Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Please ensure your correct model is selected
Upgrade to wheel studs from bolts for an enhanced connection and easier wheel installation. Racing entities often require wheel studs for better wheel-to-hub contact, offering improved confidence during high-speed performance. Turner Motorsport's wheel studs are designed to accommodate various spacer widths effortlessly, simplifying the setup process. Discover why this switch from bolts to studs can make a significant difference:
This suspension package of Bilstein Sport shocks and H&R Sport springs will lower the ride height and firm up the suspension to provide less bodyroll and better handling. This E24 and E28 suspension package is firm but not harsh and can be used on daily-driven street cars as well as backroad and weekend corner carvers.
H&R Sport springs lower the ride height by 1.25" and stiffens the spring rate. Both combine to lower the car's center of gravity and reduce the amount of bodyroll in corners. The springs are progressive rate so their initial stiffness is actually very compliant and it becomes stiffer as the spring is compressed. This is great for street cars that see bumps and potholes where suspension compliance is key. Overall, they are about 40% stiffer than the stock original springs. The ride quality is a little stiffer than a stock E28 M5.
We use Bilstein Sport shocks as the dampers and they feature Bilstein's patented and innovative valving system. With this system, small bumps and impacts are absorbed as they should be. But the shocks stiffen for cornering and other suspension motions. It's the best of both worlds as the shock self-adjusts based on suspension motion. These fit with the stock strut and shock mounts, making for an easy and clean install.
Although this suspension is listed for the E28 M5 and E24 M6, the original rear self-leveling system must be disabled or removed.
Parts list:
This item fits the following BMWs:
1982-1988 E28 BMW 528e 533i 535i 535is M5
1982-1989 E24 BMW 633csi 635csi M6
Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles. Included in this kit are high quality Red Line D4 ATF fluid and OEM filters, seals, and plugs.
Fits the following BMWs:
1978-1987 E23 BMW 733i 735i
1977-1989 E24 BMW 633CSi 635CSi
1982-1988 E28 BMW 528e 533i 535i/is
1984-1991 E30 BMW 318i/is 325i/is/ix 325e/es
Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication! Select your vehicle to make sure you are viewing the best Liqui Moly options for your application.
Includes:
Liqui Moly Molygen New Generation fully synthetic engine oil is carefully engineered, starting with a high quality synthetic base. What separates Molygen from other engine oils is the molecular friction modifier for reduced friction and wear. Because of this, Molygen glows fluorescent green under UV light, allowing you to easily find any leaks!
New generation engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth running gasoline and diesel engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, turbo and multi-valve compatibility, and long service life.
Properties:
Approved for the following specifications:
Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.
E30 M3 Front Hub Assembly w/bearing. This bearing requires that you use your existing ABS ring. This is a simple press fit. This is an OEM Wheel Bearing Hub Assemblies made by FAG. GSP and FAG are the leaders in wheel bearing technology. These wheel hubs are the best you can buy. Alternate part number 31212225362.
FAG is an OE supplier to BMW as well as several other German marques.
GSP is a high-quality supplier for aftermarket suspension components. They have quickly position themselves as an industry leader, and pride themselves on offering high-quality alternatives to their expensive OEM counterparts.
This hub uses the ABS ring from the E28 5-series. For the E30 M3 the original ABS ring will need to be removed and installed on the new hub.
Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.
To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!
See kit contents below for a complete list of included components.
A well-known issue in BMW models is the water pump, which typically requires servicing every 60,000 miles. To ensure your vehicle's cooling system remains in peak condition, it's also advisable to replace the thermostat during this maintenance. Thankfully, Turner Motorsport has streamlined this process by combining all the necessary parts into one convenient kit.
If you're aiming to maintain and boost your BMW's cooling system, look no further than this premium kit, expertly assembled by the enthusiasts at Turner Motorsport!
Restore your BMW's braking system to its original performance with this Packaged by Turner OE Rear Brake Service Kit. Expertly crafted for precise fitment and dependable performance, this kit contains everything needed for a complete rear brake overhaul, ensuring maximum braking efficiency and safety.
Top Features:
Comprehensive Package: Includes premium brake pads, rotors, and all required hardware for a thorough rear brake service.
OE Specification: Built to original equipment standards for perfect compatibility and exceptional performance.
High-Quality Materials: Made from robust materials designed to endure high temperatures and reduce wear, guaranteeing long-lasting brake functionality.
Improved Safety: Engineered to deliver consistent and powerful stopping power, enhancing overall vehicle safety and control.
User-Friendly Installation: Comes with all necessary components for a smooth and easy installation process.
Advantages:
Revitalizes Braking Performance: Upgrading worn-out parts with OE-standard components ensures your braking system operates at peak efficiency.
Dependable Operation: Each part is precisely manufactured to meet or surpass original equipment specifications.
Economical Maintenance: This all-inclusive kit provides a cost-effective solution for maintaining your vehicle’s brake system.
Gain assurance with unmatched stopping power and reliability. Essential for preserving your vehicle's safety and performance, this kit is a must-have for any BMW owner's maintenance routine.
For a detailed list of included components, please refer to the "Kit Contents" tab.
Restore your BMW's braking system to its original performance with this Packaged by Turner OE Front Brake Service Kit. Expertly crafted for precise fitment and dependable performance, this kit contains everything needed for a complete front brake overhaul, ensuring maximum braking efficiency and safety.
Top Features:
Comprehensive Package: Includes premium brake pads, rotors, and all required hardware for a thorough front brake service.
OE Specification: Built to original equipment standards for perfect compatibility and exceptional performance.
High-Quality Materials: Made from robust materials designed to endure high temperatures and reduce wear, guaranteeing long-lasting brake functionality.
Improved Safety: Engineered to deliver consistent and powerful stopping power, enhancing overall vehicle safety and control.
User-Friendly Installation: Comes with all necessary components for a smooth and easy installation process.
Advantages:
Revitalizes Braking Performance: Upgrading worn-out parts with OE-standard components ensures your braking system operates at peak efficiency.
Dependable Operation: Each part is precisely manufactured to meet or surpass original equipment specifications.
Economical Maintenance: This all-inclusive kit provides a cost-effective solution for maintaining your vehicle’s brake system.
Gain assurance with unmatched stopping power and reliability. Essential for preserving your vehicle's safety and performance, this kit is a must-have for any BMW owner's maintenance routine.
For a detailed list of included components, please refer to the "Kit Contents" tab.
| Brake Package FAQ |
| Brake Pad Buying Guide |
| Brake Rotor Buying Guide |