Select Vehicle
BMW
Mini
Purpose
Category
- Intake Manifold Upgrades & Components (DISA, Vacuum, CCV
Create an account to be able to build Wish Lists.
Please ensure your correct model is selected
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-07-2026
Introduced in the late 1990s, the DISA (Differenzierte Sauganlage or differentiated intake system) valve plays a crucial role in adjusting the intake manifold's effective length. This mechanism incorporates a flap that opens and closes in response to DME inputs, optimizing airflow for both high and low RPM use.
Although the DISA system marked a significant leap in engine efficiency, it has become a common point of failure in older BMW models. The flap is secured to the body using a plastic pin, prone to degradation over time due to heat exposure. A malfunctioning DISA valve can lead to various issues, ranging from power loss to severe engine damage.
Signs of DISA valve failure include:
Audible rattling from the upper intake manifold. Power loss during different RPM/load conditions. Decreased fuel efficiency due to improper flap operation or valve failure. Illuminated SES/Service Engine Soon light, indicating lean/rich conditions or misfires (common DTCs include: P1083, P1084, P1347, P1348). Potential valvetrain damage as a result of flap pin failure, leading to plastic and metal debris circulating in the engine. If you notice any of these symptoms, it's crucial to replace the DISA valve promptly to avoid further engine complications. Continued use with a faulty DISA valve can escalate to extensive engine repairs or replacement.
Fortunately, Febi-Bilstein offers a high-quality OE DISA valve designed for seamless integration, ensuring optimal fit, finish, and functionality. Installing this valve is straightforward, requiring basic hand tools and less than an hour of your time. Restore your engine's performance and safeguard against major damage by upgrading to a new DISA valve from Febi-Bilstein.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Vargas Turbo has you covered when you are installing a custom turbo setup. With all of the adapters you need and all the valves necessary, the only real limiting factor is your imagination!
The VTT PCV Flapper delete is used to get rid of the factory flapper, and add a -10 fitting on N54 powered vehicles. This will allow you to run a single or dual external catch can, or your own custom set up.
This fitting is made from 6061-T6 aircraft aluminum anodized black and comes with O-ring, and a stainless steel holding clip.
This part fits the following BMW engines:
2006-2012 N54
Vargas Turbo has you covered when you are installing a custom turbo setup. With all of the adapters you need and all the valves necessary, the only real limiting factor is your imagination!
This is a 1/2" (fits -8AN hos perfectly as well) CNC Billet check valve that can be used for a variety of uses including a vacuum/boost check valve when removing the stock PCV system, and still wanting to run the vacuum to the crankcase. Rated at over 100 psi, with a cracking psi of .25psi.
This part fits the following BMW engines:
2006-2012 N54
This product was last offered at the strikethrough price on
05-07-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Vargas Turbo has you covered when you are installing a custom turbo setup. With all of the adapters you need and all the valves necessary, the only real limiting factor is your imagination!
This is the adapter fitting that is required to convert your N54 to external PCV if you want to keep your crankcase under vacuum at idle, and anytime you have a vacuum condition in your intake manifold. They are made from 6061-T6 with black anodizing for a long-lasting finish. Includes complete adapter, with all o-rings, and retaining clip.
This must be used in conjunction with the Vargas billet check valve, and PCV delete fitting or requires plugging of the intake PCV ports. Installs inline on the throttle body, and adds a -8AN male to adapt to a catch cans, or any custom set up.
Made from 6061-T6 with black anodizing for a long-lasting finish. Includes complete adapter, with all o-rings, and retaining clip
This part fits the following BMW engines:
2006-2012 N54
This product was last offered at the strikethrough price on
05-29-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026