BMW Drivetrain Parts for BMW 3 Series E30 (1984-1991)

Turner Motorsport Shifter Rebuild & Upgrade Kit - E30 318i/is, 325i/i...

T#:555722

Part#: PBTSRKT25

In Stock

Sale - Save 23% $ 237.99

This product was last offered at the strikethrough price on
05-03-2026

$ 182.51 USD

Add to Wish List

Qty

Sale - Save 23%

$ 237.99

This product was last offered at the strikethrough price on
05-03-2026

$ 182.51 USD

Add to Wish List

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.

Show More Show Less

Getrag 260 Transmission To Engine Mounting Hardware Kit

T#:30197962

Part#: G260MTHWKTTKT

Ships in 3 Business Days

$ 97.99 USD

Add to Wish List

Qty

$ 97.99 USD

Add to Wish List

All new hardware for installing your G260 on an M20 motor, including new dowels and 10mm bolt that goes from the engine side into the transmission.

Whether your refreshing the transmission, doing the clutch and flywheel or doing a manual swap get a new set of hardware for piece of mind and many more service intervals.

Kit Contents:

M12x45 Torx bolt - 23001222890 (QTY2)
M12x75 Torx bolt - 23001222893 (QTY2)
Washer - 07119906063 (QTY 4)
Dowel - 11117524470 (QTY2)
M8x50 ASA Bolt - 23001222887 (QTY 4)
Wave Washer - 07119904115 (QTY 4)
M6x16 Hex Bolt - 07119913015 (QTY 1)
M10x65 Torx Bolt - 07129904681 (QTY2)
Wave Washer - 07119904463 (QTY2)
Hex Nut - 07129904865 (QTY2)

Show More Show Less

E30 M3 Front Wheel Bearing Hub Assembly

T#:338069

Part#: 31211468753

In Stock at Vendor

Starting at $ 144.97 USD

Add to Wish List

Starting at $ 144.97 USD

Add to Wish List

E30 M3 Front Hub Assembly w/bearing. This bearing requires that you use your existing ABS ring. This is a simple press fit. This is an OEM Wheel Bearing Hub Assemblies made by FAG. GSP and FAG are the leaders in wheel bearing technology. These wheel hubs are the best you can buy. Alternate part number 31212225362.

FAG is an OE supplier to BMW as well as several other German marques.

GSP is a high-quality supplier for aftermarket suspension components. They have quickly position themselves as an industry leader, and pride themselves on offering high-quality alternatives to their expensive OEM counterparts.

This hub uses the ABS ring from the E28 5-series. For the E30 M3 the original ABS ring will need to be removed and installed on the new hub.

Show More Show Less

Turner Motorsport Shifter Rebuild & Upgrade Kit - E30 325e/es (09/198...

T#:555723

Part#: PBTSRKT26

In Stock

Sale - Save 13% $ 332.28

This product was last offered at the strikethrough price on
05-03-2026

$ 288.17 USD

Add to Wish List

Qty

Sale - Save 13%

$ 332.28

This product was last offered at the strikethrough price on
05-03-2026

$ 288.17 USD

Add to Wish List

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.

Show More Show Less

E30 318i/is, E36 318i, Z3 1.9 JB Racing Lightweight Aluminum Flywheel...

T#:3769

Part#: 520-040-215

Back Ordered

11% off MSRP $ 765.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 679.00 USD

Add to Wish List

Qty

11% off MSRP

$ 765.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 679.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

Stock Flywheel Weight = 27.0lbs
JB Flywheel Weight = 9.0lbs

This item fits the following BMWs:
1989-1992 E30 BMW 318i 318is 318ic
1992-1997 E36 BMW 318i 318is 318ti 318ic
1996-1997 Z3 BMW Z3 1.9

Show More Show Less

Automatic Transmission Service Kit - E24, E23, E28, E30

T#:554397

Part#: E24635CSIATKT

In Stock

$ 154.17 USD

Add to Wish List

Qty

$ 154.17 USD

Add to Wish List

Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles. Included in this kit are high quality Red Line D4 ATF fluid and OEM filters, seals, and plugs.

Fits the following BMWs:
1978-1987 E23 BMW 733i 735i
1977-1989 E24 BMW 633CSi 635CSi
1982-1988 E28 BMW 528e 533i 535i/is
1984-1991 E30 BMW 318i/is 325i/is/ix 325e/es

Show More Show Less

Turner Motorsport Shifter Rebuild & Upgrade Kit - E30 M3

T#:555694

Part#: PBTSRKT5

Ships in 3 Business Days

Sale - Save 18% $ 265.99

This product was last offered at the strikethrough price on
05-03-2026

$ 217.73 USD

Add to Wish List

Qty

Sale - Save 18%

$ 265.99

This product was last offered at the strikethrough price on
05-03-2026

$ 217.73 USD

Add to Wish List

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.

Show More Show Less

Manual Transmission Service Kit - BMW E30 Non-M & M3

T#:30960425

Part#: TMSE30M3TSKT

In Stock

$ 109.99 USD

Add to Wish List

Qty

$ 109.99 USD

Add to Wish List

The oil in your manual transmission is extremely vital to the life of your transmission. Over time it will begin to break down, lose viscosity, and begin to allow excess heat and friction. This kit is the perfect remedy to this problem. Included are 2 quarts of Redline MTL 75w-80 transmission fluid, which features a fully synthetic base for better protection and wear resistance, and Genuine BMW fill and drain plugs.

Show More Show Less

E30 M3 JB Racing Lightweight Aluminum Flywheel

T#:3768

Part#: 520-050-228

Ships in 4 Business Days

$ 630.00 USD

Add to Wish List

Qty

$ 630.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

The JB flywheel includes ignition trigger wheel.

Stock Flywheel Weight = 19.5lbs
JB Flywheel Weight = 8.0lbs

This item fits the following BMWs:
1987-1991 E30 BMW M3

Show More Show Less

E30 325i, E34 525i (M20) JB Racing Lightweight Aluminum Flywheel (Rep...

T#:385699

Part#: 520-060-228

Ships on Aug 4, 2026

$ 581.00 USD

Add to Wish List

Qty

$ 581.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

This flywheel replaces the stock original single-mass flywheel and should only be used with the corresponding 'single-mass' clutch kit. According to BMW the single mass flywheel was installed in all 325i up to 12/86 production date but we have seen some later cars with a single-mass flywheel. The age of the car almost guarantees one or more clutch replacements and possibly a change to the original flywheel as well. You may not know which flywheel is currently installed until the flywheel cover or the transmission is removed.

Stock Flywheel Weight = 18.0lbs
JB Flywheel Weight = 8.0lbs

This item fits the following BMWs:
1984-1991 E30 BMW 325i 325ic 325is (with single-mass flywheel)
1989-1990 E34 BMW 525i (with single-mass flywheel)

Show More Show Less

2002, E21 320i, E30 318i (M10) JB Racing Lightweight Aluminum Flywhee...

T#:3647

Part#: 520-110-215

Ships in 2 Business Days

$ 581.00 USD

Add to Wish List

Qty

$ 581.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can be rebuilt too with a new clutch contact surface.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

Stock Flywheel Weight = 16.5lbs
JB Flywheel Weight = 8lbs

This item fits the following BMWs:
1974-1976 2002 BMW 2002
1977-1983 E21 BMW 320i
1984-1985 E30 BMW 318i

Show More Show Less

Rear Differential Service Kit for various BMW Models

T#:42133544

Part#: 835225790TKT

In Stock

$ 59.72 USD

Add to Wish List

Qty

$ 59.72 USD

Add to Wish List

The kit includes 2 Quarts of Red line 75w90 - 57904 and brand new Rein rear diff oil drain plug M22x1.5

Valeo Single Mass Flywheel Conversion Kit - E28, E30, E34, E36 ...

Not for vehicles with crank position sensor

We Price Match - Give Us A Call or Chat!

T#:377153

Part#: 52281208

Ships in 1 Business Day

$ 807.22 USD

Add to Wish List

Qty

$ 807.22 USD

Add to Wish List

Upgrade from your failure prone dual mass flywheel with this kit. Includes single mass flywheel, clutch kit and hardware.

Shifter Rebuild Kit - E30

T#:13430833

Part#: E30SHIFTREBUILKT

Ships in 3 Business Days

$ 211.99 USD

Add to Wish List

Qty

$ 211.99 USD

Add to Wish List

Everything you need to refresh your shifter! Our team of dedicated BMW experts is at your service! We took the guess work out of rebuilding the shifter for your E30.

E30 325e JB Racing Lightweight Aluminum Flywheel (Replaces Single-Mas...

T#:3763

Part#: 520-070-228

Ships in 5 Business Days

$ 630.00 USD

Add to Wish List

Qty

$ 630.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

The JB flywheel includes ignition trigger wheel.

This flywheel replaces the stock original single-mass flywheel and should only be used with the corresponding 'single-mass' clutch kit. According to BMW the single mass flywheel was installed in all 325e up to 5/86 production date but we have seen some later cars with a single-mass flywheel. The age of the car almost guarantees one or more clutch replacements and possibly a change to the original flywheel as well. You may not know which flywheel is currently installed until the flywheel cover or the transmission is removed.

Stock Flywheel Weight = 24.0lbs
JB Flywheel Weight = 8.5lbs

This item fits the following BMWs:
1984-1988 E30 BMW 325e 325es (with single mass flywheel)

Show More Show Less

JB Racing Lightweight Aluminum Flywheel & Clutch Kit

T#:15777312

Part#: 520-040-215-KT

Back Ordered

$ 1,003.99

This product was last offered at the strikethrough price on
05-07-2026

$ 994.99 USD

Add to Wish List

Qty

$ 994.99 USD

Add to Wish List

A lightweight aluminum flywheel is a great way to increase throttle response and free up horsepower by reducing drivetrain loss. Factory flywheels are built to minimize engine and transmission vibrations, making them heavier and requiring more energy to make them spin. An aluminum flywheel can save lots of weight over the stock steel unit - sometimes over 50%. While the dampening effect of the stock flywheel is reduced, most enthusiasts would agree that the increase in performance is well worth it. In addition, the lighter flywheel allows the engine to spin more freely, improving throttle response. This JB Racing lightweight aluminum flywheel kit and is designed to be used with the included factory clutch, making replacement and service easy and inexpensive, especially compared to specialized racing clutches. It also preserves the driveability of your car on the street, and enthusiasts tolerant of a mild to moderate NVH increase will be especially taken with this setup. In addition, the JB Racing flywheel can be easily rebuilt with a new clutch contact surface, allowing you to enjoy faster revs and superior response for many years to come. Stock Flywheel Weight: 27 lbs. JB Racing Lightweight Aluminum Flywheel: 9 lbs.

Show More Show Less

Turner Motorsport Shifter Rebuild Kit - E30 325e/es (up to 09/1986) ...

T#:555709

Part#: PBTSRKT14

Ships in 3 Business Days

Sale - Save 3% $ 209.99

This product was last offered at the strikethrough price on
06-15-2026

$ 203.76 USD

Add to Wish List

Qty

Sale - Save 3%

$ 209.99

This product was last offered at the strikethrough price on
06-15-2026

$ 203.76 USD

Add to Wish List

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and OE quality bushings that will give you a tighter shifting feel and will hold up like a day 1 BMW.

This kit is perfect to restore your driving pleasure!

See the included components under Kit Contents below.

Show More Show Less

E30 325e JB Racing Lightweight Aluminum Flywheel (Replaces Dual-Mass ...

T#:3749

Part#: 520-120-228

Ships in 3 Business Days

$ 854.00 USD

Add to Wish List

Qty

$ 854.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

The JB flywheel includes ignition trigger wheel.

This flywheel replaces the stock original dual-mass flywheel and should only be used with the corresponding 'dual-mass' clutch kit. According to BMW the dual mass flywheel was installed in all 325/325e from 5/86 on but we have seen some later cars with a single-mass flywheel. The age of the car almost guarantees one or more clutch replacements and possibly a change to the original flywheel as well. You may not know which flywheel is currently installed until the flywheel cover or the transmission is removed.

Stock Flywheel Weight = 27.5lbs
JB Flywheel Weight = 10.0lbs

This item fits the following BMWs:
1984-1988 E30 BMW 325e 325es (with dual mass flywheel)

Show More Show Less

Valeo Clutch Kit - E28, E30, E34, E36

For vehicles with production date from 05/1986

We Price Match - Give Us A Call or Chat!

T#:379443

Part#: 21211223546

Ships in 5 Business Days

$ 362.99 USD

Add to Wish List

Qty

$ 362.99 USD

Add to Wish List

Replace your worn or slipping clutch to restore drivability. Comprehensive kit includes pressure plate, clutch disc, throw out bearing, pilot bearing, and clutch alignment tool.

HD/Race Rigid 6 Pad

T#:14221793

Part#: BM17-HDR6

Ships in 2 Business Days

$ 820.00 USD

Add to Wish List

Qty

$ 820.00 USD

Add to Wish List

BM13-HDR6 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 6-pad spring-centered race disc features a spring-center to properly damp torsional vibrations for quieter operation and resist failure even under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 6-pad spring-centered race disc, engagement is harsher, but shifting is faster. ACT's 6-pad spring-centered race disc is well-suited for smaller disc sizes in smaller engines.

Show More Show Less

OE Engine And Manual Transmission Mount Kit - E30 318i/is M42 ...

T#:556123

Part#: 11811137076KT

Ships in 3 Business Days

$ 395.00

This product was last offered at the strikethrough price on
05-03-2026

$ 394.17 USD

Add to Wish List

Qty

$ 394.17 USD

Add to Wish List

Drive line slop is often caused by faulty engine and transmission mounts. This can result in knocking noises under heavy acceleration, excessive vibration, and a less responsive feel in power. These Genuine BMW mounts are perfect to eliminate these problems and provide long lasting reliability.

Included in this kit:

Genuine BMW Engine Mount (x2)
OEM Lemforder Manual Transmission Mount (x2)

Show More Show Less

Turner Motorsport Shifter Rebuild Kit - E30 318i/is 325i/is

T#:555699

Part#: PBTSRKT8

Ships in 3 Business Days

Sale - Save 2% $ 296.99

This product was last offered at the strikethrough price on
05-03-2026

$ 291.20 USD

Add to Wish List

Qty

Sale - Save 2%

$ 296.99

This product was last offered at the strikethrough price on
05-03-2026

$ 291.20 USD

Add to Wish List

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and OE quality bushings that will give you a tighter shifting feel and will hold up like a day 1 BMW.

This kit is perfect to restore your driving pleasure!

See the included components under Kit Contents below.

Show More Show Less

Ultimate Shifter Rebuild & Upgrade Kit - BMW E30 325i/is

T#:5649930

Part#: E30325USRKT

In Stock

Sale - Save 13% $ 502.91

This product was last offered at the strikethrough price on
05-03-2026

$ 437.89 USD

Add to Wish List

Qty

Sale - Save 13%

$ 502.91

This product was last offered at the strikethrough price on
05-03-2026

$ 437.89 USD

Add to Wish List

Stock rubber bushings and plastic inserts wear down quickly with age, leading to a shifter that is loose, soft, and sloppy. A sloppy shifter greatly detracts from your driving pleasure. If you want to bring back that factory crisp shifter, this kit will do that for you and then some! Not only will it totally overhaul your shifter, but also make it perform better than stock thanks to the ECS Tuning Teflon Oval Shifter Bushings, Turner Motorsport Poly Shifter Arm Bushing, and Turner Motorsport DSSR included in the kit. These parts working together will eliminate all side-to-side and fore-and-aft slop, giving you significantly more engaging shifts. Included: Turner Motorsport Double Shear Selector Rod (DSSR) - Replaces BMW 25111221657 (09/89+) & 25111220838 (Up to 09/89) Turner Motorsport Polyurethane Shifter Arm Bushing ECS Teflon Oval Shifter Bushings Plastic Washers Rubber Shifter Boot Dowel & Bearing Pins Shifter Ball Bushing Shifter Rod Joint Necessary Hardware

Show More Show Less

Rear Axle Shaft Replacement Kit

T#:15744037

Part#: 332075727170-KT

Back Ordered

Sale - Save 10% $ 1,188.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,069.72 USD

Add to Wish List

Qty

Sale - Save 10%

$ 1,188.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,069.72 USD

Add to Wish List

Includes left and right axles and hardware

Getrag 260 Transmission Seal Kit

T#:29898446

Part#: G260SEALKT

In Stock

Sale - Save 26% $ 20.99

This product was last offered at the strikethrough price on
04-10-2026

$ 15.60 USD

Add to Wish List

Qty

Sale - Save 26%

$ 20.99

This product was last offered at the strikethrough price on
04-10-2026

$ 15.60 USD

Add to Wish List

Includes input, output, and selector rod seals. Great for servicing your transmission during a clutch and flywheel job.

HD/Race Sprung 6 Pad

T#:14221780

Part#: BM13-HDG6

In Stock at Vendor

$ 1,607.00 USD

Add to Wish List

Qty

$ 1,607.00 USD

Add to Wish List

BM13-HDG6 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 6-pad spring-centered race disc features a spring-center to properly damp torsional vibrations for quieter operation and resist failure even under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 6-pad spring-centered race disc, engagement is harsher, but shifting is faster. ACT's 6-pad spring-centered race disc is well-suited for smaller disc sizes in smaller engines.

Show More Show Less

HD/Perf Street Sprung

T#:14221789

Part#: BM13-HDSS

Ships in 2 Business Days

$ 1,588.00 USD

Add to Wish List

Qty

$ 1,588.00 USD

Add to Wish List

This kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability.

Show More Show Less

HD/Race Sprung 4 Pad

T#:14221779

Part#: BM13-HDG4

In Stock at Vendor

$ 1,599.00 USD

Add to Wish List

Qty

$ 1,599.00 USD

Add to Wish List

BM13-HDG4 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 4-pad spring-centered race disc features a spring-center to properly damp torsional vibrations for quieter operation and resist failure even under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 4-pad spring-centered race disc, engagement is harsher, but shifting is faster. ACT's 4-pad spring-centered race disc is well-suited for smaller disc sizes in smaller engines.

Show More Show Less

HD/Race Rigid 6 Pad

T#:14221788

Part#: BM13-HDR6

Ships in 2 Business Days

$ 1,554.00 USD

Add to Wish List

Qty

$ 1,554.00 USD

Add to Wish List

BM13-HDR6 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 6-pad spring-centered race disc features a spring-center to properly damp torsional vibrations for quieter operation and resist failure even under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 6-pad spring-centered race disc, engagement is harsher, but shifting is faster. ACT's 6-pad spring-centered race disc is well-suited for smaller disc sizes in smaller engines.

Show More Show Less

HD/Race Rigid 4 Pad

T#:14221783

Part#: BM13-HDR4

In Stock at Vendor

$ 1,535.00 USD

Add to Wish List

Qty

$ 1,535.00 USD

Add to Wish List

BM13-HDR4 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 4-pad spring-centered race disc features a spring-center to properly damp torsional vibrations for quieter operation and resist failure even under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 4-pad spring-centered race disc, engagement is harsher, but shifting is faster. ACT's 4-pad spring-centered race disc is well-suited for smaller disc sizes in smaller engines.

Show More Show Less

HD/Race Sprung 4 Pad

T#:14221778

Part#: BM12-HDG4

Ships in 6 Business Days

$ 1,559.00 USD

Add to Wish List

Qty

$ 1,559.00 USD

Add to Wish List

BM12-HDG4 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 4-pad spring-centered race disc features a spring-center to properly damp torsional vibrations for quieter operation and resist failure even under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 4-pad spring-centered race disc, engagement is harsher, but shifting is faster. ACT's 4-pad spring-centered race disc is well-suited for smaller disc sizes in smaller engines.

Show More Show Less

Pilot Bearing BMW/Porsche

T#:54388433

Part#: PB1002

In Stock at Vendor

$ 8.00 USD

Add to Wish List

Qty

$ 8.00 USD

Add to Wish List

Universal Short Shifter V3 - Self Centering - Black Reverse Button Wi...

T#:55317707

Part#: IRPUSSKT2

Ships in 7 Business Days

$ 528.99 USD

Add to Wish List

Qty

$ 528.99 USD

Add to Wish List

Stop guessing where the gate is. Upgrade your connection to the machine and drive your BMW the way it was meant to be driven.

Lightweight Aluminum Flywheel - BMW E30 325i/x M20

T#:5774217

Part#: 520-065-228

Ships on Aug 10, 2026

$ 630.00 USD

Add to Wish List

Qty

$ 630.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Show More Show Less

E30 325/318 Front Wheel Bearing Hub Assembly

T#:338067

Part#: 31211131297

Back Ordered

Starting at $ 204.97 USD

Add to Wish List

Starting at $ 204.97 USD

Add to Wish List

E30 325/318 Front Hub Assembly w/bearing. Fits all E30 cars (not M3, not 325iX AWD) with or w/o ABS. For cars w/o ABS simply remove ABS ring.

FAG is an OE supplier to BMW as well as several other German marques.

GSP is a high-quality supplier for aftermarket suspension components. They have quickly position themselves as an industry leader, and pride themselves on offering high-quality alternatives to their expensive OEM counterparts.

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is

Show More Show Less

Genuine BMW Engine And Auto Transmission Mount Kit - E30 325e/es 325i...

T#:556137

Part#: E30325DMKT2

Back Ordered

Sale - Save 3% $ 284.99

This product was last offered at the strikethrough price on
05-03-2026

$ 277.61 USD

Add to Wish List

Qty

Sale - Save 3%

$ 284.99

This product was last offered at the strikethrough price on
05-03-2026

$ 277.61 USD

Add to Wish List

Drive line slop is often caused by faulty engine and transmission mounts. This can result in knocking noises under heavy acceleration, excessive vibration, and a less responsive feel in power. These Genuine BMW mounts are perfect to eliminate these problems and provide long lasting reliability.

Included in this kit:

Genuine BMW Engine Mount (x2)
Genuine BMW AutomaticTransmission Mount (x2)
New Installation Hardware

Show More Show Less

Genuine BMW Engine And Manual Transmission Mount Kit - E30 325e/es 32...

T#:556136

Part#: E30325DMKT

Back Ordered

Sale - Save 2% $ 324.99

This product was last offered at the strikethrough price on
05-03-2026

$ 318.18 USD

Add to Wish List

Qty

Sale - Save 2%

$ 324.99

This product was last offered at the strikethrough price on
05-03-2026

$ 318.18 USD

Add to Wish List

Drive line slop is often caused by faulty engine and transmission mounts. This can result in knocking noises under heavy acceleration, excessive vibration, and a less responsive feel in power. These Genuine BMW mounts are perfect to eliminate these problems and provide long lasting reliability.

Included in this kit:

Genuine BMW Engine Mount (x2)
Genuine BMW Manual Transmission Mount (x2)
New Installation Hardware

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Drivetrain Parts for BMW 3 Series E30 (1984-1991)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results