BMW Coilovers for Street Use for BMW 3 Series E30 (1984-1991)

Clear BMW chassis

Please ensure your correct model is selected

There are several coilover options on the market - while a lot of this decision boils down to preference, we categorize coilovers as aEURoestreetaEUR based on price and comfort level. Coilovers in our street category will be comfortable enough to use on your daily driver, but perform well enough to handle occasional autocross days and light track use. These coilovers also won't break the bank. However, many of the options we have under street coilovers share many of the same features as our track coilovers, they often just utilize less durable materials and won't hold up as well to torcher testing.
Sort By:

BC Racing BR Series Coilover Suspension Kit - E30 318i/is 325e/es/i/i...
For vehicles with a 51mm front strut - Must be welded in to existing suspension. Extreme Low by Default from BC Racing.
BC Racing - Corporate Logo
T#:555859
Part#: I-07-BR
In Stock
Sale - Save 10% $ 1,215.00

This product was last offered at the strikethrough price on
11-21-2026

$ 1,090.00 USD
Free Shipping
Sale - Save 10%
$ 1,215.00

This product was last offered at the strikethrough price on
11-21-2026

$ 1,090.00 USD
Free Shipping

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

For vehicles with a 51mm front strut - Must be welded in to existing suspension

 

Specs and Features:

  • 8k Front & 8k Rear Spring Rate
  • Linear front & Linear rear springs
  • Valved specifically to spring style and rate
  • Camber Plate Front Mounts
  • Aluminum and Rubber Rear Mounts
  • Black Powder Coated Components
  • All OE style brackets and mounting for perfect fit
  • 30 Levels of Simultaneous Compression and Rebound Dampening
  • 2 inch minimum and 3+ Inches of total potential drop
  • Great for Track, Street, and any other conditions
Show More Show Less
BC Racing - Corporate Logo
T#:555828
Part#: I-48-BR
In Stock
Sale - Save 10% $ 1,195.00

This product was last offered at the strikethrough price on
11-21-2026

$ 1,070.00 USD
Free Shipping
Sale - Save 10%
$ 1,195.00

This product was last offered at the strikethrough price on
11-21-2026

$ 1,070.00 USD
Free Shipping

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

For vehicles with 45mm front struts - Requires being welded in to existing suspension

Specs and Features:

  • 7k Front & 5k Rear Spring Rate
  • Linear front & Linear rear springs
  • Valved specifically to spring style and rate
  • Camber Plate Front Mounts
  • Aluminum and Rubber Rear Mounts
  • Black Powder Coated Components
  • All OE style brackets and mounting for perfect fit
  • 30 Levels of Simultaneous Compression and Rebound Dampening
  • 2 inch minimum and 3+ Inches of total potential drop
  • Great for Track, Street, and any other conditions
Show More Show Less
BC Racing - Corporate Logo
T#:555845
Part#: I-24-BR
In Stock
Sale - Save 10% $ 1,195.00

This product was last offered at the strikethrough price on
11-21-2026

$ 1,070.00 USD
Free Shipping
Sale - Save 10%
$ 1,195.00

This product was last offered at the strikethrough price on
11-21-2026

$ 1,070.00 USD
Free Shipping

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

For vehicles with 51mm front struts - Must be welded in to existing suspension

Specs and Features:

  • 8k Front & 8k Rear Spring Rate
  • Linear front & Linear rear springs
  • Valved specifically to spring style and rate
  • Camber Plate Front Mounts
  • Aluminum and Rubber Rear Mounts
  • Black Powder Coated Components
  • All OE style brackets and mounting for perfect fit
  • 30 Levels of Simultaneous Compression and Rebound Dampening
  • 2 inch minimum and 3+ Inches of total potential drop
  • Great for Track, Street, and any other conditions
Show More Show Less

BC Racing - Corporate Logo
T#:568112
Part#: I-04E-BR
Ships on Jan 14, 2027
$ 1,345.00 USD
Free Shipping
$ 1,345.00 USD
Free Shipping
Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection. Specs and Features: 6k Front & 12k Rear Spring Rate V-Barrel front & Linear rear springs Valved specifically to spring style and rate Camber Plate Front Mounts Aluminum and Rubber Front Mounts Black Powder Coated Components All OE style brackets and mounting for perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening Extreme Drop version allows additional 1-1.5" lowering over the standard 2-4" lowering from traditional BR suspension kits Shocks are 1" shorter in length and springs are specifically selected for greater lowering capabilities Great for Track, Street, and any other conditions
Show More Show Less

BC Racing - Corporate Logo
T#:555860
Part#: I-04-BR
Ships on Jan 14, 2027
Sale - Save 9% $ 1,345.00

This product was last offered at the strikethrough price on
11-21-2026

$ 1,220.00 USD
Free Shipping
Sale - Save 9%
$ 1,345.00

This product was last offered at the strikethrough price on
11-21-2026

$ 1,220.00 USD
Free Shipping

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

For vehicles with a 45mm front strut - Must be welded in to existing suspension

Specs and Features:

  • 8k Front & 8k Rear Spring Rate
  • Linear front & Linear rear springs
  • Valved specifically to spring style and rate
  • Camber Plate Front Mounts
  • Aluminum and Rubber Rear Mounts
  • Black Powder Coated Components
  • All OE style brackets and mounting for perfect fit
  • 30 Levels of Simultaneous Compression and Rebound Dampening
  • 2 inch minimum and 3+ Inches of total potential drop
  • Great for Track, Street, and any other conditions
Show More Show Less
BC Racing - Corporate Logo
T#:598282
Part#: I-24-DS
Back Ordered
Sale - Save 9% $ 1,395.00

This product was last offered at the strikethrough price on
11-21-2026

$ 1,270.00 USD
Free Shipping
Sale - Save 9%
$ 1,395.00

This product was last offered at the strikethrough price on
11-21-2026

$ 1,270.00 USD
Free Shipping
The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort. Swift Springs are available upon request with your choice of rates and matched or custom valving.
Show More Show Less

ECS Adjustable Coilover System & Turner Motorsport Offset Polyurethan...
Our Doorbuster deals are in limited supply at these prices. Get yours while they're in stock! Can't find the perfect bundle? Call or chat with us to build a custom one. 10X Entries For Our Spin To Win Sweepstakes!
Doorbusters - Corporate Logo
T#:47439407
Part#: 051535LADBKT2
Ships on Mar 26, 2027
Sale - Save 24% $ 1,078.99

This product was last offered at the strikethrough price on
11-07-2026

$ 822.99 USD
Free Shipping
Sale - Save 24%
$ 1,078.99

This product was last offered at the strikethrough price on
11-07-2026

$ 822.99 USD
Free Shipping

Push your E30’s handling to the next level with this limited-time Doorbuster bundle, combining ECS Performance Adjustable Coilovers with Turner Motorsport Polyurethane Front Control Arm Bushings for sharper cornering, reduced deflection, and a more connected, engaging driving experience.

ECS Performance Adjustable Coilover System – E30 (51mm)

Engineered for the enthusiast who drives daily but demands performance, ECS coilovers strike the perfect balance of firmness, compliance, and aggressive stance. With fully adjustable ride height and 32 levels of damping, these coilovers improve handling while maintaining comfort, giving your E30 a refined, track-ready feel.

Performance Highlights:

32 levels of rebound damping adjustment for precise tuning

Lowering range: 1" – 4" for perfect stance and lowered center of gravity

Spring rates: 8K Front / 10K Rear, heat-treated progressive coil springs

Monotube adjustable shocks/struts paired with optimized springs for reduced body roll

Adjustable front and rear bodies maintain correct spring preload and shock valving regardless of ride height

Design & Construction:

Strut and shock bodies finished in durable gloss black powder coat

Threaded portions zinc-coated for corrosion protection

Coil springs finished in Reflex Silver Metallic

Red anodized aluminum spring seats with locking collars for quick, on-car adjustments

Adjustable sway bar end links with heavy-duty bushings included

Integrated bump stops and dust boots, zinc-coated mounting hardware

Turner Motorsport Offset Polyurethane Front Control Arm Bushings (80A)

Start your handling upgrade at the control arms. Factory bushings prioritize comfort, allowing deflection that softens steering and braking precision. Turner 80A polyurethane bushings replace this softness with a direct connection to the chassis, reducing slop while maintaining streetable compliance. Pre-installed in high-quality housings, these bushings also feature an offset design for increased caster, enhancing straight-line stability and cornering performance.

Key Features:

80A polyurethane for firm yet compliant handling

Offset design increases caster for improved tracking and stability

Pre-installed in durable housings for easy installation

CNC-machined Delrin center sleeve ensures low friction, high precision, and deflection-free operation

Internal grease retention grooves included; bushing grease supplied

Show More Show Less
BC Racing - Corporate Logo
T#:568093
Part#: I-24E-BR
Ships on Jan 14, 2027
$ 1,345.00 USD
Free Shipping
$ 1,345.00 USD
Free Shipping
Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection. Specs and Features: 6k Front & 12k Rear Spring Rate V-Barrel front & Linear rear springs Valved specifically to spring style and rate Camber Plate Front Mounts Aluminum and Rubber Front Mounts Black Powder Coated Components All OE style brackets and mounting for perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening Extreme Drop version allows additional 1-1.5" lowering over the standard 2-4" lowering from traditional BR suspension kits Shocks are 1" shorter in length and springs are specifically selected for greater lowering capabilities Great for Track, Street, and any other conditions
Show More Show Less

Select Vehicle