BMW Drivetrain Parts for BMW 3 Series E30 (1984-1991)

Condor Speed Shop G260 Transmission Brace for 24v Swaps - E30 BMW ...

T#:577863

Part#: G260TBRACE

Ships in 1 Business Day

$ 75.00 USD

Add to Wish List

Qty

$ 75.00 USD

Add to Wish List

Ultra-light aluminum G260 transmission brace for 24V engine swaps. This brace must be used if swapping a 24v motor into an e30, with the original G260 transmission. *Please note you will need to bend/twist the selector rod to get your shift lever in the correct orientation.

Show More Show Less

Condor Speed Shop Differential Stud Kit - 45mm - E30, E28, E36 318ti,...

T#:578193

Part#: DIFSTKT-1

In Stock

$ 32.00 USD

Add to Wish List

Qty

$ 32.00 USD

Add to Wish List

Condor Speed Shop took the hard work out of removing and reinstalling your differential! If you've ever taken out your diff, you know how much of a pain it is to get the bolt holes to line up during re-installation. They never seem to line up perfectly, and getting the bolts to go in can be time-consuming. Condor's diff studs are designed to make your life a little easier. The diff will line up and lift right into the holes every time. 38mm studs are used with OEM or regular subframe bushings. 45mm studs are used with the 12mm riser subframe bushings. You'll need to pull the driveshaft to drop the diff. Use thread locker during install. Recommended for street or race use. Kit includes: 4 Studs 4 Washers 4 Lock Nuts

Show More Show Less

Condor Speed Shop M20+20 Engine Riser Motor Mount & Solid Transmissio...

T#:577564

Part#: S14M+T

Ships in 3 Business Days

$ 80.00 USD

Add to Wish List

Qty

$ 80.00 USD

Add to Wish List

These specific mounts are designed for those with clearance issues on extremely low E30s. They are 20mm taller than OEM mounts to add necessary clearance to ensure the oil pan sits above the stock subframe. Under hard braking the OEM rubber mounts allow the m20 to lean forward. Not only do these solid UHMW replacement mounts stiffen the engine and drivetrain, but they also raise the engine by 20mm, dramatically changing the responsiveness and raising the oil pan height of your E30. UHMW is an excellent general-purpose plastic with a unique combination of wear and corrosion resistance, low friction surface and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties to -30 C. This kit includes Solid Transmission Mounts as well for fully solid powertrain mounting!

Show More Show Less

Condor Speed Shop Solid UHMW M20 Motor Mount Set & Transmission Mount...

T#:577859

Part#: M20M_TRANS

Ships in 3 Business Days

$ 79.00 USD

Add to Wish List

Qty

$ 79.00 USD

Add to Wish List

Under hard braking the stock mounts allow the m20 to pitch forward and to the side. These solid UHMW replacement mounts stiffen the engine and drivetrain, dramatically changing the responsiveness of your BMW E30. These solid UHMW motor mounts are a direct replacement for your original 1984-1991 E30 BMW 323, 325e 325es 325i 325ic 325is' OEM rubber motor mounts. UHMW is an excellent general-purpose plastic with a unique combination of wear and corrosion resistance, low friction surface and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties to -30 C. Includes solid transmission mounts as well!

Show More Show Less

Direct bolt-in axle (Priced Each) - E30 M3

T#:402380

Part#: RA2401L5

In Stock at Vendor

$ 1,678.99 USD

Add to Wish List

Qty

$ 1,678.99 USD

Add to Wish List

E30 Direct Bolt-In Rear Axle. The Level 5 Direct Bolt-In Axle for the E30 feature a direct fit outer CV with ABS ring, heavy duty torsional axle bars made from high-grade aircraft quality material, and a larger than factory 6-bolt Porsche style 108mm Inner CV with a bolt-on flange and stub into the differential. These axles are complete and ready to install with no modifications necessary.
The Driveshaft Shop has been manufacturing heavy duty replacement driveshafts for street and track vehicles around the world for the last thirty years. Every single shaft is dynamically balanced at over 9000 RPMs to ensure unbeatable reliability. With materials such as Carbon Fiber, Aluminum, and Chromoly The Driveshaft Shop has a solution for you no matter what the application.

*Priced Per axle

This part fits the following BMWs:
1985 - 1991 E30 M3

Show More Show Less

Condor Speed Shop Solid Differential Bushing - E30, E28, Z3 & 318ti ...

T#:587122

Part#: DIFE30

Ships in 2 Business Days

$ 55.00 USD

Add to Wish List

Qty

$ 55.00 USD

Add to Wish List

Condor Speed Shop's E30 solid differential bushing is designed for the street and the track. They use UHMW in all of their suspension bushings because it is stiff, has almost zero deflection yet also absorbs some vibration. It will outlast other types of rubber or urethane bushings. With their solid diff bushing, you won't have to worry about any more rubbery flex in your diff during hard acceleration.

Show More Show Less

Condor Speed Shop M20+20 Engine Riser Motor Mount Set - E30

T#:577565

Part#: S14M

Ships in 1 Business Day

$ 55.00 USD

Add to Wish List

Qty

$ 55.00 USD

Add to Wish List

These specific mounts are designed for those with clearance issues on extremely low E30s. They are 20mm taller than OEM mounts to add necessary clearance to ensure the oil pan sits above the stock subframe. Under hard braking the OEM rubber mounts allow the m20 to lean forward. Not only do these solid UHMW replacement mounts stiffen the engine and drivetrain, but they also raise the engine by 20mm, dramatically changing the responsiveness and raising the oil pan height of your E30. UHMW is an excellent general-purpose plastic with a unique combination of wear and corrosion resistance, low friction surface and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties to -30 C.

Show More Show Less

HD/Race Rigid 6 Pad

T#:14221793

Part#: BM17-HDR6

Ships in 2 Business Days

$ 820.00 USD

Add to Wish List

Qty

$ 820.00 USD

Add to Wish List

BM13-HDR6 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 6-pad spring-centered race disc features a spring-center to properly damp torsional vibrations for quieter operation and resist failure even under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 6-pad spring-centered race disc, engagement is harsher, but shifting is faster. ACT's 6-pad spring-centered race disc is well-suited for smaller disc sizes in smaller engines.

Show More Show Less

Condor Speed Shop Solid Motor & Transmission Mount Set - E30 w/ M10 ...

T#:577966

Part#: E30_M10M_TRANS

In Stock at Vendor

$ 115.00 USD

Add to Wish List

Qty

$ 115.00 USD

Add to Wish List

These solid UHMW motor mounts are made specifically for M10 powered e30s. Under hard braking the stock mounts allow the M10 to lean forward. These solid UHMW replacement mounts stiffen the engine and drivetrain, dramatically changing the responsiveness of your 318. These solid UHMW motor mounts are a direct replacement for OEM rubber motor mounts. UHMW is an excellent general-purpose plastic with a unique combination of wear and corrosion resistance, low friction surface and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties to -30 C. Includes solid transmission mounts as well.

Show More Show Less

Condor Speed Shop Solid Engine & Transmission Mount Set - E30 318i/is...

T#:577964

Part#: E30_M42M_TRANS

Ships in 2 Business Days

$ 125.00 USD

Add to Wish List

Qty

$ 125.00 USD

Add to Wish List

These solid UHMW motor mounts are made specifically for M42 powered e30s. Under hard braking the stock mounts allow the M42 to lean forward. These solid UHMW replacement mounts stiffen the engine and drivetrain, dramatically changing the responsiveness of your 318. These solid UHMW motor mounts are a direct replacement for OEM rubber motor mounts. UHMW is an excellent general-purpose plastic with a unique combination of wear and corrosion resistance, low friction surface and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties to -30 C. Fitment: 1990-1991 E30 BMW 318i, 318is, 318ic

Show More Show Less

HD/Race Sprung 4 Pad

T#:14221778

Part#: BM12-HDG4

Ships in 6 Business Days

$ 1,559.00 USD

Add to Wish List

Qty

$ 1,559.00 USD

Add to Wish List

BM12-HDG4 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 4-pad spring-centered race disc features a spring-center to properly damp torsional vibrations for quieter operation and resist failure even under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 4-pad spring-centered race disc, engagement is harsher, but shifting is faster. ACT's 4-pad spring-centered race disc is well-suited for smaller disc sizes in smaller engines.

Show More Show Less

Pilot Bearing BMW/Porsche

T#:54388433

Part#: PB1002

In Stock at Vendor

$ 8.00 USD

Add to Wish List

Qty

$ 8.00 USD

Add to Wish List

HD/Race Rigid 4 Pad

T#:14221783

Part#: BM13-HDR4

In Stock at Vendor

$ 1,535.00 USD

Add to Wish List

Qty

$ 1,535.00 USD

Add to Wish List

BM13-HDR4 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 4-pad spring-centered race disc features a spring-center to properly damp torsional vibrations for quieter operation and resist failure even under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 4-pad spring-centered race disc, engagement is harsher, but shifting is faster. ACT's 4-pad spring-centered race disc is well-suited for smaller disc sizes in smaller engines.

Show More Show Less

HD/Race Sprung 6 Pad

T#:14221780

Part#: BM13-HDG6

In Stock at Vendor

$ 1,607.00 USD

Add to Wish List

Qty

$ 1,607.00 USD

Add to Wish List

BM13-HDG6 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 6-pad spring-centered race disc features a spring-center to properly damp torsional vibrations for quieter operation and resist failure even under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 6-pad spring-centered race disc, engagement is harsher, but shifting is faster. ACT's 6-pad spring-centered race disc is well-suited for smaller disc sizes in smaller engines.

Show More Show Less

HD/Race Rigid 6 Pad

T#:14221788

Part#: BM13-HDR6

Ships in 2 Business Days

$ 1,554.00 USD

Add to Wish List

Qty

$ 1,554.00 USD

Add to Wish List

BM13-HDR6 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 6-pad spring-centered race disc features a spring-center to properly damp torsional vibrations for quieter operation and resist failure even under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 6-pad spring-centered race disc, engagement is harsher, but shifting is faster. ACT's 6-pad spring-centered race disc is well-suited for smaller disc sizes in smaller engines.

Show More Show Less

Condor Speed Shop Solid Motor Mount Set - E30 w/ M10

T#:577965

Part#: E30_M10M

Ships in 2 Business Days

$ 90.00 USD

Add to Wish List

Qty

$ 90.00 USD

Add to Wish List

These solid UHMW motor mounts are made specifically for M10 powered e30s. Under hard braking the stock mounts allow the M10 to lean forward. These solid UHMW replacement mounts stiffen the engine and drivetrain, dramatically changing the responsiveness of your 318. These solid UHMW motor mounts are a direct replacement for OEM rubber motor mounts. UHMW is an excellent general-purpose plastic with a unique combination of wear and corrosion resistance, low friction surface and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties to -30 C.

Show More Show Less

HD/Race Sprung 4 Pad

T#:14221779

Part#: BM13-HDG4

In Stock at Vendor

$ 1,599.00 USD

Add to Wish List

Qty

$ 1,599.00 USD

Add to Wish List

BM13-HDG4 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 4-pad spring-centered race disc features a spring-center to properly damp torsional vibrations for quieter operation and resist failure even under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 4-pad spring-centered race disc, engagement is harsher, but shifting is faster. ACT's 4-pad spring-centered race disc is well-suited for smaller disc sizes in smaller engines.

Show More Show Less

HD/Perf Street Sprung

T#:14221789

Part#: BM13-HDSS

Ships in 2 Business Days

$ 1,588.00 USD

Add to Wish List

Qty

$ 1,588.00 USD

Add to Wish List

This kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Drivetrain Parts for BMW 3 Series E30 (1984-1991)

Sub-Categories

Condor Speed Shop G260 Transmission Brace for 24v Swaps - E30 BMW ...

Condor Speed Shop Differential Stud Kit - 45mm - E30, E28, E36 318ti,...

Condor Speed Shop M20+20 Engine Riser Motor Mount & Solid Transmissio...

Condor Speed Shop Solid UHMW M20 Motor Mount Set & Transmission Mount...

Direct bolt-in axle (Priced Each) - E30 M3

Condor Speed Shop Solid Differential Bushing - E30, E28, Z3 & 318ti ...

Condor Speed Shop M20+20 Engine Riser Motor Mount Set - E30

HD/Race Rigid 6 Pad

Condor Speed Shop Solid Motor & Transmission Mount Set - E30 w/ M10 ...

Condor Speed Shop Solid Engine & Transmission Mount Set - E30 318i/is...

HD/Race Sprung 4 Pad

Pilot Bearing BMW/Porsche

HD/Race Rigid 4 Pad

HD/Race Sprung 6 Pad

HD/Race Rigid 6 Pad

Condor Speed Shop Solid Motor Mount Set - E30 w/ M10

HD/Race Sprung 4 Pad

HD/Perf Street Sprung

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results