Revitalize your classic E30 with improved throttle response, optimized airflow, and a clean, performance-oriented engine bay.

Designed specifically for BMW E30 models equipped with the M20 6-cylinder engine, this Turner Motorsport Intake System is a comprehensive upgrade that blends performance gains with OEM-style fitment and high-quality materials.

Passionately engineered to support increased engine efficiency across the RPM range, this intake system improves throttle response and ensures reliable airflow while maintaining full compatibility with factory components, including the stock AFM elbow.

Constructed with a durable stainless steel AFM bracket, 5052 powder-coated aluminum heatshield, and a heat-resistant silicone intake hose, this kit is built to last. It also includes a coolant overflow pass-through to support late-model E30 cooling systems, making it fully compatible with both early and late 6-cylinder models.

Installation is straightforward with no permanent modifications required, and detailed instructions are included.

Product Features:

Designed for all BMW E30 6-cylinder models with M20 engines
Retains the use of the factory AFM elbow
Durable stainless steel AFM mounting bracket
5052 powder-coated aluminum heatshield
High-quality silicone intake hose
Coolant overflow line pass-through for late-model cooling systems
Direct bolt-on installation – no permanent modifications required
Installation instructions included
Kit Contents:

Stainless Steel AFM Bracket
AFM Inlet Adapter & Gasket
Silicone Intake Elbow
Filter Adapter
Turner Blue Performance Cone Filter
5052 Aluminum Powder-Coated Heatshield
Stainless Steel Mounting Hardware
Give your E30 the performance and clean aesthetic it deserves. Engineered by enthusiasts, for enthusiasts.

Complete your 24V swap with an intake designed specifically for the job. The Turner 24V Swap Heat-Shield Intake is engineered for E30 engine conversions, delivering cold, dense airflow in tight engine bays while retaining use of the factory air duct.

Most swaps leave you with two less-than-ideal choices: bolt a filter directly to the MAF and suck in hot under-hood air, or cobble together a universal intake that still lacks proper heat shielding. Our swap intake eliminates those compromises.

Our low-profile, heat-shielded design isolates the filter from radiant engine heat, works seamlessly with the stock 3.0" MAF, and supports factory CCV/ICV routing. The result is OEM-like fitment with modern airflow efficiency, no wiring hacks, no vacuum headaches, just a clean, reliable intake solution built for your swap.

Key features:

Heat shield designed to fit M20 and M5X swapped cars — mounts to the frame rail and ties into the ABS mount for rock-solid positioning. Creates a colder air pocket where the factory inlet duct is.
5052 powder-coated aluminum heatshield, stiff, corrosion-resistant, and finished for a long life in the swap environment.
The black silicone intake elbow and coupler is a compliant, high-temperature silicone that grips clamps and resists blow-off during repeated fitment and heat cycles.
Retains stock 3.0" MAF, no adapters needed to run the factory OBD1/OBD2 MAF in a factory-like location.
Designed to preserve stock CCV and ICV hoses for M50/M52 setups, this keeps the typical manifold and crank-vents intact, thereby avoiding vacuum and idle headaches common in swaps.
Stainless-steel hardware for longevity and corrosion resistance.
Fitment & compatibility:

Specifically engineered to work with common 24V conversions where space is tight and retaining OEM-style plumbing is desired. Mounts to factory frame rail/ABS brackets, minimal modification required.

M50/M52 engines are among the most popular 24V choices thanks to robust iron blocks, widespread availability, and strong aftermarket support, making them an excellent pairing for turbo or naturally aspirated builds. Keeping the stock MAF and CCV/ICV routing reduces the troubleshooting surface during install and helps complete your swap faster.

Kit Contents:

Heat Shield
Hi-flow Turner Air Filter
Silicone Throttle Body Boot with plug
Maf Coupler
Inlet/Air Filter Adapter
Inlet Tube Bracket
Hardware for installation
Product Development:

Our Turner 24v Intake System was designed, engineered, tested, and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology, including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing. Performance data metrics are collected utilizing Mustang AWD 500 SE in-ground dyno and in-house Superflow SF-750 Flowbench.

Universal High-Flow Air Filter

Give your engine the airflow it deserves with this reusable, high-performance air filter—perfect as a direct replacement for an ECS intake system or as the finishing touch for your custom intake project.
Dimensions: 4.5" Base OD • 6" Filter Height • 3.5" Top OD

Upgrade from your restrictive factory filter to an ECS Tuning High-Flow Dry Air Filter and let your engine breathe freely. Improved intake flow enhances power throughout the rev range while helping maintain efficient fuel economy.

Oiled vs. Dry Filters — Which Is Right for You?

Oiled Filters

Offer slightly higher airflow for maximum performance

Require more frequent cleaning

Must be re-oiled after each cleaning

Long-term reusable design saves money over disposable paper filters

Dry Filters

Provide excellent airflow with minimal maintenance

Easily cleaned with warm, soapy water—no oiling required

Still flow significantly better than OE paper filters

Fully reusable and cost-effective

Both versions deliver superior performance over stock filters while offering the long-term benefit of reusability. Choose the option that best fits your maintenance style and performance goals.

Ensure optimal engine performance with the replacement of your vacuum system hoses. The vacuum system plays a crucial role in the engine's functionality, transforming it into an efficient pump that influences air-fuel mixture and combustion. Damaged vacuum hoses can lead to various performance issues, from rough idle to difficulties starting the engine. If you're experiencing these issues, it's time to upgrade to this plastic hose with a 2.3mm inner diameter. The hose is black, arrives in an 8-foot section, and can be easily cut to the desired size for a perfect fit.

Key Features:

• Engine Optimization: Replacing old hoses ensures the vacuum system operates at peak performance.
• 2.3mm Inner Diameter: Designed to meet specific engine requirements.
• Black Color: Blends seamlessly with the engine components.
• 8-Foot Section: Provides flexibility to cut the hose to the required length.
• Easy Installation: Upgrade without hassle for improved engine efficiency.

Upgrade your vacuum system with this high-quality plastic hose, addressing performance issues and ensuring your engine runs smoothly.

For optimal performance, consider the 46.5mm To 61.0mm Silicone Coupler.

Engineered with durability and functionality in mind, this silicone coupler provides a reliable connection for various components in your vehicle's intake or cooling system. Its smooth interior surface promotes efficient airflow, while its flexible and reinforced construction ensures a secure fit and prevents leaks. Enjoy hassle-free installation and enhanced performance with this premium silicone coupler.

• Durable silicone construction
• Smooth interior surface for efficient airflow
• Flexible and reinforced design prevents leaks
• Secure fit for reliable performance
• Hassle-free installation

ECS Silicone Coupler

Upgrade your BMW with the ECS Silicone Coupler. This straight 3 5/8" ID (92mm) x 3" L coupler is designed to enhance your vehicle's performance and durability. Crafted from high-quality silicone, it ensures long-lasting reliability and superior performance.

• Enhances vehicle performance
• Durable construction for long-lasting reliability
• Specifically designed for BMW vehicles

3" To 2.5" Silicone Coupler 3" Length

Enhance the performance and durability of your BMW or MINI with the 3" To 2.5" Silicone Coupler 3" Length. This silicone coupler provides a reliable connection between components, ensuring optimal airflow and reducing the risk of leaks. Engineered for durability and heat resistance, it withstands high temperatures and harsh conditions. Upgrade your BMW or MINI with this premium silicone coupler for improved performance.

• Reliable connection for optimal airflow
• Reduces the risk of leaks for enhanced performance
• Engineered for durability and heat resistance
• Fits both BMW and MINI models