This braided stainless steel line replaces the stock hydraulic hose connecting your clutch slave cylinder to the clutch master cylinder. There are several deficiences with rubber, especially as it ages - when new the rubber expands and swells under pressure and the pedal can feel spongy. As rubber ages and is exposed to extreme temperatures the rubber can harden and even shrink (common on brake hoses), which results in a stiff pedal. Rubber clutch lines do not stand up to the stresses of hard use. ECS Exact-Fit stainless reinforced clutch lines provide more confident and dependable shifting by maintaining consistent line pressure, long lasting corrosion resistance, and increased protection from failure. These lines are reinforced with braided stainless steel mesh, affording superior expansion resistance. This resistance to expansion creates a firmer pedal, and a more direct clutch pedal feel. The signature red polymer coating provides additional protection from the elements and abrasion.

This particular stainless steel clutch line fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1988 E28 BMW M5
1987-1989 E24 BMW M6 

As your E30 ages, the rear differential bushing can crack, dry rot, and split. It's time for an upgrade. The ECS Tuning Heavy Duty Differential Bushing is crafted with performance in mind. Instead of using polyurethane, which is known for increasing NVH, the enthusiasts at ECS chose HD 70D rubber. This material offers a close-to-factory feel without the excess deflection of softer bushings, ensuring a pleasurable driving experience free from differential whine and excess movement.

Features & Benefits:

Eliminates Weak OEM Mount: The aging E30 chassis deserves an upgrade. Replace your old, cracked, and worn factory bushing with this HD alternative for improved performance. Perfect for Street or Track: Constructed from HD rubber instead of polyurethane or Delrin, this bushing provides comfort for daily driving while remaining effective in performance applications. Added Responsiveness: The 70D HD rubber compound is stiffer than the stock material, reducing drivetrain movement and effectively locking down your rear differential. Easy Installation: Precision-manufactured to the exact specifications of your OEM differential bushing, the ECS heavy-duty replacement installs just like the factory component. Whether you are replacing an aging factory bushing, removing excess driveline movement, or balancing performance and comfort, ECS Tuning has you covered with their Heavy Duty Rear Differential Bushing.

Shifter slop is a common complaint among all BMW models. Some of that play comes from the bushings where the shifter carrier mounts to the transmission. The original rubber carrier bushings don't last very long and when they get too soft the shifter flops around. These Teflon bushings are not as stiff as Delrin so they won't transmit as much vibration and buzz in the shifter. Yet Teflon will last much longer than the factory rubber, giving you precise shifting for many years.

Note: this is only one part of the shift linkage and there may be other components that need replacing to improve shifting feel.

We advise getting a replacement bushing carrier pin as well. If the original rubber bushings are worn the pin will have wear too and you will still have slop in the shifter, even with the new bushings.

These are the ROUND shifter carrier bushings (some BMW models have oval bushings).

This item fits the following BMWs:
6/1986-1992 E30 BMW 318i 318is 325e 325es 325i 325is 325ic M3
1992-1999 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic
1999-2006 E46 BMW 323i 323ci 325i 325ci
1982-1988 E28 BMW 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 535i M5

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and OE quality bushings that will give you a tighter shifting feel and will hold up like a day 1 BMW.

This kit is perfect to restore your driving pleasure!

See the included components under Kit Contents below.

Upgrade your BMW's shifting experience with the Turner Motorsport Chassis Mount Short Throw Shifter—the ultimate solution for precision, control, and race-inspired performance. Designed to eliminate excessive play, reduce shift throw, and enhance driver engagement, this shifter transforms your driving experience with a solid, direct feel that brings excitement to every shift.

Why Upgrade?

BMW's factory shifter assemblies are known for their vague and imprecise feel due to excessive play, soft bushings, and long throw distances. Traditional short shifters reduce shift length but often retain the factory shift carrier, which still allows flex and movement. The Turner Motorsport Performance Chassis Mount Short Shifter takes performance to the next level by completely removing the shift carrier, eliminating all bushing flex and driveline movement for unparalleled precision.

Unlike standard setups, this shifter features an elevated base that moves the fulcrum point higher, resulting in dramatically shorter throws and crisp, accurate shifts. The tall "rally-style" shift lever enhances leverage and positions the shifter closer to the steering wheel for faster gear changes. Additionally, an adjustable centering spring lets you fine-tune self-centering force for the perfect balance of resistance and smoothness.

Features & Benefits

Ultra-Short Throw – Optimized geometry and a raised fulcrum point drastically reduce shift travel for lightning-fast gear changes. Maximum Precision – Chassis-mounted design eliminates bushing flex and floating movement for a direct, race-inspired feel. Solid Shifter Engagement – Eliminates side-to-side play and imprecise gear selection for ultimate driver confidence. Adjustable Centering Spring – Customize the self-centering force to suit your driving style and preference. Premium Materials & Finish – Constructed from 6061 aluminum, 4130 steel, and 316 stainless steel with a durable black anodized finish for strength and longevity. Universal Fitment – Compatible with multiple BMW chassis using the included base plate and hardware (see "Fits These Cars" for exact applications). Race-Inspired Engineering

Designed for enthusiasts who demand the best, the Turner Motorsport Chassis Mount Short Shifter provides an unmatched shift feel and precision. The spherical bearing pivot with a maintenance-free brass insert ensures durability and smooth operation, while the rugged CNC-machined construction withstands aggressive shifting and track abuse.

Take full control of your BMW’s shifting performance with Turner Motorsport’s ultimate short shifter upgrade—built for the road, perfect for the track.