BMW Brakes & Brake Parts for BMW 3 Series E30 (1984-1991)

When swapping an M5X engine into your E30, interference between the intake manifold and brake booster-mounted reservoir is a common problem. Tighter clearance necessitates the use of a different brake booster, which means the brake fluid reservoir will need to be retrofitted or relocated. This is particularly difficult when using the larger, dual-diaphragm brake booster from an E32 or E34.

To solve this issue, we've designed a clean, OE-style solution that requires zero fabrication. Our stainless steel bracket relocates the brake fluid reservoir to the original, left-hand strut tower location, once used for mounting the M20's power steering fluid reservoir. This provides the clearance necessary for fitting an M50/S50, M52/S52, M54, or S54 in the engine bay of your E30.

Designed with the DIY E30 24V swap community in mind, our design delivers factory-quality fit and finish with none of the guesswork.

FEATURES

Brushed stainless steel bracket for corrosion resistance and durability Yellow zinc-plated hardware to match the original Genuine BMW fasteners Compatible with the ATE remote reservoir found on E10 2002 models (part number 34321112399) KIT CONTENTS

Turner Motorsport Brake Fluid Reservoir Bracket & Installation Hardware ATE Remote Brake Fluid Reservoir Genuine BMW Connecting Pipe Remote Reservoir Hose PRODUCT DEVELOPMENT

Our 24V Swap Brake Fluid Reservoir Bracket was designed, engineered, tested, and quality inspected by our Research and Development team in our Wadsworth, Ohio, facility. We strive for the highest level of precision and quality through leading-edge product development technology, including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

When swapping an M5X engine into your E30, interference between the intake manifold and brake booster-mounted reservoir is a common problem. Tighter clearance necessitates the use of a different brake booster, which means the brake fluid reservoir will need to be retrofitted or relocated. This is particularly difficult when using the larger, dual-diaphragm brake booster from an E32 or E34.

To solve this issue, we've designed a clean, OE-style solution that requires zero fabrication. Our stainless steel bracket relocates the brake fluid reservoir to the original, left-hand strut tower location, once used for mounting the M20's power steering fluid reservoir. This provides the clearance necessary for fitting an M50/S50, M52/S52, M54, or S54 in the engine bay of your E30.

Designed with the DIY E30 24V swap community in mind, our design delivers factory-quality fit and finish with none of the guesswork.

Looking for a complete kit that includes the brake fluid reservoir, hose, and other mounting components? See T#48642684.

FEATURES

Brushed stainless steel bracket for corrosion resistance and durability Yellow zinc-plated hardware to match the original Genuine BMW fasteners Compatible with the ATE remote reservoir found on E10 2002 models (part number 34321112399) PRODUCT DEVELOPMENT

Our 24V Swap Brake Fluid Reservoir Bracket was designed, engineered, tested, and quality inspected by our Research and Development team in our Wadsworth, Ohio, facility. We strive for the highest level of precision and quality through leading-edge product development technology, including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this E30 BMW brake package are all of the OEM equivalent components needed to replace your Front brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

• Pagid Front Brake Pads
• Zimmerman Front Rotors
• New Front Wear Sensors
• Brand New Stainless Steel Set Screws
• Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
E30 BMW M3

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this E30 BMW brake package are all of the OEM equivalent components needed to replace your Front brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

• Pagid Front Brake Pads
• Zimmerman Front Rotors
• New Front Wear Sensors
• Brand New Stainless Steel Set Screws
• Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
E30 BMW 318i/is 325e/es/i/is/ix

Ceramic Brake pads have advanced a great amount and show drastic advantages over traditional metallic and semi-metallic brake pads. Akebono in particular has been producing brake pads for major brands for years and their Euro brake pads have seen use in over 90 models of vehicles as the OE brake pads, ensuring high, consistent quality.

Thanks to Akebono’s pad formulation, you can enjoy many benefits including:

• Reduced Heat Absorption
• Reduced Brake Fade
• Reduced Stopping Distances
• Significantly Less Brake Dust
• Increased Brake Rotor Life

This item fits the following BMWs:

1999-2002 Z3 BMW

1995-1999 E36 BMW M3

1984-1995 E34 BMW 525i 530i 535i 540i M5

1988-1991 E30 BMW M3

1988-1994 E32 BMW 740i/iL 750iL