Contact YouTube Blog Twitter facebook
1-800-280-6966
Login   |

0 item(s) in your Shopping Cart
Language:
Currency:
VAT Mode:
  Current BMWBMW E31  BMW 8 Series   Clear BMW chassis  

BMW E31 Brakes 

Brake Rotors - Cross-Drilled
Cross-Drilled Brake Rotors - Front - E39 540i (up to 3/00), E38 740i/il, E31 (pair)   (more info)
Direct replacement FRONT cross-drilled brake discs for the E39 540i, incl Touring (up to 3/00), E38 740 -12/00, 850 -8/93, 850CSi These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

This item fits the following BMWs:
1997-3/2000 E39 BMW 540i sedan & wagon
1995-2001 E38 BMW 740i 740il
1990-1993 E31 BMW 850i 850ci 850csi
Part #: 34111159895CD
Price: $162.60 (USD) 
 
Quantity:   

Cross-Drilled Brake Rotors - Rear - E38 740i/il, E31 840i/ci, 850i/ci/csi   (more info)
Direct replacement REAR cross-drilled brake discs for the E38 740I/IL, E31 840i/ci, 850i/Ci/Csi. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

This item fits the following BMWs:
1995-2001 E38 BMW 740i 740il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
Part #: 34216757748CD
Price: $179.90 (USD) 
 
Quantity:   

Brake Rotors - Cross-Drilled & Slotted
Cross-Drilled & Slotted Brake Rotors - Front - E39 540i (up to 3/00), E38 740i/il, E31 (pair)   (more info)
Slotting a rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The slots in our rotors allow the gases to escape giving better braking performance. Cross-drilling a rotor is a way to improve initial pad bite. With the additional leading edges at each hole, the pad is able to grab the rotor just a little bit harder.

By combining both Cross-drilling and slotting, these rotors combine the best of both worlds. Fewer holes mean longer pad life with little penalty in the way of initial pad bite.

These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

This item fits the following BMWs:
1997-3/2000 E39 BMW 540i sedan & wagon
1995-2001 E38 BMW 740i 740il
1990-1993 E31 BMW 850i 850ci 850csi
Part #: 34111159895CDS
Price: $209.90 (USD) 
 
Quantity:   

Brake Caliper Rebuild Kits
Brake Bleeder Screw - E30 E36 E34 E32 E38 E31 Z3   (more info)
This brake bleeder screw fits many BMWs. These screws often seize and become damaged while attempting to bleed the brakes.

This item fits the following BMWs:
FRONT BRAKES
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1989-1995 E34 BMW 525i 530i 535i 540i M5
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.8 M Roadster M Roadster
2000-2003 E52 BMW Z8

REAR BRAKES
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325IX M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1989-1995 E34 BMW 525i 530i 535i 540i M5
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Roadster
2000-2003 E52 BMW Z8

Part #: 34111153197 (34-11-1-153-197)
Price: $8.95 (USD) 
 
Quantity:   

Brake Calipers
Brake Caliper - Rebuilt - Front Left - E31 850ci 1990-1993, 850csi   (more info)
Our rebuilt calipers start off with an original BMW caliper that is fully disassembled thoroughly inspected and carefully processed. All threads are chased, all groves are meticulously cleaned and checked. Pistons are replaced if any dents or scratches are found. All rubber components and hardware are replaced with new OE quality parts. The units are then air pressure tested and submitted to a thorough final inspection.

This item fits the following BMWs:
1990-1993 E31 BMW 850i 850ci
1992-1996 E31 BMW 850csi
Part #: 34111160325R
Price: $56.95 (USD) 
 
More Information

Brake Caliper - Rebuilt - Front Right - E31 850ci 1990-1993, 850csi   (more info)
Our rebuilt calipers start off with an original BMW caliper that is fully disassembled thoroughly inspected and carefully processed. All threads are chased, all groves are meticulously cleaned and checked. Pistons are replaced if any dents or scratches are found. All rubber components and hardware are replaced with new OE quality parts. The units are then air pressure tested and submitted to a thorough final inspection.

This item fits the following BMWs:
1990-1993 E31 BMW 850i 850ci
1992-1996 E31 BMW 850csi
Part #: 34111160326R
Price: $56.95 (USD) 
 
More Information

Brake Caliper - Rebuilt - Rear Left - E31 840i/ci 850i/ci/csi   (more info)
Our rebuilt calipers start off with an original BMW caliper that is fully disassembled thoroughly inspected and carefully processed. All threads are chased, all groves are meticulously cleaned and checked. Pistons are replaced if any dents or scratches are found. All rubber components and hardware are replaced with new OE quality parts. The units are then air pressure tested and submitted to a thorough final inspection.

This item fits the following BMWs:
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
Part #: 34211160329R
Price: $54.95 (USD) 
 
More Information

Brake Caliper - Rebuilt - Rear Right - E31 840i/ci 850i/ci/csi   (more info)
Our rebuilt calipers start off with an original BMW caliper that is fully disassembled thoroughly inspected and carefully processed. All threads are chased, all groves are meticulously cleaned and checked. Pistons are replaced if any dents or scratches are found. All rubber components and hardware are replaced with new OE quality parts. The units are then air pressure tested and submitted to a thorough final inspection.

This item fits the following BMWs:
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
Part #: 34211160330R
Price: $54.95 (USD) 
 
More Information

Caliper Bushing Upgrade Kit   (more info)
This kit will eliminate caliper twisting caused by rubber guide pin bushings. This kit, consisting of precision guide pins and machined brass guide bushings will allow your calipers to squeeze evenly on both sides of the brake rotor, just like expensive multi-piston big brake kits. This will result in much longer pad life and more consistent brake system feel. These are a must if you race your BMW. This kit is SCCA and BMW CCA Club Racing approved. This kit fits both the front or rear calipers (but sold per axle). The ideal set-up is to run both front and rear on your car. Installation is quite simple. Does not fit E30 318/325 with Girling calipers nor E24 M6/E28 M5.
Part #: CBMW1
Price: $59.95 (USD) 
 
Quantity:   

Brake Ducts & Backing Plates
Brake Duct Hose Kit - 3 inch with clamps   (more info)
If you are adding fully functional brake ducts to your track or race car, this hose kit is a must. It includes two 4 foot lengths of high-temp duct hose and 4 appropriate sized hose clamps. This is the same duct hose we use in our reknowned racing brake duct kits & our championship winning BMW race cars. This is the best suited and highest quality hose for the job. We wouldn't use anything less -- would you?
Part #: TBR9962303
Price: $89.95 (USD) 
 
Quantity:   

Brake Fluid
Ate Plastilube Brake Anti Squeal Compound - 35ml Tube   (more info)
Made by OEM brake manufacturer, Ate, this high temp lubricant is used for brake system contact areas such as caliper guide pins, caliper bracket contact points and brake pad backing plates keep the parts lubricated and to reduce brake noise / squealing. Comes in a 35ml Tube.
Part #: 555573012
Price: $5.99 (USD) 
 
Quantity:   

ATE Super Blue Brake Fluid (1 liter)   (more info)
This high performance Brake Fluid is ideal for coping with the extreme demands posed by motor racing, autocross, or high performance driving. The overall high dry and wet boiling points make this fluid an excellent choice for street driven vehicles, too, where brake fluid is flushed less frequently than that in race-driven vehicles.

The ATE Super Blue fluid exceeds all DOT 4 requirements, with a dry boiling point or 536 degrees F and a wet boiling point 396 degrees F. This fluid is NOT SILICONE and is compatible with conventional brake fluid. It also available in amber color (known as ATE TYP 200, which we also carry) to help when flushing the complete system. Tip: Rotating between amber and blue every other brake flush, allows you to flush until you see a distinct color change -- convserving fluid and, most importantly, assuring a full and proper flushing of the old brake fluid.

Color: Blue
Part #: ATESB
Regular Price: $13.50 (USD)
 Sale Price: $12.15 (USD) 
 
Quantity:   

Ate Type 200 Racing Brake Fluid (1 liter)   (more info)
This high performance Brake Fluid is ideal for coping with the extreme demands posed by motor racing, autocross, or high performance driving. The overall high dry and wet boiling points make this fluid an excellent choice for street driven vehicles, too, where brake fluid is flushed less frequently than that in race-driven vehicles.

The ATE Type 200 fluid exceeds all DOT 4 requirements, with a dry boiling point or 536 degrees F and a wet boiling point 396 degrees F. This fluid is NOT SILICONE and is compatible with conventional brake fluid. It also available in blue tinted color (known as ATE Super Blue, which we also carry) to help when flushing the complete system. Tip: Rotating between amber and blue every other brake flush, allows you to flush until you see a distinct color change -- convserving fluid and, most importantly, assuring a full and proper flushing of the old brake fluid.

Color: Amber (gold)
Part #: ATE200
Regular Price: $13.50 (USD)
 Sale Price: $12.15 (USD) 
 
Quantity:   

Castrol SRF Racing Brake Fluid (Liter Bottle)   (more info)
Castrol SRF Racing Brake Fluid is an ultra high performance product formulated specifically to satisfy the ever increasing stresses placed upon the braking systems used in international motorsport. The exceptional performance of Castrol SRF is due to a novel silicon ester technology pioneered by Castrol and unique to the extent that it has been granted patent-protection in numerous countries throughout the world.

Brake Fluid Data Sheet

Part #: SRF
Price: $74.95 (USD) 
 
Quantity:   

Motive Power Brake Bleeder Tool (Fits most European Cars)   (more info)
The best way how to bleed the brakes on a BMW for the do it yourself BMW owner!

The Motive Products POWER BLEEDER is the number 1 selling DIY pressure brake bleeder. It operates just like the professional mechanics' tool at a fraction of the price. The bleeder works by attaching to your brake fluid resevoir and pressurzing your brake system as well as supplying more fluid as needed. It essentially simulate the old fashioned "2 man" brake bleeding technique, only without the need for a second person. Not sure how easy it is? Watch the video to the right and see how simple it is!
Video: How To Bleed BMW Brakes


The Motive Brake Bleeder works on most European cars, including Alfa Romeo, Audi, BMW, Fiat, Mercedes, Peugeot, Porsche, Renault, SAAB, Volkswagen, Volvo, and all other cars with 45mm threaded hydraulic fluid reservoir caps All bleeders come with a full 1 year warranty. 2 Quart Capacity. Don't be fooled by cheap imitations!

Choose from either the standard bleeder or premium Black Label Bleeder.
Standard Bleeder - has a plastic reservoir cap and non-swivel fitting.
Black Label Bleeder - comes with custom machined aluminum cap and deluxe swivel fitting, an extra length of high grade polyurethane tubing that won't cloud or crack with exposure to brake fluid.

This brake bleeder fits the following automobiles:
BMW, Audi, Alfa Romeo, Fiat, Mercedes Benz, Peugeot, Porsche, Renault, Saab, Volkswagon, & Volvo.
Part #: MOT-0100x
Price: $49.95 (USD) 
 
More Information

Motul DOT 5.1 Brake Fluid - 1/2 liter   (more info)
10% Off this month for your BMWLong life 100% synthetic fluid for hydraulic actuated-brake and clutch systems (Non-Silicone). Compatible with DOT3 DOT4 or DOT 5.1. The high wet boiling point (185°C / 365°F), superior to DOT 4 (155°C / 311°F mini) and DOT 3 (140°C / 284°F mini) fluids enables to use this product longer. Indeed, DOT 3 / DOT 4 and DOT 5.1 brake fluids have the property to absorb humidity contained in the air, which reduces their boiling points and consequently security. The wet boiling point is representative of the fluid after one year of use.
Part #: DOT 5.1
Regular Price: $9.10 (USD)
 Sale Price: $8.19 (USD) 
 
Quantity:   

MOTUL RBF 600 Racing Brake Fluid (DOT4) - 500ml Bottle   (more info)
10% Off this month for your BMWMOTUL RBF 600 is full 100% synthetic brake fluid specifically designed to resist the high temperatures of racing brake pads and clutch system. MOTUL RBF 600 far exceeds the standards of DOT3 and DOT4, with extremely high dry and wet boiling points to prevent vapor lock and brake fade.

EXTREME THERMAL RESISTANCE AND STABILITY: The extremely high dry boiling point of RBF 600 (312°c / 593°F) enables effective braking under even the most extreme conditions of racing and competition.

HIGH EFFICIENCY WHEN RAINY: The very high wet boiling point (216°c / 420°F) is superior to conventional brake fluids and provides a particularly efficient braking system in rainy conditions, resisting vapor lock.

We use MOTUL in our own Championship Winning Turner Motorsport BMW race cars. Shouldn't you?
Part #: RBF600
Regular Price: $16.95 (USD)
 Sale Price: $15.26 (USD) 
 
Quantity:   

MOTUL RBF 660 Racing Brake Fluid (DOT4) - 500ml Bottle   (more info)
10% Off this month for your BMWMOTUL RBF 660 is full 100% synthetic brake fluid specifically designed to resist the high temperatures of racing brake pads and clutch system. MOTUL RBF 660 far exceeds the standards of DOT3, DOT4, and DOT 5.1 with extremely high dry and wet boiling points to prevent vapor lock and brake fade.

EXTREME THERMAL RESISTANCE AND STABILITY: The extremely high dry boiling point of RBF 660 (325°c / 617°F) enables effective braking under even the most extreme conditions of racing and competition.

HIGH EFFICIENCY WHEN RAINY: The very high wet boiling point (204°c / 400°F) is superior to conventional brake fluids and provides a particularly efficient braking system in rainy conditions, resisting vapor lock.

We use MOTUL in our own Championship Winning Turner Motorsport BMW race cars. Shouldn't you?
Part #: RBF660
Regular Price: $30.80 (USD)
 Sale Price: $27.72 (USD) 
 
Quantity:   

Turner Motorsport Brake Bleeder Bottle   (more info)
The Turner Motorsport Brake Bleeder Bottle is the perfect companion when bleeding your brakes! The bottle features a nice long flexible hose so fitment over the bleeder nipple is a snap. These bottles also offer either a magnetic mount or a cable lanyard, so you can hang the bottle or stick it to the brake rotor, this leaves your hands-free to work with your tools. It works great with our Power Brake Bleeder
Part #: BBM/BBL
Price: $16.49 (USD) 
 
More Information

Brake Pad Wear Sensors & ABS Sensors
Brake Pad Sensor Wire - E24 E28 E32 E34 E31 (see app list)   (more info)
We recommend replacing the brake sensor wire each time the brake pads are replaced. These often become brittle and will disintegrate while removing them from the old pads. This sensor fits both the FRONT and REAR on BMW E32 E34. It fits the FRONT on E28 M5 and E24 M6 and REAR on E31 850ci.

This item fits the following BMWs:
1989-1995 E34 BMW 525i 530i 535i 540i M5 - FRONT/REAR
1988-1994 E32 BMW 735i 735il 740i 740il 750il -FRONT/REAR
1988 E28 BMW M5 - FRONT ONLY
1987-1989 E24 BMW M6 - FRONT ONLY
1990-1991 E31 BMW 850i - REAR ONLY
Part #: 34351180781 (34-35-1-180-781)
Price: $9.95 (USD) 
 
Quantity:   

Brake Pad Sensor Wire - E31 840i/ci 850i/ci/csi - Front   (more info)
We recommend replacing the brake sensor wire each time the brake pads are replaced. These often become brittle and will disintegrate while removing them from the old pads.

This item fits the following BMWs:
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
Part #: 34351181823 (34-35-1-181-823)
Price: $12.95 (USD) 
 
Quantity:   

Brake Pads - Axxis / PBR Metal Master Street Pads
Axxis/PBR Metal Master Brake Pads - Front - E39 530i/540i/M5 1997-2003, E38 740i & X5 3.0/4.4 (2000-2003)   (more info)
FRONT Axxis/PBR Metal Master brake pads for the following BMWs:
1991-1997 E31 8-series: 850i, 850Ci, 850CSi
1995-2001 E38 7-series: 740i, 740iS, 740iL
1998-2003 E39 5-series: 530i, 540i sedan, 540iT wagon, M5
1999-2006 E53 X5 SAV: X5 3.0i, X5 4.4i
Part #: D1409M
Price: $85.95 (USD) 
 
Quantity:   

Axxis/PBR Metal Master Brake Pads - Rear - E46 330/M3, E39 M5, E38 all, E53 X5 all, E83 X3 all, E9X 330, Z4 M, Z8 (set)   (more info)
REAR Brake Pad Applications:
2001-2006 E46 3-series 330i, 330Ci, 330Xi sedan, coupe, convertible
2001-2006 E46 3-series M3 coupe, convertible
1999-2004 E39 5-series M5 sedan
1995-2001 E38 7-series 740i, 740iS, 740iL
1991-1997 E31 8-series 840i, 840Ci, 850i, 850Ci, 850CSi coupe
2004-2010 E83 X3 SAV X3 2.5, X3 2.5i, X3 3.0i, X3 3.0Si
1999-2006 E53 X5 SAV X5 3.0, X5 4.4, X5 4.6is, X5 4.8is
2007-2008 E85/E86 Z4 M Roadster, M Coupe
2000-2003 E52 Z8 Roadster
Part #: D1397M
Price: $44.95 (USD) 
 
Quantity:   

Brake Pads - Axxis / PBR Ultimate Street Pads
Axxis Ultimate Brake Pads - Front - E39 530i/540i/M5 1997-2003, E38 740i & X5 3.0/4.4 (2000-2003)   (more info)
FRONT Axxis Ultimate Brake Pads for the following BMWs:
1991-1997 E31 8-series: 850i, 850Ci, 850CSi
1995-2001 E38 7-series: 740i, 740iS, 740iL
2001-2003 E39 5-series: 530i, 540i sedan, 540iT wagon, M5
1999-2006 E53 X5 SAV: X5 3.0i, X5 4.4i
Part #: A1409/D1409C
Price: $79.95 (USD) 
 
Quantity:   

Axxis Ultimate Brake Pads - Rear - E46 330/M3, E39 M5, E38, E53 X5, E83 X3, Z4 M, Z8   (more info)
REAR Brake Pad Applications:
2001-2006 E46 3-series 330i, 330Ci, 330Xi sedan, coupe, convertible
2001-2006 E46 3-series M3 coupe, convertible
1999-2004 E39 5-series M5 sedan
2009-2010 E60 BMW 528i 528xi 528i xDrive
1995-2001 E38 7-series 740i, 740iS, 740iL
1991-1997 E31 8-series 840i, 840Ci, 850i, 850Ci, 850CSi coupe
2004-2010 E83 X3 SAV X3 2.5, X3 2.5i, X3 3.0i, X3 3.0Si
1999-2006 E53 X5 SAV X5 3.0, X5 4.4, X5 4.6is, X5 4.8is
2007-2008 E85/E86 Z4 M Roadster, M Coupe
2000-2003 E52 Z8 Roadster
Part #: A1397U
Price: $49.95 (USD) 
 
Quantity:   

Brake Pads - Hawk Blue Racing
Hawk Blue Racing Brake Pads - Rear - E39, E46, X5, Z4 M (see description)   (more info)
REAR Brake Pad Applications:
2001-2006 E46 BMW330i, 330Ci, 330XiI sedan, coupe, convertible
2001-2006 E46 BMW M3 coupe, convertible
1999-2004 E39 BMW M5
1995-2001 E38 BMW 740i, 740iS, 740iL
1991-1997 E31 BMW 840i, 840Ci, 850i, 850Ci, 850CSi coupe
2004-2010 E83 BMW X3 2.5, X3 2.5i, X3 3.0i, X3 3.0Si
1999-2006 E53BMW X5 3.0, X5 4.4, X5 4.6is, X5 4.8is
2007-2008 E85 BMW Z4 M Roadster, Z4 M Coupe
2000-2003 E52 BMWZ8 Roadster
Part #: HB362E.642
Price: $169.95 (USD) 
 
Quantity:   

Hawk Blue Racing Pads for Brembo Big Brake Kit (Lotus caliper)   (more info)
Hawk Blue compound is a unique, high-tech friction material developed and manufactured by Hawk Brake for the racing community. All Ferro-CarbonTM materials exhibit non-fade performance and have been evaluated up to and beyond 1,800 degrees F. Each material offers lower wear rates and higher torque values than all other competition materials available on the market today. These pads are strictly for track use ONLY! Unlike the TMS carbon pads above, Hawks are not designed to perform at low temperatures that are normally experienced in ANY street car!
Part #: HB194E.570
Price: $169.95 (USD) 
 
Quantity:   

Brake Pads - Hawk DTC-70 Racing
Hawk DTC-70 Race Brake Pads - Rear - E39, E46, X5, Z4 M (see description)   (more info)
The Hawk DTC (Dynamic Torque Control) compound offers the highest friction coefficient of any Hawk pad. The DTC pads offer extremely high torque with aggressive controllable initial bite, superior release and torque control characteristics.
Featuring:
  • High Intial Bite
  • Consistent torque over all pressures
  • Operating Range:400-1600°F; 204-871°C
  • High Temp & High Torque
  • Provides Superior Pad and Disc Wear
  • Excellent Torque Control
  • Excellent Modulation and Release Characteristics
  • Designed for High Deceleration Rates.

    REAR Brake Pad Applications:
    2001-2006 E46 BMW330i, 330Ci, 330XiI sedan, coupe, convertible
    2001-2006 E46 BMW M3 coupe, convertible
    1999-2004 E39 BMW M5
    1995-2001 E38 BMW 740i, 740iS, 740iL
    1991-1997 E31 BMW 840i, 840Ci, 850i, 850Ci, 850CSi coupe
    2004-2010 E83 BMW X3 2.5, X3 2.5i, X3 3.0i, X3 3.0Si
    1999-2006 E53BMW X5 3.0, X5 4.4, X5 4.6is, X5 4.8is
    2007-2008 E85 BMW Z4 M Roadster, Z4 M Coupe
    2000-2003 E52 BMWZ8 Roadster
  • Part #: HB518U.642
    Price: $189.95 (USD) 
     
    Quantity:   

    Brake Pads - Hawk HP Plus Street/Track
    Hawk HP Plus Track/Street Brake Pads - Front - E39 530i/540i/M5, E32, E38, E31 850, X5   (more info)
    FRONT Hawk Brake Pads for:
    1991-1997 E31 8-series: 850i, 850Ci, 850CSi
    1995-2001 E38 7-series: 740i, 740iS, 740iL
    2001-2003 E39 5-series: 530i, 540i sedan, 540iT wagon, M5
    1999-2006 E53 X5 SAV: X5 3.0i, X5 4.4i
    Part #: HB325N.720
    Price: $129.95 (USD) 
     
    Quantity:   

    Hawk HP Plus Track/Street Brake Pads - Rear - E39, E46, X5, Z4 M (see description)   (more info)
    REAR Brake Pad Applications:
    2001-2006 E46 BMW330i, 330Ci, 330XiI sedan, coupe, convertible
    2001-2006 E46 BMW M3 coupe, convertible
    1999-2004 E39 BMW M5
    1995-2001 E38 BMW 740i, 740iS, 740iL
    1991-1997 E31 BMW 840i, 840Ci, 850i, 850Ci, 850CSi coupe
    2004-2010 E83 BMW X3 2.5, X3 2.5i, X3 3.0i, X3 3.0Si
    1999-2006 E53BMW X5 3.0, X5 4.4, X5 4.6is, X5 4.8is
    2007-2008 E85 BMW Z4 M Roadster, Z4 M Coupe
    2000-2003 E52 BMWZ8 Roadster
    Part #: HB362N.642
    Price: $111.95 (USD) 
     
    Quantity:   

    Brake Pads - Hawk HPS Street
    Hawk HPS Street Brake Pads - Front - E39 530/540/M5, E32, E38, E31 850, X5   (more info)
    FRONT Hawk Brake Pad set for:
    1991-1997 E31 8-series: 850i, 850Ci, 850CSi
    1995-2001 E38 7-series: 740i, 740iS, 740iL
    2001-2003 E39 5-series: 530i, 540i sedan, 540iT wagon, M5
    1999-2006 E53 X5 SAV: X5 3.0i, X5 4.4i
    Part #: HB325F.720
    Price: $99.95 (USD) 
     
    Quantity:   

    Hawk HPS Street Pads - Rear - E39, E46, X5, Z4 M (see description)   (more info)
    REAR Brake Pad Applications:
    2001-2006 E46 BMW330i, 330Ci, 330XiI sedan, coupe, convertible
    2001-2006 E46 BMW M3 coupe, convertible
    1999-2004 E39 BMW M5
    1995-2001 E38 BMW 740i, 740iS, 740iL
    1991-1997 E31 BMW 840i, 840Ci, 850i, 850Ci, 850CSi coupe
    2004-2010 E83 BMW X3 2.5, X3 2.5i, X3 3.0i, X3 3.0Si
    1999-2006 E53BMW X5 3.0, X5 4.4, X5 4.6is, X5 4.8is
    2007-2008 E85 BMW Z4 M Roadster, Z4 M Coupe
    2000-2003 E52 BMWZ8 Roadster
    Part #: HB362F.642
    Price: $84.95 (USD) 
     
    Quantity:   

    Brake Pads - Hawk HT10 Racing
    Hawk HT10 Race Brake Pads - Front - E39 530/540/M5, E32, E38, E31 850, X5   (more info)
    Hawk FRONT Brake Pads for:
    1991-1997 E31 8-series: 850i, 850Ci, 850CSi
    1995-2001 E38 7-series: 740i, 740iS, 740iL
    2001-2003 E39 5-series: 530i, 540i sedan, 540iT wagon, M5
    1999-2006 E53 X5 SAV: X5 3.0i, X5 4.4i
    Part #: HB325S.720
    Price: $214.95 (USD) 
     
    Quantity:   

    Hawk HT10 Race Brake Pads - Rear - E39, E46, X5, Z4 M (see description)   (more info)
    REAR Brake Pad Applications:
    2001-2006 E46 BMW330i, 330Ci, 330XiI sedan, coupe, convertible
    2001-2006 E46 BMW M3 coupe, convertible
    1999-2004 E39 BMW M5
    1995-2001 E38 BMW 740i, 740iS, 740iL
    1991-1997 E31 BMW 840i, 840Ci, 850i, 850Ci, 850CSi coupe
    2004-2010 E83 BMW X3 2.5, X3 2.5i, X3 3.0i, X3 3.0Si
    1999-2006 E53BMW X5 3.0, X5 4.4, X5 4.6is, X5 4.8is
    2007-2008 E85 BMW Z4 M Roadster, Z4 M Coupe
    2000-2003 E52 BMWZ8 Roadster
    Part #: HB362S.642
    Price: $174.95 (USD) 
     
    Quantity:   

    Brake Pads - Pagid
    Pagid Brake Pads - Front - E39, E31, E38, E53 (see list inside)   (more info)

    Dark Blue Sport: Street - This is a high performance compound with low fading characteristics and high cold-friction. The most comfortable medium friction sport compound. The Sport Pad is rotor friendly and suitable for street and light track use!

    Yellow RS 19: Racing - Pagid's classic compound for endurance racing on the basis of the RS 14. A slight reduction of the friction value improves the modulation (controllability). Constant temperatures up to 600°C (1.100°F) are possible. The combination of friction value, fading stability and low wear rates on pads and discs (rotors) realized with this pad compound is unmatched up to now. Due to its outstanding wear rate and driveability, PAGID endurance materials are often used at sprint races. A multiple winner of Daytona 24h, Le Mans 24h, Sebring 12h, Spa 24 h, Nürburgring 24h, often with no pad change and usually no disc (rotor) change.

    Since Pagid pads tend to "out-gas" we recommend using these pads with a new gas-slotted or cross-drilled rotor for the best performance. Pagid brake pads are not compatible with previously used rotors, especially if used with a carbon or Kevlar based race pad.

    Pagid Brake FRONT Pads to fit the following BMWs:
    1991-1997 E31 8-series: 850i, 850Ci, 850CSi
    1995-2001 E38 7-series: 740i, 740iS, 740iL
    2001-2003 E39 5-series: 530i, 540i sedan, 540iT wagon, M5
    1999-2006 E53 X5 SAV: X5 3.0i, X5 4.4i

    Part #: U2683
    Price: $193.45 (USD) 
     
    More Information

    Pagid Brake Pads - Rear - E46 330/M3, E39 M5, E38 all, E53 X5 all, E83 X3 all, Z4 M, Z8   (more info)

    Dark Blue Sport: Street - This is a high performance compound with low fading characteristics and high cold-friction. The most comfortable medium friction sport compound. The Sport Pad is rotor friendly and suitable for street and light track use!

    Yellow RS 19: Racing - Pagid's classic compound for endurance racing on the basis of the RS 14. A slight reduction of the friction value improves the modulation (controllability). Constant temperatures up to 600°C (1.100°F) are possible. The combination of friction value, fading stability and low wear rates on pads and discs (rotors) realized with this pad compound is unmatched up to now. Due to its outstanding wear rate and driveability, PAGID endurance materials are often used at sprint races. A multiple winner of Daytona 24h, Le Mans 24h, Sebring 12h, Spa 24 h, Nürburgring 24h, often with no pad change and usually no disc (rotor) change.

    Yellow RS 29: Racing New endurance compound. This compound combines the outstanding wear rate of the RS19 with a slightly higher coefficient of friction and initial bite. Due to its outstanding wear rate and driveability, PAGID endurance materials are often used at sprint races as well.

    Since Pagid pads tend to "out-gas" we recommend using these pads with a new gas-slotted or cross-drilled rotor for the best performance. Pagid brake pads are not compatible with previously used rotors, especially if used with a carbon or Kevlar based race pad.

    This item fits the following BMWs:
    1999-2005 E46 BMW 330i 330ci 330xi M3
    1999-2003 E39 BMW M5
    1995-2001 E38 BMW 740i 740il
    1991-1997 E31 BMW 840i 840ci 850i 850ci 850csi
    2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
    2000-2006 E53 BMW X5 3.0i X5 4.4i X5 4.6is X5 4.8is
    2006-2008 Z4 BMW Z4 M Roadster M Coupe
    2000-2003 E52 BMW Z8 Roadster

    Part #: U2685
    Price: $187.53 (USD) 
     
    More Information

    Brake Pads - StopTech Street Performance
    StopTech Street Performance Brake Pads - Rear - E31, E38, E39 M5, E46 330/M3, E53, E83, Z4M, Z8   (more info)
    StopTech Street Performance front brake pads are designed for high-performance street drivers who want a high-quality and capable pad that won't break the wallet. These pads feature an innovative composite compound that is quiet, great bite and modulation, low fade under hard street-type use (and autocross, light track). We've tried these pads and love how capable they were when used hard but also how easy they were for regular stop-and-go driving. This might be the last brake pad you will ever need!

    Position: both rear calipers (should only be combined with StopTech Street Performance front pads).

    This item fits the following BMWs:
    1999-2005 E46 BMW 330i 330ci 330xi M3
    1997-2003 E39 BMW M5
    1995-2001 E38 BMW 740i 740il 750il
    1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
    2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
    2000-2006 E53 BMW X5 3.0i X5 4.4i X5 4.6is X5 4.8is
    2003-2008 E85 BMW Z4 M Roadster M Coupe
    2000-2003 E52 BMW Z8 Roadster
    Part #: 309.06830
    Price: $59.95 (USD) 
     
    Quantity:   

    StopTech Street Performance Brake Pads for StopTech ST40 4-Piston Caliper   (more info)
    StopTech Street Performance brake pads that fit the StopTech 4-piston ST40 caliper. These are the same pads that come standard in all StopTech Big Brake Kits. Price is for one set.
    Part #: 309.06090
    Price: $68.95 (USD) 
     
    Quantity:   

    Brake Pads - TMS Racing
    E31 840i (with Brembo calipers) Front Cool Willy Racing Brake Pads (set)   (more info)
    Since trying the first set of these pads back in 1991, TMS has not found a better all around pad for Drivers schools! Unlike other racing pads these pads will work great when stone cold. Although we do not recommend that you used these on the street, due
    Part #: 639
    Price: $139.00 (USD) 
     
    Quantity:   

    E31 850i (without Brembo calipers) Front Cool Willy Racing Brake Pads (set)   (more info)
    Since trying the first set of these pads back in 1991, TMS has not found a better all around pad for Drivers schools! Unlike other racing pads these pads will work great when stone cold. Although we do not recommend that you used these on the street, due
    Part #: 547
    Price: $125.00 (USD) 
     
    Quantity:   

    Front Cool Willy Racing Brake Pads for E39, E31, E38, X5 (Warehouse Clearance!)   (more info)
    A great all-around pad for driver's schools. Capable of occasional street use. This is a set of brand new, in the box, brake pads. Fits the following BMWs:
    1991-1997 E31 8-series: 850i, 850Ci, 850CSi
    1995-2001 E38 7-series: 740i, 740iS, 740iL
    2001-2003 E39 5-series: 530i, 540i sedan, 540iT wagon, M5
    1999-2006 E53 X5 SAV: X5 3.0, X5 4.4,
    Part #: 681
    Regular Price: $174.95 (USD)
     Sale Price: $99.00 (USD) 
     
    Quantity:   

    Brake Pads for Brembo Calipers
    Hawk HP Plus Track/Street Pads for Brembo Big Brake Kit (Lotus caliper)   (more info)
    Hawk HP Plus pads were designed for autocross use and are a great pad when a track pad is needed for light use on the street. It was designed specifically for autocross, Solo II, and driver school events. HP Plus pads feature high friction levels in a broad temperature range, allowing you to use these pads to get to and from the track and still achieve ‘race-level’ braking performance on the course.

    These pads fit the Brembo calipers commonly known as the Lotus caliper and will work in any application that uses the Lotus caliper. These are Brembo pad part #107.5146.31. The Lotus calipers are used in the following BMW Brembo kits:
    E30: E30 M3 front
    E36: E36 M3 rear
    E46: E46 M3 rear
    E90/E92: E90 325/330/335 rear
    Z3: MZ3 rear
    Z4: Z4 M rear
    MINI R53: MINI Cooper/Cooper S rear

    Part #: HB194N.570
    Price: $132.95 (USD) 
     
    Quantity:   

    Hawk HPS Street Brake Pads - Front - E31 840/850 4-Piston Brembo Kit (and Nissan 350Z Brembo Kit)   (more info)
    Front Hawk HPS pads for the 4 piston Brembo Big Brake Kit used on the E31 840i/850i, as well as the Nissan 350Z 4-piston Brembo brakes.
    Part #: HB181F.590
    Price: $109.95 (USD) 
     
    Quantity:   

    Hawk HPS Street Pads for Brembo Big Brake Kit (F40 Calipers)   (more info)
    The HPS pads are perfect for drivers who don’t want the standard replacement pad and want something that will hold up for aggressive street and light autocross/track driving. These pads fit the Brembo F40 calipers used in several Brembo Big Brake Kits. These pads will work in any application that uses the F40 caliper designation. These are Brembo pad part #ST04R592-15.

    These pads fit the Brembo F40 calipers used in several Brembo Big Brake Kits. These pads will work in any application that uses the F40 caliper designation. These are Brembo pad part #ST04R592-15. F40 calipers are used in the following BMW Brembo kits:
    E36 323/325/328/M3: E36 front 320mm, E36 M3 front 332mm, E36 M3 front 355mm/4-piston
    E46 323/325/328/330/M3: E46 front 320mm, E46 330 rear 345mm, E46 M3 front 355mm/4-piston
    E90 325/330: E90 325/330 front 355mm/4-piston
    Z3 2.3/2.8/3.0, MZ3: Z3 front 320mm, MZ3 front 332mm, MZ3 front 355mm/4-piston
    Z4 2.5/3.0, Z4 M: Z4 front 320mm, Z4 M front 355mm/4-piston
    E39 525/528/530/540/M5: E39/E39 M5 rear 345mm
    E60 525/530/545/550/M5: E60/E60 M5 rear
    E63/E64 645/650/M6: E63/E63 M6 rear
    McLaren F1: F1 front

    Part #: HB193F.670
    Price: $119.95 (USD) 
     
    Quantity:   

    Pagid Track/Race Brake Pads - Yellow RS29 - for Brembo Big Brake Kit (F40/F50 Calipers)   (more info)

    Yellow RS 29: Racing New endurance compound. This compound combines the outstanding wear rate of the RS19 with a slightly higher coefficient of friction and initial bite. Due to its outstanding wear rate and driveability, PAGID endurance materials are often used at sprint races as well.

    These pads fit the Brembo F40 calipers used in several Brembo Big Brake Kits and Gran Turismo kits. These pads will work in any application that uses the F40 caliper designation. These are Brembo pad part #ST04R592-15. F40 calipers are used in the following BMW Brembo kits:
    E36 323/325/328/M3: E36 front 320mm, E36 M3 front 332mm, E36 M3 front 355mm/4-piston
    E46 323/325/328/330/M3: E46 front 320mm, E46 330 rear 345mm, E46 M3 front 355mm/4-piston
    E90 325/330: E90 325/330 front 355mm/4-piston
    Z3 2.3/2.8/3.0, MZ3: Z3 front 320mm, MZ3 front 332mm, MZ3 front 355mm/4-piston
    Z4 2.5/3.0, Z4 M: Z4 front 320mm, Z4 M front 355mm/4-piston
    E39 525/528/530/540/M5: E39/E39 M5 rear 345mm
    E60 525/530/545/550/M5: E60/E60 M5 rear
    E63/E64 645/650/M6: E63/E63 M6 rear
    McLaren F1: F1 front

    Part #: U1287/RS29
    Price: $329.95 (USD) 
     
    Quantity:   

    Brake Pads for StopTech Calipers
    StopTech Street Performance Brake Pads for StopTech ST40 4-Piston Caliper   (more info)
    StopTech Street Performance brake pads that fit the StopTech 4-piston ST40 caliper. These are the same pads that come standard in all StopTech Big Brake Kits. Price is for one set.
    Part #: 309.06090
    Price: $68.95 (USD) 
     
    Quantity:   

    Brake Rotors - OEM Front
    Front Brake Rotors - E31 840Ci & 850Ci (with Brembo Calipers) - (pair)   (more info)
    This is a pair (2) front brake rotors/discs for the E31 8 series 840Ci and 850Ci which have Brembo calipers. This set includes one left front brake rotor, and one right front brake rotor.

    These front brake discs / rotors fit:
    1993-1997 E31 8 series 840Ci ** with Brembo calipers
    1994-1997 E31 8 series 850Ci ** with Brembo calipers
    Part #: 34116756087 (34-11-6-756-087)
    Price: $179.90 (USD) 
     
    Quantity:   

    Front Brake Rotors - E39 540i/Touring -3/00, E38 740i/iL -12/00, 850i -8/93, 850CSi (pair)   (more info)
    These are a replacement brake rotor for your BMW made by a top O.E. supplier. This is one pair of front brake rotors/discs / discs, and includes one left front and one right front brake disc.

    These front brake discs / rotors fit:
    1997-2000 E39 5 Series 540i sedan & touring **up to 3/00 prod date
    1995-2000 E38 7 Series 740i / 740iL **up to 2/00 prod date
    1991-1993 E31 8 Series 850i (**up to 8/93 prod date)
    1994-1995 E31 8 Series 850CSi
    Part #: 34111159895 (34-11-1-159-895)
    Price: $152.95 (USD) 
     
    Quantity:   

    Brake Rotors - OEM Rear
    Rear Brake Rotors - E31 840/850, E38 740i & 740il (Pair)   (more info)
    This is one pair (2) of REAR brake rotors / brake discs for the E38 740i & 740iL, as well as the E31 840i & 850i. Includes one left rear brake rotor, and one right rear brake rotor. Price is for the pair.

    These REAR brake rotors fit:
    1995-2001 E38 7 Series 740i & 740iL (V8)
    1989-1999 E31 8 Series 840i, 850i, 850Ci, 850Csi
    Part #: 34216757748 (34-21-6-757-748)
    Price: $109.90 (USD) 
     
    Quantity:   

    StopTech Replacement Rotors
    Replacement StopTech 328x28mm Rotors for Big Brake Kits - Left & Right Pair   (more info)
    Replacement StopTech AeroRotor for big brake kits - 328mm diameter, 28mm thickness. Choose from either slotted or cross-drilled and standard finish or corrosion-resistant zinc coating. Comes with new mounting hardware to re-use the original StopTech mounting hat. This is for a Left and Right Pair.

    Size: 328x28mm
    Type: Gas-Slotted or Cross-Drilled
    Finish: standard finish (no coating), or zinc coating
    Fitment: Left and Right Pair
    Applications: Fits any StopTech Big Brake Kit that uses the 328x28mm disc.
    Part #: STOPTECH328X28
    Price: $460.00 (USD) 
     
    More Information

    Replacement StopTech 332x32mm Rotors for Big Brake Kits - Left & Right Pair   (more info)
    Replacement StopTech AeroRotor for big brake kits - 332mm diameter, 32mm thickness. Choose from either slotted or cross-drilled and standard finish or corrosion-resistant zinc coating. Comes with new mounting hardware to re-use the original StopTech mounting hat. This is for a Left and Right Pair.

    Size: 332x32mm
    Type: Gas-Slotted or Cross-Drilled
    Finish: standard finish (no coating), or zinc coating
    Fitment: Left and Right Pair
    Applications: Fits any StopTech Big Brake Kit that uses the 332x32mm disc.
    Part #: STOPTECH332X32
    Price: $500.00 (USD) 
     
    More Information

    Replacement StopTech 345x28mm Rotors for Big Brake Kits - Left & Right Pair   (more info)
    Replacement StopTech AeroRotor for big brake kits - 345mm diameter, 28mm thickness. Choose from either slotted or cross-drilled and standard finish or corrosion-resistant zinc coating. Comes with new mounting hardware to re-use the original StopTech mounting hat. This is for a Left and Right Pair.

    Size: 345x28mm
    Type: Gas-Slotted or Cross-Drilled
    Finish: standard finish (no coating), or zinc coating
    Fitment: Left and Right Pair
    Applications: Fits any StopTech Big Brake Kit that uses the 345x28mm disc.
    Part #: STOPTECH345X28
    Price: $510.00 (USD) 
     
    More Information

    Replacement StopTech 355x32mm Rotors for Big Brake Kits - Left & Right Pair   (more info)
    Replacement StopTech AeroRotor for big brake kits - 355mm diameter, 32mm thickness. Choose from either slotted or cross-drilled and standard finish or corrosion-resistant zinc coating. Comes with new mounting hardware to re-use the original StopTech mounting hat. This is for a Left and Right Pair.

    Size: 355x32mm
    Type: Gas-Slotted or Cross-Drilled
    Finish: standard finish (no coating), or zinc coating
    Fitment: Left and Right Pair
    Applications: Fits any StopTech Big Brake Kit that uses the 355x32mm disc.
    Part #: STOPTECH355X32
    Price: $520.00 (USD) 
     
    More Information

    Replacement StopTech 380x32mm Rotors for Big Brake Kits - Left & Right Pair   (more info)
    Replacement StopTech AeroRotor for big brake kits - 380mm diameter, 32mm thickness. Choose from either slotted or cross-drilled and standard finish or corrosion-resistant zinc coating. Comes with new mounting hardware to re-use the original StopTech mounting hat. This is for a Left and Right Pair.

    Size: 380x32mm
    Type: Gas-Slotted or Cross-Drilled
    Finish: standard finish (no coating), or zinc coating
    Fitment: Left and Right Pair
    Applications: Fits any StopTech Big Brake Kit that uses the 380x32mm disc.
    Part #: STOPTECH380X32
    Price: $560.00 (USD) 
     
    More Information