click to Chat Live
Contact YouTube Blog Twitter facebook Turner Motorsport on Instagram
1-800-280-6966
 |   Login
  • 0
 |   Login
Shopping Cart (0) Wishlist
Contact

(0) item(s) in your Shopping Cart
Home
Categories
Specials Gifts & Clothing
  1. Genuine BMW Accessories
  2. Genuine BMW Clothing
  3. Turner Shirts Hats and Gear
  4. Gifts under $25
  5. Gifts under $50
  6. Gifts under $100
  7. Gifts over $100
  8. Gift Certificates
  9. Stocking Stuffers
  10. Gift Packages
Brakes
  1. Brake Overhaul Packages
  2. Brake Pads
  3. Brake Pad Sensors
  4. Brake Rotors
  5. StopTech Big Brake Kits
  6. Brembo Big Brake Kits
  7. Stainless Steel Brake Lines
  8. Brake Fluid
  9. Brake Calipers
  10. Caliper Rebuild Kits
  11. Parking Brake Parts
  12. Brake Master Cylinders
  13. ABS/DSC System Parts
  14. Brake Cooling Ducts & Backing Plates
  15. Brake Pads - Brembo GT BBK Calipers
  16. Brake Pads - StopTech BBK Calipers
  17. CATuned Big Brake Kits
Car Care & Accessories
  1. Car Covers
  2. Wheel & Tire Cleaning
  3. Wax, Polish and Cleaning Supplies
  4. Detailing Gear
  5. Leather & Plastic Care
  6. Car Cleaning Supplies
  7. Chassis Paint, Coatings, Sealants, and Rust Conversion
Drivetrain
  1. Differential and Gearing Upgrades
  2. Differential Mounts and Upgrades
  3. OEM Clutch Kits & Clutch Parts
  4. Performance Clutch Kits & Parts
  5. Lightweight Aluminum Flywheel Upgrades
  6. Stock OEM Dual Mass Flywheels
  7. Stainless Steel Clutch Lines
  8. Clutch Parts
  9. UUC Short Shift Kits
  10. Axle Shafts
  11. Driveshafts
  12. B&M Short Shifters
  13. Performance Short Shift Kits
  14. UUC DSSR - Double Sheer Selector Rod
  15. Drivershaft Center Support Bearings
  16. Flex Discs & Guibos
  17. Transmission Mounts
  18. Transmission Parts
Engine Chips
  1. Performance Chips, 1986-1995 Models
  2. Shark Injector Performance Software, 1996-2005 Models
  3. Performance Flash Software, 2005+ Models
  4. Sprint Booster Drive-by-Wire Module
  5. Stand-Alone Engine Management
Engine Parts
  1. Engine Performance Packages
  2. Cam Sprockets & Gears
  3. Water Pumps
  4. Thermostats
  5. Radiators & Cooling System Overhaul Kits
  6. Oil Pan Baffles
  7. Radiator Hoses, Cooling Hoses, & Hose Sets
  8. Engine Fans & Fan Clutches
  9. Underdrive Power Pulleys
  10. Camshafts
  11. Schrick Performance Camshafts
  12. E30 M3 S14 Engine Parts
  13. External Engine Parts
  14. Drive Belts & V-Belts
  15. Gaskets, Gasket Sets, Seals, & O-Rings
  16. Factory-Spec Replacement Turbos and Kits
  17. Crankcase Vent, PCV, and Oil Separator Systems
  18. Turbo Upgrades and Kits
  19. Motor Mounts
  20. Electrical Sensors, Switches, & Relays
  21. Ignition Parts
  22. Alternator & Alternator Parts
  23. Starter Motors & Starter Parts
  24. Fuel System Parts
  25. Internal Engine Parts
  26. Cylinder Head Parts & Head Bolts
  27. VANOS Units & Parts
  28. Rod Bearing Kits
  29. Oil Coolers & Oil Cooler Parts
Exhaust
  1. Supersprint Performance Exhaust Systems
  2. Performance Headers & Downpipes
  3. Turner Motorsport Performance Exhaust
  4. Akrapovic Performance Exhaust Systems
  5. Borla Performance Exhaust Systems
  6. Corsa Performance Exhaust Systems
  7. Dinan Free Flow Exhaust Systems
  8. Performance Exhaust Systems
  9. OEM Replacement Mufflers and Exhaust Systems
  10. Exhaust System Upgrades
  11. Exhaust Muffler Tips
  12. Catalytic Converters
  13. Oxygen Sensor - O2 Sensors
  14. Exhaust Gaskets Hangers and Parts
Exterior / Body
  1. Black Grills
  2. Chrome Grills & Trim
  3. Emblems & Decals for Hood, Trunk, and Wheels
  4. Painted Reflectors
  5. Front Spoilers, Bumper Covers, & Air Dams
  6. Rear Spoilers, Rear Wings, & Aprons
  7. Body Trim Parts & Accessories
  8. Carbon Fiber Trunk Lids
  9. Hood & Trunk Shocks, Struts
  10. License Plate Brackets & License Plate Frames
  11. Mirror Kits & Mirror Parts
  12. Window Regulators & Motors
  13. Wiper Blades, Wiper Pumps, & Wiper Motor Parts
  14. Hood Pins and AeroCatch Latches
  15. Racing Tow Hooks and Tow Straps
  16. Aero & Body Kits
Intake
  1. aFe Cold-Air Intake Kits
  2. Turbos & Active Autowerke Superchargers
  3. Dinan Cold Air Intake Kits
  4. Gruppe M Cold-Air Intake Kits
  5. Performance Intake Kits
  6. aFe Performance Air Filters
  7. K&N Performance Air Filters
  8. Replacement Cone Air Filters (for Cold Air Intakes)
  9. Intake Cleaning & Recharging Kits
  10. Intake Manifold Upgrades
  11. Intake Manifold Components (DISA, Vacuum, CCV, Etc)
  12. BOV, Chargepipe, and Intercooler Upgrade Kits
  13. Mass Air Sensor & Air Flow Meters
  14. Intake Boots & Hoses
  15. Throttle Body Parts
  16. Other Intake Kits
Interior
  1. Floor Mats
  2. Gauge Kits and Data Acquisition
  3. Auxiliary Input Adaptors for BMW
  4. Pedal Sets
  5. Escort Radar Detectors
  6. Factory Steering Wheels
  7. Racing Steering Wheels
  8. Shift Knobs, Shift Boots, & Shift Handles
  9. Seats & Seat Accessories
  10. Seat Belts and Racing Harnesses
  11. Cup Holders and Storage
  12. Carbon Fiber Interior Parts
  13. Door Sill Strips
  14. Heating & Air Conditioning
  15. Interior Switches and Switchgear
  16. Sunshades & Windscreens
  17. Interior Trim & Accessories
Lighting
  1. Euro Clear Turn Signals, Parking Lights, & Tail Lights
  2. Turn Signals / Parking Lights
  3. Angel Eye Headlight Conversions
  4. Bulbs for Headlights, Turn Signals and Tail Lights
  5. Headlights, Headlight Lenses, & Headlight Parts
  6. Fog Lights, Fog Light Lenses, & Fog Light Parts
  7. Tail Lights
  8. Stealth Bulbs
Maintenance
  1. Routine Maintenance & Tune-Up Packages
  2. Oil Filters & Oil Filter Kits
  3. Air Filters
  4. Fuel Filters
  5. Cabin Air Filters, Heppa Filters, & Microfilters
  6. Transmission Filter Kits & Transmission Service Parts
  7. Distributor Caps & Rotors
  8. Ignition Coils
  9. Ignition Wires / Spark Plug Wires
  10. Spark Plugs
  11. Bentley Repair / Service Manuals
  12. Service Reset Tools & Fault Code Readers
  13. Anti-Freeze and Coolant
  14. Engine Oils - Genuine BMW and OEM
  15. Power Steering and Hydraulic Fluids
  16. Transmission and Gear Oil - Genuine BMW and OEM
  17. MOTUL Engine Oil and Gear Lubricants
  18. Red Line Oil & Fluids
  19. Liqui-Moly Oil and Additives
Suspension
  1. Shocks & Struts
  2. H&R Performance Springs
  3. Dinan Performance Springs
  4. H&R Cup Kit Shock & Spring Packages
  5. Spring & Shock Packages
  6. Dinan Coilover Spring Kits
  7. Turner / H&R Height Adjustable Spring Sets
  8. Bilstein PSS PSS9 PSS10 Coil Over Suspensions
  9. H&R Coil Over Suspensions
  10. KW Coil Over Suspensions
  11. Moton Coil Overs & Race Shocks
  12. ST Suspension Coilover Kits
  13. Turner Motorsport TrackSport Coil-Over Suspension Kits
  14. Turner Motorsport Racing Suspension Kits
  15. TC Kline Racing Coil Overs
  16. Chassis Reinforcement Kits & Parts
  17. Sway Bar Kits
  18. Sway Bar Links & Sway Bar Parts
  19. Camber / Caster Kits
  20. Strut Braces & Stress Bars
  21. Control Arm Replacements & Upgrades
  22. Suspension Bushings & Mounts
  23. Wheel Bearings & Hub Assemblies
  24. Steering Racks & Power Steering Pumps
  25. Tie Rods & Steering Parts
  26. Coil Over Spring Hardware
  27. CATuned Coilover Kits
  28. AC Schnitzer Suspension Kits
  29. Sachs Performance Coil Over Suspension
  30. AST Suspension
Wheels
  1. Apex Flow Formed Alloy Wheels
  2. Forgeline Custom Forged Alloy Wheels
  3. HRE FlowForm Performance Alloy Wheels
  4. Vorsteiner Wheels
  5. Rohana Wheels
  6. D Force Flow Formed Alloy Wheels
  7. Dinan Performance Wheels
  8. Alpina Alloy Wheels
  9. Original BMW Wheels and Wheel Upgrades
  10. Turner Motorsport Wheel Spacers
  11. ECS Tuning Wheel Spacers
  12. H&R Wheel Spacers
  13. Wheel Bolts, Wheel Studs and Nuts
  14. Wheel Emblems, Caps, and Accessories
  15. High Performance Wheels
Tools
  1. Alignment Tools
  2. Battery Chargers and Tenders
  3. Brake Tools
  4. Clutch Alignment Tools
  5. Coil Over Wrenches
  6. Cooling System Tools
  7. Cylinder Head and VANOS Tools
  8. Exhaust Tools
  9. Fan and Fan Clutch Tools
  10. Fault Code Readers and OBD Scan Tools
  11. Fuel System Tools
  12. Genuine BMW Tool Kits
  13. Oil Service Tools
  14. Sockets
  15. Spark Plug Sockets
  16. Transmission and Differential Tools
  17. Wheel Pin Tools
  18. Workshop Chemicals
Clearance
Choose BMW
BMW 1 Series
  1. (E82) 1-series Coupe 2008+
  2. (E88) 1-series Convertible 2008+
BMW 2 Series
  1. (F22) 2-Series Coupe 2014+
  2. (F23) 2-Series Convertible 2014+
  3. (F87) M2 2016+
BMW 3 Series
  1. (E21) 3-Series 1977-1983
  2. (E30) 3-series 1984-1991
  3. (E30) M3 1988-1991
  4. (E36) 3-series 1992-1999
  5. (E36) M3 1995-1999
  6. (E46) 3-Series 1999-2005
  7. (E46) M3 2001-2006
  8. (E90) 3-Series Sedan 2006-2011
  9. (E90) M3 Sedan 2008-2013
  10. (E91) 3-Series Touring 2006-2013
  11. (E92) 3-Series Coupe 2007-2013
  12. (E92) M3 Coupe 2008-2013
  13. (E93) 3-Series Convertible 2007-2013
  14. (E93) M3 Convertible 2008-2013
  15. (F30) 3-Series Sedan 2012+
  16. (F31) 3-Series Touring 2014+
  17. (F80) M3 2015+
  18. (F34) 3-Series Gran Turismo 2014+
BMW 4 Series
  1. (F32) 4-Series Coupe 2014+
  2. (F33) 4-Series Convertible 2015+
  3. (F34) 4-Series Gran Turismo 2014+
  4. (F82) M4 Coupe 2015+
  5. (F83) M4 Convertible 2015+
  6. (F36) 4-Series Gran Coupe 2015+
BMW 5 Series
  1. (E34) M5 1991-1993
  2. (E39) M5 2000-2003
  3. (E60) M5 2006-2010
  4. (E28) 5-Series 1982-1988
  5. (E34) 5-Series 1989-1995
  6. (E39) 5-Series 1996-2003
  7. (E60) 5-Series Sedan 2004-2010
  8. (E61) 5-Series Touring 2006-2010
  9. (F10) 5-Series 2011+
  10. (G30) 5-Series 2017+
BMW 6 Series
  1. (E24) 6-Series 1977-1989
  2. (E63) 6-Series Coupe 2004-2010
  3. (E64) 6-Series Convertible 2004-2010
  4. (F06) 6-Series Gran Coupe 2013+
  5. (F12) 6-Series Coupe 2011+
  6. (F13) 6-Series Convertible 2011+
BMW 7 Series
  1. (E32) 7-Series 1988-1994
  2. (E38) 7-Series 1995-2001
  3. (E65) 7-Series SWB 2002-2007
  4. (E66) 7-Series LWB 2002-2007
  5. (F01) 7-Series SWB 2009+
  6. (F02) 7-Series LWB 2009+
BMW 8 Series BMW Classics (E9, Bavaria, Isetta, etc)
  1. 2500
  2. 2800
  3. 3.0Si
  4. Bavaria
  5. 2800CS
  6. 3.0CS
  7. 2002
  8. 2002tii
  9. (E12) 528i 1977-1981
  10. (E12) 530i 1975-1978
BMW X Series (SAV)
  1. (E84) X1 Series 2013+
  2. (E83) X3 2004-2010
  3. (F25) X3 2011+
  4. (F26) X4 2015+
  5. (E53) X5 2000-2006
  6. (E70) X5 2007-2013
  7. (F15) X5 2014+
  8. (F85) X5 M 2015+
  9. (E71) X6 2008+
  10. (F16) X6 2015+
  11. (F86) X6 M 2015+
  12. (F48) X1 2016+
  13. (F48) X1 (2016+)
BMW Z Series
  1. (E36/7) Z3 1997-2002
  2. (E85) Z4 M Roadster
  3. (E85/E86/E89) Z4 2003+
  4. (E86) Z4 M Coupe
  5. (E52) Z8 2000-2003
BMW 1600-2002 / tii BMW i Series
  1. (I01) BMW i3 2014+
  2. (I12) BMW i8 2014+
MINI Cooper and Cooper S
Racing
Racing Home Racing News Racing Schedule Racing Photo Gallery
Gallery
Photo Gallery Wallpaper Project Cars
  1. Project i8
  2. Project F80 M3
  3. Turner F82 M4
  4. Turner X5 M
  5. Turner F22 2 Series
  6. Turner F13 M6
  7. Turner F10 M5
  8. Turner F30 335i
  9. Turner E9X M3
  10. Turner E92 335i
  11. Turner E82 1 Series
  12. Turner ActiveE (100% Electric)
  13. Turner E46 M3
  14. Turner E46 330i ZHP
  15. Turner E36 M3
  16. Turner E30 M3
  17. Turner MINI Cooper S
  18. McLaren F1
  19. Turner E92 M3 Lime Rock
  20. Turner F80 M3 Silverstone
Video Gallery
Projects
Turner BMW i8 Turner BMW F80 M3 Turner BMW F82 M4 Turner BMW X5 M Turner BMW F22 2 Series Turner BMW F13 M6 Turner BMW F10 M5 Turner BMW F30 335i Turner BMW E9X M3 Turner BMW E92 335i Turner BMW E82 1 Series Turner BMW ActiveE (100% Electric) Turner BMW E46 M3 Turner BMW E46 330i ZHP Turner BMW E36 M3 Turner BMW E30 M3 Turner MINI Cooper S McLaren F1 Turner BMW E92 M3 Lime Rock Turner BMW F80 M3 Silverstone
About Us
About Turner Motorsport Customer Feedback The Turner Team
  1. Open Positions
Returns Policy Shipping Info Contact Us Privacy Policy Security Policy FAQs

BMW Aero & Body Kits

BMW Aero & Body Kits Body kits include front, side, rear, and other components to completely alter or update the appearance of your BMW. These may not be wild and attention-getting add-ons. We offer many pieces that replicate factory bodywork from M3, M5, M Sport and other BMW factory aero kits. Updating the trim and appearance is a great way to add value and refresh your car's ordinary looks.
For accurate results, specify your model below.
Seibon M3 Style carbon fiber hood - E92 3 series

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2007-2009 BMW E92 325i 325xi 328i 328xi 335i 335xi

Part #: HD0708BMWE922D-B
Price: $1060.00 (USD) 
Quantity:   
Seibon GTR style carbon fiber hood - E60 5 series

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2003 - 2006 E60 Sedan 525i 525xi 530i 530xi 545i 550i 
2007 - 2010 E60 528i 528xi 535i 535ix 550i
2005 - 2010 E60 M5

Part #: HD0407BMWE60GTR
Price: $1530.00 (USD) 
Quantity:   
Turner Motorsport exterior carbon fiber Aero

M3's come from the factory with beautiful aerodynamics and style. But just like anything, there is always room for improvement. Add to the aggressive look of your M3 with these high quality carbon fiber part, front lips to spoilers we have every thing you need to make your M3 stand out. 

Fits These BMWs:
2008+ E92 M3 coupe
 

Part #: E9XCF
Price: $795.00 (USD) 
Seibon GTR style carbon fiber hood - E46 M3

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2003-2006 BMW E46 M3

Part #: HD0105BMWE46M3-G
Price: $1499.99 (USD) 
Quantity:   
2x2 Weave Carbon Fiber Roof - E90 M3

Adding a carbon fiber roof saves you 15kg or more at the highest point of your vehicle - the roof. Not only does a full carbon fiber roof give your vehicle the signature BMW ///M look, but it also gives your vehicle a lower center of gravity.

Turner Motorsport highly recommends professional installation - installation requires removal of factory roof. 

Part #: E90CFROOF-2
Price: $1498.00 (USD) 
Quantity:   
Seibon M3 style carbon fiber hood - F30 3 series

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2012-2017 BMW F30 All 
2014-2017 BMW F32 All

Part #: HD1213BMWF30-BM
Price: $1060.00 (USD) 
Quantity:   
Seibon OE style carbon fiber hood - E90 M3

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2007-2013 BMW E90 M3

Part #: HD0812BMWE90M3-O
Price: $880.00 (USD) 
Quantity:   
Seibon OE style carbon fiber hood - F80 M3

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2014-2017 BMW F80 M3

 

Part #: HD14BMWF80-OE
Price: $782.00 (USD) 
Quantity:   
AC Schnitzer Wide Body Upgrade

AC Schnitzer Wide Body Upgrade "falcon" - E71 X6 - 12 pieces - 12 pieces - not for cars with side view - not for cars with side view - for front and rear fenders - for front and rear fenders - only in connection with AC Schnitzer front spoiler and rear skirt insert !

AC Schnitzer has made a name for themselves with unique areodynamic parts and high quality. One of their benchmarks has become their widebody kits, more specifically the "Falcon" kit for E71s. Here's your chance to own one, and truly set your car apart from the crowd. This was designed to provide an aggressive, individual style to your BMW without being overbearing. Constructed from high-quality components, install is seamless and accentuate your BMW's natural body lines, creating a high-class performance look. 

Fits the following models without side view camera:
2008-2013 E71 BMW X6M

Part #: 511971200
Price: $6295.00 (USD) 
Quantity:   
Seibon M3 style carbon fiber hood - E92 M3

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2006-2013 BMW E92 M3

Part #: HD0708BMWE92M3CT
Price: $918.00 (USD) 
Quantity:   
Center Hood Vent - E36

Standard size hood vent for your E36. Keep your stock motor cool during hot laps.

Based in Baton Rouge, Louisiana, MKAH Motorsports custom designs unique solutions to solve issues that come along with saving weight in your BMW. All parts are precision cut to ensure parts integrate seamlessly in your vehicle - saving you weight while making your car stand out from the crowd.

This product fits the following BMWs:
1992-1999 E36 318i 318is 318ti 320i 323i 325i 325is 328i 328is M3

Part #: MKAH-E36-SCHV
Price: $199.00 (USD) 
Quantity:   
Seibon carbon fiber fenders (pair) - E60 5 series

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2003 - 2006 E60 Sedan 525i 525xi 530i 530xi 545i 550i 
2007 - 2010 E60 528i 528xi 535i 535ix 550i

Part #: FF0607BMWE60
Price: $986.00 (USD) 
Quantity:   
Seibon OE style carbon fiber hood - E60 5 series

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2003-2009 BMW E60 525i 525xi 528i 528xi 535i 535xi 545i 550i

Part #: HD0407BMWE60-OE
Price: $920.00 (USD) 
Quantity:   
Race Skids Heavy Duty Skid Plate - E24 E28

BMWs, just like many other makes, only include plastic under-body shields and are often vulnerable on the underside of the engine bay to debris in the road, track, and off road rally courses. When the vehicles are lowered, they also become vulnerable to damage when bottoming out on high spots in the road, drive ways, and other business entrances. This can pose a serious problem if the oil pan and other sensitive components are damaged when this happens. Cracks in the oil pan could result in a destroyed motor if the oil is allowed to completely leak out and any number of bushings, steering components, or exposed fluid lines could easily be ripped out of place, compromising the safety and control of the vehicle.

To prevent this, Race Skids provides a range of Heavy Duty Skid Plates for many classic BMW models. Constructed from heavy duty 10-gauge steel, these skid plates provide a much needed upgrade to under-body protection, helping to absorb the the impact of debris or the road itself to the bottom of the vehicle. This helps ensure that the oil pan and other components are left completely intact, keeping you on the road with no worries.

An added benefit of these Heavy Duty Skid Plates is a black powder coated surface. This protects the plate itself from oxidation and corrosion, gives the plate a smooth scratch resistant surface, and makes it much easier to clean and maintain, allowing you to simply spray or wipe away built up dirt, salt, or any other build up.

Included with the Skid Plate is all needed mounting hardware. These too are corrosion resistant to allow for easy installation and removal of the skid plate for needed maintenance to the vehicle.

Fits the following Chassis:
E30 BMW 

Fits the following Motor:
M20

Want to install it yourself? Check out the Installation PDF

Part #: RSE24E28all
Price: $204.95 (USD) 
Quantity:   
RKP Carbon Fiber Roof Panel 1x1 Weave - F22/F87

RKP's Carbon Fiber Roof is a direct replacement roof panel weighing only 7.5 lbs, saving you 60% weight when compared to stock. Not only does it look great on your vehicle, but it saves you valuable weight on your M2. This part is 1x1 weave, we also carry RKP's 2x2 weave piece.

Due to the nature of installation, Turner Motorsport strongly recommends professional installation.

This product fits the following BMWs:
2016+ F87 M2

Part #: F87-M2-ROOF-1
Price: $1295.00 (USD) 
Quantity:   
Race Skids Heavy Duty Skid Plate - E30 with M5X/S5X Swap

BMWs, just like many other makes, only include plastic under-body shields and are often vulnerable on the underside of the engine bay to debris in the road, track, and off road rally courses. When the vehicles are lowered, they also become vulnerable to damage when bottoming out on high spots in the road, drive ways, and other business entrances. This can pose a serious problem if the oil pan and other sensitive components are damaged when this happens. Cracks in the oil pan could result in a destroyed motor if the oil is allowed to completely leak out and any number of bushings, steering components, or exposed fluid lines could easily be ripped out of place, compromising the safety and control  of the vehicle.

To prevent this, Race Skids provides a range of Heavy Duty Skid Plates for many classic BMW models. Constructed from heavy duty 10-gauge steel, these skid plates provide a much needed upgrade to under-body protection, helping to absorb the the impact of debris or the road itself to the bottom of the vehicle. This helps ensure that the oil pan and other components are left completely intact, keeping you on the road with no worries.

An added benefit of these Heavy Duty Skid Plates is a black powder coated surface. This protects the plate itself from oxidation and corrosion, gives the plate a smooth scratch resistant surface, and makes it much easier to clean and maintain, allowing you to simply spray or wipe away built up dirt, salt, or any other build up.

Included with the Skid Plate is all needed mounting hardware. These too are corrosion resistant to allow for easy installation and removal of the skid plate for needed maintenance to the vehicle.

Fits the following Chassis:
E30 BMW 

Fits the following Motor:
M50, M52, S50, S52 engine swap

Want to install it yourself? Check out the Installation PDF

Part #: RSE30DOHC
Price: $204.95 (USD) 
Quantity:   
Seibon OE style carbon fiber hood - E46 Coupes

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on battleships, satellites and high performance racecars. Supporting race teams is one of Seibons' main specialties and you will see their work in many racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2003-2006 E46 BMW 325ci 330ci 
 

Part #: HD0205BMWE462D-O
Price: $820.00 (USD) 
Quantity:   
Standard Hood Side Vents - E36

These hood vents measure 16" long and 7" wide - the Standard Hood Vents are meant for keeping your NA motor cool during spirited driving or on the track. Does not include center vent.

Features:

  • Black powder coated aluminum
  • Vents ship flat, allowing each piece to be hand bent to fit your mounting area
  • Includes all required hardware

Based in Baton Rouge, Louisiana, MKAH Motorsports custom designs unique solutions to solve issues that come along with saving weight in your BMW. All parts are precision cut to ensure parts integrate seamlessly in your vehicle - saving you weight while making your car stand out from the crowd.

This product fits the following BMWs:
1992-1999 E36 318i 318is 318ti 320i 323i 325i 325is 328i 328is M3

Part #: MKAH-E36-SSHV
Price: $169.00 (USD) 
Quantity:   
Seibon dual vent carbon fiber hood - F30, F32 3 series

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2012-2017 BMW F30 All 
2014-2017 BMW F32 All

Part #: HD1213BMWF30-VR
Price: $1200.00 (USD) 
Quantity:   
Rear Diffuser - E36

Features:

  • water jet precision cut
  • under tray reaches the front of the spare tire well
  • designed to prevent air from flowing between diffuser and vehicle - ensuring its effectiveness
  • Made in the USA
  • Fits M and non-M bumpers

Based in Baton Rouge, Louisiana, MKAH Motorsports custom designs unique solutions to solve issues that come along with saving weight in your BMW. All parts are precision cut to ensure parts integrate seamlessly in your vehicle - saving you weight while making your car stand out from the crowd.

This product fits the following BMWs:
1992-1999 E36 318i 318is 318ti 320i 323i 325i 325is 328i 328is M3

Part #: E36-DK
Price: $439.00 (USD) 
Quantity:   
Large Center Hood Vent - E36

Keep your motor cool during hot laps with MKAH Motorsports' Large Center Hood Vent.

Based in Baton Rouge, Louisiana, MKAH Motorsports custom designs unique solutions to solve issues that come along with saving weight in your BMW. All parts are precision cut to ensure parts integrate seamlessly in your vehicle - saving you weight while making your car stand out from the crowd.

This product fits the following BMWs:
1992-1999 E36 318i 318is 318ti 320i 323i 325i 325is 328i 328is M3

Part #: MKAH-E36-LCHV
Price: $239.00 (USD) 
Quantity:   
Extreme Hood Vent Set - E36

Experiencing heat soak after a few hot laps? These hood vents measure 22" long - the Extreme Hood Vents are meant for keeping your motor cool in race and big turbo applications. Includes center vent and 2 side vents.

Features:

  • 3 additional vents in comparison to MKAH's standard vents
  • Black powder coated aluminum
  • Vents ship flat, allowing each piece to be hand bent to fit your mounting area
  • Includes all required hardware

Based in Baton Rouge, Louisiana, MKAH Motorsports custom designs unique solutions to solve issues that come along with saving weight in your BMW. All parts are precision cut to ensure parts integrate seamlessly in your vehicle - saving you weight while making your car stand out from the crowd.

This product fits the following BMWs:
1992-1999 E36 318i 318is 318ti 320i 323i 325i 325is 328i 328is M3

Part #: MKAH-E36-LHV-SET
Price: $359.00 (USD) 
Quantity:   
HARD Motorsport Fender Flares V2 - BMW E36 Coupe

The V2 fender flares from HARD Motorsport allow you to run run wider tires and spacers that help improve handling at track days and autocross sections. Matching the E46 330 Fender Style plus an additional 20mm in width, this full kit adds an aggressive look to your E36 while still keeping a relatively factory appearance. Because of this, all original molding are still able to be used to maintain this look. 

The fender flares are easily installed with pop-rivets and are made from plastic instead of fiberglass, keeping them less likely to have cracking and splitting from normal wear and tear.

Allows fitment of up to 285/30/18 rubber on 18x10 et25 wheels on both the front and rear of your E36. Other combinations are possible but may require slight adjustment for optimal fitment.

 

Product fits the following vehicles:

E36 BMW M3 (And all other e36 coupes with M mouldings)

Part #: FLARES.E36.2Dv2
Price: $449.99 (USD) 
Free Shipping Free Shipping
Quantity:   
Seibon M3 style carbon fiber hood - E92 M3

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2006-2013 BMW E92 M3

Part #: HD0708BMWE92M3-O
Price: $840.00 (USD) 
Quantity:   
Race Skids Heavy Duty Skid Plate - E34 BMW M30

BMWs, just like many other makes, only include plastic under-body shields and are often vulnerable on the underside of the engine bay to debris in the road, track, and off road rally courses. When the vehicles are lowered, they also become vulnerable to damage when bottoming out on high spots in the road, drive ways, and other business entrances. This can pose a serious problem if the oil pan and other sensitive components are damaged when this happens. Cracks in the oil pan could result in a destroyed motor if the oil is allowed to completely leak out and any number of bushings, steering components, or exposed fluid lines could easily be ripped out of place, compromising the safety and control of the vehicle.

To prevent this, Race Skids provides a range of Heavy Duty Skid Plates for many classic BMW models. Constructed from heavy duty 10-gauge steel, these skid plates provide a much needed upgrade to under-body protection, helping to absorb the the impact of debris or the road itself to the bottom of the vehicle. This helps ensure that the oil pan and other components are left completely intact, keeping you on the road with no worries.

An added benefit of these Heavy Duty Skid Plates is a black powder coated surface. This protects the plate itself from oxidation and corrosion, gives the plate a smooth scratch resistant surface, and makes it much easier to clean and maintain, allowing you to simply spray or wipe away built up dirt, salt, or any other build up.

Included with the Skid Plate is all needed mounting hardware. These too are corrosion resistant to allow for easy installation and removal of the skid plate for needed maintenance to the vehicle.

Fits the following Chassis:
E34 BMW 530i 535i

Fits the following Motor:
M30

Want to install your skid plate yourself? Check out the Installation PDF

Part #: RSE34m30
Price: $204.95 (USD) 
Quantity:   
Seibon M3 style carbon fiber hood - E92 3 series

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2009-2013 BMW E92 328i 328xi 335i 335xi 

Part #: HD1112BMWE922D-B
Price: $1060.00 (USD) 
Quantity:   
ARMA Speed Design F87 M2 Double Sided Vacuum Carbon Fiber Hood

This is the hood you need to give your M2 the edge you crave. Expertly crafted from only the best Carbon Fiber and laid in a consistent weave pattern, these hoods not only look amazing but shed weight in the process. Weight savings of over 20lbs are possible with this change which will, in turn, lead to better weight distribution- crucial to getting the most out of any vehicles handling capabilities

ARMA is originally a Latin word-it signifies “weapons of war” or “defensive arms”. Starting out as a single car enthusiast customizing and building project cars in their own garage, ARMA Speed has more than 25 years of experience in carbon fiber industry and is now considered one of the carbon fiber leaders in the field. ARMA not only specializes in Hyperflow carbon intake systems, it also excels at brake and exhaust valve systems and carbon fiber body parts that aim to continually increase the level of customer satisfaction. Extensive product testing is done as well as constant improvements and changes to the manufacturing process. Innovation is a constant journey at ARMA, their patented designs are the product of the constant pursuit of improvement and something that can be truly recognized from an outside perspective. 

Available in glossy clearcoat or matte finishes, the hood looks great out of the box or is ready to color match it to the car. 

Features:

  • 20lb weight savings over stock
  • Comes clear coated or ready for paint
  • Vacuum infusion technology leads to an extremely durable product
Part #: BMF87M2HDM
Price: $2495.00 (USD) 
Free Shipping Free Shipping
Quantity:   
Vorsteiner GTRS3 Widebody kit - E92 E93 M3

Vorsteiner is a company that was conceived through the imagination of creating the highest quality parts for the most discerning vehicles and clientele. The relentless pursuit of advancement and perfection is seen not only in the unmatched automotive parts, but also in the hands of carbon fiber craftsmen to create purely sensational parts for the most deserving and elite vehicles. 

This LIMITED PRODUCTION Kit includes:

  • GTRS3 Aero Front Bumper with front spoiler
  • GTRS3 Aero Front Fenders - Driver and Passenger Side
  • GTRS3 Aero Side Skirts - Driver and Passenger Side
  • GTRS3 Aero Rear Bumper with diffuser
  • GTRS3 Aero Rear Fenders - Driver and Passenger Side
Part #: GTRS3
Price: $6995.00 (USD) 
Quantity:   
Extreme Side Hood Vents - E36

Experiencing heat soak after a few hot laps? These hood vents measure 22" long - the Extreme Hood Vents are meant for keeping your motor cool in race and big turbo applications. 

Features:

  • 3 additional vents in comparison to MKAH's standard vents
  • Black powder coated aluminum
  • Vents ship flat, allowing each piece to be hand bent to fit your mounting area
  • Includes all required hardware

Based in Baton Rouge, Louisiana, MKAH Motorsports custom designs unique solutions to solve issues that come along with saving weight in your BMW. All parts are precision cut to ensure parts integrate seamlessly in your vehicle - saving you weight while making your car stand out from the crowd.

This product fits the following BMWs:
1992-1999 E36 318i 318is 318ti 320i 323i 325i 325is 328i 328is M3

Part #: MKAH-E36-ESHV
Price: $189.00 (USD) 
Quantity:   
Seibon GTR style carbon fiber hood - E46 3 series coupe

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
1999-2002 BMW E46 323ci 325ci 328ci 330ci

Part #: HD9902BMWE462D-G
Price: $1600.00 (USD) 
Quantity:   
Race Skids Heavy Duty Skid Plate - E34 BMW 540i

BMWs, just like many other makes, only include plastic under-body shields and are often vulnerable on the underside of the engine bay to debris in the road, track, and off road rally courses. When the vehicles are lowered, they also become vulnerable to damage when bottoming out on high spots in the road, drive ways, and other business entrances. This can pose a serious problem if the oil pan and other sensitive components are damaged when this happens. Cracks in the oil pan could result in a destroyed motor if the oil is allowed to completely leak out and any number of bushings, steering components, or exposed fluid lines could easily be ripped out of place, compromising the safety and control of the vehicle.

To prevent this, Race Skids provides a range of Heavy Duty Skid Plates for many classic BMW models. Constructed from heavy duty 10-gauge steel, these skid plates provide a much needed upgrade to under-body protection, helping to absorb the the impact of debris or the road itself to the bottom of the vehicle. This helps ensure that the oil pan and other components are left completely intact, keeping you on the road with no worries.

An added benefit of these Heavy Duty Skid Plates is a black powder coated surface. This protects the plate itself from oxidation and corrosion, gives the plate a smooth scratch resistant surface, and makes it much easier to clean and maintain, allowing you to simply spray or wipe away built up dirt, salt, or any other build up.

Included with the Skid Plate is all needed mounting hardware. These too are corrosion resistant to allow for easy installation and removal of the skid plate for needed maintenance to the vehicle.

Fits the following Chassis:
E34 BMW 540i

Fits the following Motor:
M60

Part #: RSE34m60
Price: $204.95 (USD) 
Quantity:   
HARD Motorsport LEICHTBAU 6 Piece Body Kit -- E90/E91 BMW

Inspired by the BMW Motorsport WTCC E90's, the HARD Motorsport LEICHTBAU E90 Widebody kit will give your E90/E91 significantly more width to run aggressive wheel and tie combo's. Extensive  design and installations have created a practical widebody kit that would incorporate stock body panels, prevent a ton of custom body work. Made from thermoformed ABS plastic, these kits are durable and flexible and easily modified for slight fitment adjustments when installed.

Product Specifications:

  • Modification and cutting of stock fenders is required to properly fit this kit.
  • Rivets provided for installation. (Kit may be installed with automotive body adhesive)
  • The width of the flare will vary along the wheel arch. Our test and measurements show approximately 50mm in added width at each wheel at the widest point. For example, we are running an 18x11 et0 with a bit of room to spare.  The E90 shown is currently running these wheels with 285/30 18 Dunlop Star Spec. (per class rules) We have PLENTY of room for more tire. Ideally we would be running a 315 square. Up to a 335 has been fit in the rear with this rear overfender.
  • Front nose panels designed for fitment to the aftermarket, Non-M E90 M-TECH, pre-LCI front bumper. (Sold Separately)  !!!! This bumper CAN be installed on a LCI model E90. Simply install your LCI kidney grills !!!!

 

Fits the following vehicles:

E90/E91 BMW's w/ M-Tech Front Bumper

Part #: E90.WIDEBODY
Price: $1199.00 (USD) 
Free Shipping Free Shipping
Quantity:   
ARMA Speed Design F87 M2 Double Sided Vacuum Carbon Fiber Hood

This is the hood you need to give your M2 the edge you crave. Expertly crafted from only the best Carbon Fiber and laid in a consistent weave pattern, these hoods not only look amazing but shed weight in the process. Weight savings of over 20lbs are possible with this change which will, in turn, lead to better weight distribution- crucial to getting the most out of any vehicles handling capabilities

ARMA is originally a Latin word-it signifies “weapons of war” or “defensive arms”. Starting out as a single car enthusiast customizing and building project cars in their own garage, ARMA Speed has more than 25 years of experience in carbon fiber industry and is now considered one of the carbon fiber leaders in the field. ARMA not only specializes in Hyperflow carbon intake systems, it also excels at brake and exhaust valve systems and carbon fiber body parts that aim to continually increase the level of customer satisfaction. Extensive product testing is done as well as constant improvements and changes to the manufacturing process. Innovation is a constant journey at ARMA, their patented designs are the product of the constant pursuit of improvement and something that can be truly recognized from an outside perspective. 

Available in glossy clearcoat or matte finishes, the hood looks great out of the box or is ready to color match it to the car. 

Features:

  • 20lb weight savings over stock
  • Comes clear coated or ready for paint
  • Vacuum infusion technology leads to an extremely durable product
Part #: BMF87M2HDG
Price: $2495.00 (USD) 
Free Shipping Free Shipping
Quantity:   
Genuine BMW CSL Rear Decklid - E46 M3 Looking to replace your trunk lid with the lighter and sportier  CSL trunk lid? This OE deck lid is direct from Germany and guaranteed to fit like stock.
Part #: 41007895884
Price: $1099.95 (USD) 
Quantity:   
Race Skids Heavy Duty Skid Plate - E30 BMW M20

BMWs, just like many other makes, only include plastic under-body shields and are often vulnerable on the underside of the engine bay to debris in the road, track, and off road rally courses. When the vehicles are lowered, they also become vulnerable to damage when bottoming out on high spots in the road, drive ways, and other business entrances. This can pose a serious problem if the oil pan and other sensitive components are damaged when this happens. Cracks in the oil pan could result in a destroyed motor if the oil is allowed to completely leak out and any number of bushings, steering components, or exposed fluid lines could easily be ripped out of place, compromising the safety and control of the vehicle.

To prevent this, Race Skids provides a range of Heavy Duty Skid Plates for many classic BMW models. Constructed from heavy duty 10-gauge steel, these skid plates provide a much needed upgrade to under-body protection, helping to absorb the the impact of debris or the road itself to the bottom of the vehicle. This helps ensure that the oil pan and other components are left completely intact, keeping you on the road with no worries.

An added benefit of these Heavy Duty Skid Plates is a black powder coated surface. This protects the plate itself from oxidation and corrosion, gives the plate a smooth scratch resistant surface, and makes it much easier to clean and maintain, allowing you to simply spray or wipe away built up dirt, salt, or any other build up.

Included with the Skid Plate is all needed mounting hardware. These too are corrosion resistant to allow for easy installation and removal of the skid plate for needed maintenance to the vehicle.

Fits the following Chassis:
E30 BMW 

Fits the following Motor:
M20

Want to install it yourself? Check out the Installation PDF

Part #: RSE30m20
Price: $204.95 (USD) 
Quantity:   
Race Skids Heavy Duty Skid Plate - E30 with M30 Swap

BMWs, just like many other makes, only include plastic under-body shields and are often vulnerable on the underside of the engine bay to debris in the road, track, and off road rally courses. When the vehicles are lowered, they also become vulnerable to damage when bottoming out on high spots in the road, drive ways, and other business entrances. This can pose a serious problem if the oil pan and other sensitive components are damaged when this happens. Cracks in the oil pan could result in a destroyed motor if the oil is allowed to completely leak out and any number of bushings, steering components, or exposed fluid lines could easily be ripped out of place, compromising the safety and control of the vehicle.

To prevent this, Race Skids provides a range of Heavy Duty Skid Plates for many classic BMW models. Constructed from heavy duty 10-gauge steel, these skid plates provide a much needed upgrade to under-body protection, helping to absorb the the impact of debris or the road itself to the bottom of the vehicle. This helps ensure that the oil pan and other components are left completely intact, keeping you on the road with no worries.

An added benefit of these Heavy Duty Skid Plates is a black powder coated surface. This protects the plate itself from oxidation and corrosion, gives the plate a smooth scratch resistant surface, and makes it much easier to clean and maintain, allowing you to simply spray or wipe away built up dirt, salt, or any other build up.

Included with the Skid Plate is all needed mounting hardware. These too are corrosion resistant to allow for easy installation and removal of the skid plate for needed maintenance to the vehicle.

Fits the following Chassis:
E30 BMW 

Fits the following Motor:
M30 Swap

Want to install it yourself? Check out the Installation PDF

Part #: RSE30M30
Price: $204.95 (USD) 
Quantity:   
Seibon OE style carbon fiber hood - F10 5 series

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2009-2016 BMW F10 all excluding M5

Part #: HD1012BMWF10-OE
Price: $745.20 (USD) 
$920.00
Limited Qty Sale
Quantity:   
Genuine BMW Hardtop-Preparation - 54217146749 - E46,E46 M3

Includes all the wiring that is need to install a hardtop on your convertible BMW.


Genuine BMW Hardtop-Preparation
This item fits the following BMW Chassis:
E46 M3,E46
 

 

Part #: 54217146749
Price: $132.95 (USD) 
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
RKP Carbon Fiber Diffuser 2x2 Weave - F87 M2

RKP's rear diffuser adds aggressive exterior styling to your M2 in just minutes after simple installation.

This product fits the following BMWs:
2016+ F87 M2

Part #: RKP-F87-RD
Price: $795.00 (USD) 
Quantity:   
E82 Hartge Front Lip Spoiler Hartge's front chin spoiler adds a lot of character to the 1-series' front end. The lines of this lip spoiler closely follow the stock M Aero package front spoiler and add definition and heft to BMW's smallest car. This add-on spoiler gives the 128i or 135i extra presence and makes it look unique. When installed, the spoiler becomes 1.5" closer to the pavement. This spoiler is made from high-quality PU-RIM urethane, just like the factory bumper and aero pieces. The urethane material means it is lighter than a fiberglass piece, less resistent to warping from heat, and has some flexability to keep from cracking during an impact. Installation adhesive is included.

This lip spoiler fits the following BMWs:
2008-2012  E82 BMW  128i 135i coupe ( only cars with M Aero Package front spoiler )
2008-2012  E88 BMW  128i 135i convertible ( only cars with M Aero Package front spoiler )
Part #: 51820100
Price: $459.95 (USD) 
$534.95
Limited Qty Sale
Quantity:   
1x1 Weave Carbon Fiber Roof - E82 135i 1M

Adding a carbon fiber roof saves you 15kg or more at the highest point of your vehicle - the roof. Not only does a full carbon fiber roof give your vehicle the signature BMW ///M look, but it also gives your vehicle a lower center of gravity.

Turner Motorsport highly recommends professional installation - installation requires removal of factory roof. 

Part #: E82CFROOF-1
Price: $1498.00 (USD) 
Quantity:   
Vorsteiner GTRS4 Widebody Kit - F82 M4

Vorsteiner is a company that was conceived through the imagination of creating the highest quality parts for the most discerning vehicles and clientele. The relentless pursuit of advancement and perfection is seen not only in the unmatched automotive parts, but also in the hands of carbon fiber craftsmen to create purely sensational parts for the most deserving and elite vehicles. 

This LIMITED PRODUCTION Kit includes:

  • GTRS3 Aero Front Bumper with front spoiler
  • GTRS3 Aero Front Fenders - Driver and Passenger Side
  • GTRS3 Aero Side Skirts - Driver and Passenger Side
  • GTRS3 Aero Rear Bumper with diffuser
  • GTRS3 Aero Rear Fenders - Driver and Passenger Side
Part #: GTRS4
Price: $20995.00 (USD) 
Free Shipping Free Shipping
Quantity:   
Race Skids Heavy Duty Skid Plate - E30 BMW M42

BMWs, just like many other makes, only include plastic under-body shields and are often vulnerable on the underside of the engine bay to debris in the road, track, and off road rally courses. When the vehicles are lowered, they also become vulnerable to damage when bottoming out on high spots in the road, drive ways, and other business entrances. This can pose a serious problem if the oil pan and other sensitive components are damaged when this happens. Cracks in the oil pan could result in a destroyed motor if the oil is allowed to completely leak out and any number of bushings, steering components, or exposed fluid lines could easily be ripped out of place, compromising the safety and control of the vehicle.

To prevent this, Race Skids provides a range of Heavy Duty Skid Plates for many classic BMW models. Constructed from heavy duty 10-gauge steel, these skid plates provide a much needed upgrade to under-body protection, helping to absorb the the impact of debris or the road itself to the bottom of the vehicle. This helps ensure that the oil pan and other components are left completely intact, keeping you on the road with no worries.

An added benefit of these Heavy Duty Skid Plates is a black powder coated surface. This protects the plate itself from oxidation and corrosion, gives the plate a smooth scratch resistant surface, and makes it much easier to clean and maintain, allowing you to simply spray or wipe away built up dirt, salt, or any other build up.

Included with the Skid Plate is all needed mounting hardware. These too are corrosion resistant to allow for easy installation and removal of the skid plate for needed maintenance to the vehicle.

Fits the following Chassis:
E30 BMW 318i/is

Fits the following Motor:
M42

Want to install it yourself? Check out the Installation PDF

Part #: RSE30M42
Price: $204.95 (USD) 
Quantity:   
Seibon GTR style carbon fiber hood - E90 3 series

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2007-2009 BMW E90 All non M submodels

Part #: HD0910BMWE90-GTR
Price: $1360.00 (USD) 
Quantity:   
Race Skids Heavy Duty Skid Plate - E30 325ix

BMWs, just like many other makes, only include plastic under-body shields and are often vulnerable on the underside of the engine bay to debris in the road, track, and off road rally courses. When the vehicles are lowered, they also become vulnerable to damage when bottoming out on high spots in the road, drive ways, and other business entrances. This can pose a serious problem if the oil pan and other sensitive components are damaged when this happens. Cracks in the oil pan could result in a destroyed motor if the oil is allowed to completely leak out and any number of bushings, steering components, or exposed fluid lines could easily be ripped out of place, compromising the safety and control of the vehicle.

To prevent this, Race Skids provides a range of Heavy Duty Skid Plates for many classic BMW models. Constructed from heavy duty 10-gauge steel, these skid plates provide a much needed upgrade to under-body protection, helping to absorb the the impact of debris or the road itself to the bottom of the vehicle. This helps ensure that the oil pan and other components are left completely intact, keeping you on the road with no worries.

An added benefit of these Heavy Duty Skid Plates is a black powder coated surface. This protects the plate itself from oxidation and corrosion, gives the plate a smooth scratch resistant surface, and makes it much easier to clean and maintain, allowing you to simply spray or wipe away built up dirt, salt, or any other build up.

Included with the Skid Plate is all needed mounting hardware. These too are corrosion resistant to allow for easy installation and removal of the skid plate for needed maintenance to the vehicle.

Fits the following Chassis:
1985-1991 E30 BMW 325ix

Part #: RSE30IX
Price: $204.95 (USD) 
Quantity:   
AC Schnitzer Wide Body Upgrade

AC Schnitzer Wide Body Upgrade "falcon" - E71 X6 - 12 pieces - for cars with side view - for front and rear fenders - only in connection with AC Schnitzer front spoiler and rear skirt insert ! - In connecting with series front spoiler on request!

AC Schnitzer has made a name for themselves with unique areodynamic parts and high quality. One of their benchmarks has become their widebody kits, more specifically the "Falcon" kit for E71s. Here's your chance to own one, and truly set your car apart from the crowd. This was designed to provide an aggressive, individual style to your BMW without being overbearing. Constructed from high-quality components, install is seamless and accentuate your BMW's natural body lines, creating a high-class performance look. 

Fits the following models with side view camera:
2008-2013 E71 BMW X6M

Part #: 511971350
Price: $6295.00 (USD) 
Quantity:   
Vacuumed Carbon Fiber Diffuser - F80 M3 F82 M4

We developed this center diffuser from carbon fiber to make the rear end of the M3/M4 more functional and add aesthetic appeal. Our rear diffuser is made of 100% true vacuumed carbon fiber for the ultimate weight savings, durability and precision fitment.

Includes one rear center diffuser and mounting hardware. Installation is simple and can be accomplished in your own garage - simply line the diffuser up with your rear bumper and mount using the supplied hardware.

This product fits the following BMWs:
2015+ F80 M3
2015+ F82 M4 

Part #: BM-0352
Price: $699.95 (USD) 
Quantity:   
HARD Motorsport Fender Flares - BMW E36 Sedan, E36

The V1 fender flares from HARD Motorsport allow you to run run wider tires and spacers that help improve handling at track days and autocross sections. Matching the E46 330 Fender Style, this full kit adds an aggressive look to your E36 while still keeping a relatively factory appearance. Because of this, all original molding are still able to be used to maintain this look. 

The fender flares are easily installed with pop-rivets and are made from plastic instead of fiberglass, keeping them less likely to have cracking and splitting from normal wear and tear.

Allows fitment of up to 275/35/18 rubber on 18x9.5 ET35 wheels on both the front and rear of your E36. Other combinations are possible but may require slight adjustment for optimal fitment.

 

Product fits the following vehicles:

E36 BMW Sedan and "ti" models

Part #: FLARES.E36_4D
Price: $399.99 (USD) 
Quantity:   
2x2 Weave Carbon Fiber Roof - E82 135i 1M

Adding a carbon fiber roof saves you 15kg or more at the highest point of your vehicle - the roof. Not only does a full carbon fiber roof give your vehicle the signature BMW ///M look, but it also gives your vehicle a lower center of gravity.

Turner Motorsport highly recommends professional installation - installation requires removal of factory roof. 

 

Part #: E82CFROOF-2
Price: $1498.00 (USD) 
Quantity:   
Seibon OE style carbon fiber hood - E46 3 series sedan

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2002-2006 BMW E46 325i 325xi 328i 330i 330xi

Part #: HD0205BMWE464D-O
Price: $820.00 (USD) 
Quantity:   
Seibon GTR style carbon fiber hood - E46 3 series coupes

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2003-2006 BMW E46 325ci 330ci

Part #: HD0205BMWE462D-G
Price: $1600.00 (USD) 
Quantity:   
Seibon GTR style carbon fiber hood - E82 1 series

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2004 - 2013 E82 1 Series Coupe 128i 135i 135is 1M Coupe

Part #: HD0809BMWE822D-G
Price: $1360.00 (USD) 
Quantity:   
Race Skids Heavy Duty Skid Plate - E34 M5

BMWs, just like many other makes, only include plastic under-body shields and are often vulnerable on the underside of the engine bay to debris in the road, track, and off road rally courses. When the vehicles are lowered, they also become vulnerable to damage when bottoming out on high spots in the road, drive ways, and other business entrances. This can pose a serious problem if the oil pan and other sensitive components are damaged when this happens. Cracks in the oil pan could result in a destroyed motor if the oil is allowed to completely leak out and any number of bushings, steering components, or exposed fluid lines could easily be ripped out of place, compromising the safety and control of the vehicle.

To prevent this, Race Skids provides a range of Heavy Duty Skid Plates for many classic BMW models. Constructed from heavy duty 10-gauge steel, these skid plates provide a much needed upgrade to under-body protection, helping to absorb the the impact of debris or the road itself to the bottom of the vehicle. This helps ensure that the oil pan and other components are left completely intact, keeping you on the road with no worries.

An added benefit of these Heavy Duty Skid Plates is a black powder coated surface. This protects the plate itself from oxidation and corrosion, gives the plate a smooth scratch resistant surface, and makes it much easier to clean and maintain, allowing you to simply spray or wipe away built up dirt, salt, or any other build up.

Included with the Skid Plate is all needed mounting hardware. These too are corrosion resistant to allow for easy installation and removal of the skid plate for needed maintenance to the vehicle.

Fits the following Chassis:
E34 BMW M5

Fits the following Motor:
S38

Want to install your skid plate yourself? Check out the Install PDF

Part #: RSE34m
Price: $204.95 (USD) 
Quantity:   
Seibon OE style carbon fiber hood - E92 3 series

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2007-2009 BMW E92 325i 325xi 328i 328xi 335i 335xi

Part #: HD0708BMWE922D-O
Price: $820.00 (USD) 
Quantity:   
Seibon OE style carbon fiber hood - E90 3 series

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2007-2009 BMW E90 All non M submodels

Part #: HD0507BMWE90-OE
Price: $820.00 (USD) 
Quantity:   
Seibon M3 style carbon fiber hood - E90 3 series

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2009-2013 BMW E90 All non M submodels

Part #: HD0910BMWE90-BM
Price: $1060.00 (USD) 
Quantity:   
HARD Motorsport

HARD Motorsport M3 fender flares offer nearly 35mm of added clearance, allowing you to run run wider tires and spacers that help improve handling at track days and autocross sections. Matching the M3 Fender Style, this full kit adds an aggressive look, while still keeping a factory appearance.  

The fender flares are easily installed with pop-rivets and are made from plastic instead of fiberglass, keeping them less likely to have cracking and splitting from normal wear and tear.

 

Product fits the following vehicles:

E46 BMW Non-M Coupes

Part #: FULLFLAREKTE462D
Price: $474.00 (USD) 
Free Shipping Free Shipping
Quantity:   
Seibon GTR style carbon fiber hood - E90 3 series

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2007-2009 BMW E90 All non M submodels

Part #: HD0507BMWE90-GTR
Price: $1360.00 (USD) 
Quantity:   
Seibon GTR style carbon fiber hood - F30 3 series

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2012-2017 BMW F30 All 
2014-2017 BMW F32 All

Part #: HD1213BMWF30-GTR
Price: $1360.00 (USD) 
Quantity:   
Seibon dual vented carbon fiber hood - F10 5 series

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2009-2016 BMW F10 all excluding M5

Part #: HD1012BMWF10-BT
Price: $1140.00 (USD) 
Quantity:   
Seibon carbon fiber hood - E92 M3

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2008-2013 E92 BMW M3

Part #: HD0708BMWE92M3OE
Price: $714.00 (USD) 
Quantity:   
Seibon OE style carbon fiber hood - F30 3 series

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2012-2017 BMW F30 All 
2014-2017 BMW F32 All

Part #: HD1213BMWF30-OE
Price: $820.00 (USD) 
Quantity:   
Race Skids Heavy Duty Skid Plate - E39 M5 & 540i

BMWs, just like many other makes, only include plastic under-body shields and are often vulnerable on the underside of the engine bay to debris in the road, track, and off road rally courses. When the vehicles are lowered, they also become vulnerable to damage when bottoming out on high spots in the road, drive ways, and other business entrances. This can pose a serious problem if the oil pan and other sensitive components are damaged when this happens. Cracks in the oil pan could result in a destroyed motor if the oil is allowed to completely leak out and any number of bushings, steering components, or exposed fluid lines could easily be ripped out of place, compromising the safety and control of the vehicle.

To prevent this, Race Skids provides a range of Heavy Duty Skid Plates for many classic BMW models. Constructed from heavy duty 10-gauge steel, these skid plates provide a much needed upgrade to under-body protection, helping to absorb the the impact of debris or the road itself to the bottom of the vehicle. This helps ensure that the oil pan and other components are left completely intact, keeping you on the road with no worries.

An added benefit of these Heavy Duty Skid Plates is a black powder coated surface. This protects the plate itself from oxidation and corrosion, gives the plate a smooth scratch resistant surface, and makes it much easier to clean and maintain, allowing you to simply spray or wipe away built up dirt, salt, or any other build up.

Included with the Skid Plate is all needed mounting hardware. These too are corrosion resistant to allow for easy installation and removal of the skid plate for needed maintenance to the vehicle.

Fits the following Chassis:
E39 BMW M5 540i

Fits the following Motor:
S62, M62

Want to install it yourself? Check out the Installation PDF

Part #: RSE398FR
Price: $319.95 (USD) 
Quantity:   
HARD Motorsport

HARD Motorsport M3 fender flares offer nearly 35mm of added clearance, allowing you to run run wider tires and spacers that help improve handling at track days and autocross sections. Matching the M3 Fender Style, this full kit adds an aggressive look, while still keeping a factory appearance.  

The fender flares are easily installed with pop-rivets and are made from plastic instead of fiberglass, keeping them less likely to have cracking and splitting from normal wear and tear.

 

Product fits the following vehicles:

E46 BMW Non-M Sedan

Part #: FULLFLAREKTE464D
Price: $475.00 (USD) 
Free Shipping Free Shipping
Quantity:   
Seibon M3 style carbon fiber hood - E90 3 series

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2006 - 2008 E90 323i 325i 325xi 328i 328xi 330i 330xi 335i 335xi
2009-2012 E90 323i 323i 328i 328xi 335d 335i 335i xDrive 335xi

Part #: HD0910BMWE90BM
Price: $901.00 (USD) 
Quantity:   
Seibon OE style carbon fiber hood - F22 2 series

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2012-2017 BMW F22  228i 228iX 230i 230iX M235i M235iX M240 M240iX

Part #: HD11BMWF20-OE
Price: $697.00 (USD) 
Quantity:   
Turner Carbon Fiber CSL Roof Panel

This carbon fiber E46 roof panel is a direct replacement for the steel roof, saving nearly 50 pounds of weight from a critically high point in the vehicle - reducing body roll and improving overall performance, while giving you a smooth and clean surface when deleting your sunroof. It was inspired by the carbon roof used on the E46 M3 CSL and carried over to other M models and imitated in the aftermarket. Don't bother with carbon fiber vinyl and step up to the real thing! This carbon roof is now available after several years of painstaking development and test fits. We're excited to offer this high quality carbon roof at a competitive price!

This carbon roof is made in the USA and designed to fit just like the factory CSL piece. When properly installed, it fits and looks just like it came from the factory. Minimal prep is required to install it, however, professional installation is encouraged. Fits coupe models only.

Part #: 012315TMS
Price: $1399.95 (USD) 
Seibon OE style carbon fiber hood - E90 3 series

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2009-2013 BMW E90 All non M submodels

Part #: HD0910BMWE90-OE
Price: $820.00 (USD) 
Quantity:   
RKP Carbon Fiber Roof Panel 2x2 Weave - F22/F87

RKP's Carbon Fiber Roof is a direct replacement roof panel weighing only 7.5 lbs, saving you 60% weight when compared to stock. Not only does it look great on your vehicle, but it saves you valuable weight on your M2. This part is 2x2 weave, we also carry RKP's 1x1 weave piece.

Due to the nature of installation, Turner Motorsport strongly recommends professional installation.

This product fits the following BMWs:
2016+ F87 M2

Part #: F87-M2-ROOF-2
Price: $1295.00 (USD) 
Quantity:   
Turner Motorsport Aluminum Skid Plate - E9x M3

Damaged belly pan? We've been there. Every "thunk" or "scrape" against the factory underbody is cringeworthy. Fear not, M3 owners. At long last, our engineers have boldly addressed an Achilles' heel of this performance beast: the belly pan. The lowest point of the car, the OE belly pan ends up being an easy target for curb stops, inclines, and road (or track) debris. The fiber material used in construction of the factory piece make it lightweight, but at the cost of very limited durability. With delicate engine components being mere inches away (including the oil cooler), our heavy duty skid plate should be on every M3 owner's install list.

After much evaluation and testing, our engineers have designed an especially strong, attractive skid plate while retaining the complex aero features found on the OE belly pan. The center pan is manufactured from 3/16” 5052 aluminum and is connected directly to the frame rails via 1018 steel brackets and a fully-reversible, proprietary fastener system for maximum rigidity. Our design features beefy 1/8" thick aluminum side plates that are perfectly integrated with all factory fender liner mounting locations for a factory fit. With ducting mimicking that of the factory pan, you'll experience factory cooling and aerodynamics, and are even able to re-use your OE rubber ducting trim. 

They say the best offense is a good defense - with that in mind, our skid plate offers improved ground clearance to avoid costly, cringe-worthy, and dangerous impacts in the first place. Despite this, you still make contact? Rest assured, this skid plate is designed for severe duty usage. 

All components are protected using wrinkle black powder coat finish to maintain a sleek appearance and protect against corrosion. Includes new stainless steel hardware.

Installation instruction PDF

Features:

  • 3/16” thick aluminum main plate and 1/8” thick aluminum side plates
  • 1018 powder coated steel tube support braces for maximum skid plate strength
  • Retains factory air duct for oil cooler
  • Maintains wheel liner mounting positions
  • Contains all necessary stainless mounting hardware and components
  • No modification necessary; easy to convert back to stock
  • Made in America!

This performance upgrade is for the following BMWs:
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible

Part #: 021807TMS03
Price: $539.96 (USD) 
$599.95 (Sale - Save 10%)
Free Shipping Free Shipping
Quantity:   
Standard Hood Vent Set - E36

These hood vents measure 16" long and 7" wide - the Standard Hood Vents are meant for keeping your NA motor cool during spirited driving or on the track. 

Features:

  • Black powder coated aluminum
  • Vents ship flat, allowing each piece to be hand bent to fit your mounting area
  • Includes all required hardware

Based in Baton Rouge, Louisiana, MKAH Motorsports custom designs unique solutions to solve issues that come along with saving weight in your BMW. All parts are precision cut to ensure parts integrate seamlessly in your vehicle - saving you weight while making your car stand out from the crowd.

This product fits the following BMWs:
1992-1999 E36 318i 318is 318ti 320i 323i 325i 325is 328i 328is M3

Part #: MKAH-E36-SHV-SET
Price: $329.00 (USD) 
Quantity:   
HARD Motorsport Fender Flares V1 -- BMW E36 Coupe

The V1 fender flares from HARD Motorsport allow you to run run wider tires and spacers that help improve handling at track days and autocross sections. Matching the E46 330 Fender Style, this full kit adds an aggressive look to your E36 while still keeping a relatively factory appearance. Because of this, all original M3 moldings are still able to be used to maintain this look. 

The fender flares are easily installed with pop-rivets and are made from plastic instead of fiberglass, keeping them less likely to have cracking and splitting from normal wear and tear.

Allows fitment of up to 275/35/18 rubber on 18x9.5 ET35 wheels on both the front and rear of your E36. Other combinations are possible but may require slight adjustment for optimal fitment.

 

Product fits the following vehicles:

E36 BMW M3 (And all other e36 coupes with M mouldings)

Part #: FLARES.E36.2D
Price: $399.99 (USD) 
Free Shipping Free Shipping
Quantity:   
Seibon M3 style carbon fiber hood - E82 1 series

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2004 - 2013 E82 1 Series Coupe 128i 135i 135is 1M Coupe

Part #: HD0809BMWE822D-B
Price: $901.00 (USD) 
Quantity:   
Race Skids Heavy Duty Skid Plate - E30 M3

BMWs, just like many other makes, only include plastic under-body shields and are often vulnerable on the underside of the engine bay to debris in the road, track, and off road rally courses. When the vehicles are lowered, they also become vulnerable to damage when bottoming out on high spots in the road, drive ways, and other business entrances. This can pose a serious problem if the oil pan and other sensitive components are damaged when this happens. Cracks in the oil pan could result in a destroyed motor if the oil is allowed to completely leak out and any number of bushings, steering components, or exposed fluid lines could easily be ripped out of place, compromising the safety and control of the vehicle.

To prevent this, Race Skids provides a range of Heavy Duty Skid Plates for many classic BMW models. Constructed from heavy duty 10-gauge steel, these skid plates provide a much needed upgrade to under-body protection, helping to absorb the the impact of debris or the road itself to the bottom of the vehicle. This helps ensure that the oil pan and other components are left completely intact, keeping you on the road with no worries.

An added benefit of these Heavy Duty Skid Plates is a black powder coated surface. This protects the plate itself from oxidation and corrosion, gives the plate a smooth scratch resistant surface, and makes it much easier to clean and maintain, allowing you to simply spray or wipe away built up dirt, salt, or any other build up.

Included with the Skid Plate is all needed mounting hardware. These too are corrosion resistant to allow for easy installation and removal of the skid plate for needed maintenance to the vehicle.

Fits the following Chassis:
E30 BMW M3

Fits the following Motor:
S14

Want to install it yourself? Check out the Installation PDF

Part #: RSE30S14
Price: $204.95 (USD) 
Quantity:   
Seibon dual vented carbon fiber hood - F22 2 series

 Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2012-2017 BMW F22  228i 228iX 230i 230iX M235i M235iX M240 M240iX

Part #: HD11BMWF20-DV
Price: $1020.00 (USD) 
Quantity:   
1x1 Weave Carbon Fiber Roof - E90 M3

Adding a carbon fiber roof saves you 15kg or more at the highest point of your vehicle - the roof. Not only does a full carbon fiber roof give your vehicle the signature BMW ///M look, but it also gives your vehicle a lower center of gravity.

Turner Motorsport highly recommends professional installation - installation requires removal of factory roof. 

Part #: E90CFROOF-1
Price: $1498.00 (USD) 
Quantity:   
Seibon OE style carbon fiber hood - E92 3 series

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2009-2013 BMW E92 328i 328xi 335i 335xi 

Part #: HD1112BMWE922D-O
Price: $820.00 (USD) 
Quantity:   
F22 M235iR Conversion Parts

The M235iR is the hottest factory-built racecar since the M3 GT4 in 2009. The M235iR is a proper racecar - race-tuned coil over suspension, big brakes, super-wide tires, fender flares, full cage, fuel cell, etc. BMW makes this car available for privateer racers in Europe and Turner Motorsport is the first US race team to prep them for compeition here. Many of the special Motorsport parts found on the M235iR can be used to build your own F22 228 and M235i race car. Below we have highlighted some of the parts you can use to upgrade your 228/M235 to Racing spec. Stay tuned as we add more M235iR parts to this page every week!

M235iR Fender Flares
Probably the most distinctive visual cue to the M235iR's purpose are it's fender flares and wheel arch extensions. These flares add 9 inches to the front body width and 7.5 inches in the rear. Not only does the R look mean and purposeful, but the flares allow you to run a proper 18x10.0" race wheel (we used BBS or Apex wheels). These flares are made from a composite material and fit to the existing body panels using adhesive and hardware. Trimming of the stock fender lips is required so wider wheels don't rub on the old lips. The M235iR flare will need minor trimming to allow access to the stock fuel filler door. Both front and rear flares are contoured to meet the factory BMW M Sport front and rear bumpers. We sell the flares on their own or as a complete package with matching wheel well liners and install hardware. These fender flares are for racing use only (not for use on road vehicles).

BBS Motorsport 18x10" Wheel Set
One of the biggest issues with racing or tracking the F22 chassis is the lack of wheel clearance. The stock bodywork does not allow wheels that are wide enough for serious track rubber. But with the M235iR widebody kit installed, you can run a proper non-staggered wheel set. The M235iR uses BBS Motorsport R1C 18x10.0" ET24 light alloy wheels at all four corners. Not only is there more rubber to put power to the pavement (the race car uses 265/660R-18 racing slicks), but more tire in the front helps minimize understeer and improve turn-in grip. The same wheel size also allows you to rotate tires for better tire life. For the F22, these wheels fit only under the Motorsport fender flares (or similar).

M Performance Side Skirt Set
These blades extend the side skirts on the F22 body to smooth out airflow. The stock side skirt has a rounded profile that introduces turbulent air. These slim extensions allow the underbody air to exit smoother and faster. They also help to reduce turbulent airflow between the wheels, not just underneath the car. The benefits are seen at track and racing speeds, or in the wind tunnel. At lower speeds their main benefit is aesthetic, altering the appearance and giving the effect of a lowered stance without changing the suspension. Each piece comes as a satin black finish but can be painted to match body color.

M Performance Splitter and Diffusor and Trim Set
In addition to the standard M235i M-Sport front bumper, the Racing model uses all of the M Performance trim - front splitter, rear diffusor, rear trunklid lip spoiler (Evo rear wing also available), gloss black kidney grilles, and carbon fiber mirror covers. The M Performance spoilers and diffuser have been designed together to move air efficiently around the body, direct air to the oil coolers in the front bumper, reduce aerodynamic lift and add downforce at high speeds. The M-Sport front and rear bumpers are required (standard on the M235i). Trim pieces like the grilles and mirror covers just look racy and purposeful.

OMP HTE-R Racing Seat
The OMP HTE-R is a HANS-compatible, lightweight, FIA-approved racing seat available as either a fiberglass or carbon fiber shell (carbon was used on the M235iR seat). The halo design and extra-tall side bolsters combine for outstanding side protection and lateral enforcement. BMW has the complete seat assembly available with sliders, reinforced side mounts, and floor adapters made for the F22 chassis. Racing seats and mounts are for track and racing use only.

M Performance Steering Wheel with Display
This factory BMW steering wheel features a data information display at top center and escalating LED shift lights in the upper steering wheel rim. The driver information display shows oil and water temps, gear selection, RPM, lap time stopwatch, sector times, maximum speed, lateral and longitudal g loads. Hidden buttons in the wheel rim cycle through the modes and screens. Enjoy the feel of the contoured rim wrapped in alcantara. Alcantara is less slippery than leather, especially with leather gloves. All other trim and steering wheel functions are carried over from your stock wheel, with the exception of the steering wheel heater feature (this will be disabled) and the airbag (you will need to source a M-Sport airbag). This wheel is like having a data engineer in the car with you!

KW M235iR Racing Coil Over Set
No race car can be complete without a set of racing coil overs. BMW Motorsport turned to KW Automotive to develop a set of adjustable racing dampers especially for the M235iR. These are coil over shocks and springs in the front and rear, with threaded aluminum bodies for adjustable ride height and corner balancing. The springs are H&R 60mm race with tender springs. KW supplies adjustable front camber plates and a fixed rear mount for the eye-style rear shocks. The adjustability allows you to fine-tune the handling and ride height for a variety of tracks. This coil over set includes a set of springs matching the base M235iR setup. Note: rear coil overs should only be installed with a roll cage reinforcing the rear shock towers. For a mixed-use street-to-track setup, the KW Clubsport may be a better option. Click here for the F22 Clubsport kit.

BMW Motorsport M235iR Monoball Control Arms
Rubber has no place on a race car (except for tires, of course). Rubber suspension bushings are one of the first things to get swapped out for our race cars. The more solid the better when it comes to controlling the alignment and keeping your race setup consistent. We use as much solid material as the rules allow. With no deflection, solid bushings also give amazing feedback to the driver. For the M235iR, BMW had two specs for the rear control arms - stock stamped steel control arms with a rubber/neoprene bushing that is slightly stiffer than stock (2014-2015 spec) and a aluminum/stainless steel set with solid Heim-jointed ends (2016 spec). An additional benefit to the Heim joints is the arms are adjustable so the alignment can be perfectly dialed in. The front control arms use M3/M4 thrust arms and wishbones with sealed monoball joints. Full solid mounts and bushings will give you many setup options with razor sharp steering and chassis response. Note: 2016-spec rear control arms do not have a spring perch like the factory arms. These are for rear coil over shocks only.

H&R Front/Rear Adjustable Sway Bars and Links
The M235i Racing uses larger front and rear sway bars to limit body roll and weight transfer. Bigger bars mean more resistance to bending so it resists bodyroll better. These bars are made by H&R with high-tensile steel and special urethane/Teflon bushings. The front sway bar is adjustable to fine-tune understeer and handling. Adjustable front and rear sway bar links are also adjustable. Adjustable links remove preload in the bar for reliable and consistent performance.

M235iR Engine and Transmission Mounts
This kit from BMW Motorsport stiffens the engine and transmission mounts so they will not wear or fail prematurely on the race track. Rubber mounts are great for street use where they soak up vibration and harshness. But the rubber quickly loses its strength under racing conditions. BMW Motorsport has developed this stiffening package consisting of a solid insert for the stock motor mounts and new solid transmission mounts. The insert is a solid material that reinforces and stiffens the stock engine mount. Although new engine mounts are recommended they are not required if you have low mileage rubber mounts in good condition. The transmission mounts are direct replacements made from solid aluminum. The transmission mounts work on manual and automatic transmission models. Because these are solid mounts they are not street-friendly and more noise and vibration will reach the cabin.

M235iR Evo Rear Wing
For 2016 BMW Motorsport introduced a new rear wing upgrade. This Evolution wing has 3 position to adjust rake and downforce. The center wing span is made from carbon fiber with aluminum supports. You can run this wing with or withou the M Performance rear lip spoiler. The trunklid must be reinforced from the underside to properly support the downforce from this wing. BMW sells a reinforced trunklid that is also ready to accept the hardware for the wing supports. Not only is this a proven and functional upgrade for the M235i race cars but it looks really good too.

M235iR Limited Slip Differential
How do you put all that N55 power to the ground? A standard open differential and traction control is not up to the task. A M235i needs a proper limited slip diff to handle the kind of power the N55 is capable of. For the M235iR, BMW Motorsport went above and beyond: a special multi-clutch M3 GT4-derived limited slip with stock 3.08 gears was developed. This is not just a re-worked M235i diff. Motorsport borrowed diff technology from the M3 GT4 race car. They also beefed up the output shafts with CV joints and larger diameter shafts (the stock M235i shafts will not fit with this diff). As an alternative we have our own custom performance differential for the M235i. Starting with a stock F22 diff housing, we offer it with multiple limited slip and gear ratio choices. We can also polish the bearing and gear surfaces for lower temps and smoother operation. A sample of our custom diffs are listed below (prices include core charges) or check out our full custom options by clicking the link here. Note: BMW Motorsport also equipped the Racing model with a differential cooler but this would only be necessary for long distance endurance races.

M235iR Brakes
One of the secrets of going fast is to stop quicker! Braking performance is the key to lower and consistent lap times. For the M235iR, BMW Motorsport determined that the stock brakes were good enough for sprint-type races but a more durable setup was desired for endurance races such as the 24 Hours of the Nurburgring. BMW Motorsport partnered with Performance Friction to adapt their Z54 4-piston front calipers and racing discs to the M235i. The pads are extra-thick to minimize long pitstops for brake changes. The rotors are 14.0"/355mm and thicker for longer life and better heat dissipation. They also have an extra-large rotor hat to push the wheels out (similar to a wheel spacer). For this reason, the M235iR brakes cannot be used on a standard F22 without the wider bodywork. As an alternative, we also offer StopTech 6-piston Big Brakes that are a better fit with the stock hubs and wheels (spacers may still be required).

Stay tuned as we add more M235iR parts to this page every week!

Prices subject to change without notice.
Some items may be for racing use only and are not legal for road use.

Part #: F22M235IRPARTS
Price: $2990.00 (USD) 
Free Shipping Free Shipping
Get notified about money saving
specials & deals for your BMW
enter your email address
  • 22 years of BMW Tuning.
  • Award winning service.
  • 10,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook




    • 1-800-280-6966
      Mon-Thur 9am-6pm ET, Fri 9am-5pm ET

      • © TurnerMotorsport.com 1993-2017. All Rights Reserved.