Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

BMW Intake Boots & Hoses

BMW Intake Boots & Hoses The intake boot provides a pathway for air from the air flow sensor to the intake manifold. On most BMWs the boot is made of rubber with an accordian shape that allows the engine to shift and vibrate. As with any rubber component the rubber can dry out and crack and that can lead to serious running and drivability issues. A crack in the boot means that air is entering the engine that is not being monitored by the airflow sensor. The engine computer relies on data from the airflow sensor to set the fuel mixture in the engine. Excess unmetered air can result in lean condition faults, rough running, misfires, and other performance issues. For misfire and lean condition faults, check your intake boots first.

As an alternative to the original rubber, we also offer silicone boots that are both stronger and last longer with a 4-layer silicone design. Samco silicone boots can also decrease your BMW's intake turbulence and restriction by replacing the accordian design with a smoothed internal surface. Samco boots are also perfect as part of a kit to eliminate the factory traction control system (sometimes called an ASC delete boot).
For accurate results, specify your model below.
Intake Boot (stock HFM) - E36 323/328/M3 96-99 This intake boot connects the mass air sensor to the intake manifold. If it becomes cracked or loose it can cause unmetered air to enter the engine and trigger a check engine light. It fits BMW E36 323is 328i 328is M3 1996-1999 with either the M52 or S52 engine.

This item fits the following BMWs:
1996-1998 E36 BMW 323is 323ic 328i 328is 328ic M3
1997-1998 Z3 BMW Z3 2.8
1997-2000 Z3 BMW M Roadster M Roadster
URO
Part #: 13541740073
Price: $24.95 (USD) 
Back Ordered, Contact Us
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Intake Boot - E28 E24 E23 Replace your cracked or damaged intake air boot to maintain proper performance and engine longevity. This Genuine BMW intake hose directs air into the factory air box assembly from outside.

This item fits the following BMWs:
2/1983-1988 E28 BMW 524td 528e 533i 535i 535is M5
2/1983-1989 E24 BMW 633csi 635csi M6
2/1983-1987 E23 BMW 733i 735i
Genuine BMW
Part #: 13711287327
Price: $42.23 (USD) 
$48.36 (13% off MSRP)
Ships in 3 days
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Rein
Part #: 13711708800
Price: $21.40 (USD) 
Ships in 9 days
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
E46 323/325/328 Mishimoto Intake Boot Set

A silicone intake boot offers many advantages over the stock accordion-style boot:

  • perfectly smooth interior surface (less turbulent air)
  • stronger and more durable (no rips to create vaccum leaks)
  • will not attract or radiate heat to the engine bay

Cracked intake boots can lead to a whole host of problems. The original rubber boots fray and crack due to heat from the engine drying out the rubber. You won't have those problems with silicone boots. These are a direct replacement for the stock upper and lower boots with a CNC machined aluminum adapter joining them together (just like the factory setup). Easy installation and with a lifetime warranty, these will probably be the last intake boots you ever install!

These boots are the stock 3.0" size for the 323i M52TU, 325i M54, and 328i M52TU engines. The 325i M56 SULEV engine and the 330i M54 use a larger 3.5" boot.

Mishimoto
Part #: MMBOOTE4625
Price: $105.00 (USD) 
Ships on Jun 5, 2018
Free Shipping Free Shipping
Intake Boot - E36 325i/M3 92-95 (Without ASC) This intake boot connects the mass air sensor to the intake manifold. If it becomes cracked or loose it can cause unmetered air to enter the engine and trigger a check engine light. It fits BMW E36 325i 325is 325ic M3 1992-1995 with either the M50 or S50 engine. It will not work on cars with traction control (ASC)

This item fits the following BMWs:
1992-1995 E36 BMW 325i 325is 325ic M3
Febi
Part #: 13541738757
Price: $15.08 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Samco Silicone Intake Boot - E36 M3 (for upgraded 3.5 inch HFM) (for deleting ASC) If you've upgraded to the 3.5" Euro, 540i or Porsche HFM you know how much of a difference reducing intake restriction makes on these engines. This Samco silicone intake boot is the perfect mate for cars that have been upgraded with the 3.5" HFM, as it doesn't require any reducers or adapters (which impair air flow). Unlike the factory rubber intake boot, which has an accordian-like shape that causes turbulence, this boot has a smooth interior surface for best possible air flow. When coupled with the 3.5" HFM this makes for the best possible flow to the throttle body and intake manifold.

This intake boot assumes your car either is not equipped with traction control system (ASC) or it has been (or will be) deleted. We offer an intake boot plug if you are deleting ASC.

This Samco silicone intake boot fits the following BMWs:
1995-1999 E36 M3 with 3.5" HFM & ASC delete
1998-2000 MZ3 M Roadster/Coupe with 3.5" HFM & ASC delete
Samco
Part #: TMS1912
Price: $139.95 (USD) 
Ships in 8 days
Free Shipping Free Shipping
Genuine BMW Gasket Ring - 13712247398 - E82,E89,E90,E92,E93

Seals the intake pipe.


Genuine BMW Gasket Ring
This item fits the following BMW Chassis:
E82 1M Coupe,E82,E89 Z4,E90,E92,E93

Fits BMW Engines including:
N54,N54T
 

 

Genuine BMW
Part #: 13712247398
Price: $16.93 (USD) 
$19.53 (13% off MSRP)
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Intake Boot - E30 325e 84-87 This intake boot fits BMW E30 325e 325es 1984-1987 with the M20 engine.Over time, this boot my become dry and cracked. If this boot is cracked it will allow unmetered, and unfiltered air to enter the engine and cause a number of drivability problems.

This item fits the following BMWs:
1984-1987 E30 BMW 325e 325es
MTC
Part #: 13711285479
Price: $5.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Rein
Part #: 13541438759
Price: $11.89 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Intake Boot - E36 318i 96-98, Z3 1.9  (M44 Engine) This Genuine BMW intake boot is for 4 cylinder M44 engines in the E36 and Z3 chassis.

Not for cars with ASC+T Traction Control

This item fits the following BMWs:
1996-1998 E36 BMW 318i 318is 318ti 318ic
1997-1998 Z3 BMW Z3 1.9
Genuine BMW
Part #: 13711247031
Price: $40.21 (USD) 
$44.75 (10% off MSRP)
Ships in 3 days
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Intake Boot - E60 M5,E63 M6

Genuine BMW Rubber Boot
This item fits the following BMW Chassis:
E60 M5,E63 M6,E63

Fits BMW Engines including:
S85

Genuine BMW
Part #: 11617834213
Price: $18.57 (USD) 
$21.27 (13% off MSRP)
Ships in 3 days
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Intake Boot - E28 535i, E24 635csi, E23 735i This intake boot goes from the air flow meter to the throttle body on E28 5 series, E24 6 series and E23 7 series with the M30 6 cylinder engine.

This item fits the following BMWs:
1984-1988 E28 BMW 535i 535is
1982-6/1987 E24 BMW 635csi
1985-1987 E23 BMW 735i
MTC
Part #: 13541707080
Price: $16.95 (USD) 
Ships on Jun 5, 2018
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Samco Silicone Intake Boot (stock HFM) - E36 323/325/328/M3 If you are about to (or already have) eliminated the restrictive stock BMW ASC+T traction control system, you'll want to upgrade to this Samco silicone intake boot. Lose the factory "accordian" desgin boot, which creates lots of intake turbulence (read: lost power!). The Samco intake elbow has a perfectly smooth interior finish, with no sharp angles or other obstacles for intake air to get slowed by. It's made using 4 layers of high quality silicone, designed to last for many years in even the most extreme conditions.

Installing this boot assumes your car either does not have traction control (ASC), or you will be removing it from your car. (You'll also need to install a 10ohm / 1watt resistor accross the ASC actuator wiring, to simulate the presence of the ASC modules, and avoid causing ABS faults). Removing ASC is a great way to decrease intake restriction, and this intake boot is perfect for this upgrade. We offer an intake boot plug if you are deleting ACS.

This intake boot works very well with all cold air intake kits, including the Conforti cold air kit (with standard 3.0" HFM) and AFE intake kits. Have you already upgraded to the 3.5" Euro/540i HFM? No problem! We have a Samco intake bellows for that application as well (see part# SAMCO-BFHOSE1-BLK).

This Samco silicone intake boot fits the following BMWs:
1992-1995 E36 3 Series 325i, 325is & 325ic
1996-1999 E36 3 Series 328i, 328is & 328ic (with ASC delete)
1995-1999 E36 M3 3.0 & 3.2 (with ASC delete)
1997-1999 Z3 Roadster/Coupe 2.3 & 2.8 liter
1998-2000 MZ3 M Roadster/Coupe (S52 engine)
Samco
Part #: TMS1916
Price: $89.95 (USD) 
Ships in 8 days
Free Shipping Free Shipping
on orders $99 and up
Hudson
Part #: 13717555784
Price: $58.51 (USD) 
Ships in 3 days
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Intake Boot - Lower - E46 330i, E46 325i M56 This intake boot connects to the throttle housing to the upper intake boot. If it becomes cracked or loose it can cause unmetered air to enter the engine and trigger a check engine light. This fits BMW E46 330i Z3 3.0i and E46 325i with M56 engine.

This item fits the following BMWs:
2003-2005 E46 BMW 325i 325ci with M56 SULEV engine
1999-2005 E46 BMW 330i 330ci 330xi
1997-2002 Z3 BMW Z3 3.0i
Genuine BMW
Part #: 13541438759
Price: $15.09 (USD) 
$17.10 (12% off MSRP)
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
E36 Mishimoto Silicone Intake Boot (Stock 3.0

A silicone intake boot offers many advantages over the stock accordion-style boot:

  • perfectly smooth interior surface (less turbulent air)
  • stronger and more durable (no rips to create vaccum leaks)
  • will not attract or radiate heat to the engine bay

This intake boot is the stock 3.0" size to replace the stock intake boot and delete ASC+T on E36 and Z3 models. Normally deleting ASC will require a new boot from a non-ASC model but this boot is stronger with a small power gain as a bonus. The Mishimoto E36 boot has a perfectly smooth interior finish with no sharp angles or other obstacles for the intake air to be slowed by. Installing this boot assumes your car either does not have traction control (ASC), or you will be removing it from your car. Removing ASC is a great way to decrease intake restriction, and this intake boot is perfect for this upgrade.

This boot has two ports to work on early and late E36 models. Early cars have vaccum and the crankcase vent hoses entering the intake boot. Later models only have the vaccum hose (the crankcase vent empties into the oil dipstick. We offer an intake boot plug for the later models to plug one of these holes. You can add one from the options below.

Choose from black, blue, or red silicone.

This Mishimoto silicone intake boot fits the following BMWs: 
1992-1995 E36 3 Series 325i, 325is & 325ic 
1996-1999 E36 3 Series 328i, 328is & 328ic (with ASC delete) 
1995-1999 E36 M3 3.0 & 3.2 (with ASC delete) 
1997-1999 Z3 Roadster/Coupe 2.3 & 2.8 liter 
1998-2000 MZ3 M Roadster/Coupe (S52 engine) 

Mishimoto
Part #: OSEE3692IB
Price: $72.00 (USD) 
Ships on May 29, 2018
Free Shipping Free Shipping
on orders $99 and up
Intake Boot - E34 535i, E32 735i 735il, E24 635csi BMW rubber intake boot for cars mechanical throttle body. The boot connects the air flow sensor to the throttle body housing. NOT for cars with EML.

This item fits the following BMWs:
1989-1993 E34 BMW 535i
6/1987-1989 E24 BMW 635csi
1988-1993 E32 BMW 735i 735il l
MTC
Part #: 13541722847
Price: $19.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Intake Boot - E85 Z4 2.5i Replace your cracked or leaking Z4 intake boot with this genuine BMW part. This is the rubber intake boot that that goes from the throttle body assembly to the mass airflow sensor boot.

This item fits the following BMWs:
2003-2005 E85 BMW Z4 2.5i
Genuine BMW
Part #: 13547514880
Price: $35.02 (USD) 
$40.48 (13% off MSRP)
Ships in 3 days
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
E36 Mishimoto Silicone Intake Boot (Euro/540/Porsche 3.5

A silicone intake boot offers many advantages over the stock accordion-style boot:

  • perfectly smooth interior surface (less turbulent air)
  • stronger and more durable (no rips to create vaccum leaks)
  • will not attract or radiate heat to the engine bay

This intake boot is the larger 3.5" size to replace the adapter and stock intake boot and delete ASC+T on E36 M3 and MZ3 models. Normally deleting ASC will require a new boot from a non-ASC model but this boot is stronger with a small power gain as a bonus. And you don't need the HFM adapter used with most HFM kits. The Mishimoto E36 boot has a perfectly smooth interior finish with no sharp angles or other obstacles for the intake air to be slowed by. Installing this boot assumes your car either does not have traction control (ASC), or you will be removing it from your car. Removing ASC is a great way to decrease intake restriction, and this intake boot is perfect for this upgrade.

This boot has two ports to work on early and late E36 models. Early cars have vaccum and the crankcase vent hoses entering the intake boot. Later models only have the vaccum hose (the crankcase vent empties into the oil dipstick. We offer an intake boot plug for the later models to plug one of these holes. You can add one from the options below.

Choose from black, blue, or red silicone.

This Mishimoto silicone intake boot fits the following BMWs: 
1995-1999 E36 M3 3.0 & 3.2 (with ASC delete) 
1998-2000 MZ3 M Roadster/Coupe (S52 engine) 

Mishimoto
Part #: OSEE3692IB35
Price: $108.00 (USD) 
Ships on Jun 5, 2018
Free Shipping Free Shipping
Genuine BMW Turbo-Intercooler Clamp - 11657558922

T-Bolt clamp used for the intercooler piping. This ensure that there will be no leaks from the intake hoses or pipes, holding everything tightly together.


Genuine BMW Clamp
This item fits the following BMW Chassis:
E82 1M Coupe,E71 X6,E82,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16

Fits BMW Engines including:
N54,N54T,N63,N63N

 

Genuine BMW
Part #: 11657558922
Price: $10.66 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Genuine Mini Rubber Boot - 13717555784 Genuine MINI RUBBER BOOT.--

This item fits the following BMWs:
MINI Cooper - Mini Cooper S, Mini Cooper S Clubman, Mini Cooper S Convt

--. Fits BMW Engines including:
N14

Genuine MINI
Part #: 13717555784
Price: $135.95 (USD) 
$182.31 (25% off MSRP)
In Stock
Free Shipping Free Shipping
Quantity:   
aFe Silicone Intake Tube Upgrade - E46 M3 aFe offers this silicone intake tube to replace the accordian-style stock boot. The silicone tube is completely smooth inside, unlike the stock boot that causes turbulent air. aFe measured a 128% increase in flow and 10hp gain with this tube alone. This tube can be used with the stock intake air box or with the aFe Stage 1 cold air intake. This is a very simple bolt-on product using hose clamps and requires no cutting or drilling. Available in a stealthy black or bright blue.

This item fits the following BMWs:
2001-2006  E46 BMW  M3, M3 convertible
AFE
Part #: 54-10469
Price: $99.00 (USD) 
In Stock
Free Shipping Free Shipping
Intake Rubber Boot - From Mass Air Sensor to throttle - E36 318i 96-98, Z3 1.9 This is the rubber intake boot that goes from the mass air sensor to the throttle assembly on 318i and Z3 with M44 engines.
Only for cars with Automatic Stability Control (ASC+T)

This item fits the following BMWs:
1996-1998 E36 BMW 318i 318is 318ti 318ic
1996-1997 Z3 BMW Z3 1.9
Genuine BMW
Part #: 13711433979
Price: $30.27 (USD) 
$34.83 (13% off MSRP)
Ships in 3 days
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Intake Rubber Boot - From Throttle Body To Manifold - E36 318i 96-98, Z3 1.9 This is the rubber intake boot that goes from the throttle body assembly to the intake manifold on 318i and Z3 with M44 engines. Only for cars with Automatic Stability Control (ASC+T)

This item fits the following BMWs:
1996-1998 E36 BMW E36 BMW 318i 318is 318ti 318ic
1996-1998 Z3 BMW Z3 1.9
Genuine BMW
Part #: 13711433978
Price: $38.37 (USD) 
$44.15 (13% off MSRP)
Ships in 3 days
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Intake Boot - Upper - E46 330i, E46 325i M56, Z3 3.0i This intake boot connects to the mass air sensor. If it becomes cracked or loose it can cause unmetered air to enter the engine and trigger a check engine light. This fits BMW E46 330i Z3 3.0i and E46 325i with M56 engine.

This item fits the following BMWs:
1999-2005 E46 BMW 330i 330ci 330xi
2003-2005 E46 BMW 325i 325ci with M56 engine
2000-2002 Z3 BMW Z3 3.0i
Genuine BMW
Part #: 13541438761
Price: $31.14 (USD) 
$34.78 (10% off MSRP)
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Intake Boot - E30 318is (M42 Engine) This is the rubber intake elbow that connect the air flow meter to the throttle housing on the E30 318i/is with the M42 engine.

This item fits the following BMWs:
1990-1991 E30 BMW 318i 318is 318ic
Genuine BMW
Part #: 13711734385
Price: $47.64 (USD) 
$54.82 (13% off MSRP)
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Turner Motorsport N52 Silicone Intake Boot - Black - E8x 128i, E9x 325, 328, 330

The intake boot is a regular issue especially for BMW's, nearly all vehicles have a boot manufactured from rubber with an accordion section in the design for flexibility. This flexible section is typically where the failure comes from, leading to vacuum leak engine codes, rough idle, and increase fuel consumption. 

When you upgrade to a Turner silicone intake boot you get a perfect fit that will not only outlast the OE design (meaning any vacuum leaks and rough idle), while also smoothing out airflow within the intake tract. This boot also eliminates the factory intake resonator giving your engine a much more aggressive sound under the hood especially at higher rpm. Available in black or Turner blue color, our intake boot offers either a pop of color or a cohesive, complementary look in your engine bay.

The Turner Motorsport silicone intake boot is manufactured with 5 layers of wire reinforced silicone to prevent collapse under load. Engineered in-house utilizing 3D scanning technology, this boot offers perfect fitment with the factory air box and either single stage or three stage (high output N52) intake manifolds.

Install as a standalone reliability improvement or in addition to our three stage intake manifold and Turner performance tune (available here).

Replaces OE intake boot - 13717536004

Features:

  • 5 layers of wire reinforced silicone
  • Perfect fitment with factory airbox
  • Compatible with single stage or three stage manifold
  • Installation hardware included

This item fits the following BMWs:
2008-2013 E82 E88 BMW 128i Coupe Convertible
2006-2011 E90 BMW 325i 325xi 328i 328xi 330i 330xi - Sedan
2007-2011 E91 BMW 325i 325xi 328i 328xi - Touring Wagon
2007-2013 E92 BMW 328i 328xi - Coupe
2007-2013 E93 BMW 328i - Convertible

Turner Motorsport
Part #: 006655TMS01
Price: $59.95 (USD) 
Ships on Aug 17, 2018
Free Shipping Free Shipping
Quantity:   
Intake Boot - E36 318i 95  (M42 Engine) This intake boot connects the mass air sensor to the intake manifold. If it becomes cracked or loose it can cause unmetered air to enter the engine and trigger a check engine light. It fits BMW E36 318i/is/ic/ti 1995 with the M42 engine. 1995 E36 BMW 318i 318is 318ti 318ic
Rein
Part #: 13711247829
Price: $27.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Samco Silicone Intake Boot - Red - E46 M3 If you've already replaced the factory airbox of your E46 M3 for a cold air intake kit, the stock rubber intake elbow (which connects the mass air sensor / HFM to the intake manifold) is now your enemy. The stock S54 part has accordian-like grooves on both the inlet and outlet side, which slows down air flow. It's no wonder you don't see this type of restrictive setup on the E46 M3 CSL! 

The Samco silicone intake boot for E46 M3 has a perfectly smooth interior surface, engineered for the best flow and smoothest transision -- no sharp edges or angles to hang up or slow down the air. Made in the UK using a 4 layer silicone design. Unlike the stock E46 M3 rubber boot, which is prone to drying, cracking and leaking, the Samco boot is virtually indestructable and ready for the rigors of heat temperature and extreme conditions. 

This Samco silicone intake boot fits the following BMWs:
2001-2006  E46 M3  coupe & convertible
Samco
Part #: TB2754-red
Price: $139.95 (USD) 
Ships in 8 days
Free Shipping Free Shipping
Quantity:   
Turner Motorsport N52 Silicone Intake Boot - Blue - E8x 128i, E9x 325, 328, 330

The intake boot is a regular issue especially for BMW's, nearly all vehicles have a boot manufactured from rubber with an accordion section in the design for flexibility. This flexible section is typically where the failure comes from leading to vacuum leak engine codes, rough idle, and increase fuel consumption. 

When you upgrade to a Turner silicone intake boot you get a perfect fit that will not only outlast the OE design (meaning any vacuum leaks and rough idle), while also smoothing out airflow within the intake tract. This boot also eliminates the factory intake resonator giving your engine a much more aggressive sound under the hood especially at higher rpm. Available in black or Turner blue color, our intake boot offers either a pop of color or a cohesive, complementary look in your engine bay.

The Turner Motorsport silicone intake boot is manufactured with 5 layers of wire reinforced silicone to prevent collapse under load. Engineered in-house utilizing 3D scanning technology, this boot offers perfect fitment with the factory air box and either single stage or three stage (high output N52) intake manifolds.

Install as a standalone reliability improvement or in addition to our three stage intake manifold and Turner performance tune (available here).

Replaces OE intake boot - 13717536004

Features:

  • 5 layers of wire reinforced silicone
  • Perfect fitment with factory airbox
  • Compatible with single stage or three stage manifold
  • Installation hardware included

This item fits the following BMWs:
2008-2013 E82 E88 BMW 128i Coupe Convertible
2006-2011 E90 BMW 325i 325xi 328i 328xi 330i 330xi - Sedan
2007-2011 E91 BMW 325i 325xi 328i 328xi - Touring Wagon
2007-2013 E92 BMW 328i 328xi - Coupe
2007-2013 E93 BMW 328i - Convertible

Turner Motorsport
Part #: 006655TMS02
Price: $59.95 (USD) 
Ships on Aug 17, 2018
Free Shipping Free Shipping
Quantity:   
Intake Boot - E30 325i 87-11/88 This is the rubber intake hose from the air flow meter to the throttle housing for E30 325i.

This item fits the following BMWs:
1987-11/1988 E30 BMW 325i 325ic 325is 325ix br>
Genuine BMW
Part #: 13711708800
Price: $50.81 (USD) 
$56.54 (10% off MSRP)
Ships in 3 days
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Intake Boot - for cars with EML - E34 535i, E32 735i,735il Genuine BMW rubber intake boot for cars with EML electronic throttle body. The boot connects the air flow sensor to the throttle body housing. ONLY for cars with EML!

This item fits the following BMWs:
1989-1993 E34 BMW 535i
1988-1993 E32 BMW 735i 735il
Genuine BMW
Part #: 13541719905
Price: $31.07 (USD) 
$35.75 (13% off MSRP)
Ships in 3 days
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
OEM Intake Boot - Upper - E46 323/328, E46 325i M54, Z3 2.5/2.8 This intake boot connects to the mass air sensor. It fits BMW E46 323i 325i (M54) 325xi 328i - Z3 2.8 2.5.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325xi 328i 328ci
2001-2005 E46 BMW 325i 325ci with M54 engine
1999-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8
Febi
Part #: 13541705209
Price: $18.69 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Rubber Intake Boot - E39 540i E38 740i 740il  Replace your cracked or damaged fuel injection intake boot with this Genuine BMW part. This boot goes from the mass air sensor to the secondary throttle housing.

This item fits the following BMWs:
1997-1998 E39 BMW 540i
1997-1998 E38 BMW 740i 740ill
Genuine BMW
Part #: 13711432410
Price: $90.77 (USD) 
$101.38 (10% off MSRP)
Ships in 3 days
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Blue Forge Silicone Intercooler Hose - N55

Forge's silicone intercooler hose features a Fluorosilicone inner liner, proven to last with the use of coolants, Organic Acid Technology coolants, or air containing oil blowby.

This Forge product comes with a limited Lifetime warranty.

This product fits the following BMWs:
2014+ F22 M235i M235iX
2014+ F23 M235i 

Forge
Part #: FMKT135F20-B
Price: $150.00 (USD) 
Direct Ship
Quantity:   
Intake Boot - E34 M5 This rubber intake boot fits BMW E34 M5 from 1991-1995. A cracked intake boot can cause problems with erratic idle, poor fuel economy and potentially damage the engine by letting debris directly into the engine. We recommend checking the intake boots at least once a year.

This item fits the following BMWs:
1991-1995 E34 BMW M5
Genuine BMW
Part #: 11611312062
Price: $58.84 (USD) 
$68.35 (14% off MSRP)
Ships in 3 days
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Genuine BMW Rubber Boot - 13711438471 - E53

Directs air from the snorkel to the air box.


Genuine BMW Rubber Boot -
This item fits the following BMW Chassis:
E53 X5

Fits BMW Engines including:
M54
 

 

Genuine BMW
Part #: 13711438471
Price: $58.48 (USD) 
$67.61 (14% off MSRP)
Ships in 3 days
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Intake Boot - E39 528i 1997-1998 Replace your cracked intake hose with this is the Genuine BMW intake boot. It goes from the HFM to the throttle body assembly.

This item fits the following BMWs:
1997-1998 E39 BMW 528i
Genuine BMW
Part #: 13541740931
Price: $16.07 (USD) 
$17.95 (10% off MSRP)
Ships in 3 days
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
E46 330 Mishimoto Intake Boot Set

A silicone intake boot offers many advantages over the stock accordion-style boot:

  • perfectly smooth interior surface (less turbulent air)
  • stronger and more durable (no rips to create vaccum leaks)
  • will not attract or radiate heat to the engine bay

Cracked intake boots can lead to a whole host of problems. The original rubber boots fray and crack due to heat from the engine drying out the rubber. You won't have those problems with silicone boots. These are a direct replacement for the stock upper and lower boots with a CNC machined aluminum adapter joining them together (just like the factory setup). Easy installation and with a lifetime warranty, these will probably be the last intake boots you ever install!

These boots are the stock 3.5" size for the 330i M54 and 325i M56 SULEV engines. These will not work on the standard 325i M54 engine (3.0" boot).

Mishimoto
Part #: MMBOOTE4630
Price: $105.00 (USD) 
Back Ordered, Contact Us
Free Shipping Free Shipping
Genuine BMW Euro CSL Intake Tube - E46 M3

This intake tube runs from the bumper to the intake snorkel.

Fits the following BMW's:
2003 E46 BMW M3 CSL

Genuine European BMW
Part #: 11617833648
Price: $69.95 (USD) 
Ships on Jul 25, 2018
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Intake Boot - Lower - E46 323/328, E46 325i M54, E39 528i, Z3 2.5/2.8 This intake boot connects to the throttle body assembly.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325xi 328i 328ci
2001-2005 E46 BMW 325i 325ci with M54 engine
1999-2000 E39 BMW 528i
1999-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8
Genuine BMW
Part #: 13541435627
Price: $15.72 (USD) 
$17.82 (12% off MSRP)
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
E36/Z3 6 Cylinder Intake Tube Plug (For ASC Delete or Blocking PCV or Idle Control Valve hoses) Made in the USA The TMS E36/Z3 6cyl Intake Tube Plug is intended to be used in a variety of applications ranging from ASC delete, deleting the idle control valve in a car with a aftermarket engine management system, re-routing the PCV hose to a catch can, aftermarket supercharged engines, or simply plugging one of the hose provisions in the E36 6cyl intake tubes. It also works great as a coolant hose plug. The diameter of the tip is 20mm (just over 3/4"). A low profile Oetker compression clamp is included. The plug can be drilled and tapped for a small air temp/water temp sensor, pre throttle body vacuum/boost/MAP sensor barb, or water alcohol/nitrous/methanol injector or barb. Works with M50, M50TU S52, M52, S52 throttle boots and may work in other applications with a 20mm hose.

Installation Instructions Installation Instructions / More Details

This intake tube plug can be used in a variety of ways on these BMWs:
1992-1995 E36 325i, 325is, 325ic
1996-1998 E36 328i, 328is, 328ic
1999-1999 E36 328is, 328ic
1995-1999 E36 M3 coupe, sedan & convertible
1997-1999 Z3 2.8 liter
1992-1995 M50 engine (2.5 liter)
1996-1999 M52 engine (2.8 liter)
1995-1995 S50 engine (3.0 liter / US engine)
1996-1999 S52 engine (3.2 liter / US engine)
Turner Motorsport
Part #: TEN3660ITP
Price: $18.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Intake Boot - E83 X3 2004-2006 (m54) This Genuine BMW intake boot /elbow connects the mass air sensor to the throttle body assembly on X3 3.0i with the M54 engine.

This item fits the following BMWs:
2004-2006 E83 BMW X3 3.0i
Genuine BMW
Part #: 13543412292
Price: $36.25 (USD) 
$40.48 (10% off MSRP)
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Rein
Part #: 13543412292
Price: $23.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Intake Boot - From Air Box To Throttle Housing - E83 X3 3.0si N52 This is the Genuine BMW rubber intake boot that goes from the intake air box assembly to the throttle housing for N52 equipped E83N X3 models.

This item fits the following BMWs:
2006-2010 E83 BMW X3 3.0i X3 3.0si
Genuine BMW
Part #: 13713422609
Price: $44.82 (USD) 
$53.92 (17% off MSRP)
Ships in 3 days
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Genuine BMW Pressure Hose Assy Tlev - 11721433821 - E36

Genuine BMW Pressure Hose Assy - Tlev
This item fits the following BMW Chassis:
E36

Fits BMW Engines including:
M44

Genuine BMW
Part #: 11721433821
Price: $22.83 (USD) 
$27.63 (17% off MSRP)
Ships in 3 days
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Genuine Euro CSL Intake Hose - E46 M3 CSL This attaches to the CSL intake system to help add additional cool air to the intake.
Genuine European BMW
Part #: 13717896774
Price: $43.85 (USD) 
$68.95
Limited Qty Sale
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Intake Boot - E30 M3 This intake book fits BMW E30 M3 from 1988-1991. This boot goes from the air flow meter to the air accumulator. A cracked intake boot can cause problems with erratic idle, poor fuel economy and potentially damage the engine by letting debris directly into the engine. We recommend checking the intake boots at least once a year.

This item fits the following BMWs:
1988-1991 E30 BMW M3
Genuine BMW
Part #: 11611310785
Price: $56.22 (USD) 
$68.06 (17% off MSRP)
Ships in 3 days
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Samco Silicone Intake Boot - Black - E46 M3 If you've already replaced the factory airbox of your E46 M3 for a cold air intake kit, the stock rubber intake elbow (which connects the mass air sensor / HFM to the intake manifold) is now your enemy. The stock S54 part has accordian-like grooves on both the inlet and outlet side, which slows down air flow. It's no wonder you don't see this type of restrictive setup on the E46 M3 CSL! 

The Samco silicone intake boot for E46 M3 has a perfectly smooth interior surface, engineered for the best flow and smoothest transision -- no sharp edges or angles to hang up or slow down the air. Made in the UK using a 4 layer silicone design. Unlike the stock E46 M3 rubber boot, which is prone to drying, cracking and leaking, the Samco boot is virtually indestructable and ready for the rigors of heat temperature and extreme conditions. 

This Samco silicone intake boot fits the following BMWs:
2001-2006  E46 M3  coupe & convertible
Samco
Part #: tb2754-blk
Price: $139.95 (USD) 
Ships in 8 days
Free Shipping Free Shipping
Quantity:   
Idle Control Valve Hose - E36 323i, 328i, M3 3.2, Z3 2.3, 2.8 This is the rubber hose that goes from the idle control valve (ICV) to the intake boot on car with the M52 or S52 engines. A crack in this hose can lead to unmetered and unfiltered air entering the engine which can effect emissions, performance and longevity. We recommend also checking the intake boot for cracks when replacing this hose.

This item fits the following BMWs:
1996-1998 E36 BMW 323is 323ic 328i 328is 328ic M3
1996-1998 Z3 BMW Z3 2.3 Z3 2.8
Conti Tech
Part #: 13411435781
Price: $17.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity: