BMW Suspension Parts for BMW 7 Series E23 (1978-1987)

Clear BMW chassis

Please ensure your correct model is selected

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

Turner Motorsport - Corporate Logo
T#:51602388
Part#: 044910LA02KT
In Stock
New Item
$ 245.99 USD
Free Shipping
$ 245.99 USD
Free Shipping

Lowering your BMW does wonders for appearance and handling, but it also changes suspension geometry in ways that can hurt performance. As ride height changes, angles between the sway bar, control arms, and axles shift, which can cause binding, poor fitment, and added stress on the factory fixed-length end links. This is especially noticeable on cars equipped with coilover suspension, where slight height differences side to side can preload the sway bar and lead to inconsistent handling.

Our team of dedicated BMW enthusiasts set out to address this common issue with Adjustable Rear Sway Bar End Links. Designed with performance in mind, they offer a fully adjustable range from 100mm to 120mm, helping eliminate preload, restore proper suspension alignment, and improve overall sway bar function. Constructed from high-quality billet aluminum, these end links are built to outlast the factory cast components and are finished with a black anodized coating for excellent corrosion resistance. Laser-etched wrench size markings allow for quick, easy adjustments while installed on the vehicle. Unlike the factory design, these end links use spherical rod ends at the control arm for increased responsiveness and a more direct handling feel. These end links feature a bolt-through bushing design, which is compatible with most adjustable aftermarket sway bars. Mounting hardware is included for easy installation.

Features & Benefits:

Adjustable from 100mm to 120mm Strong 6061-T6 billet aluminum construction Black anodized finish resists corrosion Spherical rod ends improve response and handling feel Polyurethane bushing with knurled bore helps retain grease Fits most aftermarket sway bars with bolt-through attachment Laser-etched markings for quick and easy adjustments

Show More Show Less
KMAC - Corporate Logo
T#:389654
Part#: 193316-1J
Special Order: No Guaranteed ETA
$ 379.99 USD
Free Shipping
$ 379.99 USD
Free Shipping
Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
1984-1991  E30 BMW  318i 318is 318ic 325e 325es 325i 325ic 325is M3
1982-1988  E28 BMW  528e 533i 535i 535is M5
1993-1995  E34 BMW  525i
1982-1989  E24 BMW  633csi 635csi M6
Show More Show Less
Turner Motorsport - Corporate Logo
T#:51602382
Part#: 044910LA01KT
In Stock
New Item
Sale - Save 10% $ 245.99

This product was last offered at the strikethrough price on
06-14-2026

$ 221.39 USD
Free Shipping
Sale - Save 10%
$ 245.99

This product was last offered at the strikethrough price on
06-14-2026

$ 221.39 USD
Free Shipping

Lowering your BMW does wonders for appearance and handling, but it also changes suspension geometry in ways that can hurt performance. As ride height changes, angles between the sway bar, control arms, and axles shift, which can cause binding, poor fitment, and added stress on the factory fixed-length end links. This is especially noticeable on cars equipped with coilover suspension, where slight height differences side to side can preload the sway bar and lead to inconsistent handling.

Our team of dedicated BMW enthusiasts set out to remedy this common issue with a set of Adjustable Rear Sway Bar End Links. Designed with performance in mind, they offer a fully adjustable range from 100mm to 120mm, helping eliminate preload, restore proper suspension alignment, and improve overall sway bar function. Constructed from high-quality billet aluminum, these end links are built to outlast the factory cast components and are finished with a black anodized coating for excellent corrosion resistance. Laser-etched wrench size markings allow for quick, easy adjustments while installed on the vehicle. Unlike the factory design, these end links use spherical rod ends at the control arm for increased responsiveness and a more direct handling feel. A unique knurled bushing design also ensures compatibility with the OEM sway bar, offering a first-to-market solution for enthusiasts looking to retain factory components.

Features & Benefits:

Adjustable from 100mm to 120mm Strong 6061-T6 billet aluminum construction Black anodized finish resists corrosion Spherical rod ends improve response and handling feel Polyurethane bushing with knurled bore helps retain grease Fits factory rear sway bars on E23, E24, E28, E30, and E36 Laser-etched markings for quick and easy adjustments

Show More Show Less

KMAC - Corporate Logo
T#:582353
Part#: 192026G
In Stock
$ 320.00 USD
Free Shipping
$ 320.00 USD
Free Shipping

KMAC - Corporate Logo
T#:3546
Part#: 193326
Special Order: No Guaranteed ETA
$ 269.95 USD
Free Shipping
$ 269.95 USD
Free Shipping
Perfect for lowered cars that need to dial out negative camber to preserve tires. Also perfect for track cars - easily dial in toe and camber for the track for better handling. Priced per set.

Fits the following BMW:
E23 BMW 7 series
83-89 E24 BMW 6 series
82-88 E28 BMW 5 series
E32 BMW  7 series
E34 BMW  5series
Show More Show Less
Turner Motorsport - Corporate Logo
T#:340477
Part#: TSU998062A
Ships on Jan 26, 2027
Sale - Save 25% $ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD
Free Shipping
Sale - Save 25%
$ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD
Free Shipping
These aluminum upper spring hats are for coil over struts with a 2.25" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.
Show More Show Less

Turner Motorsport - Corporate Logo
T#:340476
Part#: TSU9980548
Ships on Jan 26, 2027
Sale - Save 25% $ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD
Free Shipping
Sale - Save 25%
$ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD
Free Shipping
These aluminum upper spring hats are for coil over struts with a 2.25" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.
Show More Show Less
Rod End Boot (14-18mm) - Priced Each
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:599632
Part#: RERS3
In Stock
Sale - Save 46% $ 27.99

This product was last offered at the strikethrough price on
03-27-2026

$ 15.00 USD
Free Shipping on orders $49 and up
Sale - Save 46%
$ 27.99

This product was last offered at the strikethrough price on
03-27-2026

$ 15.00 USD
Free Shipping on orders $49 and up
Extend the life of your heim joints with this flexible rubber protective boot. Designed to fit 14mm–18mm spherical bearings and rod ends, it shields critical components from dirt, moisture, and road debris. Keeping contaminants out helps ensure consistent performance and reduces wear over time.
Show More Show Less

Rein End Link Bushing - E10, E12, E21, E23, E24, E3, E9
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:379649
Part#: 31351125712
Ships in 3 Business Days
$ 6.99 USD
Free Shipping on orders $49 and up
Rubber bushing for sway bar end links

KMAC - Corporate Logo
T#:389656
Part#: 193316-3L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Track, Stage 3
Bearing: PTFE-lined pillow-ball, no bushing

KMAC Stage 3 camber/caster plates are designed for track or race-only situations where comfort and noise are not the primary concerns. The Stage 3 camber plates use a pillowball bearing, solidly mounted within the camber plate for direct alignment of the strut shaft and no excess play or deflection. Stage 3 are designed to increase negative camber with their patented 'floating' adjustment that changes camber and caster together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Fitment is limited to race-only small diameter coil-over springs (not stock-type). Bearing inserts and adapters included. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
1984-1991  E30 BMW  318i 318is 318ic 325e 325es 325i 325ic 325is M3
1982-1988  E28 BMW  528e 533i 535i 535is M5
1993-1995  E34 BMW  525i
1982-1989  E24 BMW  633csi 635csi M6
Show More Show Less