RaceQuip 5 Point Latch And Link 3" Racing Harness - SFI 16.1 Approved

Racing harnesses are required at any respectable track or strip, but they tend to run upwards of hundreds of dollars. RaceQuip designs and builds safety equipment for just this issue! Since 1975, RaceQuip has been building some of the highest quality racing safety gear on the market. Their high quality and low cost safety gear is the result of wanting to provide "The Best Value in Safety", that keeps drivers safe without draining their wallet.

This Standard 5 Point Latch and Link Racing harness is RaceQuips most popular racing harness, priced at $74.99 or below while still being fully SFI 16.1 Approved.

All harness systems are constructed using drop-forged steel hardware for ultimate strength and reduced weight. All hardware is cadmium plated for added protection. They use only 3" premium polyester webbing and all belts are box-x pattern sewn to ensure uniform stitch length and strength. Belts and hardware are routinely tested to verify compliance with SFI 16.1 standards.

All of their  harness sets feature a latch & link system to retain the belts. The latch & link system is distinguished by a pivoting "hammer," called a Duckbill, which locks all of the belts into place by snapping down into a detent. Both shoulder belts and the sub belt are hooked over the link; the link is inserted into the latch; the Duckbill is then brought down into and over the link, securely holding all of the pieces in place.

RaceQuip Latch & Link Harness Systems come as a "pull down" design. This means that the lap belts must be pulled down and away from the center latch mechanism to tighten.  Since their belts are "double adjustable", lengths are easily adjusted on either end for ease of installation. Using the included three bar slide you can mount the belts by either wrapping them around a rollbar or by bolting them in place. Snap-in ends and eyebolts are sold separately if you want to install your belts in that manner.

Features and Specifications:

  • Exceeds SFI 16.1 Rating (SFI Tags Affixed)
  • NOT D.O.T. / FMVSS Certified for On Highway Use
  • Premium 3" Polyester Webbing
  • Twin Individual Shoulder Belts
  • Pull Down Style Lap Belt
  • 5 Point Design - Single 2" Crotch Sub Strap
  • 3" Hardware Ends Installed 
  • Double Adjustable for Ease of Installation
  • Wrap Around or Bolt-in Mounting
  • Drop-Forged Steel Hardware (no bolts)
  • Shoulders Adjust from 20" to 62"
  • Lap Belt Adjusts 20" to 60"
  • Available in Black, Red, Blue, Yellow, Orange, Purple, Platinum, Green and Pink
  • Can Be Re-webbed (SFI) Upon Expiration
Racequip
T#: 403220 | Part#: 7110XX5PT
Starting at $69.95
69.95 $69.95
Qty
In Stock

Select Options

T#403220 - 7110XX5PT - RaceQuip 5 Point Latch And Link 3" Racing Harness - SFI 16.1 Approved - Racing harnesses are required at any respectable track or strip, but they tend to run upwards of hundreds of dollars. RaceQuip designs and builds safety equipment for just this issue! Since 1975, RaceQuip has been building some of the highest quality racing safety gear on the market. Their high quality and low cost safety gear is the result of wanting to provide "The Best Value in Safety", that keepsdrivers safe without draining their wallet.This Standard 5 Point Latch and Link Racing harness is RaceQuips most popular racing harness, priced at $74.99 or below while still being fully SFI 16.1 Approved.All harness systems are constructed using drop-forged steel hardware for ultimate strength and reduced weight. All hardware is cadmium plated for added protection. They use only 3" premiumpolyester webbing and all belts are box-x pattern sewn to ensure uniform stitch length and strength. Belts and hardware are routinely tested to verify compliance with SFI 16.1 standards.All of their harness sets feature a latch & link system to retain the belts. The latch & link system is distinguished by a pivoting "hammer," called a Duckbill, which locks all of the belts into place by snapping down into a detent. Both shoulder belts and the sub belt are hooked over the link; the link is inserted into the latch; the Duckbill is then brought down into and over the link, securely holding all of the pieces in place.RaceQuip Latch & Link Harness Systems come as a "pull down" design. This means that the lap belts must be pulled down and away from the center latch mechanism to tighten.Since their belts are "double adjustable", lengths are easily adjusted on either end for ease of installation. Using the included three bar slide you can mount the belts by either wrapping them around a rollbar or by bolting them in place. Snap-in ends and eyebolts are sold separately if you want to install your belts in that manner.Features and Specifications:Exceeds SFI 16.1 Rating (SFI Tags Affixed)NOT D.O.T. / FMVSS Certified for On Highway UsePremium 3"Polyester WebbingTwin Individual Shoulder BeltsPull Down Style Lap Belt5 Point Design - Single 2" Crotch Sub Strap3" Hardware Ends InstalledDouble Adjustable for Ease of InstallationWrap Around or Bolt-in MountingDrop-Forged Steel Hardware (no bolts)Shoulders Adjust from 20" to 62"Lap Belt Adjusts 20" to 60"Available in Black, Red, Blue, Yellow, Orange, Purple, Platinum, Green and PinkCan Be Re-webbed (SFI) Upon Expiration - Racequip - BMW MINI
Black
Racequip - Corporate Logo
T#: 403211
|
Part#: 711001
In Stock
$69.95
Qty: 1
Red
Racequip - Corporate Logo
T#: 403212
|
Part#: 711011
Direct Ship
$78.95
Qty: 1
Blue
Racequip - Corporate Logo
T#: 403213
|
Part#: 711021
Direct Ship
$74.95
Qty: 1
Yellow
Racequip - Corporate Logo
T#: 403214
|
Part#: 711031
Direct Ship
$74.95
Qty: 1
Orange
Racequip - Corporate Logo
T#: 403215
|
Part#: 711041
Direct Ship
$74.95
Qty: 1
Purple
Racequip - Corporate Logo
T#: 403216
|
Part#: 711051
Direct Ship
$74.95
Qty: 1
Platinum
Racequip - Corporate Logo
T#: 403217
|
Part#: 711061
Direct Ship
$74.95
Qty: 1
T#403220 - 7110XX5PT - RaceQuip 5 Point Latch And Link 3" Racing Harness - SFI 16.1 Approved - Racing harnesses are required at any respectable track or strip, but they tend to run upwards of hundreds of dollars. RaceQuip designs and builds safety equipment for just this issue! Since 1975, RaceQuip has been building some of the highest quality racing safety gear on the market. Their high quality and low cost safety gear is the result of wanting to provide "The Best Value in Safety", that keepsdrivers safe without draining their wallet.This Standard 5 Point Latch and Link Racing harness is RaceQuips most popular racing harness, priced at $74.99 or below while still being fully SFI 16.1 Approved.All harness systems are constructed using drop-forged steel hardware for ultimate strength and reduced weight. All hardware is cadmium plated for added protection. They use only 3" premiumpolyester webbing and all belts are box-x pattern sewn to ensure uniform stitch length and strength. Belts and hardware are routinely tested to verify compliance with SFI 16.1 standards.All of their harness sets feature a latch & link system to retain the belts. The latch & link system is distinguished by a pivoting "hammer," called a Duckbill, which locks all of the belts into place by snapping down into a detent. Both shoulder belts and the sub belt are hooked over the link; the link is inserted into the latch; the Duckbill is then brought down into and over the link, securely holding all of the pieces in place.RaceQuip Latch & Link Harness Systems come as a "pull down" design. This means that the lap belts must be pulled down and away from the center latch mechanism to tighten.Since their belts are "double adjustable", lengths are easily adjusted on either end for ease of installation. Using the included three bar slide you can mount the belts by either wrapping them around a rollbar or by bolting them in place. Snap-in ends and eyebolts are sold separately if you want to install your belts in that manner.Features and Specifications:Exceeds SFI 16.1 Rating (SFI Tags Affixed)NOT D.O.T. / FMVSS Certified for On Highway UsePremium 3"Polyester WebbingTwin Individual Shoulder BeltsPull Down Style Lap Belt5 Point Design - Single 2" Crotch Sub Strap3" Hardware Ends InstalledDouble Adjustable for Ease of InstallationWrap Around or Bolt-in MountingDrop-Forged Steel Hardware (no bolts)Shoulders Adjust from 20" to 62"Lap Belt Adjusts 20" to 60"Available in Black, Red, Blue, Yellow, Orange, Purple, Platinum, Green and PinkCan Be Re-webbed (SFI) Upon Expiration - Racequip - BMW MINI
Green
Racequip - Corporate Logo
T#: 403218
|
Part#: 711071
Direct Ship
$74.95
Qty: 1
Pink
Racequip - Corporate Logo
T#: 403219
|
Part#: 711081
Direct Ship
$74.95
Qty: 1
RaceQuip 5 Point Latch And Link 3" Racing Harness - SFI 16.1 Approved
$69.95