Cone filter and cold-air intake kits flow great amounts of air through their cotton or foam filters. But to keep contaminants, dirt, debris, and dust out of the engine the filter must be oiled. The oil helps grab the finer particles and prevents them from entering the engine. The oil also works to keep the filter material pliable because a dry filter will eventually crack and break apart. Cone filters must also be cleaned at least once a year. If it's full of debris or an oily sludge it will not flow nearly as much air and any power gains you had will be significantly reduced. Air filters must be cleaned with their own proprietary brands of cleaner. Mixing cleaning and re-oiling agents is not recommended by each filter manufacturer. aFe filter cleaning: click here. K&N filter cleaning: click here. ITG filter cleaning: click here.
Any time you take the filter out for cleaning you should also clean the film in your HFM / mass air sensor (if equipped).
This eco-friendly air filter cleaner is for the aFe Pro Dry S performance air filter. Simply spray on and wash off and your Pro Dry S air filter is good to go. Please follow the instrucctions with the kit and you will have a lifetime of horsepower.
Cleaning and re-oiling your K&N filter will prolong its life and maintain K&N's performance adavantage. You should clean your filter every year with water and K&N's cleaning solution and re-oil the filter every two years. K&N air fitlers come pre-oiled.
Don't use harsh solvents like gasoline to clean your ITG on your Eurosport/Conforti intake kit (or similar foam filter element). This product is all you need to maintain your ITG foam filter, and is recommend for use with all Conforti Cold-Air Intake Kits.
When cleaning an ITG foam filter, ITG recommends using warm water and a mild detergent (simple dish soap is fine). Strong detergents and solvents can harm the foam, and cause the filter to break down. Once dirt, dust and debris are rinsed out of the filter, it should be re-oiled to ensure proper function of the filter. ITG recommends No-Toil filter oil, as it is safe to the foam filter media, and is completely waterproof. Drive with more peace of mind through heavy rain and puddles.
Please note, as this product is an aerosol, it MUST BE SHIPPED BY UPS GROUND. Sorry, this can not be shipped outside of the US/Canda.
Bring your aFe filter back to life with a Restore kit from aFe. Included is filter cleaner & replacement oil. These air filter oils is designed to not harm MAF sensors, while allowing the filter to catch as much debris as possible.