BMW 5 Series E28 (1982-1988)

The 2.7 liter inline-6 is a torquey car, however, performance drops off greatly after 4000 RPM. With a Turner Performance Chip power is boosted at all RPM but most importantly in the upper RPM. The car really feels more alive! This chip was tuned on the dyno to yield as much performance from this engine as possible and still maintain its strength and durability. Jim Conforti tuned the fuel and park maps to take advantage of 91 octane gasoline. By making the engine more efficient with this fuel, gains in horsepower and torque are achieved as well as making the engine run smoother.

Turner Performance Chips provide the ultimate in performance advantage! Adding a performance chip to your BMW is the easiest and most cost effective way of increasing BMW power, torque, and performance with NO DOWNSIDES. Through years of BMW performance tuning, we are able to maximize power and torque gains for 91 octane fuel used in North America. By making changes in the ignition and fuel maps of the DME we are able to optimize performance with no side effects or compromises. Other changes will make your BMW smoother and more responsive than when it left the factory. Our chips have a lifetime warranty and a 30-day satisfaction guarantee. If for any reason you are not fully satisfied with the increase in power and overall drivability you can return the chip to Turner Motorsport for a full refund. Chips are supplied with detailed instructions and are user-installed in about an hour. See below for specific information that we may need from your BMW model.

Horsepower Gain +24 @ 4,500 RPM

Torque Gain: +28 @ 4,500 RPM

New Rev Limit: 5,300 RPM

NOTE: your car may have a replacement DME ending in 021. Our chips will work in this replacement computer as long as the existing chip is not soldered.

This item fits the following BMWs:
1985-1987 E30 BMW 325e 325es
1985-1987 E28 BMW 528e with build date of 09/1984 up to 09/1987

When the first M5 and M6 were brought to the U.S. they were de-tuned from their European brothers and sisters. That was a shame as the cars lost close to 40hp. But adding a Turner Performance Chip will get that lost horsepower back! Jim Conforti tuned these chips on the dyno to boost mid range torque and increase horsepower in the upper RPM range. As a result there is a 48 horsepower increase at 6000 RPM with a new rev limit of 7200 RPM! Conforti achieved this by tuning the car on the dyno, specifically changing the fuel and spark patterns in an effort to make the engine more efficient when burning 91+ octane fuel. Torque increases similarly in the heart of the powerband.

Turner Performance Chips provide the ultimate in performance advantage! Adding a performance chip to your BMW is the easiest and most cost effective way of increasing BMW power, torque, and performance with NO DOWNSIDES. Through years of BMW performance tuning, we are able to maximize power and torque gains for 91 octane fuel used in North America. By making changes in the ignition and fuel maps of the DME we are able to optimize performance with no side effects or compromises. Other changes will make your BMW smoother and more responsive than when it left the factory. Our chips have a lifetime warranty and a 30-day satisfaction guarantee. If for any reason you are not fully satisfied with the increase in power and overall drivability you can return the chip to Turner Motorsport for a full refund. Chips are supplied with detailed instructions and are user-installed in about an hour.
 

Horsepower Gain:+48 @ 6,000 RPM

Torque Gain:+32 @ 5,000 RPM

New Rev Limit7,200 RPM

This item fits the following BMWs:
1988 E28 BMW M5
1987-1989 E24 BMW M6