Find Parts That Fit Your Vehicle

BMW Transmission Mounts

Transmission mounts locate the transmission to the chassis of the car. Nearly all BMW transmission mounts are made of rubber which is great for absorbing vibrations and noise but may not last very long. Oil from a failing transmission seals will also contribute to premature rubber mount wear. Worn out tranny mounts can lead to harder and imprecise shifting and maybe even a dreaded mis-shift. Rubber trans mounts are generally inexpensive so replacing them every few years will not break the bank. We also offer upgraded stiffer rubber or urethane mounts that last longer and deflect less so the transmission stays in its proper place and the shift linkage is not mis-aligned.

Turner Motorsport Solid Aluminum Transmission Mount Set - E34 E36 E39 E46 E82 E90 E92 Z3 Z4
Turner Motorsport Solid Aluminum Transmission Mount Set - E34 E36 E3...
If allowed in the rules these solid aluminum transmissio...
Turner Motorsport - Corporate Logo
T#:397210
Part#: 017730TMS03
In Stock
$71.95
Free Shipping

If allowed in the rules these solid aluminum transmission mounts offer many advantages over a urethane or Delrin mounts. It's no wonder that these mounts have found their way into the top BMW racers in the country. These are machined from solid aluminum and have zero deflection, engine torque will cause a rubber or urethane mount to flex or deflect allowing more torque to passed through the drive line (instead of being wasted winding up the mount). This puts the shift linkages in better consistent alignment. And unlike rubber or urethane the aluminum has zero wear and is not affected by leaking oil or other fluids so this is likely the last set of transmission mounts you will ever need. We very strongly recommend using the solid transmission and engine mounts together as a complete kit, mixing a rubber mount with a metal mount will cause undue stress on the mounting points and will lead to a failure. We never advise using a solid mount unless a corresponding solid mount is also used.

These are a no-compromise design for all-out racing use, full solid aluminum mounts should not be used on street-driven cars since there is no material to absorb vibration making these quite harsh for regular street use (track cars don't care about noise).

Product features and benefits:

  • Crisper throttle response, positive shifter location, direct power transfer
  • Precision machined billet 6061-T6 aluminum housing
  • Grade 10.9 stud - fear not, big turbo owners
  • Engineered in-house and made in America

This item fits the following BMWs:
1989-1995 E34 BMW 525i 530i 535i 540i M5
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1997-2003 E39 BMW 525i 528i 530i 540i M5
1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci M3
2008-2012 E82 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
2006-2012 E91 BMW 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe aEUR<

E36/E46/Z3/Z4 Turner Solid Aluminum Motor and Transmission Mount Kit
E36/E46/Z3/Z4 Turner Solid Aluminum Motor and Transmission Mount Kit...
If allowed in the rules these solid aluminum engine and t...
Turner Motorsport - Corporate Logo
T#:112
Part#: TDR9980001
In Stock
$224.95
Free Shipping
Made in the USA If allowed in the rules these solid aluminum engine and transmission mounts offer many advantages over a urethane or Delrin mounts. It's no wonder that these mounts have found their way into the top BMW racers in the country. We originally developed these mounts for E36 and E46 World Challenge racing but they also work perfect in BMW Modified and SCCA club racing and SpecE46 (SE46). These are machined from solid aluminum and have zero deflection. The engine torque will cause a rubber or urethane mount to flex or deflect. The stiffer the material the less movement there is and the more torque is passed through the driveline (instead of being wasted winding up the mount). At the transmission end the flex-free solid mounts will give smoother, crisper shifts since the transmission is no longer dancing on the pliable mount. This puts the shift linkages in better consistent alignment. And unlike rubber or urethane the aluminum has zero wear and is not affected by leaking oil or other fluids so this is likely the last set of motor and transmission mounts you will ever need. We have designed these mounts so the engine is 5mm lower and the transmission is 1mm lower than the factory mounts. This helps lower the center of gravity for better balance and handling. We very strongly recommend using the transmission and engine mounts together as a complete kit. Mixing a rubber mount with a metal mount will cause undue stress on the mouting points and will lead to a failure. We never advise using a solid mount unless a corresponding solid mount is also used. This kit fits the E36, E46, Z3, and Z4 6 cylinder models listed below, including M3 models.

These are a no-compromise design for all-out racing use. Full solid aluminum mounts should not be used on street-driven cars. Because there is no material to absorb vibration these will be quite harsh for regular street use (track cars don't care about noise).

Subframe reinforcement kits are very strongly recommended to go along with these solid motor mounts to reduce the risk of damage to the subframe. The motor mount section of the subframe should be reinforced to prevent stress and failure of the subframe.

This item fits the following BMWs:
1992-1999 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2006 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci M3
2001-2006 SpecE46 BMW 330i 330ci
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2005 E85 BMW Z4 2.5i Z4 3.0i
2006-2008 E85 BMW Z4 M Roadster M Coupe
E9X M3 Turner Motorsport Racing Delrin/Aluminum Motor and Transmission Mount Set
E9X M3 Turner Motorsport Racing Delrin/Aluminum Motor and Transmissi...
These solid motor and transmission mounts for the E9X M3 ...
Turner Motorsport - Corporate Logo
T#:177909
Part#: TDR90809MT
In Stock
$708.95
Free Shipping
These solid motor and transmission mounts for the E9X M3 last a lot longer than factory rubber mounts and do not bind or 'wind up' as torque is transmitted through them (this means more power is directed through the driveline to the wheels). These mounts were developed over a number of years for our Grand-Am GS-class E92 M3s. This endurance racing format is perfect for developing parts that not only perform but are also durable under the harshest conditions you can expect. For the E9X M3, we tried and tested a number of motor and trans designs before deciding on this one as the strongest and best design under Grand-Am rules (non-metallic material made to the same dimensions as the original part). We use a special solid Delrin material on the motor mounts that is very heat resistant and sandwiched between aluminum mounting layers. This reinforces and gives additional strength to the Delrin and still meets Grand-Am rules for 'non-metallic' mounts. The heat resistance was a must given the close proximity of the M3's V8 headers to the engine mounts. We very strongly recommend using the transmission and engine mounts together as a complete kit. Mixing a rubber mount with a metal mount will cause undue stress on the mounting points and will lead to a failure. We never advise using a solid mount unless a corresponding solid mount is also used.

This is a set of two motor mounts and two transmission mounts. Solid mounting kits should be used for race only applications and only as a matching set.

This item fits the following BMWs:
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible

UUC HD Transmission Mounts and Enforcers
UUC HD Transmission Mounts and Enforcers
The stock manual transmission mounts are a weak point in ...
UUC - Corporate Logo
T#:348589
Part#: TMS3779
In Stock
Starting at $40.00
Free Shipping on orders $99 and up
The stock manual transmission mounts are a weak point in any BMW. They are a soft rubber, mainly designed to absorb vibration. But over time the rubber becomes more and more pliable and that causes the transmission to move excessively and the shifter linkage to bind, leading to tougher and inconsistent shifting. A mis-shift can lead to a very expensive engine rebuild.

The UUC tranny mounts are much stiffer than the originals and can be used with an aluminum cup to deflect load over a greater area. This will keep the transmission and shift linkage where they're supposed to be and virtually eliminate a mis-shift caused by the linkage binding. UUC's mounts are a heavy-duty rubber or urethane. Black rubber mounts are for street applications; Red/blue urethane is for track/light street use. Since both styles are a stiffer durometer than the stock rubber, some additional vibration and noise will make it into the cabin. With the Black mounts, the vibration is really not much more than stock. There will be a noticeable amount more with the Red/blue mounts. The Enforcer cups are ideal for track driven cars as they contribute to additional noise & vibration. Note that worn transmission mounts may also be masking vibrations from worn engine mounts too, and it's a good idea to replace your motor mounts at regular intervals or the same time as installing new transmission mounts. The optional aluminum Trans Mount Enforcers fit over the top of the mounts and give additional strength to the whole design (recommended for track cars, not generally needed or recommended on street cars.)

Price is for a pair of mounts with hardware. Enforcer Cups are additional.
Aluminum Enforcer Cups are an optional feature. Complete assembly pictured above.

This item fits the following BMWs:
1986-1988 E28 BMW 528e 533i 535i 535is M5
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is
1989-1995 E34 BMW 525i 530i 535i 540i M5
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1997-2003 E39 BMW 525i 528i 530i 540i M5
1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci M3
2008-2012 E82 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
2006-2012 E91 BMW 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

IRP Performance Polyurethane Engine and Transmission Mounts - E36 E46
IRP Performance Polyurethane Engine and Transmission Mounts - E36 E4...
Stock mounts are made from soft rubber and are sometimes ...
IRP - Individual Racing Parts - Corporate Logo
T#:401413
Part#: IRPEGS-2
In Stock
$199.95
Free Shipping

Stock mounts are made from soft rubber and are sometimes filled with fluid to give a car the most comfortable ride possible. The soft rubber and fluid helps to reduce the total amount of vibration, noise, and harshness (NVH) that is transferred into the cabin. The problem with this is driveline slop. The stock mounts allow a lot of excess movement and increases the amount of time it takes to transfer power to the wheels.

In order to address this issue, performance mounts can be substituted to reduce the amount of slop and transfer power to the wheel quicker. Two options for this are polyurethane mounts and solid mounts.

Solid mounts are great for an immediate transfer of power but allow for a ton of noise and vibration to be felt and heard in the cabin of the vehicle. This is great for the track where there aren't any issues with excess harshness, but as a daily driver, this can become an annoying pain in the neck.

The best middle ground is Polyurethane. Polyurethane is much stiffer than rubber and gives you the much stiffer feel you may be looking for. This allows for the increase in responsiveness, but isn't so extreme that it transfers all of the sound and vibrations into the cabin. This makes it much more comfortable for daily use while still reinforcing your driveline.

Features:

  • Aluminum and Polyurethane Construction
  • 80A Durometer Rating
  • New Hardware
ECS Urethane Transmission Mounts
ECS Urethane Transmission Mounts
A sloppy shifter is one of the common complaints of older...
ECS - Corporate Logo
T#:388091
Part#: 002705ECS
In Stock
Starting at $74.95
Free Shipping on orders $99 and up

A sloppy shifter is one of the common complaints of older BMWs. In addition to the shifter linkage the transmission mounts contribute to rough and clunky shifting. BMW transmission mounts are rubber and get softer over time. This allows the transmission to dance around which changes the geometry of the shift linkage and could make it harder to shift. These urethane transmission bushings are stiffer than the stock rubber mounts and won't let the transmission shift around as much. The round design also has more surface area than the stock mounts which helps spread the load. Because the urethane is stiffer, expect more vibration to make its way into the shift lever area. Engine motor mounts should also be considered as a cause for driveline vibration, transmission movement, and poor shifting. Consider replacing your motor mounts at the same time as your tranny mounts.

Price is for the pair of transmission mounts with hardware.

This item fits the following BMWs:
1989-1995 E34 BMW 525i 530i 535i 540i M5
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1997-2003 E39 BMW 525i 528i 530i 540i M5
1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci M3
2008-2012 E82 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
2006-2012 E91 BMW 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe


Density Line Solid Rubber Engine And Trans Mount Set - E82/E9X
Density Line Solid Rubber Engine And Trans Mount Set - E82/E9X ...
Collapsing and worn engine mounts can mean big trouble fo...
034Motorsport - Corporate Logo
T#:389756
Part#: 034-509-N5X
In Stock
$246.00
Free Shipping

Collapsing and worn engine mounts can mean big trouble for N52/N54/N55 cars. The stock mounts are filled with fluid that can leak or evaporate over time. That leaves the mount unstable and too flexible to properly support the engine. The side effects of a worn engine mount are: shaking and vibrating engine, driveline twist from engine torque that can break or snap bushings, and broken motor mount arms and bolts. If you're tired of replacing engine mounts you'll be very pleased wtih these solid rubber versions.

Not only are these more reliable than stock fluid-filled mounts, they are slightly stiffer than new stock mounts thanks to a solid rubber construction (no voids in the rubber) but designed for street use so they remain quiet and comfortable. The solid rubber has less deflection than a stock mount, so no wasted engine and transmission motion. Less wasted motion gives you more torque to the wheels (it's not spent twisting the engine) and better shifts.

Sold as a set of matching engine and transmission mounts.

This item fits the following BMWs:
2008-2013 E82 E88 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 325xi 328i 328xi 330i 330xi 335d 335i 335xi - Sedan
2007-2011 E91 BMW 325i 325xi 328i 328xi - Touring Wagon
2007-2013 E92 BMW 328i 328xi 335i 335is 335xi - Coupe
2007-2013 E93 BMW 328i 335i 335is - Convertible
2009-2016 E89 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

OEM Lemforder Transfer Case Support Mount - E46 Xi, E9X Xi, E60 Xi, E83 X3
OEM Lemforder Transfer Case Support Mount - E46 Xi, E9X Xi, E60 Xi, ...
This rubber-isolated mount replaces the stock mount found...
Lemforder - Corporate Logo
T#:6032
Part#: 22316773125
In Stock
$29.95
Free Shipping on orders $99 and up

This rubber-isolated mount replaces the stock mount found on the transmission cross-brace. The Xi models typically do not have traditional transmission mounts, leaving this as the only rubber-based wear item that needs periodic replacement. One required per vehicle.

These mounts can fail over time, leading to excessive vibration being transferred to the body. OEM LemfAPrder mounts are the perfect replacement to prevent vibrations and knocks from continuing.

OEM LemfAPrder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. LemfAPrder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


This item fits the following BMWs:
1999-2005 E46 BMW 325xi 330xi
2006+ E90 BMW 325xi 328xi 328i xDrive 330xi 335xi 335i xDrive - Sedan
2006+ E91 BMW 325xi 328xi 328i xDrive - Wagon
2007+ E92 BMW 328xi 328i xDrive 335xi 335i xDrive - Coupe
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si


E46 M3 Transmission Mount
E46 M3 Transmission Mount
This is the stock transmission mount for the E46 M3 (6 sp...
Genuine BMW - Corporate Logo
T#:193603
Part#: 22322282340
In Stock
11% off MSRP $34.63
$30.97
Free Shipping on orders $99 and up
11% off MSRP $34.63
$30.97
Free Shipping on orders $99 and up
This is the stock transmission mount for the E46 M3 (6 speed manual). As the rubber mounts wear there is more flex and twist as the engine delivers torque. This can also throw off the alignment of the shift linkage and lead to difficult shifting. If left alone the sloppiness in the driveline could lead to a mis-shift and an expensive engine rebuild. This is the Original BMW M3 transmission mount for the best quality.

Thanks to the higher engine output in the E46 M3, this mount can also be used on the non-M E36 and E46 models as an upgrade. A good mild / street upgrade if your transmission mounts are worn, but still want to maintain good ride comfort.

Sold individually, 2 needed per car.

This transmission mount fits the following BMWs:
1992-1999 E36 3 Series including 325i, 325is, 328i, 328is & 323is (5 speed manual)
1995-1999 E36 M3 (manual transmission)
1999-2005 E46 3 Series including 323i, 323Ci, 328i, 328Ci, 325i, 325Ci, 330i, 330Ci (manual transmission)
2001-2006 E46 M3 including coupe & convertible (manual transmission)

Genuine BMW Euro Transmission Crossmember - E36 BMW
Genuine BMW Euro Transmission Crossmember - E36 BMW
Looking to do a 6 speed swap or throw in an S54 drivetrai...
Genuine European BMW - Corporate Logo
T#:384329
Part#: 23702227892
In Stock
$32.99
Free Shipping on orders $99 and up

Looking to do a 6 speed swap or throw in an S54 drivetrain into your E36 BMW? This is the euro transmission cross-member that is used specifically for these swap to ensure mounting is as close stock-like fitment as possible.

Fits the following BMW's:
1992-1999 E36 BMW All submodels

OEM Lemforder Transmission Mount - E88 E82 E36 E46 E9X E39 F07 F10 F11 F06 F12 F13 F01 Z3 Z4
OEM Lemforder Transmission Mount - E88 E82 E36 E46 E9X E39 F07 F10 F...
Transmission mounts can fail over time, leading to excess...
Lemforder - Corporate Logo
T#:202174
Part#: 22316771219
In Stock
$8.95
Free Shipping on orders $99 and up

Transmission mounts can fail over time, leading to excessive vibration being transferred to the body. OEM LemfAPrder transmission mounts are the perfect replacement to prevent vibrations and knocks from continuing.

OEM LemfAPrder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. LemfAPrder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Standard OEM Transmission Mounts (Pair) for E36 E46 E90 E39 Z4 E85
Standard OEM Transmission Mounts (Pair) for E36 E46 E90 E39 Z4 E85 ...
OEM replacement transmission mounts. See applications bel...
Lemforder - Corporate Logo
T#:351069
Part#: 23711137817KT
In Stock
$25.10
Free Shipping on orders $99 and up
OEM replacement transmission mounts. See applications below Alternate part number 22316771219.

This item fits the following BMWs:
2008+ E82 BMW 128i 135i with Automatic Transmission
1992-1994 E36 BMW 325i 325is with Manual Transmission
1995-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 with Manual or Automatic Transmission
1996-1998 E36 BMW 318i 318is 318ti 318ic with Automatic Transmission
1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci with either Manual or Automatic Transmission
2006+ E90 BMW 325i 328i 330i 335i with Automatic Transmission
2007+ E92 BMW 328i 335i 335is with Automatic Transmission
2007+ E93 BMW 328i 335i with Automatic Transmission
1997-1999 E39 BMW 528i with Automatic Transmission
03/2001-2003 E39 BMW 525i, 530i with Automatic Transmission
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Roadster with either Manual or Automatic Transmission
2003-2005 Z4 BMW Z4 2.5i Z4 3.0i with Automatic or SMG transmission


IRP Performance Solid Engine and Transmission Mounts - E30 E36 E46
IRP Performance Solid Engine and Transmission Mounts - E30 E36 E46 ...
Stock mounts are made from soft rubber and are sometimes ...
IRP - Individual Racing Parts - Corporate Logo
T#:401414
Part#: IRPEGS-1
In Stock
$182.95
Free Shipping

Stock mounts are made from soft rubber and are sometimes filled with fluid to give a car the most comfortable ride possible. The soft rubber and fluid helps to reduce the total amount of vibration, noise, and harshness (NVH) that is transferred into the cabin. The problem with this is driveline slop. The stock mounts allow a lot of excess movement and increases the amount of time it takes to transfer power to the wheels.

In order to address this issue, performance mounts can be substituted to reduce the amount of slop and transfer power to the wheel quicker. Two options for this are polyurethane mounts and solid mounts.

The middle ground is Polyurethane. Polyurethane is much stiffer than rubber, but these still let a large amount of movement in comparison to solid mounts. These are great for sporty, aggressive street driving, but for the track are not ideal.

For the track, solid mounts are great. Solid mounts give you an immediate transfer of power, at the cost of increase NVH. This is great for the track where comfort is the least of your worries and power is all that is important.

Features:

  • Aluminum and Polyurethane Construction
  • 80A Durometer Rating
  • New Hardware
Transmission Mount - E9x M3, E60 M5, E63 M6
Transmission Mount - E9x M3, E60 M5, E63 M6
This is the Genuine BMW transmission mount for E9x M3 wit...
Genuine BMW - Corporate Logo
T#:49454
Part#: 22312283285
In Stock
15% off MSRP $25.90
$22.13
Free Shipping on orders $99 and up
15% off MSRP $25.90
$22.13
Free Shipping on orders $99 and up
This is the Genuine BMW transmission mount for E9x M3 with the S65 engine and E60 M5 with the S85 engine. Sold individually.

This item fits the following BMWs:
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible
2006-2010 E60 BMW M5
2006-2010 E63 BMW M6
OEM Lemforder Rubber Transmission Mount - 22316799330 - E30 E36 E84 E89
OEM Lemforder Rubber Transmission Mount - 22316799330 - E30 E36 E84 ...
Lemforder BMW Rubber MountingLemforder is a supplier of p...
Lemforder - Corporate Logo
T#:397937
Part#: 22316799330
In Stock
$9.95
Free Shipping on orders $99 and up