Emissions System for BMW 5 Series E60 (2004-2010)

E82 135i N54, E9X 335 N54, E60 535 Vargas Upgraded PCV Valve ...

2X Entries Into Our F80 M3 Sweepstakes

T#:389684

Part#: VTT-N54-PCV

In Stock

$ 68.99 USD

Add to Wish List

Qty

$ 68.99 USD

Add to Wish List

The crankcase oil vent system on the N52/N54 is one of its weakest and cheaply designed systems. We see crankcase vent issues on even stock engines but with more boost the problems are exponential. This Vargas upgraded PCV valve, and an oil catch can, are what the N54 engine needs and may alleviate most of your oil and boost leak issues. The PCV valve is supposed to let oil either return to the oil pan or pass through the intake manifold and get burned up in the combustion chamber. However, BMW used a weak plastic vent valve that doesn't seal well when under boost. Instead of closing and venting the oil out of the intake, it's forced through this valve and into the intake and coating your valves with oil residue and carbon. Most boost equals more oil forcing its way by. This upgraded N54 PCV valve uses higher grade materials, including aluminum, to provide a better seal and prevent oil from entering the intake. It's an easy install and a must-have item when considering any turbo work.

Show More Show Less

Bav Auto Crankcase Pressure Regulator Valve - BMW M52 M54

10X Entries Into Our F80 M3 Sweepstakes

T#:640207

Part#: 11617501566

In Stock

Sale - Save 20% $ 32.99

This product was last offered at the strikethrough price on
05-03-2026

$ 26.39 USD

Add to Wish List

Qty

Sale - Save 20%

$ 32.99

This product was last offered at the strikethrough price on
05-03-2026

$ 26.39 USD

Add to Wish List

BMW has an ongoing issue with oil separators freezing in cold weather if driving is done before the vehicle is fully warmed up. There is often a howling noise followed by numerous oil leaks. The crankcase breather valve is used to purge the oil vapor from the engine block into the valve cover. However, sometimes condensation can cause it to freeze, causing the entire oil separator system to fail, crack, and disintegrate. Replace this and all the other components of the oil separator system to prevent damage to all the aspects of your engine. As long as you have everything off, you can rest assured that new parts will last and be reliable. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

Show More Show Less

Bav Auto Crankcase Ventilation Return Hose - E46 E39 E60 Z3

10X Entries Into Our F80 M3 Sweepstakes

T#:638072

Part#: 11617504536

In Stock

Sale - Save 20% $ 26.99

This product was last offered at the strikethrough price on
05-03-2026

$ 21.59 USD

Add to Wish List

Qty

Sale - Save 20%

$ 26.99

This product was last offered at the strikethrough price on
05-03-2026

$ 21.59 USD

Add to Wish List

This is the BMW crankcase return line that goes from the intake manifold to the top CCV connecting hose. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

Show More Show Less

Billet Check Valve - 10 Barb

2X Entries Into Our F80 M3 Sweepstakes

T#:597641

Part#: VTT-CHECK-2

Ships in 3 Business Days

$ 36.99 USD

Add to Wish List

Qty

$ 36.99 USD

Add to Wish List

Vargas Turbo has you covered when you are installing a custom turbo setup. With all of the adapters you need and all the valves necessary, the only real limiting factor is your imagination!

BMW N54 3.0L Billet Vaccum Relief Valve

2X Entries Into Our F80 M3 Sweepstakes

T#:597525

Part#: VTT-VAC-RELIEF

Ships in 3 Business Days

$ 104.99 USD

Add to Wish List

Qty

$ 104.99 USD

Add to Wish List

BMW N54 3.0L Billet Vacuum Relief Valve from Vargas Turbo Technologies offers precise control over crankcase vacuum levels. This high-quality billet valve allows users to adjust the vacuum pressure with ease, eliminating guesswork and ensuring optimal engine performance. By simply adding or removing shims, users can tailor the vacuum level to their needs.

Customizable Vacuum Levels: Adjust the vacuum pressure using supplied shims to achieve desired performance.
Direct Fit: Designed with -10ORB threads for easy installation into VTT modular PCV solutions and VTT Modular CNC valve covers.
Versatile Settings: Includes 5 vacuum settings ranging from 10' to 18' of vacuum based on shim configuration.
Enhanced Engine Protection: Helps prevent excessive vacuum that could affect engine seals or cause whistling.

Show More Show Less

Flapper Delete Fitting - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:557962

Part#: VTT-FLAPPER-DELE

Ships on Sep 18, 2026

$ 57.99 USD

Add to Wish List

Qty

$ 57.99 USD

Add to Wish List

Vargas Turbo has you covered when you are installing a custom turbo setup. With all of the adapters you need and all the valves necessary, the only real limiting factor is your imagination!

The VTT PCV Flapper delete is used to get rid of the factory flapper, and add a -10 fitting on N54 powered vehicles. This will allow you to run a single or dual external catch can, or your own custom set up.

This fitting is made from 6061-T6 aircraft aluminum anodized black and comes with O-ring, and a stainless steel holding clip.

This part fits the following BMW engines:
2006-2012 N54

Show More Show Less

Billet 1/2" Check Valve - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:557954

Part#: VTT-CHECK-1

Ships in 2 Business Days

$ 36.99 USD

Add to Wish List

Qty

$ 36.99 USD

Add to Wish List

Vargas Turbo has you covered when you are installing a custom turbo setup. With all of the adapters you need and all the valves necessary, the only real limiting factor is your imagination!

This is a 1/2" (fits -8AN hos perfectly as well) CNC Billet check valve that can be used for a variety of uses including a vacuum/boost check valve when removing the stock PCV system, and still wanting to run the vacuum to the crankcase. Rated at over 100 psi, with a cracking psi of .25psi.

This part fits the following BMW engines:
2006-2012 N54

Show More Show Less

VTT CNC ORB Plug - -10AN

2X Entries Into Our F80 M3 Sweepstakes

T#:642075

Part#: VTT-10ORB

Ships on Sep 18, 2026

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

Vargas Billet Valve Cover And Dual Catch Can Combo Kit - Billet Black...

2X Entries Into Our F80 M3 Sweepstakes

T#:22394048

Part#: VTTN54VCOCCBLK

Ships on Sep 18, 2026

$ 2,129.99 USD

Add to Wish List

Qty

$ 2,129.99 USD

Add to Wish List

This convenient kit from Vargas includes everything you need, saving you the hassle of sourcing specific fittings for your valve cover-catch can setup. Spend less time searching and more time enjoying your upgraded system!

Show More Show Less

FTP Motorsport PCV Valve Upgraded Replacement - N54

T#:583063

Part#: SG84036

Special Order: No Guaranteed ETA

$ 60.00 USD

Add to Wish List

Qty

$ 60.00 USD

Add to Wish List

The OEM plastic PCV valve does not hold pressure well even when brand new. What this means is that when the turbochargers are making boost, pressurized air can become forced backwards through the valve and back into the crankcase. Depending on the condition of your PCV valve this can range from irritating to dangerous as a pressurized case can cause all sorts of issues. Additionally, if your valve cover is cracked due to age or has a bad gasket you are more than likely experiencing a pressure leak either internally or externally. These two features can cause even a low-mileage N54 to run like a tired elephant, sometimes even unlocking a special bonus function known as "Limp Mode". The solution is to replace any failed components and upgrade the PCV valve to something more capable withstanding the abuse of a turbocharged environment. FTP Motorsport has you covered with this solid aluminum valve assembly. It is essentially the same thing that came in your car from the factory, made out of aluminum. The internal components have also been made to fit tighter and outlast the life of an off the shelf replacement. No, this won't be the very last PCV valve you buy, but it will most certainly alleviate a lot of headaches common to N54 owners. And if you're tuned, big twin or single swapped you need one of these yesterday.

Show More Show Less

Bav Auto Upper Oil Separator Vent Tube - E36 E46 E60 E84 Z3 Z4 M54 M5...

10X Entries Into Our F80 M3 Sweepstakes

T#:640502

Part#: 11617504535

In Stock

Sale - Save 20% $ 24.99

This product was last offered at the strikethrough price on
05-03-2026

$ 19.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 24.99

This product was last offered at the strikethrough price on
05-03-2026

$ 19.99 USD

Add to Wish List

Runs from the top of the oil separator up to rear of the intake manifold. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

Show More Show Less

Oil Separator Hose - E46, Z4

10X Entries Into Our F80 M3 Sweepstakes

T#:579880

Part#: 55080

In Stock

Sale - Save 20% $ 24.99

This product was last offered at the strikethrough price on
05-03-2026

$ 19.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 24.99

This product was last offered at the strikethrough price on
05-03-2026

$ 19.99 USD

Add to Wish List

Cold climate version for extra insulation! Fits all E46 and Z4 chassis equipped with an M54 engine.

Air Adjustment Unit/DISA Valve Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15677538

Part#: 11617533344-KT

In Stock

Sale - Save 25% $ 162.99

This product was last offered at the strikethrough price on
05-03-2026

$ 122.12 USD

Add to Wish List

Qty

Sale - Save 25%

$ 162.99

This product was last offered at the strikethrough price on
05-03-2026

$ 122.12 USD

Add to Wish List

A bad DISA valve can cause a variety of issues, from a loud racket in the engine bay, hesitation at low rpm and a rough idle with lean codes. If the valve is making a loud noise, we recommend replacing it as soon as possible. It is possible for the pin holding the flap to be sucked into the motor causing serious damage. Very easy to replace, just need to undo the 4 bolts holding it to the intake manifold. Includes new mounting hardware

Show More Show Less

Bosch Oxygen Sensors - Bank 1 And 2 Pre-Cat - N52

10X Entries Into Our F80 M3 Sweepstakes

T#:56110313

Part#: 11787558055KT

In Stock

$ 307.99

This product was last offered at the strikethrough price on
08-13-2026

$ 304.99 USD

Add to Wish List

Qty

$ 304.99 USD

Add to Wish List

Your engine's air fuel ratio needs to be dead on. Worn out factory pre-cat oxygen sensors delay vital data to the DME, leading to sub optimal fueling, lost horsepower, and dangerous hesitation under load.

Show More Show Less

Crankcase Oil Separator and Vent Hose Kit - E90 325xi/330xi, E60 525x...

10X Entries Into Our F80 M3 Sweepstakes

T#:221962

Part#: TMS221962

Ships in 4 Business Days

$ 458.99 USD

Add to Wish List

Qty

$ 458.99 USD

Add to Wish List

The BMW N52 engine was deisgned with a crankcase vent system that relies on a heated oil separator valve to separate vapor from the liquid oil. Under ideal circumstances, the oil vapor would pass back into the intake and get burned up during normal combustion. The liquid oil would follow a path back down into the oil pan and be reused. This system is environmentally friendly but plagued with problems. The heating elements can fail or oil and carbon particles can block the oil separator valve. With no escape, the oil will continue to pool and collect in the valve cover or make its way into the combustion chamber leading to excessive oil consumption, blue smoke from the exhaust, idle and running issues. These issues are worse in colder climates where the freezing temperatures create an oil sludge condition that is impossible to clear. The plastic hoses can become brittle and crack which leads to vacuum leaks and oil leaks. Thankfully, the CCV is replaceable on the early N52 engines (2006 and some 2007 models) and should be inspected during a major service and any time the valve cover is off. Oil can also back up into the throttle body, which is easier to check than the oil separator itself. Later N52 engines do not have a serviceable oil vent as it is integrated into the valve cover and not a separate part.

This is a kit containing the oil separator, the vent hoses, and the intake manifold gaskets that are done during a typical oil separator replacement. Complete kit includes:

11617531423, Genuine BMW oil separator

11617559530, vent hose

11157522931, oil separator hose

11157567801, return hose

11157537701, extraction hose

11617547242, intake manifold gaskets (set of 6)
The intake manifold must be removed to access the oil separator so new profile gaskets are included. We also recommend (but not required) a new oil separator fitting on the intake manifold because it's one of the heated elements that vaporizes the oil as it enters the intake.

The oil separator can be replaced on its own but for a complete service we also recommend replacing the oil separator hoses and cleaning the valve cover. Any valve cover or intake manifold work should include a new oil separator valve.

This kit fits the following BMWs:
-10/2005 E90 BMW 325xi 330xi - Sedan
-10/2005 E91 BMW 325xi - Wagon
-10/2005 E60 BMW 525xi 530xi

Show More Show Less

PCV Adapter Fitting N54

2X Entries Into Our F80 M3 Sweepstakes

T#:557961

Part#: VTT-PCV-ADAPTER

Ships on Sep 18, 2026

$ 145.99 USD

Add to Wish List

Qty

$ 145.99 USD

Add to Wish List

Vargas Turbo has you covered when you are installing a custom turbo setup. With all of the adapters you need and all the valves necessary, the only real limiting factor is your imagination!

This is the adapter fitting that is required to convert your N54 to external PCV if you want to keep your crankcase under vacuum at idle, and anytime you have a vacuum condition in your intake manifold. They are made from 6061-T6 with black anodizing for a long-lasting finish. Includes complete adapter, with all o-rings, and retaining clip.

This must be used in conjunction with the Vargas billet check valve, and PCV delete fitting or requires plugging of the intake PCV ports. Installs inline on the throttle body, and adds a -8AN male to adapt to a catch cans, or any custom set up.

Made from 6061-T6 with black anodizing for a long-lasting finish. Includes complete adapter, with all o-rings, and retaining clip

This part fits the following BMW engines:
2006-2012 N54

Show More Show Less

Oil Separator Vent Hose

T#:57725199

Part#: 11617522933

Ships in 9 Business Days

$ 13.99 USD

Add to Wish List

Qty

$ 13.99 USD

Add to Wish List

The Burgaflex Oil Separator Vent Hose is built to high engineering standards to withstand the harsh thermal environments of a hard-driven engine bay.

Burgaflex Crankcase Vent Hose - Vent Valve to Oil Dip Stick Tube - E3...

T#:596606

Part#: 11157532649

Ships in 9 Business Days

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

Maintain peak engine health and precise air-fuel control by replacing your worn or cracked factory breather assembly with a premium Burgaflex replacement.

Burgaflex Crankcase Vent Pipe - Return Pipe from Connecting Hose - E3...

T#:596611

Part#: 11617504536

Ships in 9 Business Days

$ 13.99 USD

Add to Wish List

Qty

$ 13.99 USD

Add to Wish List

Keep your vehicle running crisp and leak-free with this premium return pipe manufactured by Burgaflex.

Crankcase Ventilation Hose

For vehicles with a production date from 11/2006+

T#:2721004

Part#: 11617563477

Ships in 9 Business Days

$ 65.99 USD

Add to Wish List

Qty

$ 65.99 USD

Add to Wish List

Maintain peak output and protect your vehicle from engine-robbing vacuum leaks with a high-performance replacement crankcase ventilation hose from Burgaflex.