BMW Performance Chips & Software for BMW 5 Series E60 (2004-2010)

The new MHD Wireless OBDII WiFi Flash Adapter V2 allows you to reliably load flash maps to your BMW including JB4 back-end flash maps faster and easier than ever before. Just pair it with your Android or Apple phone and plug it into the OBDII port when you want to flash or use any MHD features. Compatible with E, F, or G Chassis BMWs with the following engines: N54, N55, S55, B58, S58, S63, & N13

NOTE: Additional engines & vehicles may be supported with Non-MHD applications such as Bimmercode or xHP. If your engine is not listed above, please check with the app you intend to use for compatibility with your vehicle.

MHD Flash Adapter Features & Benefits

Compatible with the MHD Flashing Platform,  BimmerCode, xHP, and many other wifi diagnostic apps

Load both MHD off-the-shelf maps and custom flash maps (available for limited applications - N54, N55, S55, B58, S58, S63, N13)

Faster flash times compared to wired OBDII cable

Uses Wifi for a reliable connection

Applications

E Chassis BMW

F Chassis BMW

G Chassis BMW

BimmerCode App & Info

All you need for coding your car with BimmerCode is one of the supported MHD OBD adapters and the BimmerCode phone app - https://bimmercode.app/

BMW OBD2 Cable K+DCAN Cable - FTDI FT232RL Style provides a reliable solution for connecting your BMW to a laptop or tablet for advanced diagnostics and coding using various software options. This high-quality cable is designed for use with BMW vehicles, offering versatile compatibility and ease of use.

• Comprehensive Connectivity: Enables diagnostics and coding for a wide range of BMW models by connecting to a laptop or tablet.
• Supports Multiple CAN Protocols: Includes support for D-CAN, PT-CAN, and K-CAN operation, with a convenient switch for selecting the appropriate protocol.
• Driver Software Included: Comes with a CD containing the necessary driver software for seamless setup.
• Wide Vehicle Compatibility: Compatible with numerous BMW models, including E60, E63, E64, E83, E81, E87, E82, E88, E90, E91, E92, E93, E70, E71, E72, R55, R56, R57, R50, R52, R53, E46, E53, and E65, E66, E67. Also supports 1995-1998 vehicles without K-Line.
• Diagnostic and Coding: Ideal for performing diagnostics and coding tasks, although diagnostic and coding software must be purchased separately.

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor is designed for accurate measurement of fluid and air pressure in high-performance applications. Ideal for monitoring a variety of pressures including fuel, boost, coolant, and oil, this sensor provides crucial data for optimizing vehicle performance.

Featuring a 2-Pin DTM connector, this sensor offers a direct plug-and-play connection to the ReFlex+ harness, ensuring a seamless integration with flash platforms via CANbus. Each ReFlex+ unit can support up to two of these sensors, allowing for comprehensive monitoring.

• Versatile Measurement: Capable of measuring fuel pressure, boost, coolant, oil, and other fluids.
• Easy Integration: 2-Pin DTM connector provides a direct plug-and-play connection.
• Comprehensive Monitoring: Supports integration of up to two sensors per ReFlex+ unit.
• High-Performance Design: Designed to handle high pressures and deliver accurate readings.

For optimal installation, consider using the 3/8 Female to 3/8 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on an ethanol sensor or the 5/16 Female to 5/16 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on a factory fuel line. Please note that the ethanol sensor is not included.

Transform your vehicle's performance with the Sprint Booster, a state-of-the-art electronic device designed to deliver swift and instantaneous acceleration, effectively eliminating any delays. Featuring a convenient dash-mounted selectable switch, you can effortlessly switch between stock, moderate, and aggressive acceleration modes by simply pressing an LED button.

In the era of modern automobiles, traditional throttle cables have largely been replaced by electronic control modules. These modules translate pedal pressure into electronic signals, allowing the vehicle's computer to precisely control acceleration. However, the Electronic Throttle Cable (ETC), also known as the "Drive by Wire" system, often suffers from delayed response and subdued acceleration, particularly during uphill starts, rapid gear changes, or when passing other vehicles.

Installing the Sprint Booster is a straightforward process – simply plug it in between your accelerator pedal module and the harness. The difference is instantly noticeable the moment you press the throttle. Should you ever wish to revert to your stock setup, removal is equally uncomplicated.

Rest easy with the protection of a money-back guarantee that allows you to experience the performance difference without any risk.

New to V3: 36 Acceleration Programs, Valet Mode, Pedal Lock Mode**

BMW N54 JB4 2 Step / NLS Relay is a powerful add-on for BMW N54 engines that enables your JB4 to “2-step” by cycling power to the ignition coils, allowing for quick boost build-up even when the engine is not under load. Ideal for both manual and automatic transmissions, this relay is perfect for creating dramatic sound effects and for launching with manual transmissions. Additionally, it provides No Lift Shifting (NLS) capability for manual cars, enhancing performance and shifting speed.

• Enables 2-step functionality for boost control, enhancing launch performance
• No Lift Shifting (NLS) for seamless gear changes in manual transmissions
• Compatible with both manual and automatic BMW N54 models
• Easy installation with updated JB4 firmware (v32_15 for twin turbo or v13_7 for single turbo) - clutch wire no longer required
• Requires JB4, back-end flash map, and either a BMS data cable or JB4 mobile connect kit