Mishimoto Oiling System for BMW 5 Series E60 (2004-2010)

Large Aluminum Oil Catch Can

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:597051

Part#: MMOCCLA

In Stock

$ 127.99 USD

Add to Wish List

Qty

$ 127.99 USD

Add to Wish List

WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Mishimoto Universal Catch Can Kit - Carbon Fiber

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:372557

Part#: MMOCCCF

In Stock

$ 162.99 USD

Add to Wish List

Qty

$ 162.99 USD

Add to Wish List

Universal kit with a catch can and rubber hose; for retrofitting on a variety of vehicles. Carbon fiber catch can prevents a harmful buildup of oil inside of the turbocharger, intake manifold, intercooler and piping. Separates oil particles from PCV/CCV air Defends intercooler, intake system, and essential components from oil blow-by Made from lightweight carbon fiber Compact design makes for easy engine bay placement Checking fluid levels made easy with built in sight tube Comes complete with mounting bracket, hose, all necessary clamps, fittings, and mounting hardware Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Mishimoto 19 Row Universal Oil Cooler

For custom applications only. Not a direct bolt on.

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:378414

Part#: MMOCUL

In Stock at Vendor

$ 536.99 USD

Add to Wish List

Qty

$ 536.99 USD

Add to Wish List

Even under optimum driving conditions increased oil temperatures will cause a drop in pressure and will decrease the ability for your engine to be properly lubricated. With this new oil cooler, you can keep your oil temperatures down for optimum driving conditions. The kit includes four-feet of stainless braided line, adapter fittings, and oil filter sandwich adapter. Rows: 19 Overall Dimensions: 13" x 5.5" x 2" Core Dimensions: 11.25" x 5.5" x 2" Braided Hoses: 4ft .75 inch & 4ft 9 inch Braided Hose Fittings: -10AN Sandwich Plate Fittings: -10AN WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Mishimoto Universal 10 Row Oil Cooler

For custom applications only. Not a direct bolt on.

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:378421

Part#: MMOCU

In Stock at Vendor

$ 410.99 USD

Add to Wish List

Qty

$ 410.99 USD

Add to Wish List

This universal oil cooler from Mishimoto is far superior to the factory unit with its 11" x 2.76" x 1.97" core. Even under optimum driving conditions increased oil temperatures will cause a drop in pressure and will decrease the ability for your engine to be properly lubricated. With this new oil cooler, you can keep your oil temperatures down for optimum driving conditions. The kit includes 4 feet of stainless braided line, adapter fittings, and oil filter sandwich adapter. Mishimoto Automotive is a leading manufacturer of aftermarket performance cooling products. The company was established back in 2003 with one goal. That goal was to provide customers with quality cooling system upgrades that work on the track and on the road. At Mishimoto, you never have to worry about the quality of the product you are installing. This kit is universal and is not a direct bolt on. *For custom applications only. Not a direct bolt on. WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

N54 Mishimoto Baffled Oil Catch Can

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:383384

Part#: MMBCCN5406CBE

In Stock

$ 253.99 USD

Add to Wish List

Qty

$ 253.99 USD

Add to Wish List

Oil venting and circulation continues to be a problem on BMW engines and now even more so on the turbocharged N54 and N55 engines. The existing stock system does a very poor job of separating fluid and vapor and this leads to an oily film or even small pools of oil throughout the turbos and intake. We're seeing a lot more 135 and 335 cars with drivability and performance issues because oil has sneaked by the ring seals and is coating the intake piping, intercooler, intake valves, and other critical areas. The problem is worsened with higher boost levels. Oil is excellent for lubricating moving parts but terrible when it gets into the combustion chamber, effectively lowering the octane rating and reducing performance. Our own shop has gone the extra step and offers media and chemical blasting of the intake valves to strip away the oily buildup we have seen. Our shop also strongly recommends an oil catch can be installed in the line for the crankcase vent. The oil catch can traps oil as it leaves the valve cover and holds it in a canister. This catch can is located on the cooler side of the engine where the oil will condense easier and stay in the can. Whatever minimal vapors are left over in the oil is then vented back through the canister and into the intake where it is safe to be burned up in the engine or recirculated back through the system again. This is the way the system was designed! At each oil change simply unscrew the canister and empty the trapped oil with your regular used oil. Installing one of these will avoid costly repairs in the future and help maintain your boost and performance. It's one of the smartest modifications you can make because it demonstrates a well-thought out tuning strategy and care for the condition of your engine. The Mishimoto Oil Catch Can is made from aluminum and with a stealthy black anodized finish. It installs on the cooler side of the engine with a dedicated bracket and new oversized vent lines. The location is key as heat will evaporate the oil and send too much vapor back into the engine (where cooler air will turn it back into fluid). Note: Since the crankcase vent system is considered part of the overall emissions system, installing this may be a violation of local, state, and federal laws. While exemptions are made for track/race and off-road use, check with your local state inspection facility on using this in street-driven vehicles. This item fits the following BMWs with the N54 twin-turbo engine: 2008-2010 E82 E88 BMW 135i 2007-2010 E9X BMW 335i 335xi 2006-2010 E60 BMW 535i 535xi WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

BMW Two Port Universal Catch Can - Black

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:23020165

Part#: MMBCC-CBTWO

In Stock

$ 160.99 USD

Add to Wish List

Qty

$ 160.99 USD

Add to Wish List

Optimize your vehicle's performance and shield crucial components with the Mishimoto Compact 2-Port Baffled Oil Catch Can. This innovative solution effectively separates oil particles from PCV/CCV air using a 50-micron bronze filter, ensuring defense against oil blow-by for your intercooler, intake system, and vital parts. Constructed with a patented billet 6061 aluminum can sealed with Viton™ O-Rings, this catch can guarantees both durability and effectiveness.

Equipped with a universal mounting bracket, it allows adaptable installation and comes complete with two CNC-machined aluminum 1/2" barbed hose fittings. With an enhanced 3 oz internal capacity, service intervals are prolonged, while its fully serviceable filter and can ensure enduring functionality.

Engineered for safety in pressurized applications, the internal air diverter enhances oil separation by amplifying air turbulence. Available in black, red, or polished finishes, this catch can preserves proper octane levels, reducing potential detonation and promoting extended engine life.

The product package includes the Compact 2-Port Baffled Oil Catch Can, two Aluminum 1/2" Barbed Fittings, and a Universal Mounting Bracket, all backed by the Mishimoto Lifetime Warranty.

WARNING! Prop 65 may apply to this product.

Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to all companies selling products in California.

Prop 65 mandates listing any chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm.

For more information about California Prop 65 warning, visit: www.P65Warnings.ca.gov.

Show More Show Less

Mishimoto Performance Oil Cooler - E60 M5, E63/64 M6 S85 5.0L ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5282875

Part#: MMOC-E60-06

In Stock at Vendor

$ 714.99 USD

Add to Wish List

Qty

$ 714.99 USD

Add to Wish List

After over a decade of use, some of the E60 M5 & E63/64 M6 components have begun to show their age. The factory engine oil cooler is a common leak point on the E60, typically from failed O-rings or cracked weld points. In addition, the location of the front-mounted cooler increases the chance of damage from road debris and general clogging of external fins, resulting in reduced cooling efficiency. That, combined with the high-strung engine and hefty chassis, means oil temperatures tend to rise during aggressive driving. That's why Mishimoto's engineering team set out to remedy both issues with this performance oil cooler. Drawing on their vast experience with BMWs and the latest in engineering tools, Mishimoto's team was able to create a direct-fit replacement oil cooler with substantial improvements in both durability and cooling efficiency. The Mishimoto Performance Oil Cooler features a robust bar-and-plate core, which provides improved durability and aids in heat rejection. The core utilizes a strategic fin design which provides a 41% increase in external fin surface area and a 30% increase in internal fin surface area to help draw heat out of the oil and dissipate it into the air. This oil cooler features CNC-machined inlet/outlet ports and includes new OEM O-rings for a seamless and leak-free installation. This cooler is finished in a silver powder coat, ensuring long-term durability and corrosion resistance. And, as with all BMW performance products, this oil cooler includes the signature Mishimoto Lifetime Warranty. Fits 2006-2010 BMW E60 M5 / E63 M6 / E64 M6* (*Requires minor trimming of plastic OEM oil cooler shrouding) Replaces failure-prone factory oil cooler and provides improved cooling performance 40.3% increase in core volume for efficient cooling Robust bar-and-plate core provides improved pressure tolerance and durability 41% increase in external fin surface area for improved heat transfer 30% increase in internal fin surface area draws heat out of oil quickly and efficiently CNC-machined inlet/outlet mates perfectly with stock oil cooler lines Includes OEM oil line O-rings Durable silver powder coated finish provides optimal corrosion resistance Patent Pending Mishimoto Lifetime Warranty Included: Mishimoto Performance Oil Cooler Oil Line O-rings Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Project Cars

SELECT YOUR BMW

Mishimoto Oiling System for BMW 5 Series E60 (2004-2010)

Sub-Categories

Large Aluminum Oil Catch Can

Mishimoto Universal Catch Can Kit - Carbon Fiber

Mishimoto 19 Row Universal Oil Cooler

Mishimoto Universal 10 Row Oil Cooler

N54 Mishimoto Baffled Oil Catch Can

BMW Two Port Universal Catch Can - Black

Mishimoto Performance Oil Cooler - E60 M5, E63/64 M6 S85 5.0L ...

Select Vehicle

Category

Brand

Price

Shipping

Narrow Results