Turner E46 M3 TrackSport Rotors

Extended periods of aggressive driving causes the amount of heat in the rotors to build up, & as the temperature of the rotors increase, the metal begins to expand. With solid rotors, this can lead to numerous issues such as warping of the rotors, unexpected cracking along the inner "ring" or friction surfaces, & increased brake fade. Turner's TrackSport rotors feature a full floating two-piece design & slotted grooves to allow smooth, consistent braking force & easy expulsion of gases & dust created by the brake pads & rotors under heavy braking.
Sort By:

Turner TrackSport Brake Kit - Front - E46 M3
Turner TrackSport Brake Kit - Front - E46 M3
For vehicles with Competition Package/ZCP/CSL front brakes
Packaged by Turner - Corporate Logo
T#:637005
Part#: 024120TMSBK1KT
Inventory On Order, ETA Jun 22, 2021
Sale - Save 10% $1,331.04
$1,197.94
Sale - Save 10% $1,331.04
$1,197.94
Looking to make an easy upgrade on your BMW? We suggest upgrading your brakes with this TrackSport Brake Kit! Our TrackSport brake kit features our very own full-floating TrackSport rotors, Pagid Racing RSL 29 brake pads, brand new stainless steel set screws, and a genuine BMW pad wear sensor. The combination of these TrackSport rotors and the RSL 29 brake pads make for an amazing combination that allows for extended track sessions, great brake fade resistance, and overall excellent braking characteristics. After feeling the change in braking performance, you'll feel confident pushing your BMW to its limits, chasing down shorter lap times! These TrackSport rotors feature a full-floating two-piece design and slotted grooves to allow smooth, consistent braking force, and easy expulsion of gases and dust created by the brake pads and rotors under heavy braking. This means that no matter the conditions, you can expect the braking feel to remain consistent, even throughout long periods of abuse. Designed specifically for high-performance applications, these rotors are significantly more resistant to the effects of heat and friction, lessening the negative effects typically seen with standard rotors. The separation of the friction disk and the rotor hat allows for the rotor ring to expand and helps prevent heat from traveling into other sensitive braking components that could be damaged from prolonged exposure to harsh conditions. Directional veins further increase this cooling, preventing additional heat soak and keeping your BMW on the track for longer! The RSL29 pad is an endurance racing compound with long life and great wear characteristics. It has stable friction over a broad temperature range which makes them a very easy to use and predictable braking pad in a lot of environments. An evolution of the RSL19 endurance pad designed for more advanced drivers, this compound combines the outstanding wear rate of the RSL19 with a slightly higher coefficient of friction and initial bite. RSL29 also features improved heat fade resistance over the RSL19. In addition to the endurance racing, this pad will also be found in GT and VLN classes and Touring Cars (including our own E46 World Challenge cars). BMW has been using Pagid Yellow pads on their Nurburgring test vehicles and Ring Taxi for years. Included in this kit: Turner Motorsport TrackSport Rotors - 345x28mm Pagid Racing RSL 29 Brake Pads Stainless Steel Set Screws Genuine BMW Brake Pad Wear Sensor
Show More Show Less
Turner TrackSport Brake Kit - Rear - E46 M3
Packaged by Turner - Corporate Logo
T#:636996
Part#: 024120TMS03ABKKT
Expected Ship Date: Jul 12, 2021
Sale - Save 10% $1,243.00
$1,118.70
Free Shipping on orders $49 and up
Sale - Save 10% $1,243.00
$1,118.70
Free Shipping on orders $49 and up
Looking to make an easy upgrade on your E46 M3? We suggest upgrading your brakes with this TrackSport Brake Kit! Our TrackSport brake kit features our very own semi-floating E46 M3 TrackSport rotors, Pagid Racing RSL 29 brake pads, brand new stainless steel set screws, and a genuine BMW pad wear sensor. The combination of these Tracksport rotors and the RSL 29 brake pads make for an amazing combination that allows for extended track sessions, great brake fade resistance, and overall excellent braking characteristics. After feeling the change in braking performance, you'll feel confident pushing your M3 to its limits, chasing down shorter lap times! These TrackSport rotors feature a semi-floating two-piece design and slotted grooves to allow smooth, consistent braking force, and easy expulsion of gases and dust created by the brake pads and rotors under heavy braking. This means that no matter the conditions, you can expect the braking feel to remain consistent, even throughout long periods of abuse. Designed specifically for high-performance applications, these rotors are significantly more resistant to the effects of heat and friction, lessening the negative effects typically seen with standard rotors. The separation of the friction disk and the rotor hat allows for the rotor ring to expand and helps prevent heat from traveling into other sensitive braking components that could be damaged from prolonged exposure to harsh conditions. Directional veins further increase this cooling, preventing additional heat soak and keeping your BMW on the track for longer! The RSL29 pad is an endurance racing compound with long life and great wear characteristics. It has stable friction over a broad temperature range which makes them a very easy to use and predictable braking pad in a lot of environments. An evolution of the RSL19 endurance pad designed for more advanced drivers. This compound combines the outstanding wear rate of the RSL19 with a slightly higher coefficient of friction and initial bite. RSL29 also features improved hot fade resistance over the RSL19. In addition to the endurance racing, this pad will also be found in GT and VLN classes and Touring Cars (including our own E46 World Challenge cars). BMW has been using Pagid Yellow pads on their Nurburgring test vehicles and Ring Taxi for years. Included in this kit: Turner Motorsport TrackSport Rotors - 328x20mm Pagid Racing RSL 29 Brake Pads Stainless Steel Set Screws Genuine BMW Brake Pad Wear Sensor
Show More Show Less
Turner Motorsport Front TrackSport Rotor Set - 345x28mm - E46 M3
Turner Motorsport Front TrackSport Rotor Set - 345x28mm - E46 M3 ...
For vehicles with Competition Package/ZCP/CSL front brakes
Turner Motorsport - Corporate Logo
T#:600063
Part#: 024120TMS02AKT
In Stock
$969.95
$969.95
When considering a brake rotor upgrade, it's important to factor in their specific use. On the road, a solid rotor is a simple, yet cheap and effective solution that is perfectly capable of handling daily-driver requirements. When you start taking your BMW to the track, things become a little more complicated. Extended periods of aggressive driving causes the amount of heat in the rotors to build up, and as the temperature of the rotors increase, the metal begins to expand. With solid rotors, this can lead to numerous issues such as warping of the rotors, unexpected cracking along the inner "ring" or friction surfaces, and increased brake fade. This is where Two-Piece Floating rotors start to shine. Two-Piece rotors were designed specifically for high-performance applications and are significantly more resistant to the effects of heat and friction, lessening the negative effects typically seen with standard rotors. The separation of the friction disk and the rotor hat allows for the rotor ring to expand and helps prevent heat from traveling into other sensitive braking components that could be damaged from prolonged exposure to harsh conditions. Needless to say, we aren't a fan of our track days being cut short due to braking issues, so we decided to create our very own performance-oriented TrackSport Rotors! Our TrackSport rotors feature a full floating two-piece design and slotted grooves to allow smooth, consistent braking force and easy expulsion of gases and dust created by the brake pads and rotors under heavy braking. This means that no matter the conditions, you can expect the braking feel to remain consistent, even throughout long periods of abuse. Additionally, thanks to these rotor's inherent two-piece design and the included Aluminum rotor hats, these remove almost 20% of the rotational mass versus stock rotors. Features & Specifications: OE Fitment and Installation Two-Piece Fully Floating Design Heat-treated rotor rings for extended life and reduced wear Factory-applied coating prevents rust and corrosion Lightweight design eliminates excess rotational mass Slotted grooves expel brake dust and gases Internal vanes increase cooling and braking performance
Show More Show Less

Turner Motorsport Rear TrackSport Rotor Set - 328x20mm - E46 M3, E39 M5
Turner Motorsport - Corporate Logo
T#:600231
Part#: 024120TMS03AKT
Expected Ship Date: Jul 12, 2021
$947.90
Free Shipping on orders $49 and up
When considering a brake rotor upgrade, it's important to factor in their specific use. On the road, a solid rotor is a simple, yet cheap and effective solution that is perfectly capable of handling daily-driver requirements. When you start taking your BMW to the track, things become a little more complicated. Extended periods of aggressive driving causes the amount of heat in the rotors to build up, and as the temperature of the rotors increase, the metal begins to expand. With solid rotors, this can lead to numerous issues such as warping of the rotors, unexpected cracking along the inner "ring" or friction surfaces, and increased brake fade. This is where Two-Piece Floating rotors start to shine. Two-Piece rotors were designed specifically for high-performance applications and are significantly more resistant to the effects of heat and friction, lessening the negative effects typically seen with standard rotors. The separation of the friction disk and the rotor hat allows for the rotor ring to expand and helps prevent heat from traveling into other sensitive braking components that could be damaged from prolonged exposure to harsh conditions. Needless to say, we aren't a fan of our track days being cut short due to braking issues, so we decided to create our very own performance-oriented TrackSport Rotors! These TrackSport rotors feature a semi-floating two-piece design and slotted grooves to allow smooth, consistent braking force and easy expulsion of gases and dust created by the brake pads and rotors under heavy braking. This means that no matter the conditions, you can expect the braking feel to remain consistent, even throughout long periods of abuse. Additionally, thanks to these rotor's inherent two-piece design and the included Aluminum rotor hats, these remove almost 20% of the rotational mass versus stock rotors. Features & Specifications: OE Fitment and Installation Two-Piece Semi-Floating Design Heat-treated rotor rings for extended life and reduced wear Factory-applied coating prevents rust and corrosion Lightweight design eliminates excess rotational mass Slotted grooves expel brake dust and gases Internal vanes increase cooling and braking performance
Show More Show Less