Find Parts That Fit Your Vehicle

BMW Camshafts

Many times you can boost your mid-high end power with factory BMW parts such as these stock BMW camshafts. In some cases you can bolt these alternate cams into your engine for an instant power boost. BMW itself offered performance cams in some models. We offer upgrades using S50 / S52 cams, ZHP cams, and others that meet factory OE specs.

Schrick Camshaft Set - E36 M3, MZ3, M52 inc 2.8 1995-99 - 256/264
Schrick - Corporate Logo
T#:3859
Part#: TMS3859
In Stock
$1,169.90
Free Shipping

For the US E36 M3. Schrick 264/256 degree camshafts boost mid-high end power for that extra motivation at higher rpm. Low-end torque is not seriously affected due to the M50/M52s VAN0S System. And, higher profile cams work extremely well with an upgraded intake and exhaust. When upgrading the cams there are other areas you must take into consideration. Higher-flow fuel injectors, larger mass-air sensor, and custom programming are strongly recommended. Turner Motorsport sells complete intake & cam packages that boost power to over 290hp. See the Engine section under Camshafts for more info.

Cam Specs:
Intake - 264 degree, 11.2mm lift
Exhaust - 256 degree, 10.6mm lift

Schrick Technical Information / Specs

This item fits the following BMWs:
1993-1998 E36 BMW 325i 325is 325ic 328i 328is 328ic M3
1993-1995 E34 BMW 525i
1997-1998 Z3 BMW Z3 2.8
1998-1999 Z3 BMW M Roadster M Coupe

Schrick Camshaft Set - E36 M3-spec - 252/244 Degree
Schrick - Corporate Logo
T#:21521
Part#: TMS21521
In Stock
$1,119.90
Free Shipping
These Schrick camshafts are the same specs as the stock US S50 cams -
Intake: 252 degree, 10.2mm lift
Exhaust: 244 degree, 9.5mm lift

With original S50/S52 cams in short supply, and a new set running over $2,000 from BMW, you can source new M3-spec cams from Schrick. These are the same specs as the US S50 engine and very close to the stock S52 cams. These make a great upgrade for M50 (325i, 525i) and M52 engines (328i, 528i) with the proper tuning. These bolt in just like the stock and M3 cams with no special hardware upgrades required - use your stock valve springs, lifters, etc. But for reliability we recommend replacing the lifters, valve springs, and retainers with new stock parts on high mileage engines.

Full cam specs: Schrick Technical Information / Specs

This item fits the following BMWs:
1993-1999 E36 BMW 325i 325is 325ic 328i 328is 328ic M3
1993-1995 E34 BMW 525i
1997-1998 E39 BMW 528i
1997-1998 Z3 BMW Z3 2.8
1998-1999 Z3 BMW M Roadster M Coupe
Rocker Arm - M10 4 cylinder, M30 6 cylinder engine
Febi - Corporate Logo
T#:6780
Part#: 11331271833
Expected Availability: 1 Day
$15.48
Free Shipping on orders $99 and up
Replace your worn rocker arm with this unit. The rocker arms make contact with the camshaft and control the movement of the valves. Any time a camshaft is replace it is always a good idea to replace the rocker arms with new units. It is also a good idea to replace the rocker shafts that the arms mount on.
Since the late 1800aEURtms Febi has been fabricating replacement metal parts. This history is self evident in the quality and vast amount of applications they service. With more than 34,000 repair solutions for cars and commercial vehicles you can be sure Febi has you covered.

This item fits the following BMWs:
1970-1976 2002 BMW 1600 2002 2002tii
1984-1985 E30 BMW 318i
1976-1981 E12 BMW 528i 530i
1982-1988 E28 BMW 533i 535i 535is
1989-1993 E34 BMW 535i
1982-1989 E24 BMW 633csi 635csi
1981-1987 E23 BMW 733i 735i
1988-1992 E32 BMW 735i 735il

OEM INA Camshaft Timing Chain Tensioner -- E39 E38 E53 E52 m62
Ina - Corporate Logo
T#:378655
Part#: 11311435026
In Stock
$63.95
Free Shipping on orders $99 and up

This is an OEM INA Timing Chain Tensioner. Keeping pressure on the timing chain, this keeps the chain from slipping teeth and causing the timing to be off, potentially leading to engine damage.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


270 Camshaft - M30
Ireland Engineering - Corporate Logo
T#:558000
Part#: M30270CAM
In Stock
$250.00
$250.00

Looking to take your car's performance to the next step beyond simple bolt-ons? Add big power with a performance camshaft. This performance camshaft from Ireland Engineering is ground from a fresh billet for long life and peak performance.

Fits the Following BMWs:

M30 engine

256 Stock Replacement Camshaft - M20
Ireland Engineering - Corporate Logo
T#:557996
Part#: M20CAM
Direct Ship
$155.00
$155.00

A worn camshaft dramatically reduces performance. Replace your worn camshaft with this part from Ireland Engineering, ground from a fresh billet for long life and peak performance.

Fits the Following BMWs:

M20 engine


304 Camshaft - 2002
Ireland Engineering - Corporate Logo
T#:557993
Part#: 02CAM304B
Direct Ship
$340.00
$340.00

Looking to take your car's performance to the next step beyond simple bolt-ons? Add big power with a performance camshaft. This performance camshaft from Ireland Engineering is ground from a fresh billet for long life and peak performance. As with any high-lift camshaft, dual valve springs and oversize rocker arm eccentrics are required. Carefully check piston-to-valve clearance during assembly. Additional valve pockets may be required.

Fits the Following BMWs:

2002

304 Camshaft - M20
Ireland Engineering - Corporate Logo
T#:557997
Part#: M20CAM304
Direct Ship
$375.00
$375.00

Looking to take your car's performance to the next step beyond simple bolt-ons? Add big power with a performance camshaft. This performance camshaft from Ireland Engineering is ground from a fresh billet for long life and peak performance. As with any high-lift camshaft, dual valve springs and oversize rocker arm eccentrics are required. Carefully check piston-to-valve clearance during assembly. Additional valve pockets may be required.

Fits the Following BMWs:

M20 engine


284/280 Camshaft - M20
Ireland Engineering - Corporate Logo
T#:557999
Part#: IEM20CAM284280
Direct Ship
$390.00
$390.00

Looking to take your car's performance to the next step beyond simple bolt-ons? Add big power with a performance camshaft. This performance camshaft from Ireland Engineering is ground from a fresh billet for long life and peak performance.

Fits the Following BMWs:

M20 engine


314 Camshaft - 2002
Ireland Engineering - Corporate Logo
T#:557994
Part#: 02CAM314B
Direct Ship
$340.00
$340.00

Looking to take your car's performance to the next step beyond simple bolt-ons? Add big power with a performance camshaft. This performance camshaft from Ireland Engineering is ground from a fresh billet for long life and peak performance. As with any high-lift camshaft, dual valve springs and oversize rocker arm eccentrics are required. Carefully check piston-to-valve clearance during assembly. Additional valve pockets may be required.

Fits the Following BMWs:

2002

284/280 Camshaft - M30 Late Style
Ireland Engineering - Corporate Logo
T#:558507
Part#: M30BILLETN21
Direct Ship
$390.00
$390.00

Looking to take your car's performance to the next step beyond simple bolt-ons? Add big power with a performance camshaft. This performance camshaft from Ireland Engineering is ground from a fresh billet for long life and peak performance.

Fits the Following BMWs:

M30 engine

272 Camshaft - M20
Ireland Engineering - Corporate Logo
T#:557998
Part#: M20CAM272IE
Direct Ship
$325.00
$325.00

Looking to take your car's performance to the next step beyond simple bolt-ons? Add big power with a performance camshaft. This performance camshaft from Ireland Engineering is ground from a fresh billet for long life and peak performance.

Fits the Following BMWs:

M20 engine



302 Camshaft - 2002
Ireland Engineering - Corporate Logo
T#:557992
Part#: 02CAM302B
Direct Ship
$340.00
$340.00

Looking to take your car's performance to the next step beyond simple bolt-ons? Add big power with a performance camshaft. This performance camshaft from Ireland Engineering is ground from a fresh billet for long life and peak performance. As with any high-lift camshaft, dual valve springs and oversize rocker arm eccentrics are required. Carefully check piston-to-valve clearance during assembly. Additional valve pockets may be required.

Fits the Following BMWs:

2002

292 Camshaft - 2002
Ireland Engineering - Corporate Logo
T#:557991
Part#: 02CAM292B
Direct Ship
$295.00
$295.00

Looking to take your car's performance to the next step beyond simple bolt-ons? Add big power with a performance camshaft. This performance camshaft from Ireland Engineering is ground from a fresh billet for long life and peak performance. As with any high-lift camshaft, dual valve springs and oversize rocker arm eccentrics are required. Carefully check piston-to-valve clearance during assembly. Additional valve pockets may be required.

Fits the Following BMWs:

2002

264 Stock Replacement Camshaft - 2002
Ireland Engineering - Corporate Logo
T#:557995
Part#: 02CAM
Direct Ship
$175.00
$175.00

A worn camshaft dramatically reduces performance. Replace your worn camshaft with this part from Ireland Engineering, ground from a fresh billet for long life and peak performance.

Fits the Following BMWs:

2002


1995 M3 Schrick Camshaft/Injectors/Chip Upgrade Kit
Turner Motorsport - Corporate Logo
T#:392584
Part#: TMS3435PDK
Ships in 2 Days
Sale - Save 7% $1,718.85
Starting at $1,598.01
Free Shipping
Sale - Save 7% $1,718.85
Starting at $1,598.01
Free Shipping

Schrick camshafts boost mid-high end power for that extra motivation at higher rpm. Low-end torque is not seriously affected due to the M3's VAN0S valve timing.

And, higher profile cams work extremely well with an upgraded intake and exhaust.


Genuine BMW Camshaft - N55 S55 3.0L
Genuine BMW - Corporate Logo
T#:34783
Part#: 11377589883
Ships in 2 Days
14% off MSRP $762.14
$651.91
Free Shipping on orders $99 and up
14% off MSRP $762.14
$651.91
Free Shipping on orders $99 and up

If your BMW's N55 or S55 has worn camshaft lobes or if you are rebuilding your head, this replacement camshaft from BMW is perfect to restore the original quality and performance.


Genuine BMW Eccentric Shaft -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N55,S55