BMW E21 320i M10 1.8L

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

Bluetooth accessory kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AGA Tools - Corporate Logo
T#:5189119
Part#: AGA-ASC-BT35
In Stock
$ 45.99 USD
Free Shipping on orders $49 and up
Add Bluetooth to your car if it doesn't have it.
Wheel Lock Removal Set - for OEM BMW wheels
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AGA Tools - Corporate Logo
T#:5175718
Part#: AGA-WLRT
In Stock
$ 429.00 USD
Free Shipping
$ 429.00 USD
Free Shipping
Easily removed wheel locks that are stripped or the key cannot be found.
Fuel injector and fuel supply rail caps
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AGA Tools - Corporate Logo
T#:5135630
Part#: AGA-CI-Y12
In Stock
$ 31.99 USD
Free Shipping on orders $49 and up
Don't let dirt be the reason for bad fuel injectors.

Brake Bleeder Reservoir Cap - European
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AGA Tools - Corporate Logo
T#:5175739
Part#: AGA-BPB-CE
Ships in 7 Business Days
$ 56.00 USD
Free Shipping on orders $49 and up
Designed to make bleeding brakes much easier!

Drive Shaft Wrench
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AGA Tools - Corporate Logo
T#:5189118
Part#: AGA-DSW-50
Ships in 7 Business Days
$ 199.00 USD
Free Shipping
$ 199.00 USD
Free Shipping
This tool is a must to properly disconnect the driveshaft.
Universal Clean Oil Funnel Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AGA Tools - Corporate Logo
T#:24179137
Part#: AGA-COFK
In Stock
$ 99.99 USD
Free Shipping on orders $49 and up

AGA Tools' Clean Oil Funnel Kit is expertly designed to streamline and improve the engine oil-filling process, catering to the needs of both professional auto shops and DIY enthusiasts.


With a set of 13 manufacturer-specific adapters, the kit accommodates a broad spectrum of vehicles, including the latest BMW and Mercedes-Benz models featuring the 1/4 turn style. The kit includes a comprehensive information card that showcases color-coded adapters for easy reference.


The funnel features a generously wide mouth, enabling the spill-free pouring of an entire quart of oil. Designed to adapt to angled valve covers, the kit comes with angled attachments, ensuring compatibility with various configurations. After use, seal the funnel by capping the tip and closing the lid to prevent leaks and the entry of debris.


Additionally, the kit incorporates the Clean Oil Vacuum Regulator adapter (sold separately). Employing the Vacuum Regulator and adapter allows for the installation of AGA's Clean Oil Drain Plug or Adapter Test Block, facilitating a quick and immaculate oil change process.

Show More Show Less

Drive Shaft Holder
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AGA Tools - Corporate Logo
T#:5175755
Part#: AGA-DSH-40
In Stock
6% off MSRP $ 245.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 231.99 USD
Limited Qty Sale
Free Shipping
6% off MSRP
$ 245.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 231.99 USD
Limited Qty Sale
Free Shipping
Now removing the driveshaft can be a single man job!
BMW E60 M5 Crank Case Test Cap
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AGA Tools - Corporate Logo
T#:6924319
Part#: AGA-6061-TC
Ships in 7 Business Days
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping

BMW E60 M5 Crank Case Test Cap

The BMW E60 M5 Crank Case Test Cap is designed to facilitate accurate testing of crankcase pressure across a range of vehicle models. This versatile test cap is compatible with early and late model vehicles equipped with steel, aluminum, or plastic valve covers. Featuring a multi-diameter fitting, it connects directly to IMIBs, handheld manometers, and smoke machines, eliminating the need for adapters and ensuring precise readings without leaks.

Benefits:

  • Versatile Compatibility: Suitable for use with steel, aluminum, and plastic valve covers on early and late model vehicles.
  • Direct Connection: Multi-diameter fitting allows direct connection to IMIBs, handheld manometers, and smoke machines.
  • Leak Prevention: Eliminates the need for adapters, reducing the risk of leaks and inaccurate readings.
  • Enhanced Accuracy: Provides reliable crankcase pressure testing for better diagnostic results.
Show More Show Less

AGA Tools Jack Rod Stand - Standard
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AGA Tools - Corporate Logo
T#:30828076
Part#: AGA-JR-8-14-3.5
Ships in 7 Business Days
$ 109.99 USD
Free Shipping on orders $49 and up
Transform your floor jack into a reliable, stable jack stand with the AGA Jack Rod Stand.

Brake Pressure Bleeder
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AGA Tools - Corporate Logo
T#:5189146
Part#: AGA-BPB-1000
Ships in 7 Business Days
$ 108.99 USD
Free Shipping
$ 108.99 USD
Free Shipping
Make bleeding brakes a one man job!
AGA Axle Puller Kit - BMW MINI
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AGA Tools - Corporate Logo
T#:42638588
Part#: AGA-APIT
Ships in 7 Business Days
$ 497.99 USD
Free Shipping on orders $49 and up
This tool kit is designed to make removing/installing axles easier and prevent damage to the axle boot or dust seals on the axles.
Hex Low Profile Service Sockets
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AGA Tools - Corporate Logo
T#:5175654
Part#: AGA-SS-8-14-K
Ships in 7 Business Days
$ 169.00 USD
Free Shipping
$ 169.00 USD
Free Shipping
Due to minimal clearance, it’s difficult to get a hex socket in the gaps to remove plugs on rear differentials, transfer case and other engine drain/fill plugs.


Brake Bleeder Catch Can
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AGA Tools - Corporate Logo
T#:5175738
Part#: AGA-BPB-CC
Ships in 7 Business Days
$ 23.99 USD
Free Shipping on orders $49 and up
A simple and easy to use catch can for when you bleeder your brakes!
Torque Wrench Adapter
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AGA Tools - Corporate Logo
T#:5189117
Part#: AGA-STA
Ships in 7 Business Days
$ 181.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 169.99 USD
Free Shipping
$ 169.99 USD
Free Shipping
Easily torque your driveshaft to specifications.
Jack Rod Stand
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AGA Tools - Corporate Logo
T#:5175707
Part#: AGA-JR-8-14
Ships in 7 Business Days
$ 109.99 USD
Free Shipping
$ 109.99 USD
Free Shipping
Turn a tradition jack into a jack stand as well.

AGA Tools Slide Hammer
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AGA Tools - Corporate Logo
T#:5269509
Part#: AGA-WLRT-SH
Ships in 7 Business Days
$ 110.99 USD
Free Shipping
$ 110.99 USD
Free Shipping
Easily remove those stubborn bearings or dents from your car.

AGA Tools Oil Drain Plug Repair Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AGA Tools - Corporate Logo
T#:5484733
Part#: AGA-ODP-12-14-K
Ships in 7 Business Days
$ 895.99 USD
Free Shipping
$ 895.99 USD
Free Shipping
Using the AGA Drain Plug Repair Kit will allow you to repair the stripped drain plug without having to remove the oil pan.
APEX EC-7 19x9.5" ET22 Satin Black Wheel 22.9lbs
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201362
Part#: EC71995ET22SMBK
Ships in 5 Business Days
$ 459.00 USD
$ 459.00 USD
19x10" ET25 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Mostly Rear
Size:19x9.5"
Offset (mm):22
Weight (lbs):22.9
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

AGA Tools Jack Rod Stand - Dual Lever
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AGA Tools - Corporate Logo
T#:42638594
Part#: AGA-JR-8-14-DL
Ships in 7 Business Days
$ 139.99 USD
Free Shipping on orders $49 and up
Transform your floor jack into a reliable, stable jack stand with the AGA Dual Lever Jack Rod Stand, a new Jack Rod Stand variant designed for commercial use that will fit most floor jacks.
Valve stem seal pliers
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AGA Tools - Corporate Logo
T#:5189207
Part#: AGA-SRP-N63
Ships in 7 Business Days
$ 113.99 USD
Free Shipping
$ 113.99 USD
Free Shipping
AGA Tools has manufactured custom pliers to make the removal and installation of valve stem seals quick and easy for any engine.

BMW Wheel Lock Removal Tool - Replacement Spline Tool - 556946012 ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AGA Tools - Corporate Logo
T#:24344781
Part#: 55-6946-012-M744
Ships in 7 Business Days
$ 128.99

This product was last offered at the strikethrough price on
01-04-2026

$ 100.99 USD
Free Shipping on orders $49 and up
$ 100.99 USD
Free Shipping on orders $49 and up
Used for wheel lock removal

Performance Clutch Pin - Solid
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AGA Tools - Corporate Logo
T#:5135653
Part#: AGA-CPP-202-659
Ships in 7 Business Days
$ 39.99 USD
Free Shipping on orders $49 and up
An essential upgrade for every manual transmission equipped BMW!
45mm Diameter Magnetic Can Holders
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AGA Tools - Corporate Logo
T#:33446279
Part#: AGA-MCH-45
In Stock
Sale - Save 22% $ 29.99

This product was last offered at the strikethrough price on
05-03-2026

$ 23.30 USD
Free Shipping on orders $49 and up
Sale - Save 22%
$ 29.99

This product was last offered at the strikethrough price on
05-03-2026

$ 23.30 USD
Free Shipping on orders $49 and up

Simplify can storage and transport with AGA Magnetic Can Holders. These holders attach securely to metal surfaces with strong magnets and come in both large (62mm) and small (45mm) sizes. Perfect for service shops or home projects, they help keep your workspace organized and efficient.


Key Features

  • Fits Smaller Cans: 45mm diameter to fit silicone cans, lubricant cans, etc.
  • Color-Coded Clips: Set includes five clips in different colors
  • Strong Magnetic Hold: Ensures secure attachment to metal surfaces
  • Portable and Versatile: Ideal for DIYers and professionals


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less
62mm Diameter Magnetic Can Holders
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AGA Tools - Corporate Logo
T#:33646298
Part#: AGA-MCH-62
In Stock
Sale - Save 22% $ 29.99

This product was last offered at the strikethrough price on
05-03-2026

$ 23.30 USD
Free Shipping on orders $49 and up
Sale - Save 22%
$ 29.99

This product was last offered at the strikethrough price on
05-03-2026

$ 23.30 USD
Free Shipping on orders $49 and up

Simplify can storage and transport with AGA Magnetic Can Holders. These holders attach securely to metal surfaces with strong magnets and come in both large (62mm) and small (45mm) sizes. Perfect for service shops or home projects, they help keep your workspace organized and efficient.


Key Features

  • Fits Larger Cans: 62mm diameter to fit silicone cans, lubricant cans, etc.
  • Color-Coded Clips: Set includes five clips in different colors
  • Strong Magnetic Hold: Ensures secure attachment to metal surfaces
  • Portable and Versatile: Ideal for DIYers and professionals


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less


AGA Tools 1/8" Parts Tether Ratchet
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AGA Tools - Corporate Logo
T#:5484732
Part#: AGA-PTR-2000
Ships in 7 Business Days
$ 34.00 USD
Free Shipping on orders $49 and up
Perfect for brake jobs.
AGA Tools 8HP Park Release Tool
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AGA Tools - Corporate Logo
T#:26404886
Part#: AGA-8HP-PRT
Ships in 7 Business Days
$ 489.00 USD
Free Shipping on orders $49 and up
8HP Transmission Adapter
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AGA Tools - Corporate Logo
T#:5175721
Part#: AGA-8HP-TA
Ships in 7 Business Days
$ 304.99 USD
Free Shipping
$ 304.99 USD
Free Shipping
Securely pull your 8HP Transmission knowing it wont fall.

High-pressure fuel pump supply port caps
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AGA Tools - Corporate Logo
T#:5135636
Part#: AGA-CP-0-14
Ships in 7 Business Days
$ 8.99 USD
Free Shipping on orders $49 and up
Don't let dirt be the reason for bad fuel injectors.

APEX Solid Gloss Black BMW Center Caps - Priced Each
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:639899
Part#: HW-APX-CAP-BLK
Ships in 9 Business Days
$ 9.99 USD
Free Shipping
$ 9.99 USD
Free Shipping
AGA Tools Jack Rod Stand - 3-Wheel Style
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AGA Tools - Corporate Logo
T#:42638593
Part#: AGA-JR-8-14-R
Ships in 7 Business Days
$ 99.99 USD
Free Shipping on orders $49 and up
Transform your floor jack into a reliable, stable jack stand with the AGA Jack Rod Stand.

AGA Tools Jack Rod Stand - XL
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AGA Tools - Corporate Logo
T#:42638595
Part#: AGA-JR-14-24
Ships in 7 Business Days
$ 140.99 USD
Free Shipping on orders $49 and up
Transform your floor jack into a reliable, stable jack stand with the AGA Jack Rod Stand XL.
APEX Wheels Metal Valve Stem - Silver - BMW & MINI
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:593646
Part#: HW-OEM-VALVE-SV
Ships in 2 Business Days
$ 17.00 USD
Free Shipping
$ 17.00 USD
Free Shipping
APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap
Show More Show Less

APEX EC-7 19x9.5" ET22 Anthracite Wheel 22.9lbs
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201364
Part#: EC71995ET22AN
Ships in 5 Business Days
$ 459.00 USD
$ 459.00 USD
19x10" ET25 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Mostly Rear
Size:19x9.5"
Offset (mm):22
Weight (lbs):22.9
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX EC-7 19x10.5" ET22 Anthracite Wheel 23.9lbs
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201376
Part#: EC719105ET22AN
Ships in 5 Business Days
$ 479.00 USD
$ 479.00 USD
19x10.5" ET22 APEX EC-7 Wheel 23.9lbs.
Wheel Specs
Fitment:Front or Rear
Size:19x10.5"
Offset (mm):22
Weight (lbs):23.9
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
APEX EC-7 19x10.5" ET22 Satin Black Wheel 23.9lbs
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201374
Part#: EC719105ET22SMBK
Ships in 5 Business Days
$ 479.00 USD
Free Shipping
$ 479.00 USD
Free Shipping
19x10.5" ET22 APEX EC-7 Wheel 23.9lbs.
Wheel Specs
Fitment:Front or Rear
Size:19x10.5"
Offset (mm):22
Weight (lbs):23.9
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
APEX Wheels Metal Valve Stem - Anthracite - BMW & MINI
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:593645
Part#: HW-OEM-VALVE-GM
Ships in 2 Business Days
$ 15.00 USD
Free Shipping
$ 15.00 USD
Free Shipping
APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap
Show More Show Less


APEX Wheels Metal Valve Stem - Black - BMW & MINI
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:593644
Part#: HW-OEM-VALVE-BK
Ships in 2 Business Days
$ 15.00 USD
Free Shipping on orders $49 and up
APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap
Show More Show Less
APEX EC-7 19x10" ET25 Satin Black Wheel 23.5lbs
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201371
Part#: EC71910ET25SMBK
Ships in 5 Business Days
$ 469.00 USD
Free Shipping
$ 469.00 USD
Free Shipping
19x10" ET25 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Mostly Rear
Size:19x10"
Offset (mm):25
Weight (lbs):23.5
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
Clean Oil Drain Tool
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AGA Tools - Corporate Logo
T#:5135643
Part#: AGA-CODT-1
Ships in 7 Business Days
$ 299.00 USD
Free Shipping
$ 299.00 USD
Free Shipping
Change the way you change oil

AGA XL Lift Table
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AGA Tools - Corporate Logo
T#:38452824
Part#: AGM-LTA-1000
Ships in 7 Business Days
$ 6,949.00 USD
$ 6,949.00 USD

AGA Tools Jack Rod Stand Mount - Standard
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AGA Tools - Corporate Logo
T#:42638591
Part#: AGA-JR-M
Ships in 7 Business Days
$ 29.99 USD
Free Shipping on orders $49 and up
Allows you to mount your Jack Rod Stand to the jack stand handle or any convenient location. The bracket design allows it to be mounted using zip ties or using bolts through the pre-drilled holes.
AGA Tools Jack Rod Stand Mount - XL Mount
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AGA Tools - Corporate Logo
T#:42638592
Part#: AGA-JR-M-XL
Ships in 7 Business Days
$ 29.99 USD
Free Shipping on orders $49 and up
Allows you to mount your Jack Rod Stand XL to the jack stand handle or any convenient location. The bracket design allows it to be mounted using zip ties or using bolts through the pre-drilled holes.
Show More Show Less

APEX EC-7 19x9.5" ET43 Silver Wheel 23lbs
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201357
Part#: EC71995ET43RS
Ships in 5 Business Days
$ 426.00 USD
Free Shipping
$ 426.00 USD
Free Shipping
19x9.5" ET43 APEX EC-7 Wheel 23lbs.
Wheel Specs
Fitment:Mostly Rear
Size:19x9.5"
Offset (mm):43
Weight (lbs):23
Profile:2, moderate dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
AGA Tools Thread Forming Tap - M14 x 1.5
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AGA Tools - Corporate Logo
T#:5484734
Part#: AGA-ODP-TFT-14
Ships in 7 Business Days
$ 88.99 USD
Free Shipping
$ 88.99 USD
Free Shipping
Perfect for stripped threads or cleaning threads.

APEX EC-7 19x9.5" ET33 Anthracite Wheel 22.5lbs
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201361
Part#: EC71995ET33AN
Back Ordered
$ 459.00 USD
Free Shipping
$ 459.00 USD
Free Shipping
19x9.5" ET33 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Front or Rear
Size:19x9.5"
Offset (mm):33
Weight (lbs):22.5
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX EC-7 19x9.5" ET33 Silver Wheel 22.5lbs
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201360
Part#: EC71995ET33RS
Ships in 5 Business Days
$ 459.00 USD
Free Shipping
$ 459.00 USD
Free Shipping
19x9.5" ET33 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Front or Rear
Size:19x9.5"
Offset (mm):33
Weight (lbs):22.5
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
APEX EC-7 19x9.5" ET33 Satin Black Wheel 22.5lbs
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201359
Part#: EC71995ET33SMBK
Ships in 5 Business Days
$ 459.00 USD
Free Shipping
$ 459.00 USD
Free Shipping
19x9.5" ET33 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Front or Rear
Size:19x9.5"
Offset (mm):33
Weight (lbs):22.5
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less