BMW Suspension Parts for BMW 5 Series E60 (2004-2010)

Clear BMW chassis

Please ensure your correct model is selected

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

Bilstein - Corporate Logo
T#:201427
Part#: 49-234923
In Stock
31% off MSRP $ 5,345.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 3,699.00 USD
Free Shipping
31% off MSRP
$ 5,345.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 3,699.00 USD
Free Shipping
This Bilstein B16 suspension kit allows you to lower your EDC equipped E60 M5 while maintaining all the factory EDC functions. Finally, you can improve the handling of your car will still retaining the ability to choose your suspension stiffness on the fly with the factory EDC system! This suspension kit allows adjustable lowering of the car from 15mm up to 35mm.

The factory BMW EDC (Electronic Damping Control) system uses an electronic control module wired to each shock absorber to vary the stiffness of the shock with a push of a button on the center console. You can leave it in Comfort for around-town running and instantly get a tighter and more responsive suspension for twisty country roads. The Comfort setting is also dynamic - sensing road characteristics and g-forces to instantaneously firm the suspension when you're pushing the car. This is the ultimate E60 suspension!

The basic kit is a Bilstein PSS system with true coil over front struts, rear shocks, four springs, height adjusters that plug directy into the factory EDC system.. The front struts are zinc coated for superior corrosion resistance. The system installs just like a normal suspension and uses the factory original mounts. Installation instructions included but professional installation is strongly recommended. This kit is TUV certified and a limited lifetime warranty.

This coilover kit fits the following BMWs:
2006-2010 E60 BMW M5
Show More Show Less
Bilstein - Corporate Logo
T#:1894
Part#: GM5-D549
Special Order: No Guaranteed ETA
$ 2,119.00 USD
Free Shipping
$ 2,119.00 USD
Free Shipping
The B16 PSS10 coilovers offer a stiffer spring rate than stock and a lower ride height for less bodyroll and better handling. These are among the easiest coil over kits on the market - no special mounts required (works with stock mounts and sway bar links), larger adjustment knob allows for easy shock damping changes, and coil over spanner wrenches included for easy height changes. Bilstein backs up their technology with a limited lifetime warranty. TUV approved for fitment, safety, and quality! Bilstein's monotube shock dampers in the PSS10 offer 9 precise settings for compression and rebound. A new setting is just a click away, allowing you to set a ride and handling combination that works for your setting. Instead of offering too many shock settings that you're never going to use, Bilstein has chosen ten optimal damping curves from a smooth street setting (P9) to an ultra-stiff track-only setup (P1). Shock changes are made from an easy-to-use over-sized adjuster knob. Ride height adjustments are done from perches that ride on each shock body, which are zinc coated for excellent wear and corrosion resistance. You can set the ride height between 0.5 to 1.3 inches lower than stock ride height. Springs are progressively rated so their initial compression rating is quite soft and then becomes stiffer as the spring compresses. These are stiffer than most coil over kit manufacturers and the results of Bilstein's extensive testing on the German Nurgburgring and Autobahn. The fitment of these is just like a standard shock and spring package. The front struts and rear shocks are compatible with the stock strut and shock mounts. You can re-use your own or choose a mount with additional features. Because the Bilstein design keeps the sway bar tab in the original location, you can re-use the stock sway bar links. Using the stock mounts keeps the cost and complexity down and allows for TUV certification. You can also be assured of the stock mount's quiet and long-lasting performance. The assembly of the front strut is the same as a the factory strut. In the rear, ride height is made by an adjustable spring perch that sits under the rear spring. Install instructions and diagrams included. If you're looking for a supremely capable and high quality suspension, then look no further than the Bilstein PSS10. It combines all of the best German engineering with real-world development, and a lifetime warranty. Fitment note: this system works only on cars not equipped with the factory EDC electronically adjustable shocks. Featuring: Largest available piston diameter for greater sensitivity and precise control. Patented digressive piston head design and deflective valving instantly reacts to changing road conditions. 9-way adjustable dampening knobs that "click" from soft to hard with no tools or jacking required. Monotube design dissipates heat more effectively than a twin tube shock for cooler, more efficient operation and longer life. Weather resistant coating to resist oxidization, and ensure long life. Lighter weight reduces wear and tear on suspension components. Wrenches to adjust front and rear ride height included! This coilover kit fits the following BMWs: 2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i
Show More Show Less
Bilstein - Corporate Logo
T#:12155
Part#: HE5-B116
In Stock
$ 1,419.00 USD
Free Shipping
$ 1,419.00 USD
Free Shipping

The Bilstein B14 PSS Suspension allows adjustable vehicle ride height without the expense of a fully adjustable damping system. This system features both coilover and standard mono-tube gas pressure shock or struts with performance level valving for application specific, progressive rate coil springs.
The product benefits at a glance:

  • Threaded body adjustable range of 20 mm
  • Lowering of approx. 30-50 mm at front and rear
  • Road-tested and fine-tuned by BILSTEIN ride engineers, under extreme motorsports conditions
  • Aluminum Spring plates and lock nuts
  • Surface coating using Triple-C-Technology for long-lasting corrosion resistance
  • Round threads for easy adjustment
  • Quality sport springs made from highly durable material
  • Gas pressure technology

BILSTEIN monotube technology, made in Germany

adj. -1.0"-1.75" / adj. -1.0"-1.75"

Not for cars with EDC

This coilover kit fits the following BMWs:
2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i

Show More Show Less

Bilstein - Corporate Logo
T#:346259
Part#: 46-181206
Ships in 4 Business Days
$ 1,139.00 USD
$ 1,139.00 USD

Bilstein has teamed up with Eibach to offer matched shock and spring packages. These Eibach springs are mated to a special set of Bilstein shocks to deliver a sporty and taut ride with as little impact on ride comfort as possible.

The Sportline kit uses an Eibach Sportline spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach Sportline springs are more aggressive than Pro-Kit springs, which tend to be softer overall than most other aftermarket springs, but still ensures ride quality stays close to stock comfort while still giving you a much more aggressive lowered stance and significantly improved handling. 

Bilstein B12 Features: 

  • Quick response and precise handling
  • Springs and shocks road tested and fine-tuned to complement one another
  • Bilstein Monotube/Inverted gas pressure technology
  • TUV certified
  • Made In Germany
  • Average Lowering of 30 to 60mm

Most cars don't need coil overs to improve their handling and bodyroll. For most drivers, simply replacing the shocks and springs with performance versions will meet their goals. If your shocks need replacing, and you felt the handling could be improved a little bit, this is an excellent performance suspension for you.

This item fits the following BMWs:
2004-2010 E60 BMW 545i 550i

Show More Show Less

B12 Pro-Kit Suspension System - E60 525/530
For vehicles without electronic or self leveling suspension
Bilstein - Corporate Logo
T#:346258
Part#: 46-181190
Special Order: No Guaranteed ETA
$ 1,139.00 USD
Free Shipping
$ 1,139.00 USD
Free Shipping
The Pro Kit uses an Eibach Pro Kit spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach springs tend to be softer overall than most other aftermarket springs, which ensures the ride stays close to a stock comfort while still giving you a lowered stance and improved handling.
Show More Show Less
Bilstein - Corporate Logo
T#:1702
Part#: 19101X
In Stock
$ 22.03 USD
Free Shipping on orders $49 and up
Bilstein Coil Over wrench set for some PSS, PSS9 and PSS10 kits. Consists of a Large wrench and a Small wrench for adjusting the spring perch (76.25mm) and lock ring (75.75mm) on coil overs that require the rectangular notch style head (not round pin style adjuster). Can also be used with other coil over kits (H&R, Moton, JRZ, etc).
Show More Show Less

Bilstein - Corporate Logo
T#:344302
Part#: 12-248940
In Stock
$ 58.00 USD
Free Shipping
$ 58.00 USD
Free Shipping
Complete front strut mount with bearing and retaining hardware
KMAC - Corporate Logo
T#:389645
Part#: 192416-1J
In Stock
$ 380.00 USD
Free Shipping
$ 380.00 USD
Free Shipping
Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less

Bilstein - Corporate Logo
T#:201425
Part#: 31-231299
In Stock
$ 649.00 USD
Free Shipping
$ 649.00 USD
Free Shipping
Position: Front Setting: Performance, for stock suspensions The Bilstein B6 Performance Shock is designed for use with stock springs. They are typically about 20% firmer than the original shock, improving body roll, brake dive, and overall handling. These shocks provide improved handling and stability without sacrificing ride comfort. DampTronic B6 Performance shocks and struts are intended to be used with OE springs, allowing you to upgrade your rides performance while retaining factory electronic suspension and controls. Bilstein recommends B8 Performance Plus shocks and struts when lowering a vehicle with lowering springs. This Performance Front shock fits the following BMWs: 2006-2010 E60 BMW M5 - only for cars with EDC
Show More Show Less

Bilstein - Corporate Logo
T#:2491
Part#: VE3-A963-H0
In Stock
$ 299.00 USD
Free Shipping
$ 299.00 USD
Free Shipping
Position: Front, left or right
Setting: Performance, for stock suspensions

Front Bilstein B6 Performance shock. Performance shocks are for cars with the standard, factory suspension. They are typically about 20% firmer than the original shock, improving body roll, brake dive, and overall handling. Includes top nut. Price is per shock.

This Bilstein B6 Performance Front shock fits the following BMWs:
2004-2009 E60 525i, 528i, 530i, 535i, 545i, 550i
Show More Show Less
B4 Front Strut Assembly - Priced each
For vehicles without M-Sport suspension
Bilstein - Corporate Logo
T#:344223
Part#: 22-138361
In Stock
$ 151.00 USD
Free Shipping
$ 151.00 USD
Free Shipping
Bilstein B4 OE Replacement Series gas pressure shocks and struts are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.
Show More Show Less
Bilstein - Corporate Logo
T#:2489
Part#: BE5-A964-H2
In Stock
$ 175.00 USD
Free Shipping
$ 175.00 USD
Free Shipping
Position: Rear, left or right
Setting: Performance, for stock suspensions

Rear Bilstein B6 Performance shock. Performance shocks are for cars with the standard, factory suspension. They are typically about 20% firmer than the original shock, improving body roll, brake dive, and overall handling. Includes top nut, stock dust boot is re-used. Price is per shock.

This Bilstein B6 Performance rear shock fits the following BMWs:
2004-2009 E60 525i, 528i, 530i, 535i, 545i, 550i
Show More Show Less


Bilstein - Corporate Logo
T#:344729
Part#: 22-230867
In Stock
$ 193.00 USD
Free Shipping
$ 193.00 USD
Free Shipping
Bilstein B4 OE Replacement Series gas pressure shocks and struts are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.
Show More Show Less
Bilstein - Corporate Logo
T#:344730
Part#: 22-230874
In Stock
$ 193.00 USD
Free Shipping
$ 193.00 USD
Free Shipping
Bilstein B4 OE Replacement Series gas pressure shocks and struts are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.
Show More Show Less
Bilstein - Corporate Logo
T#:5313
Part#: BE5-E178-H0
In Stock
$ 199.00 USD
Free Shipping
$ 199.00 USD
Free Shipping
Position: Rear, left or right
Setting: Performance, for stock suspensions

Rear Bilstein B6 Performance shock. Performance shocks are for cars with the standard, factory suspension. They are typically about 20% firmer than the original shock, improving body roll, brake dive, and overall handling. Includes top nut, stock dust boot is re-used. Price is per shock.

This Bilstein B6 Performance​ rear shock fits the following BMWs:
2004-2010 E60 BMW 525xi 530xi 528xi 528i xDrive 535xi 535i xDrive - Sedan
not for cars with self-leveling or EDC suspension.
Show More Show Less

Bilstein - Corporate Logo
T#:201426
Part#: 26-231303
In Stock
$ 409.00 USD
Free Shipping
$ 409.00 USD
Free Shipping
Position: Rear Setting: Performance, for stock suspensions The Bilstein B6 Performance Shock is designed for use with stock springs. They are typically about 20% firmer than the original shock, improving body roll, brake dive, and overall handling. These shocks provide improved handling and stability without sacrificing ride comfort. DampTronic B6 Performance shocks and struts are intended to be used with OE springs, allowing you to upgrade your rides performance while retaining factory electronic suspension and controls. Bilstein recommends B8 Performance Plus shocks and struts when lowering a vehicle with lowering springs. This Performance Front shock fits the following BMWs: BMW M5 2010-2006
Show More Show Less

Bilstein - Corporate Logo
T#:2490
Part#: BE5-A966-H2
In Stock at Vendor
33% off MSRP $ 260.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 175.00 USD
Free Shipping
33% off MSRP
$ 260.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 175.00 USD
Free Shipping
Position: Rear, Left or Right
Setting: Sport, for lowered suspensions

Rear Bilstein B8 Performance Plus shock. Sport shocks are for cars lowered from the factory ride height and are about 20% stiffer than the factory shocks. Sport shocks work great with lowering springs such as H&R or Eibach. Includes top nut, stock dust boot is re-used. Price is per shock.

This Bilstein Sport Rear Shock fits the following BMWs:
2004-2009 E60 525i, 528i, 530i, 535i, 545i, 550i
Show More Show Less
E60 B4 Rear Shock Absorber - Priced Each
For vehicles with M-Sport suspension
Bilstein - Corporate Logo
T#:344259
Part#: 19-212722
In Stock
$ 139.00 USD
Free Shipping
$ 139.00 USD
Free Shipping
Bilstein B4 OE Replacement Series gas pressure shocks and struts are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.
Show More Show Less

Bilstein - Corporate Logo
T#:2288
Part#: VE3-A965-H1
Ships in 4 Business Days
$ 319.00 USD
Free Shipping
$ 319.00 USD
Free Shipping
Position: Front, Left or Right
Setting: Performance, for lowered suspensions

Front Bilstein B6 Performance shock. Performance shocks are for cars lowered from the factory ride height and are about 20% stiffer than the factory shocks.  Includes top nut. Price is per shock.

This Bilstein B6 Performance   shock fits the following BMWs:
2004-2009 E60 525i, 528i, 530i, 535i, 545i, 550i
2004-2006 E63 E64 645ci, 645ci Convertible, 650i, 650i Convertible
Show More Show Less
Bilstein - Corporate Logo
T#:344492
Part#: 19-230887
In Stock at Vendor
$ 149.00 USD
Free Shipping
$ 149.00 USD
Free Shipping
Bilstein B4 OE Replacement Series gas pressure shocks and struts are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.
Show More Show Less

BMW E60 Bilstein B4 Front Strut Assembly - Each
For vehicles with Sport suspension
Bilstein - Corporate Logo
T#:344695
Part#: 22-212696
Ships in 3 Business Days
$ 169.00 USD
Free Shipping
$ 169.00 USD
Free Shipping
Bilstein B4 OE Replacement Series gas pressure shocks and struts are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.
Show More Show Less

KMAC - Corporate Logo
T#:31522921
Part#: 193616-6H
Ships on Aug 17, 2026
$ 320.00 USD
Free Shipping on orders $49 and up
Bilstein - Corporate Logo
T#:5316
Part#: 35-141808
In Stock
$ 339.00 USD
Free Shipping
$ 339.00 USD
Free Shipping
Position: Front, Right
Setting: Sport, for lowered suspensions

Front Bilstein B8 Performance Plus shock. Sport shocks are for cars lowered from the factory ride height and are about 20% stiffer than the factory shocks. Sport shocks work great with lowering springs such as H&R or Eibach. Includes top nut. Price is per shock.

This Bilstein Front shock fits the following BMWs:
2004-2010 E60 BMW 525xi 530xi 528xi 528i xDrive 535xi 535i xDrive - Sedan & Wagon
not for cars with self-leveling or EDC suspension.
Show More Show Less
Bilstein - Corporate Logo
T#:2289
Part#: VE3-E176
Ships in 4 Business Days
$ 329.00 USD
Free Shipping
$ 329.00 USD
Free Shipping
Position: Front left
Setting: Performance, for stock suspensions

Front Bilstein B6 Performance shock. Performance shocks are for cars with the standard, factory suspension. They are typically about 20% firmer than the original shock, improving body roll, brake dive, and overall handling. Includes top nut. Price is per shock.

This Bilstein B6 Performance​ Front shock fits the following BMWs:
2004-2009 E60 525xi, 528xi, 530xi, 535xi, 528i xDrive, 535i xDrive
Show More Show Less


Bilstein - Corporate Logo
T#:5314
Part#: 35-141792
In Stock
$ 339.00 USD
Free Shipping
$ 339.00 USD
Free Shipping
Position: Front, Left
Setting: Sport, for lowered suspensions

Front Bilstein B8 Performance Plus shock. Sport shocks are for cars lowered from the factory ride height and are about 20% stiffer than the factory shocks. Sport shocks work great with lowering springs such as H&R or Eibach. Includes top nut. Price is per shock.

This Bilstein Front shock fits the following BMWs:
2004-2010 E60 BMW 525xi 530xi 528xi 528i xDrive 535xi 535i xDrive - Sedan & Wagon
not for cars with self-leveling or EDC suspension.
Show More Show Less
Bilstein - Corporate Logo
T#:2290
Part#: VE3-E177
In Stock at Vendor
33% off MSRP $ 490.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 329.00 USD
Free Shipping
33% off MSRP
$ 490.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 329.00 USD
Free Shipping
Position: Front right
Setting: Performance, for stock suspensions

Front Bilstein B6 Performance shock. Performance shocks are for cars with the standard, factory suspension. They are typically about 20% firmer than the original shock, improving body roll, brake dive, and overall handling. Includes top nut. Price is per shock.

This Bilstein B6 Performance Front shock fits the following BMWs:
2004-2009 E60 525xi, 528xi, 530xi, 535xi, 528i xDrive, 535i xDrive
Show More Show Less
Bilstein - Corporate Logo
T#:384722
Part#: 31-231299KT
In Stock
$ 2,116.00 USD
Free Shipping
$ 2,116.00 USD
Free Shipping

Bilstein B6 Performance Shock/Strut Package for Stock Springs

Upgrade your BMW's suspension with the Bilstein B6 Performance shock/strut package, specifically designed for stock springs. This package includes:

  • 2 front Bilstein B6 Performance shocks
  • 2 rear Bilstein B6 Performance shocks
  • Top nuts and rear lower shock washers

Compatible with stock rear dust boots, these shocks provide improved handling, stability, and safety without compromising ride comfort. The DampTronic B6 Performance shocks are ideal for maintaining factory electronic suspension.

Features and Benefits:

  • Monotube gas pressure construction
  • Improved safety and sportiness
  • Enhanced traction and stability
  • Increased durability while maintaining ride comfort
  • Road-tested and fine-tuned by BILSTEIN for specific applications
  • Limited lifetime warranty*

*Bilstein offers a limited lifetime warranty for defects in material and workmanship. Contact Turner Motorsport for warranty details.

Show More Show Less

Bilstein - Corporate Logo
T#:1468
Part#: E60SPSET
Ships in 4 Business Days
$ 988.00 USD
Free Shipping
$ 988.00 USD
Free Shipping
For Sport/lowered springs; Set = 2 front + 2 rear. Will not work on cars with electronic or self leveling suspensions. Bilstein Sport Shocks offer a firmer ride quality than standard Heavy Duty (HD) shocks, these are designed for lowered vehicles and sport applications. For the performance minded driver, Sport shocks deliver absolute mastery of the road surface!

This item fits the following BMWs:
2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i
Show More Show Less

Bilstein - Corporate Logo
T#:403283
Part#: 22-230874KT
In Stock at Vendor
$ 684.00

This product was last offered at the strikethrough price on
05-19-2026

$ 652.00 USD
Free Shipping
$ 652.00 USD
Free Shipping

Bilstein strut/shock package for stock springs. Set includes 2 front Bilstein B4 OE Replacement struts and 2 rear Bilstein B4 OE Replacement shocks. Bilstein B4 Series gas pressure shocks and struts are specifically designed to be the economical choice for replacing the dampers on your vehicle. The B4 Series shocks and struts are rigorously engineered to meet OE standards and identically replicate the original ride quality of your vehicle. Shock dampening and rebound is set to match the original specifications from the factory to retain the same handling, stability, and ride comfort, but with the superior Bilstein quality for a long life and consistent performance in every condition. Lifetime warranty!

This item fits the following BMWs:
2003-2010 E60 BMW xi models

Show More Show Less
Bilstein - Corporate Logo
T#:22140
Part#: 46-181121
Ships in 4 Business Days
$ 1,139.00 USD
Free Shipping
$ 1,139.00 USD
Free Shipping

Bilstein has teamed up with Eibach to offer matched shock and spring packages. These Eibach springs are mated to a special set of Bilstein shocks to deliver a sporty and taut ride with as little impact on ride comfort as possible.

The Pro Kit uses an Eibach Pro Kit spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach springs tend to be softer overall than most other aftermarket springs, which ensures the ride stays close to a stock comfort while still giving you a lowered stance and improved handling. 

Bilstein B12 Features: 

  • Precise response and excellent driving performance
  • Springs and shocks road tested and fine-tuned to complement one another
  • Bilstein Monotube/Inverted gas pressure technology
  • TUV certified
  • Made In Germany
  • Average Lowering of 25 to 40mm

Most cars don't need coil overs to improve their handling and bodyroll. For most drivers, simply replacing the shocks and springs with performance versions will meet their goals. If your shocks need replacing, and you felt the handling could be improved a little bit, this is an excellent performance suspension for you.

This item fits the following BMWs:
2004-2010 E60 BMW 545i 550i

Show More Show Less

KMAC - Corporate Logo
T#:389646
Part#: 192416-3L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 3 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less
KMAC - Corporate Logo
T#:389668
Part#: 193726J
Special Order: No Guaranteed ETA
$ 380.00 USD
Free Shipping
$ 380.00 USD
Free Shipping
Perfect for lowered cars that need to dial out negative camber to preserve tires. Also perfect for track cars - easily dial in toe and camber for the track for better handling. Priced per set. Fits BMW E60 E63 E65.

This item fits the following BMWs:
2004-2010  E60 BMW  525i 525xi 528i 528xi 530i 530xi 535i 535xi 545i 550i M5
2004+  E63 BMW  645ci 650i M6
2002-2008  E65 BMW  745i 745li 750i 750li 760i 760li
2000-2006  E53 BMW  X5 3.0i, X5 4.4i, X5 4.6is, X5 4.8is
Show More Show Less

KMAC - Corporate Logo
T#:389317
Part#: 193616-2L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Street/Track, Stage 2
Bearing: PTFE-lined pillow-ball with thin polyurethane bushing

The Stage 2 KMAC plates are a mixed street/track camber/caster plate meant to be used in a variety of suspensions. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions. Bearing inserts and adapters included. The Stage 2 camber plates are shorter than a factory mount so may not be suitable for cars will little suspension travel. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2006-2008  E85 BMW  Z4 M Roadster M Coupe
Show More Show Less

KMAC - Corporate Logo
T#:389647
Part#: 192416-2L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 2 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less
KMAC - Corporate Logo
T#:389662
Part#: 193616-3L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Track, Stage 3
Bearing: PTFE-lined pillow-ball, no bushing

KMAC Stage 3 camber/caster plates are designed for track or race-only situations where comfort and noise are not the primary concerns. The Stage 3 camber plates use a pillowball bearing, solidly mounted within the camber plate for direct alignment of the strut shaft and no excess play or deflection. Stage 3 are designed to increase negative camber with their patented 'floating' adjustment that changes camber and caster together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Fitment is limited to race-only small diameter coil-over springs (not stock-type). Bearing inserts and adapters included. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
1997-2003  E39 BMW  525i 528i 530i 540i (for cars with EDC)
1999-2003  E39 BMW  M5
1995-2001  E38 BMW  740i 740il 750il (for cars with EDC)
2004-2010  E60 BMW  M5
2004-2011  E63 BMW  M6
Show More Show Less
Bilstein - Corporate Logo
T#:1467
Part#: E60HDSET
Ships on Sep 1, 2026
$ 1,099.99

This product was last offered at the strikethrough price on
07-08-2026

$ 948.00 USD
Free Shipping
$ 948.00 USD
Free Shipping
For stock springs; Set = 2 front + 2 rear. Will not work on cars with electronic or self leveling suspensions. The Bilstein Heavy Duty (HD) Shock is designed for use with stock springs. These shocks provide improved handling and stability without sacrificing ride comfort.

This item fits the following BMWs:
2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i
Show More Show Less


Bilstein - Corporate Logo
T#:22139
Part#: 46-181107
Special Order: No Guaranteed ETA
$ 1,139.00 USD
Free Shipping
$ 1,139.00 USD
Free Shipping

Bilstein has teamed up with Eibach to offer matched shock and spring packages. These Eibach springs are mated to a special set of Bilstein shocks to deliver a sporty and taut ride with as little impact on ride comfort as possible.

The Pro Kit uses an Eibach Pro Kit spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach springs tend to be softer overall than most other aftermarket springs, which ensures the ride stays close to a stock comfort while still giving you a lowered stance and improved handling. 

Bilstein B12 Features: 

  • Precise response and excellent driving performance
  • Springs and shocks road tested and fine-tuned to complement one another
  • Bilstein Monotube/Inverted gas pressure technology
  • TUV certified
  • Made In Germany
  • Average Lowering of 25 to 40mm

Most cars don't need coil overs to improve their handling and bodyroll. For most drivers, simply replacing the shocks and springs with performance versions will meet their goals. If your shocks need replacing, and you felt the handling could be improved a little bit, this is an excellent performance suspension for you.

This item fits the following BMWs:
2004-2010 E60 BMW 525i 530i 528i

Show More Show Less
Bilstein - Corporate Logo
T#:5321
Part#: E60XISPSET
Back Ordered
$ 1,223.99

This product was last offered at the strikethrough price on
05-27-2026

$ 1,166.99 USD
Free Shipping
$ 1,166.99 USD
Free Shipping
For Sport/lowered springs; Set = 2 front + 2 rear. Will not work on cars with electronic or self leveling suspensions. Bilstein Sport Shocks offer a firmer ride quality than standard Heavy Duty (HD) shocks, these are designed for lowered vehicles and sport applications. For the performance minded driver, Sport shocks deliver absolute mastery of the road surface!

This item fits the following BMWs:
2004-2010 E60 BMW 525x 530xi 528xi 535xi - Sedan
Show More Show Less
B3 Rear Coil Spring - Priced Each
For vehicles with standard suspension
Bilstein - Corporate Logo
T#:598645
Part#: 36-161485
In Stock
$ 79.00 USD
Free Shipping
$ 79.00 USD
Free Shipping
BMW has tuned a comfortable yet performance oriented suspension system across their model offering. The springs used are a very sophisticated design with both tapered wire diameter and progressive spring rates to ensure the best possible ride quality under varying loads and conditions. Due to environmental conditions, the original coating is commonly compromised thus creating a weak point which yields to failure (cracked springs). Replace your cracked springs with replacement parts from Bilstein.
Show More Show Less

B3 Front Coil Spring - Priced Each
For vehicles with standard suspension
Bilstein - Corporate Logo
T#:598643
Part#: 37-161903
In Stock
$ 61.00 USD
Free Shipping
$ 61.00 USD
Free Shipping
BMW has tuned a comfortable yet performance oriented suspension system across their model offering. The springs used are a very sophisticated design with both tapered wire diameter and progressive spring rates to ensure the best possible ride quality under varying loads and conditions. Due to environmental conditions, the original coating is commonly compromised thus creating a weak point which yields to failure (cracked springs). Replace your cracked springs with replacement parts from Bilstein.
Show More Show Less

Bilstein - Corporate Logo
T#:344291
Part#: 19-138381
In Stock
$ 129.00 USD
Free Shipping
$ 129.00 USD
Free Shipping
Bilstein - Corporate Logo
T#:5319
Part#: E60XIHDSET
Ships in 4 Business Days
$ 1,189.99 USD
Free Shipping
$ 1,189.99 USD
Free Shipping
For stock springs; Set = 2 front + 2 rear. Will not work on cars with electronic or self leveling suspensions. The Bilstein Heavy Duty (HD) Shock is designed for use with stock springs. These shocks provide improved handling and stability without sacrificing ride comfort.

This item fits the following BMWs:
2004-2010 E60 BMW 525xi 530xi 528xi 535xi - Sedan
Show More Show Less

Bilstein - Corporate Logo
T#:384977
Part#: 24-141789KT
Ships in 4 Business Days
$ 1,189.99 USD
Free Shipping
$ 1,189.99 USD
Free Shipping

Bilstein strut/shock package for stock springs. Set includes 2 front Bilstein B6 Performance shocks and 2 rear Bilstein B6 Performance shocks. Includes top nuts and rear lower shock washers. The stock rear dust boots are re-used. The Bilstein B6 Performance Shock is designed for use with stock springs. These shocks provide improved handling and stability without sacrificing ride comfort.


This Bilstein B6 Performance shock package fits the following BMWs:

2004-2009 E60 525xi, 528xi, 530xi, 535xi, 528i xDrive, 535i xDrive

Show More Show Less
Bilstein - Corporate Logo
T#:403300
Part#: 22-138361KT
In Stock at Vendor
$ 609.99

This product was last offered at the strikethrough price on
03-25-2026

$ 536.00 USD
Free Shipping
$ 536.00 USD
Free Shipping

Bilstein strut/shock package for stock springs. Set includes 2 front Bilstein B4 OE Replacement struts and 2 rear Bilstein B4 OE Replacement shocks. Bilstein B4 Series gas pressure shocks and struts are specifically designed to be the economical choice for replacing the dampers on your vehicle. The B4 Series shocks and struts are rigorously engineered to meet OE standards and identically replicate the original ride quality of your vehicle. Shock dampening and rebound is set to match the original specifications from the factory to retain the same handling, stability, and ride comfort, but with the superior Bilstein quality for a long life and consistent performance in every condition. Lifetime warranty!

This item fits the following BMWs:
2003-2010 E60 BMW RWD Non-M models without Sport Suspension

Show More Show Less

Bilstein - Corporate Logo
T#:403298
Part#: 22-212696KT
Ships on Nov 16, 2026
$ 616.00 USD
Free Shipping
$ 616.00 USD
Free Shipping

Bilstein strut/shock package for stock springs. Set includes 2 front Bilstein B4 OE Replacement struts and 2 rear Bilstein B4 OE Replacement shocks. Bilstein B4 Series gas pressure shocks and struts are specifically designed to be the economical choice for replacing the dampers on your vehicle. The B4 Series shocks and struts are rigorously engineered to meet OE standards and identically replicate the original ride quality of your vehicle. Shock dampening and rebound is set to match the original specifications from the factory to retain the same handling, stability, and ride comfort, but with the superior Bilstein quality for a long life and consistent performance in every condition. Lifetime warranty!

This item fits the following BMWs:
2003-2010 E60 BMW RWD Non-M models with Sport Suspension

Show More Show Less

Bilstein B3 Replacement Rear Spring
Only for vehicles with standard or non-Msport suspension
Bilstein - Corporate Logo
T#:598646
Part#: 36-161409
Special Order: No Guaranteed ETA
$ 79.00 USD
Free Shipping
$ 79.00 USD
Free Shipping
As the springs age, they begin to compress or "sag" allowing the body to sit lower and slightly altering the motion of the suspension. Because of this we strongly recommend replacing these in pairs in order to ensure safe and predictable handling characteristics.
Show More Show Less
Front Spring - Priced Each
For vehicles with standard suspension
Bilstein - Corporate Logo
T#:598648
Part#: 37-161880
Special Order: No Guaranteed ETA
$ 61.00 USD
Free Shipping
$ 61.00 USD
Free Shipping
Bilstein B3 OE Replacement coil springs are designed to replace your vehicle's original springs. These coil springs are manufactured to meet all the OE dimensions, spring rates, and design types (such as miniblock or central force design). With Bilstein B3 OE Replacement coil springs, you are restoring your vehicle's suspension system function and safety to factory specifications.
Show More Show Less
Front Spring - Priced Each
For vehicles with standard suspension
Bilstein - Corporate Logo
T#:598644
Part#: 37-161897
Special Order: No Guaranteed ETA
$ 61.00 USD
Free Shipping
$ 61.00 USD
Free Shipping
Bilstein B3 OE Replacement coil springs are designed to replace your vehicle's original springs. These coil springs are manufactured to meet all the OE dimensions, spring rates, and design types (such as miniblock or central force design). With Bilstein B3 OE Replacement coil springs, you are restoring your vehicle's suspension system function and safety to factory specifications.
Show More Show Less