Home
Suspension

BMW Suspension Parts for BMW E39 M5 S62 5.0L

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

Front Upper Strut Mount - E39 540i M5 and Z8

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:2148

Part#: 31331091708

In Stock

$ 62.99 USD

Add to Wish List

Qty

$ 62.99 USD

Add to Wish List

Upper shock mounts and bearings are good to replace while replacing front shocks. It is easier and often less expensive to replace them preventatively than to have them fail shortly afterward and have to take apart the whole suspension a second time. This front shock tower bearing fits BMW E39 540i M5 and Z8.

It's also a good idea to replace the upper spring plate and bearing at the same time. Often, these bearings are worn out and should not be put back in the car. See below for the link to add these to order too.

This item fits the following BMWs:
1997-2003 E39 BMW 540i M5
1997-2003 E39 BMW 528i 530i - only for cars with EDC - electronic damping control

E52 BMW Z8 Z8 Alpina

Show More Show Less

Front Sway Bar Link for E39 M5 and 540i

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:5238

Part#: 31351095664

Ships in 1-2 days

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

The front sway bar links are known to fail on the E39 5 Series V8 models (540i and M5). Early sway bar link failures produce clunking noises and vibration, while more serious failure will leave the front sway bar disconnected and cause serious handling issues. This is a replacement sway bar end link for the 1997-2003 BMW 540i and 2000-2003 BMW M5 (all V8 models).

This swaybar link fits the following BMW:
1997-2003 E39 540i sedan / wagon
2000-2003 E39 M5 sedan

Show More Show Less

Febi Rear Sway Bar End Link - E39

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:363822

Part#: 33551095532

Ships on Oct 7, 2026

$ 28.99 USD

Add to Wish List

Qty

$ 28.99 USD

Add to Wish List

Two per vehicle, replaceable individually.

KMAC Stage 1 Street Front Adjustable Camber/Caster Plates - E39 540/M...

For models with a 10/1997+ production date

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:389661

Part#: 193616-1J

Special Order: No Guaranteed ETA

$ 380.00 USD

Add to Wish List

Qty

$ 380.00 USD

Add to Wish List

Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i 540i (for cars with EDC)
1999-2003 E39 BMW M5
1995-2001 E38 BMW 740i 740il 750il (for cars with EDC)

Show More Show Less

Febi Rear Upper Control Arm - Right - E39

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:382600

Part#: 33326767832

Ships in 1 Business Day

$ 99.99

This product was last offered at the strikethrough price on
05-07-2026

$ 85.99 USD

Add to Wish List

Qty

$ 85.99 USD

Add to Wish List

Direct replacement for your vehicles suspension

Febi Rear Upper Control Arm - Left - E39

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:382599

Part#: 33326767831

Ships in 2 Business Days

$ 93.99

This product was last offered at the strikethrough price on
05-07-2026

$ 82.99 USD

Add to Wish List

Qty

$ 82.99 USD

Add to Wish List

Direct replacement suspension component

KMAC Stage 2 Street/Track Front Adjustable Camber/Caster Plates - E39...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:389317

Part#: 193616-2L

Special Order: No Guaranteed ETA

$ 545.00 USD

Add to Wish List

Qty

$ 545.00 USD

Add to Wish List

Location: Front
Type: Street/Track, Stage 2
Bearing: PTFE-lined pillow-ball with thin polyurethane bushing

The Stage 2 KMAC plates are a mixed street/track camber/caster plate meant to be used in a variety of suspensions. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions. Bearing inserts and adapters included. The Stage 2 camber plates are shorter than a factory mount so may not be suitable for cars will little suspension travel. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2006-2008 E85 BMW Z4 M Roadster M Coupe

Show More Show Less

KMAC Street Rear Inner Adjustable Camber/Toe Bushings - E39 M5 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:389669

Part#: 194026J

Special Order: No Guaranteed ETA

$ 380.00 USD

Add to Wish List

Qty

$ 380.00 USD

Add to Wish List

Perfect for lowered cars that need to dial out negative camber to preserve tires. Also perfect for track cars - easily dial in toe and camber for the track for better handling. Priced per set.

This item fits the following BMWs:
1998-2004 E39 BMW M5

Show More Show Less

KMAC Stage 3 Track Front Adjustable Camber/Caster Plates - E39 540/M5...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:389662

Part#: 193616-3L

Special Order: No Guaranteed ETA

$ 545.00 USD

Add to Wish List

Qty

$ 545.00 USD

Add to Wish List

Location: Front
Type: Track, Stage 3
Bearing: PTFE-lined pillow-ball, no bushing

KMAC Stage 3 camber/caster plates are designed for track or race-only situations where comfort and noise are not the primary concerns. The Stage 3 camber plates use a pillowball bearing, solidly mounted within the camber plate for direct alignment of the strut shaft and no excess play or deflection. Stage 3 are designed to increase negative camber with their patented 'floating' adjustment that changes camber and caster together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Fitment is limited to race-only small diameter coil-over springs (not stock-type). Bearing inserts and adapters included. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i 540i (for cars with EDC)
1999-2003 E39 BMW M5
1995-2001 E38 BMW 740i 740il 750il (for cars with EDC)
2004-2010 E60 BMW M5
2004-2011 E63 BMW M6

Show More Show Less

Febi Front Control Arm Bushings - Pair - E38, E39

Common cause of shuddering or vibration under braking.

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:381915

Part#: 31120006482

Ships on Oct 7, 2026

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

Also referred to as thrust arm or traction strut bushing. Rear position front control arm.

Febi Ball Joint - E38, E39, E53, E60, E61, E63, E64, E65, E66 ...

Two required per vehicle, one per side.

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:382598

Part#: 33326767748

Back Ordered

$ 52.99

This product was last offered at the strikethrough price on
07-08-2026

$ 26.99 USD

Add to Wish List

Qty

$ 26.99 USD

Add to Wish List

Pressed into rear wheel carrier

Febi Front Straight Control Arm - Right - E39

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:363767

Part#: 31121141962

Back Ordered

$ 74.99 USD

Add to Wish List

Qty

$ 74.99 USD

Add to Wish List

Referred to as a wishbone

Febi Front Straight Control Arm - Left - E39

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:363766

Part#: 31121141961

Back Ordered

$ 74.99 USD

Add to Wish List

Qty

$ 74.99 USD

Add to Wish List

Referred to as a wishbone

Ball Joint Snap Ring - Priced Each

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:363178

Part#: 33321091687

In Stock

$ 1.09 USD

Add to Wish List

Qty

$ 1.09 USD

Add to Wish List

One required per ball joint

Febi Rear Guide Link - E39, E60, E61, E63, E64, E65, E66

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:1195990

Part#: 33322348886

In Stock at Vendor

$ 104.99

This product was last offered at the strikethrough price on
05-07-2026

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

Includes integrated ball joint and bushing

Spring Seat

For vehicles with production date up to 10/1999

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:16907175

Part#: 31331096664

Ships on Oct 7, 2026

$ 10.99 USD

Add to Wish List

Qty

$ 10.99 USD

Add to Wish List

This pad is used as a bushing between the spring and strut. After time the pad wears down and causing front end noise.

Febi Ball Bearing For Strut Mounting

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:16375125

Part#: 31331090612SK

Special Order: No Guaranteed ETA

$ 16.99 USD

Add to Wish List

Qty

$ 16.99 USD

Add to Wish List

These replacements from Febi are the perfect solution for worn mounts/bearings. Because they are factory OE parts, they fit perfectly in the mounting location and are the proper length and have the correct inside diameter for your struts. A small addition to any front suspension overhaul that can make a huge difference in overall ride quality. Priced each, but should always be replaced in pairs. To get the most out of your new suspension setup, it's recommended that you replace all parts that are known to fail. Not only will this make your new setup more effective, it will provide a better ride, proper tire position, and make all of your parts last longer. One often overlooked piece is the upper strut bearing and mount. This is the top mount for your struts and provides a solid platform for your front suspension. If worn, the bearings within this mount make noise, there is slop from worn rubber, and it can shorten the life of your shocks.

Project Cars

SELECT YOUR BMW

BMW Suspension Parts for BMW E39 M5 S62 5.0L

Sub-Categories

Front Upper Strut Mount - E39 540i M5 and Z8

Front Sway Bar Link for E39 M5 and 540i

Febi Rear Sway Bar End Link - E39

KMAC Stage 1 Street Front Adjustable Camber/Caster Plates - E39 540/M...

Febi Rear Upper Control Arm - Right - E39

Febi Rear Upper Control Arm - Left - E39

KMAC Stage 2 Street/Track Front Adjustable Camber/Caster Plates - E39...

KMAC Street Rear Inner Adjustable Camber/Toe Bushings - E39 M5 ...

KMAC Stage 3 Track Front Adjustable Camber/Caster Plates - E39 540/M5...

Febi Front Control Arm Bushings - Pair - E38, E39

Febi Ball Joint - E38, E39, E53, E60, E61, E63, E64, E65, E66 ...

Febi Front Straight Control Arm - Right - E39

Febi Front Straight Control Arm - Left - E39

Ball Joint Snap Ring - Priced Each

Febi Rear Guide Link - E39, E60, E61, E63, E64, E65, E66

Spring Seat

Febi Ball Bearing For Strut Mounting

Select Vehicle

Purpose

Category

Brand

Price

Shipping

Narrow Results