BMW Drivetrain Parts for BMW 3 Series E30 (1984-1991)

Getrag 260 Transmission To Engine Mounting Hardware Kit

T#:30197962

Part#: G260MTHWKTTKT

Ships in 1 day

$ 97.99 USD

Add to Wish List

Qty

$ 97.99 USD

Add to Wish List

All new hardware for installing your G260 on an M20 motor, including new dowels and 10mm bolt that goes from the engine side into the transmission.

Whether your refreshing the transmission, doing the clutch and flywheel or doing a manual swap get a new set of hardware for piece of mind and many more service intervals.

Kit Contents:

M12x45 Torx bolt - 23001222890 (QTY2)
M12x75 Torx bolt - 23001222893 (QTY2)
Washer - 07119906063 (QTY 4)
Dowel - 11117524470 (QTY2)
M8x50 ASA Bolt - 23001222887 (QTY 4)
Wave Washer - 07119904115 (QTY 4)
M6x16 Hex Bolt - 07119913015 (QTY 1)
M10x65 Torx Bolt - 07129904681 (QTY2)
Wave Washer - 07119904463 (QTY2)
Hex Nut - 07129904865 (QTY2)

Show More Show Less

Manual Transmission Service Kit - BMW E30 Non-M & M3

T#:30960425

Part#: TMSE30M3TSKT

In Stock

$ 109.99 USD

Add to Wish List

Qty

$ 109.99 USD

Add to Wish List

The oil in your manual transmission is extremely vital to the life of your transmission. Over time it will begin to break down, lose viscosity, and begin to allow excess heat and friction. This kit is the perfect remedy to this problem. Included are 2 quarts of Redline MTL 75w-80 transmission fluid, which features a fully synthetic base for better protection and wear resistance, and Genuine BMW fill and drain plugs.

Show More Show Less

Rear Differential Service Kit for various BMW Models

T#:42133544

Part#: 835225790TKT

In Stock

Sale - Save 2% $ 60.99

This product was last offered at the strikethrough price on
08-04-2026

$ 59.72 USD

Add to Wish List

Qty

Sale - Save 2%

$ 60.99

This product was last offered at the strikethrough price on
08-04-2026

$ 59.72 USD

Add to Wish List

The kit includes 2 Quarts of Red line 75w90 - 57904 and brand new Rein rear diff oil drain plug M22x1.5

HD/Race Rigid 6 Pad

T#:14221793

Part#: BM17-HDR6

In Stock at Vendor

$ 820.00 USD

Add to Wish List

Qty

$ 820.00 USD

Add to Wish List

BM13-HDR6 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 6-pad spring-centered race disc features a spring-center to properly damp torsional vibrations for quieter operation and resist failure even under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 6-pad spring-centered race disc, engagement is harsher, but shifting is faster. ACT's 6-pad spring-centered race disc is well-suited for smaller disc sizes in smaller engines.

Show More Show Less

JB Racing Lightweight Aluminum Flywheel & Clutch Kit

T#:15777312

Part#: 520-040-215-KT

Back Ordered

$ 1,003.99

This product was last offered at the strikethrough price on
05-07-2026

$ 994.99 USD

Add to Wish List

Qty

$ 994.99 USD

Add to Wish List

A lightweight aluminum flywheel is a great way to increase throttle response and free up horsepower by reducing drivetrain loss. Factory flywheels are built to minimize engine and transmission vibrations, making them heavier and requiring more energy to make them spin. An aluminum flywheel can save lots of weight over the stock steel unit - sometimes over 50%. While the dampening effect of the stock flywheel is reduced, most enthusiasts would agree that the increase in performance is well worth it. In addition, the lighter flywheel allows the engine to spin more freely, improving throttle response. This JB Racing lightweight aluminum flywheel kit and is designed to be used with the included factory clutch, making replacement and service easy and inexpensive, especially compared to specialized racing clutches. It also preserves the driveability of your car on the street, and enthusiasts tolerant of a mild to moderate NVH increase will be especially taken with this setup. In addition, the JB Racing flywheel can be easily rebuilt with a new clutch contact surface, allowing you to enjoy faster revs and superior response for many years to come. Stock Flywheel Weight: 27 lbs. JB Racing Lightweight Aluminum Flywheel: 9 lbs.

Show More Show Less

Shifter Rebuild Kit - E30

T#:13430833

Part#: E30SHIFTREBUILKT

Ships in 1 day

$ 211.99 USD

Add to Wish List

Qty

$ 211.99 USD

Add to Wish List

Everything you need to refresh your shifter! Our team of dedicated BMW experts is at your service! We took the guess work out of rebuilding the shifter for your E30.

Getrag 260 Transmission Seal Kit

T#:29898446

Part#: G260SEALKT

Ships in 1 Business Day

Sale - Save 25% $ 20.99

This product was last offered at the strikethrough price on
04-10-2026

$ 15.70 USD

Add to Wish List

Qty

Sale - Save 25%

$ 20.99

This product was last offered at the strikethrough price on
04-10-2026

$ 15.70 USD

Add to Wish List

Includes input, output, and selector rod seals. Great for servicing your transmission during a clutch and flywheel job.

OEM Lemforder Rubber Transmission Mount - 22316799330 - E30 E36 E84 E...

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:397937

Part#: 22316799330

In Stock

$ 10.99

This product was last offered at the strikethrough price on
05-03-2026

$ 9.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 10.99

This product was last offered at the strikethrough price on
05-03-2026

$ 9.99 USD

Limited Qty Sale

Add to Wish List

Lemforder BMW Rubber Mounting

Lemforder is a supplier of parts directly to BMW and other major automotive manufacturers. In order to save on the cost of parts, we are able to provide you these parts directly from Lemforder at a much lower cost than if bought directly from BMW. These parts have the same high quality and reliability, just without the BMW logos.

This item fits the following BMW Chassis:
E30,E36,E84, E89 Z4

Show More Show Less

Universal Short Shifter V3 - Self Centering - Black Reverse Button Wi...

T#:55317707

Part#: IRPUSSKT2

In Stock

$ 528.99 USD

Add to Wish List

Qty

$ 528.99 USD

Add to Wish List

Stop guessing where the gate is. Upgrade your connection to the machine and drive your BMW the way it was meant to be driven.

Bavarian Autosport Hub Adapter With Hub Puller Slide Hammer Adapter A...

T#:56254753

Part#: B8800120KT2

In Stock

$ 177.99 USD

Add to Wish List

Qty

$ 177.99 USD

Add to Wish List

Combining a heavy duty hub adapter with dedicated slide hammer and impact force screw attachments, this kit is built for serious mechanics and track day drivers who need unyielding strength to get the job done right the first time.

Show More Show Less

HD/Race Rigid 6 Pad

T#:14221788

Part#: BM13-HDR6

In Stock at Vendor

$ 1,554.00 USD

Add to Wish List

Qty

$ 1,554.00 USD

Add to Wish List

BM13-HDR6 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 6-pad spring-centered race disc features a spring-center to properly damp torsional vibrations for quieter operation and resist failure even under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 6-pad spring-centered race disc, engagement is harsher, but shifting is faster. ACT's 6-pad spring-centered race disc is well-suited for smaller disc sizes in smaller engines.

Show More Show Less

HD/Perf Street Sprung

T#:14221789

Part#: BM13-HDSS

Ships in 2 Business Days

$ 1,588.00 USD

Add to Wish List

Qty

$ 1,588.00 USD

Add to Wish List

This kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability.

Show More Show Less

HD/Race Sprung 6 Pad

T#:14221780

Part#: BM13-HDG6

In Stock at Vendor

$ 1,607.00 USD

Add to Wish List

Qty

$ 1,607.00 USD

Add to Wish List

BM13-HDG6 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 6-pad spring-centered race disc features a spring-center to properly damp torsional vibrations for quieter operation and resist failure even under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 6-pad spring-centered race disc, engagement is harsher, but shifting is faster. ACT's 6-pad spring-centered race disc is well-suited for smaller disc sizes in smaller engines.

Show More Show Less

HD/Race Sprung 4 Pad

T#:14221778

Part#: BM12-HDG4

Ships in 6 Business Days

$ 1,559.00 USD

Add to Wish List

Qty

$ 1,559.00 USD

Add to Wish List

BM12-HDG4 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 4-pad spring-centered race disc features a spring-center to properly damp torsional vibrations for quieter operation and resist failure even under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 4-pad spring-centered race disc, engagement is harsher, but shifting is faster. ACT's 4-pad spring-centered race disc is well-suited for smaller disc sizes in smaller engines.

Show More Show Less

HD/Race Rigid 4 Pad

T#:14221783

Part#: BM13-HDR4

In Stock at Vendor

$ 1,535.00 USD

Add to Wish List

Qty

$ 1,535.00 USD

Add to Wish List

BM13-HDR4 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 4-pad spring-centered race disc features a spring-center to properly damp torsional vibrations for quieter operation and resist failure even under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 4-pad spring-centered race disc, engagement is harsher, but shifting is faster. ACT's 4-pad spring-centered race disc is well-suited for smaller disc sizes in smaller engines.

Show More Show Less

HD/Race Sprung 4 Pad

T#:14221779

Part#: BM13-HDG4

In Stock at Vendor

$ 1,599.00 USD

Add to Wish List

Qty

$ 1,599.00 USD

Add to Wish List

BM13-HDG4 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 4-pad spring-centered race disc features a spring-center to properly damp torsional vibrations for quieter operation and resist failure even under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 4-pad spring-centered race disc, engagement is harsher, but shifting is faster. ACT's 4-pad spring-centered race disc is well-suited for smaller disc sizes in smaller engines.

Show More Show Less