click to Chat Live
Contact YouTube Blog Twitter facebook Turner Motorsport on Instagram
1-800-280-6966
 |   Login
  • 0
 |   Login
Shopping Cart (0) Wishlist
Contact

(0) item(s) in your Shopping Cart
Home
Categories
Specials Gifts & Clothing
  1. Genuine BMW Accessories
  2. Genuine BMW Clothing
  3. Turner Shirts Hats and Gear
  4. Gifts under $25
  5. Gifts under $50
  6. Gifts under $100
  7. Gifts over $100
  8. Gift Certificates
  9. Stocking Stuffers
  10. Gift Packages
Brakes
  1. Brake Overhaul Packages
  2. Brake Pads
  3. Brake Pad Sensors
  4. Brake Rotors
  5. StopTech Big Brake Kits
  6. Brembo Big Brake Kits
  7. Stainless Steel Brake Lines
  8. Brake Fluid
  9. Brake Calipers
  10. Caliper Rebuild Kits
  11. Parking Brake Parts
  12. Brake Master Cylinders
  13. ABS/DSC System Parts
  14. Brake Cooling Ducts & Backing Plates
  15. Brake Pads - Brembo GT BBK Calipers
  16. Brake Pads - StopTech BBK Calipers
  17. CATuned Big Brake Kits
  18. Hydraulic Hand Brakes
Car Care & Accessories
  1. Car Covers
  2. Wheel & Tire Cleaning
  3. Wax, Polish and Cleaning Supplies
  4. Detailing Gear
  5. Leather & Plastic Care
  6. Car Cleaning Supplies
  7. Chassis Paint, Coatings, Sealants, and Rust Conversion
Drivetrain
  1. Differential and Gearing Upgrades
  2. Differential Mounts and Upgrades
  3. OEM Clutch Kits & Clutch Parts
  4. Performance Clutch Kits & Parts
  5. Lightweight Aluminum Flywheel Upgrades
  6. Stock OEM Dual Mass Flywheels
  7. Stainless Steel Clutch Lines
  8. Clutch Parts
  9. UUC Short Shift Kits
  10. Axle Shafts
  11. Driveshafts
  12. B&M Short Shifters
  13. Performance Short Shift Kits
  14. UUC DSSR - Double Sheer Selector Rod
  15. Drivershaft Center Support Bearings
  16. Flex Discs & Guibos
  17. Transmission Mounts
  18. Transmission Parts
Engine Chips
  1. Performance Chips, 1986-1995 Models
  2. Shark Injector Performance Software, 1996-2005 Models
  3. Performance Flash Software, 2005+ Models
  4. Sprint Booster Drive-by-Wire Module
  5. Stand-Alone Engine Management
Engine Parts
  1. Engine Performance Packages
  2. Cam Sprockets & Gears
  3. Water Pumps
  4. Thermostats
  5. Radiators & Cooling System Overhaul Kits
  6. Oil Pan Baffles
  7. Radiator Hoses, Cooling Hoses, & Hose Sets
  8. Engine Fans & Fan Clutches
  9. Underdrive Power Pulleys
  10. Camshafts
  11. Schrick Performance Camshafts
  12. E30 M3 S14 Engine Parts
  13. External Engine Parts
  14. Drive Belts & V-Belts
  15. Gaskets, Gasket Sets, Seals, & O-Rings
  16. Factory-Spec Replacement Turbos and Kits
  17. Crankcase Vent, PCV, and Oil Separator Systems
  18. Turbo Upgrades and Kits
  19. Motor Mounts
  20. Electrical Sensors, Switches, & Relays
  21. Ignition Parts
  22. Alternator & Alternator Parts
  23. Starter Motors & Starter Parts
  24. Fuel System Parts
  25. Internal Engine Parts
  26. Cylinder Head Parts & Head Bolts
  27. VANOS Units & Parts
  28. Rod Bearing Kits
  29. Oil Coolers & Oil Cooler Parts
Exhaust
  1. Supersprint Performance Exhaust Systems
  2. Performance Headers & Downpipes
  3. Turner Motorsport Performance Exhaust
  4. Akrapovic Performance Exhaust Systems
  5. Borla Performance Exhaust Systems
  6. Corsa Performance Exhaust Systems
  7. Dinan Free Flow Exhaust Systems
  8. Performance Exhaust Systems
  9. OEM Replacement Mufflers and Exhaust Systems
  10. Exhaust System Upgrades
  11. Exhaust Muffler Tips
  12. Catalytic Converters
  13. Oxygen Sensor - O2 Sensors
  14. Exhaust Gaskets Hangers and Parts
Exterior / Body
  1. Black Grills
  2. Chrome Grills & Trim
  3. Emblems & Decals for Hood, Trunk, and Wheels
  4. Painted Reflectors
  5. Front Spoilers, Bumper Covers, & Air Dams
  6. Rear Spoilers, Rear Wings, & Aprons
  7. Body Trim Parts & Accessories
  8. Carbon Fiber Trunk Lids
  9. Hood & Trunk Shocks, Struts
  10. License Plate Brackets & License Plate Frames
  11. Mirror Kits & Mirror Parts
  12. Window Regulators & Motors
  13. Wiper Blades, Wiper Pumps, & Wiper Motor Parts
  14. Hood Pins and AeroCatch Latches
  15. Racing Tow Hooks and Tow Straps
  16. Aero & Body Kits
Intake
  1. aFe Cold-Air Intake Kits
  2. Turbos & Active Autowerke Superchargers
  3. Dinan Cold Air Intake Kits
  4. Gruppe M Cold-Air Intake Kits
  5. Performance Intake Kits
  6. aFe Performance Air Filters
  7. K&N Performance Air Filters
  8. Replacement Cone Air Filters (for Cold Air Intakes)
  9. Intake Cleaning & Recharging Kits
  10. Intake Manifold Upgrades
  11. Intake Manifold Components (DISA, Vacuum, CCV, Etc)
  12. BOV, Chargepipe, and Intercooler Upgrade Kits
  13. Mass Air Sensor & Air Flow Meters
  14. Intake Boots & Hoses
  15. Throttle Body Parts
  16. Other Intake Kits
Interior
  1. Floor Mats
  2. Gauge Kits and Data Acquisition
  3. Auxiliary Input Adaptors for BMW
  4. Pedal Sets
  5. Escort Radar Detectors
  6. Factory Steering Wheels
  7. Racing Steering Wheels
  8. Shift Knobs, Shift Boots, & Shift Handles
  9. Seats & Seat Accessories
  10. Seat Belts and Racing Harnesses
  11. Cup Holders and Storage
  12. Carbon Fiber Interior Parts
  13. Door Sill Strips
  14. Heating & Air Conditioning
  15. Interior Switches and Switchgear
  16. Sunshades & Windscreens
  17. Interior Trim & Accessories
Lighting
  1. Euro Clear Turn Signals, Parking Lights, & Tail Lights
  2. Turn Signals / Parking Lights
  3. Angel Eye Headlight Conversions
  4. Bulbs for Headlights, Turn Signals and Tail Lights
  5. Headlights, Headlight Lenses, & Headlight Parts
  6. Fog Lights, Fog Light Lenses, & Fog Light Parts
  7. Tail Lights
  8. Stealth Bulbs
Maintenance
  1. Routine Maintenance & Tune-Up Packages
  2. Oil Filters & Oil Filter Kits
  3. Air Filters
  4. Fuel Filters
  5. Cabin Air Filters, Heppa Filters, & Microfilters
  6. Transmission Filter Kits & Transmission Service Parts
  7. Distributor Caps & Rotors
  8. Ignition Coils
  9. Ignition Wires / Spark Plug Wires
  10. Spark Plugs
  11. Bentley Repair / Service Manuals
  12. Service Reset Tools & Fault Code Readers
  13. Anti-Freeze and Coolant
  14. Engine Oils - Genuine BMW and OEM
  15. Power Steering and Hydraulic Fluids
  16. Transmission and Gear Oil - Genuine BMW and OEM
  17. MOTUL Engine Oil and Gear Lubricants
  18. Red Line Oil & Fluids
  19. Liqui-Moly Oil and Additives
Suspension
  1. Shocks & Struts
  2. H&R Performance Springs
  3. Dinan Performance Springs
  4. H&R Cup Kit Shock & Spring Packages
  5. Spring & Shock Packages
  6. Dinan Coilover Spring Kits
  7. Turner / H&R Height Adjustable Spring Sets
  8. Bilstein PSS PSS9 PSS10 Coil Over Suspensions
  9. H&R Coil Over Suspensions
  10. KW Coil Over Suspensions
  11. Moton Coil Overs & Race Shocks
  12. ST Suspension Coilover Kits
  13. Turner Motorsport TrackSport Coil-Over Suspension Kits
  14. Turner Motorsport Racing Suspension Kits
  15. TC Kline Racing Coil Overs
  16. Chassis Reinforcement Kits & Parts
  17. Sway Bar Kits
  18. Sway Bar Links & Sway Bar Parts
  19. Camber / Caster Kits
  20. Strut Braces & Stress Bars
  21. Control Arm Replacements & Upgrades
  22. Suspension Bushings & Mounts
  23. Wheel Bearings & Hub Assemblies
  24. Steering Racks & Power Steering Pumps
  25. Tie Rods & Steering Parts
  26. Coil Over Spring Hardware
  27. CATuned Coilover Kits
  28. AC Schnitzer Suspension Kits
  29. Sachs Performance Coil Over Suspension
  30. AST Suspension
Wheels
  1. Apex Flow Formed Alloy Wheels
  2. Forgeline Custom Forged Alloy Wheels
  3. HRE FlowForm Performance Alloy Wheels
  4. Vorsteiner Wheels
  5. Rohana Wheels
  6. D Force Flow Formed Alloy Wheels
  7. Dinan Performance Wheels
  8. Alpina Alloy Wheels
  9. Original BMW Wheels and Wheel Upgrades
  10. Turner Motorsport Wheel Spacers
  11. ECS Tuning Wheel Spacers
  12. H&R Wheel Spacers
  13. Wheel Bolts, Wheel Studs and Nuts
  14. Wheel Emblems, Caps, and Accessories
  15. High Performance Wheels
Tools
  1. Alignment Tools
  2. Battery Chargers and Tenders
  3. Brake Tools
  4. Clutch Alignment Tools
  5. Coil Over Wrenches
  6. Cooling System Tools
  7. Cylinder Head and VANOS Tools
  8. Exhaust Tools
  9. Fan and Fan Clutch Tools
  10. Fault Code Readers and OBD Scan Tools
  11. Fuel System Tools
  12. Genuine BMW Tool Kits
  13. Oil Service Tools
  14. Sockets
  15. Spark Plug Sockets
  16. Transmission and Differential Tools
  17. Wheel Pin Tools
  18. Workshop Chemicals
Clearance
Choose BMW
BMW 1 Series
  1. (E82) 1-series Coupe 2008+
  2. (E88) 1-series Convertible 2008+
BMW 2 Series
  1. (F22) 2-Series Coupe 2014+
  2. (F23) 2-Series Convertible 2014+
  3. (F87) M2 2016+
BMW 3 Series
  1. (E21) 3-Series 1977-1983
  2. (E30) 3-series 1984-1991
  3. (E30) M3 1988-1991
  4. (E36) 3-series 1992-1999
  5. (E36) M3 1995-1999
  6. (E46) 3-Series 1999-2005
  7. (E46) M3 2001-2006
  8. (E90) 3-Series Sedan 2006-2011
  9. (E90) M3 Sedan 2008-2013
  10. (E91) 3-Series Touring 2006-2013
  11. (E92) 3-Series Coupe 2007-2013
  12. (E92) M3 Coupe 2008-2013
  13. (E93) 3-Series Convertible 2007-2013
  14. (E93) M3 Convertible 2008-2013
  15. (F30) 3-Series Sedan 2012+
  16. (F31) 3-Series Touring 2014+
  17. (F80) M3 2015+
  18. (F34) 3-Series Gran Turismo 2014+
BMW 4 Series
  1. (F32) 4-Series Coupe 2014+
  2. (F33) 4-Series Convertible 2015+
  3. (F34) 4-Series Gran Turismo 2014+
  4. (F82) M4 Coupe 2015+
  5. (F83) M4 Convertible 2015+
  6. (F36) 4-Series Gran Coupe 2015+
BMW 5 Series
  1. (E34) M5 1991-1993
  2. (E39) M5 2000-2003
  3. (E60) M5 2006-2010
  4. (E28) 5-Series 1982-1988
  5. (E34) 5-Series 1989-1995
  6. (E39) 5-Series 1996-2003
  7. (E60) 5-Series Sedan 2004-2010
  8. (E61) 5-Series Touring 2006-2010
  9. (F10) 5-Series 2011+
  10. (G30) 5-Series 2017+
BMW 6 Series
  1. (E24) 6-Series 1977-1989
  2. (E63) 6-Series Coupe 2004-2010
  3. (E64) 6-Series Convertible 2004-2010
  4. (F06) 6-Series Gran Coupe 2013+
  5. (F12) 6-Series Coupe 2011+
  6. (F13) 6-Series Convertible 2011+
BMW 7 Series
  1. (E32) 7-Series 1988-1994
  2. (E38) 7-Series 1995-2001
  3. (E65) 7-Series SWB 2002-2007
  4. (E66) 7-Series LWB 2002-2007
  5. (F01) 7-Series SWB 2009+
  6. (F02) 7-Series LWB 2009+
BMW 8 Series BMW Classics (E9, Bavaria, Isetta, etc)
  1. 2500
  2. 2800
  3. 3.0Si
  4. Bavaria
  5. 2800CS
  6. 3.0CS
  7. 2002
  8. 2002tii
  9. (E12) 528i 1977-1981
  10. (E12) 530i 1975-1978
BMW X Series (SAV)
  1. (E84) X1 Series 2013+
  2. (E83) X3 2004-2010
  3. (F25) X3 2011+
  4. (F26) X4 2015+
  5. (E53) X5 2000-2006
  6. (E70) X5 2007-2013
  7. (F15) X5 2014+
  8. (F85) X5 M 2015+
  9. (E71) X6 2008+
  10. (F16) X6 2015+
  11. (F86) X6 M 2015+
  12. (F48) X1 2016+
  13. (F48) X1 (2016+)
BMW Z Series
  1. (E36/7) Z3 1997-2002
  2. (E85) Z4 M Roadster
  3. (E85/E86/E89) Z4 2003+
  4. (E86) Z4 M Coupe
  5. (E52) Z8 2000-2003
BMW 1600-2002 / tii BMW i Series
  1. (I01) BMW i3 2014+
  2. (I12) BMW i8 2014+
MINI Cooper and Cooper S
Racing
Racing Home Racing News Racing Schedule Racing Photo Gallery
Gallery
Photo Gallery Wallpaper Project Cars
  1. Project i8
  2. Project F80 M3
  3. Turner F82 M4
  4. Turner X5 M
  5. Turner F22 2 Series
  6. Turner F13 M6
  7. Turner F10 M5
  8. Turner F30 335i
  9. Turner E9X M3
  10. Turner E92 335i
  11. Turner E82 1 Series
  12. Turner ActiveE (100% Electric)
  13. Turner E46 M3
  14. Turner E46 330i ZHP
  15. Turner E36 M3
  16. Turner E30 M3
  17. Turner MINI Cooper S
  18. McLaren F1
  19. Turner E92 M3 Lime Rock
  20. Turner F80 M3 Silverstone
Video Gallery
Projects
Turner BMW i8 Turner BMW F80 M3 Turner BMW F82 M4 Turner BMW X5 M Turner BMW F22 2 Series Turner BMW F13 M6 Turner BMW F10 M5 Turner BMW F30 335i Turner BMW E9X M3 Turner BMW E92 335i Turner BMW E82 1 Series Turner BMW ActiveE (100% Electric) Turner BMW E46 M3 Turner BMW E46 330i ZHP Turner BMW E36 M3 Turner BMW E30 M3 Turner MINI Cooper S McLaren F1 Turner BMW E92 M3 Lime Rock Turner BMW F80 M3 Silverstone
About Us
About Turner Motorsport Customer Feedback The Turner Team
  1. Open Positions
Returns Policy Shipping Info Contact Us Privacy Policy Security Policy FAQs

BMW Performance Exhaust Systems

BMW Performance Exhaust Systems BMW Performance exhaust systems are tuned by in-house BMW engineers to subtly enhance the sound and performance of your BMW. They have engineered these systems to fit perfectly, sound beautiful, utilize advanced materials, and blend with the styling of your car. BMW Performance exhausts are not too loud - focusing on enhancing the sound rather than blaring it. By opening up the exhaust and removing restrictions, the engine can work less to move the exhaust gasses through the system. This means a bit more power in addition to that sexy growl they produce.
For accurate results, specify your model below.
AC Schnitzer Sport Rear Silencer - Stainless - F85 F86

The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This exhaust also features an exhaust gas flap, for precision sound control. This flap ensures the proper exhaust gas temperature and sound throughout the RPM range. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included. 

This item fits the following BMWs: 
2015+ F85 BMW X5
2015+ F86 BMW X6

AC Schnitzer
Part #: 1812286712
Price: $4495.00 (USD) 
Direct Ship
Quantity:   
F13 M6, F06 M6 Gran Coupe BMW Competition Package Exhaust Upgrade The Competition Package Exhaust for the M5/M6 consists of new rear mufflers and gloss black tips that add a dose of adrenaline to the audio experience. The difference is very noticeable and absolutely reinforces the M car character that the stock exhaust is lacking. The Comp Package exhaust has a lot of the same sounds as other M6 performance mufflers - it pops and burbles and growls but is still a refined sound. It's just as you would expect from BMW's Motorsport engineers. This might be the best solution for owners looking for a more aggressive sound but don't want the loudest exhaust on the block.

We sell this as a complete exhaust upgrade - everything you need to change over to the M6 Comp Package mufflers. BMW engineered the mufflers to be replaceable. That makes this install very simple and can be done with the rest of the exhaust still attached to the car. And the swap is not permanent; you can revert back to the stock exhaust at any time. Install time should be about one hour.

Included with our Comp Package exhaust upgrade:
  • Left Competition Package Muffler (BMW p/n 18307849760)
  • Right Competition Package Muffler (BMW p/n 18307849761)
  • Competition Package polished tips, set of 4 (BMW p/n 18307849341)
  • 80mm slip-on connecting pipes (BMW p/n 18307560815 x 2) Acousti/Seal compound recommended (not included, add from the options below).

    This item fits the following BMWs:
    2012+ F12 F13 BMW M6
    2012+ F06 BMW M6 Gran Coupe
  • Genuine BMW
    Part #: TMS193570
    Price: $2872.88 (USD) 
    Ships on Jan 5, 2018
    Quantity:   
    AC Schnitzer Sport Rear Silencer - Black - F8X M3

    The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

    This item fits the following BMWs: 
    2016+ F8X BMW M3

    AC Schnitzer
    Part #: 18122825329
    Price: $3795.00 (USD) 
    Direct Ship
    Quantity:   
    AFE Mach Force XP Cat Back Exhaust - E46 M3 2001-2006 with Polished Tips The MACH Force XP exhaust system for the BMW E46 M3 produced 14 horsepower and 13 lbs. x ft. of torque. This exhaust system is constructed from TIG-welded, 2.5" mandrel bent 304 stainless steel and uses dual, high flow transverse mufflers. Also included is an X-Pipe balance tube which equalizes and evenly distributes exhaust pulses for increased flow and performance across the power band while maintaining a great tone. To finish off this system are four aFe laser etched, 3" slash cut polished 304 stainless steel tips. This exhaust uses all factory hanger locations for a hassle free installation. No modifications necessary. 

    All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

    X-Pipe Balance Tube:
    An X-pipe balance tube is used to equalize and evenly distribute exhaust pulses which minimizes exhaust drone and increases flow and performance.

    Simple Installation:
    All systems use factory mounting locations providing stability and hassle-free installation.

    Leak-Free Seal:
    High quality OE style flanges and band clamps are used for a complete 360 degree sealing surface.

    Aggressive Sound:
    Free-flowing dual transverse mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.The MACH Force XP exhaust system for the BMW E46 M3 produced 14 horsepower and 13 lbs. x ft. of torque. This exhaust system is constructed from TIG-welded, 2.5" mandrel bent 304 stainless steel and uses dual, high flow transverse mufflers. Also included is an X-Pipe balance tube which equalizes and evenly distributes exhaust pulses for increased flow and performance across the power band while maintaining a great tone. To finish off this system are four aFe laser etched, 3" slash cut polished 304 stainless steel tips. This exhaust uses all factory hanger locations for a hassle free installation. No modifications necessary. 

    All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

    X-Pipe Balance Tube:
    An X-pipe balance tube is used to equalize and evenly distribute exhaust pulses which minimizes exhaust drone and increases flow and performance.

    Simple Installation:
    All systems use factory mounting locations providing stability and hassle-free installation.

    Leak-Free Seal:
    High quality OE style flanges and band clamps are used for a complete 360 degree sealing surface.

    Aggressive Sound:
    Free-flowing dual transverse mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.
    AFE
    Part #: 49-36314
    Price: $1349.10 (USD) 
    $1499.00 (Sale - Save 10%)
    Direct Ship
    Quantity:   
    AC Schnitzer Sport Rear Silencer - Stainless - F3X 340 440

    The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

    This item fits the following BMWs: 
    2016+ F30 BMW 340i, 340i xDrive 
    2016+ F32 BMW 440i, 440i xDrive

    2016+ F36 BMW 440i, 440i xDrive

    AC Schnitzer
    Part #: 1812230437
    Price: $2495.00 (USD) 
    Direct Ship
    Quantity:   
    AFE Exhaust - Axle-Back - F30 335i with Black Tips

    Features:

    • In house testing produced a max gain of +4 horsepower and +5 ft. lbs. of torque verified by our in house dyno
    • Constructed from 100% Hand TIG-welded, brushed finish, mandrel-bent, 304 stainless steel
    • Utilizes 2-1/2" tubing tubing for maximum flow
    • Includes dual aFe laser etched, 3.5" gloss black 304 stainless steel tips
    • Dual free-flowing transverse mufflers are used to absorb high pitch tones producing a powerful sound
    • Aggressive sound when shifting with NO DRONE!

      Introducing the new aFe Power MACH Force XP Axle-back exhaust system for the 12-15 BMW 335i F30 with the N55 turbo engine. In recent testing, this system produced +4 horsepower and +5 lbs. x ft. of torque. The system was designed and engineered with the perfect tube diameter and lengths, ultimately maximizing performance across the power band while maintaining a great tone with an aggressive sound during shifting. Countless hours of R&D was used to ensure the perfect decibel level without compromising performance with NO DRONE! To finish off this exhaust are dual, aFe laser etched, 3.5" gloss black 304 stainless steel tips. This exhaust uses all factory hanger locations. 

      True Mitered Merge Collector:
      Eliminates dead space that can cause turbulence and hinder flow that formed collectors are prone to produce.

      Aggressive Sound:
      This system includes dual free-flowing transverse mufflers to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

      304 Stainless Steel Tubing:
      High grade stainless tubing with a uniform brushed finish provides a beautiful look and high resistance to corrosion.

      Mandrel Bent Tubing: 
      This performance exhaust is constructed of 2-1/2" mandrel bent, 304 stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower and torque.

      Simple Installation:
      All systems use factory mounting locations providing stability and hassle-free installation.

      Leak-Free Seal:
      High quality band clamps are used for a complete 360 degree sealing surface.

      Also Fits: BMW 435i/ix (F32/33) 13-15 L6-3.0L (t)

      Note: Does not use OEM exhaust valve.

      All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.
    AFE
    Part #: 49-36325-B
    Price: $1259.10 (USD) 
    $1399.00 (Sale - Save 10%)
    Direct Ship
    Quantity:   
    F10 M5 3D Design Sport Mufflers - Quad Tip

    This sport muffler gives your BMW a pleasant performance exhaust note and is the perfect complement to your new 3D Design rear diffuser. It installs in place of the stock muffler and will not impact vehicle emissions equipment, making it an ideal choice for a daily-driven car where looks & performance are a concern. 

    3D Design is focused on high-quality styling components that allow you to personalize the look of your BMW & remain true to the car's original form. Inspired by European tuning trends & Japan's unique VIP tuning style, their wide range of lips, diffusers, side skirts, & spoilers are made from high-quality urethane or super light, super strong prepreg dry carbon and install easily to your factory bumpers & skirts to offer an understated, aggressive performance look.

    3D Design
    Part #: 4101-21014
    Price: $4487.00 (USD) 
    Direct Ship
    Quantity:   
    BMW M Performance Exhaust - F30 328i 2012+, F32 428i This is a factory BMW M Performance exhaust for the 2012+ F30 328i Sedan with N20 4 cylinder turbo engine. This is a factory BMW accessory so it fits great, looks and sounds phenomenal, and is exceptional quality. The sound is mildly more aggressive than the stock exhaust with a slightly more throaty note. This exhaust will waken up the stock 328i personality with a better sound and improved flow. If you feel the stock exhaust is just TOO quiet this is a great option without going overboard. A unique high-tech look is provided by two chrome-plated 80mm exhaust tips which are laser engraved with the ///M logo.This exhaust system includes the rear muffler and exhaust tips. A BMW factory exhaust clamp is included to mount to the factory cat section.

    This item fits the following BMWs:
    2012+ F30 BMW 328i 328xi - Sedan
    2013+ F31 BMW 328i xDrive - Wagon
    2013+ F32 BMW 428i 428i xDrive - Coupe
    Genuine BMW
    Part #: 18302293771
    Price: $1218.27 (USD) 
    Ships in 4 days
    Free Shipping Free Shipping
    AC Schnitzer Racing Evo Silencer System - F3x 340 440

    The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

    This item fits the following BMWs: 
    2016+ F30 BMW 340i 340i xDrive 
    2016+ F32 BMW 440i 440i xDrive

    AC Schnitzer
    Part #: 1812230448
    Price: $2095.00 (USD) 
    Direct Ship
    Quantity:   
    Agency Power Titanium Exhaust System BMW M3 Coupe E92 08-13

    Agency Power has just made the BMW M5 F10 significantly lighter and faster with their complete midpipe and catback titanium exhaust system. Weighing in at only 36lbs for the COMPLETE system less the downpipes, the entire exhaust is made from titanium including the satin color exhaust tips. Welded with sectional cuts, the dual muffler system features 80mm piping throughout and the tips are 102mm. Working with the stock downpipes, the exhaust gives the twin turbo M5 a great rumble while on the throttle but a smooth non droning tone during general cruising. The exhaust helps build an additional 20 horsepower over the stock unit. No check engine lights or issues as this exhaust is a direct bolt on unit.

    This system includes the satin color titanium tips.

    Agency Power
    Part #: AP-E92M3-170T
    Price: $1500.00 (USD) 
    Direct Ship
    Quantity:   
    AFE Exhaust - Cat-Back - E82 135i 2008-2013 with Black Tips This awesome Mach Force XP Cat-back exhaust system produces 11.5 horsepower and 9.5 lbs. x ft. of torque. The Mach Force XP exhaust system is constructed of mandrel bent, polished 304 stainless steel tubing and uses all factory mounting locations for an easy 1hr install time with no cutting or drilling required. This system uses a unique 3" resonance chamber to cancel high frequency sound waves producing an aggressive tone on throttle with a smooth sound at cruising speeds. The elimination of the muffler produces a weight savings of 15lbs. This system is comes with an agressive black 304 stainless steel dual tip to finish off your 135i right.

    All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.
    AFE
    Part #: 49-36302-B
    Price: $625.50 (USD) 
    $695.00 (Sale - Save 10%)
    Direct Ship
    Quantity:   
    American Racing Headers - Complete Exhaust System - E9X M3

    American Racing Headers is a performance exhaust manufacturer that specializes in high flow header systems. They have made a huge name for themselves since their creation in 2005 in the domestic world and are venturing into the Euro scene, now offering premium exhausts for BMW. Made 100% in the USA, located in Deer Park, New York, of 304 stainless steel and hand welded to ensure the best fitment possible, these headers and exhaust systems are perfect for high performance and long term durability. Within just a few years, the were noticed by the "Big-Three" auto giants in the US and were soon the Tier-One supplier of racing headers for the Ford Cobra Jet Mustang, General Motor's Copo Camaro, Chrysler's Drag Pack Challenger, and the Dodge ACR-X Viper.

    Sound Example from American Racing Headers:

    As shown above, their E9X full exhaust system's are perfect for giving your vehicle both a much more aggressive sound and unleashing the potential power of your 4.0L S65 V8.

    The first parts down the line are their signature high flow headers! Using header primaries that are larger than stock and merge collectors that are in-house designed to improve flow as much as possible using a vortex scavenging design, these headers allow a significant improvement in total exhaust flow resulting in higher torque and horsepower numbers throughout the RPM band. The primary tubes come in 2 sizes: 1-5/8" diameter or 1-3/4" diameter. 1-5/8" primaries offer a moderate improvement over stock allowing for less restriction directly at the head and down to the collector. This size will better benefit vehicles that are mostly stock and with a tune and performance intake. 1-3/4" primaries offer a more sizable improvement, allowing for vehicles built much more aggressively to benefit greatly. Vehicles with performance cams, higher performance tunes, and other heavy modifications will be able to efficiently expel exhaust gases thanks to the lower restriction and will be able to see much higher numbers on a dyno and feel a difference on the street or strip. 

    After passing through the manifold, the exhaust gases come to the second component of this performance system, the 3" X-pipe that is available with or without catalytic converters. X-pipes are great for two reasons: More even exhaust flow throughout the power band, thus improving engine efficiency, and an steadier exhaust note that gives off a super-car feel instead of the traditional pulsating that gives your car an old muscle car sound. This helps express the natural sound of the exhaust both at idle and under heavy acceleration. Catalytic converters are the next option to choose from. Building a car for the track only? Cat-less is the answer. Looking to drive your vehicle both on and off the track? The 200-cell high flow catalytic converters keep you both road legal and they are virtually restriction free for continued high flow exhaust. In addition, the x-pipe is built with O2 bungs installed, ready for your sensors to be reinstalled.

    Next in line is the center section with two 3" exhaust pipes available with or without resonators. Some people prefer to eliminate the resonators to get the most aggressive growl out of their exhaust as possible, and others like to keep these in place to help eliminate high RPM drone that can become slightly irritating when driving long distances. More of a personal preference, this just allows for even further exhaust customization.

    Finally are the axle-back sport mufflers, each with dual polished exhaust tips. These round off this high performance system perfectly! Keeping the exhaust's sound from being as obnoxiously loud as a straight-piped system, but still allowing a beautifully mean rumble under idle and a wonderful beast-like roar under heavy acceleration. It expresses the nature of the vehicle perfectly, giving it the sound and power the M3 deserved from the factory.

    Product Features:

    • 100% Made in the USA - Never Outsourced
    • Made entirely of 304 stainless steel 
    • 3/8" thick laser-cut flanges for a warp-free seal
    • 1-5/8" or 1-3/4" exhaust header primaries for higher flow
    • Hand-ported TIG welded inlets
    • Optimized primary tube routing for superior fit and performance
    • Merge collectors complete with internal welded scavenger spikes
    • Catted systems feature 200 cell metallic substrate catalytic converters for extreme durability
    • High flow x-pipe for exhaust flow balance and smoothness.
    • Dual stainless 3" center-section pipes available with or without resonators
    • Dual Sport Mufflers with twin polished exhaust tips
    • Hardware for assembly included

    If you decide to purchase the catless system: This part alters or deletes the emissions equipment on your car. Removing the primary cats will result in a check engine light and faults for the missing cats. Special software or modules will be required to prevent the codes but this setup will not be street legal. This was designed for race and track use only. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.

    This product fits the following vehicles:
    2007-2013 E9X BMW M3

    American Racing Headers
    Part #: ARHE9XM3FS
    Price: $5244.75 (USD) 
    Direct Ship
    AC Schnitzer Sport Rear Silencer - Black - F8X M3

    The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

    This item fits the following BMWs: 
    2014+ F80 BMW M3

    AC Schnitzer
    Part #: 18122825129
    Price: $2895.00 (USD) 
    Direct Ship
    Quantity:   
    BMW M Performance Exhaust - for M Performance Aero / Diffuser - F22 M235i This is a factory BMW M Performance exhaust for the 2014+ F22 M235i. This is a factory BMW accessory so it fits great, looks and sounds phenomenal, and is exceptional quality. The sound is mildly more aggressive than the stock exhaust with a slightly more throaty note. This exhaust will waken up the stock M235i personality with a better sound and improved flow. If you feel the stock exhaust is just TOO quiet this is a great option without going overboard. A unique high-tech look is provided by two either chrome-plated or Carbon fiber 80mm exhaust tips which are laser engraved with the ///M logo.

    This exhaust system includes the rear muffler (18302228673). Please select exhaust tip options below. Chrome - (18302354364) Carbon Fiber (18302355889) . A BMW factory exhaust clamp is included to mount to the factory cat section.

    Only for cars with the factory M Aerodynamics package diffuser!

    This item fits the following BMWs:
    2014+ F22 BMW M235i
    Genuine BMW
    Part #: 18302286673
    Price: $1165.61 (USD) 
    Ships in 4 days
    Free Shipping Free Shipping
    AFE Exhaust - Cat-Back - E92 E93 328i 2007-2013 with Polished Tips Introducing the new aFe Power MACH Force XP cat back exhaust system for the 07-13 BMW 328i E92 & E93 non-turbo. In recent testing, this system produced 4 horsepower and 8 lbs. x ft. of torque. This exhaust is constructed from 2.5" brushed finish, mandrel bent, 304 stainless steel and is TIG-welded. A high flow, 304 stainless steel, single in dual out muffler was used to maximize performance across the power band while maintaining a great tone. To finish off this exhaust are dual, aFe laser etched, 3" polished 304 stainless steel tips. This exhaust uses all factory hanger locations. Note: Cutting is required and should be performed by a skilled technician.

    All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

    Retains Rear Catalytic Converters:
    The rear cats are retained on this system to maintain a smooth, deep sound but more importantly to keep the system street legal.

    Mitered Merge Collector: 
    Mitered collectors decrease turbulence and increase exhaust velocity resulting in increased horsepower, torque and improved throttle response.

    Leak-Free Seal:
    High quality band clamps are used for a complete 360 degree sealing surface.

    Aggressive Sound:
    A 16" free-flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

    Also Fits:
    BMW 328xi/328i xDrive (E92/E93) 07-13 L6-3.0L non-turbo
     
    AFE
    Part #: 49-36313
    Price: $1079.10 (USD) 
    $1199.00 (Sale - Save 10%)
    Direct Ship
    Quantity:   
    Innotech Valvetronic exhaust system - F10 M5

    For car enthusiasts, one of the key aspects to your car is the sound. That being said, in can be very difficult to find the right exhaust that gives you the right note. Sometimes too loud, other times too quiet and just not always what you want. Now, you no longer have to choose between loud or quiet thanks to Innotech Performance (iPE). They have created and exhaust system that gives you the perfect blend of performance and sound while giving you control at your fingertips. 

    Innotech takes pride in becoming an industry leader in the high performance exhaust community. They've reached this feet by specializing in valvetronic exhaust systems. What is valvetronic? Valvetronic is the term for valve-controlled exhaust technology that delivers power and control to the driver’s seat. Operated by a remote control, these systems have 3 different settings: on, off, auto. With the system set to on, the valves are fully open for the best performance and sound. When set to off, the valves close, resulting in significantly reduced sound. The final setting is off, which may be the best option for most. The system detects RPM and fuel pedal signal and adjusts the valve accordingly for the ultimate driving experience. 

    Each part of the exhaust system is individually designed to fit it's application perfectly. The unique designs overcome the limits set by the stock exhaust, so that performance, sound, and driving pleasure can be increased dramatically.

    Kit Includes:

    • Front pipe
    • X-pipe
    • Valvetronic Muffler
    • Quad Polished tips
    • Remote Control Kit
    Innotech
    Part #: BM011
    Price: $5890.00 (USD) 
    $6200.00 (5% off MSRP)
    Direct Ship
    Quantity:   
    Active Autowerke Signature Exhaust Muffler Generation 2 - E9x N52 325 328 330

    Optimal power, performance and sound are the core values of our Active Autowerke BMW 328i exhaust system, designed to fit BMW 325i, 328i, and 330i E9X N52 models. A free-flow design and beefy 80mm dual exhaust tips allow 35% to 40% more exhaust flow than the stock BMW 328i exhaust system.

    The increased flow minimizes back pressure, resulting in substantial HP and torque gains. The system’s  Brushed stainless steel construction also makes a bold visual statement, while also increasing durability.

    Factory-fit specifications are followed closely, yet AA's system allows 14lbs in weight savings as opposed to the factory BMW exhaust.

    This exhaust features the Active Autowerke Muffler and Noise Cancellation Chamber to assist in reducing/eliminating drone. Manufactured from 100% brushed 304 stainless steel, this clamp-on system is suited for the N52 owner looking to bring their BMW's performance to new heights.

    NOTE: This exhaust will only fit the XI (4WD) and Station Wagon Models if purchased with our Mid-Pipe, or welding may be required to join exhaust to stock pipe. Exhaust system requires cutting of the factory pipe for installation.  Dimensions and cutting points are highlighted in the instructions.

    KEY FEATURES:

    • Fits BMW 325i, 328i, 330i
    • Full 304 stainless steel construction with brushed finish
    • 3" Mandrel-bent piping for optimum exhaust flow
    • Straight through muffler design 
    • NCC (Drone Reduction)
    • Dual 80mm Active Autowerke Signature tips, staggered
    • Weight Savings *14lbs lighter than stock BMW exhaust*
    • Designed to use existing factory mounts and hardware 
    • Fully adjustable mounting positions
    • Fully adjustable tips
    • Illustrated instruction manual
    • Two year warranty

    Fits all E9X vehicles with the N52 engine. Requires cutting and welding of the stock system for fitment. Includes instructions for installation process.

    Active Autowerke
    Part #: 11-021
    Price: $599.00 (USD) 
    In Stock
    Quantity:   
    AC Schnitzer Sport Rear Silencer - Black - F30 F32 F36 335 435

    The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

    This item fits the following BMWs: 
    2012+ F30 BMW 335i, 335i xDrive

    2014+ F32 BMW 435i, 435i xDrive

    2014+ F36 BMW 435i, 435i xDrive

    AC Schnitzer
    Part #: 18122303379
    Price: $2495.00 (USD) 
    Direct Ship
    Quantity:   
    Active Autowerke Signature Performance Exhaust - F10 550i

    This rear exhaust system in completely constructed with durable, polished 100% 304 stainless steel for added sturdiness throughout the product. It also features four large, double-walled 90 mm signature stainless steel tips to complete the look of the rear exhaust. This upgrade boasts true performance, added durability, attractive weight advantage and innovative features.

    First, the addition of the Signature Rear Exhaust creates a tone in the car that enthusiasts really love. This muffler spawns a sound that is much more assertive than the stock exhaust system, yet it is still refined. This results in an exhaust tone that is both thrilling and unobtrusive – the perfect combination!

    Next, there is a pretty big difference between the weight of the 550I factory exhaust system and the signature exhaust – a 10 lb. difference to be exact. The weight saved with the Active Autowerke performance system translates to even more gains for your BMW.

    Last, but definitely not least, is the most sought-after benefit of the 550I performance exhaust system – the horsepower gains. On the in-house Active Autowerke Mustang dyno, AA measured gains of 7+ WHP over stock configuration.

    FEATURES:

    • Larger diameter mandrel bent exhaust piping for maximum flow
    • Durable, polished 100% 304 stainless steel
    • Double-walled 90 mm signature stainless steel tips
    • Adjustable tips with embossed Active Autowerke logo on the dual tip mode
    • Improved power & torque throughout entire RPM band
    • Actual dyno measure results with gains of 7+ WHP over stock configuration
    • Fitment for BMW M sport rear diffuse
    • Complete illustrated instruction manual
    • Two year warranty included

    Fits the following vehicles:
    2012+ F10 BMW 550i

    Active Autowerke
    Part #: 11-031
    Price: $1999.00 (USD) 
    Direct Ship
    Quantity:   
    Supersprint
    Part #: 047112
    Price: $314.44 (USD) 
    $419.25 (Sale - Save 25%)
    Ships on Jan 8, 2018
    Free Shipping Free Shipping
    Quantity:   
    AFE Exhaust 2.5in Race Pipe - E92 E93 328i 2007-2013

    Introducing the new aFe Power MACH Force XP Race Pipes for the 07-13 BMW 328i E92 & E93 non-turbo. These exhaust race pipes are constructed from 2.5" brushed finish, mandrel bent, 304 stainless steel and are TIG-welded. While developing this system, we ensured that these aFe race pipes not only increased performance but delivered a powerful and aggressive tone. These race pipes are required to be used with aFe cat-back exhaust system P/N 49-36313.

    Note: This is a "Race Only" product used solely for competition. It's use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization. Any other use including recreational off-road use could be in violation of local, state and federal laws. 

    All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

    OE Style Flanges:
    High quality flanges are used for a perfect OE style fit and hassle free installation.

    100% Hand Tig Welded:
    Welded by a certified craftsman for race proven strength and durability, TIG welding provides the strongest welds reducing stress cracks.

    2.5" Mandrel Bent Tubing:
    Mandrel bent tubing provides smooth, uniform, constant diameter bends that greatly reduce restriction for maximum flow and efficiency.

    This part alters or deletes the emissions equipment on your car, and may not meet emissions standards in all states. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.

    Also Fits:
    BMW 328xi/328i xDrive (E92/E93) 07-13 L6-3.0L non-turbo

    AFE
    Part #: 49-36319KT
    Price: $355.50 (USD) 
    $395.00 (Sale - Save 10%)
    Direct Ship
    Quantity:   
    GruppeM 70mm Titanium Exhaust System  --  BMW E92 E93 M3

    GruppeM designs some of the highest quality intakes and exhaust on the market. Using advanced techniques to get optimized efficiency using specific pipe diameters, they are able to produce an exhaust that not only performs amazingly, but sounds amazing too. Gruppe M's exhaust systems are designed to fit the same as the stock exhaust, eliminating guess-work, allowing for quick and clean fitting systems that require no custom fabrication or assembly. An important detail is their Titanium construction, reducing weight significantly and giving a dry, high-pitch exhaust note that you can't get with standard stainless steel. An added benefit of titanium contruction is that over time heat from the exhaust will change the color of the exhaust system.

    Exhaust Features:

    • Optimized exhaust pipe sizing
    • Ultra-lightweight titanium construction 
    • Racy, high-pitched exhaust note at high revs and heat color gradation
    • Dual 80mm exhaust tips
    • Shot processed stainless steel tail end (made of stainless steel)
    • Value is further enhanced by incorporating the Ram-Air intake system

    This item fits the following BMWs:
    2007-2013 E92 BMW M3
    2007-2013 E93 BMW M3

    Gruppe M
    Part #: EXI-0322
    Price: $4198.50 (USD) 
    $4665.00 (Sale - Save 10%)
    Direct Ship
    Quantity:   
    AC Schnitzer Sport Rear Silencer - Stainless - F30 340

    The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

    This item fits the following BMWs: 
    2014+ F30 BMW 340i, 340i xDrive

    AC Schnitzer
    Part #: 1812230447
    Price: $2095.00 (USD) 
    Direct Ship
    Quantity:   
    AC Schnitzer Sport Rear Silencer - Black - F30 320

    The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

    This item fits the following BMWs: 
    2012 F30 BMW 320i, 320i xDrive

    AC Schnitzer
    Part #: 18122301229
    Price: $1995.00 (USD) 
    Direct Ship
    Quantity:   
    Innotech
    Part #: BM002MB
    Price: $3425.00 (USD) 
    Direct Ship
    Quantity:   
    Active Autowerke Signature Performance Rear Exhaust - F10 M5

    True performance, durability, and attractive weight advantage with innovative features places the Active Autowerke BMW F10 M5 Signature Exhaust in a class of its own. This M5 performance exhaust is unmatched due to the characteristics it consistently conveys. Not only can enthusiasts expect to reach a new level of performance with the installation of Active Autowerke’s F10 M5 signature exhaust system, but they can also anticipate a sleek style and impressive horsepower gains! For drivers looking to get the most out of their performance exhaust, our F10 M5 Signature Exhaust delivers on all fronts.

    The overall performance of the F10 performance Exhaust presents multiple benefits to owners. Not only does it provide a striking new view from the back, it also produces an aggressive yet refined tone and noticeable horsepower gains. Those looking for the ultimate solution to more power, sound and quality from their F10 M5, just found it!

    Active Autowerke's M5 performance exhaust is made from durable, polished 100% 304 stainless steel, and features our double-walled signature stainless steel. The tips are also adjustable, and feature an embossed Active Autowerke logo.

    F10 M5 drivers don’t just want to look good, they also want to sound good! With the addition of our M5 performance exhaust, enthusiasts can expect a much more refined sound. This sophisticated new tone is also much more assertive – giving drivers just what they are after when installing the F10 M5 signature exhaust!

    Arguably the most important benefit of the Active Autowerke M5 performance exhaust is the increase in horsepower. They took the system to their in-house Mustang dyno to see how much extra horsepower the system unleashes. The results were gains of 7+ WHP over stock configuration due to a system constructed for maximum air flow.

    This BMW F10 5-Series exhaust delivers everything we know you would want in a performance exhaust. Eye-catching style, a sophisticated yet aggressive tone, weight savings, and – most importantly – measurable horsepower performance gains.

    Features:

    • Larger diameter mandrel bent piping for maximum flow
    • Durable, polished 100% 304 stainless steel
    • Adjustable Tips with embossed Active Autowerke logo on the dual tip model
    • Improved power & torque throughout entire RPM band
    • Actual dyno measure results with gains of 7+ WHP over stock configuration
    • Fitment for M sport diffuser
    • Complete illustrated instruction manual included
    • Two year warranty included

    Fitment:
     2011+ F10 BMW M5

    Active Autowerke
    Part #: 11-029
    Price: $2295.00 (USD) 
    Direct Ship
    Quantity:   
    Active Autowerke Signature Exhaust - E93 335 (non-xDrive)

    Active Autowerke’s BMW 335i Signature Exhaust system is the leading performance exhaust system currently on the market for E90, E92, and E93 335i models. This powerful and durable system is a true bolt-on, making for easy installation. To ensure longevity, our 335i exhaust is 100% constructed of 304 stainless-steel.

    The Active Autowerke BMW 335i Signature Exhaust for the fifth-generation 3-series boasts dual 90mm tips, and stainless-steel hardware to further add style and performance to your BMW.

    The BMW 335i Signature Exhaust System has been dyno-tested and proven to add an additional 15-22 RWHP, and is a must for the enthusiast looking to unleash more power quickly and easily from their BMW 335i.

    This system increases airflow by more than 35% over stock. It utilizes a true X-pipe design, created to increase the exhaust system’s scavenging affect, which is less restrictive than the H-pipe design employed by most aftermarket exhaust manufacturers. The entire system easily bolts onto either the factory downpipes, or Active Autowerke downpipes:

    The system was created with an anti-flex design and hardware to assure proper fitment at all times. The inlet pipes of the system are larger than OEM, and were created with a high-flow design. This is the only BMW 335i exhaust system currently on the market to feature a bracket that connects the two mufflers together – though the bracket is not visible.

    There is no cutting required, and detailed instructions accompany the exhaust, ensuring owners will feel confident during installation. The entire BMW 335i Signature Exhaust System is constructed from stainless steel, including connecting pipes, X-pipe, and dual rear mufflers. Several adjustments points allow for the addition of rear diffusers.

    KEY FEATURES OF THE ACTIVE AUTOWERKE BMW 335I SIGNATURE EXHAUST SYSTEM:

    • Dyno-proven gains of 17+ RWHP
    • Dual 90mm stainless-steel tips
    • Complete bolt-on (No cutting required)
    • 100% Polished 304 stainless-steel
    • True X-pipe design
    • Anti-flex design & hardware
    • All stainless-steel hardware
    • Large inlet pipes with high-flow design
    • Illustrated instruction manual
    • 2 Year Warranty

    Fits E93 BMW 335 with N54/N55.

    Active Autowerke
    Part #: 11-012
    Price: $1699.00 (USD) 
    Direct Ship
    Quantity:   
    AFE Twisted Steel Downpipe With Cat - F30 335i

    aFe is proud to introduce the aFe Twisted Steel® Down-Pipe with a 400 CPSI high-flow catalytic converter for the 2012-2015 BMW F30 335i with the L6-3.0L (N55) engine. In testing this system resulted in a max gain of 10 horsepower and 16 lbs. x ft. of torque and outflowed the restricted OE catalytic converter by up to 150%. This high performance down-pipe delivers the perfect balance of pure, race-inspired performance, in-cabin driving comfort and the excitement of exhaust sound and tone during normal cruising or aggressive hard throttle. aFe also included a massive, lightweight, 4" diameter, 304 stainless steel tube with a 400 CPSI, high-flow catalytic converter. 

    Tig-Welded: 
    100% TIG-Welded by certified craftsmen for race proven strength and durability. TIG-Welding provides the strongest welds reducing stress cracks.

    High-Flow Catalytic Converter: 
    This system uses a 48 state legal 400 cell per square inch (CPSI) stainless steel high-flow catalytic converter designed for maximum flow and performance.

    Factory O2 Sensor Locations: 
    Factory mounting locations for all O2 sensors.

    Hassle-Free Installation: 
    OE style brackets are included for a hassle-free installation. This unit also comes with a lifetime warranty.

    aFe down pipes are engineered and manufactured in our Corona, California manufacturing facility.

    Note: This is a "Race Only" product used solely for competition. Its use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization. Any other use including recreational off-road use could be in violation of local, state and federal laws.

    This part alters or deletes the emissions equipment on your car, and may not meet emissions standards in all states. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.

    AFE
    Part #: 48-36310KT
    Price: $629.10 (USD) 
    $699.00 (Sale - Save 10%)
    Direct Ship
    Quantity:   
    Active Autowerke Signature Performance Exhaust System - F80/2/3 M3/M4

    The Active Autowerke F8X rear exhaust was carefully engineered to eliminate the unflattering sound of the factory M3 and M4 exhaust, while also allowing for optimum flow and resonance. Every effort was made in addressing the not so appeasing sound of the stock OEM exhaust, but in designing an exhaust worthy for an "M" car. We believe our rear exhaust combined with our mid-pipe offers the deepest sound and best performance of any other system on the market today.  Available for both models, this axle-back exhaust gives your BMW the deep, throaty, growl a car of its caliber should have had from the factory!

    The most noticeable difference between the Active Autowerke F8X Rear Exhaust Section and the BMW factory exhaust is how they utilized the muffler. The design incorporates two mufflers that create a huge resonance chamber to further cancel out the “weed eater” noise.

    This design also allows exhaust gases to crossover freely without being forced in a certain direction - eliminating back pressure without sacrificing that deep, aggressive rumble that some turbocharged cars are known for.

    Note: Active Autowerke GUARANTEES that each and every F8X Rear Exhaust Section will be a precise fit. Every Active Autowerke F8X Rear Exhaust Section is test-fitted on our in-house F8X Exhaust Fixture as part of our quality control measures.

    Features:

    • Made in the USA
    • 18+ WHP gain over stock*
    • 30+ LB-FT gain over stock*
    • Quicker turbo spool
    • Low, Deep Rumble
    • Flex joints to reduce vibration
    • Double-canned muffler to reduce resonance
    • Each exhaust test-fit on our F8X Exhaust Fixture
    • Guaranteed to fit all F80 BMW M3/F82 BMW M4
    • Includes all necessary installation hardware
      *When paired with Active Autowerke F8X Mid-Pipe

    Fits the following vehicles:
    2014+ F8X BMW M3 & M4

    Active Autowerke
    Part #: 11-036
    Price: $1999.00 (USD) 
    Direct Ship
    Quantity:   
    AC Schnitzer Racing Rear Silencer - F30 F32 328 428

    The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

    This item fits the following BMWs: 
    2012+ F30 BMW 328i, 328i xDrive

    2014+ F32 BMW 428i, 428i xDrive

    AC Schnitzer
    Part #: 1812230141
    Price: $1895.00 (USD) 
    Direct Ship
    Quantity:   
    AC Schnitzer Performance Rear Silencer - Stainless - F25 F26

    The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

    This item fits the following BMWs: 
    2016+ F25 BMW X3 sDrive28i, xDrive28i, xDrive28d, xDrive35i
    2016+ F26 BMW X4 xDrive28i, xDrive35i
     

    AC Schnitzer
    Part #: 1812226312
    Price: $1895.00 (USD) 
    Direct Ship
    Quantity:   
    AFE
    Part #: 49-36323-P
    Price: $2249.10 (USD) 
    $2499.00 (Sale - Save 10%)
    Direct Ship
    Quantity:   
    AC Schnitzer Sport Rear Silencer - Stainless - F3X 335 435

    The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

    This item fits the following BMWs: 
    2012+ F30 BMW 335i 335i xDrive 
    2014+ F32 BMW 435i 435i xDrive

    AC Schnitzer
    Part #: 1812230337
    Price: $2495.00 (USD) 
    Direct Ship
    Quantity:   
    AFE
    Part #: 49-36323-C
    Price: $2699.10 (USD) 
    $2999.00 (Sale - Save 10%)
    Direct Ship
    Quantity:   
    AFE Mach Force-Xp Cat-Back Exhaust w/ Polished Tips - F30 340i BMW

    High flow exhaust system directly from aFe, one of the top after market performance manufacturers. This new MACH Force XP exhaust system is for the 2016+ BMW 340i F30 with the new N58 3.0L turbo engine. In recent testing this system produced 14 horsepower and 13 lbs. x ft. of torque. This exhaust system is constructed from 3.0” mandrel bent stainless steel and is hand TIG-welded. The system uses a high flow transverse muffler with 3" diameter tubing which improves performance across the power band while maintaining a great tone. To finish off this exhaust are dual double wall resonated angle cut polished 304 stainless steel tips. The factory actuator drive is retained with the aFe exhaust so that a check engine light does not occur. This exhaust uses all factory hanger locations for a hassle free installation. No modifications necessary.

    Simple Installation:
    All systems use factory mounting locations providing stability and hassle-free installation.

    Leak-Free Seal:
    High quality band clamps are used for a complete 360 degree sealing surface.

    Aggressive Sound:
    A free-flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

    Product Features:

    • +14 HP and +13 lbs. x ft. Torque max gains
    • Constructed from 100% hand TIG-welded, 3" to 2-1/2" mandrel bent, brushed finished 304 stainless steel tubing
    • Includes a factory style exhaust valve
    • Utilizes a unique high flow, transverse muffler with a high-temp powder-coated black finish
    • Includes dual 4" diameter, polished 304 stainless steel tips
    • Factory style V-band flange for a secure leak-free seal
    • Uses all factory hanger locations for a hassle-free installation

     

    Fits the Following BMW's:
    2016+ F30 BMW 340i B58

    AFE
    Part #: 49-36334-P
    Price: $1529.10 (USD) 
    $1699.00 (Sale - Save 10%)
    Direct Ship
    Quantity:   
    AFE Mach Force-Xp Axle-Back Exhaust w/ Polished Tips - F30 340i, F36 440i Gran Coupe

    High flow exhaust system directly from aFe, one of the top after market performance manufacturers. This new MACH Force XP Axle-back exhaust system is for the 2016+ BMW 340i F30 and F36 440i Gran Coupe with the new N58 3.0L turbo engine. This exhaust system is constructed from 3.0” mandrel bent stainless steel and is hand TIG-welded. The system uses a high flow transverse muffler with 3" diameter tubing which improves performance across the power band while maintaining a great tone. To finish off this exhaust are dual double wall resonated angle cut gloss black 304 stainless steel tips. The factory actuator drive is retained with the aFe exhaust so that a check engine light does not occur. This exhaust uses all factory hanger locations for a hassle free installation. No modifications necessary.

    Simple Installation:
    All systems use factory mounting locations providing stability and hassle-free installation.

    Leak-Free Seal:
    High quality band clamps are used for a complete 360 degree sealing surface.

    Aggressive Sound:
    A free-flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

    Product Features:

    • Constructed from 100% hand TIG-welded, 3" to 2-1/2" mandrel bent, brushed finished 304 stainless steel tubing
    • Includes a factory style exhaust valve
    • Utilizes a unique high flow, transverse muffler with a high-temp powder-coated black finish
    • Includes quad 4" diameter, gloss black, 304 stainless steel tips
    • Uses all factory hanger locations for a hassle-free installation

    Fits the Following BMW's:
    2016+ F30 BMW 340i B58
    2017 F36 BMW 440i B58

    AFE
    Part #: 49-36335-P
    Price: $1169.10 (USD) 
    $1299.00 (Sale - Save 10%)
    Direct Ship
    Quantity:   
    Active Autowerke Signature Exhaust Muffler Generation 2 - F22/F30 228i 328i

    The Active Autowerke BMW F30 328I signature exhaust is located in a class all of its own. This product is a must for any enthusiast searching for true performance, added durability and an attractive weight advantage when it comes to the F30 328I performance signature exhaust.

    This system is constructed from 100% polished 304-stainless steel and features adjustable 80 mm double walled tips, making it ideal both for two-door and four-door models (which also allows for cleaner fitment with diffusers).

    This BMW F22/F30 exhaust delivers everything we know you would want in a performance exhaust: eye-catching style, a sophisticated yet aggressive tone, weight savings, and – most importantly – measurable horsepower performance gains!

    This muffler turns your 328I exhaust tone into a sporty but mellow tone that is not only exhilarating but non obtrusive on your ears.

    The factory counterpart weighs 29 lbs. while the Active Autowerke Signature exhaust weighs only a mere 19 lbs. Weight savings are not the only attributes, this 328I performance exhaust has a modular design with its v-band clamps that makes fitment a snap. A revelation in BMW tuning.

    On the in-house Active Autowerke Mustang dyno, their otherwise 100% stock 2013 328I test mule spun the rollers to the tune of an extra 9 RWHP, and 13 LB-FT of torque…from “just” a quality muffler upgrade.

    Turbos love to exhale, and we are very anxious to continue to unearth just how much extra power is hiding in the stock exhaust system.

    FEATURES:

    • Larger diameter mandrel bent piping for maximum flow
    • Durable, polished 100% 304 stainless steel
    • Double-walled 80 mm signature stainless tips
    • Adjustable tips with embossed Active Autowerke logo on the dual tip model
    • Improved power & torque throughout entire RPM band
    • Actual dyno measure results with gains of 10 + WHP over stock configuration
    • Weighs 19 lbs. vs. the factory of 29 lbs.
    • Fitment for coupe, convertible and sedans
    • Complete illustrated instruction manual
    • Two year limited warranty included

    NOTE:

    • Exhaust system requires cutting of the factory pipe for installation. Dimensions and cutting measurements are included in the instructions.

     

    Fits F22/30 BMW 228i and 328i models with the N20 engine.

    Active Autowerke
    Part #: 11-025
    Price: $649.00 (USD) 
    Direct Ship
    Quantity:   
    AC Schnitzer Sport Rear Silencer - Black - F3X 340 440

    The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

    This item fits the following BMWs: 
    2014+ F30 BMW 340i 340i xDrive
    2014+ F32 F36 BMW 440i 440i xDrive - Coupe and Gran Coupe

    AC Schnitzer
    Part #: 18122304379
    Price: $2495.00 (USD) 
    Direct Ship
    Quantity:   
    AC Schnitzer Sport Rear Silencer - F01 F02 740 740Li

    The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

    This item fits the following BMWs: 
    2009+ F01 BMW 740i 

    2009+ F02 BMW 740Li

    AC Schnitzer
    Part #: 1812201510
    Price: $2895.00 (USD) 
    Direct Ship
    Quantity:   
    AC Schnitzer Sport Rear Silencer - Stainless - F30 F32 F36 435

    The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

    This item fits the following BMWs: 
    2012+ F30 BMW 335i, 335i xDrive

    2014+ F32 BMW 435i, 435i xDrive

    2014+ F36 BMW 435i, 435i xDrive

    AC Schnitzer
    Part #: 1812230347
    Price: $2495.00 (USD) 
    Direct Ship
    Quantity:   
    AC Schnitzer
    Part #: 1812287310
    Price: $2495.00 (USD) 
    Direct Ship
    Quantity:   
    AFE Exhaust - Cat-Back - E90 335i 2011-2012 with Polished Tips This performance tuned Mach Force XP cat-back exhaust system produces 11hp and 13lbs. x ft. of torque for your BMW 335i N55. This exhaust system is constructed from 2.75" mandrel bent, high polished 304 stainless steel for corrosion resistance and an aggressive look. The system also comes with dual high flow resonators and dual 3.5" polished 304 stainless steel tips and mufflers to build a mellow, yet powerful sound.

    All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

    Leak-Free Seal:
    High quality band clamps and OE style flanges are used for a complete 360 degree sealing surface.

    Aggressive Sound:
    Dual free-flowing mufflers and resonators are used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

    3.5" Polished Tips:
    This system uses massive 3.5" polished 304 stainless steel tips for an aggressive look.
    AFE
    Part #: 49-36306
    Price: $1345.50 (USD) 
    $1495.00 (Sale - Save 10%)
    In Stock
    Quantity:   
    AC Schnitzer Sport Rear Silencer - Black - F85 F86

    The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This exhaust also features an exhaust gas flap, for precision sound control. This flap ensures the proper exhaust gas temperature and sound throughout the RPM range. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included. 

    This item fits the following BMWs: 
    2015+ F85 BMW X5
    2015+ F86 BMW X6

    AC Schnitzer
    Part #: 18122867129
    Price: $4795.00 (USD) 
    Direct Ship
    Quantity:   
    EVO Valvetronic muffler - E9X M3

    For car enthusiasts, one of the key aspects to your car is the sound. That being said, in can be very difficult to find the right exhaust that gives you the right note. Sometimes too loud, other times too quiet and just not always what you want. Now, you no longer have to choose between loud or quiet thanks to Innotech Performance (iPE). They have created and exhaust system that gives you the perfect blend of performance and sound while giving you control at your fingertips. 

    Innotech takes pride in becoming an industry leader in the high performance exhaust community. They've reached this feet by specializing in valvetronic exhaust systems. What is valvetronic? Valvetronic is the term for valve-controlled exhaust technology that delivers power and control to the driver’s seat. Operated by a remote control, these systems have 3 different settings: on, off, auto. With the system set to on, the valves are fully open for the best performance and sound. When set to off, the valves close, resulting in significantly reduced sound. The final setting is off, which may be the best option for most. The system detects RPM and fuel pedal signal and adjusts the valve accordingly for the ultimate driving experience. 

    Each part of the exhaust system is individually designed to fit it's application perfectly. The unique designs overcome the limits set by the stock exhaust, so that performance, sound, and driving pleasure can be increased dramatically.

    Kit Includes

    • Valvetronic Muffler
    • Quad polished tips
    • Remote control kit
    Innotech
    Part #: BM002
    Price: $2850.00 (USD) 
    $3000.00 (5% off MSRP)
    Direct Ship
    Quantity:   
    F87 M2 BMW M Performance Exhaust System

    The M2 M Performance exhaust is truly impressive! BMW has designed a performance exhaust system for the F87 M2 that makes the lithe M2 sound like a beast! The stainless M Performance exhaust replaces the stock system from the front pipe back and eliminates the center resonator. The sound transforms in Track Mode and is very aggressive and throaty. The rear muffler incorporates two bypass valves (one on each side) so you can choose between a street mode and open track mode. A Bluetooth remote is included to switch between modes (the standard Comfort-Sport-Sport+ settings will no longer control the exhaust valves). Professional installation is recommended as the exhaust flap controller must be connected to the stock wiring harness in the trunk.

    M2 M Performance exhaust includes -

    • M2 M Performance muffler (BMW #18302412432)
    • Bluetooth remote control
    • Titanium (BMW #18302358111) or Carbon Fiber (BMW #18302358110) exhaust tips (additional charge)
    Genuine BMW
    Part #: F87M2-MPERF-EXH
    Price: $2834.05 (USD) 
    $3398.4 (Sale - Save 17%)
    Ships on Jan 5, 2018
    Free Shipping Free Shipping
    F8X M3/M4 AFE Twisted Steel Downpipes with Sport Cats

    aFe offers two downpipe options for the F80 M3/F82 M4 -- a cat-less straight pipe for race use and these tuned downpipes with sport 200cpsi catalytic converters. One of the keys to making power from the twin-turbo S55 is eliminating restrictions like the factory catalytic converters. The M3/M4 has four cats - 2 in the downpipes and 2 in the center section of the exhaust. The aFe cats are much less restrictive than the factory cats, freeing up the exhaust flow and reducing stress on the turbochargers. aFe has measured gains of 21hp and 23ft-lbs of torque. With better flow, the exhaust is a bit louder as well (a common complaint is the stock exhaust is too quiet).

    aFe manufactures these downpipes from 304 stainless steel in their California facility. They are committed to offering a product of superior quality with 3" mandrel-bent tubing, TIG welds, and laser-cut flanges. This M3/M4 DP will mount to the turbos with OE-style v-band clamps and to the stock or aftermarket exhaust system (check out aFe's complete exhaust system here) with OE-style flanges. All O2 sensors fit in factory locations.

    Because of the higher flow of these sport cats, the check engine light and fault code for increased emissions may appear. Special software may be required to eliminate the check engine light.

    Features:

    • In testing this system resulted in gains up to +21 horsepower and +23 lbs. x ft. of torque
    • Includes 200 CPSI, 48-state legal catalytic converters
    • Constructed of 3" mandrel-bent, 304 stainless steel tubing
    • Retains Factory O2 Sensor Locations
    • 100% TIG-Welded
    • Thick flanges to ensure a leak-free seal
    • Includes high quality, O.E. style, V-band turbo flanges

    Note: This system is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.

    This product modifies (but does not remove or defeat) emissions equipment. For this reason this product may not be CARB compliant, and therefore not emissions legal in some states. Consult local laws and regulations in your area. For more information on this product, feel free to contact our sales department.

     

    AFE
    Part #: 48-36312
    Price: $1345.50 (USD) 
    $1495.00 (Sale - Save 10%)
    Direct Ship
    Quantity:   
    AFE
    Part #: 49-36312-C
    Price: $1709.10 (USD) 
    $1899.00 (Sale - Save 10%)
    Direct Ship
    Quantity:   
    Innotech Valvetronic exhaust system - F06 M6 Gran Coupe

    For car enthusiasts, one of the key aspects to your car is the sound. That being said, in can be very difficult to find the right exhaust that gives you the right note. Sometimes too loud, other times too quiet and just not always what you want. Now, you no longer have to choose between loud or quiet thanks to Innotech Performance (iPE). They have created and exhaust system that gives you the perfect blend of performance and sound while giving you control at your fingertips. 

    Innotech takes pride in becoming an industry leader in the high performance exhaust community. They've reached this feet by specializing in valvetronic exhaust systems. What is valvetronic? Valvetronic is the term for valve-controlled exhaust technology that delivers power and control to the driver’s seat. Operated by a remote control, these systems have 3 different settings: on, off, auto. With the system set to on, the valves are fully open for the best performance and sound. When set to off, the valves close, resulting in significantly reduced sound. The final setting is off, which may be the best option for most. The system detects RPM and fuel pedal signal and adjusts the valve accordingly for the ultimate driving experience. 

    Each part of the exhaust system is individually designed to fit it's application perfectly. The unique designs overcome the limits set by the stock exhaust, so that performance, sound, and driving pleasure can be increased dramatically.

    Kit Includes:

    • Front pipe
    • X-pipe
    • Valvetronic Muffler
    • Quad Polished tips
    • Remote Control Kit
    Innotech
    Part #: BM013
    Price: $5890.00 (USD) 
    $6200.00 (5% off MSRP)
    Direct Ship
    Quantity:   
    AFE Exhaust 2.5in Race Pipe - E92 E93 328i 2007-2013 Introducing the new aFe Power MACH Force XP Race Pipes for the 07-13 BMW 328i E92 & E93 non-turbo. These exhaust race pipes are constructed from 2.5" brushed finish, mandrel bent, 304 stainless steel and are TIG-welded. While developing this system, we ensured that these aFe race pipes not only increased performance but delivered a powerful and aggressive tone. These race pipes are required to be used with aFe cat-back exhaust system P/N 49-36313.

    Note: This is a "Race Only" product used solely for competition. It's use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization. Any other use including recreational off-road use could be in violation of local, state and federal laws. 

    All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

    OE Style Flanges:
    High quality flanges are used for a perfect OE style fit and hassle free installation.

    100% Hand Tig Welded:
    Welded by a certified craftsman for race proven strength and durability, TIG welding provides the strongest welds reducing stress cracks.

    2.5" Mandrel Bent Tubing:
    Mandrel bent tubing provides smooth, uniform, constant diameter bends that greatly reduce restriction for maximum flow and efficiency.

    Also Fits:
    BMW 328xi/328i xDrive (E92/E93) 07-13 L6-3.0L non-turbo
    AFE
    Part #: 49-36319
    Price: $359.10 (USD) 
    $399.00 (Sale - Save 10%)
    Direct Ship
    Quantity:   
    BMW M Performance Titanium Exhaust & Tips - F80 M3, F82/F83 M4 This is a factory BMW M Performance titanium exhaust for the 2015+ F80 M3 Sedan and F82 M4 Coupe. Titanium is lighter, stronger and more heat resistant than the factory exhaust system. This system is up to being 40% lighter than the stock stainless steel exhaust. This is a factory BMW accessory so it fits great, looks and sounds phenomenal, and is exceptional quality. The sound is mildly more aggressive than the stock exhaust with a slightly more throaty note. This exhaust will waken up the stock M3 / M4 personality with a better sound and improved flow. If you feel the stock exhaust is just TOO quiet this is a great option without going overboard. Choose Carbon Fiber or Titanium tips below.

    This item fits the following BMWs:
    2015+ F80 BMW M3
    2015+ F82 BMW M4
    Genuine BMW
    Part #: 18302349921
    Price: $4924.28 (USD) 
    Ships in 4 days
    Free Shipping Free Shipping
    AFE Exhaust - Cat-Back - F30 335i with Polished Tips

    Features:

    • In house testing produced a max gain of +4 horsepower and +5 ft. lbs. of torque verified by our in house dyno
    • Constructed from 100% Hand TIG-welded, brushed finish, mandrel-bent, 304 stainless steel
    • Utilizes 3" tubing which merges into 2-1/2" tubing for maximum flow
    • Includes dual aFe laser etched, 3.5" polished 304 stainless steel tips
    • Dual free-flowing transverse mufflers are used to absorb high pitch tones producing a powerful sound
    • Aggressive sound when shifting with NO DRONE!

      Introducing the new aFe Power MACH Force XP cat-back exhaust system for the 12-14 BMW 335i F30 with the N55 turbo engine. In recent testing, this system produced +4 horsepower and +5 lbs. x ft. of torque. The system was designed and engineered with the perfect tube diameter and lengths, ultimately maximizing performance across the power band while maintaining a great tone with an aggressive sound during shifting. Countless hours of R&D was used to ensure the perfect decibel level without compromising performance with NO DRONE! To finish off this exhaust are dual, aFe laser etched, 3.5" polished 304 stainless steel tips. This exhaust uses all factory hanger locations. 

      True Mitered Merge Collector:
      Eliminates dead space that can cause turbulence and hinder flow that formed collectors are prone to produce.

      Aggressive Sound:
      This system includes dual free-flowing transverse mufflers to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

      304 Stainless Steel Tubing:
      High grade stainless tubing with a uniform brushed finish provides a beautiful look and high resistance to corrosion.

      Mandrel Bent Tubing: 
      This performance exhaust is constructed of 3" merging into 2-1/2" mandrel bent, 304 stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower and torque.

      Simple Installation:
      All systems use factory mounting locations providing stability and hassle-free installation.

      Leak-Free Seal:
      High quality band clamps are used for a complete 360 degree sealing surface.

      Also Fits: BMW 435i/ix (F32/33) 13-15 L6-3.0L (t)

      Note: Does not use OEM exhaust valve.

      All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.
    AFE
    Part #: 49-36326-P
    Price: $1349.10 (USD) 
    $1499.00 (Sale - Save 10%)
    Direct Ship
    Quantity:   
    AC Schnitzer Rear Silencer - F30 F32 335 435

    The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

    This item fits the following BMWs: 
    2012+ F30 BMW 335i, 335i xDrive

    2014+ F32 BMW 435i, 435i xDrive

    AC Schnitzer
    Part #: 1812230338
    Price: $2495.00 (USD) 
    Direct Ship
    Quantity:   
    American Racing Headers - Triple-Stepped Complete Exhaust System - E9X M3

    American Racing Headers is a performance exhaust manufacturer that specializes in high flow header systems. They have made a huge name for themselves since their creation in 2005 in the domestic world and are venturing into the Euro scene, now offering premium exhausts for BMW. Made 100% in the USA, located in Deer Park, New York, of 304 stainless steel and hand welded to ensure the best fitment possible, these headers and exhaust systems are perfect for high performance and long term durability. Within just a few years, the were noticed by the "Big-Three" auto giants in the US and were soon the Tier-One supplier of racing headers for the Ford Cobra Jet Mustang, General Motor's Copo Camaro, Chrysler's Drag Pack Challenger, and the Dodge ACR-X Viper.

    Sound Example from American Racing Headers:

    As shown above, their E9X full exhaust system's are perfect for giving your vehicle both a much more aggressive sound and unleashing the potential power of your 4.0L S65 V8.

    The first parts down the line are their signature high flow Triple-Stepped Headers! Using header primaries that are larger than stock that gradually increase in size and merge collectors that are in-house designed to improve flow as much as possible using a vortex scavenging design, these headers allow a significant improvement in total exhaust flow resulting in higher torque and horsepower numbers throughout the RPM band. The primary tubes starts at 1-5/8" diameter then increases to 1-3/4" then finally 1-7/8" before entering the merge collector. This allows the gasses to expand and enter the collector at a higher flow rate, a common source of restriction in exhaust systems. The combined increase air volume flow, perfectly timed and cut to length primary tubes, plus the custom merge collector will make this exhaust possibly the best contender for performance exhausts available. This makes these headers great for entry level M3's all the way up to vehicles with performance cams, higher performance tunes, and other heavy modifications will be able to efficiently expel exhaust gases thanks to the lower restriction and will be able to see much higher numbers on a dyno and feel a difference on the street or strip.

    After passing through the manifold, the exhaust gases come to the second component of this performance system, the 3" X-pipe that is available with or without catalytic converters. X-pipes are great for two reasons: More even exhaust flow throughout the power band, thus improving engine efficiency, and an steadier exhaust note that gives off a super-car feel instead of the traditional pulsating that gives your car an old muscle car sound. This helps express the natural sound of the exhaust both at idle and under heavy acceleration. Catalytic converters are the next option to choose from. Building a car for the track only? Cat-less is the answer. Looking to drive your vehicle both on and off the track? The 200-cell high flow catalytic converters keep you both road legal and they are virtually restriction free for continued high flow exhaust. In addition, the x-pipe is built with O2 bungs installed, ready for your sensors to be reinstalled.

    Next in line is the center section with two 3" exhaust pipes available with or without resonators. Some people prefer to eliminate the resonators to get the most aggressive growl out of their exhaust as possible, and others like to keep these in place to help eliminate high RPM drone that can become slightly irritating when driving long distances. More of a personal preference, this just allows for even further exhaust customization.

    Finally are the optional axle-back sport mufflers, each with dual polished exhaust tips. These round off these high performance system perfectly! Keeping the exhaust's sound from being as obnoxiously loud as a straight-piped system, but still allowing a beautifully mean rumble under idle and a wonderful beast-like roar under heavy acceleration. It expresses the nature of the vehicle perfectly, giving it the sound and power the M3 deserved from the factory. You can choose to keep these performance mufflers or select a system without the paired mufflers to use with another stock or aftermarket exhaust system.

    Product Features:

    • 100% Made in the USA - Never Outsourced
    • Made entirely of 304 stainless steel 
    • 3/8" thick laser-cut flanges for a warp-free seal
    • 1-5/8" to 1-7/8" triple-stepped exhaust header primaries for higher flow
    • Hand-ported TIG welded inlets
    • Optimized primary tube routing for superior fit and performance
    • Merge collectors complete with internal welded scavenger spikes
    • Catted systems feature 200 cell metallic substrate catalytic converters for extreme durability
    • High flow x-pipe for exhaust flow balance and smoothness.
    • Dual stainless 3" center-section pipes available with or without resonators
    • Optional Premium Dual Sport Mufflers with twin polished exhaust tips
    • Hardware for assembly included

    This part alters or deletes the emissions equipment on your car. Removing the primary cats will result in a check engine light and faults for the missing cats. Special software or modules will be required to prevent the codes but this setup will not be street legal. This was designed for race and track use only. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.

    This product fits the following vehicles:
    2007-2013 E9X BMW M3

    American Racing Headers
    Part #: ARHE9XM3TSH
    Price: $6347.26 (USD) 
    Direct Ship
    AC Schnitzer Sport Rear Silencer - Black - F30 340

    The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

    This item fits the following BMWs: 
    2016+ F30 BMW 340i, 340i xDrive

    AC Schnitzer
    Part #: 18122304479
    Price: $2195.00 (USD) 
    Direct Ship
    Quantity:   
    ACtive Autowerke Signature Exhaust Muffler Generation 2 - F3X 335i/xi 435i/xi 2013+

    This system is constructed from 100% Brushed 304-stainless steel and features adjustable Active Autowerke double walled tips, making it ideal both for 2-door and 4-door models.

    Rather than creating a complete exhaust system, Active Autowerke opted for a compact design built in a smaller package to deliver more value to the BMW end user. 

    Just like replacing the BMW factory rear exhaust, the Active Autowerke BMW Performance rear exhaust does it in much the same way, if not better by using a much beefier, heavy duty TORCA style exhaust clamp. TORCA clamps are known for their strength and sealing capabilities to make that tight seal.

    Other cool features like height adjustable mounting tabs also help to make this exhaust very east to install.

    The system is a straight-through design providing substantial improvements to gas flow over the factory exhaust. Gone is the factory flapper to change exhaust tones; this BMW Performance exhaust doesn't need gimmicks to accomplish baritones or suffer from problems like sticking flappers that will happen due to exhaust build up. Instead, the sound come out non intrusive, with a rich mellow tone and delivers a solid 15+hp, with key gains in the mid-range.

    FEATURES:

    • Large mandrel bent piping for maximum flow
    • Durable, Brushed 100% 304 stainless steel for durability 
    • Double-walled Signature Brushed stainless tips
    • Adjustable Tips with Embossed Active Autowerke Logo
    • Improved power & torque throughout entire RPM band
    • Gains of 12-15 HP over stock configuration
    • Tight seal with use of TORCA style exhaust clamps
    • Height adjustable mounting brackets make installation easy  
    • Factory curb weight 27.0 Lbs, Active 435i weighs 22.0 Lbs 
    • Fitment for Coupe, Convertible and Sedans
    • Complete illustrated instruction manual 
    • Two year warranty

    Fits the Following Vehicles:
    2013+ BMW F30 335i, xi
    2013+ BMW F32 435i, xi  
    2013+ BMW F33 435i, xi 
    2013+ BMW F36 435i

    Active Autowerke
    Part #: 11-027
    Price: $849.00 (USD) 
    Direct Ship
    Quantity:   
    Active Autowerke Performance Mid Pipe Generation 2 - E9X N52 325i 328i 330i

    Optimal power, performance and sound are the core values of our Active Autowerke BMW 328i mid pipe, designed to fit BMW 325i, 328i, and 330i E9X N52 models. A free-flow single pipe design allows more exhaust flow than the stock BMW 328i exhaust system.

    The increased flow minimizes back pressure, resulting in substantial HP and torque gains. The system’s  Brushed stainless steel construction also makes a bold visual statement, while also increasing durability. This BMW 328i performance mid pipe produces a sporty, yet mellow tone. 

    This exhaust features the Active Autowerke muffler resonator to assist in reducing/eliminating drone. Manufactured from 100% brushed 304 stainless steel, this clamp-on system is suited for the N52 owner looking to bring their BMW's performance to new heights.

    NOTE: This Mid-Pipe is not an exact fit to the stock rear exhaust, some welding and modification may be needed. Exhaust system requires cutting of the factory pipe for installation.  Dimensions and cutting points are highlighted in the instructions.

    KEY FEATURES:

    • Fits BMW 325i, 328i, 330i
    • Full 304 stainless steel construction with brushed finish
    • 3" Mandrel-bent piping for optimum exhaust flow
    • Straight through muffler design 
    • NCC (Drone Reduction)
    • Dual 80mm Active Autowerke Signature tips, staggered
    • Weight Savings *14lbs lighter than stock BMW exhaust*
    • Designed to use existing factory mounts and hardware 
    • Fully adjustable mounting positions
    • Fully adjustable tips
    • Illustrated instruction manual
    • Two year warranty

    Fits all E9X vehicles with the N52 engine. Requires a certain amount of cutting and welding for exact fitment. Instructions included for installation process.

    Active Autowerke
    Part #: 11-023
    Price: $499.00 (USD) 
    Direct Ship
    Quantity:   
    Innotech Valvetronic exhaust system - E60 M5

    For car enthusiasts, one of the key aspects to your car is the sound. That being said, in can be very difficult to find the right exhaust that gives you the right note. Sometimes too loud, other times too quiet and just not always what you want. Now, you no longer have to choose between loud or quiet thanks to Innotech Performance (iPE). They have created and exhaust system that gives you the perfect blend of performance and sound while giving you control at your fingertips. 

    Innotech takes pride in becoming an industry leader in the high performance exhaust community. They've reached this feet by specializing in valvetronic exhaust systems. What is valvetronic? Valvetronic is the term for valve-controlled exhaust technology that delivers power and control to the driver’s seat. Operated by a remote control, these systems have 3 different settings: on, off, auto. With the system set to on, the valves are fully open for the best performance and sound. When set to off, the valves close, resulting in significantly reduced sound. The final setting is off, which may be the best option for most. The system detects RPM and fuel pedal signal and adjusts the valve accordingly for the ultimate driving experience. 

    Each part of the exhaust system is individually designed to fit it's application perfectly. The unique designs overcome the limits set by the stock exhaust, so that performance, sound, and driving pleasure can be increased dramatically.

    Kit Includes:

    • Front pipe
    • X-pipe
    • Valvetronic Muffler
    • Quad Polished tips
    • Remote Control Kit
    Innotech
    Part #: BM005
    Price: $4037.50 (USD) 
    $4250.00 (5% off MSRP)
    Direct Ship
    Quantity:   
    AFE Exhaust - Cat-Back - F30 328i 2012-2014 N20 with Black Tips This new MACH Force XP exhaust system is for the 2012 to 2015 BMW 328i F30 with the new N20 2.0L turbo engine. In recent testing this system produced 12 horsepower and 17 lbs. x ft. of torque. This exhaust system is constructed from 3.0” mandrel bent stainless steel and is MIG-welded. The system uses a high flow 18" transverse muffler with 3" diameter tubing which improves performance across the power band while maintaining a great tone. To finish off this exhaust are dual double wall resonated angle cut gloss black 304 stainless steel tips. The factory actuator drive is retained with the aFe exhaust so that a check engine light does not occur. This exhaust uses all factory hanger locations for a hassle free installation. No modifications necessary.  Note: Does not fit vehicle with N26 engine. N26 engine is SULEV (super low emission) version of N20

    All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

    Simple Installation:
    All systems use factory mounting locations providing stability and hassle-free installation.

    Leak-Free Seal:
    High quality band clamps are used for a complete 360 degree sealing surface.

    Aggressive Sound:
    A free-flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.
    AFE
    Part #: 49-46310-B
    Price: $1169.10 (USD) 
    $1299.00 (Sale - Save 10%)
    Direct Ship
    Quantity:   
    AC Schnitzer Sport Rear Silencer - Stainless - F30 320

    The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

    This item fits the following BMWs: 
    2014+ F30 BMW 320i, 320i xDrive

    AC Schnitzer
    Part #: 1812230122
    Price: $1895.00 (USD) 
    Direct Ship
    Quantity:   
    AFE
    Part #: 49-36311-C
    Price: $1709.10 (USD) 
    $1899.00 (Sale - Save 10%)
    Direct Ship
    Quantity:   
    Genuine BMW M Performance Muffler - E82 128i, E88 128i - 2008+ The E82 128i BMW Performance exhaust system increases engine output by allowing exhaust gases to exit the vehicle more efficiently. Engine performance is increased by up to 5 horsepower at 6000 RPM, but there's also another benefit. As RPM escalates, so does the exhaust note, creating a racy but never intrusive sound. Replaces BMW part number 18100443577

    This item fits the following BMWs:
    2008+ E82 BMW 128i Coupe
    2008+ E88 BMW 128i Convertible
    Genuine BMW
    Part #: 18102208804
    Price: $773.00 (USD) 
    In Stock
    Quantity:   
    Innotech Valvetronic exhaust system - F12/13 M6

    For car enthusiasts, one of the key aspects to your car is the sound. That being said, in can be very difficult to find the right exhaust that gives you the right note. Sometimes too loud, other times too quiet and just not always what you want. Now, you no longer have to choose between loud or quiet thanks to Innotech Performance (iPE). They have created and exhaust system that gives you the perfect blend of performance and sound while giving you control at your fingertips. 

    Innotech takes pride in becoming an industry leader in the high performance exhaust community. They've reached this feet by specializing in valvetronic exhaust systems. What is valvetronic? Valvetronic is the term for valve-controlled exhaust technology that delivers power and control to the driver’s seat. Operated by a remote control, these systems have 3 different settings: on, off, auto. With the system set to on, the valves are fully open for the best performance and sound. When set to off, the valves close, resulting in significantly reduced sound. The final setting is off, which may be the best option for most. The system detects RPM and fuel pedal signal and adjusts the valve accordingly for the ultimate driving experience. 

    Each part of the exhaust system is individually designed to fit it's application perfectly. The unique designs overcome the limits set by the stock exhaust, so that performance, sound, and driving pleasure can be increased dramatically.

    Kit Includes:

    • Front pipe
    • X-pipe
    • Valvetronic Muffler
    • Quad Polished tips
    • Remote Control Kit
    Innotech
    Part #: BM012
    Price: $5890.00 (USD) 
    Direct Ship
    Quantity:   
    Active Autowerke Signature Performance Valved Exhaust System - F87 M2

    Active Autowerke is proud to announce the release of our Signature M2 Exhaust System.  This system is the result of countless hours of R&D to obtain the perfect combination of performance and sound. Constructed of 100% 304 TIG welded stainless steel, we have created a modular exhaust system that will provide enough flow to support power levels way above the stock M2. 

    When installed as a complete unit, the exhaust diameter of our system never shrinks below 3.5” The rear section splits from a single 3.5” pipe in to dual 3.5” pipes; one of which is valved and leads straight to the exhaust tips with the other leading to a straight through muffler that reduces noise levels when the valve is closed. The Y-pipe is hand built to maintain maximum exhaust velocity throughout the entire system.  

    With the reduced back pressure and large single-pipe design you can expect exhaust velocity to remain as high as possible throughout the entire system. The design is also capable of handling much higher power levels than stock. It’s over engineered to have no issues handling the increased exhaust volume from extensive modifications including turbo upgrades.

    The stock M2 sounds great, but there’s always room for improvement! They configured 7 different muffler and resonator setups before settling on the final product. With the valve closed the system is slightly louder than stock but with a great note. With the valve open it’s significantly louder but without the metallic, hollow sound of a full straight pipe exhaust.

    MADE IN THE USA

    FEATURES:

    • Mandrel bent 304-stainless construction
    • Completely TIG Welded (No MIG Welding at all)
    • Flow efficient Y-Pipe design
    • Perfect fitment with adjustable 90mm double walled tips
    • True 3.5” turbo back design
    • Uses OEM valve motor
    • Designed to be used at stock power levels along with highly modified engines
    • No permanent modifications required
    • Can be used with our 3.5” downpipe or with an adapter to the stock downpipe
    • Manufactured in house at our facility in Miami, FL.
    Active Autowerke
    Part #: 11-042
    Price: $3450.00 (USD) 
    Direct Ship
    Quantity:   
    AFE Exhaust - Cat-Back - F30 335i with Black Tips

    Features:

    • In house testing produced a max gain of +4 horsepower and +5 ft. lbs. of torque verified by our in house dyno
    • Constructed from 100% Hand TIG-welded, brushed finish, mandrel-bent, 304 stainless steel
    • Utilizes 3" tubing which merges into 2-1/2" tubing for maximum flow
    • Includes dual aFe laser etched, 3.5" gloss black 304 stainless steel tips
    • Dual free-flowing transverse mufflers are used to absorb high pitch tones producing a powerful sound
    • Aggressive sound when shifting with NO DRONE!

      Introducing the new aFe Power MACH Force XP cat-back exhaust system for the 12-14 BMW 335i F30 with the N55 turbo engine. In recent testing, this system produced +4 horsepower and +5 lbs. x ft. of torque. The system was designed and engineered with the perfect tube diameter and lengths, ultimately maximizing performance across the power band while maintaining a great tone with an aggressive sound during shifting. Countless hours of R&D was used to ensure the perfect decibel level without compromising performance with NO DRONE! The exhaust is constructed from 3" TIG-welded, brushed finish, mandrel-bent, 304 stainless steel. To finish off this exhaust are dual, aFe laser etched, 3.5" gloss black 304 stainless steel tips. This exhaust uses all factory hanger locations. 

      True Mitered Merge Collector
      Eliminates dead space that can cause turbulence and hinder flow that formed collectors are prone to produce.

      Aggressive Sound:
      This system includes dual free-flowing transverse mufflers to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque while eliminating drone.

      304 Stainless Steel Tubing:
      High grade stainless tubing with a uniform brushed finish provides a beautiful look and high resistance to corrosion.

      Mandrel Bent Tubing: 
      This performance exhaust is constructed of 3" merging into 2-1/2" mandrel bent, 304 stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower and torque.

      Simple Installation:
      All systems use factory mounting locations providing stability and hassle-free installation.

      Leak-Free Seal:
      High quality band clamps are used for a complete 360 degree sealing surface.

      Also Fits: BMW 435i/ix (F32/33) 13-15 L6-3.0L (t)

      Note: Does not use OEM exhaust valve.

      All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.
    AFE
    Part #: 49-36326-B
    Price: $1439.10 (USD) 
    $1599.00 (Sale - Save 10%)
    Direct Ship
    Quantity:   
    AC Schnitzer Sport Rear Silencer - Stainless Steel - F87 M2

    The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

    This item fits the following BMWs: 
    2016+ F87 BMW M2​

    AC Schnitzer
    Part #: 1812287320
    Price: $2095.00 (USD) 
    Direct Ship
    Quantity:   
    (E9x) M3 F1 (Full System Only) Front Test Pipe + X Pipe + Valvetronic Rear Mufflers + Quad Chrome Tips + Remote Contol Kit

    For car enthusiasts, one of the key aspects to your car is the sound. That being said, in can be very difficult to find the right exhaust that gives you the right note. Sometimes too loud, other times too quiet and just not always what you want. Now, you no longer have to choose between loud or quiet thanks to Innotech Performance (iPE). They have created and exhaust system that gives you the perfect blend of performance and sound while giving you control at your fingertips. 

    Innotech takes pride in becoming an industry leader in the high performance exhaust community. They've reached this feet by specializing in valvetronic exhaust systems. What is valvetronic? Valvetronic is the term for valve-controlled exhaust technology that delivers power and control to the driver’s seat. Operated by a remote control, these systems have 3 different settings: on, off, auto. With the system set to on, the valves are fully open for the best performance and sound. When set to off, the valves close, resulting in significantly reduced sound. The final setting is off, which may be the best option for most. The system detects RPM and fuel pedal signal and adjusts the valve accordingly for the ultimate driving experience. 

    Each part of the exhaust system is individually designed to fit it's application perfectly. The unique designs overcome the limits set by the stock exhaust, so that performance, sound, and driving pleasure can be increased dramatically.

    Innotech
    Part #: BM003F1
    Price: $5890.00 (USD) 
    $6200.00 (5% off MSRP)
    Direct Ship
    Quantity:   
    AFE Exhaust - Cat-Back - E9x 335i 07-10 with Polished Tips The Mach Force XP cat-back exhaust system produces 11hp and 10lbs. x ft. of torque for your BMW 335i. This exhaust systems is constructed from 2.75" mandrel bent, 304 hand brushed stainless steel and utilizes a unique crossover pipe that helps to equalize exhaust pressure and tunes the exhaust pulse. The system also comes with dual 3.5" polished 304 stainless steel tips and muffler to build a mellow, yet powerful sound. Note: Cutting is required and should be performed by a skilled technician.

    All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

    Leak-Free Seal:
    High quality band clamps are used for a complete 360 degree sealing surface.

    Aggressive Sound:
    A free-flowing mufflers is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

    Crossover Balance Tube:
    The crossover balance tube equalizes and evenly distributes exhaust pulses traveling through the exhaust system. This not only creates more efficient flow and better performance, it also reduces sound decibels ultimately minimizing exhaust drone.
    AFE
    Part #: 49-36301
    Price: $1394.10 (USD) 
    $1549.00 (Sale - Save 10%)
    Direct Ship
    Quantity:   
    Innotech Valvetronic Exhaust System - F22 M235i

    For car enthusiasts, one of the key aspects to your car is the sound. That being said, in can be very difficult to find the right exhaust that gives you the right note. Sometimes too loud, other times too quiet and just not always what you want. Now, you no longer have to choose between loud or quiet thanks to Innotech Performance (iPE). They have created and exhaust system that gives you the perfect blend of performance and sound while giving you control at your fingertips. 

    Innotech takes pride in becoming an industry leader in the high performance exhaust community. They've reached this feet by specializing in valvetronic exhaust systems. What is valvetronic? Valvetronic is the term for valve-controlled exhaust technology that delivers power and control to the driver’s seat. Operated by a remote control, these systems have 3 different settings: on, off, auto. With the system set to on, the valves are fully open for the best performance and sound. When set to off, the valves close, resulting in significantly reduced sound. The final setting is off, which may be the best option for most. The system detects RPM and fuel pedal signal and adjusts the valve accordingly for the ultimate driving experience. 

    Each part of the exhaust system is individually designed to fit it's application perfectly. The unique designs overcome the limits set by the stock exhaust, so that performance, sound, and driving pleasure can be increased dramatically.

    Kit Includes:

    • Front pipe
    • Mid-pipe
    • Valvetronic Muffler
    • Dual Polished tips
    • Remote Control Kit
    Innotech
    Part #: BM028
    Price: $3040.00 (USD) 
    $3200.00 (5% off MSRP)
    Direct Ship
    Quantity:   
    AFE Twisted Steel Headers - E9x 325i 328i 330i 2006-2013, E82 128i

    aFe Power’s new “Race Only” Twisted Steel Headers deliver an astounding 16hp and 18lbs. x ft. torque while outflowing the factory exhaust manifolds. The headers are constructed of near equal length 1.5” 16-gauge 304 stainless steel tubing with thick flanges to ensure a leak free seal. To eliminate dead space that can cause turbulence and hinder flow that formed collectors are prone to produce, true merge collectors and optimized tube lengths are used for true pulse control technology improving flow and performance. 100% TIG-welded, the smooth curves and increased diameter of this header helps remove restriction and keeps exhaust gas flowing smoothly for improved performance and durability. It uses dual, high flow, 300 cell catalytic converters for maximum flow providing an astonishing low end torque improvement. All components are supplied for a hassle-free installation with no modifications necessary.

    Tig-Welded: 
    100% TIG-Welded by certified craftsmen for race proven strength and durability. TIG-Welding provides the strongest welds reducing stress cracks.

    Dual High Flow Catalytic Converters:
    The semi-metallic 300 cell catalyst is designed for maximum surface area and flow.

    Retains Factory Sensors:
    aFe has designed this system to retain all your factory sensors for a hassle free installation. Also included are 6 O-ring header flange gaskets.

    Mitered Collectors: 
    Mitered collectors not only extend the tube lengths and decrease turbulence, but provide optimal exhaust scavenging. The result is increased horsepower, torque and improved throttle response.

    304 SS Construction: 
    These headers are constructed of durable CNC mandrel bent brushed 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking.

    aFe headers are engineered and manufactured in our Corona, California manufacturing facility.

    Note: This is a "Race Only" product used solely for competition. Its use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization. Any other use including recreational off-road use could be in violation of local, state and federal laws.

    This part alters or deletes the emissions equipment on your car, and may not meet emissions standards in all states. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.

    This Kit Fits: 
    BMW 128i (E82) 08-13 L6-3.0L
    BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi (E90) 06-11 L6-3.0L - Sedan
    BMW 325xi 328i 328xi 328i xDrive (E91) 06-12 L6-3.0L - Wagon
    BMW 328i 328xi 328i xDrive (E92) 07-13 L6-3.0L - Coupe
    BMW 328i (E93) 07-13 L6-3.0L - Convertible

    AFE
    Part #: 48-36307KT
    Price: $1349.10 (USD) 
    $1499.00 (Sale - Save 10%)
    Direct Ship
    Quantity:   
    AC Schnitzer Rear Silencer - F30 F32 340 440

    The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

    This item fits the following BMWs: 
    2016+ F30 BMW 340i 340i xDrive 
    2016+ F32 BMW 440i 440i xDrive
     

    AC Schnitzer
    Part #: 1812230438
    Price: $2495.00 (USD) 
    Direct Ship
    Quantity:   
    BMW M Performance Exhaust - F10 535i 2011+ This is a factory BMW M Performance exhaust for the 2011+ F10 535i Sedan. This is a factory BMW accessory so it fits great, looks and sounds phenomenal, and is exceptional quality. The sound is mildly more aggressive than the stock exhaust with a slightly more throaty note. This exhaust will waken up the stock 535i personality with a better sound and improved flow. If you feel the stock exhaust is just TOO quiet this is a great option without going overboard.

    This exhaust system includes both the left and right rear mufflers (18302354362), exhaust tips (18302354364) and hardware.

    This item fits the following BMWs:
    2011+ F10 BMW 535i 535i xDrive
    Genuine BMW
    Part #: 18302354362KIT
    Price: $1432.85 (USD) 
    Ships in 4 days
    Free Shipping Free Shipping
    Quantity:   
    AC Schnitzer Sport Rear Silencer - Black - F87 M2

    The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

    This item fits the following BMWs: 
    2016+ F87 BMW M2

    AC Schnitzer
    Part #: 18122873209
    Price: $2195.00 (USD) 
    Direct Ship
    Quantity:   
    Innotech Titanium Valvetronic exhaust system - F12/13 M6

    For car enthusiasts, one of the key aspects to your car is the sound. That being said, in can be very difficult to find the right exhaust that gives you the right note. Sometimes too loud, other times too quiet and just not always what you want. Now, you no longer have to choose between loud or quiet thanks to Innotech Performance (iPE). They have created and exhaust system that gives you the perfect blend of performance and sound while giving you control at your fingertips. 

    Innotech takes pride in becoming an industry leader in the high performance exhaust community. They've reached this feet by specializing in valvetronic exhaust systems. What is valvetronic? Valvetronic is the term for valve-controlled exhaust technology that delivers power and control to the driver’s seat. Operated by a remote control, these systems have 3 different settings: on, off, auto. With the system set to on, the valves are fully open for the best performance and sound. When set to off, the valves close, resulting in significantly reduced sound. The final setting is off, which may be the best option for most. The system detects RPM and fuel pedal signal and adjusts the valve accordingly for the ultimate driving experience. 

    Each part of the exhaust system is individually designed to fit it's application perfectly. The unique designs overcome the limits set by the stock exhaust, so that performance, sound, and driving pleasure can be increased dramatically.

    Kit Includes:

    • Front pipe
    • X-pipe
    • Valvetronic Muffler
    • Quad Polished tips
    • Remote Control Kit
    • Full Titanium construction for lighter weight and unrivaled performance
    Innotech
    Part #: BM012TI
    Price: $7500.00 (USD) 
    Direct Ship
    Quantity:   
    AC Schnitzer Racing Rear Silencer - F3X 340 440

    The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

    This item fits the following BMWs: 
    2016+ F30 BMW 340i, 340i xDrive 
    2016+ F32 F36 BMW 440i, 440i xDrive - Coupe and Gran Coupe

    AC Schnitzer
    Part #: 1812230436
    Price: $2495.00 (USD) 
    Direct Ship
    Quantity:   
    AFE Exhaust - Cat-Back - F10 M5 2012-2015 with Carbon Fiber Tips aFe introduces the MACH Force XP exhaust system for the BMW M5 F10 twin-turbo. In recent testing this system produced 18 horsepower and 30 lbs. x ft. of torque. This unique exhaust system is constructed from TIG-welded, 3" mandrel bent 304 stainless steel and uses quad, high-flow mufflers. This system was designed and engineered by tuning the perfect tube lengths, ultimately maximizing performance across the power band while maintaining a great tone. Also included is an X-pipe balance tube which equalizes and evenly distributes exhaust pulses for increased flow and minimizing exhaust drone. To finish off this system, aFe uses four 4" carbon fiber tips with 303 stainless steel machined finish inserts. This exhaust uses all factory hanger locations for a hassle-free installation. No modifications necessary. 

    All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

    Lightweight, Race Inspired Carbon Fiber Tips:
    Race inspired and lightweight carbon fiber tips with stainless steel inserts are used for an aggressive, yet elegant styling.

    X-Pipe Balance Tube:
    An X-pipe balance tube is used to equalize and evenly distribute exhaust pulses which minimizes exhaust drone and increases flow and performance.

    Mitered Merge Collectors: 
    Mitered collectors decrease turbulence and increase exhaust velocity resulting in increased horsepower, torque and improved throttle response.

    Leak-Free Seal:
    High quality OE style flanges and band clamps are used for a complete 360 degree sealing surface.

    Quad Muffler Design:
    Free-flowing mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

    Simple Installation:
    All systems use factory mounting locations providing stability and hassle-free installation.
    AFE
    Part #: 49-36317-C
    Price: $4049.10 (USD) 
    $4499.00 (Sale - Save 10%)
    Direct Ship
    Quantity:   
    AC Schnitzer Sport Rear Silencer - E65 E66

    The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

    This item fits the following BMWs: 
    2002-2007 E65 BMW 760i  
    2002-2007 E66 BMW 760Li

    AC Schnitzer
    Part #: 181265520
    Price: $1595.00 (USD) 
    Direct Ship
    Quantity:   
    Active Autowerke Generation 6 Signature Exhaust - E46 M3

    Designed specifically for the E46 BMW M3 exhaust system, the all-stainless Active Autowerke Generation 6 is our most innovative cat-back exhaust to date. Its precision-tuned straight-through design with in line resonators offers an incomparable combination of power, sound and styling.

    Well suited to both naturally aspirated and supercharged vehicles, this new and revolutionary BMW M3 Exhaust design employs inspired pipe routing and optimum diameters to enable the Gen 6 to literally unleash horsepower without restrictions. Sporting the same classic 80mm tips like the earlier versions, everything else about the Gen 6 is new. It’s lighter, stronger and more robust – with a distinct sound unique to the generation. Does it work? You bet it does. Performance gains of 5-7 peak rear WHP can be expected. Is it really that free-flowing? Comparison dyno tests were run on an E46 BMW M3 with no rear exhaust vs one with the Gen 4 system installed. Zero power loss was measured with the Gen 6 in place.

    Sporting a newer, more rounded look; an aerodynamic fit; New Brushed Finish and quad 80mm straight tips, this rig is considered by many enthusiasts to be the sleekest, most aggressive exhaust around.

    Installation is simple, utilizing all the stock mount points with no rear valance mod required. Combined with the Active Autowerke BMW M3 Sport Header, you can build the ultimate BMW M3 exhaust!

    KEY FEATURES:

    • Quad 80 mm stainless steel tips
    • New Brushed Finish 100% 304 stainless steel 
    • Distinct & Robust Sound
    • Proven to support over 600+ HP
    • Performance gains of 5-7 peak rear WHP
    • Dyno-Tested & Proven
    • Large inlet pipes with resonators
    • Illustrated instruction manual 
    • Two year limited warranty with free tech support 
    • Easy bolt-on installation
    Active Autowerke
    Part #: 11-007
    Price: $1350.00 (USD) 
    Direct Ship
    Quantity:   
    AFE
    Part #: 48-46303KT
    Price: $458.10 (USD) 
    $509.00 (Sale - Save 10%)
    Direct Ship
    Free Shipping Free Shipping
    Quantity:   
    AC Schnitzer Rear Silencer - F30 320

    The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

    This item fits the following BMWs: 
    2012+ F30 BMW 320i, 320i xDrive

    AC Schnitzer
    Part #: 1812230121
    Price: $1895.00 (USD) 
    Direct Ship
    Quantity:   
    F26 X4 35i 3D Design Sport Muffler - Quad Tip

    This sport muffler gives your BMW a pleasant performance exhaust note and is the perfect complement to your new 3D Design rear diffuser. It installs in place of the stock muffler and will not impact vehicle emissions equipment, making it an ideal choice for a daily-driven car where looks & performance are a concern. 

    3D Design is focused on high-quality styling components that allow you to personalize the look of your BMW & remain true to the car's original form. Inspired by European tuning trends & Japan's unique VIP tuning style, their wide range of lips, diffusers, side skirts, & spoilers are made from high-quality urethane or super light, super strong prepreg dry carbon and install easily to your factory bumpers & skirts to offer an understated, aggressive performance look.

    3D Design
    Part #: 4101-22611
    Price: $3295.00 (USD) 
    Direct Ship
    Quantity:   
    AC Schnitzer Performance Rear Silencer - Black - F25 X3

    The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

    This item fits the following BMWs: 
    2014+ F25 BMW X3 sDrive28i, xDrive28d, xDrive35i

    2014+ F26 BMW X4 xDrive28i, xDrive35i

    AC Schnitzer
    Part #: 18122263129
    Price: $1995.00 (USD) 
    Direct Ship
    Quantity:   
    AFE
    Part #: 49-36311-P
    Price: $1349.10 (USD) 
    $1499.00 (Sale - Save 10%)
    Direct Ship
    Quantity:   
    AFE Twisted Steel Downpipe with Cats - E9x 335i, E82 135i (N55)

    Features:

    • In house testing produced a max gain of +14 horsepower and +39 ft. lbs. of torque verified by our in house dyno (results from the "Race" version down pipe)
    • This system utilizes a 400 CPSI (cell per square inch) 48-state legal catalytic converter for maximum flow
    • A unique 2.5" to 3" stepped design is used to increase exhaust velocity
    • Constructed of durable mandrel bent brushed 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking
    • 100% hand TIG-Welded by certified craftsmen for race proven strength and durability
    •  
    • aFe power introduces an all new Elite Twisted Steel catted down pipe for the BMW 335i (E9x) /135i (E82/88) 11-13 with L6-3.0L (t) N55 engine. This down pipe is designed using a 48-state legal 400 cpsi catalytic converter and mandrel-bent, 304 stainless steel tubing for optimum flow resulting in added horse power and torque. The down pipe is 100% hand TIG-Welded and uses a 2-1/2" into 3” stepped design that increases exhaust velocity and eliminates low pressure drops which helps to scavenge the exhaust for increased intake charge and more power.

      48-State Legal Catalytic Converter:
      This system utilizes a 400 CPSI (cell per square inch) 48-state legal catalytic converter for maximum flow.

      2-1/2" to 3" Stepped Design:
      A unique 2.5" to 3" stepped design, is used to increase exhaust velocity and increase usable torque. This means more aggressive throttle response and increased passing power.

      TIG-Welded: 
      100% TIG-Welded by certified craftsmen for race proven strength and durability. TIG-Welding provides the strongest welds reducing stress cracks.

      Brushed 304 SS Construction:
      This down pipe is constructed of durable mandrel bent brushed 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking.

      Hassle-Free Installation:
      All hardware and brackets are included for a hassle-free installation. This unit also comes with a 2-year warranty.

      Also Fits:
      BMW 135i (E82/88) 10-14 L6-3.0L (t) N55
      BMW 335i/xi (E90/92) 09-13 L6-3.0L (t) N55
      BMW X1 35xi (E84) 09-15 L6-3.0L (t) N55

      aFe down pipes are engineered and manufactured in our Corona, California manufacturing facility.

    This product modifies (but does not remove or defeat) emissions equipment. For this reason this product may not be CARB compliant, and therefore not emissions legal in some states. Consult local laws and regulations in your area. For more information on this product, feel free to contact our sales department.

    AFE
    Part #: 48-36302-HC
    Price: $719.10 (USD) 
    $799.00 (Sale - Save 10%)
    Direct Ship
    Free Shipping Free Shipping
    Quantity:   
    Awron Exhaust Valve Control Module

    AWRON EVC - Exhaust Valve Control Module is a complete plug-n-play controller designed for BMW's with Exhaust Flap Valves. It allows you to remotely open and close the vacuum operated exhaust valve. Close the valves for quiet operation (including cold starts) or open them up for maximum performance sound at the touch of a button. Noise reduction is approximately 8 decibels. Instantaneous response, no need to wait 2+ seconds for the valves to open or close!

    This module allows control of the exhaust sound when optimum performance is not required. When the valve is closed, the exhaust is quiet. When fully opened, the exhaust system is in maximum flow mode and the sound of your exhaust is louder. Many BMW owners want a more performance oriented sound without being annoying from their exhaust. After the 30 minute installation, EVC allows the owner to open and close the valve. Compatible with all exhaust systems (OEM or aftermarket) that retain the factory exhaust valve system.

    The ECV is installed right after the catalytic converter, and adjustment of the valve is done through a cable run from the cockpit to the valve body. The AWRON valve controlled exhaust gives the user the ability to control the performance and sound of the exhaust with the push of a steering wheel button. This very high quality, stainless steel module is like fitting to OEM component to your vehicle. All necessary hardware included.

    Features

    • Full control over Exhaust Valve Control at the touch of a steering wheel button
    • Open / Close Exhaust Valve at any time and instantly
    • Quiet cold starting. Flaps can be opened on cold start (not possible with OEM / M-Menu)
    • Check Engine Light indicator removal for those running cat-less downpipes
    • Easy 30 minute installation process with no wire cutting
    • Instantaneous response, no need to wait 2+ seconds for the valves to open or close!
    • Operated visa steering wheel cruise control rocker switch for fast convenient operation.
    • Completely removable at any time

    Operation
    The EVC module is operated by the cruise control rocker switch on the steering wheel. If the cruise control is switched off, you can switch back and forth. This allows for easy handling and ensures the control of the vehicle by the driver. To open the flap, push button up, to close push button down. AUTO = the original Integrated safety feature (flap opens on click down or high RPMs or high engine temperature) stays active and is not influenced / overwritten by our system (Independent of which setting you have chosen). OPEN = flaps are opened by using of original and already existing button in your vehicle. The M1 button (at the steering wheel) - Independent of the M1 Configuration CLOSE = flaps are closed and means that flap stay always closed under 4000 RPM. Over 4000 RPM gauge AWRON transferred control over ECU (OEM controlling).

    Plug & Play Solution
    The module is supplied with all connectors and parts you need. Installation time: 30 minutes. Only 5 cables and one plug have to be connected (no soldering / cutting).

    Passive / Invisible mode
    Auto passive mode will allow factory electronic test equipment or other aftermarket devices to be utilized without causing irregularities in readouts or operation.

    USB port for easy setup / updates
    Modules can be configured and updated using via PC

    Models Supported:
    F1x 5-Series with electronic valve control
    F2x 1-Series and 2-Series with electronic valve control
    F3x 3-Series and 4 Series with electronic valve control
    F8x 3-Series New M3 / M4 (all models)

    Awron
    Part #: AW60000
    Price: $699.95 (USD) 
    Ships on Dec 26, 2017
    Free Shipping Free Shipping
    Quantity:   
    F10 M5 BMW Competition Package Exhaust Upgrade The Competition Package Exhaust for the M5/M6 consists of new rear mufflers and gloss black tips that add a dose of adrenaline to the audio experience. The difference is very noticeable and absolutely reinforces the M car character that the stock exhaust is lacking. The Comp Package exhaust has a lot of the same sounds as other M5 performance mufflers - it pops and burbles and growls but is still a refined sound. It's just as you would expect from BMW's Motorsport engineers. This might be the best solution for owners looking for a more aggressive sound but don't want the loudest exhaust on the block.

    We sell this as a complete exhaust upgrade - everything you need to change over to the M5 Comp Package mufflers. BMW engineered the mufflers to be replaceable. That makes this install very simple and can be done with the rest of the exhaust still attached to the car. And the swap is not permanent; you can revert back to the stock exhaust at any time. Install time should be about one hour.

    Included with our Comp Package exhaust upgrade:
  • Left Competition Package Muffler (BMW p/n 18307848828)
  • Right Competition Package Muffler (BMW p/n 18307848829)
  • Competition Package glossy black tips, set of 4 (BMW p/n 18307849341)
  • 80mm slip-on connecting pipes (BMW p/n 18307560815 x 2) Acousti/Seal compound recommended (not included, add from the options below).

    Video:

    This item fits the following BMWs:
    2012+ F10 BMW M5
  • Genuine BMW
    Part #: TMS193571
    Price: $2593.66 (USD) 
    Ships on Jan 5, 2018
    Quantity:   
    
AFE Exhaust - Downpipe-Back - F10 535i 2011-2015 Pol-Dual The MACH Force XP exhaust system for the 2011-2015 BMW 535i N55 produced 9 horsepower and 7 lbs. x ft. of torque. This exhaust system is constructed from 2.50” mandrel bent 304 stainless steel, TIG-welded and has a hand brushed finish. The system begins with a 3.50” inlet off of the down pipe and merges into dual 2.50” tubing which improves performance across the power band while maintaining a great tone. Countless hours of R&D was used to ensure the perfect decibal level without compromising performance. To finish off this exhaust are two adjustable rolled double wall angle cut 3.5"OD 304 stainless steel tips which you can move forward or rearward depending on personal preference. This exhaust uses all factory hanger locations for a hassle free installation. No modifications necessary. 

    All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.
    AFE
    Part #: 49-36308
    Price: $1799.10 (USD) 
    $1999.00 (Sale - Save 10%)
    Direct Ship
    Quantity:   
    i8 Titanium Exhaust - BMW i8 2014+ As Used on Project i8
    The BMW i8 is all about lightweight, high technology and performance. This fully titanium system is 50% lighter than the stock steel exhaust! It produces more power and a more robust exhaust note for increased driving pleasure. Manufactured in Japan, this system offers the highest quality construction and fitment in keeping with the i8 character. Performance is optimized through the use of larger diameter tubing and reduced back pressure muffler. Each exhaust is also tuned to free up the engine's sound while still letting the engine's characteristics shine through.

    Weight: 18.0 lbs - 50% less the stock!

    video: i8 Titanium Exhaust




    This item fits the following BMWs:
    2015+ I12 BMW i8
    Turner Motorsport
    Part #: I8-TI-EXHAUST
    Price: $4496.35 (USD) 
    $4995.95 (Sale - Save 10%)
    Ships in 2 Days
    Quantity:   
    Genuine BMW M Performance Inconel Exhaust - E90 M3 - 2008+ As used on the Lime Rock M3 Project Car
    With the racetrack and the street in mind, this new exhaust system is crafted from an extremely heat-resistant and lightweight chrome-nickel alloy called Inconel®. This flow optimized exhaust system reduces exhaust backpressure and allows the M3’s 414 horsepower V8 engine to produce an even more powerful sound. Inconel’s unique qualities allowed engineers to reduce the thickness of the tubing from 1.5mm to 0.8mm. This resulted in a weight reduction of approximately 40%, or about 20 lbs. when compared to the stock exhaust system. Inconel has also proven to be very corrosion resistant and has been used at the highest level of Motorsports. The M Performance Exhaust includes perforated inner pipes and polished titanium tips, which are laser engraved with the M logo. It represents the ultimate in technology and sportiness, accentuating the individual character of the BMW M3. The exhaust was developed using state-of-the art CAD and FEM technology ensuring optimum fit and OEM quality.

    This item fits the following BMWs:
    2008+ E90 BMW M3 Sedan
    Genuine BMW
    Part #: 18302184198
    Price: $3596.41 (USD) 
    Ships on Jan 5, 2018
    Free Shipping Free Shipping
    Quantity:   
    AC Schnitzer Performance Silencer - E60

    The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

    This item fits the following BMWs: 
    2011 E60 BMW 525i, 525xi, 528i, 528xi, 530i, 530xi

    AC Schnitzer
    Part #: 181260310
    Price: $1095.00 (USD) 
    Direct Ship
    Quantity:   
    Genuine BMW Performance Inconel Exhaust - E92 M3, E93 M3 - 2008+ As used on the Lime Rock M3 Project Car
    With the racetrack and the street in mind, this new exhaust system is crafted from an extremely heat-resistant and lightweight chrome-nickel alloy called Inconel®. This flow optimized exhaust system reduces exhaust backpressure and allows the M3’s 414 horsepower S65 V8 engine to produce an even more powerful sound. Inconel’s unique qualities allowed engineers to reduce the thickness of the tubing from 1.5mm to 0.8mm. This resulted in a weight reduction of approximately 40%, or about 20 lbs. when compared to the stock exhaust system. Inconel has also proven to be very corrosion resistant and has been used at the highest level of Motorsports. The M Performance Exhaust includes perforated inner pipes and polished titanium tips, which are laser engraved with the M logo. It represents the ultimate in technology and sportiness, accentuating the individual character of the BMW M3. The exhaust was developed using state-of-the art CAD and FEM technology ensuring optimum fit and OEM quality.

    This item fits the following BMWs:
    2008+ E92 BMW M3 Coupe
    2008+ E93 BMW M3 Convertible
    Genuine BMW
    Part #: 18302184201
    Price: $3596.41 (USD) 
    Ships in 4 days
    Free Shipping Free Shipping
    Quantity:   
    Active Autowerke Signature Exhaust - E92 335i (non-xDrive)

    Active Autowerke’s BMW 335i Signature Exhaust system is the leading performance exhaust system currently on the market for E90, E92, and E93 335i models. This powerful and durable system is a true bolt-on, making for easy installation. To ensure longevity, our 335i exhaust is 100% constructed of 304 stainless-steel.

    The Active Autowerke BMW 335i Signature Exhaust for the fifth-generation 3-series boasts dual 90mm tips, and stainless-steel hardware to further add style and performance to your BMW.

    The BMW 335i Signature Exhaust System has been dyno-tested and proven to add an additional 15-22 RWHP, and is a must for the enthusiast looking to unleash more power quickly and easily from their BMW 335i.

    This system increases airflow by more than 35% over stock. It utilizes a true X-pipe design, created to increase the exhaust system’s scavenging affect, which is less restrictive than the H-pipe design employed by most aftermarket exhaust manufacturers. The entire system easily bolts onto either the factory downpipes, or Active Autowerke downpipes:

    The system was created with an anti-flex design and hardware to assure proper fitment at all times. The inlet pipes of the system are larger than OEM, and were created with a high-flow design. This is the only BMW 335i exhaust system currently on the market to feature a bracket that connects the two mufflers together – though the bracket is not visible.

    There is no cutting required, and detailed instructions accompany the exhaust, ensuring owners will feel confident during installation. The entire BMW 335i Signature Exhaust System is constructed from stainless steel, including connecting pipes, X-pipe, and dual rear mufflers. Several adjustments points allow for the addition of rear diffusers.

    KEY FEATURES OF THE ACTIVE AUTOWERKE BMW 335I SIGNATURE EXHAUST SYSTEM:

    • Dyno-proven gains of 17+ RWHP
    • Dual 90mm stainless-steel tips
    • Complete bolt-on (No cutting required)
    • 100% Polished 304 stainless-steel
    • True X-pipe design
    • Anti-flex design & hardware
    • All stainless-steel hardware
    • Large inlet pipes with high-flow design
    • Illustrated instruction manual
    • 2 Year Warranty

    Fits E92 BMW 335 with N54/N55.

    Active Autowerke
    Part #: 11-011
    Price: $1699.00 (USD) 
    Direct Ship
    Quantity:   
    AFE Exhaust - Cat-Back - F10 M5 2012-2015 with Polished Tips aFe introduces the MACH Force XP exhaust system for the BMW M5 F10 twin-turbo. In recent testing this system produced 18 horsepower and 30 lbs. x ft. of torque. This unique exhaust system is constructed from TIG-welded, 3" mandrel bent 304 stainless steel and uses quad, high-flow mufflers. This system was designed and engineered by tuning the perfect tube lengths, ultimately maximizing performance across the power band while maintaining a great tone. Also included is an X-pipe balance tube which equalizes and evenly distributes exhaust pulses for increased flow and minimizing exhaust drone. To finish off this system, aFe uses four 4" polished tips with 303 stainless steel machined finish inserts. This exhaust uses all factory hanger locations for a hassle-free installation. No modifications necessary. 

    All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

    X-Pipe Balance Tube:
    An X-pipe balance tube is used to equalize and evenly distribute exhaust pulses which minimizes exhaust drone and increases flow and performance.

    Mitered Merge Collectors: 
    Mitered collectors decrease turbulence and increase exhaust velocity resulting in increased horsepower, torque and improved throttle response.

    Leak-Free Seal:
    High quality OE style flanges and band clamps are used for a complete 360 degree sealing surface.

    Quad Muffler Design:
    Free-flowing mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

    Simple Installation:
    All systems use factory mounting locations providing stability and hassle-free installation.
    AFE
    Part #: 49-36317-P
    Price: $3599.10 (USD) 
    $3999.00 (Sale - Save 10%)
    Direct Ship
    Quantity:   
    AC Schnitzer Sport Rear Silencer - Stainless - F32 F36 430

    The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

    This item fits the following BMWs: 
    2016+ F32 BMW 430i, 430i xDrive

    2016+ F36 BMW 430i, 430i xDrive

    AC Schnitzer
    Part #: 1812230152
    Price: $2095.00 (USD) 
    Direct Ship
    Quantity:   
    GruppeM 60mm Titanium Exhaust System  --  BMW E46 M3

    GruppeM designs some of the highest quality intakes and exhaust on the market. Using advanced techniques to get optimized efficiency using specific pipe diameters, they are able to produce an exhaust that not only performs amazingly, but sounds amazing too. Gruppe M's exhaust systems are designed to fit the same as the stock exhaust, eliminating guess-work, allowing for quick and clean fitting systems that require no custom fabrication or assembly. An important detail is their Titanium construction, reducing weight significantly and giving a dry, high-pitch exhaust note that you can't get with standard stainless steel. An added benefit of titanium contruction is that over time heat from the exhaust will change the color of the exhaust system.

    Exhaust Features:

    • Optimized exhaust pipe sizing
    • Ultra-lightweight titanium construction 
    • Racy, high-pitched exhaust note at high revs and heat color gradation
    • Dual 70mm exhaust tips
    • Shot processed stainless steel tail end (made of stainless steel)
    • Value is further enhanced by incorporating the Ram-Air intake system

    This item fits the following BMWs:
    2000-2006 E46 BMW M3

    Gruppe M
    Part #: EXI-0116
    Price: $2646.00 (USD) 
    $2940.00 (Sale - Save 10%)
    Direct Ship
    Quantity:   
    AFE Twisted Steel Racing Downpipe - F30 335i

    aFe is proud to introduce the aFe Twisted Steel® non-catalytic down-pipe for the 2012-2013 BMW F30 335i with the L6-3.0L (N55) engine. In testing this system resulted in a max gain of 13 horsepower and 27 lbs. x ft. of torque and outflowed the restricted OE catalytic converter by up to 190%. This high performance race pipe delivers pure, race-inspired raw power and also produces an aggressive and exciting exhaust sound during hard throttle. aFe also used a massive, light-weight 4" diameter 304 stainless steel tube and progressively tapers to increase exhaust velocity and usable torque.

    Tig-Welded: 
    100% TIG-Welded by certified craftsmen for race proven strength and durability. TIG-Welding provides the strongest welds reducing stress cracks.

    Tapered Design: 
    A unique 4" Dia. 304 stainless steel taper design is used to increase exhaust velocity and increase usable torque. This means more aggressive throttle response and increased passing power.

    Factory O2 Sensor Locations: 
    Factory mounting locations for all O2 sensors.

    Hassle-Free Installation: 
    OE style brackets are included for a hassle-free installation. This unit also comes with a lifetime warranty.

    aFe down pipes are engineered and manufactured in our Corona, California manufacturing facility.

    Note: This is a "Race Only" product used solely for competition. Its use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization. Any other use including recreational off-road use could be in violation of local, state and federal laws. A check engine light will emit and aFe recommends using a programmer but it is not necessary.

    This part alters or deletes the emissions equipment on your car, and may not meet emissions standards in all states. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.

    AFE
    Part #: 48-36311KT
    Price: $449.10 (USD) 
    $499.00 (Sale - Save 10%)
    Direct Ship
    Quantity:   
    AC Schnitzer Sport Rear Silencer - Stainless - F85 F86

    The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included. 

    This item fits the following BMWs: 
    2015+ F85 BMW X5
    2015+ F86 BMW X6

    AC Schnitzer
    Part #: 1812286722
    Price: $4095.00 (USD) 
    Direct Ship
    Quantity:   
    Innotech Valvetronic exhaust system - F30 328i

    For car enthusiasts, one of the key aspects to your car is the sound. That being said, in can be very difficult to find the right exhaust that gives you the right note. Sometimes too loud, other times too quiet and just not always what you want. Now, you no longer have to choose between loud or quiet thanks to Innotech Performance (iPE). They have created and exhaust system that gives you the perfect blend of performance and sound while giving you control at your fingertips. 

    Innotech takes pride in becoming an industry leader in the high performance exhaust community. They've reached this feet by specializing in valvetronic exhaust systems. What is valvetronic? Valvetronic is the term for valve-controlled exhaust technology that delivers power and control to the driver’s seat. Operated by a remote control, these systems have 3 different settings: on, off, auto. With the system set to on, the valves are fully open for the best performance and sound. When set to off, the valves close, resulting in significantly reduced sound. The final setting is off, which may be the best option for most. The system detects RPM and fuel pedal signal and adjusts the valve accordingly for the ultimate driving experience. 

    Each part of the exhaust system is individually designed to fit it's application perfectly. The unique designs overcome the limits set by the stock exhaust, so that performance, sound, and driving pleasure can be increased dramatically.

    Kit Includes:

    • Front pipe
    • Mid-pipe
    • Valvetronic Muffler
    • Dual Polished tips
    • Remote Control Kit
    Innotech
    Part #: BM017
    Price: $2802.50 (USD) 
    $2950.00 (5% off MSRP)
    Direct Ship
    Quantity:   
    Genuine BMW M Performance Exhaust System for E90 325i 328i, 328Xi 330i This is a factory BMW Performance exhaust for the 6/2006-2012 E90 325i 328i, 328Xi 330i sedans. This is a factory BMW accessory so it fits great, looks and sounds phenomenal, and is exceptional quality. The sound is mildly more aggressive than the stock exhaust with a slightly more throaty note. This exhaust will waken up the stock 328 personality with a better sound and improved flow. If you feel the stock exhaust is just TOO quiet this is a great option without going overboard. To quote one user, "It feels much different than a stock 328i. Quiet enough to sound classy, and a clean sporty growl when you rev it up."

    This exhaust is a two-piece system that includes the rear muffler and center resonator. On some models you will need to cut the stock exhaust after the resonator to install this; other models are already a two-piece system. A BMW factory exhaust clamp is included to mount to the factory cat section. We also recommend using the exhaust sealing paste to ensure a leak-free install.

    This item fits the following BMWs:
    6/2006+ E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
    6/2006+ E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    Genuine BMW
    Part #: 18102208793
    Price: $1009.70 (USD) 
    In Stock
    Quantity:   
    AC Schnitzer Sport Rear Silencer - Black - F3X 335 435

    The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

    This item fits the following BMWs: 
    2016+ F30 BMW 335i, 335i xDrive 
    2016+ F32 F36 BMW 435i, 435i xDrive - Coupe and Gran Coupe

    AC Schnitzer
    Part #: 18122303479
    Price: $2495.00 (USD) 
    Direct Ship
    Quantity:   
    Active Autowerke Signature Performance Rear Exhaust - F12 M6

    True performance, durability, and attractive weight advantage with innovative features places the Active Autowerke BMW F12 M6 Signature Exhaust in a class of its own. This M6 performance exhaust is unmatched due to the characteristics it consistently conveys. Not only can enthusiasts expect to reach a new level of performance with the installation of Active Autowerke’s F12 M6 signature exhaust system, but they can also anticipate a sleek style and impressive horsepower gains! For drivers looking to get the most out of their performance exhaust, our F12 M6 Signature Exhaust delivers on all fronts.

    The overall performance of the F12 performance Exhaust presents multiple benefits to owners. Not only does it provide a striking new view from the back, it also produces an aggressive yet refined tone and noticeable horsepower gains. Those looking for the ultimate solution to more power, sound and quality from their F12 M6, just found it!

    Active Autowerke's M6 performance exhaust is made from durable, polished 100% 304 stainless steel, and features our double-walled signature stainless steel. The tips are also adjustable, and feature an embossed Active Autowerke logo.

    F12 M6 drivers don’t just want to look good, they also want to sound good! With the addition of our M6 performance exhaust, enthusiasts can expect a much more refined sound. This sophisticated new tone is also much more assertive – giving drivers just what they are after when installing the F12 M6 signature exhaust!

    Arguably the most important benefit of the Active Autowerke M6 performance exhaust is the increase in horsepower. They took the system to their in-house Mustang dyno to see how much extra horsepower the system unleashes. The results were gains of 7+ WHP over stock configuration due to a system constructed for maximum air flow.

    This BMW F12 6-Series exhaust delivers everything we know you would want in a performance exhaust. Eye-catching style, a sophisticated yet aggressive tone, weight savings, and – most importantly – measurable horsepower performance gains.

    Features:

    • Larger diameter mandrel bent piping for maximum flow
    • Durable, polished 100% 304 stainless steel
    • Adjustable Tips with embossed Active Autowerke logo on the dual tip model
    • Improved power & torque throughout entire RPM band
    • Actual dyno measure results with gains of 7+ WHP over stock configuration
    • Fitment for M sport diffuser
    • Complete illustrated instruction manual included
    • Two year warranty included

    Fitment:
     2012+ F12 BMW M6

    Active Autowerke
    Part #: 11-030
    Price: $2295.00 (USD) 
    Direct Ship
    Quantity:   
    Genuine BMW M Performance Muffler - E82 135i, E88 135i - 2008+ The E82 135i BMW Performance exhaust system is made of high quality stainless steel with 2 x 80 mm chrome-plated tail pipes. Developed with the latest CAD and FEM technology for the best fit and OEM quality. Due to an optimized exhaust flow, this muffler produces an incredible note without the inherent interior cabin droning noise associated with some aftermarket exhaust systems. Exhaust backpressure is also decreased with the BMW Performance exhaust. Clamping sleeves and other essential fastening material is included.

    This item fits the following BMWs:
    2008+ E82 BMW 135i Coupe
    2008+ E88 BMW 135i Convertible
    Genuine BMW
    Part #: 18102208806
    Price: $1070.71 (USD) 
    Ships in 4 days
    Free Shipping Free Shipping
    Quantity:   
    AFE
    Part #: 49-36312-P
    Price: $1349.10 (USD) 
    $1499.00 (Sale - Save 10%)
    Direct Ship
    Quantity:   
    AC Schnitzer Sport Rear Silencer - Stainless - F8X M3

    The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

    This item fits the following BMWs: 
    2014+ F80 BMW M3

    AC Schnitzer
    Part #: 1812282512
    Price: $2695.00 (USD) 
    Direct Ship
    Quantity:   
    Active Autowerke Signature Exhaust - E90 335 (non-xDrive)

    Active Autowerke’s BMW 335i Signature Exhaust system is the leading performance exhaust system currently on the market for E90, E92, and E93 335i models. This powerful and durable system is a true bolt-on, making for easy installation. To ensure longevity, our 335i exhaust is 100% constructed of 304 stainless-steel.

    The Active Autowerke BMW 335i Signature Exhaust for the fifth-generation 3-series boasts dual 90mm tips, and stainless-steel hardware to further add style and performance to your BMW.

    The BMW 335i Signature Exhaust System has been dyno-tested and proven to add an additional 15-22 RWHP, and is a must for the enthusiast looking to unleash more power quickly and easily from their BMW 335i.

    This system increases airflow by more than 35% over stock. It utilizes a true X-pipe design, created to increase the exhaust system’s scavenging affect, which is less restrictive than the H-pipe design employed by most aftermarket exhaust manufacturers. The entire system easily bolts onto either the factory downpipes, or Active Autowerke downpipes:

    The system was created with an anti-flex design and hardware to assure proper fitment at all times. The inlet pipes of the system are larger than OEM, and were created with a high-flow design. This is the only BMW 335i exhaust system currently on the market to feature a bracket that connects the two mufflers together – though the bracket is not visible.

    There is no cutting required, and detailed instructions accompany the exhaust, ensuring owners will feel confident during installation. The entire BMW 335i Signature Exhaust System is constructed from stainless steel, including connecting pipes, X-pipe, and dual rear mufflers. Several adjustments points allow for the addition of rear diffusers.

    KEY FEATURES OF THE ACTIVE AUTOWERKE BMW 335I SIGNATURE EXHAUST SYSTEM:

    • Dyno-proven gains of 17+ RWHP
    • Dual 90mm stainless-steel tips
    • Complete bolt-on (No cutting required)
    • 100% Polished 304 stainless-steel
    • True X-pipe design
    • Anti-flex design & hardware
    • All stainless-steel hardware
    • Large inlet pipes with high-flow design
    • Illustrated instruction manual
    • 2 Year Warranty

    Fits E90 BMW 335 with N54/N55.

    Active Autowerke
    Part #: 11-013
    Price: $1699.00 (USD) 
    Direct Ship
    Quantity:   
    BMW M Performance Exhaust - for Standard Bumper - F22 M235i As Used on Project F22 228i
    This is a factory BMW M Performance exhaust for the 2014+ F22 M235i. This is a factory BMW accessory so it fits great, looks and sounds phenomenal, and is exceptional quality. The sound is mildly more aggressive than the stock exhaust with a slightly more throaty note. This exhaust will waken up the stock M235i personality with a better sound and improved flow. If you feel the stock exhaust is just TOO quiet this is a great option without going overboard. A unique high-tech look is provided by two either chrome-plated or Carbon fiber 80mm exhaust tips which are laser engraved with the ///M logo.

    This exhaust system includes the rear muffler (18302293766 ). Please select exhaust tip options below. Chrome - (18302354364) Carbon Fiber (18302355889) . A BMW factory exhaust clamp is included to mount to the factory cat section.

    Not for cars with the factory M Aerodynamics package diffuser! Please note photos shown are on a car with the M Aero rear diffuser

    This item fits the following BMWs:
    2014+ F22 BMW M235i
    Genuine BMW
    Part #: 18302293766
    Price: $1165.61 (USD) 
    Ships in 4 days
    Free Shipping Free Shipping
    AC Schnitzer Sport Rear Silencer - Stainless - F3X 328 428

    The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

    This item fits the following BMWs: 
    2016+ F30 BMW 328i, 328i xDrive 
    2016+ F32 F36 BMW 428i, 428i xDrive - Coupe and Gran Coupe

     

    AC Schnitzer
    Part #: 1812230142
    Price: $1895.00 (USD) 
    Direct Ship
    Quantity:   
    AFE Mach Force-Xp Cat-Back Exhaust w/ Gloss Black Tips - F30 340i BMW

    High flow exhaust system directly from aFe, one of the top after market performance manufacturers. This new MACH Force XP exhaust system is for the 2016+ BMW 340i F30 with the new N58 3.0L turbo engine. In recent testing this system produced 14 horsepower and 13 lbs. x ft. of torque. This exhaust system is constructed from 3.0” mandrel bent stainless steel and is hand TIG-welded. The system uses a high flow transverse muffler with 3" diameter tubing which improves performance across the power band while maintaining a great tone. To finish off this exhaust are dual double wall resonated angle cut gloss black 304 stainless steel tips. The factory actuator drive is retained with the aFe exhaust so that a check engine light does not occur. This exhaust uses all factory hanger locations for a hassle free installation. No modifications necessary.

    Simple Installation:
    All systems use factory mounting locations providing stability and hassle-free installation.

    Leak-Free Seal:
    High quality band clamps are used for a complete 360 degree sealing surface.

    Aggressive Sound:
    A free-flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

    Product Features:

    • +14 HP and +13 lbs. x ft. Torque max gains
    • Constructed from 100% hand TIG-welded, 3" to 2-1/2" mandrel bent, brushed finished 304 stainless steel tubing
    • Includes a factory style exhaust valve
    • Utilizes a unique high flow, transverse muffler with a high-temp powder-coated black finish
    • Includes dual 4" diameter, gloss black 304 stainless steel tips
    • Factory style V-band flange for a secure leak-free seal
    • Uses all factory hanger locations for a hassle-free installation

     

    Fits the Following BMW's:
    2016+ F30 BMW 340i B58

    AFE
    Part #: 49-36334-B
    Price: $1619.10 (USD) 
    $1799.00 (Sale - Save 10%)
    Direct Ship
    Quantity:   
    Agency Power Titanium Muffler - Quad Tip Exhaust - BMW 1M E82

    New from Agency Power is their full line of Titanium Exhaust Systems custom built for your vehicle. Having dealt with Titanium catbacks, mufflers, and other exhaust components since 2004, Agency Power has expanded the line up of systems which give you the ultimate advantage in performance and weight savings.

    Agency Power Industries LLC was developed out of the need to provide quality, functional, and fashionable racing products. Starting from sway bar endlinks for the  Subaru  WRX back in 2003, Agency Power now has and indepth number of parts for cars ranging from  Porsche ,  BMW ,  Ferrari,   Subaru ,  Mitsubishi ,  Nissan  and many more. Based out of Gilbert, Arizona, Agency Power has established itself as one the core aftermarket companies for niche tuner products. Agency Power is constantly developing new functional and race proven products. With dealers worldwide, the AP brand is recognized and trusted. 

    Agency Power
    Part #: AP-BM-W-02
    Price: $2000.00 (USD) 
    Direct Ship
    Quantity:   
    Mach Force XP Cat Back Exhaust System This new MACH Force XP exhaust system is for the 2012 to 2015 BMW 328i F30 with the new N20 2.0L turbo engine. In recent testing this system produced 12 horsepower and 17 lbs. x ft. of torque. This exhaust system is constructed from 3.0” mandrel bent stainless steel and is MIG-welded. The system uses a high flow 18" transverse muffler with 3" diameter tubing which improves performance across the power band while maintaining a great tone. To finish off this exhaust are dual double wall resonated angle cut gloss black 304 stainless steel tips. The factory actuator drive is retained with the aFe exhaust so that a check engine light does not occur. This exhaust uses all factory hanger locations for a hassle free installation. No modifications necessary.  Note: Does not fit vehicle with N26 engine. N26 engine is SULEV (super low emission) version of N20

    All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

    Simple Installation:
    All systems use factory mounting locations providing stability and hassle-free installation.

    Leak-Free Seal:
    High quality band clamps are used for a complete 360 degree sealing surface.

    Aggressive Sound:
    A free-flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.
    AFE
    Part #: 49-46310-P
    Price: $1079.10 (USD) 
    $1199.00 (Sale - Save 10%)
    Direct Ship
    Quantity:   
    Innotech Valvetronic exhaust system - E63/64 M6

    For car enthusiasts, one of the key aspects to your car is the sound. That being said, in can be very difficult to find the right exhaust that gives you the right note. Sometimes too loud, other times too quiet and just not always what you want. Now, you no longer have to choose between loud or quiet thanks to Innotech Performance (iPE). They have created and exhaust system that gives you the perfect blend of performance and sound while giving you control at your fingertips. 

    Innotech takes pride in becoming an industry leader in the high performance exhaust community. They've reached this feet by specializing in valvetronic exhaust systems. What is valvetronic? Valvetronic is the term for valve-controlled exhaust technology that delivers power and control to the driver’s seat. Operated by a remote control, these systems have 3 different settings: on, off, auto. With the system set to on, the valves are fully open for the best performance and sound. When set to off, the valves close, resulting in significantly reduced sound. The final setting is off, which may be the best option for most. The system detects RPM and fuel pedal signal and adjusts the valve accordingly for the ultimate driving experience. 

    Each part of the exhaust system is individually designed to fit it's application perfectly. The unique designs overcome the limits set by the stock exhaust, so that performance, sound, and driving pleasure can be increased dramatically.

    Kit Includes:

    • Front pipe
    • X-pipe
    • Back pipe
    • Valvetronic Muffler
    • Quad Polished tips
    • Remote Control Kit
    Innotech
    Part #: BM007
    Price: $4037.50 (USD) 
    $4250.00 (5% off MSRP)
    Direct Ship
    Quantity:   
    F8X M3/M4 Turner Test Pipes
    • Perfect mix of more sound while eliminating rasp and rattle
    • Complements the stock sound - a refinement not a total transformation
    • Power & Torque gains
    • Preserve the stock muffler flaps and appearance

     

    Our Turner M3/M4 Test Pipes delete the secondary cats for more sound and performance. One of the more common complaints about the M3/M4 exhaust is the lack of sound and it's clear why - two turbos, four catalytic converters, a resonator, and a large muffler with electronic flaps all work to dampen exhaust volume. We tried a number of different exhaust layouts but this was our favorite for a moderate increase in volume, "rasp and rattle" eliminated, easy install, low cost, and a power gain as a bonus!

    Our M3/M4 front connecting pipes replace the stock section after the downpipes and before the resonator. They bolt to the downpipes with factory gaskets and hardware (will not fit with factory M Performance exhaust). We left the stock resonator in place because we felt removing it was too loud and it did a good job of tuning the exhaust note at certain RPM. With the Turner Test Pipes we got just enough exhaust sound in the cabin without it being obnoxious or intrusive. We especially love the subtle bark this setup gives when letting off the throttle!

    Made in the USA!

    Customer Feedback:

    • "RPower" - "After driving the car a couple of days during the work week I can give more of my thoughts on the Turner Test Pipes. The best word to describe the Turner Test Pipes is TRANSFORMATION! The start up noise is very loud and aggressive-no more boring weed eater lawnmower sound! These pipes make you want to rev the car out because the noise keeps getting better the higher you are in rev band. Great job Turner Motorsport for putting out a great product at a great price!"
    • "katzndogs" - "I too have the turner test pipes. I echo everything that RPOWER said. The sound is great and does truly want to make you rev out the car every time you give it gas. There is an awesome and loud bark/pop when you let off the gas in between shifts (6MT) or after spooling the turbos and then letting off. Down shifts sound more exciting and are noticeable louder. All in all you cannot go wrong with this system. GREAT job Turner!!" 

     

    This part alters or deletes the emissions equipment on your car. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.
    Turner Motorsport
    Part #: TENF8046MCD
    Price: $531.86 (USD) 
    $590.95 (Sale - Save 10%)
    Available
    Free Shipping Free Shipping
    Quantity:   
    AC Schnitzer Sport Rear Silencer - Stainless - F8X M3

    The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

    This item fits the following BMWs: 
    2016+ F8X BMW M3

    AC Schnitzer
    Part #: 1812282532
    Price: $3595.00 (USD) 
    Direct Ship
    Quantity:   
    AFE Exhaust 2.5in Race Pipe -  E9x M3 2007-2013

    The MACH Force XP Race Pipe for the BMW E90, E92 and E93 M3 produced 27 horsepower and 50 lbs. x ft. of torque. This exhaust race pipe is constructed from TIG-welded, 2-1/2" mandrel bent, 304 stainless steel tubing. It uses dual, high flow, 300 cell catalytic converters for maximum flow providing an astonishing low end torque improvement. While developing this system, we ensured that this aFe Race Pipe not only increased performance but delivered a powerful and aggressive tone. Incorporated is an X-Pipe balance tube, which equalizes and evenly distributes exhaust pulses for increased performance across the power band. Dual resonators are also used to absorb high pitch sound decibels, minimizing exhaust drone. This race pipe can be used with the OE muffler or aFe cat-back exhaust systems (part numbers 49-36311-P, 49-36311-C, 49-36312-P, 49-36312-C, 49-36304 and 49-36305). This race pipe requires no modifications and uses all factory hanger locations for a hassle free installation.
     

    Note: This is a "Race Only" product used solely for competition. It's use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization. Any other use including recreational off-road use could be in violation of local, state and federal laws.


     
    All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.
     

    Retains Factory O2 Sensors: 

    This race pipe retains all factory o2 sensors for a OE like, hassle free installation.
     

    Dual High Flow Catalytic Converters:

    The semi-metallic catalyst is designed for maximum surface area and flow and prevents the check engine light from emitting.
     

    X-Pipe Balance Tube:

    An X-pipe balance tube is used to equalize and evenly distribute exhaust pulses which minimizes exhaust drone and increases flow and performance.
     

    Dual High-Flow Resonators:

    Dual high-flow resonators are used to absorb high pitch sound decibels, minimizing exhaust drone.
     

    Simple Installation:

    All systems use factory mounting locations providing stability and hassle-free installation
     

    This part alters or deletes the emissions equipment on your car. Because of this, we require a waiver of emissions compliance to be signed and sent in to Turner Motorsport. You can download the waiver here.

     

    AFE
    Part #: 49-36321KT
    Price: $1709.10 (USD) 
    $1899.00 (Sale - Save 10%)
    Direct Ship
    Quantity:   
    AC Schnitzer
    Part #: 1812230348
    Price: $2495.00 (USD) 
    Direct Ship
    Quantity:   
    AFE Mach Force-Xp Axle-Back Exhaust w/ Gloss Black Tips - F30 340i, F36 440i Gran Coupe

    High flow exhaust system directly from aFe, one of the top after market performance manufacturers. This new MACH Force XP Axle-back exhaust system is for the 2016+ BMW 340i F30 and F36 440i Gran Coupe with the new N58 3.0L turbo engine. This exhaust system is constructed from 3.0” mandrel bent stainless steel and is hand TIG-welded. The system uses a high flow transverse muffler with 3" diameter tubing which improves performance across the power band while maintaining a great tone. To finish off this exhaust are dual double wall resonated angle cut gloss black 304 stainless steel tips. The factory actuator drive is retained with the aFe exhaust so that a check engine light does not occur. This exhaust uses all factory hanger locations for a hassle free installation. No modifications necessary.

    Simple Installation:
    All systems use factory mounting locations providing stability and hassle-free installation.

    Leak-Free Seal:
    High quality band clamps are used for a complete 360 degree sealing surface.

    Aggressive Sound:
    A free-flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

    Product Features:

    • Constructed from 100% hand TIG-welded, 3" to 2-1/2" mandrel bent, brushed finished 304 stainless steel tubing
    • Includes a factory style exhaust valve
    • Utilizes a unique high flow, transverse muffler with a high-temp powder-coated black finish
    • Includes quad 4" diameter, gloss black, 304 stainless steel tips
    • Uses all factory hanger locations for a hassle-free installation

    Fits the Following BMW's:
    2016+ F30 BMW 340i B58
    2017 F36 BMW 440i B58

    AFE
    Part #: 49-36335-B
    Price: $1259.10 (USD) 
    $1399.00 (Sale - Save 10%)
    Direct Ship
    Free Shipping Free Shipping
    Quantity:   
    AC Schnitzer Sport Rear Silencer - Black - F85 F86

    The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included. 

    This item fits the following BMWs: 
    2015+ F85 BMW X5
    2015+ F86 BMW X6

    AC Schnitzer
    Part #: 18122867229
    Price: $4395.00 (USD) 
    Direct Ship
    Quantity:   
    AC Schnitzer Exhaust system - F22 F23 M235

    The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

    This item fits the following BMWs: 
    2014+ F22 BMW M235i, M235i xDrive - Coupe
    2014+ F23 BMW M235i, M235i xDrive - Convertible

    AC Schnitzer
    Part #: 1812222343
    Price: $2095.00 (USD) 
    Direct Ship
    Quantity:   
    AC Schnitzer Sport Rear Silencer - Black - F32 F36 430

    The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

    This item fits the following BMWs: 
    2016+ F32 BMW 430i, 430i xDrive

    2016+ F36 BMW 430i, 430i xDrive

    AC Schnitzer
    Part #: 18122301529
    Price: $2195.00 (USD) 
    Direct Ship
    Quantity:   
    AFE Exhaust - Cat-Back - E82 135i 2008-2013 with Polished Tips This awesome Mach Force XP Cat-back exhaust system produces 11.5 horsepower and 9.5 lbs. x ft. of torque. The Mach Force XP exhaust system is constructed of mandrel bent, polished 304 stainless steel tubing and uses all factory mounting locations for an easy 1hr install time with no cutting or drilling required. This system uses a unique 3" resonance chamber to cancel high frequency sound waves producing an aggressive tone on throttle with a smooth sound at cruising speeds. The elimination of the muffler produces a weight savings of 15lbs. This system comes with a stunning polished 304 stainless steel dual tip to finish off your 135i right.

    All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.
    AFE
    Part #: 49-36302-P
    Price: $580.50 (USD) 
    $645.00 (Sale - Save 10%)
    Direct Ship
    Quantity:   
    AC Schnitzer Racing Rear Silencer - F32 430

    The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

    This item fits the following BMWs: 
    2016+ F32 BMW 430i 430i xDrive 
     

    AC Schnitzer
    Part #: 1812230151
    Price: $2095.00 (USD) 
    Direct Ship
    Quantity:   
    Genuine BMW Performance Exhaust System for E92/E93 328i, 328Xi This is a factory BMW Performance exhaust for the 2007-2013 E92/E93 328i, 328Xi Coupe & Convertibles. This is a factory BMW accessory so it fits great, looks and sounds phenomenal, and is exceptional quality. The sound is mildly more aggressive than the stock exhaust with a slightly more throaty note. This exhaust will waken up the stock 328 personality with a better sound and improved flow. If you feel the stock exhaust is just TOO quiet this is a great option without going overboard. To quote one user, "It feels much different than a stock 328i. Quiet enough to sound classy, and a clean sporty growl when you rev it up."

    This exhaust is a two-piece system that includes the rear muffler and center resonator. On some models you will need to cut the stock exhaust after the resonator to install this; other models are already a two-piece system. A BMW factory exhaust clamp is included to mount to the factory cat section. We also recommend using the exhaust sealing paste to ensure a leak-free install.

    This item fits the following BMWs:
    2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
    2007-2013 E93 BMW 328i - Convertible
    Genuine BMW
    Part #: 18102208794
    Price: $1062.84 (USD) 
    Ships in 4 days
    Free Shipping Free Shipping
    Quantity:   
    BMW M Performance Exhaust - F12 640i, F06 640i Gran Coupe This is a factory BMW M Performance exhaust for the 2011+ F12 640i and F06 640i Gran Coupe. This is a factory BMW accessory so it fits great, looks and sounds phenomenal, and is exceptional quality. The sound is mildly more aggressive than the stock exhaust with a slightly more throaty note. This exhaust will waken up the stock 640i personality with a better sound and improved flow. If you feel the stock exhaust is just TOO quiet this is a great option without going overboard.

    This exhaust system includes both the left and right rear mufflers (18302354363), exhaust tips (18302354364) and hardware.

    This item fits the following BMWs:
    2012+ F12 BMW 640i 640i xDrive
    2013+ F06 BMW 640i Gran Coupe 640i xDrive Gran Coupe
    Genuine BMW
    Part #: 18302354363
    Price: $1480.52 (USD) 
    Ships in 4 days
    Free Shipping Free Shipping
    Innotech Titanium Valvetronic Exhaust System - F10 M5

    For car enthusiasts, one of the key aspects to your car is the sound. That being said, in can be very difficult to find the right exhaust that gives you the right note. Sometimes too loud, other times too quiet and just not always what you want. Now, you no longer have to choose between loud or quiet thanks to Innotech Performance (iPE). They have created and exhaust system that gives you the perfect blend of performance and sound while giving you control at your fingertips. 

    Innotech takes pride in becoming an industry leader in the high performance exhaust community. They've reached this feet by specializing in valvetronic exhaust systems. What is valvetronic? Valvetronic is the term for valve-controlled exhaust technology that delivers power and control to the driver’s seat. Operated by a remote control, these systems have 3 different settings: on, off, auto. With the system set to on, the valves are fully open for the best performance and sound. When set to off, the valves close, resulting in significantly reduced sound. The final setting is off, which may be the best option for most. The system detects RPM and fuel pedal signal and adjusts the valve accordingly for the ultimate driving experience. 

    Each part of the exhaust system is individually designed to fit it's application perfectly. The unique designs overcome the limits set by the stock exhaust, so that performance, sound, and driving pleasure can be increased dramatically.

    Kit Includes:

    • Front pipe
    • X-pipe
    • Valvetronic Muffler
    • Quad Polished tips
    • Remote Control Kit
    • Full Titanium construction for light weight and unrivaled performance
    Innotech
    Part #: BM011Ti
    Price: $7500.00 (USD) 
    Direct Ship
    Quantity:   
    AC Schnitzer Racing Rear Silencer - F3X 335 435

    The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included..

    This item fits the following BMWs: 
    2014+ F30 BMW 335i 335i xDrive
    2014+ F32 F36 BMW 435i 435i xDrive - Coupe and Gran Coupe

    AC Schnitzer
    Part #: 1812230346
    Price: $2495.00 (USD) 
    Direct Ship
    Quantity:   
    O2 Sensor Bung and Plug Made in the USA O2 Sensor Bung and plug. This weld-in bung allows an O2 sensor to be screwed into your exhaust system. It's required for custom exhaust systems, and is also useful for air/fuel ratio measurements when dyno testing. A threaded plug is included to cap off when not in use. Bung and cap/plug are both 100% stainless steel. The bung and plug are also available separately (in case you don't need both). Simply choose your option below.
      TMS Oxygen Sensor Bung Specs:
    1. Material 304 stainless steel
    2. 1.00" / 25.4mm OD
    3. 0.50" / 12.7mm Tall
    4. Thread size and pitch M18x1.5
      TMS O2 Sensor Plug & Crush Ring Specs
    1. Material 304 stainless steel
    2. 10mm female hex for install and removal
    3. Thread size and pitch M18x1.5
    4. Copper Crush Ring for leak free installation
       Install Tips
    • Locate bung as close to engine a possible, without exceeding the maximum operating temperature for the O2 sensor. The suggested location is just down-stream of the merge-collector on each bank of cylinders.
    • Sensors located after upstream exhaust system leaks or too close to exhaust outlets are susceptible to poor readings or influence of ambient air
    • O2 Sensors exposed to exhaust gasses with too high amount of un-burnt fuel can lead to misleading readings. A possible lean reading.
    • Locate sensor/bung 90° to exhaust gas stream.
    • Locate sensor/bung in tube with a minimum of 10° up angel to prevent liquid build up in sensor element.
    • Use stainless steel welding wire or rod when installing bung.
    • Do not have bung plug or a oxygen sensor installed when welding bung in place.
    • Welding can distort the bung so it is recommended you chase/tap the threads of the bung after welding.
    • When installing O2 sensor or plug, use an O2 sensor compatible high temperature resistant grease on the threads.
    • Use tightening torque suggested by O2 senor manufacturer.
    Packaged by Turner
    Part #: TEN9949O2S
    Price: $5.10 (USD) 
    $6 (Sale - Save 15%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    aFe Axle-Back MACH Force Exhaust with Carbon Fiber Tips  --  F8X M3/M4

    aFe MACH Force exhaust features two transverse sport mufflers that meet to the stock factory center resonator. This system is constructed from 100% TIG-welded, 2-1/2" mandrel bent 304 stainless steel tubing for maximum flow. The aFe mufflers provide a mildly aggressive and sporty sound without being excessively loud (bypass valves are not used with this system). All factory mounting locations are retained to provide a simple, hassle-free installation with no modifications necessary.

    Features:

    • Carbon fiber tips
    • Constructed from 100% TIG-welded, 2-1/2" mandrel bent 304 stainless steel tubing 
    • Includes unique dual high flow, transverse mufflers with a high-temp powder-coated black finish
    • Includes quad 3-1/2" diameter, carbon fiber tips with CNC-machined, laser-etched inserts
    • Uses all factory hanger locations for a hassle-free installation
    AFE
    Part #: 49-36324-C
    Price: $2069.10 (USD) 
    $2299.00 (Sale - Save 10%)
    Direct Ship
    Quantity:   
    Active Autowerke Signature Exhaust Muffler Generation 2 - E82 135i

    After months of testing this system with various size piping AA's engineering team decided that 3.5” piping is the best suited size for a true free flowing design on the BMW 135i exhaust. The increase in piping size decreases back pressure allowing the BMW 135i’s twin turbo to spool even faster resulting in increased horsepower and torque throughout the entire RPM range. This was the design feature of the GEN 1 E82.

    However, when a set of Down Pipe was installed, some customers experienced a higher sound decibel tone with the total package.

    What they created was the development where no increase in the decibel level was noted, even with the addition of a set of down pipes. The solution is the creation of the GEN 2 Signature Rear Exhaust. 

    The 3.50" stainless steel exhaust tubing was still maintained to keep the power, but the addition of a High Flow sound regulating muffler was incorporated. This design showed no decrease in power and successfully lowering the decibels.   

    Manufactured from 100% polished 304 stainless steel this bolt on system is well suited for the BMW E82 135i owner who wants a louder than stock but quieter than gen 1 exhaust with down pipes.

    FEATURES:

    • Full 304 stainless steel with hi-polish finish 
    • 3.50" Mandrel Bent Piping for Optimum Exhaust Flow
    • High Flow sound regulating muffler 
    • Dual 80 mm Active Autowerke Signature tips mounted staggered 
    • Measured 5-7+ horsepower increase at the rear wheels on the Active in-house chassis  dyno 
    • Designed to use existing factory mounts and hardware
    • Full adjustable mounting positions 
    • True Bolt On System
    Active Autowerke
    Part #: 11-024
    Price: $649.00 (USD) 
    Direct Ship
    Quantity:   
    AFE Twisted Steel Cat-Less Downpipes - E9x 335i E82 135i 2008-2010 (N54)

    The aFe Power Twisted Steel, cat-delete, race down-pipes eliminate the catalytic converters for maximum exhaust flow for the popular BMW 1 series and 3 series with the N54 twin turbo motor. In recent dyno testing, these race pipes produced 17 horsepower and 32 x ft. torque over the factory down-pipes. These high performance race pipes are constructed out of lightweight, TIG-welded, 3 inch, brushed finish, 304 stainless steel and use thick 3/8 inch 304 stainless steel flanges for a leak-free seal and a factory fit.

    All aFe exhaust systems are engineered and manufactured in the Corona, California manufacturing facility.

    Tig-Welded:
    100% TIG-Welded by certified craftsmen for race proven strength and durability. TIG-Welding provides the strongest welds reducing stress cracks.

    Factory O2 Sensor Locations:
    These down-pipes use factory mounting locations for the O2 sensors.

    Hassle-Free Installation:
    All hardware and brackets are included for a hassle-free installation.

    Note: This is a "Race Only" product used solely for competition. Its use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization. Any other use including recreational off-road use could be in violation of local, state and federal laws. A check engine light will emit and aFe recommends using a programmer but it is not necessary.

    This part alters or deletes the emissions equipment on your car, and may not meet emissions standards in all states. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.

    Also Fits:
    BMW 335iS 11-12 L6-3.0L (tt) N54
    1 Series M Coupé (E82) 11-12 L6-3.0L (tt) N54

    AFE
    Part #: 48-36301-1KT
    Price: $629.10 (USD) 
    $699.00 (Sale - Save 10%)
    Direct Ship
    Free Shipping Free Shipping
    Quantity:   
    AFE Exhaust - Axle-Back - F30 335i with Polished Tips

    Features:

    • In house testing produced a max gain of +4 horsepower and +5 ft. lbs. of torque verified by our in house dyno
    • Constructed from 100% Hand TIG-welded, brushed finish, mandrel-bent, 304 stainless steel
    • Utilizes 3" tubing which merges into 2-1/2" tubing for maximum flow
    • Includes dual aFe laser etched, 3.5" polished 304 stainless steel tips
    • Dual free-flowing transverse mufflers are used to absorb high pitch tones producing a powerful sound
    • Aggressive sound when shifting with NO DRONE!

      Introducing the new aFe Power MACH Force XP cat-back exhaust system for the 12-14 BMW 335i F30 with the N55 turbo engine. In recent testing, this system produced +4 horsepower and +5 lbs. x ft. of torque. The system was designed and engineered with the perfect tube diameter and lengths, ultimately maximizing performance across the power band while maintaining a great tone with an aggressive sound during shifting. Countless hours of R&D was used to ensure the perfect decibel level without compromising performance with NO DRONE! The exhaust is constructed from 3" TIG-welded, brushed finish, mandrel-bent, 304 stainless steel. To finish off this exhaust are dual, aFe laser etched, 3.5" polished 304 stainless steel tips. This exhaust uses all factory hanger locations. 

      True Mitered Merge Collector
      Eliminates dead space that can cause turbulence and hinder flow that formed collectors are prone to produce.

      Aggressive Sound:
      This system includes dual free-flowing transverse mufflers to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque while eliminating drone.

      304 Stainless Steel Tubing:
      High grade stainless tubing with a uniform brushed finish provides a beautiful look and high resistance to corrosion.

      Mandrel Bent Tubing: 
      This performance exhaust is constructed of 3" merging into 2-1/2" mandrel bent, 304 stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower and torque.

      Simple Installation:
      All systems use factory mounting locations providing stability and hassle-free installation.

      Leak-Free Seal:
      High quality band clamps are used for a complete 360 degree sealing surface.

      Also Fits: BMW 435i/ix (F32/33) 13-15 L6-3.0L (t)

      Note: Does not use OEM exhaust valve.

      All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.
    AFE
    Part #: 49-36325-P
    Price: $1169.10 (USD) 
    $1299.00 (Sale - Save 10%)
    Direct Ship
    Quantity:   
    AC Schnitzer Racing Rear Silencer - F30 340

    The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

    This item fits the following BMWs: 
    2016+ F30 BMW 340i, 340i xDrive

    AC Schnitzer
    Part #: 1812230446
    Price: $2095.00 (USD) 
    Direct Ship
    Quantity:   
    AFE Twisted Steel Downpipe Without Cats - E9x 335i, E82 135i (N55)

    Features:

    • In house testing produced a max gain of +14 horsepower and +39 ft. lbs. of torque verified by our in house dyno (results from the "Race" version down pipe)
    • A unique 3.5" to 4" stepped design is used to increase exhaust velocity
    • Constructed of durable mandrel bent brushed 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking
    • 100% hand TIG-Welded by certified craftsmen for race proven strength and durability
    • Designed using a resonance chamber to help reduce the in-cab resonance found with other non-catted down pipes





       
    •  
    •  
    • aFe power introduces an all new Elite Twisted Steel "Race Only" down pipe for the BMW 335i (E9x) /135i (E82/88) 11-13 with L6-3.0L (t) N55 engine. This race down pipe uses a unique resonance chamber to capture sound waves and minimize in-cab resonance producing an aggressive tone on throttle with a smooth sound at cruising speeds without effecting performance. In recent testing, the race version down pipe produced +14 horsepower and +39 lbs. x ft. of torque. The high-flowing down pipe is designed using mandrel-bent, 304 stainless steel tubing for optimum flow resulting in added horse power and torque. The down pipe is 100% hand TIG-Welded and uses a 3-1/2" into 4" stepped design that increases exhaust velocity and eliminates low pressure drops which helps to scavenge the exhaust for increased intake charge and more power..

      Resonance Chamber: 
      This down pipe is designed using a resonance chamber to help reduce the in-cab resonance found with other non-catted down pipes.

      3-1/2" to 4" Stepped Design:
      A unique 3.5" to 4" stepped design, is used to increase exhaust velocity and increase usable torque. This means more aggressive throttle response and increased passing power.

      TIG-Welded: 
      100% TIG-Welded by certified craftsmen for race proven strength and durability. TIG-Welding provides the strongest welds reducing stress cracks.

      Brushed 304 SS Construction:
      This down pipe is constructed of durable mandrel bent brushed 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking.

      Hassle-Free Installation:
      All hardware and brackets are included for a hassle-free installation. This unit also comes with a 2-year warranty.

      Also Fits:
      BMW 135i (E82/88) 10-14 L6-3.0L (t) N55
      BMW 335i/xi (E90/92) 09-13 L6-3.0L (t) N55
      BMW X1 35xi (E84) 09-15 L6-3.0L (t) N55

      aFe down pipes are engineered and manufactured in our Corona, California manufacturing facility.

      Note: This is a "Race Only" product used solely for competition. Its use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization. Any other use including recreational off-road use could be in violation of local, state and federal laws. This system is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.

    This part alters or deletes the emissions equipment on your car, and may not meet emissions standards in all states. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.

     

    AFE
    Part #: 48-36302-hnKT
    Price: $539.10 (USD) 
    $599.00 (Sale - Save 10%)
    Direct Ship
    Free Shipping Free Shipping
    Quantity:   
    AC Schnitzer
    Part #: 18122873109
    Price: $2595.00 (USD) 
    Direct Ship
    Quantity:   
    F8X M3/M4 AFE Twisted Steel Racing Cat-Less Downpipes

    aFe offers two downpipe options for the F80 M3/F82 M4 -- this cat-less straight pipe for racing/off-road use and downpipes with sport 200cpsi catalytic converters. One of the keys to making power from the twin-turbo S55 is eliminating restrictions like the factory catalytic converters. The M3/M4 has four cats - 2 in the downpipes and 2 in the center section of the exhaust. These straight pipes will eliminate the factory cats in the downpipes, giving much improved flow thanks to zero restriction and reducing stress on the turbochargers. With no main cats and better flow, the exhaust is quite a bit louder as well (a common complaint is the stock exhaust is too quiet).

    aFe manufactures these downpipes from 304 stainless steel in their California facility. They are committed to offering a product of superior quality with 3" mandrel-bent tubing, TIG welds, and laser-cut flanges. This M3/M4 DP will mount to the turbos with OE-style v-band clamps and to the stock or aftermarket exhaust system (check out aFe's complete exhaust system here) with OE-style flanges. All O2 sensors fit in factory locations.

    Because the main cats are deleted, the check engine light and fault code for increased emissions will appear. Special software will be required to eliminate the check engine light.

    Features:

    • In testing this system resulted in gains up to +21 horsepower and +23 lbs. x ft. of torque
    • Constructed of 3" mandrel-bent, 304 stainless steel tubing
    • Retains Factory O2 Sensor Locations
    • 100% TIG-Welded
    • Thick flanges to ensure a leak-free seal
    • Includes high quality, O.E. style, V-band turbo flanges

    Note: This system is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicles.

    This part alters or deletes the emissions equipment on your car, and may not meet emissions standards in all states. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.

    This part alters or deletes the emissions equipment on your car. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.

     

    AFE
    Part #: 48-36313KT
    Price: $1079.10 (USD) 
    $1199.00 (Sale - Save 10%)
    Direct Ship
    Quantity:   
    AC Schnitzer Racing Rear Silencer - F3X 335 435

    The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

    This item fits the following BMWs: 
    2016+ F30 BMW 335i, 335i xDrive 
    2016+ F32 F36 BMW 435i, 435i xDrive - Coupe and Gran Coupe

    AC Schnitzer
    Part #: 1812230336
    Price: $2495.00 (USD) 
    Direct Ship
    Quantity:   
    BMW M Performance Exhaust - F30 335i 335i xDrive - F32 435i 435i xDrive This is a factory BMW M Performance exhaust for the 2013+ F30 335i, 335xi, F32 435i & 435i xDrive Coupe. This is a factory BMW accessory so it fits great, looks and sounds phenomenal, and is exceptional quality. The sound is mildly more aggressive than the stock exhaust with a slightly more throaty note. This exhaust will waken up the stock 435i personality with a better sound and improved flow. If you feel the stock exhaust is just TOO quiet this is a great option without going overboard. A unique high-tech look is provided by two either chrome-plated or Carbon fiber 80mm exhaust tips which are laser engraved with the ///M logo.

    This exhaust system includes the rear muffler (18302354340). Please select exhaust tip options below. Chrome - (18302354364) Carbon Fiber (18302355889) . A BMW factory exhaust clamp is included to mount to the factory cat section.

    This item fits the following BMWs:
    2012+ F30 BMW 335i 335i xDrive - Sedan
    2013+ F32 BMW 435i 435i xDrive - Coupe
    Genuine BMW
    Part #: 18302354340
    Price: $1180.81 (USD) 
    Ships in 4 days
    Free Shipping Free Shipping
    Innotech Valvetronic exhaust system - F32 435i

    For car enthusiasts, one of the key aspects to your car is the sound. That being said, in can be very difficult to find the right exhaust that gives you the right note. Sometimes too loud, other times too quiet and just not always what you want. Now, you no longer have to choose between loud or quiet thanks to Innotech Performance (iPE). They have created and exhaust system that gives you the perfect blend of performance and sound while giving you control at your fingertips. 

    Innotech takes pride in becoming an industry leader in the high performance exhaust community. They've reached this feet by specializing in valvetronic exhaust systems. What is valvetronic? Valvetronic is the term for valve-controlled exhaust technology that delivers power and control to the driver’s seat. Operated by a remote control, these systems have 3 different settings: on, off, auto. With the system set to on, the valves are fully open for the best performance and sound. When set to off, the valves close, resulting in significantly reduced sound. The final setting is off, which may be the best option for most. The system detects RPM and fuel pedal signal and adjusts the valve accordingly for the ultimate driving experience. 

    Each part of the exhaust system is individually designed to fit it's application perfectly. The unique designs overcome the limits set by the stock exhaust, so that performance, sound, and driving pleasure can be increased dramatically.

    Kit Includes:

    • Front pipe
    • X-pipe
    • Valvetronic Muffler
    • Dual Polished tips
    • Remote Control Kit
    Innotech
    Part #: BM021
    Price: $3277.50 (USD) 
    $3450.00 (5% off MSRP)
    Direct Ship
    Quantity:   
    F8X M3/M4 aFe Axle-Back MACH Force Exhaust with Polished Tips

    aFe MACH Force exhaust features two transverse sport mufflers that meet to the stock factory center resonator. This system is constructed from 100% TIG-welded, 2-1/2" mandrel bent 304 stainless steel tubing for maximum flow. The aFe mufflers provide a mildly aggressive and sporty sound without being excessively loud (bypass valves are not used with this system). All factory mounting locations are retained to provide a simple, hassle-free installation with no modifications necessary.

    Features:

    • Polished stainless steel tips
    • Constructed from 100% TIG-welded, 2-1/2" mandrel bent 304 stainless steel tubing 
    • Includes unique dual high flow, transverse mufflers with a high-temp powder-coated black finish
    • Includes quad 3-1/2" diameter, carbon fiber tips with CNC-machined, laser-etched inserts
    • Uses all factory hanger locations for a hassle-free installation
    AFE
    Part #: 49-36324-P
    Price: $1619.10 (USD) 
    $1799.00 (Sale - Save 10%)
    Direct Ship
    Quantity:   
    AC Schnitzer Sport Rear Silencer - Black - F3X 328 428

    The AC Schnitzer muffler is designed to compliment your car and not overpower the driver and passengers with harsh tones. Schnitzer engineers their exhaust to sound great and be a natural fit to the character of the car while also producing more power and torque. Including new exhaust tips to fill out the rear valence. There's also now drone, which means smooth sound throughout the RPM range. AC Schnitzer is sure only to use the highest quality components in their systems for maximum corrosion protection and durability. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

    This item fits the following BMWs: 
    2014+ F30 BMW 328i 328i xDrive
    2014+ F32 F36 BMW 428i, 428i xDrive - Coupe and Gran Coupe

    AC Schnitzer
    Part #: 18122301429
    Price: $1995.00 (USD) 
    Direct Ship
    Quantity:   
    F3X 335/435 3D Design Sport Muffler - Quad Tip

    This sport muffler gives your BMW a pleasant performance exhaust note and is the perfect complement to your new 3D Design rear diffuser. It installs in place of the stock muffler and will not impact vehicle emissions equipment, making it an ideal choice for a daily-driven car where looks & performance are a concern. 

    3D Design is focused on high-quality styling components that allow you to personalize the look of your BMW & remain true to the car's original form. Inspired by European tuning trends & Japan's unique VIP tuning style, their wide range of lips, diffusers, side skirts, & spoilers are made from high-quality urethane or super light, super strong prepreg dry carbon and install easily to your factory bumpers & skirts to offer an understated, aggressive performance look.

    3D Design
    Part #: 4101-23015
    Price: $3950.00 (USD) 
    Direct Ship
    Quantity:   
    Innotech Valvetronic exhaust system - F30 335i

    For car enthusiasts, one of the key aspects to your car is the sound. That being said, in can be very difficult to find the right exhaust that gives you the right note. Sometimes too loud, other times too quiet and just not always what you want. Now, you no longer have to choose between loud or quiet thanks to Innotech Performance (iPE). They have created and exhaust system that gives you the perfect blend of performance and sound while giving you control at your fingertips. 

    Innotech takes pride in becoming an industry leader in the high performance exhaust community. They've reached this feet by specializing in valvetronic exhaust systems. What is valvetronic? Valvetronic is the term for valve-controlled exhaust technology that delivers power and control to the driver’s seat. Operated by a remote control, these systems have 3 different settings: on, off, auto. With the system set to on, the valves are fully open for the best performance and sound. When set to off, the valves close, resulting in significantly reduced sound. The final setting is off, which may be the best option for most. The system detects RPM and fuel pedal signal and adjusts the valve accordingly for the ultimate driving experience. 

    Each part of the exhaust system is individually designed to fit it's application perfectly. The unique designs overcome the limits set by the stock exhaust, so that performance, sound, and driving pleasure can be increased dramatically.

    Kit Includes:

    • Front pipe
    • Y-pipe
    • Valvetronic Muffler
    • Dual Polished tips
    • Remote Control Kit
    Innotech
    Part #: BM019
    Price: $3182.50 (USD) 
    $3350.00 (5% off MSRP)
    Direct Ship
    Quantity:   
    Get notified about money saving
    specials & deals for your BMW
    enter your email address
  • 22 years of BMW Tuning.
  • Award winning service.
  • 10,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook




    • 1-800-280-6966
      Mon-Thur 9am-6pm ET, Fri 9am-5pm ET

      • © TurnerMotorsport.com 1993-2017. All Rights Reserved.