BMW Control Arm Replacements & Upgrades for BMW E39 M5 S62 5.0L

This sealed ball joint is in the lower rear outer control arm (swing arm) and is the primary weak point of the rear suspension. This one ball joint takes a lot of twisting and deflection so this is usually the first bushing to wear out. When it does, you have a 'loose' or disconnected feeling in the rear alignment. You can restore your car's stability by replacing this ball joint and also evaluating the other components in the rear suspension (upper wishbones and guide links). This part is made by Lemforder, the Original Equipment Manufacturer, and is a perfect fit and excellent quality. A new snap ring is included for your convenience. Beware of non-OEM brands at cheap prices that will not perform at the same standards as BMW intended.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
2004+ E63 BMW 645ci 650i M6
1995-2001 E38 BMW 740i 740il 750il
2000-2006 E53 BMW X5 3.0i X5 4.4i X5 4.6is X5 4.8is
2000-2003 E52 BMW Z8 E65 BMW 745i 745li 750i 750li 760i 760li

This is a small, 'dogbone' shaped piece that runs from the rear lower control arm to the hub. The lower outer ball joint is mounted in the same location and this is often replaced with the ball joint.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Brand: Lemforder (OEM)
Price is for each - order 2 to replace both on the car.
This item fits the following BMWs:
1995-2001 E38 BMW 740i 740il 750il
1997-2003 E39 BMW 525i 528i 530i 540i M5
2000-2003 E52 BMW Z8 Roadster
2000-2006 E53 BMW X5 3.0i X5 4.4i X5 4.6is
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i
2004-2011 E63 E64 BMW 645ci 650i
2002-2008 E65 BMW 745i 745li 750i 750li 760i 760li

The front control arm bushings is the Achilles heel on the E39 models. The original factory bushings are fluid filled and rely on the fluid to absorb vibration and resist deflection. When the fluid is gone the rubber left over cannot match the original bushing's strength. The left over rubber is not stiff enough to resist the movements from the suspension. The result is a lot of vibration and reduced feedback and response from the steering. 

Meyle has addressed this issue with bushings that are not fluid-filled. The bushing is made of solid rubber that will last longer than the original bushing and is a bit stiffer than new originals for better response and feel. The lack of play from the solid rubber design will mean sharper steering, restoring much of the car's precision and 'connected' feel. 

This control arm comes with the Meyle HD bushings already pressed in. This makes for an easy swap out-swap in install. These arms replace the existing stock upper control arms - otherwise known as a tension strut or strut support arm. It's the arm with the twist. 

Meyle is a German brand in business since 1958 and all of their products are TUV approved and meet or exceed ISO standards. All Meyle HD parts come with a 4-year, unlimited mileage warranty. 

Features:

• 4 Year Warranty

• All metal ball joints are more reliable and longer lasting than stock

• Bushings are solid rubber rather than fluid filled, providing longevity and handling feel improvements

This item fits the following BMWs:
1997-2003 E39 5 Series BMW 540i, 540i Wagon, M5

The Powerflex Non-M Rear Lower Arm Rear Bushing for the BMW E39 5 Series, specifically designed for a 12mm fitting, is an excellent performance enhancement for the vehicle's rear suspension system. By replacing the factory rubber bushings with high-performance polyurethane, this bushing offers numerous advantages for improved handling and stability.

Key Benefits:

1. Enhanced Suspension Performance: The stiffer polyurethane material reduces flex and unwanted movement in the rear lower arm, resulting in improved handling characteristics. This upgrade enhances cornering stability, allowing for more confident driving, especially in dynamic situations.

2. Long-lasting Durability: Unlike factory rubber bushings, which can deteriorate over time, these polyurethane bushings are engineered to withstand extreme conditions. They resist wear from oil, heat, and road debris, ensuring long-lasting performance and reliability.

3. Improved Driver Feedback: The firmer bushing design allows for better road feel and steering response, giving drivers a more connected experience with the vehicle. This leads to enhanced control during cornering and a more engaging driving experience.

4. Simple Installation: Designed for a direct fit into the BMW E39 5 Series lower arm, these bushings require no modifications for installation. This ease of fitment makes it a straightforward upgrade for enthusiasts and DIYers alike.

5. Versatile Use: Whether for daily driving or spirited performance applications, these bushings help optimize the rear suspension setup, improving tire contact with the road and enhancing overall performance.

This upgrade is ideal for BMW E39 5 Series owners who want to enhance their vehicle's handling capabilities and stability. The Powerflex Non-M Rear Lower Arm Rear Bushing is a reliable choice for improving the performance of the rear suspension system, making it suitable for various driving conditions and styles.