Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

BMW Carbon Fiber Trunk Lids

Not only do these trunk lids provide a cosmetic enhancement in appearance, but they offer a considerable weight savings over the heavy steel factory BMW trunk lid. If you're after either weight savings for your BMW, a visual improvement, or BOTH, a carbon fiber trunk lid is a good option to consider.
For accurate results, specify your model below.
Seibon CSL style carbon fiber trunk - E90 3 series

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2007-2009 BMW E90 All non M submodels

Seibon
Part #: TL0507BMWE90-C
Price: $765.00 (USD) 
Direct Ship
Quantity:   
E92 Carbon Fiber Trunk Lid - Fits 2007+ E92 Coupes This CSL inspired trunk lid, made by Carbon Fiber specialist Carbon8, fits all 2007+ E92 3 series coupes and saves precious weight over the heavy steel stock BMW trunk lid. It also looks great, especially if you are into the naked carbon fiber look. This particular trunk lid's styling has a slightly swept up rear edge, reminiscent of the E46 M3 CSL -- which also had a carbon fiber trunk lid with an integral "spoiler" edge built into it.

We were pleasantly surprised by the fit and finish of this trunk lid, particularly at this price. The trunk lid fits as good as any other carbon fiber lid we've come accross. Some modifications and provisions need to be made to fit all trunk auxiliary components, such as lighting, trunk latch, hood shocks, emblems and interior trunk trim -- which is why we highly recommend professional installation on these (even if you're not having it painted). As with any carbon fiber or fiberglass body panel, extra time and preparation will be required to ensure the best fitment and installation. While no aftermarket body panels fit as perfectly as original OEM BMW panels, we were very satisfied with the overall quality and fit of these trunk lids. If you are mounting it unpainted to keep the carbon fiber visble, this trunk lid already comes with a clear gelcoat finish so that it is already exactly how you'd want it.

Professional installation highly recommended.

This carbon fiber trunk lid fits the following BMWs:
2007+ E92 3 Series Coupe - 328i, 335i & 335xi coupe
2008+ E92 M3 Coupe (2 door M3 only, no convertibles)
ECS
Part #: TMS1397
Price: $606.95 (USD) 
Ships on Jul 27, 2018
Quantity:   
1x1 Weave Sport Carbon Outer Carbon Trunk - F82 M4

Drop some weight over your rear axles with a carbon fiber trunk. Each RKP full carbon trunk is hand laid, featuring a beautiful OE quality fit and finish.

RKP offers the highest quality carbon fiber parts for your BMW that add functionality and style to your BMW. RKP is closely involved with BMW's M Division, boasting a line of track-proven hand laid carbon fiber components of the quality your BMW deserves.

RKP
Part #: RKP-F82-CFT-S-1
Price: $2395.00 (USD) 
Direct Ship
Quantity:   
Seibon OE Stlye Carbon Fiber Trunk - F10 5 series

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2010 - 2016 F10 5 Series Sedan 520i 523i 528i 528iX 530i 535i 535iX 550i 550iX Hybrid 5 M5 

Seibon
Part #: TL1012BMWF10
Price: $799.00 (USD) 
Direct Ship
Quantity:   
OEM CSL Style Carbon Trunk Lid SEIBON Carbon Fiber Trunks and Hatches are designed to replace your factory trunk or hatch and accept all hinges, handles, glass and locks for 100% Bolt On fitment. Cut weight in style with SEIBON Carbon Fiber Trunks and Hatches. OEM Style guarantees your SEIBON Carbon Fiber Trunk will look just like factory. No additional fins, ducting or alterations from stock aesthetics. All SEIBON Carbon Fiber Products are: * Hand Laid * ‘Wet’ Carbon Fiber * Clear 'Gel' Coated from the Factory * Inspected Before Shipping
Seibon
Part #: TL9703BMWE39
Price: $799.02 (USD) 
Ships on Jul 30, 2018
Quantity:   
BMW F82 M4 Carbon trunk (Race Full carbon) 1x1 weave RKP offers the highest quality carbon fiber parts for your BMW that add functionality and style to your BMW. RKP is closely involved with BMW's M Division, boasting a line of track-proven hand laid carbon fiber components of the quality your BMW deserves.
RKP
Part #: RKP-F82-CFT-R-1
Price: $2695.00 (USD) 
Direct Ship
Quantity:   
Seibon CSL style carbon fiber trunk - E92 3 series

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2007-2013 BMW E92 325i 325xi 328i 328xi 335i 335xi excluding convertible models

Seibon
Part #: TL0708BMWE922D-C
Price: $765.00 (USD) 
Direct Ship
Quantity:   
2x2 Weave Race Full Carbon Trunk - F82 M4

Drop some weight over your rear axles with a carbon fiber trunk. Each RKP full carbon trunk is hand laid, featuring a beautiful OE quality fit and finish.

RKP offers the highest quality carbon fiber parts for your BMW that add functionality and style to your BMW. RKP is closely involved with BMW's M Division, boasting a line of track-proven hand laid carbon fiber components of the quality your BMW deserves.

RKP
Part #: RKP-F82-CFT-R-2
Price: $2695.00 (USD) 
Direct Ship
Quantity:   
2x2 Weave Sport Carbon Fiber Trunk - F82 M4

Drop some weight over your rear axles with a carbon fiber trunk. Each RKP full carbon trunk is hand laid, featuring a beautiful OE quality fit and finish.

RKP offers the highest quality carbon fiber parts for your BMW that add functionality and style to your BMW. RKP is closely involved with BMW's M Division, boasting a line of track-proven hand laid carbon fiber components of the quality your BMW deserves.

RKP
Part #: RKP-F82-CFT-S-2
Price: $2395.00 (USD) 
Direct Ship
Quantity:   
Seibon OE style carbon fiber trunk - E60 5 series

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2003 - 2006 E60 Sedan 525i 525xi 530i 530xi 545i 550i 
2007 - 2010 E60 528i 528xi 535i 535ix 550i
2005 - 2010 E60 M5

Seibon
Part #: TL0407BMWE60
Price: $748.00 (USD) 
Direct Ship
Quantity:   
Vorsteiner Carbon Fiber Boot / Trunk Lid - F10 Show off the racing heritage of your F10 5 series with this Vorsteiner VRS Aero carbon fiber trunk lid! This carbon fiber boot lid is a direct replacement for the factory trunk lid with a look straight out of the motorsport catalog.

Vorsteiner is a company that was conceived through the imagination of creating the highest quality parts for the most discerning vehicles and clientele. Their relentless pursuit of advancement and perfection is seen not only in their unmatched automotive parts, but also in the hands of carbon fiber craftsmen to create purely sensational parts for the most deserving and elite vehicles.

Every Vorsteiner product is rigorously tested and must pass our highly detailed quality control before leaving the on-site Vorsteiner factory. Only after rigorous testing can a part be deemed worthy of the Vorsteiner name. Our clientele expect nothing less than perfection from Vorsteiner, and we welcome and exceed these expectations.

Vorsteiner's Autoclaved Pre-Preg Carbon Fiber structure gives our parts superior stiffness, aerospace strength & durability compared to traditional hand laid carbon fiber composites.

This item fits the following BMWs:
2011+ F10 BMW 528i 528i xDrive 535i 535i xDrive 535d 535d xDrive 550i 550i xDrive M5
Vorsteiner
Part #: TMS216192
Price: $3495.00 (USD) 
Direct Ship
Quantity:   
Seibon CSL style carbon fiber trunk - F30 3 series

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2012+ F30 3 Series Sedan 320i 320i ed 320iX 328i 328iX 328i 328iX 335i 335iX 340i 340ix Hybrid 3

Seibon
Part #: TL1213BMWF30C
Price: $765.00 (USD) 
Direct Ship
Quantity:   
Seibon CSL stlye carbon fiber trunk - E46 3 series sedan

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
1999-2006 BMW E46 320i 323i 325i 328i 330i 

Seibon
Part #: TL9904BMWE464D-C
Price: $765.00 (USD) 
Direct Ship
Quantity:   
Seibon CSL style rear spoiler

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2006 - 2008 E90 323i 325i 325xi 328i 328xi 330i 330xi 335i 335xi
2009-2012 E90 323i 323i 328i 328xi 335d 335i 335i xDrive 335xi

Seibon
Part #: RS0507BMWE90C
Price: $540.00 (USD) 
Ships on Jul 30, 2018
Quantity:   
Carbon fiber front strut bar - F30, F32 3 series

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2012-2017 BMW F30 All 
2014-2017 BMW F32 All

Seibon
Part #: SB1213BMWF30
Price: $442.00 (USD) 
Direct Ship
Quantity:   
Carbon Fiber CSL Style Trunk - E46 3 Series coupe

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2002-2006 BMW E46 325ci 330ci
 

Seibon
Part #: TL9904BMWE462D-C
Price: $765.00 (USD) 
Direct Ship
Quantity:   
Seibon OE style carbon fiber trunk - F30 3 series

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2012+ F30 3 Series Sedan 320i 320i ed 320iX 328i 328iX 328i 328iX 335i 335iX 340i 340ix Hybrid 3

Seibon
Part #: TL1213BMWF30
Price: $731.00 (USD) 
Direct Ship
Quantity:   
Seibon carbon fiber side skirt set - F10 5 series

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2010 - 2016 F10 5 Series Sedan 520i 523i 528i 528iX 530i 535i 535iX 550i 550iX Hybrid 5 M5 

Seibon
Part #: SS1012BMWF10
Price: $697.00 (USD) 
Direct Ship
Quantity:   
CSL Style Complete Carbon Fiber Trunk Lid - up to 09/2008

Looking to update your rear trunk lid to the lighter weight and improved style of carbon fiber? This CSL style complete carbon fiber trunk lid is exactly what you're looking for. This gives your vehicle the sporty CSL performance look and is built to accept all factory hardware and lights with great fitment quality!

This lid can be painted for additional style options or to cover slight imperfections that are expected from hand-laid carbon fiber parts.


Fitment:
Up to 09/2008 E90 BMW M3 and Non-M 3 series

ECS
Part #: 008007ecs15A
Price: $612.95 (USD) 
In Stock
Quantity:   
Seibon CSL style carbon fiber trunk - E60 5 series

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2003 - 2006 E60 Sedan 525i 525xi 530i 530xi 545i 550i 
2007 - 2010 E60 528i 528xi 535i 535ix 550i
2005 - 2010 E60 M5

Seibon
Part #: TL0407BMWE60C
Price: $799.00 (USD) 
Direct Ship
Quantity:   
Seibon CSL style carbon fiber trunk - E39 5 Series

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
1996 - 2004 E39 Sedan 525i 528i 530i 540i 
1998 - 2004 E39 Touring 525i 528i 540i 
1998 - 2004 E39 M5

Seibon
Part #: TL9703BMWE39C
Price: $799.00 (USD) 
Direct Ship
Quantity:   
Seibon CSL style carbon fiber trunk - E90 3 series

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2009-2013 BMW E90 All non M submodels

Seibon
Part #: TL0910BMWE90-C
Price: $765.00 (USD) 
Direct Ship
Quantity:   
OEM Style Carbon Fiber Hood SEIBON Carbon Fiber Hoods are designed to replace your factory hood and accept all hinges, latches and windshield sprayers for 100% Bolt On fitment. Cut weight in style with SEIBON Carbon Fiber Hoods. All SEIBON Carbon Fiber Hood should be installed with Hood Pins. Although SEIBON Hoods do bolt-on, it is recommended that vehicles that will be used on street or racing circuits use Hood Pins for additional safety. All SEIBON Carbon Fiber Products are: * Hand Laid * ‘Wet’ Carbon Fiber * Clear 'Gel' Coated from the Factory * Inspected Before Shipping
Seibon
Part #: HD9703BMWE39
Price: $782.00 (USD) 
Ships on Jul 30, 2018
Quantity:   
Seibon CSL style carbon fiber trunk - F30 3 series

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2012+ F30 3 Series Sedan 320i 320i ed 320iX 328i 328iX 328i 328iX 335i 335iX 340i 340ix Hybrid 3

Seibon
Part #: TL1213BMWF30CS
Price: $765.00 (USD) 
Direct Ship
Quantity:   
Seibon CSL style carbon fiber spoiler - E46 3 series sedan

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
1999-2006 BMW E46 All except coupe models

Seibon
Part #: RS9904BMWE464D-C
Price: $520.00 (USD) 
Ships on Jul 30, 2018
Quantity: