BMW Suspension Parts for BMW 5 Series E60 (2004-2010)

Clear BMW chassis

Please ensure your correct model is selected

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

KMAC - Corporate Logo
T#:389645
Part#: 192416-1J
In Stock
$ 380.00 USD
Free Shipping
$ 380.00 USD
Free Shipping
Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less
URO - Corporate Logo
T#:37757293
Part#: BME39FSBKIT
In Stock
$ 20.99 USD
Free Shipping on orders $49 and up

URO Strut Bellow Kit - E46 E60

URO Strut Bellow Kit - E46 E60 is designed to replace old, cracked, or torn strut bellows in your BMW, ensuring that your suspension components remain well-protected. This high-quality kit helps prevent moisture and debris from entering and damaging the shock absorbers, improving the overall longevity of the suspension system. The strut bellows are molded to OE dimensions and shape for a seamless fit, ensuring easy installation and maintaining the vehicle's original appearance.

  • Replaces cracked or torn strut bellows for improved suspension protection
  • Prevents moisture and debris from damaging shock absorbers
  • Molded to OE dimensions for easy installation and original appearance
  • Helps maintain suspension performance and durability
  • Comes with a 24-month unlimited mileage warranty
Show More Show Less
URO - Corporate Logo
T#:377324
Part#: 33326770749
Ships in 1 Business Day
$ 23.99 USD
Free Shipping on orders $49 and up
Worn bushings and trailing arms will cause a loose, clunking feeling when hitting bumps. Replace them and restore your ride and handling.

URO - Corporate Logo
T#:587846
Part#: 31126774825
Ships in 1 Business Day
$ 73.99 USD
Free Shipping
$ 73.99 USD
Free Shipping
Over the years, the road takes a serious toll on your suspension. Pot holes, speed bumps, and road hazards all contribute to a sloppy, weak suspension. To give a better feel to your driving experience, change components as they wear to improve safety and ride comfort.
Show More Show Less

URO - Corporate Logo
T#:592238
Part#: 31126774826
Ships in 1 Business Day
$ 73.99 USD
Free Shipping
$ 73.99 USD
Free Shipping
Found in the front position
URO - Corporate Logo
T#:376108
Part#: 31126760181
Ships in 1 Business Day
$ 55.99 USD
Free Shipping on orders $49 and up
Control arm with ball joint. Found in the rear position

URO - Corporate Logo
T#:376109
Part#: 31126760182
Ships in 1 Business Day
$ 55.99 USD
Free Shipping on orders $49 and up
Control arm with ball joint. Found in the rear position
KMAC - Corporate Logo
T#:31522921
Part#: 193616-6H
Special Order: No Guaranteed ETA
$ 320.00 USD
Free Shipping on orders $49 and up

KMAC - Corporate Logo
T#:389646
Part#: 192416-3L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 3 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less

KMAC - Corporate Logo
T#:389668
Part#: 193726J
Special Order: No Guaranteed ETA
$ 380.00 USD
Free Shipping
$ 380.00 USD
Free Shipping
Perfect for lowered cars that need to dial out negative camber to preserve tires. Also perfect for track cars - easily dial in toe and camber for the track for better handling. Priced per set. Fits BMW E60 E63 E65.

This item fits the following BMWs:
2004-2010  E60 BMW  525i 525xi 528i 528xi 530i 530xi 535i 535xi 545i 550i M5
2004+  E63 BMW  645ci 650i M6
2002-2008  E65 BMW  745i 745li 750i 750li 760i 760li
2000-2006  E53 BMW  X5 3.0i, X5 4.4i, X5 4.6is, X5 4.8is
Show More Show Less
KMAC - Corporate Logo
T#:389662
Part#: 193616-3L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Track, Stage 3
Bearing: PTFE-lined pillow-ball, no bushing

KMAC Stage 3 camber/caster plates are designed for track or race-only situations where comfort and noise are not the primary concerns. The Stage 3 camber plates use a pillowball bearing, solidly mounted within the camber plate for direct alignment of the strut shaft and no excess play or deflection. Stage 3 are designed to increase negative camber with their patented 'floating' adjustment that changes camber and caster together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Fitment is limited to race-only small diameter coil-over springs (not stock-type). Bearing inserts and adapters included. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
1997-2003  E39 BMW  525i 528i 530i 540i (for cars with EDC)
1999-2003  E39 BMW  M5
1995-2001  E38 BMW  740i 740il 750il (for cars with EDC)
2004-2010  E60 BMW  M5
2004-2011  E63 BMW  M6
Show More Show Less
KMAC - Corporate Logo
T#:389647
Part#: 192416-2L
Ships on Sep 9, 2026
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 2 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less


KMAC - Corporate Logo
T#:389317
Part#: 193616-2L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Street/Track, Stage 2
Bearing: PTFE-lined pillow-ball with thin polyurethane bushing

The Stage 2 KMAC plates are a mixed street/track camber/caster plate meant to be used in a variety of suspensions. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions. Bearing inserts and adapters included. The Stage 2 camber plates are shorter than a factory mount so may not be suitable for cars will little suspension travel. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2006-2008  E85 BMW  Z4 M Roadster M Coupe
Show More Show Less
URO - Corporate Logo
T#:376690
Part#: 33531133671
In Stock
$ 11.99 USD
Free Shipping on orders $49 and up
Isolates the rest of the vehicle from spring noise and vibration
URO - Corporate Logo
T#:597403
Part#: 31331093344
In Stock
$ 22.99

This product was last offered at the strikethrough price on
07-07-2026

$ 18.99 USD
Free Shipping on orders $49 and up
$ 18.99 USD
Free Shipping on orders $49 and up

URO - Corporate Logo
T#:552385
Part#: 31331091233
In Stock
$ 13.99

This product was last offered at the strikethrough price on
05-01-2026

$ 11.99 USD
Free Shipping on orders $49 and up
$ 11.99 USD
Free Shipping on orders $49 and up
Should be replaced with each new shock

URO - Corporate Logo
T#:558006
Part#: 31311139453
In Stock
$ 1.99 USD
Free Shipping on orders $49 and up
Replace your lost or cracked strut housing dust cover with this new replacement.
URO - Corporate Logo
T#:36032336
Part#: 31356757100
Ships in 1 Business Day
$ 26.99 USD
Free Shipping on orders $49 and up
$ 26.99 USD
Free Shipping on orders $49 and up
This bracket surrounds the right sway bar bushing and helps mount the sway bar to the front subframe Guaranteed fitment Replacement of failed factory sway bar link bracket restores agile vehicle handling and quiet clunk-free ride OE geometry for proper anti-roll bar function and directional stability High-quality materials and corrosion-resistant coatings for maximum durability 24 Month Unlimited Mileage Warranty
Show More Show Less

Sway Bar End Link - Priced Each
For vehicles without Dynamic Drive
URO - Corporate Logo
T#:375914
Part#: 33506781540
Ships in 1 Business Day
$ 18.99

This product was last offered at the strikethrough price on
04-15-2026

$ 15.99 USD
Free Shipping on orders $49 and up
$ 15.99 USD
Free Shipping on orders $49 and up
End links play a vital role in the suspension system. They connect the sway bar to the vehicle and keep everything tight. Symptoms of failed end links are clunking and popping sounds as well as loose steering feel over bumps.
Show More Show Less
Sway Bar Bushing - Active Sway Bars - E63 E65
For models with Active sway bars, from production date 05/2006 For models with Active sway bars
URO - Corporate Logo
T#:639598
Part#: 31356753913
Ships in 1 Business Day
$ 5.97 USD
Free Shipping on orders $49 and up
$ 5.97 USD
Free Shipping on orders $49 and up
URO Parts is one of the leading manufacturers of high quality direct replacement aftermarket components, covering a wide range of makes and models. All of their replacement parts are manufactured to ISO 9000 certification standards, so you can expect long lasting performance from URO Parts. As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform! This item fits the following BMW Chassis: E63,E65
Show More Show Less

URO Ventilation Valve - M10X1 - BMW E60 E63 E64 E65 E66
For vehicles with Dynamic Drive (S229A)
URO - Corporate Logo
T#:41661217
Part#: 37106759856
Ships in 1 Business Day
$ 88.91 USD
Free Shipping on orders $49 and up
$ 88.91 USD
Free Shipping on orders $49 and up
This is the vent valve for the Dynamic Drive sway bar

Control Arm - Left Rear Upper - 33322347993
For vehicles with a production date up to 03/2005
URO - Corporate Logo
T#:24843115
Part#: 33322347993
Ships in 1 Business Day
$ 41.99 USD
Free Shipping on orders $49 and up
$ 41.99 USD
Free Shipping on orders $49 and up
High quality replacement arm. Includes bushing, ball joint, and locking nut.
URO - Corporate Logo
T#:587221
Part#: 31126768302
Ships in 1 Business Day
$ 37.99 USD
Free Shipping on orders $49 and up
Bushings are a vital element of your suspension, as they provide an interface between two metal parts, preventing vibrations and noise in the chassis of the vehicle. Without the bushing, the metal ends of the control arm would be mounted to the frame and cause metal-to-metal contact, causing clunking. If you are experiencing vibration and clunking issues, replacing those old bushings is likely needed to restore ride quality and comfort.
Show More Show Less
URO - Corporate Logo
T#:375912
Part#: 31306781548
Ships in 1 Business Day
$ 19.99 USD
Free Shipping on orders $49 and up
Direct replacement


URO - Corporate Logo
T#:639596
Part#: 37126761022
Ships in 1 Business Day
$ 15.00 USD
Free Shipping on orders $49 and up
Sway bar bushings tend to split over time, failing to properly secure and reinforce the sway bar. If yours has begun to split or if your vehicle is more than 5 years old, it is a good idea to replace them to ensure proper sway bar operation.
Show More Show Less
Rear Ball Joint - Priced Each
Two required per vehicle, one per side.
URO - Corporate Logo
T#:373234
Part#: 33321095631
Ships in 1 Business Day
$ 23.99

This product was last offered at the strikethrough price on
05-07-2026

$ 17.99 USD
Free Shipping on orders $49 and up
$ 17.99 USD
Free Shipping on orders $49 and up
The ball joint is an essential connection in the suspension of your vehicle. It gives an attachment point for the steering knuckle and allows everything to turn and articulate properly.
URO - Corporate Logo
T#:375911
Part#: 31306781547
Ships in 1 Business Day
$ 15.32 USD
Free Shipping on orders $49 and up
The tie rods in your vehicle translate the movement of the steering wheel through the rack and to your wheels. Oftentimes when a vehicle is beginning to experience some higher mileage, the tie rod ends begin to fail. This causes slop in the steering wheel and knocks and creaks in the steering system. Catastrophic tie rod end failure can cause serious damage and danger as the tie rod end keeps the wheel path straight.
Show More Show Less

URO - Corporate Logo
T#:592333
Part#: 31356770003
Ships in 1 Business Day
$ 5.99 USD
Free Shipping on orders $49 and up
Sway bar bushings are a vital part of your vehicle's suspension. Over time, the suspension bushings wear down, which can cause sloppy handling characteristics. Get that tight handling feel back with a new set of sway bar bushings.
Show More Show Less

URO - Corporate Logo
T#:37757287
Part#: 33306772242
Back Ordered
$ 51.99 USD
Free Shipping on orders $49 and up
Over time, road conditions take a toll on your suspension. Potholes, speed bumps, and other hazards contribute to wear, leading to a weak and unresponsive ride. To maintain safety and comfort, replace worn components as needed. One crucial component to replace is the control arm. After years of use, the non-serviceable ball joints and other parts can deteriorate. Since some components cannot be replaced individually, the entire control arm must be swapped out. When replacing any front or rear suspension parts, it’s best to do so in pairs (both left and right) or inspect other components prone to failure. This ensures optimal performance and extends the lifespan of replacement parts. Browse your vehicle’s suspension section to identify any additional parts that may need attention.
Show More Show Less