click to Chat Live
Contact YouTube Blog Twitter facebook Turner Motorsport on Instagram
1-800-280-6966
 |   Login
  • 0
 |   Login
Shopping Cart (0) Wishlist
Contact

(0) item(s) in your Shopping Cart
Home
Categories
Specials Gifts & Clothing
  1. Genuine BMW Accessories
  2. Genuine BMW Clothing
  3. Turner Shirts Hats and Gear
  4. Gifts under $25
  5. Gifts under $50
  6. Gifts under $100
  7. Gifts over $100
  8. Gift Certificates
  9. Stocking Stuffers
  10. Gift Packages
Brakes
  1. Brake Overhaul Packages
  2. Brake Pads
  3. Brake Pad Sensors
  4. Brake Rotors
  5. StopTech Big Brake Kits
  6. Brembo Big Brake Kits
  7. Stainless Steel Brake Lines
  8. Brake Fluid
  9. Brake Calipers
  10. Caliper Rebuild Kits
  11. Parking Brake Parts
  12. Brake Master Cylinders
  13. ABS/DSC System Parts
  14. Brake Cooling Ducts & Backing Plates
  15. Brake Pads - Brembo GT BBK Calipers
  16. Brake Pads - StopTech BBK Calipers
Car Care & Accessories
  1. Car Covers
  2. Wheel & Tire Cleaning
  3. Wax, Polish and Cleaning Supplies
  4. Detailing Gear
  5. Leather & Plastic Care
  6. Car Cleaning Supplies
  7. Chassis Paint, Coatings, Sealants, and Rust Conversion
Drivetrain
  1. Differential and Gearing Upgrades
  2. Differential Mounts and Upgrades
  3. OEM Clutch Kits & Clutch Parts
  4. Performance Clutch Kits & Parts
  5. Lightweight Aluminum Flywheel Upgrades
  6. Stock OEM Dual Mass Flywheels
  7. Stainless Steel Clutch Lines
  8. Clutch Parts
  9. UUC Short Shift Kits
  10. Axle Shafts
  11. Driveshafts
  12. B&M Short Shifters
  13. Performance Short Shift Kits
  14. UUC DSSR - Double Sheer Selector Rod
  15. Drivershaft Center Support Bearings
  16. Flex Discs & Guibos
  17. Transmission Mounts
  18. Transmission Parts
Engine Chips
  1. Performance Chips, 1986-1995 Models
  2. Shark Injector Performance Software, 1996-2005 Models
  3. Performance Flash Software, 2005+ Models
  4. Sprint Booster Drive-by-Wire Module
  5. Stand-Alone Engine Management
Engine Parts
  1. Engine Performance Packages
  2. Cam Sprockets & Gears
  3. Water Pumps
  4. Thermostats
  5. Radiators & Cooling System Overhaul Kits
  6. Oil Pan Baffles
  7. Radiator Hoses, Cooling Hoses, & Hose Sets
  8. Engine Fans & Fan Clutches
  9. Underdrive Power Pulleys
  10. Camshafts
  11. Schrick Performance Camshafts
  12. E30 M3 S14 Engine Parts
  13. External Engine Parts
  14. Drive Belts & V-Belts
  15. Gaskets, Gasket Sets, Seals, & O-Rings
  16. Factory-Spec Replacement Turbos and Kits
  17. Crankcase Vent, PCV, and Oil Separator Systems
  18. Turbo Upgrades and Kits
  19. Motor Mounts
  20. Electrical Sensors, Switches, & Relays
  21. Ignition Parts
  22. Alternator & Alternator Parts
  23. Starter Motors & Starter Parts
  24. Fuel System Parts
  25. Internal Engine Parts
  26. Cylinder Head Parts & Head Bolts
  27. VANOS Units & Parts
  28. Rod Bearing Kits
  29. Oil Coolers & Oil Cooler Parts
Exhaust
  1. Supersprint Performance Exhaust Systems
  2. Performance Headers & Downpipes
  3. Turner Motorsport Performance Exhaust
  4. Akrapovic Performance Exhaust Systems
  5. Borla Performance Exhaust Systems
  6. Corsa Performance Exhaust Systems
  7. Dinan Free Flow Exhaust Systems
  8. Performance Exhaust Systems
  9. OEM Replacement Mufflers and Exhaust Systems
  10. Exhaust System Upgrades
  11. Exhaust Muffler Tips
  12. Catalytic Converters
  13. Oxygen Sensor - O2 Sensors
  14. Exhaust Gaskets Hangers and Parts
Exterior / Body
  1. Black Grills
  2. Chrome Grills & Trim
  3. Emblems & Decals for Hood, Trunk, and Wheels
  4. Painted Reflectors
  5. Front Spoilers, Bumper Covers, & Air Dams
  6. Rear Spoilers, Rear Wings, & Aprons
  7. Body Trim Parts & Accessories
  8. Carbon Fiber Trunk Lids
  9. Hood & Trunk Shocks, Struts
  10. License Plate Brackets & License Plate Frames
  11. Mirror Kits & Mirror Parts
  12. Window Regulators & Motors
  13. Wiper Blades, Wiper Pumps, & Wiper Motor Parts
  14. Hood Pins and AeroCatch Latches
  15. Racing Tow Hooks and Tow Straps
  16. Aero & Body Kits
Intake
  1. aFe Cold-Air Intake Kits
  2. Turbos & Active Autowerke Superchargers
  3. Dinan Cold Air Intake Kits
  4. Gruppe M Cold-Air Intake Kits
  5. Performance Intake Kits
  6. aFe Performance Air Filters
  7. K&N Performance Air Filters
  8. Replacement Cone Air Filters (for Cold Air Intakes)
  9. Intake Cleaning & Recharging Kits
  10. Intake Manifold Upgrades
  11. Intake Manifold Components (DISA, Vacuum, CCV, Etc)
  12. BOV, Chargepipe, and Intercooler Upgrade Kits
  13. Mass Air Sensor & Air Flow Meters
  14. Intake Boots & Hoses
  15. Throttle Body Parts
  16. Other Intake Kits
Interior
  1. Floor Mats
  2. Gauge Kits and Data Acquisition
  3. Auxiliary Input Adaptors for BMW
  4. Pedal Sets
  5. Escort Radar Detectors
  6. Factory Steering Wheels
  7. Racing Steering Wheels
  8. Shift Knobs, Shift Boots, & Shift Handles
  9. Seats & Seat Accessories
  10. Seat Belts and Racing Harnesses
  11. Cup Holders and Storage
  12. Carbon Fiber Interior Parts
  13. Door Sill Strips
  14. Heating & Air Conditioning
  15. Interior Switches and Switchgear
  16. Sunshades & Windscreens
  17. Interior Trim & Accessories
Lighting
  1. Euro Clear Turn Signals, Parking Lights, & Tail Lights
  2. Turn Signals / Parking Lights
  3. Angel Eye Headlight Conversions
  4. Bulbs for Headlights, Turn Signals and Tail Lights
  5. Headlights, Headlight Lenses, & Headlight Parts
  6. Fog Lights, Fog Light Lenses, & Fog Light Parts
  7. Tail Lights
  8. Stealth Bulbs
Maintenance
  1. Routine Maintenance & Tune-Up Packages
  2. Oil Filters & Oil Filter Kits
  3. Air Filters
  4. Fuel Filters
  5. Cabin Air Filters, Heppa Filters, & Microfilters
  6. Transmission Filter Kits & Transmission Service Parts
  7. Distributor Caps & Rotors
  8. Ignition Coils
  9. Ignition Wires / Spark Plug Wires
  10. Spark Plugs
  11. Bentley Repair / Service Manuals
  12. Service Reset Tools & Fault Code Readers
  13. Anti-Freeze and Coolant
  14. Engine Oils - Genuine BMW and OEM
  15. Power Steering and Hydraulic Fluids
  16. Transmission and Gear Oil - Genuine BMW and OEM
  17. MOTUL Engine Oil and Gear Lubricants
  18. Red Line Oil & Fluids
  19. Liqui-Moly Oil and Additives
Suspension
  1. Shocks & Struts
  2. H&R Performance Springs
  3. Dinan Performance Springs
  4. H&R Cup Kit Shock & Spring Packages
  5. Spring & Shock Packages
  6. Dinan Coilover Spring Kits
  7. Turner / H&R Height Adjustable Spring Sets
  8. Bilstein PSS PSS9 PSS10 Coil Over Suspensions
  9. H&R Coil Over Suspensions
  10. KW Coil Over Suspensions
  11. ST Suspension Coilover Kits
  12. Turner Motorsport TrackSport Coil-Over Suspension Kits
  13. Turner Motorsport Racing Suspension Kits
  14. Chassis Reinforcement Kits & Parts
  15. Sway Bar Kits
  16. Sway Bar Links & Sway Bar Parts
  17. Camber / Caster Kits
  18. Strut Braces & Stress Bars
  19. Control Arm Replacements & Upgrades
  20. Suspension Bushings & Mounts
  21. Wheel Bearings & Hub Assemblies
  22. Steering Racks & Power Steering Pumps
  23. Tie Rods & Steering Parts
  24. Coil Over Spring Hardware
Wheels
  1. Apex Flow Formed Alloy Wheels
  2. Forgeline Custom Forged Alloy Wheels
  3. HRE FlowForm Performance Alloy Wheels
  4. Vorsteiner Wheels
  5. Rohana Wheels
  6. D Force Flow Formed Alloy Wheels
  7. Dinan Performance Wheels
  8. Original BMW Wheels and Wheel Upgrades
  9. Turner Motorsport Wheel Spacers
  10. ECS Tuning Wheel Spacers
  11. H&R Wheel Spacers
  12. Wheel Bolts, Wheel Studs and Nuts
  13. Wheel Emblems, Caps, and Accessories
  14. High Performance Wheels
Tools
  1. Alignment Tools
  2. Battery Chargers and Tenders
  3. Brake Tools
  4. Clutch Alignment Tools
  5. Coil Over Wrenches
  6. Cylinder Head and VANOS Tools
  7. Fan and Fan Clutch Tools
  8. Fault Code Readers and OBD Scan Tools
  9. Fuel System Tools
  10. Genuine BMW Tool Kits
  11. Oil Service Tools
  12. Sockets
  13. Spark Plug Sockets
  14. Transmission and Differential Tools
  15. Wheel Pin Tools
  16. Workshop Chemicals
Clearance
Choose BMW
BMW 1 Series
  1. (E82) 1-series Coupe 2008+
  2. (E88) 1-series Convertible 2008+
BMW 2 Series
  1. (F22) 2-Series Coupe 2014+
  2. (F23) 2-Series Convertible 2014+
  3. (F87) M2 2016+
BMW 3 Series
  1. (E21) 3-Series 1977-1983
  2. (E30) 3-series 1984-1991
  3. (E30) M3 1988-1991
  4. (E36) 3-series 1992-1999
  5. (E36) M3 1995-1999
  6. (E46) 3-Series 1999-2005
  7. (E46) M3 2001-2006
  8. (E90) 3-Series Sedan 2006-2011
  9. (E90) M3 Sedan 2008-2013
  10. (E91) 3-Series Touring 2006-2013
  11. (E92) 3-Series Coupe 2007-2013
  12. (E92) M3 Coupe 2008-2013
  13. (E93) 3-Series Convertible 2007-2013
  14. (E93) M3 Convertible 2008-2013
  15. (F30) 3-Series Sedan 2012+
  16. (F31) 3-Series Touring 2014+
  17. (F80) M3 2015+
  18. (F34) 3-Series Gran Turismo 2014+
BMW 4 Series
  1. (F32) 4-Series Coupe 2014+
  2. (F33) 4-Series Convertible 2015+
  3. (F34) 4-Series Gran Turismo 2014+
  4. (F82) M4 Coupe 2015+
  5. (F83) M4 Convertible 2015+
  6. (F36) 4-Series Gran Coupe 2015+
BMW 5 Series
  1. (E34) M5 1991-1993
  2. (E39) M5 2000-2003
  3. (E60) M5 2006-2010
  4. (E28) 5-Series 1982-1988
  5. (E34) 5-Series 1989-1995
  6. (E39) 5-Series 1996-2003
  7. (E60) 5-Series Sedan 2004-2010
  8. (E61) 5-Series Touring 2006-2010
  9. (F10) 5-Series 2011+
  10. (G30) 5-Series 2017+
BMW 6 Series
  1. (E24) 6-Series 1977-1989
  2. (E63) 6-Series Coupe 2004-2010
  3. (E64) 6-Series Convertible 2004-2010
  4. (F06) 6-Series Gran Coupe 2013+
  5. (F12) 6-Series Coupe 2011+
  6. (F13) 6-Series Convertible 2011+
BMW 7 Series
  1. (E32) 7-Series 1988-1994
  2. (E38) 7-Series 1995-2001
  3. (E65) 7-Series SWB 2002-2007
  4. (E66) 7-Series LWB 2002-2007
  5. (F01) 7-Series SWB 2009+
  6. (F02) 7-Series LWB 2009+
BMW 8 Series BMW Classics (E9, Bavaria, Isetta, etc)
  1. 2500
  2. 2800
  3. 3.0Si
  4. Bavaria
  5. 2800CS
  6. 3.0CS
  7. 2002
  8. 2002tii
  9. (E12) 528i 1977-1981
  10. (E12) 530i 1975-1978
BMW X Series (SAV)
  1. (E84) X1 Series 2013+
  2. (E83) X3 2004-2010
  3. (F25) X3 2011+
  4. (F26) X4 2015+
  5. (E53) X5 2000-2006
  6. (E70) X5 2007-2013
  7. (F15) X5 2014+
  8. (F85) X5 M 2015+
  9. (E71) X6 2008+
  10. (F16) X6 2015+
  11. (F86) X6 M 2015+
  12. (F48) X1 2016+
  13. (F48) X1 (2016+)
BMW Z Series
  1. (E36/7) Z3 1997-2002
  2. (E85) Z4 M Roadster
  3. (E85/E86/E89) Z4 2003+
  4. (E86) Z4 M Coupe
  5. (E52) Z8 2000-2003
BMW 1600-2002 / tii BMW i Series
  1. (I01) BMW i3 2014+
  2. (I12) BMW i8 2014+
MINI Cooper and Cooper S
Racing
Racing Home Racing News Racing Schedule Racing Photo Gallery
Gallery
Photo Gallery Wallpaper Project Cars
  1. Project i8
  2. Project F80 M3
  3. Turner F82 M4
  4. Turner X5 M
  5. Turner F22 2 Series
  6. Turner F13 M6
  7. Turner F10 M5
  8. Turner F30 335i
  9. Turner E9X M3
  10. Turner E92 335i
  11. Turner E82 1 Series
  12. Turner ActiveE (100% Electric)
  13. Turner E46 M3
  14. Turner E46 330i ZHP
  15. Turner E36 M3
  16. Turner E30 M3
  17. Turner MINI Cooper S
  18. McLaren F1
  19. Turner E92 M3 Lime Rock
  20. Turner F80 M3 Silverstone
Video Gallery
Projects
Turner BMW i8 Turner BMW F80 M3 Turner BMW F82 M4 Turner BMW X5 M Turner BMW F22 2 Series Turner BMW F13 M6 Turner BMW F10 M5 Turner BMW F30 335i Turner BMW E9X M3 Turner BMW E92 335i Turner BMW E82 1 Series Turner BMW ActiveE (100% Electric) Turner BMW E46 M3 Turner BMW E46 330i ZHP Turner BMW E36 M3 Turner BMW E30 M3 Turner MINI Cooper S McLaren F1 Turner BMW E92 M3 Lime Rock Turner BMW F80 M3 Silverstone
About Us
About Turner Motorsport Customer Feedback The Turner Team
  1. Open Positions
Returns Policy Shipping Info Contact Us Privacy Policy Security Policy FAQs

Dinan BMW Intake Kits

Dinan BMW Intake Kits Your engine can't make more power without more air. Dinan BMW intake upgrades are engineered to efficiently deliver colder, denser air into the engine. Most Dinan intakes reposition the air filter to a new location where it won't draw heat soaked air from the engine bay. Bigger diameter tubing and filters with more surface area contribute to better flow. More cooler air will make more horsepower. Each intake is specially designed for the particular model using CAD technology and features advanced materials such as carbon fiber and aluminum which also look attractive in the engine bay.

For accurate results, specify your model below.
E9X M3 Dinan Carbon Fiber Intake System

Airflow efficiency and maximizing the potential of the stock intake design were the keys to development for the Dinan S65 intake. Dinan improves on the factory air box system by using a larger K&N filter combined with a precision molded carbon fiber intake tube. The increased amount of air feeds the engine and elicits a slightly more audible and sporty tone over its stock counterpart. Dinan claims 8hp and 5ft-lb torque gain with this kit.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This intake is worth 3 points toward your Dinan badge.

Fitment note: Convertible models require modification to a factory chassis brace. Detailed instructions are included.

*NOT CARB APPROVED 

This item fits the following BMWs:
2008-2013 E90 E92 E93 BMW M3 Sedan, Coupe, Convertible

Part #: D760-0028
Price: $1029.00 (USD) 
Free Shipping Free Shipping
Quantity:   
E9X 325/328/330 06-08 Dinan Ram Air Intake System

Dinan's Ram-Air Intake Assembly takes full advantage of the ram air effect by literally scooping up additional cool air from the area next to the brake duct, supplementing the existing intake ducting for better breathing. The result is increased horsepower and torque, as well as improved throttle response. The system has been designed to work with the factory air box, fitted with the included free flow air filter element. A powder coated aluminum ''air scoop'' feeds greater volumes of cool air through a silicone hose and injection-molded air-box duct for a virtually invisible but highly effective performance upgrade.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This intake is worth 3 points toward your Dinan badge.

This item fits the following BMWs:
2006-2008 E90 BMW 325i 325xi 328i 328xi 330i 330xi - Sedan
2007-2008 E91 BMW 325i 325xi 328i 328xi - Touring Wagon
2007-2008 E92 BMW 328i 328xi - Coupe
2007-2008 E93 BMW 328i - Convertible

Part #: D760-9000
Price: $462.00 (USD) 
Free Shipping Free Shipping
Quantity:   
E46 330i Dinan High Flow Intake System

Dinan has enigneered a new air box cover that allows  you to run a larger air filter but retain a stock-like appearance. The Dinan 330 intake cover seals better to the lower section ensuring no power-robbing hot air enters the intake. A new lower tube draws air from the brake duct, nearly doubling the volume of cool air entering the engine.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This intake is worth 3 points toward your Dinan badge.

This item fits the following BMWs:
2001-2006 E46 BMW 330i 330ci 330xi

Part #: D760-0002
Price: $256.00 (USD) 
Free Shipping Free Shipping
Quantity:   
F02 750iX/LiX Dinan Carbon Fiber Air Intake & Strut Tower Brace

Dinan's Cold Air Intake system for the F01/F02 750iX/LiX adds two additional intake snorkels to complement the factory intake ducts to the airboxes (a total of 4 intake ducts feeding air into the engine). Dinan studied the aerodynamics and packaging of the front end to determine where additional intakes can take in air. New ducts made from carbon fiber run from the top of the radiator support where it gets a ram-air effect from the front grilles, and into the back of the air plenum. Dinan has shown peak gains of 13hp and 10ft-lbs of torque from the intake alone but greater gains come at higher RPM where more airflow is required.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This intake is worth 3 points toward your Dinan badge.

Fitment note: installation of this kit requires permanent modification to the plenum and radiator support. Detailed instructions are included but professional installation is strongly recommended.

This item fits the following BMWs:
2009+ F01 F02 BMW 750iX 750LiX

Part #: D760-0044
Price: $2780.00 (USD) 
Free Shipping Free Shipping
Quantity:   
F02 750i/Li Dinan Carbon Fiber Air Intake & Strut Tower Brace

Dinan's Cold Air Intake system for the F01/F02 750i/Li adds two additional intake snorkels to complement the factory intake ducts to the airboxes (a total of 4 intake ducts feeding air into the engine). Dinan studied the aerodynamics and packaging of the front end to determine where additional intakes can take in air. New ducts made from carbon fiber run from the top of the radiator support where it gets a ram-air effect from the front grilles, and into the back of the air plenum. Dinan has shown peak gains of 13hp and 10ft-lbs of torque from the intake alone but greater gains come at higher RPM where more airflow is required.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This intake is worth 3 points toward your Dinan badge.

Fitment note: installation of this kit requires permanent modification to the plenum and radiator support. Detailed instructions are included but professional installation is strongly recommended.

This item fits the following BMWs:
2009+ F01 F02 BMW 750i 750Li

Part #: D760-0033
Price: $2780.00 (USD) 
Free Shipping Free Shipping
Quantity:   
MZ3 S52 Dinan Cold Air Intake System

The Dinan intake for the S52 engine in the MZ3 relocates the intake filter to an area of low pressure behind the front bumper. The filter is no longer sucking hot air from the engine compartment. Instead it draws in cooler, denser, more oxygen-rich air into the intake.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This intake is worth 3 points toward your Dinan badge.

This item fits the following BMWs:
1998-2000 Z3 BMW Z3 M Coupe M Roadster (S52 engine)

Part #: D760-0323A
Price: $462.00 (USD) 
Free Shipping Free Shipping
Quantity:   
E60 545i Dinan Intake System

Dinan's Cold Air Intake system for the E60 545i adds an additional intake snorkel to complement the factory intake duct. The Dinan intake is designed around a completely new air box assembly that adds a new intake duct to draw air from both kidney grilles. The new airbox and piping are designed with a composite material that blocks hot air. A K&N high flow air filter sits in the new airbox. Professional installation is recommended but detailed instructions are included. Dinan has shown peak gains of 17hp and 14ft-lbs of torque from the intake alone but greater gains come at higher RPM where more airflow is required. Performance software is recommended.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This intake is worth 3 points toward your Dinan badge.

This item fits the following BMWs:
2004-2006 E60 BMW 545i

Part #: D760-0005
Price: $617.00 (USD) 
Quantity:   
F10 M5 Dinan Carbon Fiber Intake System

Dinan's Cold Air Intake system for the F10 M5 adds two additional intake snorkels to complement the factory intake ducts to the airboxes (a total of 4 intake ducts feeding air into the engine). Dinan studied the aerodynamics and packaging of the front end to determine where additional intakes can take in air. New airbox covers incorporate carbon fiber air ducts that run to the top of the radiator support where it gets a ram-air effect from the front grilles. The new airbox cover and piping are designed with a composite material that blocks hot air. A K&N high flow air filter that has 77% more surface area than stock sits in the new airbox. Dinan has shown peak gains of 13hp and 9ft-lbs of torque from the intake alone but greater gains come at higher RPM where more airflow is required.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This intake is worth 3 points toward your Dinan badge.

This item fits the following BMWs:
2012+ F10 BMW M5

Part #: D760-0035
Price: $3089.00 (USD) 
Quantity:   
E60 550i Dinan High Flow Intake System

Dinan's Cold Air Intake system for the E60 550i adds an additional intake snorkel to complement the factory intake duct. The Dinan intake is designed around a completely new air box assembly that adds a new intake duct to draw air from both kidney grilles. The new airbox and piping are designed with a composite material that blocks hot air. A K&N high flow air filter sits in the new airbox. Professional installation is recommended but detailed instructions are included. Dinan has shown peak gains of 18hp and 15ft-lbs of torque from the intake alone but greater gains come at higher RPM where more airflow is required. Performance software is recommended.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This intake is worth 3 points toward your Dinan badge.

This item fits the following BMWs:
2006-2010 E60 BMW 550i

Part #: D760-0012
Price: $1132.00 (USD) 
Quantity:   
F8X M3/M4 Dinan Carbon Fiber Intake System

Airflow efficiency and maximizing the potential of the stock intake design were the keys to development for the Dinan S55 intake. Dinan improves on the factory air box system by delivering more cool, dense air. The increased amount of air feeds into dual larger volume airboxes complete with larger cone filters that elicit a slightly more audible and sporty tone over its stock counterpart.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This intake is worth 3 points toward your Dinan badge.

This item fits the following BMWs:
2015+ F80 BMW M3 - Sedan
2015+ F82 F83 BMW M4 - Coupe, Convertible

Part #: D760-0045
Price: $2059.00 (USD) 
Free Shipping Free Shipping
Quantity:   
E92/E93 335is Dinan Carbon Fiber Intake System

Dinan's Cold Air Intake system for the E92 335is adds an additional intake snorkel to complement the factory intake duct. The Dinan intake adds a new airbox cover and a carbon fiber intake snorkel that draws cooler air from a low pressure zone behind the front bumper. This location is a full 40 degrees cooler than the factory air inlet. A K&N panel filter replaces the stock filter in the stock airbox and a second K&N cone filter is located on the new snorkel. Professional installation is recommended but detailed instructions are included. Dinan has shown peak gains of 5hp and 6ft-lbs of torque from the intake alone but greater gains come at higher RPM where more airflow is required. Performance software is recommended. Beautiful and high quality carbon fiber dresses up the engine bay while also taking advantage of composite's superior thermal resistance.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This intake is worth 3 points toward your Dinan badge.

This item fits the following BMWs:
2010-2013 E92 BMW 335is - Coupe
2010-2013 E93 BMW 335is - Convertible

Part #: D760-0031
Price: $1544.00 (USD) 
Quantity:   
E36 325i 92-95 Dinan Cold Air Intake

The Dinan intake for the E36 relocates the intake filter to an area of low pressure behind the front bumper. The filter is no longer sucking hot air from the engine compartment. Instead it draws in cooler, denser, more oxygen-rich air into the intake.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This intake is worth 3 points toward your Dinan badge.

This item fits the following BMWs:
1992-1995 E36 BMW 325is 325ic 325i

Part #: D760-0320A
Price: $411.00 (USD) 
Quantity:   
F06/F13 Dinan Carbon Fiber Intake System

Dinan's Cold Air Intake system for the F06/F13 M6 adds two additional intake snorkels to complement the factory intake ducts to the airboxes (a total of 4 intake ducts feeding air into the engine). Dinan studied the aerodynamics and packaging of the front end to determine where additional intakes can take in air. New airbox covers incorporate carbon fiber air ducts that run to the top of the radiator support where it gets a ram-air effect from the front grilles. The new airbox cover and piping are designed with a composite material that blocks hot air. A K&N high flow air filter that has 77% more surface area than stock sits in the new airbox. Dinan has shown peak gains of 13hp and 9ft-lbs of torque from the intake alone but greater gains come at higher RPM where more airflow is required.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This intake is worth 3 points toward your Dinan badge.

This item fits the following BMWs:
2012+ F06 BMW M6 Gran Coupe
2012+ F12 F13 BMW M6

Part #: D760-0037
Price: $3089.00 (USD) 
Quantity:   
E82 135i, E9X 335i Dinan Carbon Fiber Intake System

Dinan's Cold Air Intake system for the E9X 335i/xi adds an additional intake snorkel to complement the factory intake duct. The Dinan intake adds a new airbox cover and a carbon fiber intake snorkel that draws cooler air from a low pressure zone behind the front bumper. This location is a full 40 degrees cooler than the factory air inlet. A K&N panel filter replaces the stock filter in the stock airbox and a second K&N cone filter is located on the new snorkel. Professional installation is recommended but detailed instructions are included. Dinan has shown peak gains of 5hp and 6ft-lbs of torque from the intake alone but greater gains come at higher RPM where more airflow is required. Performance software is recommended. Beautiful and high quality carbon fiber dresses up the engine bay while also taking advantage of composite's superior thermal resistance.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This intake is worth 3 points toward your Dinan badge.

This item fits the following BMWs:
2008-2010 E82 E88 BMW 135i
2007-2010 E90 BMW 335i - Sedan
2007-2008 E90 BMW 335xi - Sedan
2007-2010 E92 BMW 335i 335is - Coupe
2007-2010 E93 BMW 335i 335is - Convertible

Part #: D760-0030
Price: $1338.00 (USD) 
Quantity:   
E85 Z4 3.0i Dinan High Flow Intake System

Dinan has enigneered a new air box cover that allows  you to run a larger air filter but retain a stock-like appearance. The Dinan 330 intake cover seals better to the lower section ensuring no power-robbing hot air enters the intake.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This intake is worth 3 points toward your Dinan badge.

This item fits the following BMWs:
2003-2005 E85 E86 BMW Z4 2.5 Z4 3.0

Part #: D760-0011
Price: $205.00 (USD) 
Free Shipping Free Shipping
Quantity:   
E36 323/328/M3 Dinan Cold Air Intake System

The Dinan intake for the E36 relocates the intake filter to an area of low pressure behind the front bumper. The filter is no longer sucking hot air from the engine compartment. Instead it draws in cooler, denser, more oxygen-rich air into the intake.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This intake is worth 3 points toward your Dinan badge.

This item fits the following BMWs:
1992-1999 E36 BMW 323is 323ic 328i 328is 328ic M3

Part #: D760-0321A
Price: $308.00 (USD) 
Free Shipping Free Shipping
Quantity:   
F2X M235i, F3X 335/435, F87 M2 Dinan Carbon Fiber Intake System

Airflow efficiency and maximizing the potential of the stock intake design were the keys to development for the Dinan N55 intake. Dinan improves on the factory air box system by delivering more cool, dense air. The increased amount of air feeds into dual larger volume airbox complete with a larger cone filter that elicit a slightly more audible and sporty tone over its stock counterpart. Dinan claims 10hp and 15ft-lb torque gain with this kit.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This intake is worth 3 points toward your Dinan badge.

Fitment note: Convertible models require modification to a factory chassis brace. Detailed instructions are included.

This item fits the following BMWs:
2014+ F22 F23 BMW M235i M235iX
2012-2015 F30 BMW 335i 335i X-Drive - Sedan
2012-2016 F32 BMW 435i 435i X-Drive - Coupe
2013-2016 F33 BMW 435i 435i X-Drive - Convertible
2012-2015 F34 BMW 335i 335i X-Drive - Gran Turismo
2012-2016 F36 BMW 435i 435i X-Drive - GranCoupe

Part #: D760-0038
Price: $617.00 (USD) 
Free Shipping Free Shipping
Quantity:   
E39 M5 Dinan Cold Air Intake System

The Dinan intake system for the E39 M5 relocates the intake filters to an area of low pressure behind the front bumper. The filters are no longer sucking hot air from the engine compartment. Instead they draw cooler, denser, more oxygen-rich air into the intake. Custom K&N filters and heat shields further isolate the filters. Also included with the intake kit is an optional intake air temp sensor relocation kit that will move the IAT to a new position for a more accurate reading. Professional installation is strongly recommended for the entire kit but detailed installation instructions are included.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This intake is worth 3 points toward your Dinan badge.

This item fits the following BMWs:
1999-2003 E39 BMW M5

Part #: D760-0390C
Price: $1132.00 (USD) 
Quantity:   
F10 550iX 2014+ Dinan Carbon Fiber Air Intake & Strut Tower Brace

Dinan's Cold Air Intake system for the F10 550i X-Drive adds two additional intake snorkels to complement the factory intake ducts to the airboxes (a total of 4 intake ducts feeding air into the engine). Dinan studied the aerodynamics and packaging of the front end to determine where additional intakes can take in air. New ducts made from carbon fiber run from the top of the radiator support where it gets a ram-air effect from the front grilles, and into the back of the air plenum. Dinan has shown peak gains of 13hp and 10ft-lbs of torque from the intake alone but greater gains come at higher RPM where more airflow is required. Reinforcements are included to strengthen the strut towers.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This intake is worth 3 points toward your Dinan badge.

Fitment note: installation of this kit requires permanent modification to the plenum and radiator support. Detailed instructions are included but professional installation is strongly recommended.

This item fits the following BMWs:
2014+ F10 BMW 550xi

Part #: D760-0036
Price: $2780.00 (USD) 
Free Shipping Free Shipping
Quantity:   
F10 550iX 2011-2013 Dinan Carbon Fiber Air Intake & Strut Tower Brace

Dinan's Cold Air Intake system for the F10 550i X-Drive adds two additional intake snorkels to complement the factory intake ducts to the airboxes (a total of 4 intake ducts feeding air into the engine). Dinan studied the aerodynamics and packaging of the front end to determine where additional intakes can take in air. New ducts made from carbon fiber run from the top of the radiator support where it gets a ram-air effect from the front grilles, and into the back of the air plenum. Dinan has shown peak gains of 13hp and 10ft-lbs of torque from the intake alone but greater gains come at higher RPM where more airflow is required. Reinforcements are included to strengthen the strut towers.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This intake is worth 3 points toward your Dinan badge.

Fitment note: installation of this kit requires permanent modification to the plenum and radiator support. Detailed instructions are included but professional installation is strongly recommended.

This item fits the following BMWs:
2011-2013 F10 BMW 550xi

Part #: D760-0032
Price: $2780.00 (USD) 
Free Shipping Free Shipping
Quantity:   

E90 335xi 2009-2010 Dinan Carbon Fiber Intake System

Fits 2009-2010 335i X-Drive models only.
E90 335xi 2009-2010 Dinan Carbon Fiber Intake System

Dinan's Cold Air Intake system for the E9X 335i/xi adds an additional intake snorkel to complement the factory intake duct. The Dinan intake adds a new airbox cover and a carbon fiber intake snorkel that draws cooler air from a low pressure zone behind the front bumper. This location is a full 40 degrees cooler than the factory air inlet. A K&N panel filter replaces the stock filter in the stock airbox and a second K&N cone filter is located on the new snorkel. Professional installation is recommended but detailed instructions are included. Dinan has shown peak gains of 5hp and 6ft-lbs of torque from the intake alone but greater gains come at higher RPM where more airflow is required. Performance software is recommended. Beautiful and high quality carbon fiber dresses up the engine bay while also taking advantage of composite's superior thermal resistance.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This intake is worth 3 points toward your Dinan badge.

This item fits the following BMWs:
2009-2010 E90 BMW 335xi - Sedan

Part #: D760-0029
Price: $1338.00 (USD) 
Quantity:   

E39 540i 99-03 Dinan Cold Air Intake System

For vehicles with a production date from 10/1998
E39 540i 99-03 Dinan Cold Air Intake System

The Dinan intake for the 1999-2003 E39 540i relocates the intake filter to an area of low pressure behind the front bumper. The filter is no longer sucking hot air from the engine compartment. Instead it draws in cooler, denser, more oxygen-rich air into the intake.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This intake is worth 3 points toward your Dinan badge.

This item fits the following BMWs:
1999-2003 E39 BMW 540i

Part #: D760-0620
Price: $411.00 (USD) 
Free Shipping Free Shipping
Quantity:   
Get notified about money saving
specials & deals for your BMW
enter your email address
  • 22 years of BMW Tuning.
  • Award winning service.
  • 10,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook




    • 1-800-280-6966
      Mon-Thur 9am-6pm ET, Fri 9am-5pm ET

      • © TurnerMotorsport.com 1993-2017. All Rights Reserved.