click to Chat Live
Contact YouTube Blog Twitter facebook Turner Motorsport on Instagram
1-800-280-6966
 |   Login
  • 0
 |   Login
Shopping Cart (0) Wishlist
Contact

(0) item(s) in your Shopping Cart
Home
Categories
Specials Gifts & Clothing
  1. Genuine BMW Accessories
  2. Genuine BMW Clothing
  3. Turner Shirts Hats and Gear
  4. Gifts under $25
  5. Gifts under $50
  6. Gifts under $100
  7. Gifts over $100
  8. Gift Certificates
  9. Stocking Stuffers
  10. Gift Packages
Brakes
  1. Brake Overhaul Packages
  2. Brake Pads
  3. Brake Pad Sensors
  4. Brake Rotors
  5. StopTech Big Brake Kits
  6. Brembo Big Brake Kits
  7. Stainless Steel Brake Lines
  8. Brake Fluid
  9. Brake Calipers
  10. Caliper Rebuild Kits
  11. Parking Brake Parts
  12. Brake Master Cylinders
  13. ABS/DSC System Parts
  14. Brake Cooling Ducts & Backing Plates
  15. Brake Pads - Brembo GT BBK Calipers
  16. Brake Pads - StopTech BBK Calipers
  17. CATuned Big Brake Kits
  18. Hydraulic Hand Brakes
Car Care & Accessories
  1. Car Covers
  2. Wheel & Tire Cleaning
  3. Wax, Polish and Cleaning Supplies
  4. Detailing Gear
  5. Leather & Plastic Care
  6. Car Cleaning Supplies
  7. Chassis Paint, Coatings, Sealants, and Rust Conversion
Drivetrain
  1. Differential and Gearing Upgrades
  2. Differential Mounts and Upgrades
  3. OEM Clutch Kits & Clutch Parts
  4. Performance Clutch Kits & Parts
  5. Lightweight Aluminum Flywheel Upgrades
  6. Stock OEM Dual Mass Flywheels
  7. Stainless Steel Clutch Lines
  8. Clutch Parts
  9. UUC Short Shift Kits
  10. Axle Shafts
  11. Driveshafts
  12. B&M Short Shifters
  13. Performance Short Shift Kits
  14. UUC DSSR - Double Sheer Selector Rod
  15. Drivershaft Center Support Bearings
  16. Flex Discs & Guibos
  17. Shifter Bushings
  18. Transmission Mounts
  19. Transmission Parts
Engine Chips
  1. Performance Chips, 1986-1995 Models
  2. Shark Injector Performance Software, 1996-2005 Models
  3. Performance Flash Software, 2005+ Models
  4. Sprint Booster Drive-by-Wire Module
  5. Stand-Alone Engine Management
  6. Burger Motorsports Tuning
Engine Parts
  1. Engine Performance Packages
  2. Cam Sprockets & Gears
  3. Water Pumps
  4. Thermostats
  5. Radiators & Cooling System Overhaul Kits
  6. Oil Pan Baffles
  7. Radiator Hoses, Cooling Hoses, & Hose Sets
  8. Engine Fans & Fan Clutches
  9. Underdrive Power Pulleys
  10. Camshafts
  11. Schrick Performance Camshafts
  12. E30 M3 S14 Engine Parts
  13. External Engine Parts
  14. Drive Belts & V-Belts
  15. Gaskets, Gasket Sets, Seals, & O-Rings
  16. Factory-Spec Replacement Turbos and Kits
  17. Crankcase Vent, PCV, and Oil Separator Systems
  18. Turbo Upgrades and Kits
  19. Motor Mounts
  20. Electrical Sensors, Switches, & Relays
  21. Ignition Parts
  22. Alternator & Alternator Parts
  23. Starter Motors & Starter Parts
  24. Fuel System Parts
  25. Internal Engine Parts
  26. Cylinder Head Parts & Head Bolts
  27. VANOS Units & Parts
  28. Rod Bearing Kits
  29. Oil Coolers & Oil Cooler Parts
Exhaust
  1. Supersprint Performance Exhaust Systems
  2. Performance Headers & Downpipes
  3. Turner Motorsport Performance Exhaust
  4. Akrapovic Performance Exhaust Systems
  5. Borla Performance Exhaust Systems
  6. Corsa Performance Exhaust Systems
  7. Dinan Free Flow Exhaust Systems
  8. Performance Exhaust Systems
  9. OEM Replacement Mufflers and Exhaust Systems
  10. Exhaust System Upgrades
  11. Exhaust Muffler Tips
  12. Catalytic Converters
  13. Oxygen Sensor - O2 Sensors
  14. Exhaust Gaskets Hangers and Parts
  15. Remus Performance Exhaust Systems
Exterior / Body
  1. Black Grills
  2. Chrome Grills & Trim
  3. Emblems & Decals for Hood, Trunk, and Wheels
  4. Painted Reflectors
  5. Front Spoilers, Bumper Covers, & Air Dams
  6. Rear Spoilers, Rear Wings, & Aprons
  7. Body Trim Parts & Accessories
  8. Carbon Fiber Trunk Lids
  9. Hood & Trunk Shocks, Struts
  10. License Plate Brackets & License Plate Frames
  11. Mirror Kits & Mirror Parts
  12. Window Regulators & Motors
  13. Wiper Blades, Wiper Pumps, & Wiper Motor Parts
  14. Hood Pins and AeroCatch Latches
  15. Racing Tow Hooks and Tow Straps
  16. Aero & Body Kits
Intake
  1. aFe Cold-Air Intake Kits
  2. Turbos & Active Autowerke Superchargers
  3. Dinan Cold Air Intake Kits
  4. Gruppe M Cold-Air Intake Kits
  5. Performance Intake Kits
  6. aFe Performance Air Filters
  7. K&N Performance Air Filters
  8. Replacement Cone Air Filters (for Cold Air Intakes)
  9. Intake Cleaning & Recharging Kits
  10. Intake Manifold Upgrades
  11. Intake Manifold Components (DISA, Vacuum, CCV, Etc)
  12. BOV, Chargepipe, and Intercooler Upgrade Kits
  13. Mass Air Sensor & Air Flow Meters
  14. Intake Boots & Hoses
  15. Throttle Body Parts
  16. Other Intake Kits
Interior
  1. Floor Mats
  2. Gauge Kits and Data Acquisition
  3. Auxiliary Input Adaptors for BMW
  4. Pedal Sets
  5. Escort Radar Detectors
  6. Factory Steering Wheels
  7. Racing Steering Wheels
  8. Shift Knobs, Shift Boots, & Shift Handles
  9. Seats & Seat Accessories
  10. Seat Belts and Racing Harnesses
  11. Cup Holders and Storage
  12. Carbon Fiber Interior Parts
  13. Door Sill Strips
  14. Heating & Air Conditioning
  15. Interior Switches and Switchgear
  16. Sunshades & Windscreens
  17. Interior Trim & Accessories
  18. Fire Extinguishers and Mounts
  19. Helmets
Lighting
  1. Euro Clear Turn Signals, Parking Lights, & Tail Lights
  2. Turn Signals / Parking Lights
  3. Angel Eye Headlight Conversions
  4. Bulbs for Headlights, Turn Signals and Tail Lights
  5. Headlights, Headlight Lenses, & Headlight Parts
  6. Fog Lights, Fog Light Lenses, & Fog Light Parts
  7. Tail Lights
  8. Stealth Bulbs
  9. Universal
Maintenance
  1. Routine Maintenance & Tune-Up Packages
  2. Oil Filters & Oil Filter Kits
  3. Air Filters
  4. Fuel Filters
  5. Cabin Air Filters, Heppa Filters, & Microfilters
  6. Transmission Filter Kits & Transmission Service Parts
  7. Distributor Caps & Rotors
  8. Ignition Coils
  9. Ignition Wires / Spark Plug Wires
  10. Spark Plugs
  11. Bentley Repair / Service Manuals
  12. Service Reset Tools & Fault Code Readers
  13. Anti-Freeze and Coolant
  14. Engine Oils - Genuine BMW and OEM
  15. Power Steering and Hydraulic Fluids
  16. Transmission and Gear Oil - Genuine BMW and OEM
  17. MOTUL Engine Oil and Gear Lubricants
  18. Red Line Oil & Fluids
  19. Liqui-Moly Oil and Additives
Suspension
  1. Shocks & Struts
  2. H&R Performance Springs
  3. Dinan Performance Springs
  4. H&R Cup Kit Shock & Spring Packages
  5. Spring & Shock Packages
  6. Fortune Auto Coilover Kits
  7. Dinan Coilover Spring Kits
  8. Turner / H&R Height Adjustable Spring Sets
  9. Bilstein PSS PSS9 PSS10 Coil Over Suspensions
  10. H&R Coil Over Suspensions
  11. KW Coil Over Suspensions
  12. Moton Coil Overs & Race Shocks
  13. ST Suspension Coilover Kits
  14. Turner Motorsport TrackSport Coil-Over Suspension Kits
  15. Turner Motorsport Racing Suspension Kits
  16. TC Kline Racing Coil Overs
  17. Chassis Reinforcement Kits & Parts
  18. Sway Bar Kits
  19. Sway Bar Links & Sway Bar Parts
  20. Camber / Caster Kits
  21. Strut Braces & Stress Bars
  22. Control Arm Replacements & Upgrades
  23. Suspension Bushings & Mounts
  24. Wheel Bearings & Hub Assemblies
  25. Steering Racks & Power Steering Pumps
  26. Tie Rods & Steering Parts
  27. Coil Over Spring Hardware
  28. CATuned Coilover Kits
  29. AC Schnitzer Suspension Kits
  30. Sachs Performance Coil Over Suspension
  31. AST Suspension
  32. Ohlins Coilover Kits
Wheels
  1. Apex Flow Formed Alloy Wheels
  2. Forgeline Custom Forged Alloy Wheels
  3. HRE FlowForm Performance Alloy Wheels
  4. Vorsteiner Wheels
  5. Rohana Wheels
  6. D Force Flow Formed Alloy Wheels
  7. Dinan Performance Wheels
  8. Alpina Alloy Wheels
  9. Original BMW Wheels and Wheel Upgrades
  10. Turner Motorsport Wheel Spacers
  11. ECS Tuning Wheel Spacers
  12. H&R Wheel Spacers
  13. Wheel Bolts, Wheel Studs and Nuts
  14. Wheel Emblems, Caps, and Accessories
  15. High Performance Wheels
  16. BBS Wheels
Tools
  1. Alignment Tools
  2. Battery Chargers and Tenders
  3. Brake Tools
  4. Clutch Alignment Tools
  5. Coil Over Wrenches
  6. Cooling System Tools
  7. Cylinder Head and VANOS Tools
  8. Exhaust Tools
  9. Fan and Fan Clutch Tools
  10. Fault Code Readers and OBD Scan Tools
  11. Fuel System Tools
  12. Genuine BMW Tool Kits
  13. Oil Service Tools
  14. Schwaben Lighting
  15. Sockets
  16. Spark Plug Sockets
  17. Transmission and Differential Tools
  18. Wheel Pin Tools
  19. Workshop Chemicals
  20. Race Ramps
  21. Fender Rollers
  22. Vehicle Lifts
Clearance
Choose BMW
BMW 1 Series
  1. (E82) 1-series Coupe 2008+
  2. (E88) 1-series Convertible 2008+
BMW 2 Series
  1. (F22) 2-Series Coupe 2014+
  2. (F23) 2-Series Convertible 2014+
  3. (F87) M2 2016+
BMW 3 Series
  1. (E21) 3-Series 1977-1983
  2. (E30) 3-series 1984-1991
  3. (E30) M3 1988-1991
  4. (E36) 3-series 1992-1999
  5. (E36) M3 1995-1999
  6. (E46) 3-Series 1999-2005
  7. (E46) M3 2001-2006
  8. (E90) 3-Series Sedan 2006-2011
  9. (E90) M3 Sedan 2008-2013
  10. (E91) 3-Series Touring 2006-2013
  11. (E92) 3-Series Coupe 2007-2013
  12. (E92) M3 Coupe 2008-2013
  13. (E93) 3-Series Convertible 2007-2013
  14. (E93) M3 Convertible 2008-2013
  15. (F30) 3-Series Sedan 2012+
  16. (F31) 3-Series Touring 2014+
  17. (F80) M3 2015+
BMW 4 Series
  1. (F32) 4-Series Coupe 2014+
  2. (F33) 4-Series Convertible 2015+
  3. (F34) 3-Series Gran Turismo 2014+
  4. (F82) M4 Coupe 2015+
  5. (F83) M4 Convertible 2015+
  6. (F36) 4-Series Gran Coupe 2015+
BMW 5 Series
  1. (E34) M5 1991-1993
  2. (E39) M5 2000-2003
  3. (E60) M5 2006-2010
  4. (E28) 5-Series 1982-1988
  5. (E34) 5-Series 1989-1995
  6. (E39) 5-Series 1996-2003
  7. (E60) 5-Series Sedan 2004-2010
  8. (E61) 5-Series Touring 2006-2010
  9. (F10) 5-Series 2011+
  10. (G30) 5-Series 2017+
BMW 6 Series
  1. (E24) 6-Series 1977-1989
  2. (E63) 6-Series Coupe 2004-2010
  3. (E64) 6-Series Convertible 2004-2010
  4. (F06) 6-Series Gran Coupe 2013+
  5. (F12) 6-Series Convertible 2012+
  6. (F13) 6-Series Coupe 2012+
BMW 7 Series
  1. (E32) 7-Series 1988-1994
  2. (E38) 7-Series 1995-2001
  3. (E65) 7-Series SWB 2002-2007
  4. (E66) 7-Series LWB 2002-2007
  5. (F01) 7-Series SWB 2009+
  6. (F02) 7-Series LWB 2009+
BMW 8 Series BMW Classics (E9, Bavaria, Isetta, etc)
  1. 2500
  2. 2800
  3. 3.0Si
  4. Bavaria
  5. 2800CS
  6. 3.0CS
  7. 2002
  8. 2002tii
  9. (E12) 528i 1977-1981
  10. (E12) 530i 1975-1978
BMW X Series (SAV)
  1. (E84) X1 Series 2013+
  2. (E83) X3 2004-2010
  3. (F25) X3 2011+
  4. (F26) X4 2015+
  5. (E53) X5 2000-2006
  6. (E70) X5 2007-2013
  7. (F15) X5 2014+
  8. (F85) X5 M 2015+
  9. (E71) X6 2008+
  10. (F16) X6 2015+
  11. (F86) X6 M 2015+
  12. (F48) X1 2016+
  13. (F48) X1 (2016+)
BMW Z Series
  1. (E36/7) Z3 1997-2002
  2. (E85) Z4 M Roadster
  3. (E85/E86/E89) Z4 2003+
  4. (E86) Z4 M Coupe
  5. (E52) Z8 2000-2003
BMW 1600-2002 / tii BMW i Series
  1. (I01) BMW i3 2014+
  2. (I12) BMW i8 2014+
MINI Cooper and Cooper S
Racing
Racing Home Racing News Racing Schedule Racing Photo Gallery
Gallery
Photo Gallery Wallpaper Project Cars
  1. Project i8
  2. Project F80 M3
  3. Turner F82 M4
  4. Turner X5 M
  5. Turner F22 2 Series
  6. Turner F13 M6
  7. Turner F10 M5
  8. Turner F30 335i
  9. Turner E9X M3
  10. Turner E92 335i
  11. Turner E82 1 Series
  12. Turner ActiveE (100% Electric)
  13. Turner E46 M3
  14. Turner E46 330i ZHP
  15. Turner E36 M3
  16. Turner E30 M3
  17. Turner MINI Cooper S
  18. McLaren F1
  19. Turner E92 M3 Lime Rock
  20. Turner F80 M3 Silverstone
Video Gallery
Projects
Turner BMW i8 Turner BMW F80 M3 Turner BMW F82 M4 Turner BMW X5 M Turner BMW F22 2 Series Turner BMW F13 M6 Turner BMW F10 M5 Turner BMW F30 335i Turner BMW E9X M3 Turner BMW E92 335i Turner BMW E82 1 Series Turner BMW ActiveE (100% Electric) Turner BMW E46 M3 Turner BMW E46 330i ZHP Turner BMW E36 M3 Turner BMW E30 M3 Turner MINI Cooper S McLaren F1 Turner BMW E92 M3 Lime Rock Turner BMW F80 M3 Silverstone
About Us
About Turner Motorsport Customer Feedback The Turner Team
  1. Open Positions
Returns Policy Shipping Info Contact Us Privacy Policy Security Policy FAQs

BBS Wheels

Arguably the most trusted and well-regarded wheel manufacturers, BBS Wheels from Germany have been quintessential BMW wheels since their early days in motorsport. All BBS wheels for BMWs are found on this page to set any enthusiast-owned BMW apart from the average daily commuter.
For accurate results, specify your model below.
19

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

CX wheels consist of a pressure cast wheel surface and a flow formed rim structure.  Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in Gloss Anthracite with a diamond cut face and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Specs:

  • 19x8.5 ET32 - qty 4
  • Gloss Anthracite with a diamond cut face
  • Center Bore: PFS
  • Bolt Pattern: 5x120
BBS
Part #: cx001apkKT
Price: $1960.00 (USD) 
Ships on Mar 7, 2018
Quantity:   
19

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

SX wheels consist of a pressure cast wheel surface and a flow formed rim structure.  Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in Sport Silver and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Specs:

  • 19x8.5 ET32 - qty 4
  • Sport Silver
  • Center Bore: PFS
  • Bolt Pattern: 5x120
BBS
Part #: sx0503skKT
Price: $1460.00 (USD) 
Ships on Mar 7, 2018
Quantity:   
19

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

LM-R wheels consist of a pressure cast wheel surface and a flow formed rim structure.  Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in Diamond Silver with a diamond cut lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Specs:

  • 19x8.5 ET32 - qty 4
  • Diamond Silver with a diamond cut lip
  • Center Bore: PFS
  • Bolt Pattern: 5x120
BBS
Part #: lm306dspkKT
Price: $4520.00 (USD) 
Ships on Mar 7, 2018
Quantity:   
19

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

SX wheels consist of a pressure cast wheel surface and a flow formed rim structure.  Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in Crystal Black and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Specs:

  • 19x8.5 ET32 - qty 4
  • Crystal Black
  • Center Bore: PFS
  • Bolt Pattern: 5x120
BBS
Part #: sx0503cbKT
Price: $1460.00 (USD) 
Ships on Mar 7, 2018
Quantity:   
18

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

SX Wheels are pressure cast using BBS own technology to produce an extremely strong and lightweight alloy. 

 Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.

These wheels come in Crystal Black Metallic and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Specs:

  • 18x8 ET30 - qty 4
  • Crystal Black Metallic
  • Center Bore: PFS
  • Bolt Pattern: 5x120
BBS
Part #: sx0102cbKT
Price: $1020.00 (USD) 
Ships on Mar 7, 2018
Quantity:   
19

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

CI-R wheels consist of a pressure cast wheel surface and a flow formed rim structure.  Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in a Platinum Silver with a polished rim protector and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Specs:

  • 19x8.5 ET35 - qty 2
  • 19x9 ET20 - qty 2
  • Platinum Silver with a polished rim protector
  • Center Bore: PFS
  • Bolt Pattern: 5x120
BBS
Part #: cipspo19sKT
Price: $2390.00 (USD) 
Ships on Mar 7, 2018
Quantity:   
19

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

LM wheels consist of a pressure cast wheel surface and a flow formed rim structure.  Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in Diamond Black with a diamond cut lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Specs:

  • 19x8.5 ET32 - qty 2
  • 19x9.5 ET32 - qty 2
  • Diamond Black center with a diamond cut lip
  • Center Bore: PFS
  • Bolt Pattern: 5x120
BBS
Part #: lmdbpk19sKT
Price: $4580.00 (USD) 
Ships on Mar 7, 2018
Quantity:   
19

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

CI-R wheels consist of a pressure cast wheel surface and a flow formed rim structure.  Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in a Platinum Silver with a polished rim protector and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Specs:

  • 19x8.5 ET35 - qty 2
  • 19x9 ET20 - qty 2
  • Platinum Silver with a polished rim protector
  • Center Bore: PFS
  • Bolt Pattern: 5x120
BBS
Part #: cibpo19sKT
Price: $2390.00 (USD) 
Ships on Mar 7, 2018
Quantity:   
18

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

RE-V style wheels combine a lightweight forged construction with an eye-catching yet tasteful design to bring you some of the finest two-piece wheels on the market. 

Forged wheels are created by crushing a solid block of aluminum into the desired shape using an extreme amount of pressure. This creates a wheel that is incredibly strong while remaining relatively lightweight. Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in a black painted finish with a diamond cut lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Specs:

  • 18x8 ET33 - qty 2
  • 18x9 ET37 - qty 2
  • Diamond Black
  • Center Bore: PFS
  • Bolt Pattern: 5x120
BBS
Part #: revdbk18sKT
Price: $2740.00 (USD) 
Ships on Mar 7, 2018
Quantity:   
19

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

CH-R wheels consist of a pressure cast wheel surface and a flow formed rim structure.  Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

 Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in a Black painted finish with a polished lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Specs:

  • 19x8.5 ET32 - qty 4
  • Black
  • Center Bore: PFS
  • Bolt Pattern: 5x120
BBS
Part #: ch104bpoKT
Price: $2380.00 (USD) 
Ships on Mar 7, 2018
Quantity:   
19

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

LM wheels consist of a pressure cast wheel surface and a flow formed rim structure.  Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in Diamond Silver with a diamond cut lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Specs:

  • 19x8.5 ET32 - qty 2
  • 19x9.5 ET32 - qty 2
  • Diamond Silver with a diamond cut lip
  • Center Bore: PFS
  • Bolt Pattern: 5x120
BBS
Part #: lmdspk19sKT
Price: $4570.00 (USD) 
Ships on Mar 7, 2018
Quantity:   
18

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

CH-R wheels consist of a pressure cast wheel surface and a flow formed rim structure.  Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

 Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in a Brilliant Silver painted finish with a polished lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Specs:

  • 18x8 ET40 - qty 2
  • 18x9 ET44 - qty2
  • Brilliant Silver
  • Center Bore: PFS
  • Bolt Pattern: 5x120
BBS
Part #: chspo18sKT
Price: $2080.00 (USD) 
Ships on Mar 7, 2018
Quantity:   
19

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

LM-R wheels consist of a pressure cast wheel surface and a flow formed rim structure.  Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in Diamond Black with a diamond cut lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Specs:

  • 19x8.5 ET32 - qty 4
  • Diamond Black with a diamond cut lip
  • Center Bore: PFS
  • Bolt Pattern: 5x120
BBS
Part #: lm306dbpkKT
Price: $4520.00 (USD) 
Ships on Mar 7, 2018
Quantity:   
19

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

RS style wheels combine a lightweight forged construction with an eye-catching yet tasteful design to bring you some of the finest two-piece wheels on the market. 

Forged wheels are created by crushing a solid block of aluminum into the desired shape using an extreme amount of pressure. This creates a wheel that is incredibly strong while remaining relatively lightweight. Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in a black painted finish with a diamond cut lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Specs:

  • 19x8.5 RS Wheels - qty 4
  • Diamond Black
  • Offset: 32mm 
  • Center Bore: PFS
  • Bolt Pattern: 5x120
BBS
Part #: rg759hdbkKT
Price: $3700.00 (USD) 
Ships on Mar 7, 2018
Quantity:   
20

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

LM wheels consist of a pressure cast wheel surface and a flow formed rim structure.  Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in Diamond Silver with a diamond cut lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Specs:

  • 20x9 ET20 - qty 4
  • Diamond Silver with a diamond cut lip
  • Center Bore: PFS
  • Bolt Pattern: 5x120
BBS
Part #: lm283dspkKT
Price: $5420.00 (USD) 
Ships on Mar 7, 2018
Quantity:   
19

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

CH-R wheels consist of a pressure cast wheel surface and a flow formed rim structure.  Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

 Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in a Titanium painted finish with a polished lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Specs:

  • 19x8.5 ET32 - qty 4
  • Titanium 
  • Center Bore: PFS
  • Bolt Pattern: 5x120
BBS
Part #: ch104tipoKT
Price: $2380.00 (USD) 
Ships on Mar 7, 2018
Quantity:   
18

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

CH wheels consist of a pressure cast wheel surface and a flow formed rim structure.  Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight. 

 Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in a Black painted finish with a stainless steel lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Specs:

  • 18x8.5 ET35 - qty 4
  • Black
  • Center Bore: PFS
  • Bolt Pattern: 5x120
BBS
Part #: ch015bpoKT
Price: $1760.00 (USD) 
Ships on Mar 7, 2018
Quantity:   
19

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

LM wheels consist of a pressure cast wheel surface and a flow formed rim structure.  Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in Diamond Silver with a diamond cut lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Specs:

  • 19x8.5 ET32 - qty 4
  • Diamond Silver with a diamond cut lip
  • Center Bore: PFS
  • Bolt Pattern: 5x120
BBS
Part #: lm227dspkKT
Price: $4520.00 (USD) 
Ships on Mar 7, 2018
Quantity:   
19

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

LM-R wheels consist of a pressure cast wheel surface and a flow formed rim structure.  Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in Diamond Silver with a diamond cut lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Specs:

  • 19x8.5 ET32 - qty 2
  • ​19x9.5 ET25 - qty 2
  • Diamond Silver with a diamond cut lip
  • Center Bore: PFS
  • Bolt Pattern: 5x120
BBS
Part #: lmrdspk19sKT
Price: $4570.00 (USD) 
Ships on Mar 7, 2018
Quantity:   
19

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

LM wheels consist of a pressure cast wheel surface and a flow formed rim structure.  Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in Gold with a diamond cut lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Specs:

  • 19x8.5 ET32 - qty 2
  • 19x9.5 ET32 - qty 2
  • Gold center with a diamond cut lip
  • Center Bore: PFS
  • Bolt Pattern: 5x120
BBS
Part #: lmgpk19sKT
Price: $4720.00 (USD) 
Ships on Mar 7, 2018
Quantity:   
19

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

SR wheels consist of a pressure cast wheel surface and a flow formed rim structure.  Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in Satin Grey and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Specs:

  • 19x8.5 ET32 - qty 4
  • Satin Grey
  • Center Bore: PFS
  • Bolt Pattern: 5x120
BBS
Part #: sr026sgKT
Price: $1480.00 (USD) 
Ships on Mar 7, 2018
Quantity:   
19

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

CI-R wheels consist of a pressure cast wheel surface and a flow formed rim structure.  Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in a Satin Black and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Specs:

  • 19x8.5 ET35 - qty 4
  • Satin Black
  • Center Bore: PFS
  • Bolt Pattern: 5x120
BBS
Part #: ci2102bpoKT
Price: $2380.00 (USD) 
Ships on Mar 7, 2018
Quantity:   
19

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

RS style wheels combine a lightweight forged construction with an eye-catching yet tasteful design to bring you some of the finest two-piece wheels on the market. 

Forged wheels are created by crushing a solid block of aluminum into the desired shape using an extreme amount of pressure. This creates a wheel that is incredibly strong while remaining relatively lightweight. Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in a silver painted finish with a diamond cut lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Specs:

  • 19x9.5 style RS Wheels - qty 4
  • Diamond Silver
  • Offset: 35mm 
  • Center Bore: PFS
  • Bolt Pattern: 5x120
BBS
Part #: rs959dspkKT
Price: $4720.00 (USD) 
Ships on Mar 7, 2018
Quantity:   
19

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

CH-R wheels consist of a pressure cast wheel surface and a flow formed rim structure.  Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

 Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in a Black painted finish with a polished lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Specs:

  • 19x8.5 ET32 - qty 2
  • 19x9.5 ET35 - qty 2
  • Black
  • Center Bore: PFS
  • Bolt Pattern: 5x120
BBS
Part #: chbpo19sKT
Price: $2400.00 (USD) 
Ships on Mar 7, 2018
Quantity:   
19

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

RS style wheels combine a lightweight forged construction with an eye-catching yet tasteful design to bring you some of the finest two-piece wheels on the market. 

Forged wheels are created by crushing a solid block of aluminum into the desired shape using an extreme amount of pressure. This creates a wheel that is incredibly strong while remaining relatively lightweight. Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in a silver painted finish with a diamond cut lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Specs:

  • 19x8.5 RS Wheels - qty 4
  • Diamond Silver
  • Offset: 32mm 
  • Center Bore: PFS
  • Bolt Pattern: 5x120
BBS
Part #: rg759hdskKT
Price: $3700.00 (USD) 
Ships on Mar 7, 2018
Quantity:   
18

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

CH-R wheels consist of a pressure cast wheel surface and a flow formed rim structure.  Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

 Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in a Titanium painted finish with a polished lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Specs:

  • 18x8 ET40 - qty 2
  • 18x9 ET44 - qty2
  • Titanium 
  • Center Bore: PFS
  • Bolt Pattern: 5x120
BBS
Part #: chtipo18sKT
Price: $2080.00 (USD) 
Ships on Mar 7, 2018
Quantity:   
18

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

CH-R wheels consist of a pressure cast wheel surface and a flow formed rim structure.  Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

 Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in a Black painted finish with a polished lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Specs:

  • 18x8 ET40 - qty 2
  • 18x9 ET44 - qty2
  • Black
  • Center Bore: PFS
  • Bolt Pattern: 5x120
BBS
Part #: chbpo18sKT
Price: $2080.00 (USD) 
Ships on Mar 7, 2018
Quantity:   
19

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

CX wheels consist of a pressure cast wheel surface and a flow formed rim structure.  Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in Gloss Black with a diamond cut face and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Specs:

  • 19x8.5 ET32 - qty 4
  • Gloss Black with a diamond cut face
  • Center Bore: PFS
  • Bolt Pattern: 5x120
BBS
Part #: cx001bpkKT
Price: $1960.00 (USD) 
Ships on Mar 7, 2018
Quantity:   
19

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

SR wheels consist of a pressure cast wheel surface and a flow formed rim structure.  Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in Volcano Grey with a diamond cut face and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Specs:

  • 19x8.5 ET32 - qty 4
  • Volcano Grey
  • Center Bore: PFS
  • Bolt Pattern: 5x120
BBS
Part #: sr026vgpkKT
Price: $1560.00 (USD) 
Ships on Mar 7, 2018
Quantity:   
19

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

LM-R wheels consist of a pressure cast wheel surface and a flow formed rim structure.  Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in Diamond Black with a diamond cut lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Specs:

  • 19x8.5 ET32 - qty 2
  • ​19x9.5 ET25 - qty 2
  • Diamond Black with a diamond cut lip
  • Center Bore: PFS
  • Bolt Pattern: 5x120
BBS
Part #: lmrdbpk19sKT
Price: $4570.00 (USD) 
Ships on Mar 7, 2018
Quantity:   
18

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

RG style wheels combine a lightweight forged construction with an eye-catching yet tasteful design to bring you some of the finest two-piece wheels on the market. 

Forged wheels are created by crushing a solid block of aluminum into the desired shape using an extreme amount of pressure. This creates a wheel that is incredibly strong while remaining relatively lightweight. Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in a Diamond Black painted finish with a diamond cut lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Specs:

  • 18x8.5 ET38 - qty 2
  • 19x9 ET45 - qty 2
  • Diamond Black
  • Center Bore: 72.5
  • Bolt Pattern: 5x120
BBS
Part #: rghdbk18sKT
Price: $3020.00 (USD) 
Ships on Mar 7, 2018
Quantity:   
19

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

CH-R wheels consist of a pressure cast wheel surface and a flow formed rim structure.  Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in a Brilliant Silver painted finish with a polished lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Specs:

  • 19x8.5 ET32 - qty 2
  • 19x9.5 ET35 - qty 2
  • Brilliant Silver
  • Center Bore: PFS
  • Bolt Pattern: 5x120
BBS
Part #: chspo19sKT
Price: $2400.00 (USD) 
Ships on Mar 7, 2018
Quantity:   
18

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

RF style wheels combine a lightweight forged construction with an eye-catching yet tasteful design to bring you some of the finest two-piece wheels on the market. 

Forged wheels are created by crushing a solid block of aluminum into the desired shape using an extreme amount of pressure. This creates a wheel that is incredibly strong while remaining relatively lightweight. Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come with a black painted finish and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Specs:

  • 18x8 ET35 - qty 2 
  • 18x9 ET 47 - qty 2
  • Diamond Black
  • Offset: 35mm 
  • Center Bore: 72.5mm
  • Bolt Pattern: 5x120
BBS
Part #: rfdbk18sKT
Price: $2920.00 (USD) 
Ships on Mar 7, 2018
Quantity:   
19

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

LM wheels consist of a pressure cast wheel surface and a flow formed rim structure.  Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in Gold with a diamond cut lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Specs:

  • 19x8.5 ET32 - qty 4
  • Gold center with a diamond cut lip
  • Center Bore: PFS
  • Bolt Pattern: 5x120
BBS
Part #: lm278gpkKT
Price: $4540.00 (USD) 
Ships on Mar 7, 2018
Quantity:   
19

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

RS style wheels combine a lightweight forged construction with an eye-catching yet tasteful design to bring you some of the finest two-piece wheels on the market. 

Forged wheels are created by crushing a solid block of aluminum into the desired shape using an extreme amount of pressure. This creates a wheel that is incredibly strong while remaining relatively lightweight. Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in a black painted finish with a diamond cut lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Specs:

  • 19x9.5 RS Wheels - qty 4
  • Diamond Black
  • Offset: 35mm 
  • Center Bore: PFS
  • Bolt Pattern: 5x120
BBS
Part #: rs959dbpkKT
Price: $4720.00 (USD) 
Ships on Mar 7, 2018
Quantity:   
19

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

CH-R wheels consist of a pressure cast wheel surface and a flow formed rim structure.  Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

 Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in a Titanium painted finish with a polished lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Specs:

  • 19x8.5 ET32 - qty 2
  • 19x9.5 ET35 - qty 2
  • Titanium 
  • Center Bore: PFS
  • Bolt Pattern: 5x120
BBS
Part #: chtipo19sktKT
Price: $2400.00 (USD) 
Ships on Mar 7, 2018
Quantity:   
19

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

LM wheels consist of a pressure cast wheel surface and a flow formed rim structure.  Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in Diamond Black with a diamond cut lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Specs:

  • 19x8.5 ET32 - qty 4
  • Diamond Black center with a diamond cut lip
  • Center Bore: PFS
  • Bolt Pattern: 5x120
BBS
Part #: lm278dbpkKT
Price: $4540.00 (USD) 
Ships on Mar 7, 2018
Quantity:   
Get notified about money saving
specials & deals for your BMW
enter your email address
  • 22 years of BMW Tuning.
  • Award winning service.
  • 10,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook



    • 1-800-280-6966
      Mon-Thur 9am-6pm ET, Fri 9am-5pm ET

      • © TurnerMotorsport.com 1993-2018. All Rights Reserved.