Contact YouTube Blog Twitter facebook Turner Motorsport on Instagram
1-800-280-6966
Login   |

0 item(s) in your Shopping Cart
Language:
Currency:
VAT Mode:
Get notified about money saving
specials & deals for your BMW
enter your email address
  • 18 years of BMW Tuning.
  • Award winning service.
  • 1,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook


    BMW E36 Brake Calipers

    Brake calipers require periodic maintenance just like the rest of your braking system. The number one problem with brake calipers is caused by rust. The caliper and the internal piston are made from cast iron and is prone to rust just like any other ferrous material. Not replacing your brake fluid regularly will lead to water entering or forming in the system and that will rust the calipers and hard brake lines from the inside out. A rusted caliper will cause the piston to seize, creating a stuck caliper, dragging brakes, wheel vibrations, pulling to one side, excessive brake dust and heat, or even a total loss of brake function on that wheel.

    We offer brake caliper rebuild kits but sometimes the condition of the inner piston is just not safe to re-use. Unfortunately you really don't know for sure until you have removed the caliper and taken it apart. As a convenience we offer freshly rebuilt calipers. Each caliper is cleaned and sand-blasted to remove surface rust and dirt/grime. The pistons are rebuilt with new seals and dust boots and re-installed into the caliper housing. The caliper you get is ready for a direct replacement on your car! There's no mess from brake fluid leaking everywhere and no fighting to get the piston seals to fit. Replacing the calipers with newly rebuilt units does not take any more signifcant time during a typical brake pad/rotor overhaul. Rebuilt calipers are sold on a core exchange basis so we need your original calipers returned to us.
    You're currently viewing parts for your (E36) 3-series 1992-1999. Reset your chassis
    For accurate results, specify your year and model below.
    OEM / ATE Left Front caliper Fits all E36 M3 and all M Coupe/Roadster. This is not a rebuild - this is a new caliper, at an incredible price!
    Part #: 34112227515
    Price: $239.00 (USD) 
    Quantity:   
    LEFT FRONT. *New* caliper from Ate.
    Applications:
    1992-1999 E36 318i, 318is, 318ic, 325i, 323is, 323ic, 325is, 325ic, 328i, 328is, 328ic
    1999-2005 E46 323i, 323ci, 328i, 328ci, 325i, 325ci
    1997-2001 Z3 all (non M)
    2004-2005 Z4 2.5, Z4 3.0
    Part #: 34116758113
    Price: $225.00 (USD) 
    Quantity:   
    OEM / ATE Right Front caliper Fits all E36 M3 and all M Coupe/Roadster. This is not a rebuild - this is a new caliper, at an incredible price!
    Part #: 34112227516
    Price: $239.00 (USD) 
    Quantity:   
    RIGHT FRONT. *New* caliper from Ate.
    Applications:
    1992-1999 E36 318i, 318is, 318ic, 325i, 323is, 323ic, 325is, 325ic, 328i, 328is, 328ic
    1999-2005 E46 323i, 323ci, 328i, 328ci, 325i, 325ci
    1997-2001 Z3 all (non M)
    2004-2005 Z4 2.5, Z4 3.0
    Part #: 34116758114
    Price: $225.00 (USD) 
    Quantity:   
    LEFT REAR. This is a brand-new stock caliper for replacement on the E36 M3. It fits all versions of the E36 M3, 1995, 1996, 1997, 1998, 1999. This is a new caliper from BMW. Price is for the left (driver's) side.
    Part #: 34212227519
    Price: $336.95 (USD) 
    Quantity:   
    RIGHT REAR. This is a brand-new stock caliper for replacement on the E36 M3. It fits all versions of the E36 M3, 1995, 1996, 1997, 1998, 1999. This is a new caliper from BMW - the only source for rear calipers on this car. Price is for the right (passenger's) side.
    Part #: 34212227520
    Price: $336.95 (USD) 
    Quantity:   
    Our rebuilt calipers start off with an original BMW caliper that is fully disassembled thoroughly inspected and carefully processed. All threads are chased, all groves are meticulously cleaned and checked. Pistons are replaced if any dents or scratches are found. All rubber components and hardware are replaced with new OE quality parts. The units are then air pressure tested and submitted to a thorough final inspection.

    This item fits the following BMWs:
    1994-4/1998 E36 BMW 318ti
    1996-1998 Z3 BMW Z3 1.9
    Part #: 34111160345R
    Price: $45.95 (USD) 
    Our rebuilt calipers start off with an original BMW caliper that is fully disassembled thoroughly inspected and carefully processed. All threads are chased, all groves are meticulously cleaned and checked. Pistons are replaced if any dents or scratches are found. All rubber components and hardware are replaced with new OE quality parts. The units are then air pressure tested and submitted to a thorough final inspection.

    This item fits the following BMWs:
    1995-1998 E36 BMW M3, M3 Convertible
    1998-2002 Z3 BMW M Roadster M Coupe
    Part #: 34112227515R
    Price: $48.95 (USD) 
    Our rebuilt calipers start off with an original BMW caliper that is fully disassembled thoroughly inspected and carefully processed. All threads are chased, all groves are meticulously cleaned and checked. Pistons are replaced if any dents or scratches are found. All rubber components and hardware are replaced with new OE quality parts. The units are then air pressure tested and submitted to a thorough final inspection.

    Must re-use existing caliper bracket.

    This item fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
    4/1998-1999 E36 BMW 318ti
    1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8
    2003-2005 E85 BMW Z4 2.5i
    Part #: 34116758113R
    Price: $45.95 (USD) 
    Our rebuilt calipers start off with an original BMW caliper that is fully disassembled thoroughly inspected and carefully processed. All threads are chased, all groves are meticulously cleaned and checked. Pistons are replaced if any dents or scratches are found. All rubber components and hardware are replaced with new OE quality parts. The units are then air pressure tested and submitted to a thorough final inspection.

    This item fits the following BMWs:
    1994-4/1998 E36 BMW 318ti
    1996-1998 Z3 BMW Z3 1.9
    Part #: 34111160346R
    Price: $45.95 (USD) 
    Our rebuilt calipers start off with an original BMW caliper that is fully disassembled thoroughly inspected and carefully processed. All threads are chased, all groves are meticulously cleaned and checked. Pistons are replaced if any dents or scratches are found. All rubber components and hardware are replaced with new OE quality parts. The units are then air pressure tested and submitted to a thorough final inspection.

    This item fits the following BMWs:
    1995-1998 E36 BMW M3, M3 Convertible
    1998-2002 Z3 BMW M Roadster M Coupe
    Part #: 34112227516R
    Price: $48.95 (USD) 
    Our rebuilt calipers start off with an original BMW caliper that is fully disassembled thoroughly inspected and carefully processed. All threads are chased, all groves are meticulously cleaned and checked. Pistons are replaced if any dents or scratches are found. All rubber components and hardware are replaced with new OE quality parts. The units are then air pressure tested and submitted to a thorough final inspection.

    Must re-use existing caliper bracket.

    This item fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
    4/1998-1999 E36 BMW 318ti
    1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8
    2003-2005 E85 BMW Z4 2.5i
    Part #: 34116758114R
    Price: $45.95 (USD) 
    Our rebuilt calipers start off with an original BMW caliper that is fully disassembled thoroughly inspected and carefully processed. All threads are chased, all groves are meticulously cleaned and checked. Pistons are replaced if any dents or scratches are found. All rubber components and hardware are replaced with new OE quality parts. The units are then air pressure tested and submitted to a thorough final inspection.

    This item fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ic 323is 325i 325is 325ic 328i 328is
    Part #: 34211160333R
    Price: $49.95 (USD) 
    Our rebuilt calipers start off with an original BMW caliper that is fully disassembled thoroughly inspected and carefully processed. All threads are chased, all groves are meticulously cleaned and checked. Pistons are replaced if any dents or scratches are found. All rubber components and hardware are replaced with new OE quality parts. The units are then air pressure tested and submitted to a thorough final inspection.

    This item fits the following BMWs:
    1995-1998 E36 BMW 318ti
    Part #: 34211162437R
    Price: $69.95 (USD) 
    Our rebuilt calipers start off with an original BMW caliper that is fully disassembled thoroughly inspected and carefully processed. All threads are chased, all groves are meticulously cleaned and checked. Pistons are replaced if any dents or scratches are found. All rubber components and hardware are replaced with new OE quality parts. The units are then air pressure tested and submitted to a thorough final inspection.

    This item fits the following BMWs:
    1996-1999 E36 BMW 323ic 328ic - Convertible only
    Part #: 34211162939R
    Price: $74.95 (USD) 
    Our rebuilt calipers start off with an original BMW caliper that is fully disassembled thoroughly inspected and carefully processed. All threads are chased, all groves are meticulously cleaned and checked. Pistons are replaced if any dents or scratches are found. All rubber components and hardware are replaced with new OE quality parts. The units are then air pressure tested and submitted to a thorough final inspection.

    This item fits the following BMWs:
    1995-1999 E36 BMW M3, M3 Convertible
    Part #: 34212227519R
    Price: $79.95 (USD) 
    Our rebuilt calipers start off with an original BMW caliper that is fully disassembled thoroughly inspected and carefully processed. All threads are chased, all groves are meticulously cleaned and checked. Pistons are replaced if any dents or scratches are found. All rubber components and hardware are replaced with new OE quality parts. The units are then air pressure tested and submitted to a thorough final inspection.

    This item fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ic 323is 325i 325is 325ic 328i 328is
    Part #: 34211160334R
    Price: $49.95 (USD) 
    Our rebuilt calipers start off with an original BMW caliper that is fully disassembled thoroughly inspected and carefully processed. All threads are chased, all groves are meticulously cleaned and checked. Pistons are replaced if any dents or scratches are found. All rubber components and hardware are replaced with new OE quality parts. The units are then air pressure tested and submitted to a thorough final inspection.

    This item fits the following BMWs:
    1995-1998 E36 BMW 318ti
    Part #: 34211162438R
    Price: $69.95 (USD) 
    Our rebuilt calipers start off with an original BMW caliper that is fully disassembled thoroughly inspected and carefully processed. All threads are chased, all groves are meticulously cleaned and checked. Pistons are replaced if any dents or scratches are found. All rubber components and hardware are replaced with new OE quality parts. The units are then air pressure tested and submitted to a thorough final inspection.

    This item fits the following BMWs:
    1996-1999 E36 BMW 323ic 328ic - Convertible only
    Part #: 34211162940R
    Price: $74.95 (USD) 
    Our rebuilt calipers start off with an original BMW caliper that is fully disassembled thoroughly inspected and carefully processed. All threads are chased, all groves are meticulously cleaned and checked. Pistons are replaced if any dents or scratches are found. All rubber components and hardware are replaced with new OE quality parts. The units are then air pressure tested and submitted to a thorough final inspection.

    This item fits the following BMWs:
    1995-1999 E36 BMW M3, M3 Convertible
    Part #: 34212227520R
    Price: $79.95 (USD) 
    Stock E36 M3 brake caliper carrier bracket, manufactured by ATE. This can be used either as a replacement of your stock brake caliper brackets on your 1995-1999 E36 M3, or to convert non-M3 brakes to the M3 brakes. This bracket can be used on both the left or right side of the car.

    If you are overhauling your brakes, replacing or rebuilding your calipers, this is your chance to replace your old rusted caliper brackets with new ones. We have a tremendous price on these brand new ATE caliper carrier brackets. These are normally prohibitively expensive, making replacement simply not feasible or worthwhile. At this price, you should consider these new E36 M3 caliper brackets, rather than re-using your old ones. Sold individually, 2 used on each car.
    Part #: 34112226875
    Price: $325.95 (USD) 
    Quantity:   
    As Used on Project E36 M3
    This kit will eliminate caliper twisting caused by rubber guide pin bushings. This kit, consisting of precision guide pins and machined brass guide bushings will allow your calipers to squeeze evenly on both sides of the brake rotor, just like expensive multi-piston big brake kits. This will result in much longer pad life and more consistent brake system feel. These are a must if you race your BMW. This kit is SCCA and BMW CCA Club Racing approved. This kit fits both the front or rear calipers (but sold per axle). The ideal set-up is to run both front and rear on your car. Installation is quite simple. Does not fit E30 318/325 with Girling calipers nor E24 M6/E28 M5.
    Part #: CBMW1
    Regular Price: $59.95 (USD)
     Sale Price: $53.96 (USD) 
    Quantity:   
    Most BMWs have a 7mm female hex bolt for their caliper guide bolt (what the caliper slides in and out on). And most common hex / Allen socket sets include a 7mm. But one problem you may find yourself in is that the rear shock interferes with the rear caliper guide bolts. Most off-the-shelf sockets are too long overall to fit in between the shock body and where the guide bolt is. This 'stubby' 7mm Allen is the perfect solution. It takes a 3/8 drive and stands 32mm tall (a comparable Craftsman is over 45mm). The Allen section itself is 13mm which allows it to fully engage the guide bolt and leave the minimum amount hanging outside for your ratchet.

    Since the 7mm caliper guide bolt is used on almost all BMWs built since 1982, this tool will prove to be extremely useful to any DIYer. 7mm caliper socket applies to the following BMW models:
    E24, E28, E30, E31, E32, E34, E36, E38, E39, E46, E52, E53, E60, E61, E63, E64, E65, E66, E70, E71, E82, E83, E85, E86, E89, E90, E91, E92, E93, F01, F02, F07, F10, F12, F13, Z3, MINI R50, MINI R52, MINI R53
    Part #: BMW 377
    Price: $23.00 (USD) 
    Quantity: