Find Parts That Fit Your Vehicle

BC Racing Coilovers


BC Racing BR Series Coilover Suspension Kit - E46 M3
BC Racing BR Series Coilover Suspension Kit - E46 M3
Looking for coilovers that will provide reliability on st...
BC Racing - Corporate Logo
T#:555853
Part#: I-14-BR
In Stock
New Item
$995.00
$995.00

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

Specs and Features:

  • 8k Front & 12k Rear Spring Rate
  • Linear front & S-Barrel rear springs
  • Valved specifically to spring style and rate
  • Camber Plate Front Mounts
  • Aluminum and Rubber Rear Mounts
  • Black Powder Coated Components
  • All OE style brackets and mounting for perfect fit
  • 30 Levels of Simultaneous Compression and Rebound Dampening
  • 2 inch minimum and 3+ Inches of total potential drop
  • Great for Track, Street, and any other conditions
BC Racing Rear Damping Adjustment Extenders - BR Type
BC Racing Rear Damping Adjustment Extenders - BR Type
The rear damping adjuster on coilovers is usually hidden ...
BC Racing - Corporate Logo
T#:555864
Part#: DMP-EXT
In Stock
New Item
$34.95
$34.95

The rear damping adjuster on coilovers is usually hidden under a bunch of hard to reach interior panels requiring you to remove carpet, panels and sometimes even the rear seat back in order to adjust the dampening on your BC rear coilovers. The BC Racing rear extender adjuster allow you to make these adjustments without removing the rear interior. Simple make two small holes in the interior above the adjuster and the extension can be passed through the interior panels. Now the adjustments can be performed from above.

Each orders Includes 2 BC Racing Rear Dampening Extenders

Made to order - For use with most BC Racing BR Series Coilover Systems - Please contact customer service and provide year/make/model and BC Racing kit type prior to ordering

BC Racing BR Series Coilover Suspension Kit - E60 M5
BC Racing BR Series Coilover Suspension Kit - E60 M5
Looking for coilovers that will provide reliability on st...
BC Racing - Corporate Logo
T#:555852
Part#: I-15-BR
In Stock
New Item
$995.00
$995.00

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

Specs and Features:

  • 8k Front & 5k Rear Spring Rate
  • S-Barrel front & Linear rear springs
  • Valved specifically to spring style and rate
  • Aluminum and Rubber Front Mounts
  • Aluminum and Rubber Rear Mounts
  • Black Powder Coated Components
  • All OE style brackets and mounting for perfect fit
  • 30 Levels of Simultaneous Compression and Rebound Dampening
  • 2 inch minimum and 3+ Inches of total potential drop
  • Great for Track, Street, and any other conditions

BC Racing BR Series Coilover Suspension Kit - E82/88 128i 135i
BC Racing BR Series Coilover Suspension Kit - E82/88 128i 135i ...
Looking for coilovers that will provide reliability on st...
BC Racing - Corporate Logo
T#:555856
Part#: I-11-BR
In Stock
New Item
$995.00
$995.00

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

Specs and Features:

  • 8k Front & 12k Rear Spring Rate
  • S-Barrel front & Linear rear springs
  • Valved specifically to spring style and rate
  • Camber Plates Front Mounts
  • Aluminum and Rubber Rear Mounts
  • Black Powder Coated Components
  • All OE style brackets and mounting for perfect fit
  • 30 Levels of Simultaneous Compression and Rebound Dampening
  • 2 inch minimum and 3+ Inches of total potential drop
  • Great for Track, Street, and any other conditions

BC Racing BR Series Coilover Suspension Kit - E39 525i 528i 530i 540i
BC Racing BR Series Coilover Suspension Kit - E39 525i 528i 530i 540...
Looking for coilovers that will provide reliability on st...
BC Racing - Corporate Logo
T#:555861
Part#: I-06-BR
In Stock
New Item
$995.00
$995.00

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

Specs and Features:

  • 8k Front & 6k Rear Spring Rate
  • S-Barrel front & Linear rear springs
  • Valved specifically to spring style and rate
  • Camber Plate Front Mounts
  • Aluminum and Rubber Rear Mounts
  • Black Powder Coated Components
  • All OE style brackets and mounting for perfect fit
  • 30 Levels of Simultaneous Compression and Rebound Dampening
  • 2 inch minimum and 3+ Inches of total potential drop
  • Great for Track, Street, and any other conditions
BC Racing BR Series Coilover Suspension Kit - E46 Non-M RWD
BC Racing BR Series Coilover Suspension Kit - E46 Non-M RWD ...
Looking for coilovers that will provide reliability on st...
BC Racing - Corporate Logo
T#:555863
Part#: I-02-BR
In Stock
New Item
$995.00
Free Shipping

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

Specs and Features:

  • 8k Front & 12k Rear Spring Rate
  • Linear front & S-Barrel rear springs
  • Valved specifically to spring style and rate
  • Camber Plate Front Mounts
  • Aluminum and Rubber Rear Mounts
  • Black Powder Coated Components
  • All OE style brackets and mounting for perfect fit
  • 30 Levels of Simultaneous Compression and Rebound Dampening
  • 2 inch minimum and 3+ Inches of total potential drop
  • Great for Track, Street, and any other conditions

BC Racing BR Series Coilover Suspension Kit - E90/2 M3 (without EDC)
BC Racing BR Series Coilover Suspension Kit - E90/2 M3 (without EDC)...
Looking for coilovers that will provide reliability on st...
BC Racing - Corporate Logo
T#:555837
Part#: I-39-BR
In Stock
New Item
20% off MSRP $1,250.00
$995.00
20% off MSRP $1,250.00
$995.00

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

Specs and Features:

  • 7k Front & 14k Rear Spring Rate
  • S-Barrel front & Linear rear springs
  • Valved specifically to spring style and rate
  • Camber Plate Front Mounts
  • Aluminum and Rubber Rear Mounts
  • Black Powder Coated Components
  • All OE style brackets and mounting for perfect fit
  • 30 Levels of Simultaneous Compression and Rebound Dampening
  • 2 inch minimum and 3+ Inches of total potential drop
  • Great for Track, Street, and any other conditions
BC Racing BR Series Coilover Suspension Kit - E90 325i 328i 330i 335d 335i
BC Racing BR Series Coilover Suspension Kit - E90 325i 328i 330i 335...
Looking for coilovers that will provide reliability on st...
BC Racing - Corporate Logo
T#:555862
Part#: I-03-BR
In Stock
New Item
$995.00
$995.00

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

Specs and Features:

  • 8k Front & 12k Rear Spring Rate
  • S-Barrel front & Linear rear springs
  • Valved specifically to spring style and rate
  • Camber Plate Front Mounts
  • Aluminum and Rubber Rear Mounts
  • Black Powder Coated Components
  • All OE style brackets and mounting for perfect fit
  • 30 Levels of Simultaneous Compression and Rebound Dampening
  • 2 inch minimum and 3+ Inches of total potential drop
  • Great for Track, Street, and any other conditions

BC Racing BR Series Coilover Suspension Kit - E21 320i
BC Racing BR Series Coilover Suspension Kit - E21 320i
Looking for coilovers that will provide reliability on st...
BC Racing - Corporate Logo
T#:555833
Part#: I-43-BR
In Stock
New Item
12% off MSRP $995.00
$872.50
Limited Qty Sale
12% off MSRP $995.00
$872.50
Limited Qty Sale

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

For vehicles with 51mm front struts - Requires being welded in to existing suspension

Specs and Features:

  • 7k Front & 5k Rear Spring Rate
  • Linear front & Linear rear springs
  • Valved specifically to spring style and rate
  • Camber Plate Front Mounts
  • Aluminum and Rubber Rear Mounts
  • Black Powder Coated Components
  • All OE style brackets and mounting for perfect fit
  • 30 Levels of Simultaneous Compression and Rebound Dampening
  • 2 inch minimum and 3+ Inches of total potential drop
  • Great for Track, Street, and any other conditions

BC Racing BR Series Coilover Suspension Kit - F30 xDrive 320i 328d 328i 330i 335i 340i
BC Racing BR Series Coilover Suspension Kit - F30 xDrive 320i 328d 3...
Looking for coilovers that will provide reliability on st...
BC Racing - Corporate Logo
T#:555835
Part#: I-41-BR
In Stock
New Item
20% off MSRP $1,250.00
$995.00
20% off MSRP $1,250.00
$995.00

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

For vehicles with 3-Bolt Top Mounts

Specs and Features:

  • 6k Front & 12k Rear Spring Rate
  • V-Barrel front & Linear rear springs
  • Valved specifically to spring style and rate
  • Reuses OE Front Mounts
  • Rear Rubber Mounts
  • Black Powder Coated Components
  • All OE style brackets and mounting for perfect fit
  • 30 Levels of Simultaneous Compression and Rebound Dampening
  • 2 inch minimum and 3+ Inches of total potential drop
  • Great for Track, Street, and any other conditions
BC Racing BR Series Coilover Suspension Kit - E39 525i 528i 530i 540i
BC Racing BR Series Coilover Suspension Kit - E39 525i 528i 530i 540...
Looking for coilovers that will provide reliability on st...
BC Racing - Corporate Logo
T#:555834
Part#: I-42-BR
In Stock
New Item
20% off MSRP $1,250.00
$995.00
20% off MSRP $1,250.00
$995.00

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

Specs and Features:

  • 8k Front & 8k Rear Spring Rate
  • S-Barrel front & Linear rear springs
  • Valved specifically to spring style and rate
  • Camber Plate Front Mounts
  • Aluminum and Rubber Rear Mounts
  • Black Powder Coated Components
  • All OE style brackets and mounting for perfect fit
  • 30 Levels of Simultaneous Compression and Rebound Dampening
  • 2 inch minimum and 3+ Inches of total potential drop
  • Great for Track, Street, and any other conditions
BC Racing BR Series Coilover Suspension Kit - E92 328i 335i/is
BC Racing BR Series Coilover Suspension Kit - E92 328i 335i/is ...
Looking for coilovers that will provide reliability on st...
BC Racing - Corporate Logo
T#:554771
Part#: I-18-BR
In Stock
$995.00
$995.00

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

Specs and Features:

  • 8k Front & 12k Rear Spring Rate
  • S-Barrel front & Linear rear springs
  • Valved specifically to spring style and rate
  • Camber Plate Front Mounts
  • Aluminum and Rubber Rear Mounts
  • Black Powder Coated Components
  • All OE style brackets and mounting for perfect fit
  • 30 Levels of Simultaneous Compression and Rebound Dampening
  • 2 inch minimum and 3+ Inches of total potential drop
  • Great for Track, Street, and any other conditions


BC Racing BR Series Extreme Low Coilovers - E90/2 325xi 328xi 330xi 335xi
BC Racing BR Series Extreme Low Coilovers - E90/2 325xi 328xi 330xi ...
Looking for coilovers that will provide reliability on st...
BC Racing - Corporate Logo
T#:555823
Part#: I-59E-BR
In Stock
New Item
20% off MSRP $1,250.00
$995.00
20% off MSRP $1,250.00
$995.00

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

Specs and Features:

  • 6k Front & 12k Rear Spring Rate
  • V-Barrel front & Linear rear springs
  • Valved specifically to spring style and rate
  • Camber Plate Front Mounts
  • Aluminum and Rubber Front Mounts
  • Black Powder Coated Components
  • All OE style brackets and mounting for perfect fit
  • 30 Levels of Simultaneous Compression and Rebound Dampening
  • Extreme Drop version allows additional 1-1.5" lowering over the standard 2-4" lowering from traditional BR suspension kits
  • Shocks are 1" shorter in length and springs are specifically selected for greater lowering capabilities
  • Great for Track, Street, and any other conditions
BC Racing BR Series Coilover Suspension Kit - E36 M3
BC Racing BR Series Coilover Suspension Kit - E36 M3
Looking for coilovers that will provide reliability on st...
BC Racing - Corporate Logo
T#:555843
Part#: I-26-BR
In Stock
New Item
20% off MSRP $1,250.00
$995.00