BMW Engine Parts for BMW 5 Series E60 (2004-2010)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Turner Motorsport - Corporate Logo
T#:56110301
Part#: 060233LA01
In Stock
New Item
$ 49.99 USD
Free Shipping
$ 49.99 USD
Free Shipping

If your M50, M52, or M54 engine takes a few seconds to build oil pressure after sitting, there's a good chance that your factory oil filter housing drain back valve has failed. Over time, the factory plastic check valve degrades, allowing oil to drain completely out of the housing and back into the oil pan while sitting. Every cold start essentially becomes a dry start, resulting in a loud ticking noise and causing unnecessary wear on your engine's internals.

Unfortunately, BMW does not offer this check valve as a standalone part, forcing you to purchase a costly, complete oil filter housing assembly just to fix one failed plastic component. Thankfully, our team of BMW enthusiasts took note of this common failure mode and designed a permanent, cost-effective fix.

Our Billet Oil Filter Housing Drain-Back Valve is designed as a direct-fit upgrade for your factory oil filter housing. CNC-machined from high-strength billet aluminum, this upgraded valve restores positive sealing to keep the oil filter housing fully primed. Maintaining this hydraulic prime ensures rapid oil pressure stabilization upon startup, directly mitigating dry-start bearing wear and top-end lifter starvation without requiring the purchase of a complete OEM housing assembly.

Show More Show Less
Turner Motorsport - Corporate Logo
T#:54852009
Part#: 059043LA04KT
In Stock
New Item
$ 4.99 USD
Free Shipping
$ 4.99 USD
Free Shipping

Over time, the factory valve cover hardware on M50, M50TU, M52, M52TU, M54, S50 (US), and S52 engines is subjected to continuous heat cycling, oil vapor, and moisture, causing original cap nuts to oxidize, corrode, or thread-strip during routine maintenance. Our Polished Valve Cover Cap Nut serves as a direct replacement designed to address these common failure points while improving upon overall engine bay aesthetics.

Because maintaining precise gasket compression is critical to preventing oil leaks, these cap nuts and washers are machined directly to OE-style dimensions. This exact fitment allows for direct compatibility with original and replacement valve cover studs (see T#55317643) and ensures the hardware can be torqued precisely to OEM specifications without guesswork. Manufactured to grade 8.8 structural strength standards, the hardware maintains the necessary clamp force required under normal and high-performance engine operating conditions.

To resist corrosion, both the cap nut and washer undergo an electroless nickel plating process during production. Unlike standard zinc coatings that dull or rust over time, electroless nickel provides a uniform layer of corrosion resistance that withstands long-term chemical exposure and extreme temperature swings while giving the hardware a polished, high-end appearance. Each cap nut assembly includes an OE rubber washer seal, ensuring a tight, leak-free barrier that prevents oil from escaping through the mounting studs.

Show More Show Less
Turner Motorsport - Corporate Logo
T#:55317643
Part#: 059043LA03
In Stock
New Item
$ 4.99

This product was last offered at the strikethrough price on
09-29-2026

$ 3.99 USD
Limited Qty Sale
Free Shipping
$ 4.99

This product was last offered at the strikethrough price on
09-29-2026

$ 3.99 USD
Limited Qty Sale
Free Shipping
This M7/6x29.5 threaded stud is used for securing the valve cover to the cylinder head on all M50, M50TU, M52, M52TU, M54, S50 (US), and S52 engines. Despite this crucial role in engine sealing and construction, BMW decided to discontinue this vital factory part in 2023. Recognizing the gap left by the discontinued factory hardware, our team of BMW enthusiasts reverse-engineered the original part—improving its materials and finish to bring a higher-quality, long-lasting solution to the market. Manufactured from high-strength Grade 8.8 steel and finished with a protective zinc coating, this upgraded stud delivers exceptional durability, reliable torque retention, and exceptional corrosion resistance under the hood.
Show More Show Less

N54/N55 Low Temp Oil Thermostat Kit - 70c
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:52621839
Part#: 008731KT1
In Stock
New Item
Sale - Save 23% $ 74.98

This product was last offered at the strikethrough price on
05-03-2026

$ 57.74 USD
Free Shipping on orders $49 and up
Sale - Save 23%
$ 74.98

This product was last offered at the strikethrough price on
05-03-2026

$ 57.74 USD
Free Shipping on orders $49 and up

Upgrade your stock oil cooler thermostat for improved performance. Swap your factory 110-degree Celsius thermostat for a new 70-degree Celsius version for faster oil flow and extended temperature control. With oil temperatures reaching 230 degrees Fahrenheit by the time your factory thermostat opens, initiating oil flow at lower temperatures proves more effective than attempting to cool down already elevated temperatures.

Utilizing a factory-style thermostat, this upgrade can be used in all weather conditions and allows your engine to warm up properly, unlike thermostat bypass kits.

Kit contents:​

Lower temperature thermostat - 70c (158F) vs Factory 110c (230F)
Low temp thermostat spring

Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:51813315
Part#: VTT-TI-DRAIN
Ships in 1-3 days
New Item
$ 31.99 USD
Free Shipping
$ 31.99 USD
Free Shipping
The VTT Burnt Titanium Magnetic Oil Drain Plug is a critical upgrade for any performance enthusiast looking to maximize engine longevity.
Genuine BMW Oil Pan Gasket With Oil Pan Bolt Set - N55
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:56038085
Part#: 11137600482KT4
In Stock
New Item
$ 131.99 USD
Free Shipping on orders $49 and up
This Hardware & Gasket Refresh Kit takes the guesswork out of maintenance. This kit bundles a high quality replacement oil pan gasket with a fresh, complete set of factory spec aluminum hardware. Whether you are dropping the subframe for a preventative overhaul or chasing down an active oil leak
Show More Show Less

Bosch Starter Motor With Hardware
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:56110332
Part#: SR0492NKT4
In Stock
New Item
$ 273.99

This product was last offered at the strikethrough price on
08-14-2026

$ 261.99 USD
Free Shipping on orders $49 and up
$ 261.99 USD
Free Shipping on orders $49 and up
At the core is a brand-new Bosch Starter Motor, engineered to withstand extreme operating conditions while delivering immediate cranking speed. This kit includes also the required Genuine BMW Aluminum Mounting Screw Set.
Show More Show Less
Fuel Injector Replacement Kit - N52
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:53044116
Part#: 13537531634RKT2
Ships on Oct 30, 2026
New Item
Sale - Save 16% $ 318.99

This product was last offered at the strikethrough price on
05-03-2026

$ 268.69 USD
Free Shipping on orders $49 and up
Sale - Save 16%
$ 318.99

This product was last offered at the strikethrough price on
05-03-2026

$ 268.69 USD
Free Shipping on orders $49 and up
Restore engine performance and drivability by replacing those old, high mileage fuel injectors. Includes injector clips.

Vargas Oil Feed Adapter - BMW N54
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:51778141
Part#: VTT-N54-OFA
Ships in 10 Business Days
New Item
$ 41.99 USD
Free Shipping
$ 41.99 USD
Free Shipping
The Vargas Oil Feed Adapter is designed to replace the stock front turbo oil feed line with a robust, CNC-machined solution.

Elring Oil Pan Gasket And CRP Hardware Set
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:56218592
Part#: 1137548031ELRKT2
In Stock
New Item
$ 86.99 USD
Free Shipping on orders $49 and up
This Oil Pan Refresh Kit pairs a high tier Elring sealing gasket with the complete factory spec aluminum bolt set required for proper reassembly.
Vargas Turbo Technologies - Corporate Logo
T#:52270240
Part#: GARROUTT4G4045
Ships in 10 Business Days
New Item
$ 37.99 USD
Free Shipping
$ 37.99 USD
Free Shipping
Upgrade your turbocharger exhaust connection with the VTT-FAB 86mm V-Band Outlet Flange, designed for the Garrett G40-G45 frame sizes.
Vargas Titanium Valve Cover Hardware Upgrade - Black - BMW B58, N55, ...
For vehicles with VTT Valve Cover
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:52129732
Part#: VTT-TI-BOLTS-2-B
Back Ordered
New Item
$ 59.99 USD
Free Shipping
$ 59.99 USD
Free Shipping
The VTT Titanium Valve Cover Hardware Kit is the ultimate finishing touch for your BMW N55, S55, or B58 engine.


Oil & Level Sensor Service Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:57543752
Part#: 12617607909KT4
In Stock
New Item
$ 330.99

This product was last offered at the strikethrough price on
09-01-2026

$ 240.99 USD
Free Shipping on orders $49 and up
$ 240.99 USD
Free Shipping on orders $49 and up
Maintain peak engine lubrication and precise oil level telemetry with this complete Oil & Level Sensor Service Kit. Engineered for enthusiasts who demand reliable performance on the street or track, this kit features Liqui Moly synthetic motor oil paired with an OEM spec oil filter to maintain stable oil pressure and minimize internal friction. To resolve erratic oil level warnings and lower pan seepage, the bundle includes a responsive Bremmen oil level sensor, new securing nuts, and a fresh drain plug. Perform a clean, comprehensive fluid service while permanently fixing oil monitoring faults in one pass.
Show More Show Less
Oil Pan Gasket & Level Sensor Refresh Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:57543746
Part#: 12617607909KT3
In Stock
New Item
$ 308.99

This product was last offered at the strikethrough price on
10-02-2026

$ 226.99 USD
Free Shipping on orders $49 and up
$ 226.99 USD
Free Shipping on orders $49 and up
Protect your engine's lubrication system and maintain critical track day telemetry with a complete Oil Pan Gasket & Level Sensor Refresh Kit. Aged oil pan gaskets and oil level sensors are notorious failure points that lead to messy leaks, loss of fluid, and inaccurate oil level readings under hard driving conditions. This complete service package supplies a precision molded pan gasket, an OEM spec oil level sensor, brand new single use pan bolts, and fresh sensor fasteners. Designed to restore factory sealing integrity and precise instrument cluster readings, this kit provides everything needed for a clean, permanent repair.
Show More Show Less
King Bearings S85 Performance Rod Bearing Replacement Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:56218616
Part#: CR1057GPCKT2
In Stock
New Item
$ 1,432.99 USD
Free Shipping on orders $49 and up
At the heart of this kit are King's S85 Coated & Graded GPC rod bearings which are engineered to handle high thermal loads, provide superior oil film retention, and offer enhanced protection during cold starts and high RPM runs.
Show More Show Less


Ultimate Valve Cover Gasket Kit - With Hardware
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:57761578
Part#: 11120030496KT4
In Stock
New Item
$ 236.76 USD
$ 236.76 USD
This all-inclusive Valve Cover Service Kit eliminates the guesswork by combining complete factory-spec sealing with show-quality Turner Motorsport hardware.
Packaged by Turner - Corporate Logo
T#:56218619
Part#: CR1057GPCXKT2
In Stock
New Item
$ 1,432.99 USD
Free Shipping on orders $49 and up
At the heart of this kit are King's S85 Coated & Graded GPC rod bearings which are engineered to handle high thermal loads, provide superior oil film retention, and offer enhanced protection during cold starts and high-RPM runs
Show More Show Less

Packaged by Turner - Corporate Logo
T#:56038088
Part#: 11137600482KT5
In Stock
New Item
$ 281.52 USD
Free Shipping on orders $49 and up
This overhaul kit tackles the oil pan leak head-on while giving you a complete, high-performance oil service in one shot. It features a heavy-duty oil pan gasket paired with the mandatory single-use aluminum stretch bolts that must be replaced during installation.
Show More Show Less
Bosch Oxygen Sensors - Bank 1 And 2 Pre-Cat - N52
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:56110313
Part#: 11787558055KT
In Stock
New Item
$ 307.99

This product was last offered at the strikethrough price on
08-13-2026

$ 304.99 USD
Free Shipping on orders $49 and up
$ 304.99 USD
Free Shipping on orders $49 and up
Your engine's air fuel ratio needs to be dead on. Worn out factory pre-cat oxygen sensors delay vital data to the DME, leading to sub optimal fueling, lost horsepower, and dangerous hesitation under load.
Show More Show Less

WPC Performance Rod Bearing Replacement Kit - Dry
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:57267800
Part#: 11247838088DKT
In Stock
New Item
$ 994.99

This product was last offered at the strikethrough price on
10-12-2026

$ 993.83 USD
Free Shipping on orders $49 and up
$ 993.83 USD
Free Shipping on orders $49 and up

Active Autowerke - Corporate Logo
T#:57616348
Part#: RTF-1L
Ships in 3 Business Days
New Item
7% off MSRP $ 140.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 130.00 USD
Free Shipping
7% off MSRP
$ 140.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 130.00 USD
Free Shipping
Rotrex superchargers utilize a unique traction drive system that sets it apart from other centrifugal-style superchargers. For best performance, Rotrex recommends replacing this fluid every 50,000 miles. This bottle of traction fluid is plenty enough for one supercharger service (typically 750ml).
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:52270248
Part#: GCL135BLA
Ships in 10 Business Days
New Item
$ 2,789.99 USD
Free Shipping
$ 2,789.99 USD
Free Shipping
For N54 owners looking to replace aging factory units or seeking a reliable path to high horsepower, the VTT GC-Lite 2.0 is the ultimate "stock location" solution.
Vargas Turbo Technologies - Corporate Logo
T#:52094551
Part#: VTT-DCS-EWG-ONLY
Ships in 10 Business Days
New Item
$ 839.99 USD
Free Shipping
$ 839.99 USD
Free Shipping
The Universal DCS System is the ultimate boost control solution for any vehicle, regardless of whether it came with factory electronic wastegate control.


Vargas "Spline Lock" Crank Hub Solution - BMW N55 & S55
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:51918889
Part#: VTT-NS55CHSCP
Ships in 10 Business Days
New Item
$ 889.99 USD
Free Shipping
$ 889.99 USD
Free Shipping
The VTT Spline Lock Crank Hub Solution represents a massive leap in drivetrain engineering by moving away from friction-based or pinned interfaces.
Vargas Coil Hold Down Kit - Gold - BMW N54
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:51918876
Part#: VTT-N54CBGOLD
Ships in 10 Business Days
New Item
$ 112.99 USD
Free Shipping
$ 112.99 USD
Free Shipping
Upgrade your N54 engine bay with the VTT Stock Style Coil Hold Down Kit in Billet Gold.
Vargas Modular PCV/Catch Can Single Can - BMW N54
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:51813312
Part#: VTT-OCC-1-SINGLE
Ships in 10 Business Days
New Item
$ 157.99 USD
Free Shipping
$ 157.99 USD
Free Shipping
The VTT Single Catch Can Kit is the answer for BMW N54 owners looking to clean up their intake tract and stop oil-related smoking issues.

Vargas Turbo Technologies - Corporate Logo
T#:52129721
Part#: VTTVCOCCCOMBG
Ships in 10 Business Days
New Item
$ 1,859.99 USD
Free Shipping
$ 1,859.99 USD
Free Shipping
Upgrade your engine’s reliability and ventilation with the VTT "All You Need" Kit, featuring the only gold valve cover currently on the market for the N54.

Vargas EWG Actuator To Garrett G25-G35 Housing Bracket - BMW EWG G25/...
For vehicles with Electronic Waste Gate
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:51778114
Part#: VTT-FAB-BMW-EWG-
Ships in 10 Business Days
New Item
$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping
The Vargas EWG Actuator Bracket is the definitive solution for enthusiasts looking to merge BMW’s advanced factory EWG control with the high-performance capabilities of Garrett G-Series turbochargers.
Show More Show Less
Vargas Stage 3 VTT VTX-R60 - Black - BMW N54 "Limited Fitment" ...
Limited Fitment; Contact Sales to Specify Model Before Ordering
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:52305462
Part#: S32VTXR60BK
Ships in 10 Business Days
New Item
$ 10,859.99 USD
Free Shipping
$ 10,859.99 USD
Free Shipping
Transform your BMW into a true street or track monster with the VTT N54 Stage 3 VTX-R Twin Turbo Kit.

Vargas Cylinder Head Outlet Coolant Adapter - BMW N54
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:51813338
Part#: VTT-N54-CAO
Ships in 10 Business Days
New Item
$ 31.99 USD
Free Shipping
$ 31.99 USD
Free Shipping
Engineered for high-performance BMW builds, the Vargas Coolant Adapter replaces the weak factory plastic neck located at the front of the cylinder head.
VTT GC-Lite 2.0 Stock Location Turbocharger - Black - BMW N54 RHD ...
For Right Hand Drive models only
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:52270267
Part#: GCLRHDBLK
Ships in 10 Business Days
New Item
$ 2,619.99 USD
Free Shipping
$ 2,619.99 USD
Free Shipping
For the N54 enthusiast who demands race-car power without sacrificing the daily-driver feel, the VTT GC-Lite 2.0 is the definitive choice.

Vargas Turbo Technologies - Corporate Logo
T#:52094552
Part#: VTT-DCS-EWG-W-AC
Ships in 10 Business Days
New Item
$ 1,049.99 USD
Free Shipping
$ 1,049.99 USD
Free Shipping
the VTT DCS Billet Adapter with BMW Actuator is the definitive solution for converting to an electronic external wastegate.

VTT -6 Dual Drain Valves - VTT Modular Catch Cans with -6 ORB bottom ...
For vehicles with VTT Modular PCV/Catch Can Systems
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:52270288
Part#: OCC1DUADRAVAL
Ships in 10 Business Days
New Item
$ 53.99 USD
Free Shipping
$ 53.99 USD
Free Shipping
Upgrade your engine bay’s efficiency with the Vargas Turbo Technologies -6 Dual Drain Valve system.
Vargas Crank/Vibration Damper Bolts - M10 x 1.5
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:51778130
Part#: VTT-BMW-DAMPER-B
Ships in 10 Business Days
New Item
$ 157.99 USD
Free Shipping
$ 157.99 USD
Free Shipping
Protect your investment with the VTT/ARP 8740 Crank Vibration Damper Bolt kit.
Vargas Stage 3 VTT VTX-R63 - Black - BMW N54 "Limited Fitment" ...
Limited Fitment; Contact Sales to Specify Model Before Ordering
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:52305463
Part#: S32VTXR63BK
Ships in 10 Business Days
New Item
$ 10,859.99 USD
Free Shipping
$ 10,859.99 USD
Free Shipping
Engineered for the N54 owner seeking "World Record" caliber performance, the Vargas Stage 3 VTX-R63 Black Kit is a masterclass in turbocharger optimization.


Vargas Turbo Technologies - Corporate Logo
T#:52270294
Part#: SILCPN54HKS2
Ships in 10 Business Days
New Item
$ 464.99 USD
Free Shipping
$ 464.99 USD
Free Shipping
Upgrade your N54’s breathing capabilities with the VTT Silicone Charge Pipe, specifically configured for enthusiasts running an HKS BOV.
Vargas USB To Serial For HPFP Controller - BMW N54
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:51778112
Part#: N54-USB-SERIAL-H
Ships in 10 Business Days
New Item
$ 37.99 USD
Free Shipping
$ 37.99 USD
Free Shipping
Take full control of your N54’s fueling system with the Vargas Turbo Technologies USB to Serial adapter.
Vargas Front Coolant Plug - BMW N54
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:51778142
Part#: VTT-N54-FCP
Ships in 10 Business Days
New Item
$ 27.99 USD
Free Shipping
$ 27.99 USD
Free Shipping
The Vargas Front Coolant Plug is specifically engineered to provide a leak-free solution for blocking off the unused front water ports on the engine block.

Vargas "Spine Lock" Crank Hub - BMW N55/S55
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:51918887
Part#: VTT-NS55CHO
Ships in 10 Business Days
New Item
$ 819.99 USD
Free Shipping
$ 819.99 USD
Free Shipping
The Vargas Spline Lock Crank Hub is the solution for BMW owners seeking to push their N55 or S55 engines to the limit without the fear of catastrophic timing failure.

Vargas Coil Hold Down Kit - Clear Coat - BMW N54
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:51918877
Part#: VTT-N54CBRAW
Ships in 10 Business Days
New Item
$ 112.99 USD
Free Shipping
$ 112.99 USD
Free Shipping
Upgrade your N54 engine bay with the VTT Stock Style Coil Hold-Down Kit, the ultimate marriage of form and function.
Vargas Low Side PCV Fitting - BMW N54
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:51778126
Part#: VTT-OCC-1-LOW-SI
Ships in 10 Business Days
New Item
$ 53.99 USD
Free Shipping
$ 53.99 USD
Free Shipping
The Vargas Low Side PCV Fitting is the essential upgrade for BMW owners looking to optimize their crankcase ventilation without replacing the factory valve cover.

Vargas Billet Motor Mount Inserts - BMW N20/N54/N55
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:51918860
Part#: VTT-INSERT-4
In Stock
New Item
$ 434.99 USD
Free Shipping
$ 434.99 USD
Free Shipping
The VTT Billet Motor Mount Insert Kit is for BMW N20/N54/N55 owners who want to eliminate the excessive engine pitch and drivetrain slop.
Performance Connecting Rod Bolt And Bearing Kit - S85
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:55317700
Part#: S85RBKT2
Ships in 1-2 days
New Item
$ 1,103.00 USD
Free Shipping on orders $49 and up
From the factory, the S85’s rod bearing clearances are notoriously tight. Over time, this lack of adequate oil clearance leads to premature wear, accelerated friction, and the looming threat of catastrophic engine failure.
Show More Show Less

Turbos and Turbocharger Installation Kit - N54
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:55317702
Part#: 13712247398KT5
Ships in 10 Business Days
New Item
$ 1,869.81

This product was last offered at the strikethrough price on
09-10-2026

$ 1,869.38 USD
Free Shipping on orders $49 and up
$ 1,869.38 USD
Free Shipping on orders $49 and up
Are your factory N54 turbos plagued by the dreaded wastegate rattle, or worse, starting to blow smoke? Don't just replace them—upgrade your ultimate driving machine with the ultimate DIY refresh kit.
Show More Show Less

VTT Valve Cover Gasket - BMW N54 w/ VTT VC
For vehicles with VTT Valve Cover
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:52129724
Part#: VTT-VC-GASKET-N5
Ships in 10 Business Days
New Item
$ 31.99 USD
Free Shipping
$ 31.99 USD
Free Shipping
The VTT N55/S55 replacement gasket is a high-performance sealing solution for the N55 and S55 (EWG) aluminum valve covers.
Vargas Turbocharger Replacement - BMW E8X, E9X RHD N54
For Right Hand Drive models only
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:52305491
Part#: STK1NWRHBK
Back Ordered
New Item
$ 1,889.99 USD
Free Shipping
$ 1,889.99 USD
Free Shipping
The Vargas Replacement Kit is the definitive solution for BMW owners looking to replace failing turbos while also addressing their inherent weaknesses.