BMW Suspension Bushings & Mounts for BMW 7 Series E38 (1995-2001)

Clear BMW chassis

Please ensure your correct model is selected

Suspension mounts are designed to absorb the energy of the shocks and springs and isolate road harshness from the chassis. But over time the original rubber mounts will crumble and fail. We have stock mounts and bushings as well as a wide selection of upgraded and heavier-duty for performance street cars. We also offer a full selection of race only bushings and mounts. Simply choose your car below. Included here you will find rear shock tower mounts, front strut mounts, subframe mounts, lower control arm bushings, rear trailing arm bushings, and more.

Sub-Categories

Sort By:

Powerflex - Corporate Logo
T#:376407
Part#: PFF5-503-27X2
In Stock
$ 57.99 USD
Free Shipping
$ 57.99 USD
Free Shipping
Stiffer bushings allow sway bars to work at their fullest potential. For 27mm front sway bar.
Front Upper Strut Mount - E38 740i/il 750i/il
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:7741
Part#: 31331090611
Ships in 6 Business Days
$ 28.99

This product was last offered at the strikethrough price on
05-07-2026

$ 24.99 USD
Free Shipping on orders $49 and up
$ 24.99 USD
Free Shipping on orders $49 and up
Upper shock mounts and bearings are good to replace while replacing front shocks. It is easier and often less expensive to replace them preventatively than to have them fail shortly afterward and have to take apart the whole suspension a second time. This shock tower bearing fits E38 7 series.

It's also a good idea to replace the upper spring plate and bearing at the same time. Often, these bearings are worn out and should not be put back in the car. See below for the link to add these to order too.

Sold individually

This item fits the following BMWs:
1995-2001 E38 BMW 740i 740il 750il
Show More Show Less
Febi Rear Shock Mount - E38
For vehicles without EDC and without self leveling suspension
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:382612
Part#: 33521094091
Ships in 2 Business Days
$ 52.99

This product was last offered at the strikethrough price on
05-07-2026

$ 45.99 USD
Free Shipping on orders $49 and up
$ 45.99 USD
Free Shipping on orders $49 and up
Replacement is recommended when servicing rear shocks

Powerflex - Corporate Logo
T#:376491
Part#: PFF5-503-25X2
Ships in 1 Business Day
$ 57.99 USD
Free Shipping
$ 57.99 USD
Free Shipping

Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This in turn reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

Show More Show Less

Febi Front Control Arm Bushings - Pair - E38, E39
Common cause of shuddering or vibration under braking.
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:381915
Part#: 31120006482
Ships on Nov 30, 2026
$ 69.99 USD
Free Shipping
$ 69.99 USD
Free Shipping
Also referred to as thrust arm or traction strut bushing. Rear position front control arm.
Powerflex - Corporate Logo
T#:376434
Part#: PFF5-503-205X2
Back Ordered
$ 59.99 USD
Free Shipping
$ 59.99 USD
Free Shipping

Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This in turn reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

Show More Show Less

Powerflex - Corporate Logo
T#:362715
Part#: PCG1
In Stock
$ 1.99 USD
Free Shipping on orders $49 and up
The Powerflex silicone grease is the only lubricant we suggest for long, squeak free operation. The lubricant contains silicone that resists heat and water and keeps a more constant viscosity to allow it to stay in the bushing as temperatures increase. The lubricant also does not lose it's lubrication properties over time like an anti-seize type lubricant. Each pack will lube 2 large bushings or 4 small.
Show More Show Less
Powerflex - Corporate Logo
T#:53997734
Part#: PFR5-713H
Ships in 1 Business Day
New Item
$ 90.99 USD
$ 90.99 USD
Designed to eliminate un-sprung compliance, this component locks down rear-toe geometry during hard braking, aggressive corner entry, and high-speed acceleration.

Powerflex - Corporate Logo
T#:54139649
Part#: PFR5-504-10H
Back Ordered
New Item
$ 57.99 USD
$ 57.99 USD
The E38 is a legendary chassis, but its weight demands a lot from the suspension. Upgrading to the 10mm Powerflex rear sway bar bushing is one of the most cost-effective ways to restore that taught, 'planted' European driving dynamic without sacrificing the ride quality the 7 Series is famous for.
Show More Show Less

Powerflex - Corporate Logo
T#:54139650
Part#: PFR5-504-10
Ships in 1 Business Day
New Item
$ 57.99 USD
$ 57.99 USD
The E38 is a legendary chassis, but its weight demands a lot from the suspension. Upgrading to the 10mm Powerflex rear sway bar bushing is one of the most cost-effective ways to restore that taught, 'planted' European driving dynamic without sacrificing the ride quality the 7 Series is famous for.
Show More Show Less
Powerflex - Corporate Logo
T#:53997731
Part#: PFR5-715H
Ships in 1 Business Day
New Item
$ 101.99 USD
$ 101.99 USD
Designed to eliminate un-sprung compliance, this component locks down rear-toe geometry during hard braking, aggressive corner entry, and high-speed acceleration.
Powerflex - Corporate Logo
T#:53997737
Part#: PFR5-712H
Ships in 1 Business Day
New Item
$ 108.99 USD
$ 108.99 USD
Designed to eliminate un-sprung compliance, this component locks down rear-toe geometry during hard braking, aggressive corner entry, and high-speed acceleration.


Powerflex - Corporate Logo
T#:54388409
Part#: PFF5-503-215H
Ships in 1 Business Day
New Item
$ 59.99 USD
$ 59.99 USD
Eliminate front sway bar deflection on your E38 7 Series. These 21.5mm Heritage polyurethane bushings optimize roll stabilization while maintaining a discrete, factory-original dark grey aesthetic.
Powerflex - Corporate Logo
T#:54388393
Part#: PFF5-503-205H
Ships in 1 Business Day
New Item
$ 59.99 USD
$ 59.99 USD
Eliminate front sway bar slop on your E38. These 20.5mm Heritage polyurethane bushings optimize cornering stability while maintaining a discrete, factory-original dark grey appearance under the chassis.
Show More Show Less
Powerflex - Corporate Logo
T#:53997727
Part#: PFR5-716H
Ships in 1 Business Day
New Item
$ 80.99 USD
$ 80.99 USD
Designed to eliminate un-sprung compliance, this component locks down rear-toe geometry during hard braking, aggressive corner entry, and high-speed acceleration.

Powerflex - Corporate Logo
T#:54388402
Part#: PFF5-503-215
Ships in 1 Business Day
New Item
$ 59.99 USD
$ 59.99 USD
Lock down your front anti-roll bar geometry. These 21.5mm polyurethane bushings eliminate mounting deflection, ensuring immediate sway bar transition and track-ready front chassis stability under load.
Show More Show Less