Emissions System for BMW 5 Series E60 (2004-2010)

BMS N54 Upgraded Replacement PCV Valve For BMW

T#:38587650

Part#: N54PCVVR

Back Ordered

$ 40.00 USD

Add to Wish List

Qty

$ 40.00 USD

Add to Wish List

The BMS N54 Upgraded Replacement PCV Valve is a high-performance upgrade designed to enhance crankcase ventilation and minimize excessive blow-by in BMW N54 engines. Unlike the stock PCV valve, which can degrade over time and lead to oil consumption or boost leaks, this upgraded version provides superior sealing and long-term durability. ### Key Features: - **Direct-Fit Replacement** – Designed for an exact fit, ensuring hassle-free installation. - **Optimized Ventilation** – Improves crankcase pressure management, reducing oil blow-by and deposits. - **Enhanced Durability** – Constructed from premium materials to withstand high-boost applications and prolonged use. - **Boost Leak Prevention** – Delivers a tighter seal than the factory valve, preventing power loss. - **Ideal for Tuned Engines** – A critical upgrade for N54-powered vehicles running increased boost levels. Upgrade your N54’s crankcase ventilation system with the BMS Upgraded PCV Valve to ensure maximum performance, reliability, and engine longevity.

Show More Show Less

BMW N54 3.0L Blow-By Vent Hose

2X Entries Into Our F80 M3 Sweepstakes

T#:594297

Part#: 11157553949

In Stock

$ 40.99 USD

Add to Wish List

Qty

$ 40.99 USD

Add to Wish List

This hose directs the oil & combustion vapors from the valve cover and directs them to the intake manifold where they are put through combustion again in order to reduce emissions. When installing one of our N54 Oil Catch Cans the connections on this hose will often break. We recommend replacing this hose at the same time as your catch can. When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Show More Show Less

E82 135i N54, E9X 335 N54, E60 535 Vargas Upgraded PCV Valve ...

2X Entries Into Our F80 M3 Sweepstakes

T#:389684

Part#: VTT-N54-PCV

In Stock

$ 68.99 USD

Add to Wish List

Qty

$ 68.99 USD

Add to Wish List

The crankcase oil vent system on the N52/N54 is one of its weakest and cheaply designed systems. We see crankcase vent issues on even stock engines but with more boost the problems are exponential. This Vargas upgraded PCV valve, and an oil catch can, are what the N54 engine needs and may alleviate most of your oil and boost leak issues. The PCV valve is supposed to let oil either return to the oil pan or pass through the intake manifold and get burned up in the combustion chamber. However, BMW used a weak plastic vent valve that doesn't seal well when under boost. Instead of closing and venting the oil out of the intake, it's forced through this valve and into the intake and coating your valves with oil residue and carbon. Most boost equals more oil forcing its way by. This upgraded N54 PCV valve uses higher grade materials, including aluminum, to provide a better seal and prevent oil from entering the intake. It's an easy install and a must-have item when considering any turbo work.

Show More Show Less

Rein Crankcase Vent Hose

2X Entries Into Our F80 M3 Sweepstakes

T#:17804807

Part#: 11157522931

Ships in 1 Business Day

$ 44.99

This product was last offered at the strikethrough price on
10-12-2026

$ 38.99 USD

Add to Wish List

Qty

$ 38.99 USD

Add to Wish List

Manufactured with high-quality materials to withstand heat, dirt, oil, and other debris.

Rein Crank Case Vent Hose - E60, E82, E83, E88, E90, E91, E92, E93, Z...

2X Entries Into Our F80 M3 Sweepstakes

T#:402018

Part#: 11157559528

In Stock

$ 48.99 USD

Add to Wish List

Qty

$ 48.99 USD

Add to Wish List

Over time this hose can become clogged and blocked up causing running problems. This is a direct factory replacement for the PCV hose.

AutoTecknic - Carbon Competition Fuel Cap Cover - Various BMW and MIN...

T#:39971046

Part#: BM-0006-BCG

In Stock

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

AutoTecknic - Carbon Competition Fuel Cap Cover - Various BMW and MINI Models is a premium exterior upgrade crafted from genuine carbon fiber, designed to enhance the aggressive styling and performance aesthetic of compatible BMW and MINI vehicles with an easy, OEM-fit installation.

Show More Show Less

Upper Oil Separator Vent Tube

2X Entries Into Our F80 M3 Sweepstakes

T#:378292

Part#: 11617504535

Ships in 2 Business Days

$ 22.99 USD

Add to Wish List

Qty

$ 22.99 USD

Add to Wish List

Runs from the top of the oil separator up to intake manifold.

Upper Oil Separator Vent Tube

2X Entries Into Our F80 M3 Sweepstakes

T#:552486

Part#: 11617533399

Ships in 1-2 days

$ 35.99 USD

Add to Wish List

Qty

$ 35.99 USD

Add to Wish List

Runs from the top of the oil separator up to rear of the intake manifold.

OEM Rein Oil Separator Vent Hose - E60/61 E90/91 Z4

2X Entries Into Our F80 M3 Sweepstakes

T#:13029

Part#: 11617559530

Ships in 4 Business Days

$ 66.99

This product was last offered at the strikethrough price on
05-07-2026

$ 43.99 USD

Add to Wish List

Qty

$ 43.99 USD

Add to Wish List

BMW has an ongoing issue with oil separators freezing in cold weather if driving is done before the vehicle is fully warmed up. There is often a howling noise followed by numerous oil leaks. The crankcase breather valve is used to purge the oil vapor from the engine block into the valve cover. However, sometimes condensation can cause it to freeze, causing the entire oil separator system to fail, crack, and disintegrate. Replace this and all the other components of the oil separator system to prevent damage to all the aspects of your engine. As long as you have everything off, you can rest assured that new parts will last and be reliable.

Show More Show Less

Billet Upgraded Vacuum Cannisters

T#:21045535

Part#: BMS-N54VACANS

Back Ordered

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

N54 powered BMW vehicles have two of these tanks, one for each turbo. They accumulate and hold vacuum/air to be used on both turbos. The factory plastic N54 boost vacuum tanks tend to leak and cause problems. If vacuum can't be stored the wastegates will not function, leading to common low boost or overboost faults. We have the solution, the all-new heavy-duty BMS tanks. Specifically made for stock to high-boost N54 engines. Each tank is made from 100% aluminum and features two CNC machined aluminum end caps and are anodized black to complement your engine compartment. Featuring BMS logos, metal barbed vacuum fittings, and integrated brackets for solid mounting in the factory location. Not only do these look awesome under the hood, but they will also last forever. Replaces OEM BMW part #11652247620 Features & Benefits Full lightweight aluminum construction Heavy-duty upgrade Factory-like fit Sold in pairs Made in the USA

Show More Show Less

BMW Crankcase Pressure Regulator Valve

2X Entries Into Our F80 M3 Sweepstakes

T#:46478579

Part#: ABH0263

In Stock

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

BMW has an ongoing issue with oil separators freezing in cold weather if driving is done before the vehicle is fully warmed up. There is often a howling noise followed by numerous oil leaks. The crankcase breather valve is used to purge the oil vapor from the engine block into the valve cover. However, sometimes condensation can cause it to freeze, causing the entire oil separator system to fail, crack, and disintegrate. Replace this and all the other components of the oil separator system to prevent damage to all the aspects of your engine. As long as you have everything off, you can rest assured that new parts will last and be reliable.

Show More Show Less

Air Adjustment Unit/DISA Valve Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15677538

Part#: 11617533344-KT

In Stock

Sale - Save 25% $ 162.99

This product was last offered at the strikethrough price on
05-03-2026

$ 122.12 USD

Add to Wish List

Qty

Sale - Save 25%

$ 162.99

This product was last offered at the strikethrough price on
05-03-2026

$ 122.12 USD

Add to Wish List

A bad DISA valve can cause a variety of issues, from a loud racket in the engine bay, hesitation at low rpm and a rough idle with lean codes. If the valve is making a loud noise, we recommend replacing it as soon as possible. It is possible for the pin holding the flap to be sucked into the motor causing serious damage. Very easy to replace, just need to undo the 4 bolts holding it to the intake manifold. Includes new mounting hardware

Show More Show Less

Bosch Oxygen Sensors - Bank 1 And 2 Pre-Cat - N52

10X Entries Into Our F80 M3 Sweepstakes

T#:56110313

Part#: 11787558055KT

In Stock

$ 307.99

This product was last offered at the strikethrough price on
08-13-2026

$ 304.99 USD

Add to Wish List

Qty

$ 304.99 USD

Add to Wish List

Your engine's air fuel ratio needs to be dead on. Worn out factory pre-cat oxygen sensors delay vital data to the DME, leading to sub optimal fueling, lost horsepower, and dangerous hesitation under load.

Show More Show Less

Rein Crankcase Ventilation Hose - Cylinders 1-4

For vehicles with updated valve cover, 11127563474

2X Entries Into Our F80 M3 Sweepstakes

T#:17738390

Part#: 11617563476

Ships in 4 Business Days

$ 46.99 USD

Add to Wish List

Qty

$ 46.99 USD

Add to Wish List

Manufactured with high-quality materials to withstand heat, dirt, and debris, matching OE expectations.

Rein Return Pipe - E39, E46, E53, E60, E83, Z3, Z4

2X Entries Into Our F80 M3 Sweepstakes

T#:375092

Part#: 11617504536

In Stock

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

Runs from the intake manifold back to connecting hose

OEM Rein Oil Separator Vent Hose - E60/1 E90/1 N52

2X Entries Into Our F80 M3 Sweepstakes

T#:402020

Part#: 11617522933

Ships in 2 Business Days

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

If your BMW has a damaged vent hose, be sure to replace it to restore functionality of this rather important emissions system.

Hose - From Oil Separator to Oil Dipstick Tube - E46 E39

For use in cold climates

2X Entries Into Our F80 M3 Sweepstakes

T#:2879

Part#: 11157532629

In Stock at Vendor

$ 10.99 USD

Add to Wish List

Qty

$ 10.99 USD

Add to Wish List

This is the updated hose that goes from the Crankcase Oil Separator Valve to the oil dipstick tube. This tube tends to get plugged with oil sludge and becomes brittle and cracks. It fits E46 323i 323ci 325i (M54) 325ci (M54) 325xi 328i 328ci 330i 330ci 330xi - E39 525i 530i - E60 525i 530i 2004-2005 - X3 2.5i 3.0i 2004-2006 - Z3 2.5i 3.0i - Z4 2.5i 3.0i 2003-2006.
In german, Rein means Pure. In the automotive industry the Rein name has quickly come to represent quality. With fitments for some of the world’s finest automobiles including BMW and Mini and guaranteed OE quality, Rein is a name you can trust.

This item fits the following BMWs:
2001-2005 E46 BMW 325i 325ci 325xi Only for cars with M54 engine
1999-2005 E46 BMW 323i 323ci 328i 328ci 330i 330ci 330xi
2001-2003 E39 BMW 525i 530i
2004-2005 E60 BMW 525i 525xi 530i 530xi
2004-2006 E83 BMW X3 2.5i X3 3.0i
2001-2002 Z3 BMW Z3 2.5i Z3 3.0i
2003-2005 Z4 BMW Z4 2.5i Z4 3.0i

Show More Show Less

Rein Pressure Regulator Valve Repair Kit - E53, E60, E63, E64, E65, E...

2X Entries Into Our F80 M3 Sweepstakes

T#:55821694

Part#: 11127547058

Ships in 4 Business Days

$ 16.99 USD

Add to Wish List

Qty

$ 16.99 USD

Add to Wish List

This Rein Automotive repair kit allows you to service the internal components of the crankcase breather valve independently. Instead of replacing the entire, costly valve cover or manifold assembly, this kit provides the exact wear items required to rebuild the factory housing back to original operating specifications. All components are manufactured to strict OE tolerances. The diaphragm is molded from premium, oil-resistant elastomers engineered to withstand prolonged exposure to aggressive synthetic lubricants, fuel vapors, and extreme under-hood heat cycles without losing its elasticity or sealing profile.

Show More Show Less

Idle Control Valve Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15744026

Part#: 11611437453-KT

In Stock

$ 173.13 USD

Add to Wish List

Qty

$ 173.13 USD

Add to Wish List

Located in the intake system, this part is a common source of idle issues. This kit includes a new mount and idle control valve grommet

Rein Crankcase Ventilation Hose - E39, E46, E60, E83, Z3, Z4 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:359420

Part#: 11157532649

Ships in 4 Business Days

$ 11.99 USD

Add to Wish List

Qty

$ 11.99 USD

Add to Wish List

ENGINE VENT HOSE 11157532649

Project Cars

SELECT YOUR BMW

Emissions System for BMW 5 Series E60 (2004-2010)

Sub-Categories

BMS N54 Upgraded Replacement PCV Valve For BMW

BMW N54 3.0L Blow-By Vent Hose

E82 135i N54, E9X 335 N54, E60 535 Vargas Upgraded PCV Valve ...

Rein Crankcase Vent Hose

Rein Crank Case Vent Hose - E60, E82, E83, E88, E90, E91, E92, E93, Z...

AutoTecknic - Carbon Competition Fuel Cap Cover - Various BMW and MIN...

Upper Oil Separator Vent Tube

Upper Oil Separator Vent Tube

OEM Rein Oil Separator Vent Hose - E60/61 E90/91 Z4

Billet Upgraded Vacuum Cannisters

BMW Crankcase Pressure Regulator Valve

Air Adjustment Unit/DISA Valve Kit

Bosch Oxygen Sensors - Bank 1 And 2 Pre-Cat - N52

Rein Crankcase Ventilation Hose - Cylinders 1-4

Rein Return Pipe - E39, E46, E53, E60, E83, Z3, Z4

OEM Rein Oil Separator Vent Hose - E60/1 E90/1 N52

Hose - From Oil Separator to Oil Dipstick Tube - E46 E39

Rein Pressure Regulator Valve Repair Kit - E53, E60, E63, E64, E65, E...

Idle Control Valve Kit

Rein Crankcase Ventilation Hose - E39, E46, E60, E83, Z3, Z4 ...

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results