Water Pump and Thermostat Package - N51/N52 Engine - E82 128i, E9X 325i/328i/330i, E60 528i

This packages covers the major components you would install along with a new water pump or thermostat. On the N51/N52 cars (128i, 325i 328i, 330i, 525i, 528i, 530i) the water pump and theremostat are mounted together. In fact, to get to the thermostat, BMW expects you to remove the water pump. This package covers the whole job. With the electric water pump now an integral part of the efficiency and performance of the engine, staying on top of its maintenance and replacement is the smart thing to do.

Our water pump/thermostat overhaul includes:
  • OEM electric water pump, p/n 11517586925.
  • aluminum mounting screws for water pump (set of 3), p/n 11510392553
  • OEM Behr thermostat, p/n 11537549476
  • Original BMW connecting hose from thermostat to water pump, p/n 11537521049
  • OEM-style hose clamps for hose (x 2)

  • BUY AS A PACKAGE AND SAVE $$!

    The water pump on the N52 engine has more cooling responsibilities than ever before. Not only must it provide cooling for the engine, but it's also pumping fluid used to cool the automatic transmission oil. The good news is that the pump only works when, and only as much, as it needs to. The engine computer dictates how much fluid needs to be pumped through the system depending on the load. That means the system can actually stop the pump when warmer temperatures are needed. No longer is the pump spinning all the time from an engine-driven belt. The bad news is that it's now an electrical part, so a failure is usually immediate and with no warning. And if the electronics are at fault, there is no way to rebuild or repair it. Fortunately, the engine computer will force a shut down or reduce power if a problem occurs, preventing catastrophic engine damage.

    How to avoid a water pump failure in the future? Replacing the water pump as part of a regular interval schedule will ensure you always have a functioning pump in place. Since this technology is relatively new for BMW, therefore the lifecycle of the pump isn't yet known, we have been recommending replacement every 80-100k miles. This package of OE/OEM parts covers everything with Original BMW coolant offered to finish off the job. A proper bleeding procedure must be followed with the new electric pump.

    This water pump package fits the following BMWs with the N51/N52 engine:
    2008-2013 E82 BMW 128i
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
    2007-2013 E93 BMW 328i - Convertible
    2006-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive
    2006-2010 E83 BMW X3 3.0i X3 3.0si
    2006-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si
    2009+ Z4 BMW Z4 sDrive30i
    2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
    Packaged by Turner
    T#: 340364 | Part#: TMS206099
    Starting at $424.64
    424.64 $424.64
    Qty
    Free Shipping
    In Stock

    Select Options

    No, Do Not Include Coolant At This Time.
    T#340364 - TMS206099 - Water Pump and Thermostat Package - N51/N52 Engine - E82 128i, E9X 325i/328i/330i, E60 528i - This packages covers the major components you would install along with a new water pump or thermostat. On the N51/N52 cars (128i, 325i 328i, 330i, 525i, 528i, 530i) the water pump and theremostat are mounted together. In fact, to get to the thermostat, BMW expects you to remove the water pump. This package covers the whole job. With the electric water pump now an integral part of the efficiency and performance of the engine, staying on top of its maintenance and replacement is the smart thing to do.Our water pump/thermostat overhaul includes:OEM electric water pump, p/n 11517586925.aluminum mounting screws for water pump (set of 3), p/n 11510392553OEM Behr thermostat, p/n 11537549476Original BMW connecting hose from thermostat to water pump, p/n 11537521049OEM-style hose clamps for hose (x 2)BUY AS A PACKAGE AND SAVE $$!The water pump on the N52 engine has more cooling responsibilities than ever before. Not only must it provide cooling for the engine, but it's also pumping fluid used to cool the automatic transmission oil. The good news is that the pump only works when, and only as much, as it needs to. The engine computer dictates how much fluid needs to be pumped through the system depending on the load. That means the system can actually stop the pump when warmer temperatures are needed. No longer is the pump spinning all the time from an engine-driven belt. The bad news is that it's now an electrical part, so a failure is usually immediate and with no warning. And if the electronics are at fault, there is no way to rebuild or repair it. Fortunately, the engine computer will force a shut down or reduce power if a problem occurs, preventing catastrophic engine damage.How to avoid a water pump failure in the future? Replacing the water pump as part of a regular interval schedule will ensure you always have a functioning pump in place. Since this technology is relatively new for BMW, therefore the lifecycle of the pump isn't yet known, we have been recommending replacement every 80-100k miles. This package of OE/OEM parts covers everything with Original BMW coolant offered to finish off the job. A proper bleeding procedure must be followed with the new electric pump.This water pump package fits the following BMWs with the N51/N52 engine:2008-2013  E82 BMW 128i2006-2011  E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan2006-2012  E91 BMW 325xi 328i 328xi 328i xDrive - Wagon2007-2013  E92 BMW 328i 328xi 328i xDrive - Coupe2007-2013  E93 BMW 328i - Convertible2006-2010  E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 2006-2010  E83 BMW X3 3.0i X3 3.0si2006-2008  E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si 2009+  Z4 BMW Z4 sDrive30i 2009+  Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is - Packaged by Turner - BMW
    Yes, Include One Gallon Of BMW Coolant (82141467704)
    Genuine BMW - Corporate Logo
    T#: 1474
    |
    Part#: 82141467704
    In Stock
    Sale - Save 19% $24.50
    $19.89
    Qty: 1
    T#340364 - TMS206099 - Water Pump and Thermostat Package - N51/N52 Engine - E82 128i, E9X 325i/328i/330i, E60 528i - This packages covers the major components you would install along with a new water pump or thermostat. On the N51/N52 cars (128i, 325i 328i, 330i, 525i, 528i, 530i) the water pump and theremostat are mounted together. In fact, to get to the thermostat, BMW expects you to remove the water pump. This package covers the whole job. With the electric water pump now an integral part of the efficiency and performance of the engine, staying on top of its maintenance and replacement is the smart thing to do.Our water pump/thermostat overhaul includes:OEM electric water pump, p/n 11517586925.aluminum mounting screws for water pump (set of 3), p/n 11510392553OEM Behr thermostat, p/n 11537549476Original BMW connecting hose from thermostat to water pump, p/n 11537521049OEM-style hose clamps for hose (x 2)BUY AS A PACKAGE AND SAVE $$!The water pump on the N52 engine has more cooling responsibilities than ever before. Not only must it provide cooling for the engine, but it's also pumping fluid used to cool the automatic transmission oil. The good news is that the pump only works when, and only as much, as it needs to. The engine computer dictates how much fluid needs to be pumped through the system depending on the load. That means the system can actually stop the pump when warmer temperatures are needed. No longer is the pump spinning all the time from an engine-driven belt. The bad news is that it's now an electrical part, so a failure is usually immediate and with no warning. And if the electronics are at fault, there is no way to rebuild or repair it. Fortunately, the engine computer will force a shut down or reduce power if a problem occurs, preventing catastrophic engine damage.How to avoid a water pump failure in the future? Replacing the water pump as part of a regular interval schedule will ensure you always have a functioning pump in place. Since this technology is relatively new for BMW, therefore the lifecycle of the pump isn't yet known, we have been recommending replacement every 80-100k miles. This package of OE/OEM parts covers everything with Original BMW coolant offered to finish off the job. A proper bleeding procedure must be followed with the new electric pump.This water pump package fits the following BMWs with the N51/N52 engine:2008-2013  E82 BMW 128i2006-2011  E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan2006-2012  E91 BMW 325xi 328i 328xi 328i xDrive - Wagon2007-2013  E92 BMW 328i 328xi 328i xDrive - Coupe2007-2013  E93 BMW 328i - Convertible2006-2010  E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 2006-2010  E83 BMW X3 3.0i X3 3.0si2006-2008  E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si 2009+  Z4 BMW Z4 sDrive30i 2009+  Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is - Packaged by Turner - BMW
    Water Pump And Thermostat Package - N52 Base Kit
    Packaged by Turner - Corporate Logo
    T#: 206099
    |
    Part#: TMS206099
    In Stock
    $424.64
    Qty: 1
    Water Pump and Thermostat Package - N51/N52 Engine - E82 128i, E9X 325i/328i/330i, E60 528i
    $424.64