Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

BMW Oil Filters & Oil Filter Kits

BMW Oil Filters & Oil Filter Kits What is more important to your engine than its oil supply? You can change your oil as many times as you want but if you don't change the oil filter you might as well dump the old oil back in! Replace your oil filter with every oil change (per BMW's recommendation) and you'll never worry about dirty oil again. We supply filters from the OEM Suppliers to BMW - Mahle, Mann, or OE BMW.
For accurate results, specify your model below.
Oil Filter Kit - N20 Engine - E89 Z4, F10 528i, F30 328i This is an oil filter service kit for the BMW N20 four-cylinder with the black plastic oil filter housing (not aluminum housing). This is the OEM oil filter kit made with the same materials and design as the original oil filter used in BMW dealers (but at a better price!). The kit includes the oil filter, housing cap o-ring, and plastic plug.

N20 application note: BMW used different oil filter housings for RWD and AWD models. This filter kit fits RWD models only .

This item fits the following BMWs:
2012+ F30 BMW 320i 328i - Sedan
2011+ F10 BMW 528i
2009+ Z4 BMW Z4 sDrive28i
Genuine BMW
Part #: 11427634291
Price: $14.78 (USD) 
$17.25 (14% off MSRP)
Ships in 4 days
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Oil Filter - E70 X5M, E71 X6M, F10 M5, F12 M6 - S63 BiTurbo Engine This is an OEM oil filter for the F10 M5 F12 M6 X5M X6M M3 with S63 BiTurbo engine includes the filter, seal and o-ring.

This Oil Filter fits the following BMWs:
2010+ E70 BMW X5M
2010+ E71 BMW X6M
2012+ F10 BMW M5
2012+ F12 BMW M6
Genuine BMW
Part #: 11427848321
Price: $26.88 (USD) 
$31.37 (14% off MSRP)
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Genuine BMW Oil Filter - 11427673541 - i01 i3 Genuine BMW Oil Filter -
This item fits the following BMW Chassis:
i01 i3

Genuine BMW
Part #: 11427673541
Price: $16.91 (USD) 
$19.45 (13% off MSRP)
Ships in 4 days
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Billet Aluminum Oil Filter Housing Cap - B58 3.0L BMW uses a lot of plastic in their engine components to save weight and money. Unfortunately, plastic is damaged easily and the factory oil filter cap needs a special tool to remove. This cap is designed to use the original o-ring seal so no special parts are required. You only have to remove the original 'filter cage' from the original cap and transfer it to the new aluminum cap. The satin black anodize blends in with the rest of your engine bay making this a smart and subtle upgrade.
ECS
Part #: 017306ECS01
Price: $89.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Mahle OEM Oil Filter for E46 M3, MZ3, MZ4 (S54 Engines) This is the replacement OEM oil filter kit for the S54 engine, as used in the E46 M3, Z4 M Roadster and M Coupe, as well as the 2001-2002 MZ3 M Roadster/Coupe (with S54 engine). This is the complete oil filter kit - filter, large o-ring for filter housing cover, small o-ring for bolt seal, flat washer for bolt, and copper seal ring for the drain bolt. It's everything you would need to complete an oil change - minus the Castrol 10W60 oil of course, which we sell at a great price. This kit is manufactured by Mahle - the original supplier to BMW for the 11427833769 BMW filter (factory filters come with the Mahle part number OX 187 printed on the cap).

Why Mahle over Mann? In the past we have sold a few different oil filters for the E46 M3 and S54 engines. But Mahle is the true OEM supplier for this part number. It fits perfectly and is the exact replacement part at nearly the same price as the slightly different Mann filter (and less than the factory BMW filter). For more detail, click here.

This filter fits the following BMWs:
2001-2006 E46 M3
2001-2002 MZ3 - M Roadster & M Coupe (S54)
2006-2008 MZ4 - M Roadster & M Coupe
Mahle
Part #: 11427833769ML
Price: $9.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
K&P Engineering High Performance Stainless Steel Micronic Oil Filter - N20 N52 N54 N55

Stainless steel filtration is not a new technology but is quickly gaining popularity in the automotive segment. With the ability to filter down as small as a paper filter element with the ability to be washed and reused!

The K&P Engineering filter element is made from medical grade, type 304 stainless steel micronic filter cloth to provide unmatched protection against oil contamination and resultant engine damage. A one inch square of this material flows an incredible 1.9 gallons of oil per minute at only 1 PSI pump pressure. The adhesive used in the filter assembly process is good to 600 degrees Fahrenheit, far above normal engine operating temperatures. A super strength nickel-plated neodymium rare earth magnet is installed in the top of the element for magnetic pre-filtering of the oil. The sophisticated bypass is engineered for proper differential pressures and consistent operation, delivering a greater percentage of filtered oil while being very easy to clean. The twist lock design assures positive filter element placement and allows for easy disassembly, inspection, and cleaning. The quad-ring gasket doubles the seal between the filter and the engine. Finally, the filter housing is carved out of solid 6061T6 billet aluminum, which not only looks trick but aids in dissipating heat.

K&P Engineering manufactures stainless steel filters for a vast array of engines around the world. Staying at the forefront of design and testing allows this company to offer a top tier product for your European vehicle.

Features:

  • Consistent filtering across entire filter surface
  • Superior ASTMF316 filtration performance
  • Magnetic Prefiltering
  • Progressive rate bypass combined with high flow characteristics of the filter media avoids unfiltered oil bypassing the filter during cold startup and high rpm
  • Easy inspection of engine contamination
  • Proven in Motorsports, Military and Aerospace applications for years. Technology is FAA approved for use in aircraft. 

At regular oil changes, clean to K&P's specifications for continued used - a true lifetime filter.

This part fits the following BMWs:
2012+ F30 3 Series Sedan 328i 328iX 328i 328iX 335i 335iX 
2006 - 2013 E9X 323i 325i 325xi 328i 328xi 330i 330xi 335i 335xi
2010 - 2016 F10 5 Series Sedan 528i 528iX 530i 535i 535iX 
2003 - 2006 E60 Sedan 525i 525xi 530i 530xi 
2007 - 2010 E60 528i 528xi 535i 535ix 
2009 - 2016 E89 Z4 Roadster Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i 
2014+ F22 2 Series Coupe 228i 228iX M235i M235iX
2007 - 2013 E88 1 Series Convertible 128i 135i
2008 - 2013 E82 1 Series Coupe 128i 135i 135is 1M Coupe
2012 - 2013 E70 X5 xDrive35d X5 xDrive35i
2007 - 2011 E70 X5 3.0sd X5 3.0si 

K&P Engineering
Part #: S38
Price: $99.00 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
Oil Filter Kit - N20 N55 Engines - E84 X1, E89 Z4, F10 528iX/535i, F25 X3, F30 320iX/328iX/335i This is an oil filter service kit for the BMW N20 four-cylinder and N55 six-cylinder, with the black plastic oil filter housing (not aluminum housing). This is the OEM oil filter kit made with the same materials and design as the original oil filter used in BMW dealers (but at a better price!). The kit includes the oil filter, housing cap o-ring, and washer.

N20 application note: BMW used different oil filter housings for RWD and AWD models. This filter kit fits AWD models only .

This item fits the following BMWs:
2012+ F30 BMW 320iX 328iX 335i - Sedan
2011+ F10 BMW 528iX 535i
2013+ E84 BMW X1 28i X1 35i
2011+ F25 BMW X3 xDrive28i X3 xDrive35i
2009+ Z4 BMW Z4 sDrive35i Z4 sDrive35is
Genuine BMW
Part #: 11427634292
Price: $14.78 (USD) 
$17.25 (14% off MSRP)
Ships in 4 days
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
OEM Oil Filter - E60 550i, E63 650i, E65 750i,760i E70 X5 4.8i This is an OEM oil filter for the N62 V8 engine includes the filter, seal and o-ring.

This item fits the following BMWs:
2006-2010 E60 BMW 550i
2006-2010 E63 BMW 650i
2005-2008 E65 BMW 750i 750li 760i 760li
2007-2013 E70 BMW X5 4.8i X5 xDrive48i
Mann
Part #: 11427542021
Price: $11.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
OEM Mahle/Mann Oil Filter - E36 318i/318ti 96-99, Z3 1.9 Replacement oil filter kit for many BMW 4 cylinders engines from 1989 to 1995 (see list below); This is for the BMW M44 16v 1.9 liter engine.

This filter fits the following BMWs:

1996-1999 E36 3 Series 4 cylinder - 318i, 318is, 318ic & 318ti
1996-1998 Z3 4 cylinder - Z3 1.9 Roadster
Mahle
Part #: 11421716192
Price: $8.15 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
K&P Engineering High Performance Stainless Steel Micronic Oil Filter - S50 S52 S54

Stainless steel filtration is not a new technology but is quickly gaining popularity in the automotive segment. With the ability to filter down as small as a paper filter element with the ability to be washed and reused!

The K&P Engineering filter element is made from medical grade, type 304 stainless steel micronic filter cloth to provide unmatched protection against oil contamination and resultant engine damage. A one inch square of this material flows an incredible 1.9 gallons of oil per minute at only 1 PSI pump pressure. The adhesive used in the filter assembly process is good to 600 degrees Fahrenheit, far above normal engine operating temperatures. A super strength nickel-plated neodymium rare earth magnet is installed in the top of the element for magnetic pre-filtering of the oil. The sophisticated bypass is engineered for proper differential pressures and consistent operation, delivering a greater percentage of filtered oil while being very easy to clean. The twist lock design assures positive filter element placement and allows for easy disassembly, inspection, and cleaning. The quad-ring gasket doubles the seal between the filter and the engine. Finally, the filter housing is carved out of solid 6061T6 billet aluminum, which not only looks trick but aids in dissipating heat.

K&P Engineering manufactures stainless steel filters for a vast array of engines around the world. Staying at the forefront of design and testing allows this company to offer a top-tier product for your European vehicle.

Features:

  • Consistent filtering across entire filter surface
  • Superior ASTMF316 filtration performance
  • 7 times the flow of comparable paper oil filters
  • Magnetic Prefiltering
  • Progressive rate bypass combined with high flow characteristics of the filter media avoids unfiltered oil bypassing the filter during cold startup and high rpm
  • No more cutting apart messy paper filters for trapped debris inspection
  • Proven in Motorsports, Military and Aerospace applications for years. Technology is FAA approved for use in aircraft. 

At regular oil changes, clean to K&P's specifications for continued used - a true lifetime filter.

This product fits the following BMWs:
1995 - 1999 E36 M3
2001 - 2006 E46 M3
1998 - 2002 E36/8 Z3 M Coupe
1998 - 2002 E36/7 Z3 M Roadster
2006 - 2008 E86 Z4 M Coupe
2006 - 2008 E85 Z4 M Roadster

K&P Engineering
Part #: S21
Price: $99.00 (USD) 
Ships on May 24, 2018
Free Shipping Free Shipping
Quantity:   
Oil Filter - E90 E92 E93 M3 - S65 Engine This is an OEM oil filter for the E9X M3 with S65 engine includes the filter, seal and o-ring.

This Oil Filter fits the following BMWs:
2008+ E90 3 Series M3 Sedan
2008+ E92 3 Series M3 Coupe
2008+ E93 3 Series M3 Convertible
Mann
Part #: 11427837997
Price: $17.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Magnetic Oil Drain Plug for Most BMWs Turn your oil drain plug into an effective metal particle filter! This drain plug fits virtually all BMWs, and has a SUPER strong magnet built into it's tip, trapping iron and steel contaminants and safely removing them from the circulation.

This is a must for ALL BMWs, and simply installs in place of your existing drain plug. With every oil change you perform on your BMW, you'll be able to inspect for metal shavings and debris. Many times, if something is going wrong on your BMW's engine, the drain plug can give you an early warning. Our championship race team uses this info all the time (Ever find a piece of a valve spring in your oil? We have!) Be sure to get one now, and make the swap next oil change!

This magentic drain plug most BMWs (except pre-1980's). It includes a new/fresh copper washer.

** Requires thin wall socket and very slight trimming of the undertray for E46 M3, Z4M, Z3M with S54 engine **


This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
1976-1981 E12 BMW 528i 530i
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
1997-2003 E39 BMW 525i 528i 530i M5
2004-2005 E60 BMW 525i 530i
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
2004-2006 E83 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2005 Z4 BMW Z4 2.5i Z4 3.0i
MTC
Part #: TMS1798
Price: $12.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Billet Aluminum Oil Filter Housing Cap - N20 N52 N54 N55 S55 BMW uses a lot of plastic in their engine components to save weight and money. Unfortunately, plastic is damaged easily and the factory oil filter cap needs a special tool to remove. This aluminum cap is much more sturdy and features a standard 17mm hex post on the top. 17mm is also the size of your engine oil drain plug, reducing the number of tools that you need to complete an oil change. This cap is designed to use the original o-ring seal so no special parts are required. You only have to remove the original 'filter cage' from the original cap and transfer it to the new aluminum cap. The satin black anodize blends in with the rest of your engine bay making this a smart and subtle upgrade.
ECS
Part #: 003296ECS01
Price: $89.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Oil Drain Plug With Gasket Ring - F80 M3, F82 M4 This is the oil drain plug that is mounted into the oil pan for M3 / M4 with S55 engine. The crush washer on the plug is not removable so a new drain plug is required when performing an oil change.
Genuine BMW
Part #: 11117849396
Price: $11.84 (USD) 
$13.90 (15% off MSRP)
Ships on May 23, 2018
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Genuine BMW Oil Travel Case for 1 liter Bottle This Genuine BMW oil travel case is perfect for holding a 1 liter /1 quart oil bottle for topping up between oil changes. The case has 3 velcro strips on the back to secure the case inside of the trunk. Case includes 2 hand wipes, 2 laminated cardboard funnels, 2 plastic gloves, and 2 cleaning cloths.
Genuine BMW
Part #: 83292158848
Price: $5.79 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
OEM Mahle/Mann Oil Filter - Most 2006+ 6 cylinder, N52/N54/N55/S55 Replacement oil filter kit for most 2006 and newer 6 cylinder BMWs (see list below). This filter is for the N52/N54/N55 engine, the engine used in 2006+ BMWs. It's also used in the 2015+ F80 M3/M4 but BMW also recommends replacing the oil drain plug at the same time (sold separately).

Alternate BMW part# 11 42 7 541 827 (11427541827).

N55 engine note - this filter works with the aluminum oil filter housing only (not plastic).

This filter fits the following BMWs:
2008+ E82 BMW 128i 135i 1M Coupe
2014+ F22 BMW M235i
2006+ E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335i 335xi 335i xDrive - Sedan
2006+ E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007+ E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007+ E93 BMW 328i 335i - Convertible
2012+ F30 BMW 320i xDrive 328i xDrive 335i 335i xDrive - Sedan
2013+ F31 BMW 328i xDrive 328d xDrive - Wagon
2013+ F32 BMW 428i xDrive 435i 435i xDrive - Coupe
2014+ F34 BMW 335i xDrive GT - Gran Tourismo
2015+ F80 BMW M3 - Sedan
2015+ F82 BMW M4 - Coupe
2015+ F83 BMW M4 - Convertible
2006-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive
2010+ F07 BMw 535i GT, 535i xDrive GT
2011+ F10 BMw 528i 535i 535i xDrive
2012+ F13 BMW 640i
2009+ F01 BMW 740i 740li
2006-2010 E83 BMW X3 3.0i X3 3.0si
2011+ F25 BMW X3 xDrive28i X3 xDrive35i
2007-2013 E70 BMW X5 3.0si X5 xDrive30i X5 xDrive35i
2007-2014 E71 BMW X6 xDrive35i
2006-2008 E85 BMW Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Mann
Part #: 11427566327
Price: $9.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
OEM Mahle/Mann Oil Filter - E60 M5, E63 M6 V10 This is a high quality German made OEM oil filter for all BMW V10 engines, including 2006, 2007, and newer M5 and M6. It includes any seal reals required.

This oil filter fits the following BMWs:

2006+ E60 M5
2006+ E63 M6
Mann
Part #: 11427834734
Price: $13.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
OEM Mahle/Mann Oil Filter E30 M3 1987-1991 (S14 Engine) Replacement oil filter kit for S14 engines, the 16v 4 cylinder powerplant that came in all 1987, 1988, 1989, 1990 & 1991 BMW M3. Replaces BMW part number 11421258039.

This oil filter fits the following BMWs:

1987-1991 E30 M3 2.3 & 2.5 liter
Mahle
Part #: OC25
Price: $5.95 (USD) 
Ships in 1 day
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Oil Filter Cap Tool - N20/N51/N52/N54/N55 Engines This tool allows easy removal of the oil filter cap on 2006 and newer BMW 6 cylinder engines. BMW designed the filter cap to be removed with a specific tool making this invaluable for DIY oil changes or shops with a lot of BMW business. It takes a 21mm hex wrench or socket on top.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
2012+ F30 BMW 328i 335i - Sedan
2015+ F80 BMW M3
2015+ F82 BMW M4
2006-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive
2010+ F07 BMw 535i GT, 535i xDrive GT
2011+ F10 BMW 528i 535i 535i xDrive
2012+ F13 BMW 640i
2006-2010 E83 BMW X3 3.0si
2011+ F25 BMW X3 xDrive28i X3 xDrive35i
2007-2013 E70 BMW X5 3.0si X5 xDrive30i X5 xDrive35i
2008+ E71 BMW X6 xDrive35i
2006-2008 E85 BMW Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Assenmacher Specialty Tools
Part #: 83300493936
Price: $24.95 (USD) 
Ships in 1 day
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
OEM Bosch Oil Filter - E30 E28 E34 - M20 2.5L 2.7L

The oil filter is one of the most simple and yet crucial components of your vehicle, preventing contaminants from flowing back into the engine causing excessive wear and damage. Why buy a cheap alternative when you can have peace of mind with this high quality Bosch oil filter?

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Bosch
Part #: 11421266773
Price: $6.49 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
OEM Mahle/Mann Oil Filter With Drain Plug - F80 M3, F82 M4 Replacement oil filter kit with a new drain plug for 2015+ F80 M3/F82 M4. This filter is for the S55 engine, used in the M3/M4 and includes the new drain bolt recommended by BMW during an oil change.

To purchase the oil filter kit without the drain plug,  click here.

This filter fits the following BMWs:
2015+  F80 BMW  M3 - Sedan
2015+  F82 BMW  M4 - Coupe
2015+  F83 BMW  M4 - Convertible
Packaged by Turner
Part #: 11427566327S55
Price: $22.90 (USD) 
Ships on May 23, 2018
Free Shipping Free Shipping
on orders $99 and up
OEM Oil Filter - E36 E46 E39 E60 X3 X5 Z3 Z4 - M52 M54 engine Replacement oil filter kit for many BMW 6-cylinders engines with black plastic oil filter cap. (see list below); Fits M52/M54 engines with the black plastic cap on the oil filter housing (not aluminum). Mahle, Mann, or Hengst brand. Alternate part # 11427512300

This filter fits the following BMWs:

1996-1999 E36 3 Series - 328i, 328is, 328ic (no M)
1999-2005 E46 3 Series - 323i/323Ci, 328i/328Ci, 325i, 325Ci, 325xi, 330i, 330Ci, & 330xi (no M)
1997-2003 E39 5 series 6 cyl - 525i, 528i, 530i
2004-2005 E60 5 Series 6 cyl - 525i, 525xi, 530i, 530xi
2004-2006 X3 - including X3 2.5i, X3 3.0i
2000-2006 X5 6 cylinder, X5 3.0i
1997-2002 Z3 Roadster - Z3 2.3, Z3 2.5, Z3 2.8 & Z3 3.0 (**no M)
2003-2005 Z4 Roadster - Z4 2.5i, Z4 3.0i (**no si or 2006+)
Mann
Part #: 11421427908
Price: $7.25 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
OEM Mahle/Mann Oil Filter - E24 635i/M6, E28 535i/M5, E32 735i, E34 535i/M5 Replacement oil filter kit for the M30 "big six" 12 valve inline 6 cylinder engine, found in many 1982 to 1993 BMWs.

This oil filter fits the following BMWs:

1977-1981 E12 5 Series - 528i, 530i
1982-1988 E28 5 Series - 535i, 535is, M5
1989-1993 E34 5 Series - 535i, M5
1976-1989 E24 6 Series - 630csi, 633csi, 635csi, M6
1977-1987 E23 7 Series - 733i, 735i
1988-1994 E32 7 Series - 735i, 735iL
Mahle
Part #: OX41D
Price: $5.25 (USD) 
Ships in 1 day
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
OEM Mahle/Mann - E36 318i 92-95, E30 318i 89-91 Replacement oil filter kit for many BMW 4 cylinders engines from 1989 to 1995 (see list below); This is for the BMW M42 16v 1.8 liter engine.

This filter fits the following BMWs:

1989-1991 E30 3 Series 4 cylinder - 318i, 318is 318ic
1992-1995 E36 3 Series 4 cylinder - 318i, 318is, 318ic & 318ti
Mahle
Part #: 11421727300
Price: $5.99 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Oil Filter - 2007+ MINI Cooper - MINI Cooper S - R56 R57 R55 This is a high quality German made OEM oil filter for all R55 R56 R57 MINI Cooper & MINI Cooper S from 2007+. It includes any seal reals required. Alternate part number 11427622446.

This item fits the following MINIs:
2007+ R56 MINI MINI Cooper MINI Cooper S
2008+ R55 MINI MINI Cooper Clubman MINI Cooper S Clubman
2009+ R57 MINI MINI Cooper Convertible MINI Cooper S Convertible
Mann
Part #: 11427557012
Price: $7.95 (USD) 
Ships in 2 Days
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Oil Filter Housing Cap - E60 E63 E65 E53 E70 With N62 /n73 Engine Replace your stripped or damaged oil filter cap with this Genuine BMW part. The oil filter cap on N62 and N73 engines is made of black plastic and can become cracked or stripped when replacing the oil filter.

This item fits the following BMWs:
2004-2010 E60 BMW 545i 550i
2004-2010 E63 BMW 645ci 650i
2002-2008 E65 BMW 745i 745li 750i 750li 760i 760li
2004-2006 E53 BMW X5 4.4i X5 4.8is
2007-2013 E70 BMW X5 4.8i X5 xDrive48i
Genuine BMW
Part #: 11427521353
Price: $38.55 (USD) 
$43.68 (12% off MSRP)
Ships in 4 days
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
K&P Engineering High Performance Stainless Steel Micronic Oil Filter - M50 M52 M54

Stainless steel filtration is not a new technology but is quickly gaining popularity in the automotive segment. With the ability to filter down as small as a paper filter element with the ability to be washed and reused!

The K&P Engineering filter element is made from medical grade, type 304 stainless steel micronic filter cloth to provide unmatched protection against oil contamination and resultant engine damage. A one inch square of this material flows an incredible 1.9 gallons of oil per minute at only 1 PSI pump pressure. The adhesive used in the filter assembly process is good to 600 degrees Fahrenheit, far above normal engine operating temperatures. A super strength nickel-plated neodymium rare earth magnet is installed in the top of the element for magnetic pre-filtering of the oil. The sophisticated bypass is engineered for proper differential pressures and consistent operation, delivering a greater percentage of filtered oil while being very easy to clean. The twist lock design assures positive filter element placement and allows for easy disassembly, inspection, and cleaning. The quad-ring gasket doubles the seal between the filter and the engine. Finally, the filter housing is carved out of solid 6061T6 billet aluminum, which not only looks trick but aids in dissipating heat.

K&P Engineering manufactures stainless steel filters for a vast array of engines around the world. Staying at the forefront of design and testing allows this company to offer a top-tier product for your European vehicle.

Features:

  • Consistent filtering across entire filter surface
  • Superior ASTMF316 filtration performance
  • Magnetic Prefiltering
  • Progressive rate bypass combined with high flow characteristics of the filter media avoids unfiltered oil bypassing the filter during cold startup and high rpm
  • Easy inspection of engine contamination
  • Proven in Motorsports, Military and Aerospace applications for years. Technology is FAA approved for use in aircraft. 

At regular oil changes, clean to K&P's specifications for continued used - a true lifetime filter.

This part fits the following BMWs:
1991 - 1999 E36 Coupe 323i 325is 328i
1993 - 1999 E36 Convertible 323i 325i 328i
1990 - 1999 E36 Sedan 325i 328i 
1989 - 1995 E34 525i, 530i, 
1998 - 2004 E39 Touring 525i 528i 
1996 - 2004 E39 Sedan 525i 528i 530i 
1999 - 2001 E46 Convertible 323ci 325ci 330ci
2002-2006 E46 Convertible 325ci 330ci
1998 - 2001 E46 323ci 325ci 330ci M3
2002 - 2006 E46 325ci 330ci
1998 - 2001 E46 Touring 323i 325i
2002 - 2006 E46 Touring 325i 325xi
1998 - 2001 E46 Sedan 323i 325i 328i 330i
2002 - 2006 E46 Sedan 325i 325xi 330i 330xi
2000 - 2006 E53 X5 SUV X5 X5 3.0i 

 

 

 

K&P Engineering
Part #: S37
Price: $99.00 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
OEM Mahle Oil Filter - F10, F12, F01, E70 X5, E71 X6 Replacement oil filter kit for most 2010 and newer V8 engine BMWs. This filter is for the N63 V8 engine and N74 V12 engine.

This item fits the following BMWs:
2010+ F07 BMW 550i GT, 550i xDrive GT
2011+ F10 BMW 550i 550i xDrive
2012+ F12 BMW 650i 650i xDrive
2013+ F06 BMW 650i Gran Coupe 650i xDrive Gran Coupe
2009+ F01 BMW 750i 750li 750i xDrive 750li xDrive 760li E70 BMW X5 xDve50i
2008+ E71 BMW X6 xDrive50i
Genuine BMW
Part #: 11427583220
Price: $19.19 (USD) 
$22.40 (14% off MSRP)
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Mahle
Part #: 11427673541
Price: $11.30 (USD) 
Ships in 2 Days
Quantity:   
OEM Hengst Oil Filter - 2004 & 2005 V8 (4.4L N62) Replacement oil filter kit for 4.4L N62 V8 engines, as found in 2004, 2005 V8 model BMWs.

This oil filter fits the following BMWs:

2004-2005 E60 5 Series - 545i
2004-2005 E63/E64 6 Series - 645Ci, 645Ci convertible
2002-2005 E65/E66 7 Series - 745i, 745Li
2004-2005 X5 SAV V8 incl X5 4.4, X5 4.8is
Hengst
Part #: 11427511161
Price: $11.95 (USD) 
Ships in 4 days
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
aFe Pro GUARD HD Oil Filter - N54/55 BMW Engine Made from a synthetic media that allows maximum filtration with minimal flow restriction to satisfy modern oil-hungry engines such as the N54 and N55.
AFE
Part #: 44-LF029
Price: $14.00 (USD) 
Direct Ship
Quantity:   
Schwaben 36mm 6-Point Oil Filter Socket - 3/8

Our 3/8-inch drive, 36mm, 6-point socket grips tight and won’t slip. Low profile oil filter housing removal socket fits in tight places. 

 

  • BMW M52 and M54
  • MINI Gen 1 (R50, R52, and R53)

 

Schwaben
Part #: OC-03
Price: $14.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
OEM Mahle Oil Filter Kit for Mini Cooper, Cooper S (R50, R53) Direct replacement OEM oil filter for the Mini Cooper, Cooper S (R50, R53)
Mahle
Part #: 11427512446
Price: $9.48 (USD) 
Ships in 2 Days
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
K&P Engineering High Performance Stainless Steel Micronic Oil Filter - S65 S85

Stainless steel filtration is not a new technology but is quickly gaining popularity in the automotive segment. With the ability to filter down as small as a paper filter element with the ability to be washed and reused!

The K&P Engineering filter element is made from medical grade, type 304 stainless steel micronic filter cloth to provide unmatched protection against oil contamination and resultant engine damage. A one inch square of this material flows an incredible 1.9 gallons of oil per minute at only 1 PSI pump pressure. The adhesive used in the filter assembly process is good to 600 degrees Fahrenheit, far above normal engine operating temperatures. A super strength nickel-plated neodymium rare earth magnet is installed in the top of the element for magnetic pre-filtering of the oil. The sophisticated bypass is engineered for proper differential pressures and consistent operation, delivering a greater percentage of filtered oil while being very easy to clean. The twist lock design assures positive filter element placement and allows for easy disassembly, inspection, and cleaning. The quad-ring gasket doubles the seal between the filter and the engine. Finally, the filter housing is carved out of solid 6061T6 billet aluminum, which not only looks trick but aids in dissipating heat.

K&P Engineering manufactures stainless steel filters for a vast array of engines around the world. Staying at the forefront of design and testing allows this company to offer a top-tier product for your European vehicle.

Features:

  • Consistent filtering across entire filter surface
  • Superior ASTMF316 filtration performance
  • Magnetic Prefiltering
  • Progressive rate bypass combined with high flow characteristics of the filter media avoids unfiltered oil bypassing the filter during cold startup and high rpm
  • Easy inspection of engine contamination
  • Proven in Motorsports, Military and Aerospace applications for years. Technology is FAA approved for use in aircraft. 

At regular oil changes, clean to K&P's specifications for continued used - a true lifetime filter.

 

Watch to learn how to clean a K&P oil filter

 

This part fits the following BMWs:
2006 - 2010 E60 M5 Sedan
2006 - 2010 E63 M6 Coupe & Convertible
2008 - 2013 E90 M3 Sedan
2008 - 2013 E92 M3 Coupe
2008 - 2013 E93 M3 Convertible

K&P Engineering
Part #: S39
Price: $119.00 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
OEM Mahle Oil Filter Kit for E36 E34 Z3 Replacement oil filter kit for many 6 cylinder BMWs (see list below). Fits M50, S50, S52 (US) engines that have the aluminum cap on the oil filter housing. This filter is the equivalent to BMW part number 11421730389.

This part may also come up as a replacement for BMW part number 11427833769. We have updated our applications to list the Mahle OX187 as the OEM replacement for the BMW 769 number. The OX68D can be used too but the OX187 is better suited to the extended oil changes that BMW recommends for cars made after 1999.

This filter fits the following BMWs:

1991-1995 E34 5 Series - 525i (M50 24v engine)
1992-1995 E36 3 Series - 325i, 325is & 325ic (M50/M50TU engines)
1995-1995 E36 M3 3.0 liter (S50US)
1996-1999 E36 M3 3.2 liter (S52US)
1998-2000 Z3 BMW M Roadster M Coupe (S52)
Mahle
Part #: OX68D
Price: $7.89 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
OEM Bosch Oil Filter Kit -- N52 N54 N55 N20

The oil filter is one of the most simple and yet crucial components of your vehicle, preventing contaminants from flowing back into the engine causing excessive wear and damage. Why buy a cheap alternative when you can have peace of mind with this high quality Bosch oil filter?

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Bosch
Part #: 11427566327
Price: $9.99 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Billet Aluminum Oil Filter Housing Cap - M52 M54 BMW uses a lot of plastic in their engine components to save weight and money. Unfortunately, plastic is damaged easily and the factory oil filter cap needs a special tool to remove. This aluminum cap is much more durable and features a standard 17mm hex and 36mm hex posts on the top. 17mm is also the size of your engine oil drain plug, reducing the number of tools that you need to complete an oil change. This cap is designed to use the original o-ring seal so no special parts are required. You only have to remove the original 'filter cage' from the original cap and transfer it to the new aluminum cap. The satin black anodize blends in with the rest of your engine bay making this a smart and subtle upgrade.
ECS
Part #: 002605ECS01A
Price: $89.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
OEM Oil Filter - E90 335d E70 X5 35d OEM BMW Replacement oil filter kit forBMW diesel engines Fits M57 diesel engines.

This item fits the following BMWs:
2006+ E90 BMW 335d - Sedan
2007-2013 E70 BMW X5 xDrive35d
Genuine BMW
Part #: 11427788460
Price: $17.06 (USD) 
$21.21 (20% off MSRP)
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Genuine BMW Set Oil-Filter Element - 11428570590 - i12 i8 Genuine BMW Set Oil-Filter Element -

This item fits the following BMWs:
2015+ I12 BMW i8
2014+ F55 MINI MINI Cooper, MINI Cooper S - 5 door
2014+ F56 MINI MINI Cooper, MINI Cooper S - 3 door
Genuine BMW
Part #: 11428570590
Price: $9.53 (USD) 
$11.12 (14% off MSRP)
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Oil Filter - F30 328d, F10 535d, F01 740d, F25 X3 28d, F15 X5 35d This Oil filter is for BMW's with the diesel N47N or N57N engine.

This item fits the following BMWs:
2012+ F30 BMW 328d 328d xDrive - Sedan
2013+ F31 BMW 328d xDrive - Wagon
2011+ F10 BMW 535d 535d xDrive
2009+ F01 BMW 740ld xDrive
2011+ F25 BMW X3 xDrive28d
2014+ F15 BMW X5 xDrive35d
Genuine BMW
Part #: 11428507683
Price: $9.25 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
OEM Oil Filter Kit - V8 & V12 Engines - E34, E39, E53 X5, E32, E38 Replacement oil filter kit for most V8 & V12 engines from 1988 to 2003 that have plastic ends on both sides of the filter. Oil filter includes gasket / seal rings. This filter is often sold under BMW part# 11 42 1 745 390 (11421745390). These are Mahle or Mann brand.

This oil filter fits the following BMWs:

1994-1995 E34 5 Series V8 - 530i, 530i Wagon, 540i
1997-2003 E39 5 Series V8 - 540i & M5
1992-1994 E32 7 Series - 740i, 740iL, 750iL
1995-2001 E38 7 Series - 740i, 740iL, 750iL
1992-1999 E31 8 Series - 840i 840ci 850i 850ci 850csi
2000-2003 X5 SAV V8 - X5 4.4, X5 4.6is
2000-2003 Z8

** Please be sure to verify your filter has plastic ends, as shown in the photo.
Mann
Part #: 11427510717
Price: $8.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
OEM Mahle/Mann Oil Filter - E28 528e, E30 325e/i, E34 525i 89-90 Replacement oil filter kit for the M20 12 valve inline 6 cylinder engine, found in many BMWs from 1985-1991. Same as BMW part number 11421266773.

This oil filter fits the following BMWs:

1985-1991 E30 3 Series 6 cylinder - including 325, 325e, 325es, 325i, 325is & 325ix
1985-1988 E28 5 Series 528e
1989-1990 E34 5 Series 525i
Mahle
Part #: OC49
Price: $5.95 (USD) 
Ships in 2 Days
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
K&P Engineering High Performance Stainless Steel Micronic Oil Filter - M20

Stainless steel filtration is not a new technology but is quickly gaining popularity in the automotive segment. With the ability to filter down as small as a paper filter element with the ability to be washed and reused!

The K&P Engineering filter element is made from medical grade, type 304 stainless steel micronic filter cloth to provide unmatched protection against oil contamination and resultant engine damage. A one inch square of this material flows an incredible 1.9 gallons of oil per minute at only 1 PSI pump pressure. The adhesive used in the filter assembly process is good to 600 degrees Fahrenheit, far above normal engine operating temperatures. A super strength nickel-plated neodymium rare earth magnet is installed in the top of the element for magnetic pre-filtering of the oil. The sophisticated bypass is engineered for proper differential pressures and consistent operation, delivering a greater percentage of filtered oil while being very easy to clean. The twist lock design assures positive filter element placement and allows for easy disassembly, inspection, and cleaning. The quad-ring gasket doubles the seal between the filter and the engine. Finally, the filter housing is carved out of solid 6061T6 billet aluminum, which not only looks trick but aids in dissipating heat.

K&P Engineering manufactures stainless steel filters for a vast array of engines around the world. Staying at the forefront of design and testing allows this company to offer a top-tier product for your European vehicle.

Features:

  • Consistent filtering across entire filter surface
  • Superior ASTMF316 filtration performance
  • 7 times the flow of comparable paper oil filters
  • Magnetic Prefiltering
  • Progressive rate bypass combined with high flow characteristics of the filter media avoids unfiltered oil bypassing the filter during cold startup and high rpm
  • No more cutting apart messy paper filters for trapped debris inspection
  • Proven in Motorsports, Military and Aerospace applications for years. Technology is FAA approved for use in aircraft. 

At regular oil changes, clean to K&P's specifications for continued used - a true lifetime filter.

Watch to learn how to clean a K&P oil filter

 

This product fits the following BMWs:
1975-1983 E21 320i
1982-1991 E30 325i
1982-1988 E28 528i 528e
1989-1995 E34 525i
 

K&P Engineering
Part #: S15
Price: $159.00 (USD) 
In Stock
Free Shipping Free Shipping
Quantity: