BMW Brake Calipers for BMW 3 Series E46 (1999-2005)

ECS Tuning designed these caliper brackets to allow you to upgrade to CSL rotors without the pricetag of OEM part #34112282619, they are functionally the same part.

These will work with any 345x28mm E46 M3 rotor, and you do not need to upgrade from stock brake lines, calipers, or pads - they will all work with this bracket. Allows you to upgrade the size of your rotors!

This kit includes a carrier for the left and right side of your vehicle, allowing you to convert to ZCP/CSL rotors for half the price of the OEM carriers!

BMW E46 M3 and Z4 Front Brake Caliper - Left

Ensure optimal braking performance with the BMW E46 M3 and Z4 Front Brake Caliper - Left from Turner Motorsport. Brake calipers are subjected to extreme conditions and constant use, making replacement a necessity at least once during your vehicle's lifespan. Exposed to harsh elements and high temperatures, brake calipers can suffer from seizing, dragging, or sticking, leading to compromised safety and performance. Moisture can also infiltrate the brake fluid, causing internal damage over time.

Benefits:

• Restores braking efficiency and responsiveness
• Ensures safe and reliable stopping power
• Enhances overall driving experience

Don't compromise on safety or performance. Replace your worn or damaged brake caliper with the BMW E46 M3 and Z4 Front Brake Caliper - Left today.

BMW 135i Brembo Caliper Brackets (E36/46 Non-M) - For E46 M3 CSL Rotors are precision-engineered brackets designed to enable the use of E46 M3 CSL rotors with Brembo calipers on non-M E36 and E46 BMW models. These brackets are essential for upgrading your braking system to achieve enhanced performance and improved stopping power.

• Enhanced Braking Performance: Allows the use of high-performance E46 M3 CSL rotors with Brembo calipers.
• Precision Engineering: Designed specifically for BMW E36 and E46 non-M models.
• Improved Stopping Power: Upgrades your braking system for better heat dissipation and reduced fade.
• High-Quality Construction: Ensures durability and reliability under demanding conditions.
• Direct Fitment: Easy installation with no need for additional modifications.

Upgrade your BMW's braking system with these caliper brackets to experience superior performance and enhanced safety on the road.

BMW 135i Brembo Caliper Brackets are the perfect upgrade for enhancing your BMW's braking performance. Designed by Reboot Engineering, these brackets allow for the installation of BMW 135i front calipers on non-M E36 and E46 models. With these brackets, you can use larger brake pads, resulting in significantly improved braking power. Constructed from high-quality 6061 aluminum, they offer exceptional durability and come in a sleek black finish, adding a stylish touch to your vehicle’s braking system.

• Enhanced Braking Performance: Supports the installation of larger brake pads for superior stopping power.
• High-Quality Construction: Made from durable 6061 aluminum for long-lasting performance.
• Sleek Appearance: Available in a black finish for a clean, professional look.
• Compatibility: Fits non-M E36 and E46 models with BMW 135i front calipers.
• Custom Fit: Requires minor dust shield modification and is compatible with various rotor sizes.

The ultimate upgrade when it comes to improving stopping power!

Complete with stunning, British-engineered six-piston calipers and all the hardware you need to completely replace all equivalent components of the front axle of your vehicle’s stock braking system, these complete kits give a firmer and more responsive brake pedal feel and allow you to drive much longer without the onset of brake fade.

EBC Racing Brake Kits come with fully‐floating 2‐piece rotors as standard. These rotors allow the cast iron rotor ring to float independently of the hub, preventing disc cracking and leading to reliable performance even when subjected to the most demanding driving conditions.

This kit comes with everything you need in the box and a detailed vehicle-specific installation pack, including race-spec brake fluid for the final system bleed.

Key Features:

Apollo-Series 6-Piston Calipers

Two-piece bolted design that incorporates high-tensile 12.9-grade steel bolts for reinforcement of the caliper bridge section (computer FEA analysis shows that this offers significant improvements in caliper stiffness compared to a monobloc design) Machined from heat-treated low-pressure castings (this offers a noticeable performance advantage over conventional gravity cast calipers, exhibiting higher overall strength and a comparable caliper body stiffness to forging) High-temperature fluid seals coupled with full boot-type dust seals give maximum protection against road grime and debris Lightweight, hard-anodized aluminium staggered pistons with serrated/castellated piston noses that reduce heat transfer into the braking hydraulics Every single brake caliper pressure tested to 2,500psi Uses standard pad shapes, giving choice when selecting brake pads Fully-Floating Two-Piece Discs

Fully-floating 355x32mm two-piece discs that allow the outer ring to expand freely in response to heat (this reduces stress which in turn extends disc life and reduces the tendency for disc cracking during extreme use) Drive bobbins machined from a single piece of stainless steel giving maximum strength and corrosion resistance (this reduces maintenance requirements and ensures the outer ring continues to float freely over time) Disc rings feature 48 directional internal curved vanes for improved cooling Unique ‘Swept Groove’ slot design for effective evacuation of braking dust and gases whilst ensuring good initial bite on brake application Now featuring the latest thermic black corrosion-resistant finish – the very latest in rust prevention Bluestuff™ NDX Performance Brake Pads

Now road legal in most markets, Bluestuff™ NDX combines excellent cold bite with the capability to perform well in short spells of track/race conditions Stainless Steel Braided Brake Lines

Every hose has a stainless-steel braided exterior that prevents a phenomenon known as ‘ballooning’, this braided exterior prevents the spongey feel of OE rubber lines and provides greater precision and feel under braking Super DOT 4 Brake Fluid

Every kit is supplied with 1 litre of BF307+ super DOT 4 brake fluid. This fluid has a 310°C boiling point – a significantly higher boiling point than standard DOT 5.1 fluid Having such a high boiling point gives the braking system exceptional endurance, allowing you to push hard for extended periods without heat soak causing the fluid to boil and resulting in fade

The caliper sliding bolts are one of the most overlooked wear items in your braking system. Subjected to constant motion and often without adequate lubrication the guide bolts see a lot of wear and tear. Factory BMW caliper guide bolts are very expensive from the dealer - these 304 stainless steel bolts are less than half the price and provide outstanding resistance to corrosion and wear. They are manufacturered with tighter tolerances than the factory bolts too.

Price is per bolt unless noted (2 required per caliper).

Enter your vehicle info for specific fitment information.