport Race
Turner Motorsport
Part Number: TSU9080T9XA

Similar to our Turner Camber Plates used on our Championship-winning E90 race cars (also fits E82 1-series), these plates adjust camber and caster featuring a lot of important motorsport-developed features that other camber kits do not. 

The Turner E90 Race Camber Plates are the most advanced design on the market. These are designed specifically for the E9x/E8x chassis - no shortcuts or cookie-cutter components. We started with a fresh design to make these very user friendly and easy to install and set up. The E90 front suspension has unique geometry and the strut is mounted at an angle that can put significant side loading on the strut shaft if it's not located properly. The location and angles for the main bearing were carefully engineered to allow the proper motion ratio and strut angles during adjustment. This greatly reduces bending forces on the strut itself which improves performance and longevity. By designing for one chassis we're able to focus on what works best in that application - proper fitment and operation without unnecessary adapters, easy-to-use camber and caster adjustments, and an intelligent modular design.


Another important feature of the Turner Camber Plates is the size of the upper plate. Our plates have a very large surface area to better spread strut forces through the strut tower. A smaller upper plate, like those found on competitor's kits, will localize strut forces and contribute to strut tower deformation ('strut tower mushrooming'). This is a very important feature especially as these cars get older and spend more time on the track. Deformed strut towers are a serious performance and safety concern and our camber plates are properly designed to handle the loads. The factory strut reinforcement plates are not required with our camber plates (but you can use them if you want to).

Since this design is specific to the E9x/E8x, we can build it with the bare minimum of adapters and extra hardware. This not only cuts down on confusion but makes it easier to assemble and operate. We use the correct-sized bearing for the 16mm strut shaft; no sleeves or bearing adapters required. Only a small stainless steel spacer and the upper spring hats from your coil over kit are all that's required to install. We also produce the upper spring plates if you need them (see Additional Items below). We have used our camber plates with most of the major strut manufacturers on the market - AST, Koni Motorsport, Moton, Ohlins, MCS, Bilstein, and KW.

Features:

  • compatible with 60mm, 2.5", 2.25" springs
  • maximum shock travel
  • light weight
  • durable materials
  • large surface area
  • easy to use for fast camber & caster changes
  • Spherical bearings

If you need upper spring hats for the top of the springs, see the Additional Items list below. We make upper spring hats for 60mm, 2.25" and 2.50" springs and in 14mm and 16mm strut pin sizes. If you don't see the spring hat that you need, click here for the full listing. Or call us directly.


This item fits the following BMWs (w/ Race Coil Overs):
2008-2012 E82 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 328i 330i 335i M3 - Sedan
2006-2012 E91 BMW 328i Wagon
2007-2012 E92 BMW 328i 335i 335is M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible

Turner Motorsport SMG Shift Paddles
Turner Motorsport
Part Number: 013223TMS

When we were designing these SMG shift paddles we kept the different types of BMW drivers in mind to offer a top quality product to everyone with SMG II and an M steering wheel. The final product ended up being the perfect blend of styling, smooth curves, and comfort in your fingers to appeal to both the daily enthusiast and race track driver.

Cut from 6061-T6 aluminum and anodized for corrosion resistance and interior preference and an optional pad for the back of the paddle for increased grip and comfort. The pad adheres to the back of the paddles and is designed from neoprene to resist any temperature discomfort on hot and cold days as well as resisting slippage from wet hands. Our in-house engineers gave special attention to the key details of the M3 cockpit to ensure the paddles have a seamless OEM+ fit and finish. Subtle design details allow the paddle to conform perfectly into gauge cluster, steering wheel, and other surrounding components while offering superior comfort at the driver’s finger tips due to the extensively detailed 3D machined pockets. 


Features:

  • Anodized 6061-T6 aluminum
  • Optional stick-on neoprene padding
  • Engineered in-house and made in the USA
Qty
Starting At $179.95
In Stock
Free Shipping Eligible Free Shipping
on orders $199 and up
Add to Wish List
Turner Motorsport DCT Shift Paddles
Turner Motorsport
Part Number: 013224TMS

The DCT transmission is a truly amazing part of M performance, finally making it a tough choice between buying and automatic or a manual. Turner found room for some improvement to enhance the performance felt at your fingertips. The engineers at Turner designed these paddles to be more comfortable, better looking, and easier to grip, making this a perfect product for any type of driver. Being smooth is a feature we took pride on to offer a more natural appearance and for the ultimate comfort while shifting. Neoprene pads were also designed to reduce temperature shock from the car sitting in extreme temperatures as well as being able to maintain grip even if your hands are getting a bit sweaty.

Offered in three colors to match you and your car:

  • Brushed Aluminum
  • Black Anodized
  • Natural
  • Includes new mounting hardware
  • Neoprene shift pads (optional)

 

Fits the following BMW models:

2008-2013 E90 M3 Sedan with DCT transmission
2008-2013 E92 M3 Coupe with DCT transmission
2008-2013 E93 M3 Convertible with DCT transmission
2010-2013 E70 X5M 
2010-2013 E71 X6M 

Qty
Starting At $169.90
In Stock
Free Shipping Eligible Free Shipping
on orders $199 and up
Add to Wish List
Turner Motorsport Power Pulley Kit - E53 X5 3.0 (M54)
Turner Motorsport
Part Number: PPK-X5M54

Underdrive Power Pulleys work to 'free up' horsepower. Any accessory that spins from the main drive belt is using up power. That's power that could otherwise be used to move the car. By giving some of that power back to the engine, you can make the car faster! It's like FREE HORSEPOWER!

Underdrive pulleys for your BMW will slow down engine-mounted accessories - the water pump, power steering pump, and alternator*. These systems contribute to 'parasitic losses' - power lost from what the engine could produce if it did not have these systems. Since less energy is used to move them, that power is transferred back to the engine and used to propel the car. Our pulleys give a 10-20% reduction in rotation, releasing up to 11hp on most BMW six-cylinder engines. There's also a small but noticeable improvement in throttle response too! We have done extensive testing and development work, both on and off the track, to ensure that the accessory systems function as they should. On our Racing pulley kits we actually underdrive certain components more so we feel our Street pulleys are an ideal compromise between power/torque gains, reliability, and system performance. Our pulley kits have been on the market for over ten years, and used in all of our own cars, with zero component failures related to their use.

Our pulleys are made from T-6061 aluminum and finished in a durable black hard anodize that is very resistant to wear, chemical exposure, and heat. We designed our pulleys to look similar to the factory parts but also to be stronger and, in most cases, slightly lighter too. For example, a Turner alternator pulley is less than half the weight of the stock steel pulley! With our hardcoat aluminum you will never have to worry about a serious failure of a stock plastic pulley. A 'stealth' approach to aesthetics was our goal and we let the results speak for the pulley design. Installation is straight forward and easy with simple hand tools. Removal of the fan is required for access to the front of the engine. Total install time for a 3-piece pulley set should be around 1.5 hours. A new longer belt is included and we also recommend replacing the separate A/C belt, belt tensioners, and the guide and deflection pulleys at the same time.

* Alternator Pulley Options

Bosch or Valeo? BMW built your car with either a Bosch or Valeo brand alternator. Unfortunately, the pulley is not the same for both brands. The brand is usually printed on the black plastic cover of the alternator but may be facing the frame rail or the ground. If you know which brand you have, select your option below and we'll send you the correct alternator pulley for your BMW. Don't know which you have? NO PROBLEM! We can send you both. The 2nd pulley costs $40 but you will receive a refund once we get the un-used pulley back (return shipping not included).

Stereo Systems. We offer our kits in two different ways: a full power kit with all 3 pulleys or a 2 pulley kit for people who do not wish to underdrive their alternator (for large stereo systems or other battery-draining modifications). Our kits have been tested to be compatible with the factory premium stereo systems (Harmon Kardon, etc). But any major alterations or upgrades from the factory system may work best with our 2 pulley kit and no underdrive of the alternator. Otherwise, the 3 pulley kit is recommended because it not only underdrives the alternator but the Turner pulley is much lighter than the stock one.


Additional Info

Clickhere for example dyno graph

To learn more about Turner Power Pulleys, click here.

 

 


This Power Pulley Kit Fits the Following BMWs:
2000-2006 E53 BMW X5 3.0i

 

 

Qty
Starting At $242.95
Ships on Jan 2, 2018
Free Shipping Free Shipping
Add to Wish List
Turner Motorsport Racing Power Steering Pulley - E46 M3
Turner Motorsport
Part Number: TEN4623R03

Don't let power steering failure ruin your weekend and cost you a win! In the Grand Am Cup series, TMS has found that the power steering pump on the M3 S54 is prone to wear  potentially costing you a win or even a finish. The TMS Racing Power Steering Pulley is designed to achieve three goals: gain horsepower, reduce power steering pump wear, and lower power steering fluid temperatures. The pulley has been track tested on our Grand Am Cup M3's and dyno-tested. This pulley is strictly for race/track cars only. We suggest installing with the TMSRacing E46 M3 Alternator pulley P/N: TEN 46 22 RM3

Parts list for kit

 

  • Racing Power Steering Pulley
  • When would it be a good time to perform this work on my car?
  • When replacing a drive belt.
  • When installing a new power steering pump
  • Before a race weekend to help you get to the podium.
  • What main drive belt do I need to use with the TMS Racing Power Steering Pulley?
  • If you have the standard pulley kit you will need a 6 groove, 1555mm long belt (T#1494)
  • If you have the full, TMS Racing pulley kit you will need a 6 groove, 1538mm long belt (T#6728)

     

 

Qty
$188.95
In Stock
Free Shipping Eligible Free Shipping
on orders $199 and up
Add to Wish List
Turner Motorsport Power Pulley Kit - E39 525i/530i 01-02
Part Number: PPK-E39-M54

Underdrive Power Pulleys work to 'free up' horsepower. Any accessory that spins from the main drive belt is using up power. That's power that could otherwise be used to move the car. By giving some of that power back to the engine, you can make the car faster! It's like FREE HORSEPOWER!

Underdrive pulleys for your BMW will slow down engine-mounted accessories - the water pump, power steering pump, and alternator*. These systems contribute to 'parasitic losses' - power lost from what the engine could produce if it did not have these systems. Since less energy is used to move them, that power is transferred back to the engine and used to propel the car. Our pulleys give a 10-20% reduction in rotation, releasing up to 11hp on most BMW six-cylinder engines. There's also a small but noticeable improvement in throttle response too! We have done extensive testing and development work, both on and off the track, to ensure that the accessory systems function as they should. On our Racing pulley kits we actually underdrive certain components more so we feel our Street pulleys are an ideal compromise between power/torque gains, reliability, and system performance. Our pulley kits have been on the market for over ten years, and used in all of our own cars, with zero component failures related to their use.

Our pulleys are made from T-6061 aluminum and finished in a durable black hard anodize that is very resistant to wear, chemical exposure, and heat. We designed our pulleys to look similar to the factory parts but also to be stronger and, in most cases, slightly lighter too. For example, a Turner alternator pulley is less than half the weight of the stock steel pulley! With our hardcoat aluminum you will never have to worry about a serious failure of a stock plastic pulley. A 'stealth' approach to aesthetics was our goal and we let the results speak for the pulley design. Installation is straight forward and easy with simple hand tools. Removal of the fan is required for access to the front of the engine. Total install time for a 3-piece pulley set should be around 1.5 hours. A new longer belt is included and we also recommend replacing the separate A/C belt, belt tensioners, and the guide and deflection pulleys at the same time.

* Alternator Pulley Options

Bosch or Valeo? BMW built your car with either a Bosch or Valeo brand alternator. Unfortunately, the pulley is not the same for both brands. The brand is usually printed on the black plastic cover of the alternator but may be facing the frame rail or the ground. If you know which brand you have, select your option below and we'll send you the correct alternator pulley for your BMW. Don't know which you have? NO PROBLEM! We can send you both. The 2nd pulley costs $40 but you will receive a refund once we get the un-used pulley back (return shipping not included).

Stereo Systems. We offer our kits in two different ways: the full Power Pulley Kit with all 3 pulleys or as a 2 pulley kit if you do not wish to underdrive your alternator (for large stereo systems or other critical-charging modifications). Our kits have been tested for compatability with the factory premium stereo systems (Harmon Kardon, etc). But any major upgrades from the factory premium systems will work best with our 2 pulley kit and no underdriving of the alternator. For all stock stereo systems the full 3-piece set is recommended because the Turner alternator pulley will help make more power and is also much lighter than the stock pulley.

Additional Info

Clickhere for example dyno graph

Click here for installation instructions.

Turner Pulley Kit contents:

 

  • Turner water pump pulley
  • Turner power steering pump pulley
  • Turner alternator pulley
  • new extended length belt
  • instructions


     
  • This underdrive pulley kit fits the following BMW:
    2001-2002 E39 BMW 525i 530i

 

Qty
Starting At $242.95
Ships on Jan 2, 2018
Free Shipping Free Shipping
Add to Wish List
Turner Motorsport Race Alternator Pulley For E46 M3 Valeo Alternator
Turner Motorsport
Part Number: TEN4622RM3

Part of the process of building a proper race car is to delete and simplify portions of the wiring harness. This not only saves weight and reduces complexity, but it also allows you to run a smaller, lighter racing battery. So why is your alternator still charging at the original rate?!? This S54 racing alternator pulley underdrives the alternator more than our standard Power Pulley, freeing up horsepower and reducing alternator wear. This pulley is over 70% larger than the original stock pulley. With less electrical load, you don't need the original alternator output anymore. You can drive the alternator less and return that "lost" horsepower back to the engine. This part was developed and race-proven on our E46 Touring Cars.

Because this pulley is so much larger than the original (70%), special care will need to be taken so that it does not interfere wtih other components on the engine - power steering lines, oil cooler lines, coolant hoses, etc. This pulley is strictly for race/track cars only, due to the size of the alternator pulley the proper voltage cannot be maintained at low RPM. This pulley must be used with our Turner Power Pulley or Turner Racing Pulley kits.

For the stock M3 Valeo alternator only.

Pulley belt information:

Qty
Starting At $139.95
In Stock
Free Shipping Eligible Free Shipping
on orders $199 and up
Add to Wish List
Turner Motorsport Race Alternator Pulley For E46/Z3 M54 Bosch Alternator
Turner Motorsport
Part Number: TEN9922330

Part of the process of building a proper race car is to delete and simplify portions of the wiring harness. This not only saves weight and reduces complexity, but it also allows you to run a smaller, lighter racing battery. So why is your alternator still charging at the original rate?!? This M50/M52/S52 racing alternator pulley underdrives the alternator more than our standard Power Pulley, freeing up horsepower and reducing alternator wear. This pulley is over 80% larger than the original stock pulley. With less electrical load, you don't need the original alternator output anymore. You can drive the alternator less and return that "lost" horsepower back to the engine. This part is an upgrade to the alternator pulley already included in our Power Pulley kit and was developed and race-proven on our E46 Touring Cars.

Because this pulley is so much larger than the original (80%), special care will need to be taken so that it does not interfere wtih other components on the engine - power steering lines, oil cooler lines, coolant hoses, etc. The upper idler pulley is no longer needed with the racing pulley and will be removed. A new belt is required (add one from the options below).

For Bosch alternators only.

The remainder of the Turner Power Pulley Kit is required (water pump and power steering pump pulleys).

Qty
Starting At $109.95
In Stock
Free Shipping Eligible Free Shipping
on orders $199 and up
Add to Wish List
Turner Motorsport Race Alternator Pulley For E36/Z3 M50/M52/S52 Bosch Alternator
Turner Motorsport
Part Number: TEN9922778

Part of the process of building a proper race car is to delete and simplify portions of the wiring harness. This not only saves weight and reduces complexity, but it also allows you to run a smaller, lighter racing battery. So why is your alternator still charging at the original rate?!? This M50/M52/S52 racing alternator pulley underdrives the alternator more than our standard Power Pulley, freeing up horsepower and reducing alternator wear. This pulley is over 80% larger than the original stock pulley. With less electrical load, you don't need the original alternator output anymore. You can drive the alternator less and return that "lost" horsepower back to the engine. This part is an upgrade to the alternator pulley already included in our Power Pulley kit and was developed and race-proven on our E36 and E46 Touring Cars.

Because this pulley is so much larger than the original (80%), special care will need to be taken so that it does not interfere wtih other components on the engine - power steering lines, oil cooler lines, coolant hoses, etc. The upper idler pulley is no longer needed with the racing pulley and will be removed. A new belt is required (add one from the options below).

For Bosch alternators only.

The remainder of the Turner Power Pulley Kit is required (water pump and power steering pump pulleys).

Qty
Starting At $139.95
In Stock
Free Shipping Eligible Free Shipping
on orders $199 and up
Add to Wish List
Turner Motorsport Power Pulley Kit - E60 M5 and E63/E64 M6 S85 V10
Turner Motorsport
Part Number: ppk-s85KT

Get MORE HORSEPOWER and TORQUE on your 2006 and newer M5 sedan or M6 coupe/convertible by replacing the stock crank pulley with this specially designed performance version. The Power Pulley reduces rotational mass and safely under drives your belt driven auxiliaries for reduced parasitic power loss. The end result: More power to your M5 or M6's rear wheels! Designed to give the best performance benefit with no sacrifices or compromises to your BMW's reliability. These have been tested on hundreds of cars before public release and there are simply NO DOWNSIDES to this upgrade.

Limited time introductory offer: FREE GROUND shipping on all orders shipped within the 48 contiguous states shipping on this V10 pulley kit.


CNC machined using aircraft grade 6061 aluminum billet, and anodized with a stealthy black coating. Others may advertise "their" crank pulley boasting higher numbers (using a smaller pulley profile), but we have concluded that for street and track driven M5 and M6, this is the best size and design to ensure proper engine temp and auxiliary functionality. As the S85 V10 engine doesn't use a traditional harmonic balancer, all factory harmonics and dampening are fully and properly retained. We've found this pulley alone adds 18 to 22 HP and 17 to 21 Ft/lbs Torque on a stock M5 or M6 with no other mods(!!).

The E60 M5 / E63 M6 Power Pulley Kit includes:
(1) Underdrive Crank Pulley
(1) Correctly Sized Drive Belt
(6) Allen Head Bolts
(1) Installation instructions

This underdrive pulley fits the following BMWs:
2006-2010 E60 M5 sedan
2006-2010 E63/E64 M6 coupe & convertible
 

Turner Motorsport Power Pulley Kit - E46 323i/328i
Turner Motorsport
Part Number: PPK-E46

Underdrive Power Pulleys work to 'free up' horsepower. Any accessory that spins from the main drive belt is using up power. That's power that could otherwise be used to move the car. By giving some of that power back to the engine, you can make the car faster! It's like FREE HORSEPOWER !

Underdrive pulleys for your BMW will slow down engine-mounted accessories - the water pump, power steering pump, and alternator*. These systems contribute to 'parasitic losses' - power lost from what the engine could produce if it did not have these systems. Since less energy is used to move them, that power is transferred back to the engine and used to propel the car. Our pulleys give a 10-20% reduction in rotation, releasing up to 11hp on most BMW six-cylinder engines. There's also a small but noticeable improvement in throttle response too! We have done extensive testing and development work, both on and off the track, to ensure that the accessory systems function as they should. On our Racing pulley kits we actually underdrive certain components more so we feel our Street pulleys are an ideal compromise between power/torque gains, reliability, and system performance. Our pulley kits have been on the market for over ten years, and used in all of our own cars, with zero component failures related to their use.

Our pulleys are made from T-6061 aluminum and finished in a durable black hard anodize that is very resistant to wear, chemical exposure, and heat. We designed our pulleys to look similar to the factory parts but also to be stronger and, in most cases, slightly lighter too. For example, a Turner alternator pulley is less than half the weight of the stock steel pulley! With our hardcoat aluminum you will never have to worry about a serious failure of a stock plastic pulley. A 'stealth' approach to aesthetics was our goal and we let the results speak for the pulley design. Installation is straight forward and easy with simple hand tools. Removal of the fan is required for access to the front of the engine. Total install time for a 3-piece pulley set should be around 1.5 hours. A new longer belt is included and we also recommend replacing the separate A/C belt, belt tensioners, and the guide and deflection pulleys at the same time.

* Alternator Pulley Options
Bosch or Valeo?  BMW built your car with either a Bosch or Valeo brand alternator. Unfortunately, the pulley is not the same for both brands. The brand is usually printed on the black plastic cover of the alternator but may be facing the frame rail or the ground. If you know which brand you have, select your option below and we'll send you the correct alternator pulley for your BMW. Don't know which you have? NO PROBLEM! We can send you both. The 2nd pulley costs $40 but you will receive a refund once we get the un-used pulley back (return shipping not included).

Stereo Systems. We offer our kits in two different ways: the full Power Pulley Kit with all 3 pulleys or a 2 pulley kit if you do not wish to underdrive your alternator (for large stereo systems or other battery-draining modifications). Our kits have been tested for compatability with the factory premium stereo systems (Harmon Kardon, etc). But any major alterations or upgrades from the factory system will work best with our 2 pulley kit and no underdriving of the alternator. For all stock stereo systems the 3 pulley set is recommended because the Turner alternator pulley will help make more power and is also much lighter than the stock pulley.

Additional Info
Clickhere for example dyno graph

Click here for installation instructions.


This underdrive pulley kit fits the following BMW:
1999-2000 E46 BMW 323i 323ci 328i 328ci
Qty
Starting At $242.95
Ships on Jan 2, 2018
Free Shipping Free Shipping
Add to Wish List
Turner Motorsport Racing Pulley Set - E46 M3
Turner Motorsport
Part Number: PPK-S54-R

TMS E46 M3 Racing Pulley is designed to achieve three goals: gain horsepower, reduce alternator and power steering pump wear, and lower power steering fluid temperatures. Due to constant high revolutions of the S54 power steering pump when on the track, we designed our racing power steering pulley to slow down the pump. This lowers fluid temperatures, resulting in less wear to the pump. This kit also includes a large alternator pulley, which also reduces wear. Kit uses our street water pump “under drive” pulley. All of these working together produce a significant gain of over 15 horsepower. The pulley has been track tested on our Grand Am Cup M3’s and dyno-tested. This is strictly for race/track cars only, due to the size of the alternator pulley the proper voltage cannot be maintained at low RPM.

Note: We sell pulleys separately incase you have special needs. Simply give us a call, or drop us an email.

Click here for Racing Alternator Pulley - TEN4622RM3
Click here for Racing Power Steering Pulley – TEN4623R03
Qty
$458.85
In Stock
Free Shipping Free Shipping
Add to Wish List
E46 M3 Power Package - Shark Injector, Power Pulleys, & IAT Relocation Kit
Packaged by Turner
Part Number: E46S54SIPULLEY

Shark Injector Performance Software
The enthusiast's choice for over a decade, the Shark Injector's performance is only equaled by its own ease of install! Tune your ECU at the press of a button simply by plugging into the under-dash OBDII diagnostic port, there is no removal of your car's computer; no laptop or cables required. What does the Shark offer?

  • Unlock torque and horsepower
  • Smoother engine with less hesitation
  • Improved throttle response
  • Rev limit increased to 8100 or 8600
  • Top speed limiter removed
  • Installs in minutes!
  • Advanced features optional - DSC button controls Sport mode (only one button to push) or Sport mode memory (car remembers you Sport mode preference even after shutting the car off).

Turner Motorsport Power Pulleys 
Underdrive Power Pulleys work to 'free up' horsepower. Any accessory that spins from the main drive belt is using up power. That's power that could otherwise be used to move the car. By giving some of that power back to the engine, you can make the car faster! We measured 10.7 whp at 6960 rpm and 8.1 lb-ft of torque at 5550 on a 1995 M3. Race pulleys deliver even more power. 

Another "no-downside" upgrade, we even include a new belt. Total install time for a 3-piece pulley set should be around 1.5 hours. We offer three options in pulleys:
1.) No alternator pulley included - for cars with big amps and powerful stereo systems that need the extra juice.
2.) Street Power Pulleys - our most popular option with no downside!
3.) Race Power Pulleys - delivering 15 "free" horsepower, this set underdrives the water pump, power steering pulley, and alternator for lower temps, less wear, and more power. Not for street use. 


Intake Air Temperature Relocation Kit
Looking to maximize your power gains? Add a Turner IAT Relocation to combat power-robbing heat soak - the only true plug-and-play solution available. Heat soak is a real plague on consistent power for a stock or tuned vehicle. Click here to read more about our IAT relocation kit.

This item fits the following BMWs:
2001-2006 E46 BMW M3

Turner Motorsport Power Pulley Kit - E36 325/M3, E34 525i (M50), MZ3 (S52)
Turner Motorsport
Part Number: PPK-E36

Underdrive Power Pulleys work to 'free up' horsepower. Any accessory that spins from the main drive belt is using up power. That's power that could otherwise be used to move the car. By giving some of that power back to the engine, you can make the car faster! It's like FREE HORSEPOWER! We measured 10.7 whp at 6960 rpm and 8.1 lb-ft of torque at 5550 on a 1995 M3.

Underdrive pulleys for your BMW will slow down engine-mounted accessories - the water pump, power steering pump, and alternator*. These systems contribute to 'parasitic losses' - power lost from what the engine could produce if it did not have these systems. Since less energy is used to move them, that power is transferred back to the engine and used to propel the car. Our pulleys give a 10-20% reduction in rotation, releasing up to 11hp on most BMW six-cylinder engines. There's also a small but noticeable improvement in throttle response too! We have done extensive testing and development work, both on and off the track, to ensure that the accessory systems function as they should. On our Racing pulley kits we actually underdrive certain components more so we feel our Street pulleys are an ideal compromise between power/torque gains, reliability, and system performance. Our pulley kits have been on the market for over ten years, and used in all of our own cars, with zero component failures related to their use.

Our pulleys are made from T-6061 aluminum and finished in a durable black hard anodize that is very resistant to wear, chemical exposure, and heat. We designed our pulleys to look similar to the factory parts but also to be stronger and, in most cases, slightly lighter too. For example, a Turner alternator pulley is less than half the weight of the stock steel pulley! With our hardcoat aluminum you will never have to worry about a serious failure of a stock plastic pulley. A 'stealth' approach to aesthetics was our goal and we let the results speak for the pulley design. Installation is straight forward and easy with simple hand tools. Removal of the fan is required for access to the front of the engine. Total install time for a 3-piece pulley set should be around 1.5 hours. A new longer belt is included and we also recommend replacing the separate A/C belt, belt tensioners, and the guide and deflection pulleys at the same time.

Alternator Pulley Options
(click to expand)
Bosch or Valeo? BMW built your car with either a Bosch or Valeo brand alternator. Unfortunately, the pulley is not the same for both brands. The brand is usually printed on the black plastic cover of the alternator but may be facing the frame rail or the ground. If you know which brand you have, select your option below and we'll send you the correct alternator pulley for your BMW. Don't know which you have? NO PROBLEM! We can send you both. The 2nd pulley costs $40 but you will receive a refund once we get the un-used pulley back (return shipping not included).
Aftermarket Stereo Systems
(click to expand)
We offer our kits in two different ways: the full Power Pulley Kit with all 3 pulleys or a 2 pulley kit if you do not wish to underdrive your alternator (for large stereo systems or other battery-draining modifications). Our kits have been tested for compatability with the factory premium stereo systems (Harmon Kardon, etc). But any major alterations or upgrades from the factory system will work best with our 2 pulley kit and no underdriving of the alternator. For all stock stereo systems the 3 pulley set is recommended because the Turner alternator pulley will help make more power and is also much lighter than the stock pulley.


Additional Info
Clickhere for example dyno graph

Click here for installation instructions.


This underdrive pulley kit fits the following BMW:
1991-1995 E34 5 Series 525i without servotronic steering and without self-leveling
1992-1995 E36 3 Series 325i, 325is, 325ic
1995-1995 E36 M3 3.0 liter (S50) **US models only, coupe
1996-1999 E36 M3 3.2 liter (S52) **US models only, coupe, sedan, convertible
1997-2000 MZ3 Z3 M Roadster & Z3 M Coupe (US models, S52US)
Turner Motorsport Power Pulley Kit - E39 528i 99-00
Turner Motorsport
Part Number: PPK-E39-M52TU

Underdrive Power Pulleys work to 'free up' horsepower. Any accessory that spins from the main drive belt is using up power. That's power that could otherwise be used to move the car. By giving some of that power back to the engine, you can make the car faster! It's like FREE HORSEPOWER!

Underdrive pulleys for your BMW will slow down engine-mounted accessories - the water pump, power steering pump, and alternator*. These systems contribute to 'parasitic losses' - power lost from what the engine could produce if it did not have these systems. Since less energy is used to move them, that power is transferred back to the engine and used to propel the car. Our pulleys give a 10-20% reduction in rotation, releasing up to 11hp on most BMW six-cylinder engines. There's also a small but noticeable improvement in throttle response too! We have done extensive testing and development work, both on and off the track, to ensure that the accessory systems function as they should. On our Racing pulley kits we actually underdrive certain components more so we feel our Street pulleys are an ideal compromise between power/torque gains, reliability, and system performance. Our pulley kits have been on the market for over ten years, and used in all of our own cars, with zero component failures related to their use.

Our pulleys are made from T-6061 aluminum and finished in a durable black hard anodize that is very resistant to wear, chemical exposure, and heat. We designed our pulleys to look similar to the factory parts but also to be stronger and, in most cases, slightly lighter too. For example, a Turner alternator pulley is less than half the weight of the stock steel pulley! With our hardcoat aluminum you will never have to worry about a serious failure of a stock plastic pulley. A 'stealth' approach to aesthetics was our goal and we let the results speak for the pulley design. Installation is straight forward and easy with simple hand tools. Removal of the fan is required for access to the front of the engine. Total install time for a 3-piece pulley set should be around 1.5 hours. A new longer belt is included and we also recommend replacing the separate A/C belt, belt tensioners, and the guide and deflection pulleys at the same time.

* Alternator Pulley Options

Bosch or Valeo? BMW built your car with either a Bosch or Valeo brand alternator. Unfortunately, the pulley is not the same for both brands. The brand is usually printed on the black plastic cover of the alternator but may be facing the frame rail or the ground. If you know which brand you have, select your option below and we'll send you the correct alternator pulley for your BMW. Don't know which you have? NO PROBLEM! We can send you both. The 2nd pulley costs $40 but you will receive a refund once we get the un-used pulley back (return shipping not included).

Stereo Systems. We offer our kits in two different ways: the full Power Pulley Kit with all 3 pulleys or as a 2 pulley kit if you do not wish to underdrive your alternator (for large stereo systems or other critical-charging modifications). Our kits have been tested for compatability with the factory premium stereo systems (Harmon Kardon, etc). But any major upgrades from the factory premium systems will work best with our 2 pulley kit and no underdriving of the alternator. For all stock stereo systems the full 3-piece set is recommended because the Turner alternator pulley will help make more power and is also much lighter than the stock pulley.

Additional Info

Clickhere for example dyno graph

Click here for installation instructions.

Turner Pulley Kit contents:

 

  • Turner water pump pulley
  • Turner power steering pump pulley
  • Turner alternator pulley
  • new extended length belt
  • instructions



     
  •  
  • This underdrive pulley kit fits the following BMW:
    1999-2000 E39 BMW 528i

 

Qty
Starting At $242.95
Ships on Jan 2, 2018
Free Shipping Free Shipping
Add to Wish List
Turner Motorsport Power Pulley Upgrade Kit - Z3 2.8 97-98
Turner Motorsport
Part Number: PPK-Z3

Underdrive Power Pulleys work to 'free up' horsepower. Any accessory that spins from the main drive belt is using up power. That's power that could otherwise be used to move the car. By giving some of that power back to the engine, you can make the car faster! It's like FREE HORSEPOWER !

Underdrive pulleys for your BMW will slow down engine-mounted accessories - the water pump, power steering pump, and alternator*. These systems contribute to 'parasitic losses' - power lost from what the engine could produce if it did not have these systems. Since less energy is used to move them, that power is transferred back to the engine and used to propel the car. Our pulleys give a 10-20% reduction in rotation, releasing up to 11hp on most BMW six-cylinder engines. There's also a small but noticeable improvement in throttle response too! We have done extensive testing and development work, both on and off the track, to ensure that the accessory systems function as they should. On our Racing pulley kits we actually underdrive certain components more so we feel our Street pulleys are an ideal compromise between power/torque gains, reliability, and system performance. Our pulley kits have been on the market for over ten years, and used in all of our own cars, with zero component failures related to their use.

Our pulleys are made from T-6061 aluminum and finished in a durable black hard anodize that is very resistant to wear, chemical exposure, and heat. We designed our pulleys to look similar to the factory parts but also to be stronger and, in most cases, slightly lighter too. For example, a Turner alternator pulley is less than half the weight of the stock steel pulley! With our hardcoat aluminum you will never have to worry about a serious failure of a stock plastic pulley. A 'stealth' approach to aesthetics was our goal and we let the results speak for the pulley design. Installation is straight forward and easy with simple hand tools. Removal of the fan is required for access to the front of the engine. Total install time for a 3-piece pulley set should be around 1.5 hours. A new longer belt is included and we also recommend replacing the separate A/C belt, belt tensioners, and the guide and deflection pulleys at the same time.

* Alternator Pulley Options
Bosch or Valeo? BMW built your car with either a Bosch or Valeo brand alternator. Unfortunately, the pulley is not the same for both brands. The brand is usually printed on the black plastic cover of the alternator but may be facing the frame rail or the ground. If you know which brand you have, select your option below and we'll send you the correct alternator pulley for your BMW. Don't know which you have? NO PROBLEM! We can send you both. The 2nd pulley costs $40 but you will receive a refund once we get the un-used pulley back (return shipping not included).

Stereo Systems. We offer our kits in two different ways: the full Power Pulley Kit with all 3 pulleys or a 2 pulley kit if you do not wish to underdrive your alternator (for large stereo systems or other battery-draining modifications). Our kits have been tested for compatability with the factory premium stereo systems (Harmon Kardon, etc). But any major alterations or upgrades from the factory system will work best with our 2 pulley kit and no underdriving of the alternator. For all stock stereo systems the 3 pulley set is recommended because the Turner alternator pulley will help make more power and is also much lighter than the stock pulley.

Additional Info
Clickhere for example dyno graph

Click here for installation instructions.


This underdrive pulley kit fits the following BMW:
1997-1998 Z3 BMW Z3 2.8
Qty
Starting At $242.95
Ships on Jan 2, 2018
Free Shipping Free Shipping
Add to Wish List
Turner Motorsport Power Pulley Kit - E90/E92/E93 M3
Turner Motorsport
Part Number: TMS1805


Get MORE HORSEPOWER and TORQUE on your 2008, 2009 and newer M3 coupe, sedan or convertible by replacing the stock crank pulley with this specially designed performance version. The Power Pulley reduces rotational mass and safely under drives your belt driven auxiliaries for reduced parasitic power loss. The end result: More power to your M3's rear wheels! Designed to give the best performance benefit with no sacrifices or compromises to your BMW's reliability. These have been tested on hundreds of cars before public release and there are simply NO DOWNSIDES to this upgrade.

CNC machined using aircraft grade 6061 aluminum billet, and anodized with a stealthy black coating. Others may advertise "their" crank pulley boasting higher numbers (using a smaller pulley profile), but we have concluded that for street and track driven M3s, this is the best size and design to ensure proper engine temp and auxiliary functionality. As the S65 M3 V8 engine doesn't use a traditional harmonic balancer, all factory harmonics and dampening are fully and properly retained. We've found this pulley alone adds 10 to 14 HP and 7 to 9 Ft/lbs Torque on a stock M3 with no other mods(!!).

The E9x M3 Power Pulley Kit includes:
(1) Underdrive Crank Pulley
(1) Correctly Sized Drive Belt
(6) Allen Head Bolts
(1) Installation instructions

Fits the following BMWs:
2008+ E90/E92/E93 M3 6 Speed Manual Transmission
2008+ E90/E92/E93 M3 DCT Double Clutch Transmission

This kit uses readily-available, off-the-shelf belts - no difficult to find belts here! When you're ready for new belts, sets for 2008 manual transmission vehicles can be found here, and 2009+ manual transmission and all DCT vehicles can be found here


Please select the year/transmission of your M3 (below) so that we may send you the proper parts for your application. There are specific kits for 2008 vs 2009+ model years, as well as manual transmission versus DCT sequential gearboxes. Choose below.

Turner Motorsport Power Pulley Kit - E46 M3
Turner Motorsport
Part Number: PPK-S54

Underdrive Power Pulleys work to 'free up' horsepower. Any accessory that spins from the main drive belt is using up power. That's power that could otherwise be used to move the car. By giving some of that power back to the engine, you can make the car faster! It's like FREE HORSEPOWER !

Underdrive pulleys for your BMW will slow down engine-mounted accessories - the water pump, power steering pump, and alternator*. These systems contribute to 'parasitic losses' - power lost from what the engine could produce if it did not have these systems. Since less energy is used to move them, that power is transferred back to the engine and used to propel the car. Our pulleys give a 10-20% reduction in rotation, releasing 10hp on the E46 M3. There's also a small but noticeable improvement in throttle response too! We have done extensive testing and development work, both on and off the track, to ensure that the accessory systems function as they should. On our Racing pulley kits we actually underdrive certain components more so we feel our Street pulleys are an ideal compromise between power/torque gains, reliability, and system performance. Our pulley kits have been on the market for over ten years, and used in all of our own cars, with zero component failures related to their use.

Our pulleys are made from T-6061 aluminum and finished in a durable black hard anodize that is very resistant to wear, chemical exposure, and heat. We designed our pulleys to look similar to the factory parts but also to be stronger and, in most cases, slightly lighter too. For example, a Turner alternator pulley is less than half the weight of the stock steel pulley! With our hardcoat aluminum you will never have to worry about a serious failure of a stock plastic pulley. A 'stealth' approach to aesthetics was our goal and we let the results speak for the pulley design. Installation is straight forward and easy with simple hand tools. Removal of the fan is required for access to the front of the engine. Total install time for a 3-piece pulley set should be around 1.5 hours. A new longer belt is included and we also recommend replacing the separate A/C belt, belt tensioners, and the guide and deflection pulleys at the same time.

* Alternator Pulley Options
Stereo Systems. We offer our kits in two different ways: the full Power Pulley Kit with all 3 pulleys or a 2 pulley kit if you do not wish to underdrive your alternator (for large stereo systems or other battery-draining modifications). Our kits have been tested for compatability with the factory premium stereo systems (Harmon Kardon, etc). But any major alterations or upgrades from the factory system will work best with our 2 pulley kit and no underdriving of the alternator. For all stock stereo systems the 3 pulley set is recommended because the Turner alternator pulley will help make more power and is also much lighter than the stock pulley.

Additional Info
ClickHere for example Dyno Chart

Click here for installation instructions.


This underdrive pulley kit fits the following BMW:
2001-2006 E46 M3 coupe & convertible
2001-2002 MZ3 Z3 M Roadster / Z3 M Coupe (S54 engine)
Qty
Starting At $269.95
In Stock
Free Shipping Free Shipping
Add to Wish List
Turner Motorsport Power Pulley Kit - E36 323i/328i
Turner Motorsport
Part Number: PPK-E36328

Underdrive Power Pulleys work to 'free up' horsepower. Any accessory that spins from the main drive belt is using up power. That's power that could otherwise be used to move the car. By giving some of that power back to the engine, you can make the car faster! It's like FREE HORSEPOWER ! We measured 10.7 whp at 6960 rpm and 8.1 lb-ft of torque at 5550 on a 1995 M3.

Underdrive pulleys for your BMW will slow down engine-mounted accessories - the water pump, power steering pump, and alternator*. These systems contribute to 'parasitic losses' - power lost from what the engine could produce if it did not have these systems. Since less energy is used to move them, that power is transferred back to the engine and used to propel the car. Our pulleys give a 10-20% reduction in rotation, releasing up to 11hp on most BMW six-cylinder engines. There's also a small but noticeable improvement in throttle response too! We have done extensive testing and development work, both on and off the track, to ensure that the accessory systems function as they should. On our Racing pulley kits we actually underdrive certain components more so we feel our Street pulleys are an ideal compromise between power/torque gains, reliability, and system performance. Our pulley kits have been on the market for over ten years, and used in all of our own cars, with zero component failures related to their use.

Our pulleys are made from T-6061 aluminum and finished in a durable black hard anodize that is very resistant to wear, chemical exposure, and heat. We designed our pulleys to look similar to the factory parts but also to be stronger and, in most cases, slightly lighter too. For example, a Turner alternator pulley is less than half the weight of the stock steel pulley! With our hardcoat aluminum you will never have to worry about a serious failure of a stock plastic pulley. A 'stealth' approach to aesthetics was our goal and we let the results speak for the pulley design. Installation is straight forward and easy with simple hand tools. Removal of the fan is required for access to the front of the engine. Total install time for a 3-piece pulley set should be around 1.5 hours. A new longer belt is included and we also recommend replacing the separate A/C belt, belt tensioners, and the guide and deflection pulleys at the same time.

* Alternator Pulley Options
Bosch or Valeo? BMW built your car with either a Bosch or Valeo brand alternator. Unfortunately, the pulley is not the same for both brands. The brand is usually printed on the black plastic cover of the alternator but may be facing the frame rail or the ground. If you know which brand you have, select your option below and we'll send you the correct alternator pulley for your BMW. Don't know which you have? NO PROBLEM! We can send you both. The 2nd pulley costs $40 but you will receive a refund once we get the un-used pulley back (return shipping not included).

Stereo Systems. We offer our kits in two different ways: the full Power Pulley Kit with all 3 pulleys or a 2 pulley kit if you do not wish to underdrive your alternator (for large stereo systems or other battery-draining modifications). Our kits have been tested for compatability with the factory premium stereo systems (Harmon Kardon, etc). But any major alterations or upgrades from the factory system will work best with our 2 pulley kit and no underdriving of the alternator. For all stock stereo systems the 3 pulley set is recommended because the Turner alternator pulley will help make more power and is also much lighter than the stock pulley.

Additional Info
Clickhere for example dyno graph

Click here for installation instructions.


This underdrive pulley kit fits the following BMW:
1996-1999 E36 BMW 323is 323ic 328i 328is 328ic
Qty
Starting At $242.95
Ships on Jan 2, 2018
Free Shipping Free Shipping
Add to Wish List
Turner Motorsport Power Pulley Upgrade Kit - Z3 3.0i 01-02
Turner Motorsport
Part Number: PPK-Z3-30

Underdrive Power Pulleys work to 'free up' horsepower. Any accessory that spins from the main drive belt is using up power. That's power that could otherwise be used to move the car. By giving some of that power back to the engine, you can make the car faster! It's like FREE HORSEPOWER !

Underdrive pulleys for your BMW will slow down engine-mounted accessories - the water pump, power steering pump, and alternator*. These systems contribute to 'parasitic losses' - power lost from what the engine could produce if it did not have these systems. Since less energy is used to move them, that power is transferred back to the engine and used to propel the car. Our pulleys give a 10-20% reduction in rotation, releasing up to 11hp on most BMW six-cylinder engines. There's also a small but noticeable improvement in throttle response too! We have done extensive testing and development work, both on and off the track, to ensure that the accessory systems function as they should. On our Racing pulley kits we actually underdrive certain components more so we feel our Street pulleys are an ideal compromise between power/torque gains, reliability, and system performance. Our pulley kits have been on the market for over ten years, and used in all of our own cars, with zero component failures related to their use.

Our pulleys are made from T-6061 aluminum and finished in a durable black hard anodize that is very resistant to wear, chemical exposure, and heat. We designed our pulleys to look similar to the factory parts but also to be stronger and, in most cases, slightly lighter too. For example, a Turner alternator pulley is less than half the weight of the stock steel pulley! With our hardcoat aluminum you will never have to worry about a serious failure of a stock plastic pulley. A 'stealth' approach to aesthetics was our goal and we let the results speak for the pulley design. Installation is straight forward and easy with simple hand tools. Removal of the fan is required for access to the front of the engine. Total install time for a 3-piece pulley set should be around 1.5 hours. A new longer belt is included and we also recommend replacing the separate A/C belt, belt tensioners, and the guide and deflection pulleys at the same time.

* Alternator Pulley Options
Bosch or Valeo?  BMW built your car with either a Bosch or Valeo brand alternator. Unfortunately, the pulley is not the same for both brands. The brand is usually printed on the black plastic cover of the alternator but may be facing the frame rail or the ground. If you know which brand you have, select your option below and we'll send you the correct alternator pulley for your BMW. Don't know which you have? NO PROBLEM! We can send you both. The 2nd pulley costs $40 but you will receive a refund once we get the un-used pulley back (return shipping not included).

Stereo Systems. We offer our kits in two different ways: the full Power Pulley Kit with all 3 pulleys or a 2 pulley kit if you do not wish to underdrive your alternator (for large stereo systems or other battery-draining modifications). Our kits have been tested for compatability with the factory premium stereo systems (Harmon Kardon, etc). But any major alterations or upgrades from the factory system will work best with our 2 pulley kit and no underdriving of the alternator. For all stock stereo systems the 3 pulley set is recommended because the Turner alternator pulley will help make more power and is also much lighter than the stock pulley.

Additional Info
Clickhere for example dyno graph

Click here for installation instructions.


This underdrive pulley kit fits the following BMW:
2001-2002 Z3 BMW Z3 3.0i
Turner Motorsport Power Pulley Upgrade Kit - Z3 3.0i 01-02
Turner Motorsport
Part Number: PPK-Z3-30

Underdrive Power Pulleys work to 'free up' horsepower. Any accessory that spins from the main drive belt is using up power. That's power that could otherwise be used to move the car. By giving some of that power back to the engine, you can make the car faster! It's like FREE HORSEPOWER !

Underdrive pulleys for your BMW will slow down engine-mounted accessories - the water pump, power steering pump, and alternator*. These systems contribute to 'parasitic losses' - power lost from what the engine could produce if it did not have these systems. Since less energy is used to move them, that power is transferred back to the engine and used to propel the car. Our pulleys give a 10-20% reduction in rotation, releasing up to 11hp on most BMW six-cylinder engines. There's also a small but noticeable improvement in throttle response too! We have done extensive testing and development work, both on and off the track, to ensure that the accessory systems function as they should. On our Racing pulley kits we actually underdrive certain components more so we feel our Street pulleys are an ideal compromise between power/torque gains, reliability, and system performance. Our pulley kits have been on the market for over ten years, and used in all of our own cars, with zero component failures related to their use.

Our pulleys are made from T-6061 aluminum and finished in a durable black hard anodize that is very resistant to wear, chemical exposure, and heat. We designed our pulleys to look similar to the factory parts but also to be stronger and, in most cases, slightly lighter too. For example, a Turner alternator pulley is less than half the weight of the stock steel pulley! With our hardcoat aluminum you will never have to worry about a serious failure of a stock plastic pulley. A 'stealth' approach to aesthetics was our goal and we let the results speak for the pulley design. Installation is straight forward and easy with simple hand tools. Removal of the fan is required for access to the front of the engine. Total install time for a 3-piece pulley set should be around 1.5 hours. A new longer belt is included and we also recommend replacing the separate A/C belt, belt tensioners, and the guide and deflection pulleys at the same time.

* Alternator Pulley Options
Bosch or Valeo?  BMW built your car with either a Bosch or Valeo brand alternator. Unfortunately, the pulley is not the same for both brands. The brand is usually printed on the black plastic cover of the alternator but may be facing the frame rail or the ground. If you know which brand you have, select your option below and we'll send you the correct alternator pulley for your BMW. Don't know which you have? NO PROBLEM! We can send you both. The 2nd pulley costs $40 but you will receive a refund once we get the un-used pulley back (return shipping not included).

Stereo Systems. We offer our kits in two different ways: the full Power Pulley Kit with all 3 pulleys or a 2 pulley kit if you do not wish to underdrive your alternator (for large stereo systems or other battery-draining modifications). Our kits have been tested for compatability with the factory premium stereo systems (Harmon Kardon, etc). But any major alterations or upgrades from the factory system will work best with our 2 pulley kit and no underdriving of the alternator. For all stock stereo systems the 3 pulley set is recommended because the Turner alternator pulley will help make more power and is also much lighter than the stock pulley.

Additional Info
Clickhere for example dyno graph

Click here for installation instructions.


This underdrive pulley kit fits the following BMW:
2001-2002 Z3 BMW Z3 3.0i
Turner Motorsport Power Pulley Kit - E39 528i 97-98
Turner Motorsport
Part Number: PPK-E39

Underdrive Power Pulleys work to 'free up' horsepower. Any accessory that spins from the main drive belt is using up power. That's power that could otherwise be used to move the car. By giving some of that power back to the engine, you can make the car faster! It's like FREE HORSEPOWER!

Underdrive pulleys for your BMW will slow down engine-mounted accessories - the water pump, power steering pump, and alternator*. These systems contribute to 'parasitic losses' - power lost from what the engine could produce if it did not have these systems. Since less energy is used to move them, that power is transferred back to the engine and used to propel the car. Our pulleys give a 10-20% reduction in rotation, releasing up to 11hp on most BMW six-cylinder engines. There's also a small but noticeable improvement in throttle response too! We have done extensive testing and development work, both on and off the track, to ensure that the accessory systems function as they should. On our Racing pulley kits we actually underdrive certain components more so we feel our Street pulleys are an ideal compromise between power/torque gains, reliability, and system performance. Our pulley kits have been on the market for over ten years, and used in all of our own cars, with zero component failures related to their use.

Our pulleys are made from T-6061 aluminum and finished in a durable black hard anodize that is very resistant to wear, chemical exposure, and heat. We designed our pulleys to look similar to the factory parts but also to be stronger and, in most cases, slightly lighter too. For example, a Turner alternator pulley is less than half the weight of the stock steel pulley! With our hardcoat aluminum you will never have to worry about a serious failure of a stock plastic pulley. A 'stealth' approach to aesthetics was our goal and we let the results speak for the pulley design. Installation is straight forward and easy with simple hand tools. Removal of the fan is required for access to the front of the engine. Total install time for a 3-piece pulley set should be around 1.5 hours. A new longer belt is included and we also recommend replacing the separate A/C belt, belt tensioners, and the guide and deflection pulleys at the same time.

* Alternator Pulley Options

Bosch or Valeo? BMW built your car with either a Bosch or Valeo brand alternator. Unfortunately, the pulley is not the same for both brands. The brand is usually printed on the black plastic cover of the alternator but may be facing the frame rail or the ground. If you know which brand you have, select your option below and we'll send you the correct alternator pulley for your BMW. Don't know which you have? NO PROBLEM! We can send you both. The 2nd pulley costs $40 but you will receive a refund once we get the un-used pulley back (return shipping not included).

Stereo Systems. We offer our kits in two different ways: the full Power Pulley Kit with all 3 pulleys or as a 2 pulley kit if you do not wish to underdrive your alternator (for large stereo systems or other critical-charging modifications). Our kits have been tested for compatability with the factory premium stereo systems (Harmon Kardon, etc). But any major upgrades from the factory premium systems will work best with our 2 pulley kit and no underdriving of the alternator. For all stock stereo systems the full 3-piece set is recommended because the Turner alternator pulley will help make more power and is also much lighter than the stock pulley.

Additional Info

Clickhere for example dyno graph

Click here for installation instructions.

Turner Pulley Kit contents:

 

  • Turner water pump pulley
  • Turner power steering pump pulley
  • Turner alternator pulley
  • new extended length belt
  • instructions


     
  • This underdrive pulley kit fits the following BMW:
    1997-1998 E39 BMW 528i

 

Qty
Starting At $242.95
Ships on Jan 2, 2018
Free Shipping Free Shipping
Add to Wish List
Turner Motorsport Power Pulley Kit - E46 325i/330i
Turner Motorsport
Part Number: PPK-E46-M54

Underdrive Power Pulleys work to 'free up' horsepower. Any accessory that spins from the main drive belt is using up power. That's power that could otherwise be used to move the car. By giving some of that power back to the engine, you can make the car faster! It's like FREE HORSEPOWER !

Underdrive pulleys for your BMW will slow down engine-mounted accessories - the water pump, power steering pump, and alternator*. These systems contribute to 'parasitic losses' - power lost from what the engine could produce if it did not have these systems. Since less energy is used to move them, that power is transferred back to the engine and used to propel the car. Our pulleys give a 5-10% reduction in rotation, releasing up to 11hp on most BMW six-cylinder engines. There's also a small but noticeable improvement in throttle response too! We have done extensive testing and development work, both on and off the track, to ensure that the accessory systems function as they should. On our Racing pulley kits we actually underdrive certain components more so we feel our Street pulleys are an ideal compromise between power/torque gains, reliability, and system performance. Our pulley kits have been on the market for over ten years, and used in all of our own cars, with zero component failures related to their use.

Our pulleys are made from T-6061 aluminum and finished in a durable black hard anodize that is very resistant to wear, chemical exposure, and heat. We designed our pulleys to look similar to the factory parts but also to be stronger and, in most cases, slightly lighter too. For example, a Turner alternator pulley is less than half the weight of the stock steel pulley! With our hardcoat aluminum you will never have to worry about a serious failure of a stock plastic pulley. A 'stealth' approach to aesthetics was our goal and we let the results speak for the pulley design. Installation is straight forward and easy with simple hand tools. Removal of the fan is required for access to the front of the engine. Total install time for a 3-piece pulley set should be around 1.5 hours. A new longer belt is included and we also recommend replacing the separate A/C belt, belt tensioners, and the guide and deflection pulleys at the same time.

* Alternator Pulley Options
Bosch or Valeo? BMW built your car with either a Bosch or Valeo brand alternator. Unfortunately, the pulley is not the same for both brands. The brand is usually printed on the black plastic cover of the alternator but may be facing the frame rail or the ground. If you know which brand you have, select your option below and we'll send you the correct alternator pulley for your BMW. Don't know which you have? NO PROBLEM! We can send you both. The 2nd pulley costs $40 but you will receive a refund once we get the un-used pulley back (return shipping not included).

Stereo Systems. We offer our kits in two different ways: the full Power Pulley Kit with all 3 pulleys or a 2 pulley kit if you do not wish to underdrive your alternator (for large stereo systems or other battery-draining modifications). Our kits have been tested for compatability with the factory premium stereo systems (Harmon Kardon, etc). But any major alterations or upgrades from the factory system will work best with our 2 pulley kit and no underdriving of the alternator. For all stock stereo systems the 3 pulley set is recommended because the Turner alternator pulley will help make more power and is also much lighter than the stock pulley.

Additional Info
Clickhere for example dyno graph

Click here for installation instructions.


This underdrive pulley kit fits the following BMW:
2001-2006 E46 BMW 325i 325ci 325xi 330i 330ci 330xi
Qty
Starting At $242.95
Ships on Jan 2, 2018
Free Shipping Free Shipping
Add to Wish List
Turner Motorsport Power Pulley Upgrade Kit - Z3 2.3/2.8 99-00
Turner Motorsport
Part Number: PPK-Z3-M52TU

Underdrive Power Pulleys work to 'free up' horsepower. Any accessory that spins from the main drive belt is using up power. That's power that could otherwise be used to move the car. By giving some of that power back to the engine, you can make the car faster! It's like FREE HORSEPOWER !

Underdrive pulleys for your BMW will slow down engine-mounted accessories - the water pump, power steering pump, and alternator*. These systems contribute to 'parasitic losses' - power lost from what the engine could produce if it did not have these systems. Since less energy is used to move them, that power is transferred back to the engine and used to propel the car. Our pulleys give a 10-20% reduction in rotation, releasing up to 11hp on most BMW six-cylinder engines. There's also a small but noticeable improvement in throttle response too! We have done extensive testing and development work, both on and off the track, to ensure that the accessory systems function as they should. On our Racing pulley kits we actually underdrive certain components more so we feel our Street pulleys are an ideal compromise between power/torque gains, reliability, and system performance. Our pulley kits have been on the market for over ten years, and used in all of our own cars, with zero component failures related to their use.

Our pulleys are made from T-6061 aluminum and finished in a durable black hard anodize that is very resistant to wear, chemical exposure, and heat. We designed our pulleys to look similar to the factory parts but also to be stronger and, in most cases, slightly lighter too. For example, a Turner alternator pulley is less than half the weight of the stock steel pulley! With our hardcoat aluminum you will never have to worry about a serious failure of a stock plastic pulley. A 'stealth' approach to aesthetics was our goal and we let the results speak for the pulley design. Installation is straight forward and easy with simple hand tools. Removal of the fan is required for access to the front of the engine. Total install time for a 3-piece pulley set should be around 1.5 hours. A new longer belt is included and we also recommend replacing the separate A/C belt, belt tensioners, and the guide and deflection pulleys at the same time.

* Alternator Pulley Options
Bosch or Valeo? BMW built your car with either a Bosch or Valeo brand alternator. Unfortunately, the pulley is not the same for both brands. The brand is usually printed on the black plastic cover of the alternator but may be facing the frame rail or the ground. If you know which brand you have, select your option below and we'll send you the correct alternator pulley for your BMW. Don't know which you have? NO PROBLEM! We can send you both. The 2nd pulley costs $40 but you will receive a refund once we get the un-used pulley back (return shipping not included).

Stereo Systems. We offer our kits in two different ways: the full Power Pulley Kit with all 3 pulleys or a 2 pulley kit if you do not wish to underdrive your alternator (for large stereo systems or other battery-draining modifications). Our kits have been tested for compatability with the factory premium stereo systems (Harmon Kardon, etc). But any major alterations or upgrades from the factory system will work best with our 2 pulley kit and no underdriving of the alternator. For all stock stereo systems the 3 pulley set is recommended because the Turner alternator pulley will help make more power and is also much lighter than the stock pulley.

Additional Info
Clickhere for example dyno graph

Click here for installation instructions.


This underdrive pulley kit fits the following BMW:
1999-2000 Z3 BMW Z3 2.3 Z3 2.8
Qty
Starting At $242.95
Ships on Jan 2, 2018
Free Shipping Free Shipping
Add to Wish List
Turner Motorsport Power Pulley Upgrade Kit - Z4 2.5/3.0
Turner Motorsport
Part Number: PPK-Z4

Underdrive Power Pulleys work to 'free up' horsepower. Any accessory that spins from the main drive belt is using up power. That's power that could otherwise be used to move the car. By giving some of that power back to the engine, you can make the car faster! It's like FREE HORSEPOWER !

Underdrive pulleys for your BMW will slow down engine-mounted accessories - the water pump and alternator. These systems contribute to 'parasitic losses' - power lost from what the engine could produce if it did not have these systems. Since less energy is used to move them, that power is transferred back to the engine and used to propel the car. Our pulleys give a 10-20% reduction in rotation, releasing up to 11hp on most BMW six-cylinder engines. There's also a small but noticeable improvement in throttle response too! We have done extensive testing and development work, both on and off the track, to ensure that the accessory systems function as they should. On our Racing pulley kits we actually underdrive certain components more so we feel our Street pulleys are an ideal compromise between power/torque gains, reliability, and system performance. Our pulley kits have been on the market for over ten years, and used in all of our own cars, with zero component failures related to their use.

Our pulleys are made from T-6061 aluminum and finished in a durable black hard anodize that is very resistant to wear, chemical exposure, and heat. We designed our pulleys to look similar to the factory parts but also to be stronger and, in most cases, slightly lighter too. For example, a Turner alternator pulley is less than half the weight of the stock steel pulley! With our hardcoat aluminum you will never have to worry about a serious failure of a stock plastic pulley. A 'stealth' approach to aesthetics was our goal and we let the results speak for the pulley design. Installation is straight forward and easy with simple hand tools. Removal of the fan is required for access to the front of the engine. Total install time should be around 1.5 hours. A new longer belt is included and we also recommend replacing the separate A/C belt, belt tensioners, and the guide and deflection pulleys at the same time.

Additional Info
Clickhere for example dyno graph

Click here for installation instructions.

Turner Pulley Kit contents:
  • Turner water pump pulley
  • Turner alternator pulley
  • new extended length belt
  • instructions

    This underdrive pulley kit fits the following BMW:
    2003, 2004, 2005 Z4 2.5 roadster/coupe
    2003, 2004, 2005 Z4 3.0 roadster/coupe
  • Qty
    $165.00
    In Stock
    Free Shipping Free Shipping
    Add to Wish List
    Turner Motorsport Power Pulley Upgrade Kit - Z3 2.5i 01-02
    Turner Motorsport
    Part Number: PPK-Z3-25

    Underdrive Power Pulleys work to 'free up' horsepower. Any accessory that spins from the main drive belt is using up power. That's power that could otherwise be used to move the car. By giving some of that power back to the engine, you can make the car faster! It's like FREE HORSEPOWER !

    Underdrive pulleys for your BMW will slow down engine-mounted accessories - the water pump, power steering pump, and alternator*. These systems contribute to 'parasitic losses' - power lost from what the engine could produce if it did not have these systems. Since less energy is used to move them, that power is transferred back to the engine and used to propel the car. Our pulleys give a 10-20% reduction in rotation, releasing up to 11hp on most BMW six-cylinder engines. There's also a small but noticeable improvement in throttle response too! We have done extensive testing and development work, both on and off the track, to ensure that the accessory systems function as they should. On our Racing pulley kits we actually underdrive certain components more so we feel our Street pulleys are an ideal compromise between power/torque gains, reliability, and system performance. Our pulley kits have been on the market for over ten years, and used in all of our own cars, with zero component failures related to their use.

    Our pulleys are made from T-6061 aluminum and finished in a durable black hard anodize that is very resistant to wear, chemical exposure, and heat. We designed our pulleys to look similar to the factory parts but also to be stronger and, in most cases, slightly lighter too. For example, a Turner alternator pulley is less than half the weight of the stock steel pulley! With our hardcoat aluminum you will never have to worry about a serious failure of a stock plastic pulley. A 'stealth' approach to aesthetics was our goal and we let the results speak for the pulley design. Installation is straight forward and easy with simple hand tools. Removal of the fan is required for access to the front of the engine. Total install time for a 3-piece pulley set should be around 1.5 hours. A new longer belt is included and we also recommend replacing the separate A/C belt, belt tensioners, and the guide and deflection pulleys at the same time.

    * Alternator Pulley Options
    Bosch or Valeo? BMW built your car with either a Bosch or Valeo brand alternator. Unfortunately, the pulley is not the same for both brands. The brand is usually printed on the black plastic cover of the alternator but may be facing the frame rail or the ground. If you know which brand you have, select your option below and we'll send you the correct alternator pulley for your BMW. Don't know which you have? NO PROBLEM! We can send you both. The 2nd pulley costs $40 but you will receive a refund once we get the un-used pulley back (return shipping not included).

    Stereo Systems. We offer our kits in two different ways: the full Power Pulley Kit with all 3 pulleys or a 2 pulley kit if you do not wish to underdrive your alternator (for large stereo systems or other battery-draining modifications). Our kits have been tested for compatability with the factory premium stereo systems (Harmon Kardon, etc). But any major alterations or upgrades from the factory system will work best with our 2 pulley kit and no underdriving of the alternator. For all stock stereo systems the 3 pulley set is recommended because the Turner alternator pulley will help make more power and is also much lighter than the stock pulley.

    Additional Info
    Clickhere for example dyno graph

    Click here for installation instructions.


    This underdrive pulley kit fits the following BMW:
    2001-2002 Z3 BMW Z3 2.5i
    Turner Motorsport Power Pulley Upgrade Kit - Z4 M Roadster & Coupe
    Turner Motorsport
    Part Number: PPK-MZ4

    Underdrive Power Pulleys work to 'free up' horsepower. Any accessory that spins from the main drive belt is using up power. That's power that could otherwise be used to move the car. By giving some of that power back to the engine, you can make the car faster! It's like FREE HORSEPOWER !

    Underdrive pulleys for your BMW will slow down engine-mounted accessories - the water pump, power steering pump, and alternator*. These systems contribute to 'parasitic losses' - power lost from what the engine could produce if it did not have these systems. Since less energy is used to move them, that power is transferred back to the engine and used to propel the car. Our pulleys give a 10-20% reduction in rotation, releasing up to 11hp on most BMW six-cylinder engines. There's also a small but noticeable improvement in throttle response too! We have done extensive testing and development work, both on and off the track, to ensure that the accessory systems function as they should. On our Racing pulley kits we actually underdrive certain components more so we feel our Street pulleys are an ideal compromise between power/torque gains, reliability, and system performance. Our pulley kits have been on the market for over ten years, and used in all of our own cars, with zero component failures related to their use.

    Our pulleys are made from T-6061 aluminum and finished in a durable black hard anodize that is very resistant to wear, chemical exposure, and heat. We designed our pulleys to look similar to the factory parts but also to be stronger and, in most cases, slightly lighter too. For example, With our hardcoat aluminum you will never have to worry about a serious failure of a stock plastic pulley. A 'stealth' approach to aesthetics was our goal and we let the results speak for the pulley design. Installation is straight forward and easy with simple hand tools. Removal of the fan is required for access to the front of the engine. Total install time for a 3-piece pulley set should be around 1.5 hours. A new longer belt is included and we also recommend replacing the separate A/C belt, belt tensioners, and the guide and deflection pulleys at the same time.



    Additional Info
    Clickhere for example dyno graph

    Click here for installation instructions.

    Turner Pulley Kit contents:
  • Turner water pump pulley
  • Turner power steering pump pulley
  • new extended length belt
  • instructions

    This underdrive pulley kit fits the following BMW:
    2006-2008 MZ4 Z4 M Coupe / Z4 M Roadster
  • Turner Carbon Fiber CSL Roof Panel
    Turner Motorsport
    Part Number: 012315TMS

    This carbon fiber E46 roof panel is a direct replacement for the steel roof, saving nearly 50 pounds of weight from a critically high point in the vehicle - reducing body roll and improving overall performance, while giving you a smooth and clean surface when deleting your sunroof. It was inspired by the carbon roof used on the E46 M3 CSL and carried over to other M models and imitated in the aftermarket. Don't bother with carbon fiber vinyl and step up to the real thing! This carbon roof is now available after several years of painstaking development and test fits. We're excited to offer this high quality carbon roof at a competitive price!

    This carbon roof is made in the USA and designed to fit just like the factory CSL piece. When properly installed, it fits and looks just like it came from the factory. Minimal prep is required to install it, however, professional installation is encouraged. Fits coupe models only.

    Qty
    Starting At $1399.95
    Ships on Dec 28, 2017
    Add to Wish List
    Rear Adjustable Camber Arms (Pair) - E36, E46, E85 - Turner Motorsport Street/Track
    Turner Motorsport
    Part Number: TSU9940X

    Top seller! The Turner Adjustable Rear Camber Arms: The Only Adjustable Arms Approved for Grand-Am Continental Tire Challenge Racing Series

    Why you should use Turner Motorsport camber arms on your car:

    • If you have a lowered car and have run out of adjustment with the stock camber arms.
    • If you have a track car and are looking for increased camber adjustment, light weight pieces, stronger components, and improved suspension handling
    • Two bushing styles to meet your needs: solid rod-end for track-only use, or rubber bushing for mixed street/track use (approved by Grand-Am!)
    • The high range of adjustment allows a full racecar setup or a heavily lowered car to maintain factory specifications.
    • Only high quality and high strength materials and components are used
    • Aluminum camber arms are designed as a lightweight component, thereby reducing wear and tear on other, more critical parts (rear subframe, control arm bushings, etc). Each camber arm weighs only 2.5 lbs making for a total of 5 lbs for both parts! Stock camber arms weigh 3 lbs each. We have seen competitor's arms that weigh twice as much!
    • Hardcoat anodized aluminum, stainless steel turnbuckles, and stainless rod ends to all but eliminate corrosion from getting into the threads and making adjustment difficult.
    • CNC-machined double shear design for ease of installation, high strength, and choice of outside bushing material. But we do suggest using with (outer bushing # 33326775551) for best performance.
    • Easy adjustment - our main adjustment point is on the outside by the wheel so there is no need to work around the exhaust or subframe to adjust camber.
    • All hardware included.

     


    Installation Instructions:
    Instructions for Rod-End Style (TSU9940001)
    Instructions for Bushing-End Style (TSU9940B77)

    This item fits the following BMWs:
    1992-1999 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2001-2006 SpecE46 BMW 330i 330ci
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

     

    You are currently viewing items 1 - 50 of 77 | Next
    Get notified about money saving
    specials & deals for your BMW
    enter your email address
  • 22 years of BMW Tuning.
  • Award winning service.
  • 10,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook




    • 1-800-280-6966
      Mon-Thur 9am-6pm ET, Fri 9am-5pm ET

      • © TurnerMotorsport.com 1993-2017. All Rights Reserved.