BMW 5 Series E28 (1982-1988)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

JB Racing - Corporate Logo
T#:3770
Part#: 520-080-240
Ships in 9 Business Days
$ 630.00 USD
Free Shipping
$ 630.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

Stock Flywheel Weight = 22.0lbs
JB Flywheel Weight = 8.5lbs

This flywheel includes the ignition trigger wheel.

This item fits the following BMWs:
1982-1987 E23 BMW 733i 735i
1982-1989 E24 BMW 633csi 635csi M6
1985-1988 E28 BMW 535i 535is M5
Show More Show Less
KMAC - Corporate Logo
T#:389654
Part#: 193316-1J
Special Order: No Guaranteed ETA
$ 379.99 USD
Free Shipping
$ 379.99 USD
Free Shipping
Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
1984-1991  E30 BMW  318i 318is 318ic 325e 325es 325i 325ic 325is M3
1982-1988  E28 BMW  528e 533i 535i 535is M5
1993-1995  E34 BMW  525i
1982-1989  E24 BMW  633csi 635csi M6
Show More Show Less
Black Forest Industries - Corporate Logo
T#:391722
Part#: GS2B
In Stock
Starting at $ 184.99 USD
Free Shipping
Starting at $ 184.99 USD
Free Shipping

This weighted shift knob makes shifts faster and the extra-large globe shape encourages over-palm shifting. The Black Forest Industries Billet Knob weighs in at 8.8oz (250g), about twice as much as a stock knob and a little heaver than the BMW ZHP knob. The heavier knob amplifies the pendulum motion of the shift lever resulting in smoother and faster shift times. BFI has designed this knob for BMW and VW fitments to fit snug on the shift lever and be secured with Allen set screws. They were careful to reduce tolerances compared to universal knobs. The overall height of the BFI knob is the same as stock anatomic knobs (some BMW M/Performance models have a stock knob that is shorter than this one).

Included with the BFI Billet knob is a matching BFI crest shift emblem. A 5 or 6-speed pattern emblem is available separately.

Choose from soft alcantara or perforated air leather with either a silver or black anodized base.

Show More Show Less

Sunex - Corporate Logo
T#:641915
Part#: 8845D
Ships in 7 Business Days
$ 141.99 USD
Free Shipping
$ 141.99 USD
Free Shipping
Complete set of spark plug sockets.

KMAC - Corporate Logo
T#:582353
Part#: 192026G
In Stock
$ 320.00 USD
Free Shipping
$ 320.00 USD
Free Shipping
Sunex - Corporate Logo
T#:642035
Part#: 9914A
Ships on Sep 28, 2026
$ 113.91 USD
Free Shipping
$ 113.91 USD
Free Shipping
Radius V-Groove design creates an anti-slip while also preventing round-off.

Sunex - Corporate Logo
T#:5282862
Part#: 2850
Back Ordered
11% off MSRP $ 135.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 119.99 USD
Free Shipping
11% off MSRP
$ 135.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 119.99 USD
Free Shipping
Easily removes vacuum switches, oil pressure sending units, brake light switches, and oxygen sensors on most car models
KMAC - Corporate Logo
T#:3546
Part#: 193326
Special Order: No Guaranteed ETA
$ 269.95 USD
Free Shipping
$ 269.95 USD
Free Shipping
Perfect for lowered cars that need to dial out negative camber to preserve tires. Also perfect for track cars - easily dial in toe and camber for the track for better handling. Priced per set.

Fits the following BMW:
E23 BMW 7 series
83-89 E24 BMW 6 series
82-88 E28 BMW 5 series
E32 BMW  7 series
E34 BMW  5series
Show More Show Less

Sunex - Corporate Logo
T#:2498418
Part#: 3911D
Ships on Sep 28, 2026
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
This set covers 8 different functions

Sunex - Corporate Logo
T#:5229429
Part#: 910MTAS
Ships on Sep 28, 2026
$ 154.99 USD
Free Shipping
$ 154.99 USD
Free Shipping
Used with a torque wrench to access obstructed fasteners
Sunex - Corporate Logo
T#:2528142
Part#: SX113D
Ships on Sep 28, 2026
$ 59.99 USD
Free Shipping
$ 59.99 USD
Free Shipping
With great comfort and design the air ratchet wrench is the perfect tool
Sunex - Corporate Logo
T#:2750699
Part#: 9914MA
Ships on Sep 28, 2026
$ 107.39 USD
Free Shipping
$ 107.39 USD
Free Shipping
Fully polished drop forged CR-V alloy steel for maximum strength and service life


KMAC - Corporate Logo
T#:389656
Part#: 193316-3L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Track, Stage 3
Bearing: PTFE-lined pillow-ball, no bushing

KMAC Stage 3 camber/caster plates are designed for track or race-only situations where comfort and noise are not the primary concerns. The Stage 3 camber plates use a pillowball bearing, solidly mounted within the camber plate for direct alignment of the strut shaft and no excess play or deflection. Stage 3 are designed to increase negative camber with their patented 'floating' adjustment that changes camber and caster together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Fitment is limited to race-only small diameter coil-over springs (not stock-type). Bearing inserts and adapters included. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
1984-1991  E30 BMW  318i 318is 318ic 325e 325es 325i 325ic 325is M3
1982-1988  E28 BMW  528e 533i 535i 535is M5
1993-1995  E34 BMW  525i
1982-1989  E24 BMW  633csi 635csi M6
Show More Show Less